Academic literature on the topic 'Card packaging'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Card packaging.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Card packaging"

1

Zhang, Yue, Charles J. Banks, and Sonia Heaven. "Co-digestion of source segregated domestic food waste to improve process stability." Bioresource Technology 114, no. 2012 (2012): 168–78. https://doi.org/10.1016/j.biortech.2012.03.040.

Full text
Abstract:
Cattle slurry and card packaging were used to improve the operational stability of food waste digestion, with the aim of reducing digestate total ammoniacal nitrogen concentrations compared to food waste only. Use of cattle slurry could have major environmental benefits through reducing greenhouse gas emissions associated with current management practices; whilst card packaging is closely linked to food waste and could be co-collected as a source segregated material. Both options increase the renewable energy potential whilst retaining organic matter and nutrients for soil replenishment. Co-di
APA, Harvard, Vancouver, ISO, and other styles
2

Delalic, Zdenka J., Sandeepsarma Josyula, and B. Anand. "Packaging of a Fingerprint Based Access Control System." International Symposium on Microelectronics 2010, no. 1 (2010): 000047–51. http://dx.doi.org/10.4071/isom-2010-ta2-paper3.

Full text
Abstract:
Verification for access control is faster and cheaper than identification based access control systems. The aim of this project was to develop a fingerprint based access control system, where the verification or validation of the entry is based upon the data from a RFID card. The multi-hop unit is controlled by a PIC 18F series, RISC processor. The capacitive sensor employed extracts 40 minutiae points, which are verified based on the pre-stored data in the RFID card. The capacitive sensor is capable of detecting human tissue, eliminating brute-force or latent print attacks. The low power RFID
APA, Harvard, Vancouver, ISO, and other styles
3

Taylor, Christine, Budy Notohardjono, Suraush Khambati, and Shawn Canfield. "Designing Electronic Card Packages Against Shipping Shock." Journal of the IEST 64, no. 1 (2021): 42–49. http://dx.doi.org/10.17764/1557-2196-64.1.42.

Full text
Abstract:
Abstract In optimizing packaging design, the product’s fragility is qualified by a protype undergoing quantitative and qualitative tests that rely heavily on past knowledge and experiments. By the addition of finite element analysis (FEA), the product’s fragility can be obtained in the initial stages of product design with material characterization and simulation. FEA can predict Gs on the product as well as examine the strains, which interpret product failure more easily in the design stage. To incorporate FEA, first the foam material was measured at various strain rates under compression. Ne
APA, Harvard, Vancouver, ISO, and other styles
4

Hidayah, Fitricia, and Jupriani Jupriani. "Card Game "Ngomong Apa Ya?"." DEKAVE : Jurnal Desain Komunikasi Visual 12, no. 1 (2022): 77. http://dx.doi.org/10.24036/dekave.v12i1.116997.

Full text
Abstract:
Berkomunikais secara langsung kerap menjadi hal yang menjebak bagi beberapa kalangan. Hal ini terjadi karena pada era pandemi banyak waktu individu hanya waktu yang lama didalam rumah dan berinteraksi dengan individu yang sama hal ini menyebabkan perilaku isolasi sosial pasca pandemi. Maka dari itu diperlukan media yang dapat membantu mengatasi masalah tersebut.Tujuan dari Permainan kartu Perancangan “Ngomong Apa Ya?” ini agar dapat membangun komunikasi antar pemain. Teori yang digunakan dalam kartu gam ini adalah teori komunikasi, fase dewasa awal, desain komunikasi visual, warna, tipografi,
APA, Harvard, Vancouver, ISO, and other styles
5

Tiano, Frank J. "The Generic Blister Card -A Versatile Approach to Unit Dose Packaging." Clinical Research Practices and Drug Regulatory Affairs 4, no. 6 (1986): 477–84. http://dx.doi.org/10.3109/10601338609031006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Minarsih, Siti, Budi Dharmawan, and Irene Kartika Eka Wijayanti. "Strategi Meningkatkan Adopsi Inovasi Program Kartu Tani Di Kabupaten Banyumas, Jawa Tengah, Indonesia." Jurnal Ekonomi Pertanian dan Agribisnis 7, no. 2 (2023): 732. http://dx.doi.org/10.21776/ub.jepa.2023.007.02.26.

