Log in

Relevant bibliographies by topics / Calculation of energy / Journal articles

To see the other types of publications on this topic, follow the link: Calculation of energy.

Journal articles on the topic 'Calculation of energy'

Author: Grafiati

Published: 4 June 2021

Last updated: 30 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Calculation of energy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Podgornovs, Andrejs, and Antons Sipovichs. "Electromechanical Battery EMB Mass Minimization taking into Account its Electrical Machines Rotor Energy." Electrical, Control and Communication Engineering 7, no. 1 (2014): 5–10. http://dx.doi.org/10.1515/ecce-2014-0017.

Full text

Abstract:

Abstract In this paper the electromechanical battery (EMB) with synchronous machine is described. Theoretically, if electrical machines rotor stored energy is known, it is possible to reduce the flywheel mass of electromechanical battery. For example, the efficiency of energy recovery (kilowatt-hours out versus kilowatthours in) in nowadays appliances exceeds 95 % which is considerably better than of any electrochemical battery, such as lead-acid battery. For the rotor stored energy amount calculation, it is necessary to find all geometrical dimensions of the electrical machine. To achieve thi

APA, Harvard, Vancouver, ISO, and other styles

2

Serguntsov, Alexander, and Leonid Alekseenko. "Optimization of MFA parameters for harrowing crops with simultaneous fertilization." MATEC Web of Conferences 346 (2021): 03004. http://dx.doi.org/10.1051/matecconf/202134603004.

Full text

Abstract:

The calculation of the energy intensity of the harrowing process of winter crops with simultaneous fertilization is theoretically justified by drawing up a flowchart with a step-by-step calculation of the parameters and operating modes of a multifunctional unit. The flowchart shows the parameters and operating modes that are set and that need to be calculated to achieve the goal of calculating energy intensity. In the course of calculations, we constructed the dependence of energy consumption on the operating speed, that is, we determined the minimum energy consumption at maximum power when us

APA, Harvard, Vancouver, ISO, and other styles

3

Faizullin, R. O., V. Y. Zakharova, and A. V. Baranenko. "Numerical simulation of processes in the latent-heat thermal energy storage tank." IOP Conference Series: Earth and Environmental Science 866, no. 1 (2021): 012036. http://dx.doi.org/10.1088/1755-1315/866/1/012036.

Full text

Abstract:

Abstract This paper has proposed a computer model for numerical calculations of heat flows in regular rhombic packed bed of capsules with phase change material. The mathematical model of heat transfer in a capsule is based on finding a zero-dimensional solution to the Stefan problem, considering the influence of convective flows arising in the liquid phase. To take into account the heat transfer due to the convective component in the liquid phase in the capsule, the effective thermal conductivity coefficient is calculated. An experimental dependence has been applied to describe the heat exchan

APA, Harvard, Vancouver, ISO, and other styles

4

Pingak, Redi Kristian, Rosara Kolmate, and Bernandus Bernandus. "A Simple Matrix Approach to Determination of the Helium Atom Energies." Jurnal Penelitian Fisika dan Aplikasinya (JPFA) 9, no. 1 (2019): 10. http://dx.doi.org/10.26740/jpfa.v9n1.p10-21.

Full text

Abstract:

Calculation of He atomic energy levels using the first order perturbation theory taught in the Basic Quantum Mechanics course has led to relatively large errors. To improve its accuracy, several methods have been developed but most of them are too complicated to be understood by undergraduate students. The purposes of this study are to apply a simple matrix method in calculating some of the lowest energy levels of He atom (1s2, triplet 1s2s, and singlet 1s2s states) and to reduce errors obtained from calculations using the standard perturbation theory. The convergence of solutions as a functio

APA, Harvard, Vancouver, ISO, and other styles

5

Nikolic, M. R., and Aleksandar Tancic. "Elastic scattering of low-energy positron by atom." Facta universitatis - series: Physics, Chemistry and Technology 3, no. 2 (2005): 141–49. http://dx.doi.org/10.2298/fupct0502141n.

