To see the other types of publications on this topic, follow the link: Car dumper.

Journal articles on the topic 'Car dumper'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Car dumper.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Chepurchenko, Ilya V., and Svetlana V. Korkina. "State of open wagon body when loading on a rotary car dumper." Nexo Revista Científica 34, no. 06 (2021): 1667–76. http://dx.doi.org/10.5377/nexo.v34i06.13127.

Full text
Abstract:
The use of modern means of mechanization of loading and unloading operations in places of mass processing of bulky loads in railway and water connection allows to increase the efficiency and productivity of various types of transport, to ensure the safety of load and rolling stock. The most common method of unloading open wagons in ports, mining enterprises, thermal power plants, etc. is the use of special rotary car dumpers. However, it should be noted that unloading on the car dumpers leads to damage of the carriages structural elements. The article presents the results of strength calculati
APA, Harvard, Vancouver, ISO, and other styles
2

Jia, Yuanming, Yiying Zhou, and Weitong Guo. "Comprehensive Study of Load Characteristics of O-type Rotor Car Dumper Based on Measurements." Advances in Engineering Technology Research 11, no. 1 (2024): 245. http://dx.doi.org/10.56028/aetr.11.1.245.2024.

Full text
Abstract:
The car dumper, an essential apparatus for unloading bulk materials, is increasingly critical across various sectors such as electricity generation, metallurgy, and operations at port terminals. This significance stems from its continuous operational capacity, which significantly boosts the efficiency of bulk material handling and optimizes the overall processes at industrial sites. This research paper delves into the power quality problems associated with car dumper applications, particularly focusing on the harmonic disturbances caused by inverters used within these systems. Such disturbance
APA, Harvard, Vancouver, ISO, and other styles
3

Dovhaniuk, Stepan, Volodymyr Kalashnyk, Alexei Reidemeister, and Oleksandr Shykunov. "Investigation of possibility of hopper cars unloading on the car dumper VRS–134M." MATEC Web of Conferences 294 (2019): 06003. http://dx.doi.org/10.1051/matecconf/201929406003.

Full text
Abstract:
It was developed a computational model to evaluate the body strength of short base hopper models 19-758-01, 20-471, and 20-4015 when unloading them on the car dumper VRS–134M. Modeling of the stress-strain state of the car design was made using the finite element method. It was established that in terms of strength, bodies of the hopper models 19-758-01, 20-471, and 20-4015 are suitable for unloading on car dumper. The results of experimental studies showed sufficiently high accuracy of the chosen computational model for estimating the stress-strain state of design and confirmed the possibilit
APA, Harvard, Vancouver, ISO, and other styles
4

Булычев, Михаил, Mihail Bulychev, Дмитрий Антипин, and Dmitriy Antipin. "IMPROVEMENT OF STRENGTH CALCULATION PROCEDURE OF CAR SIDE UPPER FRAMING IN GONDOLA CARS." Bulletin of Bryansk state technical university 2019, no. 3 (2019): 58–64. http://dx.doi.org/10.30987/article_5c8b5ceb111c58.12769482.

Full text
Abstract:
Standard rated schemes for a gondola car are considered at the calculation of loading in a car dumper. There are offered refined rated schemes taking into account frozen load unloading at car turning of 90º and a buffer stop displacement of the car dumper. It is shown that the supposed rated schemes allow re-vealing the stress increase in an upper framing as compared with standard rated schemes.
APA, Harvard, Vancouver, ISO, and other styles
5

Jin, He Rong, Xiu Chun Lu, He Zhang, and Ya Li Yi. "Research on Synchronization Control of Dual-Motor Driving for Large Rotary Car Dumper." Applied Mechanics and Materials 229-231 (November 2012): 2166–69. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.2166.

Full text
Abstract:
Car dumper is an important material transport equipment which has characteristics such as large structure, heavy duty, low frequency operation, stop-and-go and recurrent excursion of machine barycenter. This paper researched implementation of synchronization control. A fuzzy controller is added between two channels of dual drive subsystem. Based on coordinated control principle and achieving the goal of difference minimum of corresponding state of two subsystem, a fuzzy correction control program using in-phase error non-uniform common feedback is adopted to make the output of two synchronous
APA, Harvard, Vancouver, ISO, and other styles
6

Stefanenko, Valery T., Nina P. Popova, and Svetlana V. Malysheva. "TECHNICAL APPROACHES OF ASPIRATION OF CAR DUMPER." Koks i khimiya, no. 2 (2023): 34–37. http://dx.doi.org/10.52351/00232815_2023_02_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Simion, Petru, Bogdan Istrate, Corneliu Munteanu, Vasile Dia, Petru Avram, and Marius Stelian Imbrea. "Influence of the Degree of Cold Drawing on the Microstructure and Properties of Pipes Used for Dampers." Advanced Materials Research 1036 (October 2014): 134–39. http://dx.doi.org/10.4028/www.scientific.net/amr.1036.134.

