Relevant bibliographies by topics / Carbide system

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Carbide system'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Carbide system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Carbide system"

1

Gezerman, Ahmet Ozan, and Burcu Didem Çorbacıoğlu. "Effects of Mechanical Alloying on Sintering Behavior of Tungsten Carbide-Cobalt Hard Metal System." Advances in Materials Science and Engineering 2017 (2017): 1–11. http://dx.doi.org/10.1155/2017/8175034.

Full text
Abstract:
During the last few years, efforts have been made to improve the properties of tungsten carbides (WCs) by preparing composite materials. In this study, we prepared WC particles by mechanical alloying and investigated the effects of mechanical alloying conditions, such as mechanical alloying time and mechanically alloyed powder ratio, on the properties of 94WC-6Co. According to experimental studies, increasing the mechanical alloying time causes an increase in the density of tungsten carbide samples and a decrease of crystal sizes and inner strength of the prepared materials. With the increase
APA, Harvard, Vancouver, ISO, and other styles
2

Movchan, O. V., and K. O. Chornoivanenko. "Regularities of phase and structural transformation in the Fe-Cr-Ti-C system during carburization." Fundamental and applied problems of ferrous metallurgy, no. 38 (2024): 632–43. https://doi.org/10.52150/2522-9117-2024-38-632-643.

Full text
Abstract:
Diffusion carburization of ferrite alloyed with carbide-forming stabilizing ferrite components under certain conditions leads to the cooperative disintegration of ferrite into austenite and special carbide with the formation of eutectoid-like plate-rod colonies. Studying the conditions for the formation of austenite-carbide colonies shows that the driving force behind the growth of colonies is the influx of carbon. At the same time, it is necessary that carburization of ferrite simultaneously leads to austenitization and carbide formation. The analysis of the diagrams of the composition of the
APA, Harvard, Vancouver, ISO, and other styles
3

Rivero, H. D., José A. García, E. Cándido Atlatenco, Alejandro D. Basso, and J. Sicora. "Effect of the ratio Mo/Cr in the precipitation and distribution of carbides in alloyed nodular iron." MRS Proceedings 1485 (2012): 113–18. http://dx.doi.org/10.1557/opl.2013.278.

Full text
Abstract:
ABSTRACTThis investigation deals with the effect of 2/0, 1/1 and 1/0.5 Cr/Mo ratios on the local fraction, distribution and the comparative size of carbides precipitated in cast nodular iron. “Y” block castings with a thickness of 1.5 cm are cast in green sand molds. Two samples are cut from each casting, one located on the center and another on the wall. The carbide volume fraction is evaluated by a digital analysis system. Each sample is analyzed in three zones: bottom, middle and top. Carbide mappings are generated according to the average local carbide fraction in order to get the distribu
APA, Harvard, Vancouver, ISO, and other styles
4

Weinberger, Christopher R., and Gregory B. Thompson. "The crystal structure and phase stability of the zeta phase in the group VB transition metal carbides: a computational investigation." Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials 75, no. 5 (2019): 870–79. http://dx.doi.org/10.1107/s2052520619011302.

Full text
Abstract:
The crystal structure and composition of the zeta phase in the group VB transition metal carbides are not completely understood despite decades of experimental studies. As such, the phase rarely appears on phase diagrams of the group VB transition metal carbides. There is currently renewed interest in this phase, as tantalum carbide composites exhibit high fracture toughness in the presence of this phase. This work extends the initial computational study using density functional theory of the phase stability of the zeta phase in the tantalum carbide system, where the tantalum carbide zeta-phas
APA, Harvard, Vancouver, ISO, and other styles
5

Gromilov, Sergey, Anatoly Chepurov, Valeri Sonin, et al. "Formation of two crystal modifications of Fe7C3−x at 5.5 GPa." Journal of Applied Crystallography 52, no. 6 (2019): 1378–84. http://dx.doi.org/10.1107/s1600576719013347.

