Log in

Relevant bibliographies by topics / CAE simulation / Dissertations / Theses

To see the other types of publications on this topic, follow the link: CAE simulation.

Dissertations / Theses on the topic 'CAE simulation'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'CAE simulation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Staffas, Kristin. "CAE Sun Simulation - Thermo Structural Coupling." Thesis, KTH, Numerisk analys, NA, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-287366.

Full text

Abstract:

Deformation of materials due to heat exposure can be a challenge in vehicle design. Sun exposure and heat build up in the vehicle cabin contribute to accelerated aging of the materials used. To understand how this process affects the durability, numerical simulation is an important tool. This thesis work investigates whether it is possible to, with weather data and knowledge of how a car is used, simulate the deformation process of the trim parts due to heat exposure from the sun. To answer this question, two simulation methods have been compared: The first method is to only look at the aging

APA, Harvard, Vancouver, ISO, and other styles

2

Paul, Steffen. "Spritzgußsimulation als Kopplungselement von CAD und CAE." Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-142037.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Song, Yongle. "Optimum design and 3D CAD/CAE simulation of spiroid and worm gears." Thesis, Nottingham Trent University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.369311.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhan, Dongan. "Theoretical investigation and 3D CAD/CAE simulation of globoid and cylindrical worm-gear drives." Thesis, Nottingham Trent University, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.415123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Runge, Torsten, and Kondragunda Narendra. "Teamcenter Simulation Process Management." Technische Universität Chemnitz, 2018. https://monarch.qucosa.de/id/qucosa%3A21532.

Full text

Abstract:

Manage your simulation processes, data, tools and workflows The pressure to shorten time-to-market while improving product performance and quality is driving the increased use of simulation throughout the product lifecycle. However, without some form of simulation data management, simulation itself can become a process bottleneck. The Teamcenter simulation process management solution has been specifically designed to help you get control of your simulation data and processes in the context of an overall product lifecycle management (PLM) system. With Teamcenter, you can avoid common problems s

APA, Harvard, Vancouver, ISO, and other styles

6

Denninger, Daniel, Maik Berger, Torsten Meyer, and Rainer Wallasch. "Simulation und Analyse zur Ermittlung kinematischer Parameter für die CAE-gestützte Mechanismensynthese." Universitätsbibliothek Chemnitz, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-114697.

Full text

Abstract:

Charakterisierung eines textilen Halbzeuges aus Maschenstruktur Technologiedefinition zu einem ausgewählten Verfahren zum Erzeugen der Maschenstruktur Analyse und Simulation des Antriebskonzeptes einer Flachraschelmaschine Synchronisation technologiebedingter Fertigungsschritte und Ableiten von Randbedingungen für die Mechanismensynthese

APA, Harvard, Vancouver, ISO, and other styles

7

Placzek, Roman. "Vliv tlaku v komoře vzorku na podmínky diferenciálního čerpání." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218730.

Full text

Abstract:

The paper primarily outlines fundamental issues of electron microscopy. The paper follows with analysing pumping of gas into EREM sample chambers at various pressure levels by using SolidWorks Flow Simulation in SolidWorks system. The results of analyses are assessed with respect to requirements so that the pressure in the track of primarily electrons is as low as possible with the view to reduce probability of its scattering.

APA, Harvard, Vancouver, ISO, and other styles

8

Sellgren, Ulf. "Simulation-driven design : Motives, Means, and Opportunities." Doctoral thesis, KTH, Maskinkonstruktion, 1999. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-2875.

Full text

Abstract:

Efficiency and innovative problem solving are contradictory requirements for productdevelopment (PD), and both requirements must be satisfied in companies that strive to remainor to become competitive. Efficiency is strongly related to ”doing things right”, whereasinnovative problem solving and creativity is focused on ”doing the right things”.Engineering design, which is a sub-process within PD, can be viewed as problem solving or adecision-making process. New technologies in computer science and new software tools openthe way to new approaches for the solution of mechanical problems. Product

APA, Harvard, Vancouver, ISO, and other styles

9

Sodomka, Pavel. "Optimalizace chlazení koncentrátorového fotovoltaického článku pomocí systémů CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-221145.