Full text
Abstract:
Dumpers are the main components of the suspension system with vertical oscillations role in the absorption of the automobile. The combination of suspension coil with dumper is forming the main body of the suspension system. Shock absorber pipe is mainly used for production of motorcycles, cars (sedan) car shock absorber, is the size of the relatively high precision seamless pipe products, its manufacturing costs and lower selling prices relatively seamless, with excellent cost performance, got the car and motorcycle manufacturing industry recognition, are gradually replacing the use of seamles
APA, Harvard, Vancouver, ISO, and other styles
8

Viznyak, Ruslan. "THE SIGNIFICANCE OF DYNAMIC FORCES ACTING ON A GONDOLA CAR WHEN UNLOADING BY A ROTARY CAR DUMPER." Collection of Scientific Works of the Ukrainian State University of Railway Transport, no. 203 (March 27, 2023): 35–44. http://dx.doi.org/10.18664/1994-7852.203.2023.277952.

Full text
Abstract:
The article considers the factors influencing the strength of gondola cars during unloading on rotary car dumpers, before which a preliminary careful analysis of their characteristic damage and malfunctions was carried out. The calculated schemes of the system design are constructed and the analytical determination of the inertial components of the dynamic overturning process is performed. Initial recommendations for the design of the body structure, which is exposed to high dynamic loads during the mandatory unloading of the freight vehicle. The issue of fleet conservation is important for ow
APA, Harvard, Vancouver, ISO, and other styles
9

Lu, Xiu Chun, Jia Wei Xu, Cai Jun Liu, He Rong Jin, and Ji Fang Qu. "Design Research on Low Speed and Overloaded Transmission System Based on Design Principle of Reverse Transformation." Applied Mechanics and Materials 229-231 (November 2012): 2407–10. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.2407.

Full text
Abstract:
As a typical large rotary dual-drive device, three-car dumper is an essential and important equipment of raw materials storage and transport in the power, chemical industry, metallurgy, ports and other industries. It has some characters such as massive structure, heavy bearer, low-frequency running, frequent starting and braking and mechanical center of gravity which often shifts. The low-speed drive system has some working characteristics such as heavy loads, heavy shocks, low speed, poor working conditions, often breaking teeth and so on, so we propose a reverse design method for low-speed o
APA, Harvard, Vancouver, ISO, and other styles
10

Nosyrev, Dmitriy Yakovlevich, Ilya Vadimovich Chepurchenko, and Svetlana Vladimirovna Korkina. "Determination of inertial dynamic loads acting on open box car body during unloading in a rotary car dumper." Transport of the Urals, no. 4 (2018): 63–67. http://dx.doi.org/10.20291/1815-9400-2018-4-63-67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Kovalev, R., A. Sakalo, V. Yazykov, A. Shamdani, R. Bowey, and C. Wakeling. "Simulation of longitudinal dynamics of a freight train operating through a car dumper." Vehicle System Dynamics 54, no. 6 (2016): 707–22. http://dx.doi.org/10.1080/00423114.2016.1153115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Viznyak, Ruslan. "DETERMINATION THE PARAMETERS OF STRESSED AND DEFORMED STATE A GONDOLA CAR AT DURING INTERACTION BY A ROTARY CAR DUMPER." Collection of Scientific Works of the Ukrainian State University of Railway Transport, no. 204 (June 21, 2023): 53–61. http://dx.doi.org/10.18664/1994-7852.204.2023.283882.

Full text
Abstract:
In the article the specifics of force factors namely operating loads influencing durability of bodies of gondola cars at their unloading on stationary rotary car tippers are processed, possible characteristic damages and malfunctions at the same time are analyzed. Finite-element models of the structure are constructed and the stress-strain state is estimated. Recommendations for modernization by designing and strengthening those structural areas of the body that are subject to extreme exposure to operating loads, according to the design regime, which is due to the use of unloading on a car dum
APA, Harvard, Vancouver, ISO, and other styles
13

Cui, Fa Yi, and Lei Lei Ma. "F-RBFNN Used for Tuning Parameters of Adaptive PID Control for the Drive Motor of Car Dumper." Advanced Materials Research 915-916 (April 2014): 430–35. http://dx.doi.org/10.4028/www.scientific.net/amr.915-916.430.

Full text
Abstract:
In the current environment of energy saving, dumper run energy efficiently that has great practical significance. The drive motor speed determines the roll-over machine efficiency, with the result that motor speed optimal control using adaptive PID control system. Contrary to the volume of PID control, using neural network online-tuning; On hand of network selection, RBFNN and F-RBFNN are selected. Compared with the classical PID control, the PID control based on F-RBFNN and RBFNN achieve the amount of online tuning the parameters of PID control. Especially, compared with RBFNN, F-RBFNN which
APA, Harvard, Vancouver, ISO, and other styles
14

Perwira, Rizky Agung, Rizqi Wahyudi, and Andhyka Tyaz Nugraha. "Analisis Efektivitas Rotary Car Dumper (RCD) 3 dengan Metode Overall Equipment Effectiveness (OEE) di PT Bukit Asam Unit Pelabuhan Tarahan." JURNAL INTEGRASI 16, no. 1 (2024): 48–57. http://dx.doi.org/10.30871/ji.v16i1.6675.

