Relevant bibliographies by topics / Calibration Case Study

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Calibration Case Study'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Calibration Case Study.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Calibration Case Study"

1

Toledo, Tomer, Haris N. Koutsopoulos, Angus Davol, Moshe E. Ben-Akiva, Wilco Burghout, Ingmar Andréasson, Tobias Johansson, and Christen Lundin. "Calibration and Validation of Microscopic Traffic Simulation Tools: Stockholm Case Study." Transportation Research Record: Journal of the Transportation Research Board 1831, no. 1 (January 2003): 65–75. http://dx.doi.org/10.3141/1831-08.

Full text
Abstract:
The calibration and validation approach and results from a case study applying the microscopic traffic simulation tool MITSIMLab to a mixed urban-freeway network in the Brunnsviken area in the north of Stockholm, Sweden, under congested traffic conditions are described. Two important components of the simulator were calibrated: driving behavior models and travel behavior components, including origin–destination flows and the route choice model. In the absence of detailed data, only aggregate data (i.e., speed and flow measurements at sensor locations) were available for calibration. Aggregate calibration uses simulation output, which is a result of the interaction among all components of the simulator. Therefore, it is, in general, impossible to identify the effect of individual models on traffic flow when using aggregate data. The calibration approach used takes these interactions into account by iteratively calibrating the different components to minimize the deviation between observed and simulated measurements. The calibrated MITSIMLab model was validated by comparing observed and simulated measurements: traffic flows at sensor locations, point-to-point travel times, and queue lengths. A second set of measurements, taken a year after the ones used for calibration, was used at this stage. Results of the validation are presented. Practical difficulties and limitations that may arise with application of the calibration and validation approach are discussed.
APA, Harvard, Vancouver, ISO, and other styles
2

Acuña, Guillermo J., Humberto Ávila, and Fausto A. Canales. "River Model Calibration Based on Design of Experiments Theory. A Case Study: Meta River, Colombia." Water 11, no. 7 (July 5, 2019): 1382. http://dx.doi.org/10.3390/w11071382.

Full text
Abstract:
Numerical models are important tools for analyzing and solving water resources problems; however, a model’s reliability heavily depends on its calibration. This paper presents a method based on Design of Experiments theory for calibrating numerical models of rivers by considering the interaction between different calibration parameters, identifying the most sensitive parameters and finding a value or a range of values for which the calibration parameters produces an adequate performance of the model in terms of accuracy. The method consists of a systematic process for assessing the qualitative and quantitative performance of a hydromorphological numeric model. A 75 km reach of the Meta River, in Colombia, was used as case study for validating the method. The modeling was conducted by using the software package MIKE-21C, a two-dimensional flow model. The calibration is assessed by means of an Overall Weighted Indicator, based on the coefficient of determination of the calibration parameters and within a range from 0 to 1. For the case study, the most significant calibration parameters were the sediment transport equation, the riverbed load factor and the suspended load factor. The optimal calibration produced an Overall Weighted Indicator equal to 0.857. The method can be applied to any type of morphological models.
APA, Harvard, Vancouver, ISO, and other styles
3

Hall, John J., and Robert L. Williams. "Case study: Inertial measurement unit calibration platform." Journal of Robotic Systems 17, no. 11 (November 2000): 623–32. http://dx.doi.org/10.1002/1097-4563(200011)17:11<623::aid-rob4>3.0.co;2-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Walski, Thomas M. "Case Study: Pipe Network Model Calibration Issues." Journal of Water Resources Planning and Management 112, no. 2 (March 1986): 238–49. http://dx.doi.org/10.1061/(asce)0733-9496(1986)112:2(238).