Full text

Abstract:

In this paper, we present our calculation for the elastic scattering of the slow positron from atoms. The calculation is performed for He, Ne, Xe and Kr. In the calculations we used Random phase approximation. By slowing Dyson equation we take into account the correlation effects. Our results are consistent with experimental and other theoretical results.

APA, Harvard, Vancouver, ISO, and other styles

6

Kuznetcov, A., M. Kalugin, D. Oleynik, and D. Shkarovsky. "INTRODUCTION ENERGY DEPOSITION OF DELAYED GAMMAS USING KERMA FACTORS IN MCU-PTR." PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY. SERIES: NUCLEAR AND REACTOR CONSTANTS 2019, no. 4 (2019): 128–33. http://dx.doi.org/10.55176/2414-1038-2019-4-128-133.

Full text

Abstract:

The paper describes the realization of upgrade precision Monte Carlo program MCU-PTR for introduction energy deposition of delayed gammas in energy release calculations. For this, based on the next position approximations are applied: after some time of reactor operation delayed gammas spectrum reaches asymptotic behavior and then does not change. This modification allows to take into account both promptly and delayed photons in spectrum of generation photons in neutron-photon task. The application of this approach was verified by calculating the task 2b of the VERA benchmark and by comparing

APA, Harvard, Vancouver, ISO, and other styles

7

Kuznetsov, Oleg, Viktor Chepurnov, Albina Gurskaya, Mikhail Dolgopolov, and Sali Radzhapov. "C-beta energy converter efficiency modeling." EPJ Web of Conferences 222 (2019): 02012. http://dx.doi.org/10.1051/epjconf/201922202012.

Full text

Abstract:

To construct beta converters with maximum efficiency it is necessary to carry out the theoretical calculation in order to determine their optimal parameters - the geometry of the structure, the thickness of the deposition of the radioisotope layer, the depth and the width of the p-n junction, and others. To date, many different theoretical models and calculations methods had been proposed. There are fairly simple theoretical models based on the Bethe-Bloch formula and the calculation of the rate of generation of electron-hole pairs, and on calculations by equivalent circuits. Also, the Monte-C

APA, Harvard, Vancouver, ISO, and other styles

8

Chernyaev, Aleksey, Maria Kornyushina, and Vladimir Chudin. "Technological modes of mold punching-calibrating with local heating." Science intensive technologies in mechanical engineering 2022, no. 4 (2022): 13–17. http://dx.doi.org/10.30987/2223-4608-2022-4-13-17.

Full text

Abstract:

The basic relations for calculating the modes of mold punching a cylindrical hollow billet under viscoplastic conditions are given. The energy calculation method is used in relation to the axisymmetric field of displacement velocities. Theoretical calculations of the work material processing pressure and damage rate are performed.

APA, Harvard, Vancouver, ISO, and other styles

9

Tamm, Meril, Joana Ortiz, Jordi Pascual, Jarek Kurnitski, Martin Thalfeldt, and Jaume Salom. "Primary Energy Balance driven Integrated Energy Design Process of Positive Energy Building." E3S Web of Conferences 246 (2021): 13001. http://dx.doi.org/10.1051/e3sconf/202124613001.

Full text

Abstract:

The ISO 52000–1:2017 is the overarching Energy Performance of Buildings (EPB) standard, providing the general framework of the EPB assessment. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. ISO 52000–1 provides general profound guidelines, but also gives the freedom to adapt the guidelines with national standards and regulations. This article focuses on design stage energy performance assessment in the framework of syn.ikia project, which