Full text
Abstract:
PT Bukit Asam Unit Pelabuhan Tarahan memiliki mesin dan alat yang digunakan untuk membantu aktivitasnya dan tentunya secara tidak langsung menunjang produktivitasnya, salah satu mesin tersebut yaitu Rotary Car Dumper (RCD) 3. Metode Overall Equipment Effectiveness (OEE) dapat mengidentifikasi kemacetan pada sebuah alat atau mesin yang digunakan di perusahaan. Penggunaan metode Six Big Losses pada penelitian ini dapat mengetahui faktor apa saja yang memberikan kontribusi terbesar yang mengakibatkan rendahnya efektivitas penggunaan mesin RCD 3 di PT Bukit Asam Tbk unit Pelabuhan Tarahan. Setelah
APA, Harvard, Vancouver, ISO, and other styles
15

Isnaeni, Kemas Moh Ade, Febri Hariyanto, and Roby Cahyadi. "A ANALISA TROUBLESHOOTING PADA ROTARY CAR DUMPER DAN PENGARUHNYA TERHADAP WAKTU PEMBONGKARAN BATUBARA DI UNIT PELABUHAN TARAHAN PT BUKIT ASAM, Tbk." Jurnal Teknik Patra Akademika 12, no. 02 (2021): 26–34. http://dx.doi.org/10.52506/jtpa.v12i02.132.

Full text
Abstract:
PT Bukit Asam, Tbk. adalah perusahaan milik negara yang bergerak di bidang pertambangan batubara, pengiriman batubara menggunakan kereta api dari tambang menuju ke Pelabuhan Tarahan. Unit Pelabuhan Tarahan adalah pelabuhan utama milik PT Bukit Asam, Tbk. yang melayani penjualan dalam negeri maupun luar negeri dengan pengiriman menggunakan kapal atau tongkang. Kereta batubara dibongkar di Pelabuhan Tarahan dengan menggunakan alat yaitu Rotary Car Dumper 3. Alat ini memiliki beberapa trouble dan troubleshooting antara lain : 1. masalah kelistrikan (Emergency Stop Relay Trip) yang di akibatkan pa
APA, Harvard, Vancouver, ISO, and other styles
16

A, Svietazarov, and Kovalev M. "THE THEORETICAL SUBSTANTIATION OF THE COMPUTATIONAL ALGORITHM OF FUEL CONSUMPTION BY DUMP TRUCKS." National Transport University Bulletin 1, no. 46 (2020): 304–12. http://dx.doi.org/10.33744/2308-6645-2020-1-46-304-312.

Full text
Abstract:
The purpose of article is to determine, design and construct (optimize) algorithm of quantitative and qualitative indicators of efficiency of use and economy of fuel by dump trucks during unloading cycle. The article considers a group of factors on which fuel consumption depends and determines which factors are the priority. An analysis of the existing normative calculation of fuel consumption for dump trucks, which operates in Ukraine at the state level. Also, in the article the fuel consumption is considered depending on the loading characteristic of the car-dumper at different speed of rota
APA, Harvard, Vancouver, ISO, and other styles
17

Gusyatnikov, N., and A. Kakunina. "Investigation of possible ways of improving the technology of work of railway station Vanino in interaction with JSC Vanino commercial sea port." Bulletin of Science and Practice, no. 5 (May 14, 2017): 120–26. https://doi.org/10.5281/zenodo.579738.

Full text
Abstract:
In recent years, due to the reorientation from the West to the East, there is an increase volume of goods transported through the Vanino — Sovetskaya Gavan transport hub, in connection with the relevant question becomes efficient operation of the railway station Vanino, while increasing its processing capacity. The article gives a detailed analysis of the local car idle for items Vanino station identified “bottlenecks”. According to the analysis suggested a number of measures to normalize the operation of the plant and reduce the time and monetary costs.
APA, Harvard, Vancouver, ISO, and other styles
18

Popov, A. T., O. A. Suslova, and E. A. Voronkova. "Optimization of the Process of Unloading of Iron Ore Raw Materials: The Case of a Steel Plant." World of Transport and Transportation 18, no. 3 (2020): 148–62. http://dx.doi.org/10.30932/1992-3252-2020-18-148-162.

Full text
Abstract:
The process of unloading iron ore raw materials of the metallurgical plant to the sinter plant has not been considered for a long time as a particular topic. Over the last years the conditions of metallurgical production have undergone certain changes: its intensification has occurred, which entails the need to re-evaluate parameters of stable operation of sinter production. The objective of the suggested study is to consider the issues of possible technical and technological improvement harmonizing transport flows with the requirements of the main production process. To achieve this goal, a t
APA, Harvard, Vancouver, ISO, and other styles
19

Дженчако and V. Dzhenchako. "INVESTIGATION OF THE DEFROSTING PROCESS OF LOOSE CARGO IN CARS USING COMPUTER MODELLING METHOD." Alternative energy sources in the transport-technological complex: problems and prospects of rational use of 2, no. 1 (2015): 93–97. http://dx.doi.org/10.12737/13857.

Full text
Abstract:
With the use of computer modeling method, we studied the influence of factors on the weight remains of the cargo in the car after the warm-up and unloading the rotary car dumpers. Construct a dendrogram and developed a regression model, characterizing the quality of heating. Completed computer simulation of the joint influence of factors on the weight remnants of the cargo in the car
APA, Harvard, Vancouver, ISO, and other styles
20

Mineyev, S. P., A. A. Prusova, M. A. Vygodin, and A. S. Mineyev. "Major technological solutions for efficient unloading the frozen cargo from railway gondola cars." Science and Transport Progress, no. 40 (April 25, 2012): 124–30. http://dx.doi.org/10.15802/stp2012/7021.