Full text
Abstract:
The Fe–C system, which is widely used to grow commercial high-pressure–high-temperature diamond monocrystals, is rather complicated due to the formation of carbides. The carbide Fe3C is a normal run product, but the pressure at which Fe7C3 carbide becomes stable is a subject of discussion. This paper demonstrates the synthesis of Fe7C3 carbide and its detailed study using single-crystal and powder X-ray diffraction, as well as electron probe micro-analysis and scanning electron microscopy. The experiments were performed using a multiple-anvil high-pressure apparatus of `split-sphere' (BARS) ty
APA, Harvard, Vancouver, ISO, and other styles
6

Ol'shanetskii, Vadim, and Olexander Glotka. "Predicting the composition of primary carbides of the multicomponent system Ni-5Cr-9Co-6Al-8.3W-4Re-4Ta-1Mo-1.5Nb-0.15C." Bulletin of Kharkov National Automobile and Highway University 2, no. 92 (2021): 109. http://dx.doi.org/10.30977/bul.2219-5548.2021.92.2.109.

Full text
Abstract:
Abstract. Problem. Development of new and optimization of existing casting alloys for the manufacture of blades of gas turbine engines for various purposes is an important scientific and technical problem. Given the sensitivity of the structural components to the concentration of alloying elements, there are difficulties in assessing the expected set of properties of the blades from the optimization of the chemical composition or structural state of alloys. Goal. The aim of this work is to study the specifics of the influence of alloying elements on the distribution of primary carbides in the
APA, Harvard, Vancouver, ISO, and other styles
7

Powell, Graham L. F., Ian H. Brown, and Grant D. Nelson. "Tough Hypereutectic High Chromium White Iron – A Double In Situ Fibrous Composite." Advanced Materials Research 32 (February 2008): 111–14. http://dx.doi.org/10.4028/www.scientific.net/amr.32.111.

Full text
Abstract:
A tough hypereutectic high chromium white iron has been developed by considering the alloy as a double in-situ fibrous composite and applying the principles of composite theory. The eutectic in the ternary Fe-Cr-C system solidifies as M7C3 carbide rods of irregular hexagonal cross section in a matrix of austenite. The carbide rods are intermittently joined together with no misorientation at the joint. The colonies (eutectic grains) of a 27%Cr alloy solidify with a flat solid – liquid interface. In hypereutectic high chromium white irons the primary carbide solidifies as single crystal rods wit
APA, Harvard, Vancouver, ISO, and other styles
8

Gubernat, Agnieszka. "Description of Carbides Sintering Process Using Kuczynski and Frenkel Sintering Models." Advances in Science and Technology 62 (October 2010): 209–14. http://dx.doi.org/10.4028/www.scientific.net/ast.62.209.

Full text
Abstract:
This work presents measurements concerning sintering description according to two the: Kuczynski and Frenkel models. Investigation covered selected metal–like carbides: TiC0,8, NbC and WC. Kinetic equations were also developed, according to Kuczynski model to describe sintering of each carbide and it was attempted to determine mechanisms of mass transport mechanism dominating at each sintering stage. Parameters describing sintering process of each of investigated carbides: α and β constants, the initial shrinkage rate α-1, the limit of shrinkage at infinite time β-1 and initial apparent viscos
APA, Harvard, Vancouver, ISO, and other styles
9

Glotka, O. "Prediction carbides composition in nickel-based superalloys directional crystallization." Innovative Materials and Technologies in Metallurgy and Mechanical Engineering, no. 2 (March 18, 2021): 13–21. http://dx.doi.org/10.15588/1607-6885-2020-2-2.

Full text
Abstract:
Objective. To study the specifics of the distribution of alloying elements in the carbides of the multicomponent system Ni-5Cr-9Co-6Al-1Ti-11.7W-1.1Mo-1.6Nb-0.15C by directional crystallization, using the calculated method of CALPHAD prediction. Research methods. To find regularities and calculate the distribution of alloying elements in the alloy, the latest CALPHAD method was chosen, and modeling of thermodynamic processes of phase crystallization was performed. The obtained results. The results of thermodynamic calculations of the chemical composition of carbides are given in the form of ma
APA, Harvard, Vancouver, ISO, and other styles
10

Hadi, Aseel, Ahmed Hashim Ah-yasari, and Dalal Hassan. "Fabrication of new ceramics nanocomposites for solar energy storage and release." Bulletin of Electrical Engineering and Informatics 9, no. 1 (2020): 83–86. http://dx.doi.org/10.11591/eei.v9i1.1323.