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, Kangjoo, Mary P. Anderson, and Carl J. Bowser. "Model Calibration with Multiple Targets: A Case Study." Ground Water 37, no. 3 (May 1999): 345–51. http://dx.doi.org/10.1111/j.1745-6584.1999.tb01110.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Holt, Robert W., Jeffrey T. Hansberger, and Deborah A. Boehm-Davis. "Improving Rater Calibration in Aviation: A Case Study." International Journal of Aviation Psychology 12, no. 3 (July 2002): 305–30. http://dx.doi.org/10.1207/s15327108ijap1203_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Parisi, Maria Adelaide, Mariapaola Riggio, Chiara Tardini, and Maurizio Piazza. "Rehabilitation of Timber Structures and Seismic Vulnerability: A Case Study." Advanced Materials Research 133-134 (October 2010): 741–46. http://dx.doi.org/10.4028/www.scientific.net/amr.133-134.741.

Full text
Abstract:
Synthetic methods for the diagnosis of structures and particularly for their vulnerability assessment rely on simplified calculations and visual inspection. Their effectiveness strongly depends on an accurate calibration of the procedure by which data are collected. A recent methodology for the seismic vulnerability assessment of timber roofs in historical buildings has been applied to the Thun Castle during a study for its rehabilitation. The purpose was twofold: testing and calibrating the procedure on a heritage structure and estimating the capability of the roof structure to resist seismic action, as required in a zone of low but not negligible seismicity.
APA, Harvard, Vancouver, ISO, and other styles
8

Estienne, F., D. L. Massart, N. Zanier-Szydlowski, and Ph Marteau. "Multivariate calibration with Raman spectroscopic data: a case study." Analytica Chimica Acta 424, no. 2 (December 2000): 185–201. http://dx.doi.org/10.1016/s0003-2670(00)01107-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

., Falguni Baliarsingh. "REAL TIME RESERVOIR OPERATION (CALIBRATION PHASE): A CASE STUDY." International Journal of Research in Engineering and Technology 03, no. 09 (September 25, 2014): 239–51. http://dx.doi.org/10.15623/ijret.2014.0309037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Parkinson, S., A. P. Longstaff, S. Fletcher, A. Crampton, and P. Gregory. "Automatic planning for machine tool calibration: A case study." Expert Systems with Applications 39, no. 13 (October 2012): 11367–77. http://dx.doi.org/10.1016/j.eswa.2012.03.054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Calibration Case Study"

1

Ar, Kerem. "Calibration Of Water Distribution Networks." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12613934/index.pdf.

Full text
Abstract:
Water distribution network models are used for different purposes. In this study, a model, used for daily operational issues is concerned. Models results should be consistent with actual conditions for sound decisions during operational studies. Adjusting model parameters according to site measurements in order to fit the model to obtain realistic results is known as calibration. Researchers have carried out numerous studies on calibration and developed various methods. In this study, an actual network (N8.3 Pressure Zone, Ankara) has been calibrated by two classical methods developed by Walski (1983) and Bhave (1988). The network parameter calibrated in this study is Hazen-Williams roughness coefficient, C-factor, and other parameters have been lumped in the C-factor. Results of the analysis showed that, C-factors have been found in a wide range.
APA, Harvard, Vancouver, ISO, and other styles
2

Apaydin, Oncu. "Automated Calibration Of Water Distribution Networks." Master's thesis, METU, 2013. http://etd.lib.metu.edu.tr/upload/12615692/index.pdf.

Full text
Abstract:
Water distribution network models are widely used for various purposes such as long-range planning, design, operation and water quality management. Before these models are used for a specific study, they should be calibrated by adjusting model parameters such as pipe roughness values and nodal demands so that models can yield compatible results with site observations (basically, pressure readings). Many methods have been developed to calibrate water distribution networks. In this study, Darwin Calibrator, a computer software that uses genetic algorithm, is used to calibrate N8.3 pressure zone model of Ankara water distribution network
in this case study the network is calibrated on the basis of roughness parameter, Hazen Williams coefficient for the sake of simplicity. It is understood that there are various parameters that contribute to the uncertainties in water distribution network modelling and the calibration process. Besides, computer software&rsquo
s are valuable tools to solve water distribution network problems and to calibrate network models in an accurate and fast way using automated calibration technique. Furthermore, there are many important aspects that should be considered during automated calibration such as pipe roughness grouping. In this study, influence of flow velocity on pipe roughness grouping is examined. Roughness coefficients of pipes have been estimated in the range of 70-140.
APA, Harvard, Vancouver, ISO, and other styles
3