Full text
Abstract:
The basic progressive solutions put into the technology of destructing the frozen cargo in railway gondola cars before its unloading during winter time are considered. The static vibrocrashing unit, special defreezing garages (convective, combined, with infra-red radiators and torches), car dumpers and crash-milling machines are considered.
APA, Harvard, Vancouver, ISO, and other styles
21

S. P. Minyeyev, А. А. Prusova, M. А. Vyhodin, and А. S. Minyeyev. "TECHNOLOGICAL SOLUTIONS ON EFFECTIVE UNLOADING OF CARGO FROM FROZEN TOGETHER RAILWAY OPEN WAGONS." Bridges and tunnels: Theory, Research, Practice, no. 1 (April 5, 2015): 49–54. http://dx.doi.org/10.15802/bttrp2012/25618.

Full text
Abstract:
The basic progressive decisions witch are put in technology of the destructions of the frozen cargo in railway gondola cars before its unloading during winter time are considered. The static vibrocrashing unit, special unfreezing garages (convective, combined, with infra-red radiators and torches), car dumpers and crash-milling machines are considered
APA, Harvard, Vancouver, ISO, and other styles
22

D, Ganesh, Vijay Saxena, Daljeet Pal Singh, and Pramod Kumar Faujdar. "Neural Network based Direct Torque Controller of SRM for EV Application." E3S Web of Conferences 540 (2024): 02003. http://dx.doi.org/10.1051/e3sconf/202454002003.

Full text
Abstract:
the control aspects of the elecytric vehicle are presented in this paper. The electric car which is driven by a 6/4 Switched Reluctance Motor (SRM) powered by four battery banks is presented in this paper. The new topology of converter is proposed to drive SRM effectively for application of electric car. The direct torque controller is implemented with the help of neural network for effective speed controller with minimum ripples in torque. The required pulses are generated with space vector Pulse Width Modulation (PWM) technique. The electromagnetic torque generated by SRM needs to be maintai
APA, Harvard, Vancouver, ISO, and other styles
23

Arif Nuryono, S.T., M.T., Alloysius Vendhi Prasmoro, S.T., M.T, and Gusti Andhika Aji. "Upaya Peningkatan Productivity Mesin Extrusion 2500 Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Six Big Losses Studi Kasus PT XYZ." JURNAL BHARA PETRO ENERGI 1, no. 3 (2022): 1–11. http://dx.doi.org/10.31599/bpe.v1i3.1738.

Full text
Abstract:
PT. XYZ is engaged in manufacturing in making aluminum profile products during the last one year period. XYZ company did not reach its production target by an average of 6.24%. As for the reasons why the production target did not reach the target, one of them was due to the high downtime of the extrusion machine 2500 which exceeded the company standard, namely 7800 minutes per year, the downtime of the extrusion machine 2500 in the last year was 9807 minutes. The purpose of this study is to reduce the downtime value of the extrusion machine using the OEE method (overall equipment effectiveness
APA, Harvard, Vancouver, ISO, and other styles
24

Treskin, S. V. "Classification of methods for fixing brake checks in the shoes of the brake lever transmission of freight cars." Herald of the Ural State University of Railway Transport, no. 2 (2024): 111–20. http://dx.doi.org/10.20291/2079-0392-2024-2-111-120.

Full text
Abstract:
The article is devoted to ensuring reliable fixation of brake checks in the shoes of the brake lever transmission of freight cars. It is shown that mainly the loss of brake checks occurs when unloading freight cars with car dumpers. The reason for the loss of brake checks is the imperfection of the way the brake pad is connected to the shoe. The scientific works, which present the designs of the brake check, brake shoe and pads, are analyzed, the advantages and disadvantages of such designs are considered. The author of the article proposes a classification of methods to prevent the loss of br
APA, Harvard, Vancouver, ISO, and other styles
25

Gang, X. Y., Zhe He Yao, and Zi Chen Chen. "A Horizontal Vibration Wave Model for High Speed Elevators." Key Engineering Materials 297-300 (November 2005): 1585–91. http://dx.doi.org/10.4028/www.scientific.net/kem.297-300.1585.

Full text
Abstract:
Horizontal vibration has critical influence upon elevators’ ride quality. Based on the wave theory of one-dimensional string vibration, a horizontal vibration wave model is built to simulate the dynamic performance of a high speed elevator system. Through coordinate transformation, Galerkin’s method is used to discretize the governing partial differential equations into a dumped-mass system, which can be solved effectively with classic methods. Numerical results show that the horizontal vibration behaviors are closely interconnected with the location, velocity and acceleration of elevator cab.
APA, Harvard, Vancouver, ISO, and other styles
26

Prażnowski, Krzysztof, Sebastian Brol, and Andrzej Augustynowicz. "Identification of Static Unbalance Wheel of Passenger Car Carried out on a Road." Solid State Phenomena 214 (February 2014): 48–57. http://dx.doi.org/10.4028/www.scientific.net/ssp.214.48.

Full text
Abstract:
This paper presents a method of identification of non-homogeneity or static unbalance of the structure of a car wheel based on a simple road test. In particular a method the detection of single wheel unbalance is proposed which applies an acceleration sensor fixed on windscreen. It measures accelerations cause by wheel unbalance among other parameters. The location of the sensor is convenient for handling an autonomous device used for diagnostic purposes. Unfortunately, its mounting point is located away from wheels. Moreover, the unbalance forces created by wheels spin are dumped by suspensio
APA, Harvard, Vancouver, ISO, and other styles
27

Nguyen, Quang Duc. "END-OF-LIFE VEHICLES MANAGEMENT AND INITIAL ESTIMATION OF THE MATERIAL FLOW FROM ELV IN VIETNAM." Vietnam Journal of Science and Technology 58, no. 5A (2020): 138. http://dx.doi.org/10.15625/2525-2518/58/5a/15223.