Full text
Abstract:
The carbides nanostructures have huge applications in renewable energy fields such as the saving of solar energy and release which attributed to the good their properties (thermal, electrical, mechanical, optical and chemical). So, in this paper, the solar energy storage and release of carbides nanoparticles/water for building heating and cooling applications have been investigated with different concentrations of metals carbides nanoparticles (tantalum carbide-silicon carbide). The results showed that the melting and solidification times for thermal energy storage and release decrease with an
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Carbide system"

1

Diaz-Botia, Camilo Andres. "Silicon Carbide Technologies for Interfacing with the Nervous System." Thesis, University of California, Berkeley, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10601720.

Full text
Abstract:
<p> In the past couple of decades we have seen remarkable advances in the integration of biological systems with artificial ones. Our knowledge of both of these worlds has grown exponentially, and in particular our knowledge of the human body. In recent years we have been able to understand and treat diseases we never thought we would, and we have even been able to interface with the body to restore lost functions. Direct interaction with the human brain to read and write information to it has been achieved thanks to the development of neural probes. The work presented in this thesis focused o
APA, Harvard, Vancouver, ISO, and other styles
2

Brown, Peter William. "Chemical vapor deposition of silicon carbide in the methyltrichlorosilane-hydrogen system /." The Ohio State University, 1993. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487844485899111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Neyman, Elizabeth. "Improvement in Adhesion for the Epoxy-SiC System via Plasma and Silane Surface Modification Techniques." Thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/34490.

Full text
Abstract:
<p>The adhesion durability of coatings and encapsulant materials utilized in electronic packaging is vital for device reliability in the microelectronics industry. Due to adverse operating conditions such as high moisture and high temperature environments, the adhesion between an adhesive and its substrate is typically compromised. This thesis addresses the advantages of employing plasma pretreatments and surface derivatization using silane coupling agents as surface modification techniques in an effort to enhance the adhesive bonding of epoxy to SiC coated Si wafers (SiC/Si). Durability wa
APA, Harvard, Vancouver, ISO, and other styles
4

Coletti, Camilla. "Silicon Carbide Biocompatibility, Surface Control and Electronic Cellular Interaction for Biosensing Applications." [Tampa, Fla.] : University of South Florida, 2007. http://purl.fcla.edu/usf/dc/et/SFE0002285.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fallier, William F. (William Frederick). "Analysis of system wide distortion in an integrated power system utilizing a high voltage DC bus and silicon carbide power devices." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/39730.

Full text
Abstract:
Thesis (Nav. E.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.<br>Includes bibliographical references (p. 81-82).<br>This research investigates the distortion on the electrical distribution system for a high voltage DC Integrated Power System (IPS). The analysis was concentrated on the power supplied to a propulsion motor driven by an inverter with simulated silicon carbide switches. Theoretically, silicon carbide switches have the advantage of being able t
APA, Harvard, Vancouver, ISO, and other styles
6

Fallier, William F. "Analysis of system wide distortion in an integrated power system utilizing a high voltage DC bus and silicon carbide power devices." Thesis, Monterey, California. Naval Postgraduate School, 2007. http://hdl.handle.net/10945/3006.

Full text
Abstract:
This research investigates the distortion on the electrical distribution system for a high voltage DC Integrated Power System (IPS). The analysis was concentrated on the power supplied to a propulsion motor driven by an inverter with simulated silicon carbide switches. Theoretically, silicon carbide switches have the advantage of being able to withstand a very large blocking voltage and carry very large forward currents. Silicon carbide switches are also very efficient due to their quick rise and fall times. Since silicon carbide switches can withstand high voltage differentials and switch fas
APA, Harvard, Vancouver, ISO, and other styles
7

Owens, Walten. "Aero-Thermal Characterization Of Silicon Carbide Flexible Tps Using A 30kw Icp Torch." ScholarWorks @ UVM, 2015. http://scholarworks.uvm.edu/graddis/363.