Poon, Phillip, and Matthew Dunlop. "Calibration of High Dimensional Compressive Sensing Systems: A Case Study in Compressive Hyperspectral Imaging." International Foundation for Telemetering, 2013. http://hdl.handle.net/10150/579668.

Full text
Abstract:
ITC/USA 2013 Conference Proceedings / The Forty-Ninth Annual International Telemetering Conference and Technical Exhibition / October 21-24, 2013 / Bally's Hotel & Convention Center, Las Vegas, NV
Compressive Sensing (CS) is a set of techniques that can faithfully acquire a signal from sub- Nyquist measurements, provided the class of signals have certain broadly-applicable properties. Reconstruction (or exploitation) of the signal from these sub-Nyquist measurements requires a forward model - knowledge of how the system maps signals to measurements. In high-dimensional CS systems, determination of this forward model via direct measurement of the system response to the complete set of impulse functions is impractical. In this paper, we will discuss the development of a parameterized forward model for the Adaptive, Feature-Specific Spectral Imaging Classifier (AFSSI-C), an experimental compressive spectral image classifier. This parameterized forward model drastically reduces the number of calibration measurements.
APA, Harvard, Vancouver, ISO, and other styles
4

Kazemzadeh, Samimi Anahita. "Estimation of regional groundwater level through calibration of GRACE satellite data : A case study in southern half of Sweden." Thesis, Högskolan i Gävle, Avdelningen för Industriell utveckling, IT och Samhällsbyggnad, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-13634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Andersson, Sara. "Mapping Uncertainties – A case study on a hydraulic model of the river Voxnan." Thesis, KTH, Mark- och vattenteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-173848.

Full text
Abstract:
This master thesis gives an account for the numerous uncertainties that prevail one-dimensional hydraulic models and flood inundation maps, as well as suitable assessment methods for different types of uncertainties. A conducted uncertainty assessment on the river Voxnan in Sweden has been performed. The case study included the calibra-tion uncertainty in the spatially varying roughness coefficient and the boundary condi-tion uncertainty in the magnitude of a 100-year flood, in present and future climate conditions. By combining a scenario analysis, GLUE calibration method and Monte Carlo analysis, the included uncertainties with different natures could be assessed. Significant uncer-tainties regarding the magnitude of a 100-year flood from frequency analysis was found. The largest contribution to the overall uncertainty was given by the variance between the nine global climate models, emphasizing the importance of including projections from an ensemble of models in climate change studies. Furthermore, the study gives a methodological example on how to present uncertainty estimates visually in probabilistic flood inundation maps. The conducted method of how the climate change uncertainties, scenarios and models, were handled in frequency analysis is also suggested to be a relevant result of the study.
APA, Harvard, Vancouver, ISO, and other styles
6

Chatzakis, Alexandros. "Calibration of a 2D hydrodynamic model for flood inundation extent using aerial photographs : A case study of the Hallsberg flood event in 5-9 September 2015." Thesis, KTH, Vattendragsteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-204901.