APA, Harvard, Vancouver, ISO, and other styles

10

Özger, Mehmet, Abdüsselam Altunkaynak, and Zekai Şen. "Stochastic wave energy calculation formulation." Renewable Energy 29, no. 10 (2004): 1747–56. http://dx.doi.org/10.1016/j.renene.2004.01.009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Şen, Zekai. "Stochastic wind energy calculation formulation." Journal of Wind Engineering and Industrial Aerodynamics 84, no. 2 (2000): 227–34. http://dx.doi.org/10.1016/s0167-6105(99)00105-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Harima, Hisatomo, Akira Yanase, and Akira Hasegawa. "Energy Band Calculation of LaCu6." Physica B: Condensed Matter 165-166 (August 1990): 341–42. http://dx.doi.org/10.1016/s0921-4526(90)81020-o.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Brandi, Luigi S. "Calculation of Resting Energy Expenditure." Critical Care Medicine 13, no. 7 (1985): 611. http://dx.doi.org/10.1097/00003246-198507000-00027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Provorova, T. P. "Hydraulic calculation of energy dissipators." Hydrotechnical Construction 29, no. 10 (1995): 562–69. http://dx.doi.org/10.1007/bf02443044.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Han, Seungho, Geunjun Lyu, Yeonjae Lee, Hiesik Kim, and Gyoutae Park. "Design and Implementation of Concentration Calculation Algorithm for the Infrared Combustible Gas Detector." Journal of Energy Engineering 25, no. 1 (2016): 145–52. http://dx.doi.org/10.5855/energy.2015.25.1.145.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Antoš, Jan. "Energy saving in rail transport." Acta Polytechnica CTU Proceedings 31 (July 14, 2021): 1–4. http://dx.doi.org/10.14311/app.2021.31.0001.

Full text

Abstract:

Aim of this article is to introduce and present advantages and possibilities of using simulation tools to calculate energy flows of tractive vehicle in all phases of its ride. The focus is on the braking phase, especially on the braking energy recuperation that offers the highest energy saving potential.Energetic simulation was carried out as a part of a current railway reconstruction study, which is a good example of possible energetic calculation use. Energetic calculation in the simulation are performed using so called "exact method" developed at the Faculty of Transportation. The advantage

APA, Harvard, Vancouver, ISO, and other styles

17

Moser, Simon, Klemens Leutgöb, Johannes Reichl, and Andrea Kollmann. "Making the results of bottom-up energy savings comparable." Thermal Science 16, no. 3 (2012): 687–702. http://dx.doi.org/10.2298/tsci120106119m.

Full text

Abstract:

The Energy Service Directive (ESD) has pushed forward the issue of energy savings calculations without clarifying the methodological basis. Savings achieved in the Member States are calculated with rather non-transparent and hardly comparable Bottom-up (BU) methods. This paper develops the idea of parallel evaluation tracks separating the Member States? issue of ESD verification and comparable savings calculations. Comparability is ensured by developing a standardised BU calculation kernel for different energy efficiency improvement (EEI) actions which simultaneously depicts the different calc

APA, Harvard, Vancouver, ISO, and other styles

18

Sinđić Grebović, Radmila, Tatyana Spiridonova, and Maria Vrublevskaya. "Definition of Climatic Parameters for Calculation of Energy Performance of Buildings." Applied Mechanics and Materials 725-726 (January 2015): 1537–43. http://dx.doi.org/10.4028/www.scientific.net/amm.725-726.1537.

Full text

Abstract:

Calculation of energy performance of buildings is defined by European standards in accordance with the Directive 2010/31/EU (EPBD). One of the main goals of the Directive 2010/31/EU is the decrease of energy consumption in the buildings. Standard EN ISO 13790 prescribes the methodology of calculations of energy performance of buildings. The input data for the calculation and their interpretation are defined by European standards related to EN ISO 13790. Climate parameters are defined based on meteorological data in accordance with EN ISO 15927-4. Numerous analyses have shown that the results o

APA, Harvard, Vancouver, ISO, and other styles

19

R. B, Bahdanovich, Pázmán K., and Tikhomirov G. V. "CALCULATION OF NEUTRON-CAPTURE REACTIONS CONTRIBUTION TO ENERGY RELEASE IN VVER-1000 USING SERPENT CODE." KnE Engineering 3, no. 3 (2018): 473. http://dx.doi.org/10.18502/keg.v3i3.1648.