Full text
Abstract:
End-of-life vehicles (ELV) can be considered as a specific scrap source in Vietnam that is out of the Government control. This research is the initial research in Vietnam for the estimation of ELV flow and the determination of material flow from an ELV. For the estimation of ELV in Vietnam, a combination tool using the population balance model, logistic function and Weibull distribution is applied. It is estimated that the owner rate of car in household is quickly increased, and thus, increases the number of car and the ELV. By the 2030, the owner rate in household reach 0.13 unit per househol
APA, Harvard, Vancouver, ISO, and other styles
28

Ma, Chunli, Jie Guo, Yan Kang, et al. "AtPEPTIDE RECEPTOR2 mediates the AtPEPTIDE1-induced cytosolic Ca2+ rise, which is required for the suppression of Glutamine Dumper gene expression in Arabidopsis roots." Journal of Integrative Plant Biology 56, no. 7 (2014): 684–94. http://dx.doi.org/10.1111/jipb.12171.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Gorasiya, Tejas, and Nilkanth Faldu. "Bioconversion of Floral Waste into Biocompost by using Microbial Consortium from Cow Dung." Current Agriculture Research Journal 10, no. 3 (2023): 346–51. http://dx.doi.org/10.12944/carj.10.3.18.

Full text
Abstract:
In the majority of the developing nations like India, the flower waste age happens to a great extent during capacities, loves, services, celebrations, and so on. Debasement of floral waste is an extremely sluggish interaction. Flower squander debasement likewise expands the interest for agro-based items. In India, a large amount of flowers are offered to sacred places, and many flowers are wasted. Abandoned sanctuaries are carried into the sea or dumped in accessible locations in the country, causing extreme environmental pollution and health hazards. Thus the current study was embraced to fos
APA, Harvard, Vancouver, ISO, and other styles
30

Astuti, Arieyanti Dwi. "PEMANFAATAN LIMBAH CAIR PEMINDANGAN IKAN." Jurnal Litbang: Media Informasi Penelitian, Pengembangan dan IPTEK 10, no. 2 (2019): 144–22. http://dx.doi.org/10.33658/jl.v10i2.83.

Full text
Abstract:
ENGLISHThe enhancement number of boiled fish production will always followed by the increase of waste volume, especially wastewater that in the process will be dumped into the environment. Whereas, if it used with technology development varieties, boiled fish wastewater potentially produce new products. This is because the content of the materials in boiled fish wastewater that useful, such as proteins, fats, salts, and others. That’s required an effort that is able to utilizing wastewater boiled fish, as well as to create new products from utilization results of the wastewater. This review ai
APA, Harvard, Vancouver, ISO, and other styles
31

Handayani, G., and G. Masimuja. "MASW (Multichannel of Analysis of Surface Waves) Measurements on Very Dense Fill of Freeport Mining." Journal of Physics: Conference Series 2734, no. 1 (2024): 012016. http://dx.doi.org/10.1088/1742-6596/2734/1/012016.

Full text
Abstract:
Abstract The MASW (Multi-Channel Analysis of Surface Waves) was conducted on fill soil at Tembagapura Freeport Mining. The fill was very dense and is the landfills where people dumped waste disposal like car tire rubber etc. Several attempts were made to make boreholes to collect soil samples and to run SPT (Standard Penetration Test), but they failed. The fill was so dense that the employed drill bits were worn out when penetrating the soil. The MASW team was invited to carry out the measurements and to produce shear wave velocities of the layers, which correspond to SPT Number. The number of
APA, Harvard, Vancouver, ISO, and other styles
32

Irmanto, Irmanto, and Suyata Suyata. "PENGOLAHAN LIMBAH CAIR INDUSTRI TAHU DI DESA KALISARI KECAMATAN CILONGOK DENGAN METODE MULTI SOIL LAYERING." Molekul 4, no. 1 (2009): 21. http://dx.doi.org/10.20884/1.jm.2009.4.1.59.

Full text
Abstract:
Tofu industry is one of the industries which causing pollution on the environment especially water environment. The amount of wastewater-dumped and the content of organic substances could damage the water ecosystem. Multi Soil Layering (MSL) as one of alternative method is used in order to remove the tofu industrial wastewater pollution. MSL is a method of wastewater treatment that enhances the function of soils to purify wastewater.The research aimed to determine optimum loading rate and efficiency of MSL system to remove TSS, BOD and COD. The wastewater on the MSL system is loaded at the loa
APA, Harvard, Vancouver, ISO, and other styles
33

Maharani, Nur Annisa, and Pinjung Nawang Sari. "Penerapan Aquaponic Sebagai Teknologi Tepat Guna Pengolahan Limbah Cair Kolam Ikan di Dusun Kergan, Tirtomulyo, Kretek, Bantul, Yogyakarta." Jurnal Pengabdian kepada Masyarakat (Indonesian Journal of Community Engagement) 1, no. 2 (2016): 172–82. http://dx.doi.org/10.22146/jpkm.10603.