Full text
Abstract:
Alteration of rainfall patterns is one major impact of climate change. Rainfall events with big precipitation volumes under short periods of time are predicted to become even more frequent in higher latitude regions, including Sweden. One characteristic example of such an intense rainfall occurred between the 5th and 6th of September 2015 in Hallsberg, a city in central Sweden, where approximately 105 mm of rain fell under 24 hours, causing severe flooding in the city. In order to be able to predict flood cases like the aforementioned one, hydrodynamic models are employed to simulate floods and investigate rainfall scenarios so that the competent authorities can take precaution measures. However, due to lack of calibration data most of flood models are not validated and are comprised of substantial uncertainty. This report aims to study the Hallsberg flood event in September 2015 by calibrating a hydrodynamic model using aerial photographs for the flood inundation extent. The utilized model is MIKE 21, which is a 2D overland flow model developed by DHI. Contrary to the common practice in flood studies where inclusion of the infiltration capacity is implemented with an arbitrary reduction of the rain volume, the infiltration module of MIKE 21, which is a new development in the model, was utilized. Apart from the inundation extent, the outputs were also evaluated for the water depth in two points based on a photograph captured from the streets of the affected area, the description of the course of events for the timing of flood’s culmination and the water volume on the pixels that were erroneously simulated as flooded. The results presented a high degree of agreement with the observations. The parameter of surface resistance, expressed as Manning’s “M”, was found to be of paramount importance with the suitable values for undeveloped areas being below 5. In addition, the culverts’ limited capacity played an important role in the flooding of the city and hence including them in the simulations is crucial. Finally, utilization of the infiltration module resulted in a higher accuracy of 8.3% although it can be considered more of an arbitrary deduction of water as some of the parameters used in it are not physically well justified.
Ändringar i nederbördsmönster är en tydlig konsekvens av klimatförändringen. Regnhändelser med stora volymer nederbörd under korta tidsperioder förutses bli alltmer frekventa i regioner vid högre breddgrader, däribland Sverige. Ett karaktäristiskt exempel av en sådan händelse skedde mellan den femte och sjätte september 2015 i Hallsberg. Ca 105 mm regn föll inom loppet av 24 timmar vilket orsakade stora översvämningar i staden. För att kunna förutse översvämningar så som den tidigare nämnd och möjliggöra vidtagning av förebyggande åtgärder används hydrodynamiska modeller för att simulera vattenflöden och undersöka möjliga scenarion av nederbörd. Emellertid, på grund av avsaknaden av data för kalibrering av modellerna medför användandet av dem en signifikant osäkerhet. Syftet med den här rapporten är att undersöka översvämningen i Hallsberg i september 2015 genom att kalibrera en hydrodynamisk modell med hjälp av flygbilder för översvämningens utbredning. Den använda modellen, MIKE 21, är en 2D modell över ytavrinningen utvecklad av DHI. Praxis vid studiet av översvämningar är att inkludera infiltrationsförmåga med ett godtyckligt avdrag av nederbörden. Här används istället infiltreringsmodulen för MIKE 21, vilket är en ny del som har utvecklats i modellen. Förutom översvämningens utbredning utvärderades även resultaten utifrån vattendjupet vid två punkter baseras på ett fotografi från gatorna i det drabbade området. Utvärdering av resultaten gjordes också mot tid av översvämnings kulm från beskrivning av händelses förlopp samt vattenvolym vid pixlarna som felaktigt simulerades som översvämmade. Resultatet visade på en hög grad av samstämmighet med gjorda observationer. Parametern ytans råhet, uttryckt som Mannings ”M”, visade sig vara av stor betydelse med lämpliga värden för underutvecklade områden under 5. Därtill spelade kulvertarnas begränsade kapacitet en viktig roll vid översvämmandet av staden. Att inkludera dessa i simuleringarna var därför avgörande. Slutligen, användandet av infiltreringsmodulen resulterade i en högre noggrannhet av 8.3 %, även om det kan anses vara ett godtyckligt vattenavdrag då vissa av de använda parametrarna inte är fysiskt välmotiverade.
APA, Harvard, Vancouver, ISO, and other styles
7