Full text

Abstract:

Calculating the energy release in fuel elements is an important aspect of the modeling and design of nuclear reactors. Most of the energy is produced by fission, but a non-negligible percentage is coming from neutron capture reactions, such as (n, γ) or (n, α). We implement a previously developed method for the calculation of effective energy release using Serpent Monte Carlo code. We investigate the percentage of capture component in effective energy release for various models of VVER-1000 fuel: firstly, an equivalent cell, then fresh fuel assemblies of different compositions, differing in fu

APA, Harvard, Vancouver, ISO, and other styles

20

Novikov, Sergey, Boris Zhadanovsky, and Sergey Sinenko. "Guidelines on calculation of the concrete thermal treatment modes." MATEC Web of Conferences 178 (2018): 09007. http://dx.doi.org/10.1051/matecconf/201817809007.

Full text

Abstract:

The article provides guidelines on calculation of the cast-inplace reinforced concrete thermal treatment modes: the problem of thermal treatment mode by setting the mathematical temperature field model in the hardening concrete has been solved; model equation which allows calculating the temperature field in the hardening concrete structure using computer software has been solved. These data allow to achieve the high quality of concrete at minimum heat treatment duration and the maximum reduction of energy costs, while minimizing experimental calculations.

APA, Harvard, Vancouver, ISO, and other styles

21

Lee-Dadswell, G. R., and C. G. Gray. "Semiclassical variational calculation of energy levels of He@C70." Canadian Journal of Physics 84, no. 2 (2006): 145–64. http://dx.doi.org/10.1139/p06-039.

Full text

Abstract:

Semiclassical variational methods are used to obtain estimates of the quantum mechanical energy levels for two simplified models of the potential seen by a helium atom trapped inside a C70 cage. We find that with the use of a simple trial solution, the calculations are simple. A more complicated trial trajectory, while improving some results of the calculation, makes the calculation prohibitively difficult. We also observe that as long as the precessional frequency of the orbits is small we can obtain very high accuracy in our results. However, the inability to accurately predict precessional

APA, Harvard, Vancouver, ISO, and other styles

22

MAHDAVI, M., and T. KOOHROKHI. "ENERGY LEAKAGE PROBABILITY EFFECT ON IGNITION CONDITION IN AN INERTIAL CONFINEMENT FUSION PLASMA." International Journal of Modern Physics B 25, no. 27 (2011): 3611–22. http://dx.doi.org/10.1142/s0217979211101983.

Full text

Abstract:

For a weak to moderately coupled plasma, the charged particle stopping power dE/dx was recently calculated from first principles in Ref. 1 using the method of dimensional continuation.2 While the calculational techniques were imported from quantum field theory, the calculation itself lies squarely within the standard framework of convergent kinetic equations. By using these calculations, ignition condition regime in (D/Tx/3Hey) fusion fuel pellet is investigated, including energy deposition fraction of charged particles and neutrons in fuel pellet, bremsstrahlung and inverse bremsstrahlung rad

APA, Harvard, Vancouver, ISO, and other styles

23

Wang, Xi Yuan, and Yuan Liu. "Comparative Research on Energy-Saving Performance of New Energy Vehicles." Applied Mechanics and Materials 602-605 (August 2014): 214–19. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.214.

Full text

Abstract:

The paper introduces the meaning of “energy-saving and emission reduction” in new energy vehicles, analyzes the basic forms of new energy vehicles, proposes two-step method for calculating energy-saving performance, and establishes energy consumption calculation formulas through comparative analysis on overall energy consumption and emission during the whole life between several types of pure electric vehicles and conventional vehicles. The paper provides theoretical support for rational development of energy-saving new energy automotive industry.