Full text
Abstract:
Kergan sub-village is located in the Tirtomulyo Village, Kretek District, Bantul Regency, on the process into a tourist village. Cultivation of carp and catfish become a favored activity in the village because most of the citizen has carp and catfish ponds for those will be used as priority to become a Tourism Village of Carp. However, the fish pond waste has become a problem. During this time the waste just being dumped into the environment, that cause a contamination on water wells. Therefore, solution to treat this fish pond waste in the village is necessary to be solved by community servic
APA, Harvard, Vancouver, ISO, and other styles
34

Patri, Moh Yogi. "Penentuan Kadar Ammonia (NH3) pada Limbah Cair K-36 dalam Rangka Pengendalian Pencemaran Lingkungan." ALKIMIA : Jurnal Ilmu Kimia dan Terapan 2, no. 2 (2019): 32–36. http://dx.doi.org/10.19109/alkimia.v2i2.2998.

Full text
Abstract:
This research aims to know the levels of ammonia (NH3) in the liquid waste K-36 PT. PUSRI Palembang. PT. PUSRI Palembang was one of five plant fertilizer Indonesia Holding that manages natural gas in such a way that it becomes ammonia and through further processes produce urea fertilizer granules. The process of making urea fertilizer very complex by using high technology. PT PUSRI Palembang is one of the STATE-OWNED company that manufactures and markets products in the form of urea fertilizer. As for the methods used for the determination of the levels of ammonia (NH3) in the liquid waste K-3
APA, Harvard, Vancouver, ISO, and other styles
35

Mulyana, Muhamad Tanto, and Hana Faridah. "ANALISIS PENGATURAN PERTANGGUNGJAWABAN PEMBUANGAN LIMBAH CAIR PT.PINDO DELI III DI KABUPATEN KARAWANG." JURNAL ILMIAH LIVING LAW 14, no. 1 (2022): 50–58. http://dx.doi.org/10.30997/jill.v14i1.5233.

Full text
Abstract:
The rapid global economic growth that refers to the era of modernization will have a major impact on companies that affect sectors of human life. In carrying out their business activities, companies often carry out deviant activities that have an impact on all aspects of life and the environment. Seeing the Karawang Regency area being a fast industrial city, and the way the company's waste is managed is quite an important factor for various types of hazardous and toxic waste. Because the quality standards in accordance with the recommendations are not supposed to be dumped directly into the ri
APA, Harvard, Vancouver, ISO, and other styles
36

Permatasari, Cahyaning Kilang. "Kriteria Prioritas Pemilihan Teknologi Pengolahan Limbah Cair Industri Tempe." JOURNAL OF APPLIED SCIENCE (JAPPS) 3, no. 2 (2021): 015–25. http://dx.doi.org/10.36870/japps.v3i2.173.

Full text
Abstract:
The location of tempe processing adjacent to the settlement causes 
 problems. The resulting liquid waste makes people uncomfortable. This 
 is presumably because the liquid waste has not been managed properly, 
 because it is only dumped into the drainage channel. The majority of 
 tempe industrial entrepreneurs are home industries who are not aware of creating a healthy environment by paying attention to liquid waste 
 processing. There are many studies on technology for the tempe 
 industrial wastewater problem, but each technology has advantages and 
 dis
APA, Harvard, Vancouver, ISO, and other styles
37

Kusuma, Awwalunisa Aliya. "Penggurangan Limbah Minyak Jelantah dengan Pelatihan Pembuatan Sabun Cuci Cair Ekonomis di Kampung Sawah, Bogor." PATRIA 3, no. 1 (2021): 68. http://dx.doi.org/10.24167/patria.v3i1.3110.

Full text
Abstract:
Used Cooking Oil has a negative impact if it is dumped carelessly into the environment and has a positive impact if one of them is used is soap. In this study, corn cobs were used. This soap-making dedication activity aims to provide knowledge to the public regarding the economic potential of used cooking oil waste and corn cobs, skills training for the community regarding the processing of used cooking oil and corn cobs as laundry soap. The method is carried out in two stages: (a) Making soap with used cooking oil and corn cobs. Soap making is done using KOH as a reactant and fragrance to pro
APA, Harvard, Vancouver, ISO, and other styles
38

Kartika, Aulia, Henni Febriawati, Eva Oktavidiati, Nopia Wati, and Wulan Angraini. "ANALISIS PENGOLAHAN LIMBAH CAIR PADA PENGRAJIN BATIK BESUREK DI KELURAHAN BETUNGAN KOTA BENGKULU." Avicenna: Jurnal Ilmiah 19, no. 3 (2025): 168–78. https://doi.org/10.36085/avicenna.v19i3.6703.

Full text
Abstract:
Background: Bengkulu has besurek batik handicrafts with rafflesia motifs. Betungan Village is one of the areas for making besurek batik in Bengkulu City. Besurek batik here is made using the chemical dyes Naptol, Remasol and Indigasol. Batik waste water is dumped in the gutter so it is dangerous for the environment. Method: The type of research is Qualitative Descriptive. The data collection method was interviews with the Head of Bengkulu City DLH, the head of Santi Batik, members of Santi Batik, residents of Betungan Village and documentation. The research location was in Betungan Batik Villa
APA, Harvard, Vancouver, ISO, and other styles
39

Hadinoto, Hadinoto, Eni Suhesti, and Eno Suwarno. "PEMANFAATAN BIJI KARET DAN LIMBAH IKAN PATIN SEBAGAI BAHAN PEMBUATAN PAKAN IKAN, PUPUK ORGANIK CAIR DAN PAKAN UNGGAS." Wahana Forestra: Jurnal Kehutanan 12, no. 1 (2017): 1–16. http://dx.doi.org/10.31849/forestra.v12i1.195.