Le, Maître Johann. "Développement de la spectrométrie de masse à ultra- haute résolution associée à la spectrométrie de mobilité ionique pour la caractérisation de coupes pétrolières lourdes. structural analysis of heavy oil fractions afterr hydrodenitrogenation by high-resolution tandem mass spectrometry and ion mobility spectrometry Structural analysis of neutral nitrogen compounds refractory to the hydrodenitrogenation process of heavy oil fractions by high-resolution tandem mass spectrometry and ion mobility-mass spectrometry Chemical characterization of 15 biocrudes obtained from hydrothermal liquefaction of industrially cultivated wild micro algae Chemical characterization with different analytical techniques, a way to understand the process: Case of the paraffinic base oil production line Exploring complex mixtures by cyclic ion mobility high-resolution mass spectrometry – Application towards Petroleum. Simulation and modeling of Collision Cross Section for structural elucidation of heavy oil fraction by ion mobility-mass spectrometry: Using polyaromatic hydrocarbons compounds mixture as calibration standard Characterization of sulfoxides compounds in dimeric distribution of heavy oil fractions by positive-ion electrospray ionization FTICR mass spectrometry Structural analysis of Petroporphyrins from asphaltene by trapped ion mobility coupled with a Fourier transform ion cyclotron resonance mass spectrometer. Cyclic ion mobility spectrometry coupled to high-resolution time-of-flight mass spectrometry equipped with atmospheric solid analysis probe for the molecular characterization of combustion particulate matter. Structural study of analogues of Titan’s haze by trapped ion mobility coupled with a Fourier transform ion cyclotron mass spectrometer." Thesis, Normandie, 2020. http://www.theses.fr/2020NORMR051.

Full text
Abstract:
L'évolution des réserves de pétrole implique l'utilisation en raffinerie de pétroles bruts non conventionnels, bien souvent plus lourds et donc difficiles à caractériser. Les produits pétroliers sont en effet des mélanges chimiques extrêmement complexes. La partie légère et volatile peut être analysée par chromatographie en phase gazeuse couplée à la spectrométrie de masse (GC/MS), permettant l'identification des composés par l'utilisation de mesures de masses précises et de modèles de fragmentation. Cependant ces techniques sont inadaptées à l'analyse des fractions lourdes. Dans la pratique, la caractérisation des mélanges les plus complexes implique l'utilisation de spectromètres de masse à ultra-haute résolution généralement par analyse directe sans séparation chromatographique. La technique de référence est aujourd’hui la spectrométrie de masse à transformée de Fourier par résonance cyclotronique des ions (FTICR). Grâce à une résolution supérieure à 106 et à une précision de mesure de masse inférieure à 0,1 ppm, cet instrument permet de séparer toutes les espèces présentes dans un produit pétrolier et d'attribuer à chaque valeur de m/z une composition élémentaire unique. Ceci permet d'obtenir très facilement des cartes moléculaires qui peuvent être présentées graphiquement en utilisant le diagramme de Kendrick, le diagramme de van Krevelen ou le nombre d'insaturations (DBE) en fonction du nombre de carbones. Ce travail de thèse a permis grâce à la caractérisation moléculaire de produits pétroliers (Vacuum Gas Oil, Pétroles Bruts, Matériel Interfacial, Asphaltènes et Bio-Oil…) d'aborder la complexité de leur traitement dans l’outil de raffinage. Des protocoles d'analyses des échantillons ont été développés, à l'aide de différentes sources d'ionisation à pression atmosphérique (ESI, APCI et APPI) ainsi que par désorption/ionisation laser (LDI) sur le spectromètre de masse FTICR 12T. Les informations sur le contenu isomérique des produits pétroliers ont ensuite été déterminées grâce à l'apport de la spectrométrie de mobilité ionique (IMS)
The evolution of oil reserves requires the use in refineries of unconventional crude oils, which are often heavier and therefore difficult to characterize. Petroleum products are in fact extremely complex chemical mixtures. The light and volatile part can be analysed by gas chromatography coupled with mass spectrometry (GC/MS), allowing the identification of compounds by using precise mass measurements and fragmentation models. However, these techniques are inappropriate for the analysis of heavy fractions. In practice, the characterization of the most complex mixtures involves the use of ultra-high-resolution mass spectrometers generally by direct analysis without chromatographic separation. The reference technique today is Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FTICR). With a resolution of more than 106 and a mass measurement accuracy of less than 0.1 ppm, this instrument can separate all the species present in a petroleum product and assign a unique elemental composition to each m/z value. This makes it very easy to obtain molecular maps that can be presented graphically using the Kendrick diagram, the van Krevelen diagram or the number of unsaturations (DBE) as a function of the number of carbons. This thesis work has allowed thanks to the molecular characterization of petroleum products (Vacuum Gas Oil, Crude Oil, Interfacial Material, Asphaltenes and Bio-Oil...) addressing the complexity of their treatment in the refining tool. Protocols for sample analysis have been developed, using different sources of ionization at atmospheric pressure (ESI, APCI and APPI) as well as laser desorption/ionization (LDI) on the FTICR 12T mass spectrometer. Information on the isomeric content of petroleum products was then determined using ion mobility spectrometry (IMS)
APA, Harvard, Vancouver, ISO, and other styles
8