Full text
Abstract:
Flexible thermal protection systems are of interest due to their necessity for the success of future atmospheric entry vehicles. Current non-ablative flexible designs incorporate a two-dimensional woven fabric on the leading surface of the vehicle. The focus of this research investigation was to characterize the aerothermal performance of silicon carbide fabric using the 30 kW Inductively Coupled Plasma Torch located at the University of Vermont. Experimental results have shown that SiC fabric test coupons achieving surface temperatures between 1000°C and 1500°C formed an amorphous silicon dio
APA, Harvard, Vancouver, ISO, and other styles
8

Scardelletti, Maximilian C. "DEVELOPMENT OF A HIGH TEMPERATURE SILICON CARBIDE CAPACITIVE PRESSURE SENSOR SYSTEM BASED ON A CLAPP-TYPE OSCILLATOR CIRCUIT." Case Western Reserve University School of Graduate Studies / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=case1467112012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Blackham, Benjamin Luke. "The development of a binder system and process for the manufacture of large diameter tungsten carbide drill blanks." Thesis, University of Birmingham, 2015. http://etheses.bham.ac.uk//id/eprint/5592/.

Full text
Abstract:
A novel extrusion binder system was developed to enable the manufacture of tungsten carbide drill blanks greater than I 4 mm in sintered cross-sectional diameter at Sandvik Hard Materials Coventry. The binder system comprised primarily of methyl cellulose and water, which was capable of being removed from the extrudate with no adverse effects on extrudate quality or increases in drying and de-binding times. The tungsten carbide feedstock was prepared by z-blade mixing on laboratory, pilot and production plant scales. Extrudates were manufactured either as solid cylindrical rods or as rods form
APA, Harvard, Vancouver, ISO, and other styles
10

Ralston, Parrish Elaine. "Design and Verification of a High Voltage, Capacitance Voltage Measurement System for Power MOSFETs." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/36169.

Full text
Abstract:
There is a need for a high voltage, capacitance voltage (HV, CV) measurement system for the measurement and characterization of silicon carbide (SiC) power MOSFETs. The following study discusses the circuit layout and automation software for a measurement system that can perform CV measurements for all three MOSFET capacitances, CGS, CDS, and CGD. This measurement system can perform low voltage (0â 40V) and high voltage (40â 5kV) measurements. Accuracy of the measurement system can be safely and effectively adjusted based on the magnitude of the MOSFET capacitance. An IRF1010N power MOSFET,
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Carbide system"

1

H, Laakso John, and Langley Research Center, eds. System integration and demonstration of adhesive bonded high temperature aluminum alloys for aerospace structure: Phase II. National Aeronautics and Space Administration, Langley Research Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

C, Tew Roy, Schwarze Gene E, and Lewis Research Center, eds. Impact of radiation hardness and operating temperatures of silicon carbide electronics on space power system mass. National Aeronautics and Space Administration, Lewis Research Center, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Long, Duncan. AR-7 super systems. Paladin Press, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

M, Sawko Paul, and Ames Research Center, eds. Thermal degradation study of silicon carbide threads developed for advanced flexible thermal protection systems. National Aeronautics and Space Administration, Ames Research Center, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Akira, Kohyama, and CREST International Symposium on SiC/SiC Composite Materials Research and Development and its Application to Advanced Energy Systems (2002 : Kyoto, Japan)., eds. Advanced SiC/SiC ceramic composites: Developments and applications in energy systems. American Ceramic Society, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

S, El-Genk Mohamed, and United States. National Aeronautics and Space Administration., eds. A review of nuclear thermal propulsion carbide fuel corrosion and key issues, final report. National Aeronautics and Space Administration, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

S, El-Genk Mohamed, and United States. National Aeronautics and Space Administration., eds. A review of nuclear thermal propulsion carbide fuel corrosion and key issues, final report. National Aeronautics and Space Administration, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

United States. National Aeronautics and Space Administration., ed. System for the growth of bulk SiC crystals by modified CVD techniques: Final report. National Aeronautics and Space Administration, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Victor, Lukaszewicz, DellaCorte Christopher, and United States. National Aeronautics and Space Administration., eds. The tribology of PS212 coatings and PM212 composites for the lubrication of titanium 6Al-4V components of a Stirling engine space power system. National Aeronautics and Space Administration, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