APA, Harvard, Vancouver, ISO, and other styles

24

Malyavina, Elena, Olga Malikova, and Luong Van Pham. "Influence of detailing the climate model on the calculation of energy consumption." E3S Web of Conferences 164 (2020): 02008. http://dx.doi.org/10.1051/e3sconf/202016402008.

Full text

Abstract:

The repeatability of outdoor air temperature and enthalpy combinations in a construction area is a necessary initial information for calculating the energy consumption of air conditioning systems. The most convenient form of presenting climatic data in such calculations is the probabilistic-statistical model, which constitutes a Table, the cells of which show the probabilistic repeatability of the outdoor air temperature and relative humidity. The parameter values given on the vertical and horizontal scales, that form the cell boundaries, can be taken with larger or smaller increments. The pap

APA, Harvard, Vancouver, ISO, and other styles

25

Kotov, B. I. "Modeling and calculation power saving modes grain drying materials under energy fields." Naukovij žurnal «Tehnìka ta energetika» 11, no. 1 (2020): 87–93. http://dx.doi.org/10.31548/machenergy2020.01.087.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Hryshchenko, V. O. "Modeling and calculation power saving modes grain drying materials under energy fields." Naukovij žurnal «Tehnìka ta energetika» 11, no. 3 (2020): 23–29. http://dx.doi.org/10.31548/machenergy2020.03.023.

Full text

Abstract:

Storing grain quality materials in post harvest handling and storage is largely dependent on correctly implemented the drying process. In agricultural production mainly use costly convection dryer. The main share of wasteful energy consumption accounts for heat drying agent, some heat is lost to the environment through the working surface of the dryers and spent coolant. Ways to reduce these energy costs is to reduce the amount of drying agent in the process to the level necessary to absorb and remove moisture from the dryer and the working volume of the principles of targeted "delivery" of en

APA, Harvard, Vancouver, ISO, and other styles

27

Liu, Yue Xian, and Nan Zhe Zhang. "The Calculating Benchmark Selection and its Skills in Chemical Engineering Calculation." Advanced Materials Research 1033-1034 (October 2014): 501–4. http://dx.doi.org/10.4028/www.scientific.net/amr.1033-1034.501.

Full text

Abstract:

Chemical engineering calculation is the base of chemical engineering science, the material balance and the energy balance are the most basic and important contents in chemical engineering calculation. The diversification and the importance of calculating benchmark in chemical engineering calculation were explained by an example about the material balance; the basic principles, some specific methods and skills for the calculating benchmark selection were pointed out. In short, the proper selection of calculating benchmark in chemical engineering calculation can not only simplify the calculation

APA, Harvard, Vancouver, ISO, and other styles

28

Moiseev, Nikolaj N., Evgenij M. Kruglov, and Andrej V. Didyk. "Photoneutron sources spectra calculation." Izmeritel`naya Tekhnika, no. 7 (2021): 54–59. http://dx.doi.org/10.32446/0368-1025it.2021-7-54-59.

Full text

Abstract:

The issues of increasing the accuracy of determining the average energy and the type of energy distribution (shape of the spectrum) of neutrons from Sb-Be- and Ra-Be-sources are considered. The indicated photoneutron sources are used to calibrate the energy scales of neutron spectrometers and to determine the energy dependence of the sensitivity of radiometers and neutron dosimeters. A method is proposed for calculating the energy spectra of radionuclide neutron sources of the Sb-Be (γ, n) and Ra-Be (γ, n) types, and the calculation results are presented. The dependence of the spectrum of the

APA, Harvard, Vancouver, ISO, and other styles

29

Zeggar, Foudil, Amrane Halilou, Brahim Meftah, Mohamed Mokeddem, Fathi Letaim, and Anis Bousbia-Salah. "Fuel depletion calculation in MTR-LEU NUR reactor." Nuclear Technology and Radiation Protection 23, no. 1 (2008): 11–18. http://dx.doi.org/10.2298/ntrp0801011z.

Full text

Abstract:

In this article, we present the results of a few energy groups calculations for the NUR reactor fuel depletion analysis up to 45 000 MWd/tU taken as the maximum fuel burn up. The WIMSD-4 cell code has been employed as a calculation tool. In this study, we are interested in actinides such as the uranium and plutonium isotopes, as well as fission products Xe-135, Sm-149, Sm-151, Eu-155, and Gd-157. Calculation results regarding the five energy groups are in a good agreement with those obtained with only two energy groups which can, therefore, be used in all subsequent calculations. Calculation r

APA, Harvard, Vancouver, ISO, and other styles

30

Artemov, V., A. Kuznetsov, K. Kurakin, and A. Tikhomirov. "IMPACT ASSESSMENT OF COOLANT DENSITY VARIATION ON THE ACCURACY OF VVER ENERGY RELEASE CALCULATION." PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY. SERIES: NUCLEAR AND REACTOR CONSTANTS 2019, no. 3 (2019): 80–88. http://dx.doi.org/10.55176/2414-1038-2019-3-80-88.

Full text

Abstract:

This paper presents the verification results of SAPFIR_95&RC_micro program that is intended for fine-grid three-dimensional pin-by-pin calculation of power in VVER reactor core at change of coolant density. In this paper, fine-grid three-dimensional pin-by-pin power calculation is typically seen as calculation where pin-by-pin power is computed on the finite-difference grid that matches the fuel rod spac-ing in fuel assembly. MCNP-based calculation was used as a benchmark; this calculation was prepared for one of the first fuel loadings of the NPP-2006 reactor. A series of two-dimensional

APA, Harvard, Vancouver, ISO, and other styles

31

Palladino, Domenico, Carmen Lavinia, Francesca Margiotta, and Francesca Pagliaro. "A methodological approach for energy demand assessment: theoretical analysis on solar thermal collector energy contribution." E3S Web of Conferences 312 (2021): 02002. http://dx.doi.org/10.1051/e3sconf/202131202002.

Full text

Abstract:

Solar thermal collector system is a widely used solution involving renewable energy source to cover the energy demand for domestic hot water production. At Italian level, the UNI TS 11300 provides a calculation methodology based on two approaches: the asset rating, which is easy to be applied but provides approximated results, and the tailored rating, which is more reliable but requires several detailed information. In this context, the present work proposes a new methodological approach to develop a simplified calculation method in order to obtain accurate energy performance results with no-a

APA, Harvard, Vancouver, ISO, and other styles

32

Palladino, Domenico, Flavio Scrucca, Nicolandrea Calabrese, Grazia Barberio, and Carlo Ingrao. "Durum-Wheat Straw Bales for Thermal Insulation of Buildings: Findings from a Comparative Energy Analysis of a Set of Wall-Composition Samples on the Building Scale." Energies 14, no. 17 (2021): 5508. http://dx.doi.org/10.3390/en14175508.

Full text

Abstract:

The urgent need to make buildings more performant in energy and environmental terms has led to the increasing study of recycled and natural materials as viable solutions. In this context, the present study aims at comparing the energy performance of innovative wall-sample solutions (with recycled polyethylene-terephthalate panels or durum-wheat straw bales) with a basic one. Energy evaluations were performed in Piazza Armerina (a city of Sicily–Italy), where the chosen material is widespread, by applying two calculation methods: a monthly average-energy-calculation approach, mandatory by Itali

APA, Harvard, Vancouver, ISO, and other styles

33

Zhang, Zhong Guo, Bin Gao, and Zhao Hui Liu. "The Energy Absorption of Structural Target with Stiffeners Impacted by Projectile." Applied Mechanics and Materials 44-47 (December 2010): 367–71. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.367.

Full text

Abstract:

Under penetrating condition, the plastic deformation of structural target is divided into local deformation region and global deformation region in this paper, calculate the energy absorbed by two deformations respectively and present a calculation method of energy absorption of structural target with stiffeners. Good agreement between the results of predicting the residual velocity of projectile by calculating the energy absorbed of structural target and results of numerical calculation illustrates that this method is reasonable.

APA, Harvard, Vancouver, ISO, and other styles

34

Gendelis, Staņislavs, Mikus Miķelsons, Andris Jakovičs, and Edgars Bredovskis. "Calculation of cost-optimal combination of building materials and technical systems for nZEB single-family house using global cost calculation method." MATEC Web of Conferences 282 (2019): 02070. http://dx.doi.org/10.1051/matecconf/201928202070.

Full text

Abstract:

As a rule, during the design stage of a single-family house, only initial costs are taken into account and optimised. Long-term financial calculations are usually not even made. At the same time, total costs to design, build and operate the building show a real difference in expenses while living in this house. In the case of nearly zero energy buildings (nZEBs), this global cost approach becomes especially useful because of the strict requirements of heating and primary energy, as well as the compulsory use of renewable energy sources, requiring more detailed and comprehensive calculations of

APA, Harvard, Vancouver, ISO, and other styles

35

Elhak Salhi, Dhia, and Haikel Jelassi. "Energy Levels and Lifetimes of 1s2 and 1snl (n=2-5) for Neutral Helium." Oriental Journal of Physical Sciences 2, no. 2 (2017): 52–56. http://dx.doi.org/10.13005/ojps02.02.01.

Full text

Abstract:

In this paper, we present calculations for some of the lowest energy levels and lifetimes for neutral helium. The FAC (Flexible-Atomic-Code) is a reliable code for calculating 49 energy levels and their lifetimes. The calculation is performed up to n=5 including a series of configuration of 1s2 and 1snl. Comparison has been made with similar data published in the NIST database. A good agreement of less than1% was found for most levels expect the 1s2p 3P2 level. This proves the reliability of our results. New values for lifetimes are presented for the first time.

APA, Harvard, Vancouver, ISO, and other styles

36

CHERNOSVITOV, Mikhail D. "ENERGY EFFICIENCY OF INTEGRATED MANAGEMENT OF WORK BOOSTER PUMP." Urban construction and architecture 3, no. 4S (2013): 96–99. http://dx.doi.org/10.17673/vestnik.2013.s4.26.

Full text

Abstract:

The theoretical calculations, the raw data, graphs, calculation results and conclusions to reduce energy consumption by using integral control of the existing booster pump station versus unregulated work and that the stabilization of the output pressure of the pump station.

APA, Harvard, Vancouver, ISO, and other styles

37

Konoplev, N. G., and G. E. Korobkov. "Liquid Energy Reduction with Centrifugal Rotating Motion." IOP Conference Series: Earth and Environmental Science 988, no. 3 (2022): 032093. http://dx.doi.org/10.1088/1755-1315/988/3/032093.

Full text

Abstract:

Abstract This article provides equation for calculating the pressure loss for a fluid and energy for a rolling ball moving in a logarithmic spiral from the action of inertial forces. Classical formulas give incorrect results when calculating coils with a changing twist radius. The calculation of the parameters of the fluid flow in the spiral bend and in the blades of the centrifugal impeller can now be determined only by numerical methods of calculation and, as such, formulas reflecting the energy losses associated with inertial forces do not yet exist. Based on the results of experimental and

APA, Harvard, Vancouver, ISO, and other styles

38

DEMIANCHUK, O., and A. BABARYKINA. "ENERGY EFFICIENT SOLUTIONS IN INFRASTRUCTURE PROJECTS OF SORTING COMPLEXES OF RAILWAY STATIONS." Transport systems and transportation technologies, no. 22 (December 28, 2021): 13. http://dx.doi.org/10.15802/tstt2021/247878.

Full text

Abstract:

Purpose. Improving approaches and methods of calculation and design of energy-efficient sorting slides of railway stations, taking into account the mechanization of their braking positions based on the use of modern car moderators, including energy efficient structures. Methodology. The research was performed using the methods of the theory of bitter calculations in combination with the tools of mathematical statistics and probability theory. The assessment of the possible economic effect was carried out taking into account the technical and economic calculations on the criterion of the given

APA, Harvard, Vancouver, ISO, and other styles

39

Lin, Hong Yan, Chun Cai Wang, Cui Yan Yu, and Tao Xu. "Calculation of Nanowire Growth Activation Energy." Advanced Materials Research 512-515 (May 2012): 2064–67. http://dx.doi.org/10.4028/www.scientific.net/amr.512-515.2064.

Full text

Abstract:

Two-step preparation technology was used to prepare anodic aluminum oxide (AAO) templates. Then deposit Ni nanowire arrays in nanopores of AAO templates by direct current deposition. TEM spectra of nanowires show that the length of nanowires is uniform and that the shape of nanowires is the same with that of nanopores. Finally, reaction activation energy of Ni growing in nanopores was calculated by experimental data. Results show that Ni growing in the smaller nanopores is much easier than in the bigger nanopores.

APA, Harvard, Vancouver, ISO, and other styles

40

Popov, I. "Total energy calculation for electrostatic field." Transactions of the Krylov State Research Centre 2, no. 392 (2020): 107–14. http://dx.doi.org/10.24937/2542-2324-2020-2-392-107-114.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

CHEN, Changjun, Yanzhao HUANG, and Yi XIAO. "Free Energy Calculation Methods of Biomolecules." ACTA BIOPHYSICA SINICA 27, no. 5 (2011): 395–402. http://dx.doi.org/10.3724/sp.j.1260.2011.00395.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Tong Guo-ping, Zhao Hua, Liu Jing-nan, and Sun Xin. "ENERGY-BAND CALCULATION OF UNSTABLE LATTICE." Acta Physica Sinica 40, no. 5 (1991): 796. http://dx.doi.org/10.7498/aps.40.796.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Rahal, M., M. Hilali, A. El Hammadi, M. El Mouhtadi, and A. El Hajbi. "Calculation of vibrational zero-point energy." Journal of Molecular Structure: THEOCHEM 572, no. 1-3 (2001): 73–80. http://dx.doi.org/10.1016/s0166-1280(01)00565-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Zahn, Guilherme Soares, Cibele Bugno Zamboni, Frederico Antonio Genezini, Joel Mesa-Hormaza, and Manoel Tiago Freitas da Cruz. "Low-energy levels calculation for 193Ir." Brazilian Journal of Physics 36, no. 4b (2006): 1354–56. http://dx.doi.org/10.1590/s0103-97332006000800004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Kumori, Fujio. "The Calculation Methods of Input Energy." Journal of Rural Problems 30, no. 1 (1994): 32–37. http://dx.doi.org/10.7310/arfe1965.30.32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Poland, Douglas. "Maximum-entropy calculation of energy distributions." Journal of Chemical Physics 112, no. 15 (2000): 6554–62. http://dx.doi.org/10.1063/1.481226.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Lutsko, J. F., D. Wolf, and S. Yip. "Molecular dynamics calculation of free energy." Journal of Chemical Physics 88, no. 10 (1988): 6525–28. http://dx.doi.org/10.1063/1.454437.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Aleksandrov, I. K. "Energy calculation of branched kinematic chains." Russian Engineering Research 35, no. 10 (2015): 763–66. http://dx.doi.org/10.3103/s1068798x15100032.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Fradi, A., S. Brignone, and B. Wollenberg. "Calculation of Energy Transaction Allocation Factors." IEEE Power Engineering Review 21, no. 5 (2001): 64. http://dx.doi.org/10.1109/mper.2001.4311390.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Rath, Biswanath. "Energy-level calculation through perturbation theory." Physical Review A 42, no. 5 (1990): 2520–23. http://dx.doi.org/10.1103/physreva.42.2520.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!