Chung, Hsiu Hsuan, and 鍾秀瑄. "Calibration laboratory selection study--A case study of semiconductor assembly." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/m5r773.

Full text
Abstract:
碩士
國立清華大學
工業工程與工程管理學系碩士在職專班
104
The purpose of this study is to identify the key third-party calibration laboratory selection criteria for the semiconductor assembly and test company in Taiwan. Literature on calibration laboratory selection, that considers several matters such as professionalism, calibration fee, uncertainty, are relatively limited. However, both international standards and company’s customers have required that all gauges, measuring instrument should provide calibration activity record to provide evidence of conformity to product requirement. The value of this research provides a systematic laboratory selection model. Initially, identifying the critical criteria and classifying the quality attribute by the fuzzy Delphi method and Fuzzy Kano model separately. In the second phase, calculate the important weight of criteria by the AHP. Finally, ranking qualified calibration laboratory by the VIKOR. Creating a procurement contract with a filtered and qualified calibration laboratory to reduce the annual calibration cost. In addition, it not only can complete periodic calibration to avoid auditing finding but also ensure the accuracy of instrument to avoid unnecessary customer complaint. The proposed approach has also been examined by a case study. The research result shows that must-be attribute is the most important criterion group. At the detailed sub-criteria level, instrument capability, specialize knowledge, calibration fee, send and receive service and laboratory management are the top five criteria. Therefore, the decision-makers have shown much concern for accuracy and resolution of standard unit, standard unit maintenance and calibration record, lab staff’s technical and quality management skills, reasonable calibration fee and send/receive service.
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Jiun-han, and 李郡漢. "A Case Study for the Development Strategy in Instrument Calibration Industry." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/u7tr23.

Full text
Abstract:
碩士
國立臺灣科技大學
工業管理系
94
Any Industry during the process of researching and developing the products，or making，designing products，or at the stage of testing，will not guarantee the quality of the products unless it relies on the monitoring and the quantity of the precision instrument to examine it’s products。And technology of the instrument corrected especially guarantees the accuracy of the instrument。It has also been proved that the industry that corrects instrument has close relations with the development of the hi-tech industry。In order to have a clear understanding of prospect of the Industry that corrects instrument this research is to do deep discussion about it with the title of future development tactics of the industry that corrects instrument。 This research is to point out the change and the threat which the whole industry environment brought toward the industry that corrects instrument，to analyze the chance and threat by means the case company inside and outside。Because there are so many competitors of correcting industry of the instrument and they face the great changeable environment，these competitors must face the question of making the transition by themselves。The solution is that through developing new verification，calibration technology and establishing the researching-developing group，the competitors can make the transition and make measuring platforms to set up technology，and to become diversified measuring–correcting laboratories and to become the groups which design and produce key spare parts。This development tactics have already become the key point with which the unit of correcting industry of the instrument can get the current situation made transition and succeed。In order to solve the current problem of he case enterprise，this research sets about from the company’s mission and management tactics in order to understand and analyze the future thrust of the case company，and to probe into the development tactics in the future，to enable case enterprises to have one criterion to use on solving problems 。Finally，this research also proposes the suggestion on other same trades，and makes them get a clear reference directions。
APA, Harvard, Vancouver, ISO, and other styles
10