François, Béguin, and Frackowiak Elzbieta, eds. Carbons for electrochemical energy storage and conversion systems. Taylor & Francis, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Carbide system"

1

Wijesundara, Muthu B. J., and Robert G. Azevedo. "System Integration." In Silicon Carbide Microsystems for Harsh Environments. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-7121-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gribkov, A. N. "Composites of the aluminium—silicon carbide system." In Metal Matrix Composites. Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1266-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Niu, Yingxi. "Homo-Epitaxy of Thick Crystalline 4H-SiC Structural Materials and Applications in an Electric Power System." In Handbook of Silicon Carbide Materials and Devices. CRC Press, 2023. http://dx.doi.org/10.1201/9780429198540-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tran, N. T. "Amorphous Silicon Carbide Thin Films Produced in the Glow Discharge Deposition System." In Amorphous and Crystalline Silicon Carbide and Related Materials. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-93406-3_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sevastyanov, V. G., R. G. Pavelko, Yu S. Ezhov, and N. T. Kuznetsov. "Thermodynamic Analysis of Synthetic Potentialities of the nSiC + SiO2 Starting System: SiC Gas-Phase Transport via Si(g) and CO(g)." In Silicon Carbide and Related Materials 2005. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schmitt, Robert, Ingrid Scholl, Yu Cai, et al. "Machine Vision System for Inline Inspection in Carbide Insert Production." In Proceedings of the 36th International MATADOR Conference. Springer London, 2010. http://dx.doi.org/10.1007/978-1-84996-432-6_77.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Arnold, Gatewood, Julian Polizzi, Syed Ibn Mohsin, Daniel Carnesi, Julius Schoop, and Fazleena Badurdeen. "An Approach to Quantifying the Lifecycle Sustainability Impacts of Tungsten Carbide Tools." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77429-4_94.

Full text
Abstract:
AbstractTungsten carbide cutting tools are widely used for their high machining performance and low cost. However, their cost does not currently reflect the material rarity, environmental costs, nor societal costs associated with their production. Critically, embodied energy makes a sizeable contribution to the total lifecycle energy consumption. This study quantifies the true triple bottom line cost of the tools with respect to established sustainability metrics by leveraging cross-disciplinary insights from the product, process, and system levels. Based on the adjusted cost, a comparative an
APA, Harvard, Vancouver, ISO, and other styles
8

Tran, A., D. Fung, M. M. Rahman, and C. Y. Yang. "A Novel L-Coupled RF PECVD System for Large-Area Deposition of a-SiC:H for Device Applications." In Amorphous and Crystalline Silicon Carbide and Related Materials. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-93406-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Baranov, I. M., V. A. Dmitriev, I. P. Nikitina, and T. S. Kondrateva. "Growth of Cubic Silicon Carbide on Silicon Using the C2HCl3-SiH4-H2 System." In Springer Proceedings in Physics. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84804-9_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hwang, Geum Chan, Junichi Matsushita, and Jae Jeong Lee. "Preparation of Si-B-C System Powder Using Silicon, Boron, and Boron Carbide." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-431-6.933.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Carbide system"

1

Stephan, Patrick M., Wade A. Taber, Christian His, and Stephan Mulch. "Design Considerations and Field Results for Back-Cast Refractory Tile Systems in Waste-to-Energy Plants." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07347.

Full text
Abstract:
Abstract A recent trend in the use of refractory materials for tube wall protection in waste-to-energy boilers has included a combination of castable silicon carbide cement and refractory tiles. The system is installed by first dry-setting the silicon carbide refractory tiles, then casting a self-flowing silicon carbide cement behind the tiles. This system provides a double layer of refractory protection, as well as increased heat flow through the refractory that leads to lower temperatures in the upper boiler sections and less slagging on the refractory in the hot zones. These installations a
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, J. Q., A. Atrens, and D. R. G. Mitchell. "Grain Boundary Characterization of X42 Pipeline Steel in Relation to IGSCC." In CORROSION 2001. NACE International, 2001. https://doi.org/10.5006/c2001-01210.