Full text
Abstract:
Rubber trees planted by people in several districts of Riau province, among them the Kampar regency. Rubber seed that has not valuable feed source can be used for one of them is a main ingredient of fish feed. In addition to rubber seed, Tower Island Village also produces waste Patin fish entrails. The waste generated from the business community to make smoked fish Patin. During this time the waste is dumped in waterways around residences. Problems IbM partners: 1) Partners have the willingness to do busine ss, but do not have the knowledge and skills in the field of production, 2) Partners do
APA, Harvard, Vancouver, ISO, and other styles
40

Nurhayati and Yadi Supriyadi. "TEKNOLOGI MEMBRAN MIKROFILTRASI (MF) UNTUK PEMURNIAN TOTAL NITROGEN DARI SAMPAH CAIR (LEACHATE) DI TPA WANCI MEKAR KERAWANG." JURNAL TECHLINK 8, no. 2 (2024): 33–41. https://doi.org/10.59134/jtnk.v8i2.664.

Full text
Abstract:
Waste processing is currently being at the level of the government, especially solid waste, while liquid waste (leachate) has not been widely processed. Liquid waste is very disturbing to the environment because of the odor from the decomposition process of microorganisms and a little photolysis process. Leachate will cause the environmental carrying capacity to exceed and the impact of this leachate will continue because the community around the TPA location will use the river water that passes through the area to irrigate rice fields and other plants. Thus, it is necessary to conduct researc
APA, Harvard, Vancouver, ISO, and other styles
41

Torres, Pedro, Janis Arents, Hugo Marques, and Paulo Marques. "Bin-Picking Solution for Randomly Placed Automotive Connectors Based on Machine Learning Techniques." Electronics 11, no. 3 (2022): 476. http://dx.doi.org/10.3390/electronics11030476.

Full text
Abstract:
This paper presents the development of a bin-picking solution based on low-cost vision systems for the manipulation of automotive electrical connectors using machine learning techniques. The automotive sector has always been in a state of constant growth and change, which also implies constant challenges in the wire harnesses sector, and the emerging growth of electric cars is proof of this and represents a challenge for the industry. Traditionally, this sector is based on strong human work manufacturing and the need arises to make the digital transition, supported in the context of Industry 4
APA, Harvard, Vancouver, ISO, and other styles
42

Lopes, Álvaro D. O., Helder R. O. Rocha, Marcos W. J. Servare Junior, Renato E. N. Moraes, Jair A. L. Silva, and José L. F. Salles. "Planning an Integrated Stockyard–Port System for Smart Iron Ore Supply Chains via VND Optimization." Sustainability 15, no. 11 (2023): 8970. http://dx.doi.org/10.3390/su15118970.

Full text
Abstract:
Stockyard–port planning is a complex combinatorial problem that has been studied primarily through simulation or optimization techniques. However, due to its classification as non-deterministic polynomial-time hard (NP-hard), the generation of optimal or near-optimal solutions in real time requires optimization techniques based on heuristics or metaheuristics. This paper proposes a deterministic simulation and a meta-heuristic algorithm to address the stockyard–port planning problem, with the aim of reducing the time that ships spend in berths. The proposed algorithm is based on the ore handli
APA, Harvard, Vancouver, ISO, and other styles
43

Kari, A., N. J. Mohamad, and N. Mohd Maidin. "Influence of baking temperature on the extractable polyphenols and nonextractable polyphenols from cashew apple (Anacardium occidentale L.) cookies." Food Research 9, no. 3 (2025): 323–31. https://doi.org/10.26656/fr.2017.9(3).040.

Full text
Abstract:
Cashew apples (Anacardium occidentale L.) are primarily cultivated for their nuts and often have their pseudofruit dumped on the ground. The pseudofruit accounts for 90% of the total fruit, with 85-90% consisting of water. The residue after water removal shows the fruit to have around 20-60% dietary fibre (df), which may have bound polyphenols attached to the fibre network. Decoction at 90°C has been reported to release bound polyphenols and increase the ratio of extractable polyphenols (EPP) in plant material residue. However, the effect may vary depending on the type of fibre in the plant, a
APA, Harvard, Vancouver, ISO, and other styles
44

Fabricant, Carule. "Riding the Waves of (Post)Colonial Migrancy: Are We All Really in the Same Boat?" Diaspora: A Journal of Transnational Studies 7, no. 1 (1998): 25–51. http://dx.doi.org/10.3138/diaspora.7.1.25.

Full text
Abstract:
I would like to begin by juxtaposing two very different pictures of global travel taken from recent articles in the popular media and considering their implications both for contemporary postcolonial theory and for our readings of “third world” fictional texts. In one article from the summer of 1997 (Newton 6-7), the Los Angeles New Times displayed on its cover a slender man in his thirties staring hopelessly out from behind a barred window. The caption read: “No Way Out: Romanian Gavrila Moldovan Risked His Life to Come to America. The INS Promptly Locked Him Up on Terminal Island. Three and
APA, Harvard, Vancouver, ISO, and other styles
45

Sukwika, Tatan, and Said Azmi Muhammad. "Produksi Bersih Pengolahan Limbah Cair Menggunakan Decanter pada PT Aetra Air Jakarta." Jurnal Teknologi Lingkungan 22, no. 2 (2021): 206–14. http://dx.doi.org/10.29122/jtl.v22i2.4583.

Full text
Abstract:
ABSTRACT Clean water process production by PT Aetra Air Jakarta (AAJ) emits a lot of wastewater. All this time, a sludge drying bed is used for its production activities, where the sludge produced is not proportional to the area and length of drying time, so the unsatisfied sludge is eventually dumped into the water body. In line with the need to improve the quality of operational activities, clean water service providers are trying to create zero waste. They are environmentally friendly through the use of a decanter. The research objective was to determine the amount of sludge treated in the
APA, Harvard, Vancouver, ISO, and other styles
46

Ryntathiang, Iadalin, Shajni Krishna GM, Sivasankari Sekar, Archana Behera, Silambarasan Tamil Selvan, and Mukesh Kumar Dharmalingam Jothinathan. "Bioenergy and Valuable Products from Floral Waste - Sustainable Approach." International Research Journal of Multidisciplinary Scope 05, no. 04 (2024): 531–41. http://dx.doi.org/10.47857/irjms.2024.v05i04.01133.

Full text
Abstract:
Flower waste has emerged as a noteworthy issue, especially in the context of India’s growing floriculture sector. According to the Indian floriculture market report, specifically, the floriculture market is growing at a very high Compound Annual Growth Rate (CAGR) of 11%. 4% expected between 2024 and 2032. However, flower waste is still considered as one of the growing issues in the environment but is rarely addressed. Floral remains are among the most common organic wastes that are often dumped in landfills or any water bodies hence polluting the environment and emitting greenhouse gases incl
APA, Harvard, Vancouver, ISO, and other styles
47

Suraya Hani Adnan, Norhayati Abdul Wahab, Ezatul Syazwana Turiman, et al. "Mechanical Properties of Bricks Containing Sago Fine Waste as Cement Replacement Material." Journal of Advanced Research in Applied Mechanics 115, no. 1 (2024): 36–46. http://dx.doi.org/10.37934/aram.115.1.3646.

Full text
Abstract:
Due to the country's expanding population and the resulting growth of the building industry, brick is one of the most crucial materials used in construction projects in Malaysia. Producing large amounts of bricks requires a lot of cement yet this method has environmental consequences due to increasing carbon emissions into the atmosphere. Therefore, this study aims to use partial Sago Fine Waste (SFW) to replace the cement. About 60 tonnes of sago trash are dumped into the closest river every day during the production of sago starch. To protect the environment and contributing to sustainable d
APA, Harvard, Vancouver, ISO, and other styles
48

MANOJ, SHIVA. "ROLE OF SUSTAINABLE PACKAGING PRACTICES IN THE FAST-MOVING CONSUMER GOODS (FMCG) INDUSTRY: THE INDIAN SCENARIO." International Scientific Journal of Engineering and Management 04, no. 03 (2025): 1–9. https://doi.org/10.55041/isjem02454.

Full text
Abstract:
By the next two years, the FMCG market in India is expected to have grown from US$ 110 billion in 2020 to US$ 220 billion at a compound annual growth rate (CAGR) of 14.9 percent. In the coming years, it is projected that the Indian packaged food market will double in size to reach US$70 billion. As more people in urban and rural areas have access to the internet, there is a greater need for FMCG products in India, mostly through e-commerce websites. Maintaining the integrity, safety, and quality of products across supply chains has always depended heavily on packaging. For FMCG companies, post
APA, Harvard, Vancouver, ISO, and other styles
49

Zainab Sabah Rasoul, Jariah Mohamad Juoi, and Bahaa Hussain Al-Abbas. "Mechanical Properties and High Temperature Performance of Sustainable Reactive Powder Concrete Containing Waste Glass." Journal of Advanced Research in Applied Mechanics 112, no. 1 (2023): 149–61. http://dx.doi.org/10.37934/aram.112.1.149161.

Full text
Abstract:
At present, it is a challenge to produce a high performance reactive powder concrete (RPC) from local available materials due to the least costly components of a conventional concrete are eliminated by more expensive elements such as the silica fume and steel fibers. In the other hand, million tons of glass is being dumped every year all over the world. More than 75% of glass composition is basically silica and reported to having a pozzolanic reaction. Thus, glass is potentially suitable material as replacement materials for the RPC mixture. In our work, waste glass powder (WGP) was used to co
APA, Harvard, Vancouver, ISO, and other styles
50

F. Recher, Harry. "Assuming Responsibility." Pacific Conservation Biology 15, no. 3 (2009): 150. http://dx.doi.org/10.1071/pc090150.

Full text
Abstract:
When i was growing up in New York City during the 1940s, people (ordinary people anyway) assumed responsibility for their own actions. That was back when falling on an icy sidewalk meant being careless and not that the City had failed in its duty of care; when you could go fishing in the local park without first climbing a chain link fence designed to stop kids from falling into the water and their parents suing the County for negligence; or, when you could ride a bicycle without a helmet and there were see-saws in the park alongside slippery-dips higher than the shoulders of a five year old.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!