Tsai, Yu-Min, and 蔡育旻. "Service expectation and cognition: A case study of SGS calibration laboratory." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/98365482916299503636.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Calibration Case Study"

1

Tavares Neto, Roberto, and Fabio Molina da Silva. "Scheduling Simultaneous Resources: A Case Study on a Calibration Laboratory." In Hybrid Metaheuristics, 150–63. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-05983-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Graybill, Philip, Eyob Tarekegn, Ian Tomkinson, Kendra Van Buren, François Hemez, and Scott Cogan. "A Case Study in Predictive Modeling Beyond the Calibration Domain." In Model Validation and Uncertainty Quantification, Volume 3, 29–37. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-54858-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Grejner-Brzezinska, Dorota A., Niyazi Arslan, Pawel Wielgosz, and Chang-Ki Hong. "Network Calibration for Unfavorable Reference-Rover Geometry in Network-Based RTK: Ohio CORS Case Study." In CORS and OPUS for Engineers, 143–53. Reston, VA: American Society of Civil Engineers, 2011. http://dx.doi.org/10.1061/9780784411643.ch18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

de Oliveira, Antonio Krishnamurti Beleño, Osvaldo Moura Rezende, Matheus Martins de Sousa, and Marcelo Gomes Miguez. "An Alternative Model Calibration Strategy for Watersheds Lacking Proper Data Records: Case Study of Riohacha, Colombia." In New Trends in Urban Drainage Modelling, 746–51. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99867-1_129.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chui, Q. S. H., R. R. Zucchini, and J. Lichtig. "The Importance of Assessing Uncertainties Related to Linear Calibration Curves: A Case Study for Flame Atomic Absorption Spectrometry." In Environmental Geochemistry in Tropical and Subtropical Environments, 69–80. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-07060-4_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Di Nardo, Armado, Michele Di Natale, Anna Di Mauro, Giovanni Francesco Santonastaso, Andrea Palomba, and Stefano Locoratolo. "Calibration of a Water Distribution Network with Limited Field Measures: The Case Study of Castellammare di Stabia (Naples, Italy)." In Lecture Notes in Computer Science, 433–36. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-05348-2_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lovreglio, Ruggiero, Charitha Dias, Xiang Song, and Lucia Ballerini. "Towards Microscopic Calibration of Pedestrian Simulation Models Using Open Trajectory Datasets: The Case Study of the Edinburgh Informatics Forum." In Traffic and Granular Flow '17, 215–23. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-11440-4_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mahanta, Rupam, and R. K. Ghanekar. "Site-Specific Calibration of Nkt and N∆u Factors for Interpretation of Cone Penetration Test for Offshore Sites: A Case Study." In Lecture Notes in Civil Engineering, 123–35. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6086-6_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Michelet, Sandra, Vanda Luengo, Jean-Michel Adam, and Nadine Mandran. "Experimentation and Results for Calibrating Automatic Diagnosis Belief Linked to Problem Solving Modalities: A Case Study in Electricity." In Sustaining TEL: From Innovation to Learning and Practice, 408–13. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16020-2_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Calibration of concrete laboratories. Case study from Libya." In Test Quality for Construction, Materials and Structures, 109–14. CRC Press, 1990. http://dx.doi.org/10.1201/9781482267525-20.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Calibration Case Study"