Full text
Abstract:
Abstract Grain boundaries of pipeline steel X42 were characterised by electron energy loss spectroscopy (EELS) and with energy dispersive X-ray spectroscopy using a high-resolution analytical electron microscope in order to elucidate its intergranular stress corrosion cracking mechanism. In these experiments, EELS was not a good method contrary to expectation. Carbon contamination on the specimen surface continues to be a issue. Argon plasma cleaning and Precision Ion Polishing System cleaning did not remove the carbon contamination from the sample surface. There were carbide precipitates alon
APA, Harvard, Vancouver, ISO, and other styles
3

Li, C., and T. Deng. "Development of an active energy recovery system for microsecond pulse power supplies based on thyristor and silicon carbide switches." In 2024 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2024. http://dx.doi.org/10.1109/icops58192.2024.10627723.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

He, Xihua, Yi-Ming Pan, Richard Page, et al. "Assessment of Aging Mechanisms for Stainless Steel-and Al-Based Neutron Absorbing Materials Used in Spent Nuclear Fuel Dry Cask Storage Systems." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07670.

Full text
Abstract:
Abstract At operating and decommissioned reactors, as well as independent spent fuel storage installations, in the United States, spent nuclear fuel (SNF) can be stored in sealed dry cask storage systems. Criticality of the SNF in the systems can be prevented, in part, by the placement of neutron absorbing materials (NAMs) around the SNF assemblies. NAMs include borated stainless steel, borated Al-based alloys, Al-boron carbide metal-matrix composites, and Al-boron carbide laminate composites (cermets). Integrity of the NAMs could potentially be affected by fatigue, neutron absorber depletion,
APA, Harvard, Vancouver, ISO, and other styles
5

Zheng, Lei, Anne Neville, Andrew Gledhill, and David Johnston. "Study of the Corrosion Behaviour of Nickel Tungsten Carbide in Some Water-glycol Hydraulic Fluids for Subsea Applications." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09198.

Full text
Abstract:
Abstract Corrosion failures of components in electro-hydraulic control systems can have serious consequences for the operation of an entire subsea oil recovery system, especially in water depths more than 150 metres. One reason for this is that seawater ingress can have a great effect on stainless steel 316L, the most commonly used material for the failed components of the direction control valves, since chloride ions destabilize the passive film. Other materials, claimed to be seawater tolerant, are starting to be used in this system. However, problems can still exist due to the complex facto
APA, Harvard, Vancouver, ISO, and other styles
6

Magerstaedt, Michael, Thorsten Raeth, Larry K. Lai, Dan Plourde, and Holger Rosenbleck-Schmidt. "Ten Fold Life Extension of Hydrotransport and Tailings Lines by Internal Coatings." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07904.

Full text
Abstract:
Abstract With more than half a decade of experience in oil sands coarse tailings and hydrotransport lines, internal pipe coatings made from high performance polyurethane elastomer coatings have proven to substantially extend the design life of slurry pipelines. Life extension is significantly higher in situations where erosion-corrosion conditions prevail in that under these conditions, bare carbon steel experiences rapid wall loss and often, alloyed steels or chromium carbide / tungsten carbide overlays are used to mitigate erosion-corrosion. However, such metallic solutions may be prone to e
APA, Harvard, Vancouver, ISO, and other styles
7

OZPINECI, BURAK, LEON M. TOLBERT, SYED K. ISLAM, and MD HASANUZZAMAN. "SYSTEM IMPACT OF SILICON CARBIDE POWER DEVICES." In Proceedings of the 2002 Workshop on Frontiers in Electronics (WOFE-02). WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812796912_0018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wielage, B., and S. Schuberth. "Comparative Study of the Melting and Atomization Properties of Iron-Based High-Carbide Alloys." In ITSC2011, edited by B. R. Marple, A. Agarwal, M. M. Hyland, et al. DVS Media GmbH, 2011. http://dx.doi.org/10.31399/asm.cp.itsc2011p0188.