Full text
Abstract:
<em>One of the most important production factors in increasing production and productivity of agricultural commodities is fertilizer. Moment this still many farmers who have not understand about the card program farmer as tool in distribution fertilizer subsidized , so required strategy for Upgrade adoption card program innovation farmer . The research aims to analyze internal and external factors as well as strategies to increase the adoption of innovations in the use of farmer cards in the district Banyumas . The research method used is a qualitative method. The analysis carried out is
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Johan. "ACA bonding technology for low cost electronics packaging applications – current status and remaining challenges." Soldering & Surface Mount Technology 13, no. 3 (2001): 39–57. http://dx.doi.org/10.1108/09540910110407397.

Full text
Abstract:
Anisotropically Conductive Adhesives (ACAs) have been used in electronics packaging for over a decade on glass substrates, and more recently in contactless smart‐card module assembly and for bare chip attach on flexible and rigid substrates. Summarises various technologies used in connection with ACA joining. A summary of our understanding of the electrical, thermal, physical, chemical, environmental and cost behaviours of ACAs in conjunction with various packaging applications is elaborated. Finally, future research areas and remaining issues are pointed out.
APA, Harvard, Vancouver, ISO, and other styles
8

Swasty, Wirania, Muhizam Mustafa, and Josua Boyke William Jawak. "What Experts Say about (Un)Common Color on Food Packaging (Study Case in Banana Chips Package Design)." KnE Social Sciences 10, no. 2 (2025): 1–8. https://doi.org/10.18502/kss.v10i2.17870.

Full text
Abstract:
Food packaging design relies heavily on the strategic use of color, as it has the potential to influence consumer perception and buying behavior. An important consideration is whether incorporating uncommon colors in food packaging design is a good strategy. Several research pertaining (un)common colours in food packaging have been conducted. This paper presents the findings from expert validity following the card sorting task that has been done. This expert validation used quantitative and qualitative approaches. The experts were asked to give agreement on each item based on a 3-point scale.
APA, Harvard, Vancouver, ISO, and other styles
9

USHIKI, Susumu, and Hideo TAKAKUSAGI. "Advanced BGA/CSP and Assembling Technology. PC Card Packaging Technology Using BGA Package." Journal of Japan Institute for Interconnecting and Packaging Electronic Circuits 11, no. 2 (1996): 92–95. http://dx.doi.org/10.5104/jiep1995.11.92.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sari, Novi Purnama, Muhammad Athariq Rahmadianto, Raihan Thoriq Ramadhan, and Yesaya Firdaus Napitupulu. "Implementation of kansei engineering in the design of packaging design elements: study case for Food MSME." Operations Excellence: Journal of Applied Industrial Engineering 1, no. 1 (2025): 105. https://doi.org/10.22441/oe.2025.v17.i1.135.

Full text
Abstract:
The current packaging of Rangi Cake products in the market is criticized for its simplicity and lack of adequate safety features, which compromises both product safety and visual appeal. To address this, a research initiative was undertaken to enhance the design and functionality of Rangi Cake packaging. The study employed Kansei engineering to discern consumer preferences regarding packaging. The findings incorporated 46 packaging samples and identified 44 Kansei words. Utilizing Principal Component Analysis (PCA), two design concepts emerged: "Standard-simple" and "informative-efficient." Th
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Card packaging"

1

Siddiqi, Saad Ahmed. "Smart Card Packaging Process Control System." Thesis, KTH, Kommunikationssystem, CoS, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-100020.

Full text
Abstract:
The project focuses on the packaging process of the smart card manufacturing industry. The idea of the project concerns how to increase production packaging efficiency by introducing a control system. After taking an in-depth look at the current production environment, the following system goals were defined: packaging time reduction, cost reduction, decrease in human errors, and reducing the number of customer complaints. To achieve these goals, the thesis project was divided into the following tasks: discovering a feasible solution, actual system development, testing, and evaluation. The pro
APA, Harvard, Vancouver, ISO, and other styles
2

Wagner, Julie Ann. "Unit dose packaging to increase the frequency of blood glucose testing in patients with diabetes." Scholarly Commons, 1996. https://scholarlycommons.pacific.edu/uop_etds/2800.

Full text
Abstract:
Nonadherence with blood glucose testing is a prevalent and potentially dangerous problem for patients with diabetes. Unit dose packaging has been shown to increase medication adherence in several populations. However, this technique has not been applied to products other than pills, and has not been used with diabetes patients. The present study used unit dose packaged blood testing and injection materials and a brief telephone prompt to increase the frequency with which diabetes patients test their blood glucose. In a combined multiple baseline A-B-BC-A design, baseline was established for at
APA, Harvard, Vancouver, ISO, and other styles
3

Omerza, Kevin Edward. "The Economic Impact of a Pharmacy-Based Hybrid Medication Adherence Model in Patients with Metabolic Syndrome." University of Toledo Health Science Campus / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=mco1430521410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

King, Larrie Leon Jr. "Private Labels and Personal Care: A Focus on Store Brand Package Design, Branding Design and Consumer Attitudes Towards Private Label Personal Care Products." Kent State University / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=kent1400330956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ameri, K. Al, P. Hanson, N. Newell, J. Welker, K. Yu, and A. Zain. "DESIGN OF A RACE CAR TELEMETERING SYSTEM." International Foundation for Telemetering, 1997. http://hdl.handle.net/10150/607539.

Full text
Abstract:
International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, Nevada<br>This student paper was produced as part of the team design competition in the University of Arizona course ECE 485, Radiowaves and Telemetry. It describes the design of a telemetering system for race cars. Auto Racing is an exciting sport where the winners are the ones able to optimize the balance between the driver’s skill and the racing teams technology. One of the main reasons for this excitement is that the main component, the race car, is traveling at e
APA, Harvard, Vancouver, ISO, and other styles
6

Al-Nehlawi, Valverde Aida. "Improving poultry meat preservation by means of carbon dioxide atmospheres and high hydrostatic pressure." Doctoral thesis, Universitat Autònoma de Barcelona, 2014. http://hdl.handle.net/10803/284856.

Full text
Abstract:
La carn de pollastre és una de les carns més consumides a tot el món. Per tal d’ampliar els canals de distribució de la carn fresca i els seus derivats, la indústria alimentària ha desenvolupat mètodes de conservació per tal d’allargar-ne la seva vida útil i que permetin mantenir les propietats i la qualitat del producte original. L’envasament en atmosfera modificada (EAM), juntament amb les temperatures de refrigeració, s'ha convertit en el mètode d'envasament més utilitzat per conservar la carn d'aus de corral. Consisteix en envasar l’aliment i modificar-ne l'atmosfera que l'envolta pe
APA, Harvard, Vancouver, ISO, and other styles
7

Hsiao, I.-Han, and 蕭憶涵. "The Packaging Design and Creating Research of Male Skin Care Products." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/28955981336505533799.

Full text
Abstract:
碩士<br>銘傳大學<br>商業設計學系碩士班<br>103<br>From the Japanese colonial period, cosmetic products demand is stable, and therefore occupy a portion of the market in the industry. As long as women unchanging beauty of nature, cosmetic products will always have a market presence. Today, the market is flooded with a number of different brands of cosmetic products, make choose increases, and see also endless. Because of advance times, product have big change in function and packaging design. Become exquisite design, more closer to demand party. So that the target consumer is no longer just for women, but also
APA, Harvard, Vancouver, ISO, and other styles
8

Syu, Fu-Yang, and 許富陽. "A Study of Visual Design for the Pharmaceutical Packaging of Primary Medical Care - Bottle / Can Containers as An Example." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/34649091265715489637.

Full text
Abstract:
碩士<br>雲林科技大學<br>視覺傳達設計系碩士班<br>98<br>Based on the frequently heard medical mal-practice in recent years, the study explores the avoidance of visual errors of pharmacists via the visual design of drug packing. Through collection of relevant literature information and analysis of current drug packing status, as well as clarification of interview contents with pharmacists and conduction of questionnaire survey with domestic pharmacy department students regarding the implementation of improved drug packing, the study proposed the drug packing design for easy visual identification. It was found from
APA, Harvard, Vancouver, ISO, and other styles
9

Paulo, Filipa Lages Torres. "Sensorial interaction with packaging and its effect on purchase intention of a new body care brand : duality between offline and online distribution channels." Master's thesis, 2017. http://hdl.handle.net/10400.14/22718.

Full text
Abstract:
The present thesis addresses the sensorial challenges between offline and online channels in the interaction with new brands’ packaging and its impact on purchase intention. Through different distribution channels, consumers’ interaction with products and consequent purchase outcome, are distinct – on online channel the individual is solely dependent on sight, whereas on offline sensorial interaction allows more dimensions. Therefore, is the online channel a good platform to launch new products? The above mentioned reasoning was applied to FMCG. Particularly, it was done through the cre
APA, Harvard, Vancouver, ISO, and other styles
10

Brauckmeyer, Clarissa Helena Pasik. "The naked truth : the impact of packaging and green trust on consumers’ perceived quality and purchase intention : experimental study on the DACH region based on the innovation of shampoo bars." Master's thesis, 2019. http://hdl.handle.net/10400.14/29269.

Full text
Abstract:
Based on the increased importance of Green Marketing and sustainable consumption, the packaging-free trend was analyzed in a context in which academic literature is scarce: hair care. Packaging has received less attention in research but is crucial in a consumer’s encounter with a product. Therefore, the dissertation’s objective was to determine how packaging (no packaging (naked) vs. excess packaging) of innovative solid shampoo bars impacts consumer’s perceived quality and purchase intention. Furthermore, it was explored how Green Trust can moderate the relationship between packaging and con
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Card packaging"

1

Honeybone, Ian. Card engineering. Nippan Publications, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Honeybone, Ian. Card engineering. Outline Press, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, A. James. Packaging outpatient physician services: Final report. Center for Health Economics Research, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wagner, John R. Multilayer flexible packaging: Technology and applications for the food, personal care and over-the-counter pharmaceutical industries. William Andrew, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Company, Topps, ed. Wacky packages. Abrams, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bogen, Jonathan D. Packaging diagnostic test interpretation and surgical procedures with office visits: Final report. Center for Health Economics Research, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

D, Agonafer, American Society of Mechanical Engineers. Electrical and Electronic Packaging Division., and International Mechanical Engineering Congress and Exposition (1996 : Atlanta, Ga.), eds. Application of CAE/CAD to electronic systems: Presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia. American Society of Mechanical Engineers, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jay, Lynch, and Topps Chewing Gum Inc, eds. Wacky packages: New new new. Abrams ComicArts, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jay, Lynch, ed. Wacky packages: New new new. Abrams ComicArts, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Packaging with card. Art & Craft, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Card packaging"

1

Engel, Peter A. "Stress Analysis for Component-Populated Circuit Cards." In Electronics Packaging Forum. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-009-0439-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pitarresi, James M. "Modeling Concepts for the Vibration Analysis of Circuit Cards." In Electronics Packaging Forum. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-009-0439-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Peter Nan-shong. "Packaging and Funding of NRCMCI." In Public Policy and Health Care in China. Routledge, 2023. http://dx.doi.org/10.4324/9781003389934-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

da Silva, Antônio Celso, Celio Takashi Higuchi, Heather A. E. Benson, and Vânia Rodrigues Leite-Silva. "Packaging of Cosmetic and Personal Care Products." In Cosmetic Formulation. CRC Press, 2019. http://dx.doi.org/10.1201/9780429190674-23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Duber-Smith, Darrin C. "The Natural Personal Care Market." In Formulating, Packaging, and Marketing of Natural Cosmetic Products. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118056806.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zheng Li, Jeremy. "Automated and High-Speed Packaging System." In CAD, 3D Modeling, Engineering Analysis, and Prototype Experimentation. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05921-1_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dadlani, Malavika, Anuja Gupta, S. N. Sinha, and Raghavendra Kavali. "Seed Storage and Packaging." In Seed Science and Technology. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-5888-5_11.

Full text
Abstract:
AbstractStorage is an essential component of seed programmes, which primarily aims at maintaining the high-quality standards of the seed from harvest till the time of sowing the crop in the next or successive seasons. In addition to this, seeds are also stored for longer durations to maintain stocks for seed trade at national and international levels as per market demands and as a buffer against crop failures in times of natural calamities or other exigencies, to maintain seeds of the parental lines for hybrid seed production in one or more seasons, to conserve active genetic stocks for breedi
APA, Harvard, Vancouver, ISO, and other styles
8

Butler, Paul. "Smart Packaging in the Health, Beauty and Personal Care Sectors." In Smart Packaging Technologies for Fast Moving Consumer Goods. John Wiley & Sons, Ltd, 2008. http://dx.doi.org/10.1002/9780470753699.ch15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kilfoyle, Brian E., Diksha Kaushik, Jenna L. Terebetski, Sonali Bose, and Bozena B. Michniak-Kohn. "The Use of Quercetin and Curcumin in Skin Care Consumer Products." In Formulating, Packaging, and Marketing of Natural Cosmetic Products. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118056806.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Benabdellah, Karim, Simone Thomas, and Hinrich Abken. "Genetic Engineering of Autologous or Allogeneic Immune Effector Cells." In The EBMT/EHA CAR-T Cell Handbook. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94353-0_2.

Full text
Abstract:
AbstractManufacturing immune effector cells (T or NK cells) with CAR-encoding DNA sequences requires efficient and safe genetic engineering procedures. For this purpose, an appropriate genetic vector is chosen according to numerous factors, including the vector genome packaging capacity, cellular tropism, genomic integration, immune toxicity, and other factors. In clinical trials, genomes integrating viral vectors, in particular vectors based on members of the Retroviridae family, such as retroviruses and lentiviruses, have been successfully used for more than 20 years. These vectors contain a
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Card packaging"

1

Zhang, Weiyi, Guangjun Lu, and Rushen Wei. "Die Attach Failure Modes Analysis and Thermal Warpage Simulation of MicroSD Card COB Packaging." In 2025 26th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2025. https://doi.org/10.1109/eurosime65125.2025.11006559.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yoon, Sungjin, Manho Lee, Kwangho Kim, et al. "Crosstalk Analysis in Add-In Card structure for High-Speed SerDes Channels with PCIe Gen6." In 2024 IEEE 33rd Conference on Electrical Performance of Electronic Packaging and Systems (EPEPS). IEEE, 2024. http://dx.doi.org/10.1109/epeps61853.2024.10754560.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Patic, Paul Ciprian, and Gabriela Mantescu. "SIMULATION AND OPTIMIZATION OF EQUIPMENT FOR UNLOADING LONG METAL BARS." In SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/6.1/s24.15.

Full text
Abstract:
The dynamics of human society is directly related to the dependence on automation, and we can no longer produce almost anything without industrial automation. Automation is often associated with the industrial field, but automation has penetrated many areas of everyday life. Domains such as environmental protection, global trade, car, naval or rail traffic (increasingly intense), agriculture, construction and last but not least the medical field are some examples in which automation is present and in which they have a decisive role. This studied equipment is part of a technological flow to pro
APA, Harvard, Vancouver, ISO, and other styles
4

Gallaher, Andrew. "Method for Estimating Inertial Properties of Rotorcraft in Conceptual Design." In Vertical Flight Society 73rd Annual Forum & Technology Display. The Vertical Flight Society, 2017. http://dx.doi.org/10.4050/f-0073-2017-12022.

Full text
Abstract:
The conceptual design of aircraft is a continuously evolving and expanding discipline where the primary task is to perform a trade-space analysis to meet a set of operational and performance requirements. One of the major aspects of conceptual design is mass properties analysis, which involves analyzing the mass distribution of an aircraft layout. The results of this analysis can be used in other aspects of the design process: handling qualities analysis, packaging layout, control surface sizing, and inertial loading for structural design. Traditionally, and when not performed using parametric
APA, Harvard, Vancouver, ISO, and other styles
5

Xiao, Yi, Jianfeng Zeng, Yucai Huang, Jonghyun Chae, Senyun Kim, and Myungkee Chung. "Improvement of smart card mechanical properties." In High Density Packaging (ICEPT-HDP). IEEE, 2011. http://dx.doi.org/10.1109/icept.2011.6066866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chen Zhangjin, Jin Chen, and Wang Hao. "Development of OLED demonstration system based on SD card." In 2008 International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP). IEEE, 2008. http://dx.doi.org/10.1109/icept.2008.4607014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Betman, Ronen, and Eli Altus. "Dynamic behavior of a populated circuit card assembly." In 2006 8th Electronics Packaging Technology Conference. IEEE, 2006. http://dx.doi.org/10.1109/eptc.2006.342753.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Feng Wufeng. "Flip chip method in smart card/smart label packaging." In ICEPT 2003. Fifth International Conference on Electronic Packaging Technology. Proceedings. IEEE, 2003. http://dx.doi.org/10.1109/eptc.2003.1298713.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Brun, J., R. Franiatte, C. Puget, et al. "Localized Micro-Inserts Connection for Smart Card Secure Micro Packaging." In 2005 Conference on High Density Microsystem Design and Packaging and Component Failure Analysis. IEEE, 2005. http://dx.doi.org/10.1109/hdp.2005.251415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhou, De-xiang, Fei Pan, Jian-hui Liu, Rui-Min Xing, and Rui-Feng Sun. "Key Technologies of High-end SOC Probe Card." In 2022 23rd International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2022. http://dx.doi.org/10.1109/icept56209.2022.9873190.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Card packaging"

1

Romano, T. FFTF railroad tank car safety evaluation for packaging. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/332181.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Carlstrom, R. F. FFTF railroad tank car Safety Evaluation for Packaging. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/272485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dehaene, Michiel, Daniel López-García, Jana Fried, et al. SOIL NEXUS: Urban soil care for food production, community greenspace, and environmental resilience. Coventry University, 2024. https://doi.org/10.18552/cawr/2024/0002.

Full text
Abstract:
Global urbanisation is leading to the degradation of living soils, with substantial and direct impacts on climate, biodiversity, food security, and human health. Urban land use policies are beginning to address soil protection. However, they rarely address the depollution and remediation of urban soils and the revitalisation of the agricultural socio-economic fabric, both essential to recover and maintain healthy soils. Instead polluted soils are often managed through further soil sealing (i.e. covering with a plastic ‘geotextile’ layer to isolate it and adding new soil on top). As alternative
APA, Harvard, Vancouver, ISO, and other styles
4

Choi, Y., G. Lee, and P. Rodgers. Understanding roles of care in the design process for sustainable behaviour: commitment and responsibility in packaging reuse. University of Limerick, 2021. http://dx.doi.org/10.31880/10344/10202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Provider behavior change: Social and behavior change approaches to quality of care in family planning. Population Council, 2023. http://dx.doi.org/10.31899/sbsr2023.1001.

Full text
Abstract:
Breakthrough RESEARCH was USAID’s flagship social and behavior change (SBC) research and evaluation project to drive the generation, packaging, and use of innovative SBC research to inform programming. A six-year project (2017–2023), Breakthrough RESEARCH was led by the Population Council in collaboration with our consortium partners: Tulane University, Avenir Health, Population Reference Bureau, Institute for Reproductive Health at Georgetown University, and ideas42. This legacy resource highlights evidence, insights, and learnings over the past six years from Breakthrough RESEARCH’s work to
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!