1

Mariano, Andre, and Francois Rivet. "Calibration requires calibration, a case study: Mixed-signal BISC Time-Interleaved ADC." In 2012 IEEE 10th International New Circuits and Systems Conference (NEWCAS). IEEE, 2012. http://dx.doi.org/10.1109/newcas.2012.6329032.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chang, Hsiu-Ming, Kuan-Yu Lin, and Kwang-Ting Cheng. "Calibration as a Functional Test: An ADC Case Study." In 2009 Asian Test Symposium. IEEE, 2009. http://dx.doi.org/10.1109/ats.2009.25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lippai, Istvan. "Colorado Springs Utilities Case Study: Water System Calibration / Optimization." In Pipeline Division Specialty Conference 2005. Reston, VA: American Society of Civil Engineers, 2005. http://dx.doi.org/10.1061/40800(180)84.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yue -Yun Wang. "Model-based calibration: A case study for calibrating control systems of downsized boosted engines." In 2015 American Control Conference (ACC). IEEE, 2015. http://dx.doi.org/10.1109/acc.2015.7171044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Suroso, Irene, and Polly Boissevain. "Using Tracer Field Testing for Model Calibration: A Case Study." In 12th Annual Conference on Water Distribution Systems Analysis (WDSA). Reston, VA: American Society of Civil Engineers, 2011. http://dx.doi.org/10.1061/41203(425)69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ghosh, Sanjib K., and Mohamed Bougouss. "On-The-Job Calibration Of Tomodensitometric Systems - A Case Study." In Biostereometrics '88: Fifth Intl Mtg, edited by Juerg U. Baumann and Robin E. Herron. SPIE, 1989. http://dx.doi.org/10.1117/12.950483.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dawidowicz, Karol, Grzegorz Krzan, Radosław Baryła, and Krzysztof Swiatek. "The Impact of GNSS Antenna Mounting during Absolute Field Calibration on Phase Center Correction – JAV_GRANT-G3T Antenna Case Study." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.183.

Full text
Abstract:
The phase center corrections (PCC) of an GNSS antenna can be precisely determined using the absolute field calibration procedure with a precise robot. Using the Hannover’s automated absolute antenna field calibration technique developed by the Institute of Geodesy (University of Hannover) and Geo++ we demonstrate that the way of antenna mounting on the robot (distance from mechanical structures mounted underneath the antennas) can cause significant changes in the phase center offset and variations. For both the GPS and the GLONASS carrier signals L1 and L2 these changes are in the order of several millimeters. e also analyzed how these changes transfer to the coordinate domain. We investigated the differences between position estimates obtained using two different, individual and type-mean, elevation dependent PCC. There days of GNSS observations on very short baseline were used for these studies. The position time-series were derived using the RTKLib software package. We found that that the differences in the calibrations models propagate directly into the position domain, affecting sub-daily results and giving visible periodic variations in solutions. The best agreement with the “true position” we obtained using PCC from the individual calibrations.
APA, Harvard, Vancouver, ISO, and other styles
8

Dervisoglu, Gunes, Alexander Kurzhanskiy, Gabriel Gomes, and Roberto Horowitz. "Macroscopic freeway model calibration with partially observed data, a case study." In 2014 American Control Conference - ACC 2014. IEEE, 2014. http://dx.doi.org/10.1109/acc.2014.6859026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Can Polat, Halis, Veysel Okan Atak, Ismail Ergun Kocabicak Turkish, Emrah Gurcay, Fatih Guven Gultekin, and Erhan Erdi Yanteri. "Satellite Imagery Calibration and Quality Assessment Tests: GÖKTÜRK-L Case Study." In 2019 9th International Conference on Recent Advances in Space Technologies (RAST). IEEE, 2019. http://dx.doi.org/10.1109/rast.2019.8767436.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fulton, C., and W. Chappell. "Calibration of panelized polarimetric phased array radar antennas: A case study." In 2010 IEEE International Symposium on Phased Array Systems and Technology (ARRAY 2010). IEEE, 2010. http://dx.doi.org/10.1109/array.2010.5613262.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Calibration Case Study' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography