To see the other types of publications on this topic, follow the link: CAR SALON.
Dissertations / Theses on the topic 'CAR SALON'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 47 dissertations / theses for your research on the topic 'CAR SALON.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Артюхова, Н. С., and N. S. Artyukhova. "Развитие автокредитования как сегмента потребительского кредитования в РФ : магистерская диссертация." Master's thesis, б. и, 2020. http://hdl.handle.net/10995/91777.
Full textAbstract:
Структура магистерской диссертации включает в себя введение, три главы, заключение, список использованной литературы. В первой главе работы изучены теоретические основы автокредитования как направления — потребительского кредитования, определены риски автокредитования, присутствующие в банковской деятельности, Во второй главе, исходя из общих теоретических положений, рассмотренных в первой главе, проведен анализ современных тенденций в сфере автокредитования и состояние автокредитного рынка России, а также проведен анализ практики кредитования на примере ООО «Медиа-микс». В третьей главе на основе проведенного анализа выявлены проблемы и перспективы развития рынка автокредитования в России, рассмотрены основные тенденции развития рынка автокредитования. В заключении подводятся итоги проведенного исследования, делаются основные выводы по работе.The structure of the master's thesis includes an introduction, three chapters, conclusion, bibliography. In the first chapter of the work, the theoretical foundations of car lending as a direction - consumer lending are studied, the risks of car lending present in banking are identified.In the second chapter, based on the general theoretical provisions discussed in the first chapter, an analysis of modern trends in the field of car loans and the state of the auto loan market in Russia , as well as an analysis of the lending practice on the example of LLC "Media-mix". In the third chapter, on the basis of the analysis, the problems and prospects of the development of the car lending market in Russia are identified, and the main trends in the development of the car lending market are considered. In the conclusion, the results of the study are summed up, the main conclusions are drawn.
2
Dostálová, Tereza. "Bytový dům ve Svitavách." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227714.
Full textAbstract:
The subject of this diploma thesis is the new apartment house with business premises in the Riegrova street in Svitavy. The apartment house is located on flat land in the built-up area near the town centre. The building does not have a basement and has four floors. On the first floor there are a beauty and massage salon, a newsagent, a shoe shop, a maternal centre, entrances to the residential part and storage spaces belonging to the housing units. On the second, the third and the fourth floors there are housing units of different categories. The car park is situated outside the building. The building is made from constructional system Porotherm, the roof of the building is flat. The facade is designed with an external thermal insulation composite system. Drawings are processed in ArchiCAD 14.
3
Bičkutė, Germina. "Automobilio salono odinė apdaila." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2012. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2012~D_20120702_103801-80857.
Full textAbstract:
Bakalauro darbą sudaro: kūrybinis darbas, teorinis aprašas, pristatomasis video ir verslo planas. Pateikiamas kūrybinis darbas – automobilio sėdynių užvalkalai, pritaikyti Ford Focus Mk I. Sėdynių apmušalai pasiūti iš tamsiai mėlynos ir geltonos spalvų odos ir juodos spalvos veliūro audinio. Po veliūru įsiūtas porolono paminkštinimas, kad sėdėjimas būtų komfortabilesnis. Sėdynių šonai pasiūti iš patvaresnės ir ilgaamžiškesnės medžiagos – odos. Teorinėje dalyje aprašomos odos panaudojimo transporto priemonėse ištakos: arklių kinkymo amunicija, odos panaudojimas karietose, pirmųjų automobilių interjeras bei pirmųjų motociklų sėdynės. Taip pat apžvelgiamos Lietuvos ir užsienio įmonės, užsiimančios transporto priemonių salono „tiuningu“ bei trumpai paminėta konkretesnė jų veikla, naudojamos medžiagos, kontaktai ir kita informacija. Tokių įmonių veikla apima ne tik automobilių ir motociklų apdailą. Jos gali atnaujinti ir lėktuvus, laivus, kemperius, autobusus, karietas ir dauguma kitų transporto priemonių. Įmonių veikloje aptinkamas atnaujinimas beveik visų transporto priemonių salono detalių: sėdynių, panelių, durelių, pavarų svirties, vairo, grindų ir lubų.Undergraduate work includes: creative work, a theoretical description, video and business plan. A creative work – car seat covers, customize Ford Focus Mk I. Seat upholstery made of dark blue and yellow skin and black velour. Under a sewn velour foam pads that are more comfortable sitting. Seat sides are made from durable material – leather. The theoretical part describes the use of skin-vehicle Origins: Sled horse ammunition, the use of skin carriage, the first car and the interior of the first motorcycle seat. It also provides an overview of the Lithuanian and foreign companies engaged in the vehicle interior "tuning" and a brief mention of their specific activities, materials used, contacts and other information. These companies include not only cars, motorcycles and finish. They can update and airplanes, boats, campers, buses, coaches and most other vehicles. Business activity is detected updating almost any vehicle interior components: seats, panels, door panels, gear lever, steering wheel, floor and ceilings.
4
Winbourne, Janet L. "Taking care of salmon, significance, sharing, and stewardship in a Nuxalk food fishery." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/MQ49469.pdf.
Full text
5
Dyson, Gerald P. "Contexts for pastoral care : Anglo-Saxon priests and priestly books, c. 900-1100." Thesis, University of York, 2016. http://etheses.whiterose.ac.uk/13367/.
Full textAbstract:
This thesis is an examination and analysis of the books needed by and available to Anglo-Saxon priests for the provision of pastoral care in the tenth and eleventh centuries. Anglo-Saxon priests are a group that has not previously been studied as such due to the scattered and difficult nature of the evidence. By synthesizing previous scholarly work on the secular clergy, pastoral care, and priests’ books, this thesis aims to demonstrate how priestly manuscripts can be used to inform our understanding of the practice of pastoral care in Anglo-Saxon England. In the first section of this thesis (Chapters 2–4), I will discuss the context of priestly ministry in England in the tenth and eleventh centuries before arguing that the availability of a certain set of pastoral texts prescribed for priests by early medieval bishops was vital to the provision of pastoral care. Additionally, I assert that Anglo-Saxon priests in general had access to the necessary books through means such as episcopal provision and aristocratic patronage and were sufficiently literate to use these texts. The second section (Chapters 5–7) is divided according to different types of priestly texts and through both documentary evidence and case studies of specific manuscripts, I contend that the analysis of individual priests’ books clarifies our view of pastoral provision and that these books are under-utilized resources in scholars’ attempts to better understand contemporary pastoral care. Furthermore, this thesis will expand the corpus of manuscripts thought to have been used by Anglo-Saxon priests. In particular, I will argue that London, British Library, Cotton Vespasian D. XV and Warsaw, Biblioteka Narodowa, I. 3311 (the Warsaw Lectionary) are best understood as Anglo-Saxon priestly manuscripts.
6
Bohan, Chara Haeussler. "Go to the sources : Lucy Maynard Salmon and the teaching of history /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.
Full text
7
Ganze, Ronald J. "Conceptions of the self in Augustine, King Alfred, and Anglo-Saxon England /." view abstract or download file of text, 2004. http://wwwlib.umi.com/cr/uoregon/fullcit?p3153785.
Full textAbstract:
Thesis (Ph. D.)--University of Oregon, 2004.Typescript. Includes vita and abstract. Includes bibliographical references (leaves 192-211). Also available for download via the World Wide Web; free to University of Oregon users.
8
Oness, Chad. "Not grace exactly : an unanxious search for contemporary and Anglo-Saxon poetic influences /." free to MU campus, to others for purchase, 1998. http://wwwlib.umi.com/cr/mo/fullcit?p9904863.
Full text
9
Riedel, Christopher Tolin. "Monastic Reform and Lay Religion in Æthelwold's Winchester." Thesis, Boston College, 2015. http://hdl.handle.net/2345/bc-ir:104635.
Full textAbstract:
Thesis advisor: Robin FlemingBishop Æthelwold of Winchester (d. 984) was a reformer of Anglo-Saxon monasticism, but he was also deeply concerned with the religion of ordinary English laypeople. Whether in his promulgation of the cult of saints, vast elaboration of the liturgy, or extensive rebuilding of Winchester’s churches, Æthelwold demonstrated an interest in the lay religion that has been consistently ignored by modern scholars who fixate on his monastic zeal. This concern for the laity is natural in the context of Æthelwold’s own interpretation of the English past, as his goal of an all-monastic English Church necessitated a pastoral role for his reformed monks rather than their strict seclusion from the world. Such a goal was possible because Æthelwold initiated his reform program in the mid tenth century, when corporate religious life still provided the bulk of pastoral care in Winchester and the rest of southwest England, and the organized parish system was only a dim possibility as small local churches began to appear haphazardly in the north and east of the country. Æthelwold’s reforms were therefore very different from similar ones taking place on the continent or even in the sees of his fellow English reformers, and he attempted to recreate an imagined English past very unlike the Church that would eventually result a century later. The influence of his students, however, especially Wulfstan Cantor and the prolific Ælfric of Eynsham, shows that Æthelwold’s unusual interest in lay religion had far reaching consequences for the medieval English Church
Thesis (PhD) — Boston College, 2015
Submitted to: Boston College. Graduate School of Arts and Sciences
Discipline: History
10
Mosweunyane, Lentswe Donald. "Records management practices of hair salons in Dr. Ruth Segomotsi Mompati district municipality." Thesis, Bloemfontein : Central University of Technology, Free State, 2013. http://hdl.handle.net/11462/193.
Full textAbstract:
Thesis (M. Tech. (Business administration)) - Central University of technology, Free State, 2013This study was necessitated by the fact that being labour intensive, hair salons provide partial solution to South Africa’s high unemployment, poverty and inequality problems hence need to be supported so that they can grow and continue performing their expected labour absorption role. Dr. Ruth Segomotsi Mompati district municipality in the North West Province of South Africa is a socio economically depressed area that depends on hair salons for employment. The prosperity of hair salons is therefore critical to the well-being of the inhabitants of the area. Unfortunately, proliferation of hair salon business in Dr. Ruth Segomotsi Mompati district municipality since the dawn of democracy in South Africa has created fierce competition for customers leading to lack of profitability and hair salons failures. While many reasons can account for business failure in the face of intense competitive environment, there is consensus from the literature that in the current information economy, appropriate management of records allows for quick access to reliable information and this is key to business success. In fact, resource-based view (RBV) of the firm suggests that a company’s quick access to reliable information that is contained in its resources allows that firm to gain sustainable competitive advantage that allows for superior performance. This calls for proper management of a company’s records. Accordingly, it is crucial that managers/owners of hair salons recognise the importance of good records management in their businesses in order to continuously have timely access to accurate information. Unfortunately, the researcher has informally observed a disturbing trend among some hair salons in Dr Ruth Mompati local municipality that flies in the face of what can be termed good records management. An informal visit to some of the salons in the region revealed an apparent laxity with which transactions were recorded. Worst still, Informal conversations with a few hair salons operators seem to suggests that records management may be a problem among hair salons as some even see it as more a liability than asset. This suggests that hair salons in Dr. Ruth Segomotsi Mompati district municipality might not be taking records management seriously. The question then is, how wide spread is this negative attitude towards records keeping in Dr Ruth Mompati local municipality? Or could this be the general sentiment in the hair salon industry as a whole? The purpose of this study was to assess the status of records management among hair salons in Dr. Ruth Segomotsi Mompati District Municipality. The key finding of this study is that most hair salons in Dr. Ruth Segomotsi Mompati district municipality do practice records management to a certain extent. However, there are certain records that hair salons in the area regard as of no importance and therefore are neglected. The study also revealed that those hair salons that engage in good records management outperform those that do not. The study further revealed that most of the salons keep paper records although they would prefer electronic format. Lack of access to computers was cited as the greatest problem in keeping electronic records. Details of the study including findings, conclusions and recommendations are presented and discussed in the main report.
11
Bohling, Solange N. "Death, disability, and diversity: An investigation of physical impairment and differential mortuary treatment in Anglo-Saxon England." Thesis, University of Bradford, 2020. http://hdl.handle.net/10454/18324.
Full textAbstract:
Until recently, individuals with physical impairment have been overlooked
within the field of archaeology due to the controversy surrounding the topics of
disability and care in the past. The current research adds to the growing body of
archaeological disability studies with an exploration of physical impairment and
the possibility of disability-related care in Anglo-Saxon England (5th-11th centuries
AD), utilising palaeopathological, funerary, and documentary analyses.
Palaeopathological analysis of 86 individuals with physical impairment
from 19 Anglo-Saxon cemetery populations (nine early, five middle, and five later)
was performed, and the possibility of disability-related care was explored for
several individuals. The mortuary treatment data (e.g. grave orientation, body
position, grave good inclusion) was gathered for the entire burial population at
each site (N=3,646), and the funerary treatment of the individuals with and
without physical impairment was compared statistically and qualitatively, both
within and between the Anglo-Saxon periods.
No obvious mortuary differentiation of individuals with physical impairment
was observed, although several patterns were noted. In three early Anglo-Saxon
cemeteries, spatial association between individuals with physical impairment,
non-adults, and females was observed. Early Anglo-Saxon individuals with
physical impairment were more frequently buried in marginal locations, and two
such individuals were buried in isolation. In the middle and later Anglo-Saxon
periods, the funerary treatment of individuals with physical impairment became
less variable, they were less frequently buried in marginal locations, and at three
middle Anglo-Saxon cemeteries, they were buried in association with socially
significant features in the cemetery landscape. The provision of care to ensure
survival was not necessary for a majority of the individuals with physical impairment, but several individuals (lower limb paralysis, mental impairment) may have received regular, long-term care.
This research proposes that the decreasing variability of mortuary treatment of individuals with physical impairment observed throughout the Anglo-Saxon period suggests that more variable attitudes about disability existed both within and between early Anglo-Saxon communities, while the political, social,
and religious unification starting in the middle Anglo-Saxon period may have led to the development of more standardised perceptions of disability in later Anglo-Saxon England.
12
Brothers, Daniel Stephen. "New insights into North America-Pacific plate boundary deformation from Lake Tahoe, Salton Sea and Southern Baja California." Diss., [La Jolla] : University of California, San Diego, 2009. http://wwwlib.umi.com/cr/ucsd/fullcit?p3379095.
Full textAbstract:
Thesis (Ph. D.)--University of California, San Diego, 2009.Title from first page of PDF file (viewed November 17, 2009). Available via ProQuest Digital Dissertations. Vita. Includes bibliographical references.
13
Berger, Maik. "6. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 6. Anwendertreffens am 01. April 2014 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2014. https://monarch.qucosa.de/id/qucosa%3A20036.
Full text
14
Berger, Maik. "8. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 8. Anwendertreffens am 22. März 2016 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2016. https://monarch.qucosa.de/id/qucosa%3A20485.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert.
Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht.
Das 8. Anwendertreffen SAXSIM fand am 22.03.2016 an der TU Chemnitz statt.The Chair of Assembly and Handling Technology, which belongs to the Faculty of Mechanical Engineering, has organized the annual simulation user meeting SAXSIM since 2009. Select contributions will be published in conference proceedings. The 8th SAXSIM user meeting took place at Technische Universität Chemnitz on March 22, 2016.
15
Berger, Maik. "SAXON SIMULATION MEETING : Präsentationen und Vorträge des 1. Anwendertreffens am 28. April 2009 an der TU Chemnitz." Technische Universität Chemnitz, 2009. https://monarch.qucosa.de/id/qucosa%3A19122.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 regelmäßig jedes Jahr im Frühjahr ein Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 1. Anwendertreffen SAXSIM fand am 28.04.2009 an der TU Chemnitz statt.
Parallel zur Onlineausgabe ist eine CD-ROM der Tagungsbeiträge erschienen. Sie enthält die präsentierten Vorträge zu unterschiedlichen Themenstellungen aus den Bereichen CAD, Simulation und Berechnung.
Von Experten aus Wirtschaft und Wissenschaft wurden neben Hinweisen zu neuen Simulationsfeatures auch Einblicke und Anregungen für eine effiziente Bauteilberechnung gegeben, die Simulation komplexer Anlagen gezeigt und ingenieurtechnisch - mathematische Lösungsansätze erörtert.
16
Berger, Maik. "7. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 7. Anwendertreffens am 31. März 2015 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2015. https://monarch.qucosa.de/id/qucosa%3A20267.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert.
Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht.
Das 7. Anwendertreffen SAXSIM fand am 31.03.2015 an der TU Chemnitz statt.
17
Berger, Maik. "10. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 10. Anwendertreffens am 22. März 2018 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2018. https://monarch.qucosa.de/id/qucosa%3A21380.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 10. Anwendertreffen SAXSIM fand am 22.03.2018 an der TU Chemnitz statt.The Chair of Assembly and Handling Technology, which belongs to the Faculty of Mechanical Engineering, has organized the annual simulation user meeting SAXSIM since 2009. Select contributions will be published in conference proceedings. The 10th SAXSIM user meeting took place at Technische Universität Chemnitz on March 22, 2018.
18
Berger, Maik. "11. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 11. Anwendertreffens am 26. März 2019 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2019. https://monarch.qucosa.de/id/qucosa%3A34090.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 11. Anwendertreffen SAXSIM fand am 26.03.2019 an der TU Chemnitz statt.The Chair of Assembly and Handling Technology, which belongs to the Faculty of Mechanical Engineering, has organized the annual simulation user meeting SAXSIM since 2009. Select contributions will be published in conference proceedings. The 11th SAXSIM user meeting took place at Technische Universität Chemnitz on March 26, 2019.
19
Juniku, Majlinda. "När bok blir film… : En jämförande analys av boken och filmen Catch me if you can." Thesis, Uppsala University, Media and Communication, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9165.
Full textAbstract:
Abstract
Title: When book becomes film... – a comparative analysis of the book and film Catch me if you can (När bok blir till film…En jämförande analys av boken och filmen Catch me if you can)
Number of pages: 46
Author: Majlinda Juniku
Tutor: Amelie Hössjer
Course: Media and Communication Studies C
Period: Autumn term 2007
University: Division of Media and Communication, Department of Information Science, Uppsala University.
Purpose/Aim: To study what model of dramaturgy belongs to the film Catch me if you can and to see what has been crossed out, altered and added from the book so the narrative will fit this model.
Material/Method: The film Catch me if you can and the book with the same name has been used to analyze the differences between them. I have divided the differences into three categories: Crossed out, Altered and Added. In the analysis section these have been presented in each section of the film.
Main results: Catch me if you can is definetly a film made with the design of the Anglosaxon model, mostly because of its timestructure and that it portrays an action and not just a condition which is normal in the epic-lyric model. Big parts of the story have been crossed out, altered and added to make the film more acceptabel to the audience. Most of the changeshad been done to make the story shorter to fit the timeframe of a film. Events had been joinedtogether to save time but not miss anything. A character, Hanratty, has been reinforced to create a cat-and-mouse story and add excitement to the film. Other changes have been made to make the main character seem more likeable to the audience.
Keywords: book, film, dramaturgy, Catch me if you can, anglo-saxon, epic-lyric
20
Berger, Maik. "9. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 9. Anwendertreffens am 28. März 2017 an der Technischen Universität Chemnitz." Universitätsverlag der Technischen Universität Chemnitz, 2017. https://monarch.qucosa.de/id/qucosa%3A20708.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert.
Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht.
Das 9. Anwendertreffen SAXSIM fand am 28.03.2017 an der TU Chemnitz statt.:- Multiphysikalische Systemsimulation mit SimulationX / Adam Burkhard
- Modellierung & Simulation des Plasmaschweißens zur Entwicklung innovativer Schweißbrenner / Dr.-Ing. habil. Khaled Alaluss
- Dynamischer Partikelbruch: Modelldefinition, Kalibrierung und Anwendung / Dr.-Ing. Luca Benvenuti
- Konstruktionsbegleitende Toleranzsimulation mit CETOL 6 σ unter Verwendung der GPS-Strategie DIN EN ISO 14638 und DIN EN ISO 8015 / Dipl.-Ing. (FH) Christoph Bruns
- PTC CREO SIMULATE ENGINE UPDATES / Dr. Arun Chavan
- CREO SIMULATE : ROADMAP / Jose Coronado
- Simulationsbasierte Entwicklung und Optimierung von Werkzeugmaschinen / Dipl.-Ing. Uwe Eiselt
- Validierung des Kontaktmoduls der Freeware Z88Aurora anhand analytischer Beispiele und kommerzieller FE-Systeme / Christian Glenk M.Sc.
- Mehrkörpersimulation eines ebenen Koppelgetriebes mittels Matlab/ADAMS-Co-Simulation / Dipl.-Ing. Christian Gollee
- Numerische Auslegung des Mehrlagenschweißens als additives Fertigungsverfahren / Dr.-Ing. Marcel Graf
- Berechnung und Simulation von Kurvenschrittgetrieben / Dr.-Ing. Andreas Heine
- Parameterstudien und Co-Simulation ebener Koppelgetriebe / Stefan Heinrich M.Sc.
- Erfassung, Simulation und Weiterverarbeitung menschlicher Bewegungen mit DYNAMICUS / Dipl. -Math. Heike Hermsdorf
- Linear Dynamic System Analyses with Creo Simulate / Dr.-Ing. Roland Jakel
- Strömungssimulation zur Optimierung von Flussfeldern in PEM-Brennstoffzellen / Philipp Jendras M.Sc.
- Konvergenz eines plastischen Multiphysics-Kontaktes in der Pressschweißsimulation - Herausforderungen und Lösungsansätze / Jonny Kaars M.Eng.
- Kurvenabgleich zur Bestimmung eines Systemverhalten und von Materialparametern / Dipl.-Ing. Rene Kallmeyer
- Die kinematische und statische Analyse eines Biglide-Getriebes mit Hilfe der Programme Mathcad und GeoGebra / Dr.-Ing. Hanfried Kerle
- Möglichkeiten der TexMind Software für Generierung von textilen Strukturen für FEM Simulationen und CAD Anwendungen / Prof. Dr. Yordan Kyosev
- Prozesssimulation einer Rotorflechtmaschine nach „Horn“ zur Ermittlung der Flechtfadenspannung / Robert Laue M.Sc. ; Dr.-Ing. Daniel Denninger
- Bruch einer Königswelle einer 6300 t Presse / Prof. Dr-Ing. Uwe Mahn
- Strukturzuverlässigkeit durch Frequenzganganalyse mit Finite-Elemente-Methode im Rahmen des Projektes DRESDYN / Dipl.-Ing. M.Eng. Anton Melnikov
- Systemübergreifender Simulationsansatz zur Auslegung, Fertigung und Qualitätssicherung am Beispiel einer Bogenverzahnung / Dipl.-Ing. Jürgen Merz
- Integrative Prozess- und Bauteilsimulation für kurzfaserverstärkte Spritzgießbauteile / Dr.-Ing. Sascha Müller
- Computergestützte Simulationsschnittstelle - Optimierte Systementwicklung / Dipl.-Ing. Sam Nezhat
- Formatabhängige hochdynamische Bewegungen mit Servoantrieben / Dipl.-Ing. Dipl.-Inform. Rainer Nolte
- Integration der Diskrete Elemente Methode in die domänen-übergreifende Systemsimulation / Dipl.-Ing. Christian Richter
- Mehrkörpermodellierung und Validierung einer 3 MW Windturbine / Andreas Schulze M. Sc.
- Vergleich von Stützstrukturen für die additive Fertigung: Creo Parametric/Simulate 4.0 & ProTOpCI / Dipl.-Ing. (FH) Urs Simmler
- MFBD-Simulation des Nadeleindringens in ein Gewebephantom am Beispiel der Stanzbiopsie / Thorsten Speicher M.Eng. ; Katharina Hauschild M.Sc.
- ANSYS AIM: Der Konzeptsimulator für alle / Dipl.-Ing. Marc Vidal
- Neue Schweißfunktionalität in Creo 4 mit den daraus entstehenden Vorteilen zur Simulation / Axel Waidmann
- Entwicklung eines zwangläufigen Schneid- und Fixiersystems für den Einsatz in einem Tapelegekopf / Dipl.-Ing. Rainer WallaschThe Chair of Assembly and Handling Technology, which belongs to the Faculty of Mechanical Engineering, has organized the annual simulation user meeting SAXSIM since 2009. Select contributions will be published in conference proceedings. The 9th SAXSIM user meeting took place at Technische Universität Chemnitz on March 28, 2017.:- Multiphysikalische Systemsimulation mit SimulationX / Adam Burkhard - Modellierung & Simulation des Plasmaschweißens zur Entwicklung innovativer Schweißbrenner / Dr.-Ing. habil. Khaled Alaluss - Dynamischer Partikelbruch: Modelldefinition, Kalibrierung und Anwendung / Dr.-Ing. Luca Benvenuti - Konstruktionsbegleitende Toleranzsimulation mit CETOL 6 σ unter Verwendung der GPS-Strategie DIN EN ISO 14638 und DIN EN ISO 8015 / Dipl.-Ing. (FH) Christoph Bruns - PTC CREO SIMULATE ENGINE UPDATES / Dr. Arun Chavan - CREO SIMULATE : ROADMAP / Jose Coronado - Simulationsbasierte Entwicklung und Optimierung von Werkzeugmaschinen / Dipl.-Ing. Uwe Eiselt - Validierung des Kontaktmoduls der Freeware Z88Aurora anhand analytischer Beispiele und kommerzieller FE-Systeme / Christian Glenk M.Sc. - Mehrkörpersimulation eines ebenen Koppelgetriebes mittels Matlab/ADAMS-Co-Simulation / Dipl.-Ing. Christian Gollee - Numerische Auslegung des Mehrlagenschweißens als additives Fertigungsverfahren / Dr.-Ing. Marcel Graf - Berechnung und Simulation von Kurvenschrittgetrieben / Dr.-Ing. Andreas Heine - Parameterstudien und Co-Simulation ebener Koppelgetriebe / Stefan Heinrich M.Sc. - Erfassung, Simulation und Weiterverarbeitung menschlicher Bewegungen mit DYNAMICUS / Dipl. -Math. Heike Hermsdorf - Linear Dynamic System Analyses with Creo Simulate / Dr.-Ing. Roland Jakel - Strömungssimulation zur Optimierung von Flussfeldern in PEM-Brennstoffzellen / Philipp Jendras M.Sc. - Konvergenz eines plastischen Multiphysics-Kontaktes in der Pressschweißsimulation - Herausforderungen und Lösungsansätze / Jonny Kaars M.Eng. - Kurvenabgleich zur Bestimmung eines Systemverhalten und von Materialparametern / Dipl.-Ing. Rene Kallmeyer - Die kinematische und statische Analyse eines Biglide-Getriebes mit Hilfe der Programme Mathcad und GeoGebra / Dr.-Ing. Hanfried Kerle - Möglichkeiten der TexMind Software für Generierung von textilen Strukturen für FEM Simulationen und CAD Anwendungen / Prof. Dr. Yordan Kyosev - Prozesssimulation einer Rotorflechtmaschine nach „Horn“ zur Ermittlung der Flechtfadenspannung / Robert Laue M.Sc. ; Dr.-Ing. Daniel Denninger - Bruch einer Königswelle einer 6300 t Presse / Prof. Dr-Ing. Uwe Mahn - Strukturzuverlässigkeit durch Frequenzganganalyse mit Finite-Elemente-Methode im Rahmen des Projektes DRESDYN / Dipl.-Ing. M.Eng. Anton Melnikov - Systemübergreifender Simulationsansatz zur Auslegung, Fertigung und Qualitätssicherung am Beispiel einer Bogenverzahnung / Dipl.-Ing. Jürgen Merz - Integrative Prozess- und Bauteilsimulation für kurzfaserverstärkte Spritzgießbauteile / Dr.-Ing. Sascha Müller - Computergestützte Simulationsschnittstelle - Optimierte Systementwicklung / Dipl.-Ing. Sam Nezhat - Formatabhängige hochdynamische Bewegungen mit Servoantrieben / Dipl.-Ing. Dipl.-Inform. Rainer Nolte - Integration der Diskrete Elemente Methode in die domänen-übergreifende Systemsimulation / Dipl.-Ing. Christian Richter - Mehrkörpermodellierung und Validierung einer 3 MW Windturbine / Andreas Schulze M. Sc. - Vergleich von Stützstrukturen für die additive Fertigung: Creo Parametric/Simulate 4.0 & ProTOpCI / Dipl.-Ing. (FH) Urs Simmler - MFBD-Simulation des Nadeleindringens in ein Gewebephantom am Beispiel der Stanzbiopsie / Thorsten Speicher M.Eng. ; Katharina Hauschild M.Sc. - ANSYS AIM: Der Konzeptsimulator für alle / Dipl.-Ing. Marc Vidal - Neue Schweißfunktionalität in Creo 4 mit den daraus entstehenden Vorteilen zur Simulation / Axel Waidmann - Entwicklung eines zwangläufigen Schneid- und Fixiersystems für den Einsatz in einem Tapelegekopf / Dipl.-Ing. Rainer Wallasch
21
Berger, Maik. "4. SAXON SIMULATION MEETING and Mathcad-Workshop : Präsentationen und Vorträge des 4. Anwendertreffens und des Mathcad-Workshops am 17.04.2012 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2012. https://monarch.qucosa.de/id/qucosa%3A19683.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 4. Anwendertreffen SAXSIM fand am 17.04.2012 an der TU Chemnitz statt. Zum dritten Mal wurde diese Veranstaltung durch einen Mathcad Workshop am 16.04.2012 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
22
Berger, Maik, and Roland Jakel. "5. SAXON SIMULATION MEETING and Mathcad-Workshop : Präsentationen und Vorträge des 5. Anwendertreffens und des Mathcad-Workshops am 22. und 23. April 2013 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2013. https://monarch.qucosa.de/id/qucosa%3A19906.
Full textAbstract:
Das 5. Anwendertreffen SAXSIM fand am 23.04.2013 an der TU Chemnitz statt.
Zum vierten Mal wurde diese Veranstaltung durch einen Mathcad Workshop am 22.04.2013 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
23
Ghorbel, Mouna. "Régulation de TMKP1, une MAP Kinase Phosphatase de blé, par la calmoduline et des protéines 14-3-3s et analyse de sa contribution dans la réponse des plantes aux stress de l'environnement." Thesis, Toulouse 3, 2015. http://www.theses.fr/2015TOU30123.
Full textAbstract:
Les plantes dans leur milieu naturel, sont constamment soumises à de multiples contraintes environnementales de nature biotique ou abiotique qui sont à l'origine de nombreuses pertes de rendement. Afin de répondre à ces stress, les plantes mettent en place des réponses adaptées qui reposent sur l'activation de voies de signalisations. L'une des voies importantes est celle impliquant la phosphorylation des protéines par les Mitogen Activated Protein Kinase (MAPKs). La régulation de l'activité des MAPKs est indispensable et dépend en partie de protéines phosphatases telles que les MAPK Phosphatases (MKPs). Ce travail a consisté à étudier les mécanismes de régulation de l'activité phosphatase de TMKP1, la seule MKP connue de blé dur, par les calmodulines et les protéines 14-3-3. Dans un premier temps, nous avons montré que l'activité phosphatase de TMKP1 est stimulée en présence des ions K+, Li+, Mg 2+ et surtout par le Mn2+. Des expériences de GST pull dawn ont permis de mettre en évidence une interaction, calcium dépendante, entre TMKP1 et la calmoduline (CaM) et nous avons démontré que l'activité de TMKP1 est inhibée par le complexe CaM/Ca2+. En revanche, ce même complexe stimule l'activité de TMKP1 en présence des ions Mn 2+. Ce mode de régulation d'une MKP par CaM/Ca2+ dépendant des ions Mo2+ est décrit ici pour la première fois. Dans un second temps, la présence au niveau de la séquence de TMKP1 d'un domaine de liaison aux protéines 14-3-3s, nous a incité à mener des essais d'immunoprécipitation à l'issue desquelles nous avons montré que TMKP1 pourrait interagir avec les 14-3-3s chez le Blé et que celles-ci stimulent l'activité phosphatase de TMKP1 in vitro. Enfin, l'implication de TMKP1 dans la réponse des plantes aux stress biotiques et abiotiques a été évaluée. Les tests de gennination ont révélé que la sur-expression de TMKP1 chez Arabidopsis permet une meilleure tolérance à la salinité. Ces mêmes plantes semblent également être plus résistantes à une infection bactérienne causée par Pseudomonas syringae que des plantes sauvages. Ces données suggèrent que TMKP1 agirait comme régulateur positif de la réponse d'Arabidopsis au stress salin et à l'infection P. syringae. L'ensemble des résultats obtenus ici a permis de dévoiler de nouvelles propriétés jamais décrites chez une MKP végétale et offre une nouvelle vision sur le rôle de ces phosphatases dans le contrôle des voies de signalisations MAPKs impliquées dans la réponse des plantes aux stress de l'environnementDue to their sessile lifestyle, plants are constantly subjected to a variety of biotic and abiotic stresses causing tremendous yield losses. To survive under these conditions, plants have evolved different sigualing pathways allowing efficient stress responses. The Mitogen Activated Protein Kinase (MAPKs) are key sigual transduction molecules, which respond to varions external stimuli. However, the activity of MAPKs has to be strictly regulated by protein phosphatase such as MAPK Phosphatase (MKPs). ln the present study we describe the regulation ofTMKPI, a wheat MKP, by Calmodulins (CaM) and 14-3-3 proteins. We fust showed that phosphatase activity oTMKP1 is stimulated by K\ Li\ Mg2+ and especially by Mo2+. Using GST pull dawn assays, we demonstrated that TMKP1 binds to CaM in a Ca2+-dependent manner. Moreover, the CaM/Ca2+ complex inhibits the catalytic activity of TMKP1 in a CaM-dose dependent marmer. However, in the presence of Mo2+, this activity is enhanced by CaM/Ca2+ complex. Such effects were not reported so far, and raise a possible role for CaM and Mo 2+ in the regulation of plant MKPs during cellular response to extemal siguals. Moreover, a fine sequence analysis ofTMKPl revealed the presence of a conserved 14-3-3 mode 1 binding site. This finding incited us to perfonn co-immunoprecipitation assays on wheat protein extracts through which we provide proof-of-concept evidence for interaction of TMKP1 with 14-3-3 proteins. Interestingly, the phosphatase activity of TMKP1 was shawn to be enhanced by several plant and yeast 14-3-3 isoforms. Finally, the involvement of TMKP1 in plant stress responses was evaluated. Our data showed that the overexpression of TMKP1 in Arabidopsis resulted in a higher tolerance to salt stresses and to bacterial infection caused by P. syringae. Such findings suggest thal TMKP1 may act as a positive regulator of Arabidopsis responses to salt stresses and P. syringae infection. All together, our results provide novel functional properties for plant MKPs, and should add new knowledge to our understanding of the raie of these phosphatases in the control of MAPK signaling pathways controlling plant responses to various environmental stresses
24
Berger, Maik. "2. SAXON SIMULATION MEETING und Mathcad Workshop : Präsentationen und Vorträge des 2. Anwendertreffens und des Mathcad-Workshops am 26. und 27. April 2010 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2010. https://monarch.qucosa.de/id/qucosa%3A18258.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 2. Anwendertreffen SAXSIM fand am 27.04.2010 an der TU Chemnitz statt. Erstmals wurde diese Veranstaltung durch einen Mathcad Workshop am 26.04.2010 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
25
Berger, Maik. "3. SAXON SIMULATION MEETING and Mathcad-Workshop : Präsentationen und Vorträge des 3. Anwendertreffens und des Mathcad-Workshops am 18. und 19. April 2011 an der Technischen Universität Chemnitz." Technische Universität Chemnitz, 2011. https://monarch.qucosa.de/id/qucosa%3A19505.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert.
Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 3. Anwendertreffen SAXSIM fand am 19.04.2011 an der TU Chemnitz statt. Zum zweiten Mal wurde diese Veranstaltung durch einen Mathcad Workshop am 18.04.2011 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
26
Ulrich, Kristina. "Molecular epidemiological study on Infectious Pancreatic Necrosis Virus isolates from aquafarms in Scotland over three decades." Thesis, University of Stirling, 2018. http://hdl.handle.net/1893/28340.
Full textAbstract:
Introduction: RNA viruses are economically important pathogens of fish, and among these viruses, infectious pancreatic necrosis virus (IPNV) is of particular concern for the aquaculture industry, especially for farmed rainbow trout (Oncorhynchus mykiss) and Atlantic salmon (Salmo salar). This non-enveloped aquatic virus, which was first isolated in the UK in 1971, belongs to the family of Birnaviridae and has a bi-segmented dsRNA genome of about 6kb. IPNV is classified in 6 genogroups with correspondence to 10 known serotypes and an additional proposed genogroup of marine aquabirnaviruses (MABV). IPNV causes high mortality in fry and a reduced mortality in adult fish, respectively. Fish, which survive, can become carriers and this can lead to a clinical outbreak by releasing infective material into water or by vertical transmission via oocytes, milt and seminal fluids. Methods: This project aimed at determining the phylogeny and genomic changes of IPNV in Scotland by whole genome sequence analysis of IPNV isolates (diagnostic TCID50 supernatants) spanning 3 decades since 1982, using next generation sequencing technology. Viral RNA of IPNV culture supernatant (CHSE-214 and TO cell culture) was processed for next generation sequencing on an Illumina MiSeq platform. Library preparation was performed using the Nextera XT DNA Library Kit, prior to sequencing according to the manufacturer's MiSeq Reagent Kit v3 (150cycles) protocol. To optimize whole genome next generation sequencing for IPNV, we compared two RNA processing protocols, the Glasgow (GLAP) and the Goettingen protocol (GOEP) with focus on missing terminal nucleotides after a de novo genome assembly. Sequences were used to determine the phylogeny and selection pressure on the genome as well as a possible virus-host adaptation. Results: The results showed that both protocols were able to give full length genomes as well as genomes with missing terminal nucleotides. The phylogenetic analysis of 57 sequenced IPVN isolates shows that 78.95 % of the isolates group within genogroup V, which includes serogroup Sp and 5.26 % within genogroup I which includes serogroup Ja. Segment A of 15.79 % of the isolate grouped within genogroup III, which includes serotype Ca1 and Te but only 7.02 % of the segment B isolates grouped in the genogroup III. The remaining 8.77 % of segment B groups within genogroup II, containing the Ab serotype. Previous research has shown that residue substitutions at positions 217 and 221 in the major capsid protein VP2 have an impact on the virulence of the virus, leading to different virulence types: virulent (T217, A221), low virulence (P217, A221), avirulent (T217, T221) and persistent (P217, T221). Whole genome sequence results show that 58.93 % of the sequenced isolates belong to the persistent, 32.14 % to the low virulent type, only one isolate was of a virulent type and 7.15 % had not virulence assigned amino acid compositions in positions 217 and 221. The selection pressure analysis showed that especially VP2 is experiencing selection pressure in the variable region. In the VP1 protein we see two sites under positive selection pressure within specific motifs. VP5 showed positive selected sites mostly within the truncated region of the protein. Other proteins showed no particular interesting sites of selection. The codon adaptation analysis showed highest adaptation index for VP2. Besides VP5, which had an CAI index below one, therefore showing negative adaptation, other IPNV proteins had an CAI of barely above the value of 1. The dinucleotide abundance, focussing on CpG, showed that CpG is underrepresented in segment A and B. Discussion Phylogenetic analysis of the sequenced IPNV strains shows separate clustering of different genogroups. Genetic reassortment is observed in segment B showing a grouping within genogroup III and II although the segment A of these isolates was grouping exclusively within III. We found that over 50 % of the isolates belong to the persistent and over 30 % to the low virulent type, assuming that due to not sterilising vaccination these types were selected in the vaccinated population. The results from the CAI calculations indicate an adaptation of IPNV to its host. Together with the findings that CpG is underrepresented in IPNV it suggests that this leads to an immune escape. Especially since the selection pressure analysis showed positive selection in VP2 within the virulence determination sites of the protein, indicating that IPNV "tries" to downregulate immune recognition. The prevalence of mostly persistent type of isolates indicates together with the assumption of adaptation and immune escape that IPNV is evolving with the host in order to ensure survival.
27
HUANG, WANG HUI, and 王輝煌. "Research influence high price saloon car consumer repurchase intention after- sales service’s adjustment." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/94001437768297317408.
Full textAbstract:
碩士開南大學
企業與創業管理學系
97
Automobile purchasing is a high-involvement process for most consumers. Purchase experience and recommendation from others will impact consumer’s final decision. However, automobile manufacturers usually put sales skill before after-sales service, and regarded it as merely one source of revenue. On the other hand, there is few study focus on the relationship between after-sales service cognition and repurchase intention of car buyer. This study, explored the impact on customer satisfaction and repurchase intention from customer relationship, brand image, service quality, and product quality. In addition, this study investigated the moderating effect of after-sales service on the relations between consumer’s satisfaction and repurchase intention. Survey from 120 owners of Mercedes-Benz, the study found that brand image and product quality will be positive impact on customer satisfaction and thus improve the repurchase intention. After-sales service of equipment and professional will strengthen the impact of customer satisfaction on repurchase intention.
28
O’Dor, Matthew Arnold. "Identification of salmon can-filling defects using machine vision." Thesis, 1998. http://hdl.handle.net/2429/7749.
Full textAbstract:
During the salmon can-filling process, a number of can-filling defects can result from the incorrect
insertion of the salmon meat into the cans. These can-filling defects must be repaired before
sealing the cans. Thus, in the existing industrial process, every can is manually inspected to
identify the defective cans. This thesis details a research project on the use of machine vision
for the inspection of filled cans of salmon. The types of can-filling defects were identified and
defined through consultations with salmon canning quality assurance experts. Images of can-filling
defects were acquired at a production facility. These images were examined and feature extraction
algorithms were developed to extract the features necessary for the identification of two types
of can-filling defects. Radial basis function networks and fuzzy logic methods for classifying the
extracted features were developed. These classification methods are evaluated and compared. A
research prototype was designed and constructed to evaluate the machine vision algorithms on-line.
29
Cenere, Alvise Giovanni. "How the selective hair-care brand redken in Italy can cocreate both with hairdressers and consumers to build the salon experience of the future?" Master's thesis, 2019. http://hdl.handle.net/10362/69090.
Full textAbstract:
The scope of this paper is to analyse the current dynamics adopted by the
professional hair-care brand Redken in Italy, and how it can leverage on hairdressers and final
consumers to co-create the salon-experience of the future. Qualitative interviews were
conducted with hairdressers and managers, while consumers participated also to a quantitative
questionnaire. The research demonstrates that the Brand is co-creating well with part of the
hairdresser, which, in turn, co-creates the salon experience with customers. Other hairdressers
are not able to make the relationship valuable. Finally, it seems to be missing a direct
interaction between the brand and consumers.
30
CHOU, HUNG YI, and 周虹誼. "RESEARCH ON CUSTOMERS IMPORTANCE AND SATISFACTION IN BEAUTY AND SKIN CARE SALONS." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/ar2wp7.
Full textAbstract:
碩士臺北城市科技大學
休閒事業系碩士班
107
Along with the increase trend of the income of the people of the country, the consumption ability of the better-income groups in the society has also increased year by year. In order to meet the consumption needs of more people who love beauty, more and more beauty salon on the street has been set up. Through the "quantitative research" approach, this study attempts to understand the satisfaction and attention of consumers who come to the beauty and skin care salons for the products and services offered in the store, as well as demographic variables and consumer attributes and skin care. The difference between the satisfaction and attention of the products provided by the industry, and finally the importance-performance analysis method is used to analyze the current consumer behavior in the medical beauty skin care store to provide the operator's correction. The direction and recommendations, as well as the future of the academic and related industry of medical beauty in the policy development and operational planning, and hope to provide consumers with better service plans and visions in the future. In this study, a sample of “closed-ended questions” was conducted by consumers in the medical beauty salons where the researchers were serving, using a purposive sampling method. A total of 550 valid questionnaires were collected. Up to 91.4%, data analysis methods include descriptive statistics, reliability analysis, one-way analysis of variance, importance-performance analysis (IPA), etc.
31
Hadley, D. M., and Jo Buckberry. "Caring for the dead in late Anglo-Saxon England." 2005. http://hdl.handle.net/10454/7185.
Full text
32
Carrilho, Mariana Martins Domingues Castelo. "We care for more than hair: Salon Emotion as the key for L'Oréal Professionnel to maintain its leadership." Master's thesis, 2018. http://hdl.handle.net/10071/18662.
Full textAbstract:
The present case study is based on the hairdressers market in Portugal. Our main objective is to study the brand L´Oréal Professionnel, together with the company´s program Salon Emotion, in order to understand how the brand will sustain its leadership and continue its growth, while contributes to the market´s transformation.
In an industry that is growing slowly, side by side with a decreasing retail business, how is the professional sector thinking about reinventing itself? New business channels, like gross sellers and e-commerce, are getting stronger. Consumers have new habits, without time to waste; they are digital and look for solutions that can bring something different to their daily life. Here is where differentiation is the key, brands need to reinvent themselves to offer experiences based on personalization of services and products, as a way to attract consumers. Going to the hairdresser must became more than a basic hygiene need; it must be seen as a truly pleasurable moment, for consumers to relax and to take care of themselves.
The quantitative and qualitative analysis here developed show that the brand has a huge potential to lead this transformation, once it is the market leader, with a strong history and reputation. Always seeking innovation and technology, to enlarge and enrich its portfolio, collaborating with the best hairdressers in the world to develop skills that empower the profession and being present as the leader of hair fashion trends all over the globe. Using these strengths the brands have the potential to impact both B2B and B2C market, helping their journeys and expectations to match in a transforming way.O presente case study tem como base o mercado de cabeleireiros em Portugal. O nosso principal objetivo é estudar a marca L´Oréal Professionnel, em conjunto com o programa Salon Emotion da empresa, para perceber como é que a marca vai sustentar a sua liderança e continuar a crescer, ao mesmo tempo que contribui para a transformação do mercado. Numa indústria que apresenta um crescimento lento, paralelamente com um setor de retalho a evoluir negativamente, como é que o setor profissional pensa conseguir reinventar-se? Novos canais de negócios, como os grossistas e o e-commerce, estão cada vez mais fortes. Os consumidores têm novos hábitos, sem tempo a perder; são cada vez mais digitais e procuram soluções que tragam algo diferente para sua vida. Aqui é onde a diferenciação é chave, as marcas precisam de se reinventar para oferecer experiências baseadas na personalização de serviços e produtos, como forma de atrair consumidores. Ir ao cabeleireiro deve ser mais do que uma necessidade básica de, deve ser visto como um momento de verdadeiramente prazer, para os consumidores relaxarem e cuidarem de si. A análise quantitativa e qualitativa aqui desenvolvida mostra que a marca tem um enorme potencial para liderar essa transformação, uma vez que é líder de mercado, com uma forte história e reputação. Sempre atrás da inovação e da tecnologia, para ampliar e enriquecer o seu portfólio, em parceria com os melhores cabeleireiros do mundo para desenvolver técnicas que tornam a profissão mais forte e ainda estando presente como líder de tendências de moda e de cabelo em todo o mundo. Usando esses pontos fortes, a marca tem o potencial de impactar o mercado B2B e B2C, ajudando a que o seu percurso e expectativas a se adequem e interliguem de forma transformadora.
33
Cheng, Chien-Wen, and 鄭見文. "A SVM-based Prediction of Hair Salon Wash Care Product Sales Volume using Weather Information：A Case Study of Taichung City." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/56748z.
Full textAbstract:
碩士國立臺中科技大學
資訊工程系碩士班
104
In this study, we adopt support vector machine (SVM) to predict the hair salon wash care product sales volume according to the weather information. With climate-related open data of the Central Weather Bureau including the minimum temperature, maximum temperature, average temperature, average rainfall, wind speed, maximum ten minutes, the maximum instantaneous wind, pressure, humidity, average rainfall for several days and sunshine hours, those weather information are used as the attributes of LibSVM to run the analysis of sales volume prediction. The number of monthly sales volume of the hair salon wash care products from Jan. of 2011 to April of 2016 are collected from Taichung hairdressing salon industry by combining the weather information from Central Weather Burea as the experimental data for the prediction model. The results show that support vector machines can accurately predict the weather information for the sales volume of the hair salon wash care products. The results can help the company of the hair salon wash care products to plan good marketing campaigns and reduce inventory costs.
34
Rollinson, Njal. "THE ADAPTIVE SIGNIFICANCE OF EGG-SIZE VARIATION WITHIN AND AMONG POPULATIONS OF ATLANTIC SALMON." 2013. http://hdl.handle.net/10222/31512.
Full textAbstract:
This thesis focuses on the classic problem of investment per offspring. It is an attempt to (i) reconcile theoretical research with empirical methods that can be used to test theory, (ii) test a fundamental prediction that arises from classic theory, and (iii) test one of the more recent theoretical developments. We use Atlantic salmon (Salmo salar) as a model organism. Drawing from the classic Smith–Fretwell model, we provide defensible definitions of offspring fitness that can be used in empirical studies, and we show using simulation that the Weibull-1 statistical model provides the best estimates of optimal investment patterns. Next, we apply these methods to mark-recapture data collected for juvenile Atlantic salmon. This experiment supports the prediction that parental reproductive success is maximized by increasing investment per offspring when environmental conditions become unfavourable. Having verified this prediction, we test a general extension of classic theory which broadly suggests that large-bodied females decrease the quality of the offspring environment, such that larger females in a population ought to invest relatively heavily in investment per offspring. This might occur, for example, when larger females have a greater fecundity and if optimal investment per offspring increases with sibling competition among non-dispersive offspring. The results of this experiment generally do not support the idea that large females decrease the quality of the offspring environment in Atlantic salmon. Finally, we also provide evidence against a verbal hypothesis that attempts to explain inter-population variation in egg size of salmonids as an adaptation to population-specific spawning substrates. We conclude that the classic model of egg-size optimization can be a useful tool for understanding patterns of reproductive allocation in nature, but that investment per offspring is an extremely complex trait that cannot be fully understood by invoking a simple optimality model. Variation in investment per offspring, especially that which occurs within populations, is most parsimoniously attributed to the physiological factors (e.g., variation in testosterone levels), morphological constraints (e.g., the size of the pelvic aperture) and genetic factors (e.g., genetic correlations arising from pleiotropic genes) that affect this phenotype and that constrain adaptive evolution of this trait.
35
Johnstone, Devon. "LONG-TERM EVIDENCE THAT PRECOCIOUS PARR CAN SIGNIFICANTLY INCREASE THE EFFECTIVE SIZE OF A POPULATION OF ATLANTIC SALMON (SALMO SALAR)." 2012. http://hdl.handle.net/10222/15321.
Full textAbstract:
I describe temporal changes in the genetic composition of a small anadromous Atlantic salmon (Salmo salar) population from South Newfoundland, an area where salmon populations are considered as Threatened (COSEWIC 2010). I examined the genetic variability (13 microsatellite loci) in 869 out-migrating smolt and post-spawning kelt samples, collected from 1985 to 2011 for a total of 22 annual collections and a 30 year span of assigned cohorts. I estimated the annual effective number of breeders (Nb) and the generational effective population size (Ne) through genetic methods and demographically using the anadromous sex ratio. Comparisons between genetic and demographic estimates show that the anadromous spawners inadequately explain the observed Ne estimates, suggesting that mature male parr are significantly increasing Nb and Ne over the study period. Spawning as parr appears to be a viable and important strategy in the near absence of anadromous males.
36
"6. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 6. Anwendertreffens am 01. April 2014 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-140513.
Full text
37
Simms, Douglas Peter Allen. "Reconstructing an oral tradition problems in the comparative metrical analysis of Old English, Old Saxon and Old Norse alliterative verse /." Thesis, 2003. http://wwwlib.umi.com/cr/utexas/fullcit?p3116396.
Full text
38
"8. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 8. Anwendertreffens am 22. März 2016 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-206747.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 8. Anwendertreffen SAXSIM fand am 22.03.2016 an der TU Chemnitz stattThe Chair of Assembly and Handling Technology, which belongs to the Faculty of Mechanical Engineering, has organized the annual simulation user meeting SAXSIM since 2009. Select contributions will be published in conference proceedings. The 8th SAXSIM user meeting took place at Technische Universität Chemnitz on March 22, 2016
39
"SAXON SIMULATION MEETING : Präsentationen und Vorträge des 1. Anwendertreffens am 28. April 2009 an der TU Chemnitz." Universitätsbibliothek Chemnitz, 2009. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-200900743.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 regelmäßig jedes Jahr im Frühjahr ein Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 1. Anwendertreffen SAXSIM fand am 28.04.2009 an der TU Chemnitz statt.
Parallel zur Onlineausgabe ist eine CD-ROM der Tagungsbeiträge erschienen. Sie enthält die präsentierten Vorträge zu unterschiedlichen Themenstellungen aus den Bereichen CAD, Simulation und Berechnung.
Von Experten aus Wirtschaft und Wissenschaft wurden neben Hinweisen zu neuen Simulationsfeatures auch Einblicke und Anregungen für eine effiziente Bauteilberechnung gegeben, die Simulation komplexer Anlagen gezeigt und ingenieurtechnisch - mathematische Lösungsansätze erörtert.
40
"7. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 7. Anwendertreffens am 31. März 2015 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-171755.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert.
Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht.
Das 7. Anwendertreffen SAXSIM fand am 31.03.2015 an der TU Chemnitz statt.
41
"9. SAXON SIMULATION MEETING : Präsentationen und Vorträge des 9. Anwendertreffens am 28. März 2017 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-225813.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 9. Anwendertreffen SAXSIM fand am 28.03.2017 an der TU Chemnitz stattThe Chair of Assembly and Handling Technology, which belongs to the Faculty of Mechanical Engineering, has organized the annual simulation user meeting SAXSIM since 2009. Select contributions will be published in conference proceedings. The 9th SAXSIM user meeting took place at Technische Universität Chemnitz on March 28, 2017
42
"4. SAXON SIMULATION MEETING and Mathcad-Workshop : Präsentationen und Vorträge des 4. Anwendertreffens und des Mathcad-Workshops am 17.04.2012 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-84901.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 4. Anwendertreffen SAXSIM fand am 17.04.2012 an der TU Chemnitz statt. Zum dritten Mal wurde diese Veranstaltung durch einen Mathcad Workshop am 16.04.2012 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
43
"5. SAXON SIMULATION MEETING and Mathcad-Workshop : Präsentationen und Vorträge des 5. Anwendertreffens und des Mathcad-Workshops am 22. und 23. April 2013 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-114759.
Full textAbstract:
Das 5. Anwendertreffen SAXSIM fand am 23.04.2013 an der TU Chemnitz statt.
Zum vierten Mal wurde diese Veranstaltung durch einen Mathcad Workshop am 22.04.2013 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
44
"2. SAXON SIMULATION MEETING und Mathcad Workshop : Präsentationen und Vorträge des 2. Anwendertreffens und des Mathcad-Workshops am 26. und 27. April 2010 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-201000576.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert. Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 2. Anwendertreffen SAXSIM fand am 27.04.2010 an der TU Chemnitz statt. Erstmals wurde diese Veranstaltung durch einen Mathcad Workshop am 26.04.2010 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
45
"3. SAXON SIMULATION MEETING and Mathcad-Workshop : Präsentationen und Vorträge des 3. Anwendertreffens und des Mathcad-Workshops am 18. und 19. April 2011 an der Technischen Universität Chemnitz." Universitätsbibliothek Chemnitz, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-68176.
Full textAbstract:
Von der Professur Montage- und Handhabungstechnik der Fakultät für Maschinenbau der Technischen Universität Chemnitz wird seit 2009 das jährliche Simulationsanwendertreffen SAXSIM organisiert.
Ausgewählte Beiträge werden in Form eines Tagungsbandes veröffentlicht. Das 3. Anwendertreffen SAXSIM fand am 19.04.2011 an der TU Chemnitz statt. Zum zweiten Mal wurde diese Veranstaltung durch einen Mathcad Workshop am 18.04.2011 ergänzt, dessen Beiträge ebenfalls hinterlegt sind.
46
OUBRECHTOVÁ, Marcela. ""Kéž bych byl malířem." František Thun v době předbřeznové." Master's thesis, 2008. http://www.nusl.cz/ntk/nusl-50369.
Full textAbstract:
This thesis concerns a peer Francis Thun (1809-1871) who was one of the most important personalities in the public and cultural life in Bohemia from the 30s till the end of the 60s of the 19th century. Thun {--} a gifted visual artist himself - was particularly interested in the institutions connected with the visual art. The author shows where his long-life interest in the visual arts was formed. She follows his childhood, upbringing, his own artistic beginning and his studies. She particularly considers his ways around Europe and his stay in Dresden, that used to be one of the most important centres of the European Romanticism, and more than a year-long traveling around England, western Europe and Italy. The last part of this thesis deliberates František Thun{\crq}s public activities {--} mainly his work in the artistic politics and in the care of monuments. This work also follows Thun{\crq}s personal life, particularly his marriage with a burgher girl thanks to it he couldn{\crq}t inherite the fideicommissum. This biography is mainly based on personal materials {--} letters and diaries. In terms of them it attempts to show Thun{\crq}s personality and his important life moments.
47
Kantorová, Aneta. "Panovník v roli autora: Obraz anglosaského krále očima soudobých umělců a společnosti." Master's thesis, 2015. http://www.nusl.cz/ntk/nusl-336503.
Full textAbstract:
The present thesis focuses on the importance of the written word as a ruling device of the Anglo- Saxon kings. Due to the availability of historical evidence, the studied period begins in 597 with the arrival of Christian missionaries from Rome and ends prior to the Norman Conquest in 1066. The kings' approach to the written word is analyzed on the basis of surviving literary and iconographic evidence, i.e. on documents composed for or by the rulers, and on the visual images of the rulers as portrayed in surviving manuscripts. The first chapter provides a historical background necessary for the correct interpretation of the examined texts and portraits. This section is aimed at the main concepts discussed in the thesis: medieval authorship, medieval kingship, and the spread of Christianity within the Anglo- Saxon kingdoms. The second chapter offers the analysis of written documents and focuses on the texts composed within the scope of King Alfred's educational and religious reform. The close reading of the OE translations demonstrates the king's use of the texts as didactic tools mainly serving to promote religion and learning within the kingdom. The key texts are Gregory's Pastoral Care, Augustine's Soliloquies, and Boethius's Consolation of Philosophy; an additional context of the king's life and...