Full text
Abstract:
Abstract Thermally sprayed cermet powder coatings as well as bulk cermet materials sintered of carbide/metal powder blends are widely used in applications with severe abrasive wear conditions. A cost-saving alternative can be provided by using iron-based melt-atomised hard alloy powder feedstocks. Among them, commercial alloys containing high amounts of vanadium and carbon obtain outstanding wear resistance due to their high volume fraction of finely dispersed, hard vanadium carbides. However, their performance is still exceeded by cemented carbides. A further improvement of the wear propertie
APA, Harvard, Vancouver, ISO, and other styles
9

Teodorescu, Laurentiu, Florin Draghici, Gheorghe Brezeanu, and Ion Rusu. "High temperature characterization system for silicon carbide devices." In 2012 International Semiconductor Conference (CAS 2012). IEEE, 2012. http://dx.doi.org/10.1109/smicnd.2012.6400734.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chou, Young-Ching, Ming-Lun Lee, Chun-Hao Chang, Cheng-Kuan Lin, and Yu-Chee Tseng. "Automated Grinding and Polishing System for Carbide Spots." In 2023 3rd International Conference on Electronic Information Engineering and Computer Science (EIECS). IEEE, 2023. http://dx.doi.org/10.1109/eiecs59936.2023.10434286.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Carbide system"

1

Slusarcyk, Joe. Aluminum/Silicon Carbide Matrix Material for Targeting System. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada482737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rodriguez, Patrick James. Characterization and refinement of carbide coating formation rates and dissolution kinetics in the Ta-C system. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/385606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Elrick, R., and R. Sallach. Boron carbide: Steam reactions with cesium hydroxide and with cesium iodide at 1270K in an Inconel 600 system. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/5835089.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

MARYLAND UNIV COLLEGE PARK. Aluminum / Silicon Carbide Matrix Material Machining for Targeting Systems. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada481261.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Alvin, M. A. Material characterization of the clay bonded silicon carbide candle filters and ash formations in the W-APF system after 500 hours of hot gas filtration at AEP. Appendix to Advanced Particle Filter: Technical progress report No. 11, January--March 1993. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10182071.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Davis, Paul R., and William A. Mackie. Development of Transition Metal Carbide Field Emitters for Use in FEA Display Systems. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada389243.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chiang, Tai C. Electronic Struture and Quantum Effects of Thin Metal Film Systems Based on Silicon Carbide. Defense Technical Information Center, 2013. http://dx.doi.org/10.21236/ada577620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

FONTECAVE, Marc, Sébastien CANDEL, and Thierry POINSOT. L'hydrogène aujourd'hui et demain. Académie des sciences, 2024. http://dx.doi.org/10.62686/5.

Full text
Abstract:
Les perspectives offertes par l’hydrogène dans le cadre de la transition énergétique et de la décarbonation du système énergétique constituent un sujet d’actualité majeur. Des sources d’hydrogène naturel ont été repérées en divers points du globe. Mais, à l’heure actuelle, il n’est pas possible de donner une estimation du potentiel en énergie primaire de ces sources, ni d’évaluer les capacités d’exploitation correspondantes. Les explorations doivent être poursuivies. L’hydrogène aujourd’hui disponible n’est pas une source d’énergie primaire mais un vecteur énergétique, produit à partir de ress
APA, Harvard, Vancouver, ISO, and other styles
9

Couture, Caroline, Jérôme Lavoué, Philippe Sarazin, Isabelle Valois, and Maximilien Debia. Substitution du dichlorométhane. IRSST, 2025. https://doi.org/10.70010/chwb3364.

Full text
Abstract:
Résumé L’exposition aux solvants organiques est une préoccupation majeure en santé et en sécurité du travail. Selon CAREX Canada, 22 000 travailleuses et travailleurs canadiens étaient exposés en 2016 au dichlorométhane (DCM), incluant 5 600 travailleuses et travailleurs québécois. Le DCM est notamment utilisé comme solvant dans les décapants à peinture et les dégraissants, comme milieu réactionnel dans la synthèse de produits pharmaceutiques et de pesticides et comme solvant pour l’extraction de substances organiques. En plus de ses effets irritants et cancérogènes, le DCM peut être responsab
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Carbide system' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography