Log in

Relevant bibliographies by topics / Carbon steel A283 / Journal articles

To see the other types of publications on this topic, follow the link: Carbon steel A283.

Journal articles on the topic 'Carbon steel A283'

Author: Grafiati

Published: 4 June 2021

Last updated: 6 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 22 journal articles for your research on the topic 'Carbon steel A283.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Choi, Chang Yong, and Dae Geun Nam. "Chromium Nitrided A283-C Steel as Bipolar Plate for PEMFC." Advanced Materials Research 197-198 (February 2011): 753–56. http://dx.doi.org/10.4028/www.scientific.net/amr.197-198.753.

Full text

Abstract:

Bipolar plate of stack in polymer electrolyte membrane fuel cell (PEMFC) has high cost and heavy weight. In this study, low carbon steel was used as a base metal of bipolar plate for the lower cost than stainless steels, which are widely researched as bipolar plate. Low carbon steel has not a good corrosion resistance. In order to improve the corrosion resistance and electrolytic conductivity, low carbon Steel needs to be surface modified. We made chromium electroplated layer of 5㎛ and 10㎛ thickness on the surface of low carbon steel, and it was thermally nitrided for 3hours at 1173K in a furn

APA, Harvard, Vancouver, ISO, and other styles

2

Dean, S. W., Cléber Alexandre da Silva, Jéferson Aparecido Moreto, Danilo Borges Villarino de Castro, and Haroldo de Araújo Ponte. "Mechanical Properties of ASTM A283 Carbon Steel Subjected to the Sulphidation Process." Journal of ASTM International 9, no. 1 (2012): 103398. http://dx.doi.org/10.1520/jai103398.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Putra, Reza, Muhammad ., Syifaul Huzni, and Syarizal Fonna. "EXPECTING OF CORROSION RATE IN A MATERIAL AFFECTED BY DIFFERENCES SOIL TYPE IN CONTROLLED ENVIRONMENTS." Materials and Corrosion Engineering Management 1, no. 2 (2020): 31–34. http://dx.doi.org/10.26480/macem.02.2020.31.34.

Full text

Abstract:

Research has been done on corrosion rates growth in SA 283 material which is influenced by differences in soil types in controlled environments. A283 grade D materials which are carbon steel formed into pipes with a diameter of 30″ which is used to distribute raw water for industrial needs. Weight loss methods that are in accordance with the ASTM G 162 standard have been used in this study. The buried time of the test specimen is 720 hours as one of the variables in calculating the value of the corrosion rate that occurs. The study was conducted at the Laboratory by controlling the soil struct

APA, Harvard, Vancouver, ISO, and other styles

4

Lakkanasri, Patomporn, and Gobboon Lothongkum. "Effect of Monoethanolamine on Corrosion of A283 Carbon Steel in Propionic Acid Solution." Engineering Journal 23, no. 4 (2019): 183–91. http://dx.doi.org/10.4186/ej.2019.23.4.183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Giudice, Fabio, Severino Missori, Francesco Murdolo, and Andrea Sili. "Metallurgical Characterization of the Interfaces in Steel Plates Clad with Austenitic Steel or High Ni Alloys by Hot Rolling." Metals 10, no. 2 (2020): 286. http://dx.doi.org/10.3390/met10020286.

Full text

Abstract:

An integrated experimental-theoretical approach to the metallurgical characterization of the interfaces in steel plates clad by hot rolling is proposed. Three different couplings of materials have been studied: ASTM A 515 Gr.60 low carbon steel clad with austenitic stainless steel AISI 304L; extra low carbon steel ASTM A283 clad with high Ni content Alloy 59; and, low carbon steel AISI 1010 clad with Cu-Ni Monel 400. Experimental investigations, which are addressed to analyse the microstructural changes near the interfaces and identify the present phases, have been carried out through scanning

APA, Harvard, Vancouver, ISO, and other styles

6

Frazão, Diana Magalhães, Ivanilda Ramos de Melo, Maxime Montoya, and Severino Leopoldino Urtiga Filho. "Biocorrosion on Surface of ASTM A283 Carbon Steel, Exposed in Diesel S10 and Tap Water." Materials Research 20, suppl 2 (2018): 808–18. http://dx.doi.org/10.1590/1980-5373-mr-2017-0066.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Selatnia, I., A. Sid, M. Benahmed, O. Dammene debbih, T. Ozturk, and N. Gherraf. "Synthesis and Characterization of a Bis-Pyrazoline Derivative as Corrosion Inhibitor for A283 Carbon Steel in 1M HCl: Electrochemical, Surface, DFT and MD Simulation Studies." Protection of Metals and Physical Chemistry of Surfaces 54, no. 6 (2018): 1182–93. http://dx.doi.org/10.1134/s2070205118060229.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Benahmed, M., I. Selatnia, N. Djeddi, S. Akkal, and H. Laouer. "Adsorption and Corrosion Inhibition Properties of Butanolic Extract of Elaeoselinum thapsioides and Its Synergistic Effect with Reutera lutea (Desf.) Maires (Apiaceae) on A283 carbon Steel in Hydrochloric Acid Solution." Chemistry Africa 3, no. 1 (2019): 251–61. http://dx.doi.org/10.1007/s42250-019-00093-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sindelar, Robert L., Poh-Sang Lam, George R. Caskey,, and Leta Y. Woo. "Flaw Stability in Mild Steel Tanks in the Upper-Shelf Ductile Range—Part I: Mechanical Properties." Journal of Pressure Vessel Technology 122, no. 2 (1999): 162–68. http://dx.doi.org/10.1115/1.556173.

Full text

Abstract:

Mechanical properties of 1950’s vintage, A285 Grade B carbon steels have been compiled for elastic-plastic fracture mechanics analysis of storage tanks (Lam and Sindelar, 2000). The properties are from standard Charpy V-notch (CVN), 0.4T planform compact tension (C(T)), and tensile (T) specimens machined from archival steel from large water piping. The piping and storage tanks were constructed in the 1950s from semi-killed, hot-rolled carbon steel plate specified as A285 Grade B. Evaluation of potential aging mechanisms at both service conditions shows no loss in fracture resistance of the ste

APA, Harvard, Vancouver, ISO, and other styles

10

Dos Santos, Rogério F., Tiago Falcade, Leonardo M. Antonini, et al. "Ionic liquids (IL) corrosion on A285 carbon steel." DYNA 81, no. 184 (2014): 122. http://dx.doi.org/10.15446/dyna.v81n184.39512.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Shishime, Keiko, Masanobu Kubota, and Yoshiyuki Kondo. "Effect of Absorbed Hydrogen on the Near Threshold Fatigue Crack Growth Behavior of Short Crack." Materials Science Forum 567-568 (December 2007): 409–12. http://dx.doi.org/10.4028/www.scientific.net/msf.567-568.409.

Full text

Abstract:

Hydrogen is considered to be a possible energy source in the coming future. However, it has been recognized that hydrogen has a detrimental effect on the fatigue strength of metal. The fatigue crack growth characteristic is an important property for the integrity assessment of hydrogen utilization machine. In this report, the effect of hydrogen on the fatigue crack propagation characteristic was studied using low alloy steel, carbon steels and A286 alloy. Especially in this study, very short pre-cracked specimen as small as 0.03 mm deep was used and the near threshold fatigue crack behavior wa

APA, Harvard, Vancouver, ISO, and other styles

12

Suwarno and Muhammad Nashir. "Effect of Sulfuric Acid Concentration on the Corrosion Rate of ASTM A213-T12 Steel." Key Engineering Materials 867 (October 2020): 213–17. http://dx.doi.org/10.4028/www.scientific.net/kem.867.213.

Full text

Abstract:

Even though carbon steel is susceptible to corrosion degradation, carbon steel is widely used for applications in the industry. Impurities in steel composition are known to affect the mechanical and corrosion properties. There are many studies on the corrosion of steel, but for a specific application, further research still required. The present work is conducted to determine the effect of low concentration of sulfuric acid on the corrosion rate of power plant steel ASTM A213-T12 with a solution concentration from 0.01-0.05 M H2SO4. The corrosion rate was determined by using an immersion test

APA, Harvard, Vancouver, ISO, and other styles

13

Krid, Ferial, Emna Zouaoui, and Mohamed Salah Medjram. "Aqueous Extracts of Opuntia Ficus-Indica as Green Corrosion Inhibitor of A283C Carbon Steel in 1N Sulfuric Acid Solution." Chemistry & Chemical Technology 12, no. 3 (2018): 405–9. http://dx.doi.org/10.23939/chcht12.03.405.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Lam, P. S., Y. J. Chao, X. K. Zhu, Y. Kim, and R. L. Sindelar. "Determination of Constraint-Modified J-R Curves for Carbon Steel Storage Tanks." Journal of Pressure Vessel Technology 125, no. 2 (2003): 136–43. http://dx.doi.org/10.1115/1.1564069.

Full text

Abstract:

Mechanical testing of A285 carbon steel, a storage tank material, was performed to develop fracture properties based on the constraint theory of fracture mechanics. A series of single edge-notched bend (SENB) specimen designs with various levels of crack tip constraint were used. The variation of crack tip constraint was achieved by changing the ratio of the initial crack length to the specimen depth. The test data show that the J-R curves are specimen-design-dependent, which is known as the constraint effect. A two-parameter fracture methodology is adopted to construct a constraint-modified J

APA, Harvard, Vancouver, ISO, and other styles

15

Lam, Poh-Sang, and Robert L. Sindelar. "Flaw Stability in Mild Steel Tanks in the Upper-Shelf Ductile Range—Part II: J-Integral-Based Fracture Analysis." Journal of Pressure Vessel Technology 122, no. 2 (1999): 169–73. http://dx.doi.org/10.1115/1.556174.

Full text

Abstract:

The J-integral fracture methodology was applied to evaluate the stability of postulated flaws in mild steel storage tanks. The material properties and the J-resistance JR curve were obtained from the archival A285 Grade B carbon steel test data. The J-integral calculation was based on the center-cracked panel (CCP) solution of Shih and Hutchinson (1976, ASME J. Eng. Mater. Technol. 98, pp. 289–295). A curvature correction was applied to account for the cylindrical shell configuration. A finite element analysis of an arbitrary flaw in the storage tank demonstrated that the curvature-corrected C

APA, Harvard, Vancouver, ISO, and other styles

16

Chaisri, Mongkol, and Prachya Peasura. "Effect of Gas Metal Arc Welding Parameters on Mechanical Properties for Carbon Steel ASTM A285 Grade A." Advanced Materials Research 341-342 (September 2011): 16–20. http://dx.doi.org/10.4028/www.scientific.net/amr.341-342.16.

Full text

Abstract:

The research was study the effect of gas metal arc welding process parameters on mechanical property. The specimen was carbon steel ASTM A285 grade A which thickness of 6 mm. The experiments with full factorial design. The factors used in this study are shielding gas and voltage. The welded specimens were tested by tensile strength testing and hardness testing according to ASME boiler and pressure vessel code section IX 2007. The result showed that both of shielding gas and voltage had interaction on tensile strength and hardness at 95% confidential (P value < 0.05). Factors affecting the t

APA, Harvard, Vancouver, ISO, and other styles

17

Zhu, X. K., P. S. Lam, and Y. J. Chao. "Application of normalization method to fracture resistance testing for storage tank A285 carbon steel." International Journal of Pressure Vessels and Piping 86, no. 10 (2009): 669–76. http://dx.doi.org/10.1016/j.ijpvp.2009.03.009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

KONDO, Yoshiyuki, Masanobu KUBOTA, Keiko SHISHIME, and Jun-ichiro YAMAGUCHI. "Effect of Absorbed Hydrogen on the Near Threshold Fatigue Crack Growth Behavior of Short Crack (Examination on Low Alloy Steel, Carbon Steel and Heat Resistant Alloy A286)." Transactions of the Japan Society of Mechanical Engineers Series A 74, no. 746 (2008): 1366–72. http://dx.doi.org/10.1299/kikaia.74.1366.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

YANO, Takuma, Hiroshi ABE, TAKAMICHI Miyazaki, Yutaka WATANABE, Kazutoshi FUJIWARA, and Kimitoshi YONEDA. "A233 Relationship between thinning rate of carbon steels due to flow-accelerated corrosion and characteristics of oxide films formed." Proceedings of the National Symposium on Power and Energy Systems 2015.20 (2015): 205–8. http://dx.doi.org/10.1299/jsmepes.2015.20.205.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Krinitsin, P. G., A. G. Grinkevich, and A. S. Yasinskiy. "Increasing the reliability of refrigerators used to produce green paste." Tsvetnye Metally, April 30, 2021, 48–53. http://dx.doi.org/10.17580/tsm.2021.04.08.

Full text

Abstract:

The work is aimed at the oxidative processes occurring in the metallic structures of the universal refrigerators “UKHB 3/30” used to transport and cool calcined coke. The temperature of the coke entering the device reaches 1320 oC. As it moves along the device, chemical and thermal effects occur on unprotected metallic structures with the formation of erosion centers and through damage to the shells. The service life of refrigerators hot-cut metallic structures made of A284 Grade B (ASTM) is 1 year, which determines its repairs frequency. Experiments on the oxidative processes in real conditio

APA, Harvard, Vancouver, ISO, and other styles

21

"The Influence of Annealing and Normalizing Processes on the Mechanical Properties and Chemical Composition of Carbon Steel ASTM A285Gr.C." International Journal of Recent Technology and Engineering 8, no. 5 (2020): 4928–33. http://dx.doi.org/10.35940/ijrte.e6020.018520.

Full text

Abstract:

Paper Carbon steel ASTM A285 Grade C it’s easy to use and has all the material properties that are suitable for many purposes. One of the most metallurgical processes is heat treatment. Heat treatment on carbon steel is to improve ductility, toughness, strength, hardness and tensile strength and to relieve internal stress developed in the material. This paper describes the effect of rising temperature change on the mechanical properties of specimens. Two important processes of heat treatment are achieved in this paper; First heat treatment process is "Annealing" that involves heating specimens

APA, Harvard, Vancouver, ISO, and other styles

22

Ferreira, Claudio Bittencourt. "Certification of Marine Energy Converters: The Experience so Far." Journal of Offshore Mechanics and Arctic Engineering 130, no. 4 (2008). http://dx.doi.org/10.1115/1.2948954.

Full text

Abstract:

In the past few years, DNV has been involved in a variety of projects related to marine energy converters. All projects have been characterized for the handling of technical uncertainties due to the application of new technology or proven technology in different areas of application. A systematic approach based on the DNV RP-A203 Qualification of New Technology was applied combined with the Guidelines for Design and Operation of Wave Energy Converters (May 2005—work carried out by DNV under Commission of Carbon Trust as part of Marine Energy Challenge) to steer the third party activity, but, m

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!