Full text

Abstract:

This thesis deals with the optimization of the concentrate photovoltaic cell cooling system through the CAE system. In the theoretical part, the thesis treats there the problematic of the photovoltaics and focuses on the concentrator cell and its problems coupled with the cooling system and the sink of heat. In the next theoretic part, it also analyses there the problematic of the conduit and transfer of heat. Moreover, the mathematical description of the fluid flow, the finite-volume method that is used in the SolidWorks Flow Simulation for the calculations, are also described there. In the p

APA, Harvard, Vancouver, ISO, and other styles

10

Hoang, Hue, and Matilda Widerström. "Simulation of distributed windings using the insert technique." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-17430.

Full text

Abstract:

During the insert process when the windings of an electric motor are pushed into the stator slots, some detrimental phenomena can occur that affect the efficiency and life of the motor. To detect these phenomena and optimize the process, a simulation would be useful. An investigation of the possibility to perform a simulation, using an appropriate numerical method for the insert process of distributed windings in a permanent magnet synchronous motor, was performed. During the project, a literature study was carried out to investigate existing methods and key-parameters for the simulation of th

APA, Harvard, Vancouver, ISO, and other styles

11

Olsson, Adam, and Anders Rask. "Simulation of CamDrum for Shock Absorbers." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-263860.

Full text

Abstract:

Simulation can play an important role when aiming to streamline extensive and time-consuming tests. It has the potential to save time, money and energy. One of the testing methods used to test shock absorbers (SA), is accelerated life testing using a rolling road, CamDrum. It is therefore of great interest to examine the possibilities to streamline this testing method. This master thesis is conducted in co-operation with Öhlins Racing AB and the Machine Design department at KTH. The thesis project aims to look into the following: How can the use of simulation software aid in streamlining the t

APA, Harvard, Vancouver, ISO, and other styles

12

Danglade, Florence. "Traitement de maquettes numériques pour la préparation de modèles de simulation en conception de produits à l'aide de techniques d'intelligence artificielle." Thesis, Paris, ENSAM, 2015. http://www.theses.fr/2015ENAM0045/document.

Full text

Abstract:

Maitriser le triptyque coût-qualité-délai lors des différentes phases du Processus de Développement d’un Produit (PDP) dans un environnement de plus en plus concurrentiel est un enjeu majeur pour l’industrie. Le développement de nouvelles méthodes et de nouveaux outils pour adapter une représentation du produit à une activité du PDP est l’une des nombreuses pistes d’amélioration du processus et certainement l’une des plus prometteuses. Cela est particulièrement vrai dans le domaine du transfert de modèles de Conception Assistée par Ordinateur (CAO) vers des activités de simulations numériques.

APA, Harvard, Vancouver, ISO, and other styles

13

Koudela, Ondřej. "Návrh 3D tiskárny typu delta pi s temperovanou podložkou s využitím systémů CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221074.

Full text

Abstract:

This master's thesis deals with 3D printing using non-commercial 3D RepRap type printers. This work briefly describes development trends of non-commercial RepRap printers, theory of FDM print with analysis and comparison of materials, which are used in printing and the issue of the finite volume method and theory of heat diffusion. The practical part based on simulations from SolidWorks Flow Simulation discussed two basic methods of heating hot bed, then the temperature profile of hot end and the heat flow in full assembly of the printer. Outcome of this work is design an optimized model and t

APA, Harvard, Vancouver, ISO, and other styles

14

Stručovský, Aleš. "Analýza rozložení teplotního profilu v pájecí peci pomocí systémů CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220122.

Full text

Abstract:

The aim of this project is using the CAE system to analyze the distribution of the temperature profile brazing furnace DIMA 0180. To create the model is used SolidWorks Premium 2012. The simulation is performed using the Flow Simulation. This work builds on the knowledge diploma thesis by Martin Procházka titled The effect of different heat capacities and components on the longitudinal temperature profile for reflow soldering. We start from the knowledge of heat transfer, especially of heat conduction and radiation, which appear in the furnace.

APA, Harvard, Vancouver, ISO, and other styles

15

Brandt, Andreas. "Understand Your Design!" Universitätsbibliothek Chemnitz, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-114544.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Dahlström, Erika, and Mikael Johansson. "Riktlinjer för effektivisering av arbetet med Simuleringsdriven Konstruktion." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-25626.

Full text

Abstract:

Då många företag vill skaffa sig marknadsandelar genom att leverera rätt produkt, vid rätt tid och för rätt kostnad har de börjat arbeta med Simuleringsdriven Konstruktion. Simuleringsdriven Konstruktion hjälper dem att genom ett iterativt arbetssätt hitta optimal konstruktion tidigt i NPD-processen och därigenom reducera tid och kostnad för produktutvecklingen. Många företag som sysslar med forskning och utveckling kräver idag mer av provutrustning än tidigare för att kunna kontrollera och möta ökande krav på produkter. Mer sofistikerad provutrustning behöver utvecklas för att möta ökade kra

APA, Harvard, Vancouver, ISO, and other styles

17

Syal, Gagan [Verfasser]. "CAE - PROCESS AND NETWORK : A methodology for continuous product validation process based on network of various digital simulation methods [[Elektronische Ressource]] / Gagan Syal." Karlsruhe : KIT Scientific Publishing, 2014. http://www.ksp.kit.edu.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Andersson, Robin, and Robert Timalm. "Development and simulation of a safety bracket for a safety system." Thesis, Tekniska Högskolan, Jönköping University, JTH, Industriell produktutveckling, produktion och design, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-49324.

Full text

Abstract:

This thesis report aims to help the client developing their new product. The new product to be developed is a safety bracket for a safety system. The safety bracket connects different parts which create the safety system and it should be able to withstand impacts from moving objects. The client has a set of requirements that needs to be addressed during the product development process. One of the most important requirements that must be fulfilled is the given impact energy that the safety bracket must withstand. The methodology used during this thesis work is the product development processes

APA, Harvard, Vancouver, ISO, and other styles

19

Gulda, Jiří. "Řešení technologie při výrobě odlitku v malé strojírenské firmě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229485.

Full text

Abstract:

The dissertation work focuses on the design and optimization of the castings and foundry technology and the production a particular model for the casting. The technology proposal and the pattern set building in 3D using CAD system. The casting simulation in CAE MAGMAsoft® system and evaluation of the proposed casting technology. Production of the pattern using CAD/CAM software and CNC machine tools with a focus on 3-axis and 5-axis machining. The economic benefits for the company.

APA, Harvard, Vancouver, ISO, and other styles

20

Aquino, João José Redondo de. "Structural numerical simulation code development with isogeometric anakysis (IGA)." Master's thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/22375.

Full text

Abstract:

Mestrado em Engenharia Mecânica<br>In the present day most product development industries uses the Finite Element Method (FEM) for structural analysis. Designers model the product geometries using Computer-Aided Design (CAD) software, the geometries are then fitted for analysis, by the analysts, with a mesh approximation that inevitably results in loss of accuracy. Achieving the best geometry description for complex components can be a complex task and it can take a lot of time. Considering this drawback, a new method was developed which takes advantages of curve representation tools and uses

APA, Harvard, Vancouver, ISO, and other styles

21

Abramchuk, Vagner. "Estudo da força de arrasto sobre veículos de transporte de pessoas empregando CFD." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/96315.

Full text

Abstract:

Com o avanço tecnológico dos computadores e o desenvolvimento de programas de simulação de fluidos, propiciando resultados cada vez mais sofisticados e eficazes, ocorreu uma redução significativa no tempo e nos custos computacionais para conceber veículos mais seguros e com menos agressão ao meio ambiente, devido ao seu menor consumo de combustível. Contudo, mesmo com o uso da Dinâmica dos Fluidos Computacional bastante disseminado, ainda são divergentes as informações sobre o nível de concordância esperado entre os resultados obtidos, por meio da simulação, quando comparada com os resultados

APA, Harvard, Vancouver, ISO, and other styles

22

TANG, Yihao, and Hui ZHU. "Test method development by use of SOM-GRNN." Thesis, KTH, Fordonsdynamik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-243286.

Full text

Abstract:

The relationship between Objective Metrics (OM) and Subjective Assessments (SA) has been analyzed by people using different methods. This paper continues Gaspar Gil Gómez’s research over test method development by use of SOM-GRNN, aiming to find correlations between OM and SA. In this paper, CAE simulation is performed to analyze the relationship between OM and vehicle parameters. First impression test is refined and one more dataset has been added in order to populate SOM-GRNN map. This paper also conducts analysis over SOM and GRNN algorithms, and explores several possible applications using

APA, Harvard, Vancouver, ISO, and other styles

23

Grandicki, Andreas, and Mattias Lokgård. "Parametric CAD Modeling to aid Simulation-Driven Design : An evaluation and improvement of methods used at Scania." Thesis, Linköpings universitet, Maskinkonstruktion, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-138121.

Full text

Abstract:

This report documents a thesis conducted at Scania CV AB in Södertälje, Sweden. The main purpose of the thesis has been to examine and improve upon current practices of parametric CAD-modeling at Scania, with the ultimate goal of increased design automation and simulation-driven design. The thesis was initiated with a literature study, mainly covering the fields of parametric CAD-modeling, design automation and knowledge-based engineering. Furthermore, a questionnaire and multiple interviews were conducted to assess the awareness and mind-set of the employees. Finally, a case-study was carried

APA, Harvard, Vancouver, ISO, and other styles

24

Heine, Andreas. "Berechnung und Simulation von Kurvenschrittgetrieben." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-225959.

Full text

Abstract:

Bei CAD-Systemen mit integriertem MKS ist der Schritt zur Simulation von Kurvenschrittgetrieben vermeintlich kurz, da alle zugehörigen Bauteile inkl. der Massen und Trägheiten vorhanden sind, jedoch müssen Bewegungsprofile meist mit einer zusätzlichen Software gestaltet werden. Außerdem sind oft Änderungen an den Geometrien für ein lauffähiges Simulationsmodell notwendig und dynamische Aspekte können nur begrenzt abgebildet werden. Der Einsatz von Spezialsoftware wie MOCAD liefert schnell Ergebnisse und ermöglicht einfache Parametervariationen, wobei meist nur kinetostatische Analysekennwerte

APA, Harvard, Vancouver, ISO, and other styles

25

Johnson, Chad A. "The integration of CAD/CAM with virtual machining simulation and cost estimation." Ohio : Ohio University, 1997. http://www.ohiolink.edu/etd/view.cgi?ohiou1177434959.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Andrade, Gustavo Souza. "Uso de wavelets para a melhoria de desempenho de simulações numéricas usando carregamentos de pistas na indústria automotiva." Programa de Pós- Graduação em Mecatrônica da UFBA, 2009. http://www.repositorio.ufba.br/ri/handle/ri/11742.

Full text

Abstract:

93f.<br>Submitted by Suelen Reis (suziy.ellen@gmail.com) on 2013-04-10T19:28:26Z No. of bitstreams: 1 Dissertacao-Andrade2009.pdf: 2855290 bytes, checksum: 594e02d722d8945462d506683b9443b0 (MD5)<br>Approved for entry into archive by Rodrigo Meirelles(rodrigomei@ufba.br) on 2013-06-06T18:56:16Z (GMT) No. of bitstreams: 1 Dissertacao-Andrade2009.pdf: 2855290 bytes, checksum: 594e02d722d8945462d506683b9443b0 (MD5)<br>Made available in DSpace on 2013-06-06T18:56:16Z (GMT). No. of bitstreams: 1 Dissertacao-Andrade2009.pdf: 2855290 bytes, checksum: 594e02d722d8945462d506683b9443b0 (MD5) Previ

APA, Harvard, Vancouver, ISO, and other styles

27

Xu, Jianfei. "CAD-based integrated simulation environment, CAD-ISE." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ60359.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

CECCHETTI, FRANCESCO. "Tecnologie CAD-CAM e chirurgia implantare protesicamente guidata: analisi di una nuova sistematica." Doctoral thesis, Università degli Studi di Roma "Tor Vergata", 2008. http://hdl.handle.net/2108/512.

Full text

Abstract:

La Tomografia Assiale Computerizzata (TAC) e la Risonanza Magnetica Nucleare (RMN) sono le modalità adottate in medicina per ottenere immagini relative a sezioni del corpo umano. Nell’ultimo decennio la TAC è diventata lo strumento più diffuso per la valutazione della struttura ossea su cui effettuare il posizionamento di impianti dentali ). A tale scopo sono stati realizzati strumenti software che consentono un’elaborazione delle immagini ottenute con la TAC al fine di ottenere una diagnosi pre-operatoria corretta e una pianificazione dell’installazione dell’impianto . In lavori precedenti è

APA, Harvard, Vancouver, ISO, and other styles

29

Zehe, Daniel [Verfasser], Alois [Akademischer Betreuer] Knoll, Wentong [Gutachter] Cai, and Alois [Gutachter] Knoll. "Cloud Simulation for Large-Scale Agent-Based Traffic Simulations / Daniel Zehe ; Gutachter: Wentong Cai, Alois Knoll ; Betreuer: Alois Knoll." München : Universitätsbibliothek der TU München, 2019. http://d-nb.info/119189715X/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

O'Leary, John Joseph. "CROBOTS, a cad-based robot simulation tool." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0014/MQ36159.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Olsson, Niklas. "Simulation of PT100 sensor controllable via CAN." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69904.

Full text

Abstract:

Modern day vehicles is full of electronics, different sensors and software. To test that all these different systems works as expected it is suitable to build test beds. These test beds consists of, as far as possible, real components that should be implemented in the vehicles. A vehicle has various temperature sensors. Something that is important totest is how the vehicles systems reacts to different temperatures. This thesis aim is to construct a unit that can simulate a temperature sensor of type PT100. The unit should be able to be controlled via CAN and it should also be able to simulate

APA, Harvard, Vancouver, ISO, and other styles

32

Davies, David Lloyd. "Design and simulation of shaped can products." Thesis, Swansea University, 2004. https://cronfa.swan.ac.uk/Record/cronfa43066.

Full text

Abstract:

The drawn and wall ironing process (DWI), the primary method in making beverage cans, is a precise procedure where a large number of parameters influence the resultant can shape and performance. With the goal o f expanding the capability of production or optimising its efficiency a finite element (FE) model is set-up parametrically such that once validated, new designs can be investigated via this model. The introduction of factorial analysis is utilised in conjunction with FE in order to optimise some variables whilst simultaneously gaining a rounded understanding as to their effect. The thes

APA, Harvard, Vancouver, ISO, and other styles

33

Choi, Young Gu. "An integrated computer simulation system to evaluate surface integrity in end milling /." free to MU campus, to others for purchase, 1996. http://wwwlib.umi.com/cr/mo/fullcit?p9717175.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Mather, Kevin R. "A CAD-based simulation modeling methodology for construction." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0004/MQ28964.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Häll, Lars O. "Developing educational computer-assisted simulations : Exploring a new approach to researching learning in collaborative health care simulation contexts." Doctoral thesis, Umeå universitet, Pedagogiska institutionen, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-64296.

Full text

Abstract:

Health care education is developing and simulations, in different guises, are gaining increasing attention as a means of overcoming tensions between instructional models and educational objectives. The role of simulations is, however, yet to be fully defined and will be dependent on the actual impact simulations on educational practice. Research need to better understand this impact and contribute to developing simulation practices. There is, therefore, a strong need for research that can balance scientific stringency and practical utility. This presents a challenge in a field that is biased i

APA, Harvard, Vancouver, ISO, and other styles

36

Stavrou, Andreas. "Analysis and simulation of faults in squirrel cage motors." Thesis, University of Aberdeen, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390266.

Full text

Abstract:

Condition based maintenance of electrical machines offers significant advantages for industry. A large part of the research effort in this area is directed towards the evaluation of fault conditions. This thesis is concerned with analysing and modelling faults in induction motors. A method for evaluating the performance of induction machines with static and dynamic eccentricity is developed, using harmonic analysis of the air gap permeance. Models able to simulate eccentricity are presented. The slip ring model equations are obtained and then used to obtain the commutator models transformed to

APA, Harvard, Vancouver, ISO, and other styles

37

Stainton, Andrew. "To what extent can total enterprise simulation be validated?" Thesis, University of Southampton, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.438665.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Jonsson, Hanna, and Emmy Sjöström. "Optimization of the Cab Production Sequence : A simulation-based study at Volvo Group Trucks' cab plant in Umeå." Thesis, Umeå universitet, Institutionen för matematik och matematisk statistik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-123343.

Full text

Abstract:

Volvo Group’s cab plant in Umeå produces cab bodies and consists of three operating areas; the Stamping and parts production, the Body in White and the Paint shop. Today the plant produces around XXX cabs/week, but the goal is to reach the invested capacity of XXX cabs/week. In order to increase the production capacity, the efficiency of both the manual and the automated processes need to be improved. Unlike the manual processes in where the capacity can be increased by enlarged workforce, the automated processes need to be optimized. Today the cabs are produced in the same order as the orders

APA, Harvard, Vancouver, ISO, and other styles

39

Shi, Kaijian. "A multi-mode hierarchical simulation approach to GaAs circuit CAD." Thesis, University of Kent, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358120.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Tasci, Emre. "Generation And Simulations Of Nanostructures Of Cage Structures." Phd thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/12608619/index.pdf.

Full text

Abstract:

This thesis proposes algorithms to construct various nanosystems such as nanotori, nanogear and nanojunctions based on graphite type structures, exploiting the observed pentagonal and heptagonal defects. These produced systems are then simulated to test for their thermal stability and for their electronic properties. A brief review of the methods used is also included.

APA, Harvard, Vancouver, ISO, and other styles

41

Höfling, Martin. "Simulations and Experiments: How close can we get?" Diss., lmu, 2011. http://nbn-resolving.de/urn:nbn:de:bvb:19-137740.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Sadler, Jonathan Edwin. "Frameworks for Part Generation in Multiple CAD Systems and for CAD Simulation with Multiple Users." BYU ScholarsArchive, 2020. https://scholarsarchive.byu.edu/etd/8755.

Full text

Abstract:

Companies often require designers to work with and operate between different computer-aided design (CAD) systems. To interoperate between these systems, a neutral design standard for CAD models is needed that allows for generation, customization, and parameterization. Current standards often fail to incorporate file history and design intent. The research proposes a simplified, neutral design format that can be used to generate models in different CAD systems. The format proposes additional functionality not yet found in existing neutral formats or scripts. The system was tested by generati

APA, Harvard, Vancouver, ISO, and other styles

43

Lanka, Somanath. "Object-oriented real time simulation for a manufacturing facility." Ohio : Ohio University, 1994. http://www.ohiolink.edu/etd/view.cgi?ohiou1178130985.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Riedel, Mathias. "CAD orientierte Teach-In Simulation und Bewegungsoptimierung für beliebige Roboterbaureihen." Universitätsbibliothek Chemnitz, 2009. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-200900856.

Full text

Abstract:

Der Vortrag beschäftigt sich mit der Simulation von Handhabungs- Montage- und Fertigungsaufgaben mit Hilfe von einem bzw. mehreren miteinander zusammenarbeitender Industrieroboter. Es werden Möglichkeiten aufgezeigt, wie die Herangehensweise für den Aufbau einer solchen Simulation ist. Weiterhin wird auf das Thema der Glättung von Unstetigkeiten nach verschiedenen Verfahren und deren Auswirkung auf die Bahntrajektorie eingegangen.

APA, Harvard, Vancouver, ISO, and other styles

45

Viklander, Johan. "Simulation of a TCU Node on a Virtual CAN Bus." Thesis, Umeå universitet, Institutionen för fysik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-119477.

Full text

Abstract:

Electrical Control Units (ECUs) communicating on Controller Area Networks (CAN buses) are widely used in vehicle electrical systems. Being able to simulate these circuits and buses in a computer environment is beneficial during the development phase when access to test benches is limited and expensive. Simulations can also give a very detailed view of the entire system which in an ordinary lab setup would be practically impossible. BAE Systems Örnsköldsvik SIL Lab department works in the simulation environment CANoe supplied by Vector Informatik GmbH. BAE Systems have a simulation model of th

APA, Harvard, Vancouver, ISO, and other styles

46

Szarvasy, Ivo. "Automatic CAD model based simulation of PVC extrusion and calibration." Thesis, Swansea University, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.577549.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Cai, Xiaohui [Verfasser]. "Simulation des Auslaufrollgangs beim Warmwalzen von DP-Stählen / Xiaohui Cai." Aachen : Shaker, 2009. http://d-nb.info/1161309454/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Eriksson, Gustav, and Anton Engberg. "Automating the CAD to Virtual Reality Pipeline for Assembly Simulation." Thesis, Linköpings universitet, Maskinkonstruktion, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-166894.

Full text

Abstract:

Virtual reality is emerging as a valuable tool in the manufacturing industry, as it allows engineers to place themselves in a virtual environment in which they can inspect and evaluate their 3D designs, providing a sense of scale not available through a 2D screen. Siemens Industrial Turbomachinery AB currently uses physical prototypes to assess whether their designs work from an assembly perspective, which can be expensive and time consuming to make and are often downscaled. Therefore, an interest in exploring the possibility of using virtual reality as a tool for simulating and evaluating ass

APA, Harvard, Vancouver, ISO, and other styles

49

Smith, Kenneth S. "CAD simulation of drive converters on isolated marine power systems." Thesis, University of Aberdeen, 1992. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU040411.

Full text

Abstract:

Power electronic converters are being increasingly used on isolated marine power systems, to provide variable speed control of electric motors. As the rating of these drive converters increases, the converter load becomes a significant part of the total system load. Traditional methods for calculating the performance characristics, which assume the presence of an infinite busbar on the system, are not appropriate for such systems. The intercoupling which exists between system components such as synchronous generators, converters, and the drive motor must be included in the calculation. In this

APA, Harvard, Vancouver, ISO, and other styles

50

Wikström, Jonas. "3D Model of Fuel Tank for System Simulation : A methodology for combining CAD models with simulation tools." Thesis, Linköpings universitet, Maskinkonstruktion, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-71370.

Full text

Abstract:

Engineering aircraft systems is a complex task. Therefore models and computer simulations are needed to test functions and behaviors of non existing systems, reduce testing time and cost, reduce the risk involved and to detect problems early which reduce the amount of implementation errors. At the section Vehicle Simulation and Thermal Analysis at Saab Aeronautics in Linköping every basic aircraft system is designed and simulated, for example the fuel system. Currently 2-dimensional rectangular blocks are used in the simulation model to represent the fuel tanks. However, this is too simplistic

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!