Relevant bibliographies by topics / Cast basalt

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Cast basalt'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cast basalt.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cast basalt"

1

Zlebek, T., J. Hodul, L. Meszarosova, and R. Drochytka. "Chemical stability of innovative grouts for cast basalt elements." IOP Conference Series: Materials Science and Engineering 1039 (January 19, 2021): 012024. http://dx.doi.org/10.1088/1757-899x/1039/1/012024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Karthigeyan, R., and G. Ranganath. "Effect of Forging Parameters on Low Cycle Fatigue Behaviour of Al/Basalt Short Fiber Metal Matrix Composites." Scientific World Journal 2013 (2013): 1–6. http://dx.doi.org/10.1155/2013/250513.

Full text
Abstract:
This paper deals with metal matrix composites (MMCs) of Al 7075 alloy containing different weight percentage (2.5, 5, 7.5, and 10) basalt short fiber reinforcement and unreinforced matrix alloy. The samples were produced by the permanent stir casting technique. The casting ingots were cut into blanks to be forged in single stage and double stage, using MN press and graphite-based lubricant. The microstructures and fatigue properties of the matrix alloy and MMC samples were investigated in the as cast state and in the single and double stage forging operations. The microstructure results showed that the forged sample had a uniform distribution of the basalt short fiber throughout the specimens. Evaluation of the fatigue properties showed that the forged samples had higher values than those of the as cast counterparts. After forging, the enhancement of the fatigue strength of the matrix alloy was so significant and high in the case of 2.5 and 5.0 wt. percentage basalt short fiber reinforced MMC, and there was no enhancement in 7.5 and 10 weight percentages short fiber reinforced MMCs. The fracture damage was mainly due to decohesion at the matrix-fiber interface.
APA, Harvard, Vancouver, ISO, and other styles
3

Popp, Ilie Octavian. "Some aspects regarding the thermic behaviour of a basalt parts in machine building industry." MATEC Web of Conferences 290 (2019): 01015. http://dx.doi.org/10.1051/matecconf/201929001015.

Full text
Abstract:
This work aims to present some aspects regarding the opportunity of using basalt in manufacturing the subassemblies of machine tools. Melted and recrystallized basalt has demonstrated promising behavior with regards of its use in manufacturing, as reported in the literature. The researches presented in this work were focused on analyzing the behavior of basalt parts for machine tools submitted to thermic stress. The tests were made using grey cast iron and steel parts as reference for a comparative study. Testing methodology, specific measuring apparatus used, experimental test data records, data processing and resulting conclusions regarding the possibility of using basalt in machine tools manufacturing are presented in the paper.
APA, Harvard, Vancouver, ISO, and other styles
4

Ayub, Tehmina, Nasir Shafiq, and M. Fadhil Nuruddin. "Effect of Chopped Basalt Fibers on the Mechanical Properties and Microstructure of High Performance Fiber Reinforced Concrete." Advances in Materials Science and Engineering 2014 (2014): 1–14. http://dx.doi.org/10.1155/2014/587686.

Full text
Abstract:
This paper presents the mechanical properties and the microstructure of the high performance fiber reinforced concrete (HPFRC) containing up to 3% volume fraction of chopped Basalt fibers. Three types of the concrete were prepared, out of which, the first type was prepared by utilizing 100% cement content. The other two types of the concrete were prepared by replacing 10% cement content with silica fume and the locally produced metakaolin. Using each concrete type, four mixes were prepared in which Basalt fibers were added in the range of 0–3%; that is, total twelve mixes of the HPFRC concrete were prepared. From each of the twelve concrete mixes, total twelve specimens were cast to determine the mechanical properties of the HPFRC including compressive strength (cube and cylinder), splitting tensile strength, and the flexural strength. In this way, a total of 108 specimens were cast and tested in this study. Test results showed that the addition of the Basalt fibers significantly increased the tensile splitting strength and the flexural strength of the HPFRC, while there was slight improvement in the compressive strength with the addition of Basalt fibers. The microstructure of HPFRC was examined to determine the interfacial transition zone (ITZ) between the aggregates and the paste by using field emission scanning electron microscope (FESEM), which showed the improvement of the ITZ due to the addition of the Basalt fibers.
APA, Harvard, Vancouver, ISO, and other styles
5

Pradeeba, K., and A. Rajasekaran. "Analytical Predictions on Flexural Strengthening of Reinforced Concrete Beams with Hybrid FRP Laminate." International Journal of Engineering and Advanced Technology 11, no. 1 (October 30, 2021): 15–20. http://dx.doi.org/10.35940/ijeat.a3122.1011121.

Full text
Abstract:
This paper presents the predicted regression equation for the study parameters of Reinforced Concrete (RC) beams strengthened with Hybrid Fibre Reinforced Polymer (HyFRP) laminate at the soffit of beam. To study the effectiveness of HyFRP laminate on flexural strengthening a total of five beams were cast and tested.The variable parameters are thickness, elastic modulus and tensile strength of HyFRP laminates. Four combinations of HyFRP laminates precisely, 90% Glass fibre + 10% Basalt fibre of thickness, 80% Glass fibre + 20% Basalt fibre, 70% Glass fibre + 30% Basalt fibre, 60% Glass fibre + 40% Basalt fibre, and their corresponding thickness were 2.78, 3.24, 3.86 and 4.24mm respectively.The test results concluded that reinforced concrete beams strengthened with 70%Glass + 30%Basalt HyFRP laminate enhance the ultimate load carrying capacity of 68.97% with respect to control beam. The values reached through the predicted regression equation showed equitable accuracy with those of experimental values.
APA, Harvard, Vancouver, ISO, and other styles
6

Sreenatha Reddy, S., and R. Dhanasekaran. "Effect of fly ash and basalt on wrought and cast aluminum alloy." Materials Today: Proceedings 5, no. 13 (2018): 27112–17. http://dx.doi.org/10.1016/j.matpr.2018.09.018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ayyanar Raja, M., V. Manikandan, P. Amuthakkannan, S. Rajesh, and I. Balasubramanian. "Wear resistance of basalt particulate-reinforced stir-cast Al7075 metal matrix composites." Journal of the Australian Ceramic Society 54, no. 1 (September 25, 2017): 119–28. http://dx.doi.org/10.1007/s41779-017-0133-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Baronins, J., M. Antonov, R. Ivanov, V. Shuliak, and I. Hussainova. "Effect of basalt and silica additives on erosive wear resistance of cast ceramics." Proceedings of the Estonian Academy of Sciences 65, no. 2 (2016): 144. http://dx.doi.org/10.3176/proc.2016.2.05.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Popp, Ilie Octavian. "Analysis of the eigenfrequencies of the basalt machine parts by the FEM." MATEC Web of Conferences 343 (2021): 08002. http://dx.doi.org/10.1051/matecconf/202134308002.

Full text
Abstract:
The aim of this paper was to carry out a theoretical (numerical) scientific research on the behavior of cast and recrystallized basalt, in order to use it as a material in the manufacture of structural elements of machine tools. A unitary methodology has been established for studying the eigenfrequency of structural elements for machine tools by the finite element method. Two basalt structural elements (beam type and plate type) were modeled, which were also made physically, and with the help of the COSMOS / Mark finite element program, the eigenfrequencies of the models was studied.
APA, Harvard, Vancouver, ISO, and other styles
10

Anandakumar, R., M. S. Ravikumar, and C. Selvamony. "Mathematical Prediction for BFRP Retrofitted after Fatigue Loading of Concrete Specimens." JOURNAL OF ADVANCES IN CHEMISTRY 13, no. 10 (March 4, 2017): 5944–53. http://dx.doi.org/10.24297/jac.v13i10.5884.

Full text
Abstract:
This paper deals with the experiment investigations on the Basalt Fibre Reinforced Polymer composites wrapped concrete specimens for determining the mathematical prediction for retrofitting of concrete specimens. For the past three decades, fibres are being effectively utilized in engineering fields. Some countries do not have specified codes for structural designing of Fibre Reinforced Polymer composites. Especially for this situation, the mathematical predictions were determined by experimentally for Basalt Fibre Reinforced Polymer composites retrofitted concrete. For this experiment, cubes, cylinders and prisms were cast using M30 grade concrete to analyze the characteristic strengths. The tests were carried out with and without Basalt Fibre Reinforced Polymer wrapping and retrofitted after 0%, 30%, 60% and 90% fatigue loaded or preloaded specimens. The retrofitted specimens with Basalt Fibre Reinforced Polymer wrapping, even after 90% fatigue loaded possess higher strength than conventional one. The observed readings were analyzed and mathematical prediction was developed by using readings and graphical representations. From the study, similar results were observed through experiments and mathematical predictions.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Cast basalt"

1

Beck, Branislav. "Nízkoteplotní zkoušky a lomová houževnatost vybraných keramických materiálů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231786.

Full text
Abstract:
Diploma thesis deals with the determination of fracture toughness values of sintered silicon carbide and casted basalt using both the Single Edge V-Notch Beam (SEVNB) and the Chevron Notched Beam (CNB) methods at room and cryogenic temperatures. The first part of this thesis offers general overview and categorization of ceramic materials. Fracture mechanics of the ceramic materials and available fracture toughness testing methods are discussed in following chapters. The last section in the theoretical part is aimed to the microstructure and properties of the silicon carbide. Experimental part of the work summarizes methods used for characterization of selected materials from the microstructural and fracture point of view. Preparation of samples for microstructural observation and samples for fracture toughness determination are described in details. The results of the fracture toughness data for sintered silicon carbide and cast-basalt obtained at room temperature and at -100 °C are displayed. Consideration of possible measurements errors and application of various fracture toughness testing methods are discussed in the next chapter of this work. The difference in the fracture toughness values with the decrease of testing temperature was found. The difference depends on both, the used method of fracture toughness determination and the material used for the tests. The most important results gained during the experimental work are summarized in the chapter “Conclusions”.
APA, Harvard, Vancouver, ISO, and other styles
2

Mülâyim, Mehmet Oǧuz. "Anytime Case-Based Reasoning in Large-Scale Temporal Case Bases." Doctoral thesis, Universitat Autònoma de Barcelona, 2020. http://hdl.handle.net/10803/671283.

Full text
Abstract:
L'enfocament de la metodologia Casi-Based Reasoning (CBR) per a la resolució de problemes que "problemes similars tenen solucions similars" ha demostrat ser bastant favorable per a moltes aplicacions d'intel·ligència artificial industrial. No obstant això, els mateixos avantatges de CBR dificulten el seu acompliment ja que les bases de casos (CB) creixen més que mides raonables. Cercar casos similars és costós. Aquest desavantatge sovint fa que CBR sigui menys atractiu per als entorns de dades abundants d'avui dia, mentre que, en realitat, cada vegada hi ha més raons per beneficiar-se d'aquesta metodologia eficaç. En conseqüència, l'enfocament tradicional de la comunitat CBR de controlar el creixement de la CB per mantenir el rendiment està canviant cap a la recerca de noves formes de tractar amb dades abundants. Com a contribució a aquests esforços, aquesta tesi té com a objectiu accelerar el CBR aprofitant tant els espais de problemes com els de solucions en els CB de gran escala que es componen de casos relacionats temporalment, com en l'exemple de les històries clíniques electròniques. Per a les ocasions en què l'acceleració que vam aconseguir per obtenir resultats exactes encara no sigui factible, dotem el sistema CBR amb capacitats d'algoritmes anytime per proporcionar resultats aproximats amb confiança en cas d'interrupció. Aprofitar la temporalitat dels casos ens permet assolir guanys superiors en el temps d'execució per als CB de milions de casos. Els experiments amb conjunts de dades del món real disponibles públicament fomenten l'ús continu de CBR en dominis en els quals CBR històricament sobresurt com l'atenció mèdica; i al seu torn, no patint, sinó gaudint del big data.
El enfoque de la metodología Case-Based Reasoning (CBR) para la resolución de problemas de que "problemas similares tienen soluciones similares" ha demostrado ser bastante favorable para muchas aplicaciones de inteligencia artificial industrial. Sin embargo, las mismas ventajas de CBR dificultan su desempeño ya que las bases de casos (CB) crecen más que tamaños razonables. Buscar casos similares es costoso. Esta desventaja a menudo hace que CBR sea menos atractivo para los entornos de datos abundantes de hoy en día, mientras que, en realidad, cada vez hay más razones para beneficiarse de esta metodología eficaz. En consecuencia, el enfoque tradicional de la comunidad CBR de controlar el crecimiento de la CB para mantener el rendimiento está cambiando hacia la búsqueda de nuevas formas de tratar con datos abundantes. Como contribución a estos esfuerzos, esta tesis tiene como objetivo acelerar el CBR aprovechando tanto los espacios de problemas como los de soluciones en los CB de gran escala que se componen de casos relacionados temporalmente, como en el ejemplo de las historias clínicas electrónicas. Para las ocasiones en las que la aceleración que logramos para obtener resultados exactos aún no sea factible, dotamos al sistema CBR con capacidades de algoritmos anytime para proporcionar resultados aproximados con confianza en caso de interrupción. Aprovechar la temporalidad de los casos nos permite alcanzar ganancias superiores en el tiempo de ejecución para los CB de millones de casos. Los experimentos con conjuntos de datos del mundo real disponibles públicamente fomentan el uso continuo de CBR en dominios en los que CBR históricamente sobresale como la atención médica; y a su vez, no sufriendo, sino disfrutando del big data.
Case-Based Reasoning (CBR) methodology's approach to problem-solving that "similar problems have similar solutions" has proved quite favorable for many industrial artificial intelligence applications. However, CBR's very advantages hinder its performance as case bases (CBs) grow larger than moderate sizes. Searching similar cases is expensive. This handicap often makes CBR less appealing for today's ubiquitous data environments while, actually, there is ever more reason to benefit from this effective methodology. Accordingly, CBR community's traditional approach of controlling CB growth to maintain performance is shifting towards finding new ways to deal with abundant data. As a contribution to these efforts, this thesis aims to speed up CBR by leveraging both problem and solution spaces in large-scale CBs that are composed of temporally related cases, as in the example of electronic health records. For the occasions when the speed-up we achieve for exact results may still not be feasible, we endow the CBR system with anytime algorithm capabilities to provide approximate results with confidence upon interruption. Exploiting the temporality of cases allows us to reach superior gains in execution time for CBs of millions of cases. Experiments with publicly available real-world datasets encourage the continued use of CBR in domains where it historically excels like healthcare; and this time, not suffering from, but enjoying big data.
Universitat Autònoma de Barcelona. Programa de Doctorat en Informàtica
APA, Harvard, Vancouver, ISO, and other styles
3

Sowards, Kimberly Francis. "Weathering Sequence of Young Basalts: A Case Study from Kohala, Hawaii." BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6704.

Full text
Abstract:
Exposed weathering profiles of a series of Pololu lava flows in Kohala, Hawaii are ideal for investigating the sequence of reactions/reaction pathways of weathered basalt. Weathering reactions for saprolites show mineral sequences that include feldspar → halloysite ± gibbsite + solutes; clinopyroxene → hematite + minor halloysite + solutes; olivine → hematite + solutes; magnetite → hematite or other Fe-oxides/hydroxides. However, the presence of smectite in four samples suggests that smectite-group clays may form as short lived intermediates at the base of the weathering profile. Regionally, on Kohala, soils and saprolites are dominated by halloysite with small quantities of other clays such as kaolinite, gibbsite, and smectite. However, one horizon in the weathering profile at the study site in Kohala is dominated by gibbsite. Smectite is found at the base of the profile above impermeable areas where mass leaching has left increased alkaline and alkaline earth elemental (Mg, Ca, Na, and K) abundances relative to the parent rock. The amount of elemental gain varies from -5% to +75% for samples with smectite. Different climates generate different weathering profile depths. MASW (multi-channel analysis of surface waves) shows that the depth of the weathering profile is 15 meters. Seismic profiles correlate the depth of the weathering profile inland (~15 meters), with cliff face (~13 meters). Other than the gibbsite horizon, most mineral zones are too thin to be resolved through second-order velocity variations. P-wave reflection surveys are unsuitable for imaging the base of the weathering front because the transition to fresh rock may be gradational. However, within the saprolite section, boundaries between relict lava flow textures produce reflections that mimic expected stratigraphic patterns. Perpendicular to the shoreline, reflectors dip gently seaward, whereas parallel to the shoreline, lenticular packages of relict lava flows are observed.
APA, Harvard, Vancouver, ISO, and other styles
4

Donnerstrand, Paulina, and Andrea Alpsten. "Basal kroppskännedom som intervention hos individer med tinnitusbesvär : Experimentell single-case studie." Thesis, Mälardalens högskola, Akademin för hälsa, vård och välfärd, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-38884.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Herrera, Cáceres Carlos Antonio. "Modeling and predictive control of a cash concentration and disbursements system." Doctoral thesis, Universitat Autònoma de Barcelona, 2016. http://hdl.handle.net/10803/399516.

Full text
Abstract:
Esta tesis aborda el estudio de la Planificación financiera a corto plazo y la Gerencia de efectivo, a través del movimiento de dinero en las cuentas bancarias que participan en las decisiones financieras importantes de una empresa. La investigación se realiza en el marco de los modelos de planificación financiera corporativa, cuyo desarrollo se ha producido sobre todo en los últimos sesenta años. En particular, el trabajo se enfoca en los Sistemas de concentración de caja y desembolsos (CCDS), utilizados por las empresas para mejorar la planificación y el control de los activos corrientes y la Gerencia de efectivo. El objetivo de un CCDS es concentrar el efectivo disponible en una cuenta bancaria principal para hacer el mejor uso del dinero en grandes cantidades y, así, apoyar las operaciones de inversión y financiamiento. En consecuencia, la motivación principal de la tesis es lograr una representación exacta de un CCDS que permite su simulación numérica, análisis y evaluación, así como la posibilidad de nuevas investigaciones y el desarrollo de algoritmos para el soporte de decisiones financieras, basados en herramientas de la teoría de control. En este sentido, se presenta un modelo de simulación de un CCDS basado en ecuaciones en diferencias y técnicas de ingeniería de sistemas, incluyendo la existencia de retardos. Se supone la existencia de una cuenta principal operada de forma centralizada. La cual recibe transferencias de dinero desde las cuentas de ingreso de cada agencia de la empresa. También desde la cuenta principal, el dinero se transfiere hacia las cuentas de desembolso de las agencias para cubrir los sobregiros. El CCDS incluye también una cuenta de inversión para aprovechar los excedentes de efectivo y una línea de crédito para cubrir los déficits de caja. Adicionalmente, se deriva un modelo equivalente representado por ecuaciones algebraicas usando la transformada Z, posibilitando el uso de técnicas rigurosas de control en el campo financiero. Bajo un enfoque descentralizado sobre el modelo del CCDS, se desarrolla un modelo de control predictivo (MPC) para una cuenta de ingresos, cuya aplicación se extiende a todas las agencias del sistema. Se utiliza Programación dinámica (DP) para el modelo de predicción que, a su vez, incluye un modelo de pronóstico estándar para la incertidumbre. EL MPC se simplifica procurando aliviar algunos de los problemas conocidos cuando DP se aplica bajo incertidumbre. También, se establece un sistema de bandas para la incertidumbre, limitando la entrada del modelo de DP, junto con un regulador de estabilización en forma de cascada que utiliza una ganancia de realimentación lineal. Esta combinación permite determinar un intervalo para la estabilidad del sistema indistintamente del tamaño del horizonte de predicción. La señal de referencia es una función de diente de sierra, que se adapta convenientemente a la política de inventario aplicada. La tesis muestra, en teoría y por medio de simulaciones, que el controlador propuesto cumple su objetivo. Por otra parte, se realiza una adaptación del MPC de la cuenta de ingresos, agregándole tiempo de retardo al modelo, con el propósito de utilizarlo para el control de las cuentas de desembolso. En consecuencia, se ofrecen dos propuestas de MPC para el problema de la cobertura de sobregiro. Por último, se presenta un caso de estudio utilizando datos hipotéticos para probar el modelo de simulación del CCDS. La ejecución del modelo ha permitido realizar un análisis exhaustivo de los resultados mostrando sus potencialidades y la versatilidad para adaptarse a diferentes escenarios realistas. Esta investigación abre un abanico de posibilidades para futuras investigaciones en las que se combinan las técnicas y teorías de la ingeniería de sistemas y de control, aplicados al ámbito financiero corporativo.
This thesis addresses the study of cash management and short-term financial planning through the movement of money in bank accounts involved in the important financial decisions of a firm. The research is carried within the framework of models for corporate financial planning, whose development has mostly occurred in the last sixty years. Particularly, the work focuses on the Cash Concentration and Disbursements Systems (CCDS), which are used by firms for the purpose of improving the planning and control of current assets and cash management. The aim of a CCDS is to concentrate available cash in a main bank account in order to make best use of money in large amounts to support investment and financing operations. Consequently, the main motivation of the thesis is to achieve an accurate representation of a CCDS, allowing its numerical simulation, analysis and evaluation, as well as the subsequent possibility of exploring new researches and the development of algorithms for the financial decisions support, based on tools of control theory. In this regard, a simulation model of a CCDS seen as an inventory management system is presented, based on difference equations and systems engineering techniques including the existence of delays due to banking procedures. The model assumes the existence of a centrally operated main account. This account receives money transfers from the revenue accounts of each agency. Also from the main account, money is transferred to the agencies' disbursements accounts in order to cover overdrafts. There exist an investment account into which any cash surpluses of the main account are deposited and a credit line in order to avoid the cash deficits. The operating rules for the CCDS are defined, and income and financial costs involved are considered. The model represents the flow of money between the identified elements of the system and the flow of money requirements or transfer orders. An equivalent model represented by algebraic equations through the Z-transform is derived, which allows using rigorous control techniques in the field of finance. Based on a decentralized approach on the model of the CCDS, a Model Predictive Control (MPC) for a revenue account is developed, which is applied to all agencies. Dynamic Programming (DP) is used for the prediction model by including a standard forecasting model for uncertainty. Simplifications of the MPC are included seeking alleviate some of the known problems when DP is applied under uncertainty. Moreover, a band for the uncertainty is established to narrow the input of the DP model, together with a stabilizing regulator in cascade fashion using a linear feedback gain (closed-loop). This combination allows determining a range for the system stability regardless of the size of the prediction horizon. The reference signal used is a sawtooth function, which conveniently adapts to the inventory policy applied. Theoretically, and through simulation, it is shown that the proposed controller meets the control objective. The MPC of the revenue account is adapted by adding delay time in order to be used for disbursement accounts. Accordingly, two proposals of a model predictive control are provided on the overdraft coverage problem. Finally, a case study is presented using hypothetical data in order to test the simulation model of the CCDS. Running the model allows performing a comprehensive analysis of results showing its potentialities and the versatility to suit different realistic scenarios. This research opens up a range of possibilities for further research in which techniques and theories of systems engineering and control are combined, applied to corporate financial field.
APA, Harvard, Vancouver, ISO, and other styles
6

Loehne, Cornelia. "Molecular phylogenetics and historical biogeography of basal angiosperms a case study in Nymphaeales /." [S.l.] : [s.n.], 2007. http://deposit.ddb.de/cgi-bin/dokserv?idn=983926468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Berjaga, Moliné Xavier. "Case-based diagnosis of batch processes based on latent structures." Doctoral thesis, Universitat de Girona, 2013. http://hdl.handle.net/10803/126303.

Full text
Abstract:
The aim of this thesis is to present a methodological approach for the automatic monitoring of batch processes based on a combination of statistical models and machine learning methods. The former is used to model the process based on the relationships among the different monitored variables throughout time, while the latter is used to improve the diagnosis capabilities of the system. Statistical methods do not relate faulty observations with its root cause (they only list the subset of variables whose behaviour has been altered) and they lack of learning capabilities. By using case-based reasoning (CBR) for the diagnosis, faulty observations can be associated with more significant information (like causes). Statistical models also provide a new representation of the observations, on an orthogonal basis, that improves the use of the distance-based approaches of the CBR, giving a better performance
L'objectiu d'aquesta tesi és la de presentar un mètode automàtic per al monitoratge dels processos per lots basat en la combinació de models estadístics i mètodes d'aprenentatge automàtic. El primer s'utilitza per modelar el procés mitjançant les relacions més significatives entre les variables mesurades al llarg del temps, mentre que el segon s'utilitza per millorar la capacitat de diagnosi del sistema. Els mètodes estadístics no relacionen una observació amb falla amb l'origen d'aquesta al mateix temps que no tenen capacitat d'aprenentatge. El fet d'utilitzar raonament basat en casos per a la diagnosi permet relacionar les observacions amb falla amb informació més significativa (com seria la causa de la falla). Els models estadístics també proporcionen una nova representació de les observacions, en una base ortogonal, que facilita l'aplicabilitat dels mètodes basats en distàncies del raonament basat en casos, tot millorant-ne els resultats obtinguts
APA, Harvard, Vancouver, ISO, and other styles
8

Grachten, Maarten. "Expressivity-aware tempo transformations of music performances using case based reasoning." Doctoral thesis, Universitat Pompeu Fabra, 2006. http://hdl.handle.net/10803/7485.

Full text
Abstract:
La recerca presentada en aquesta dissertació glossa sobre transformacions de tempo de gravacions monofòniques de saxo jazz preservant l'expressivitat musical. Es una contribució al processament d'audio basat en el contingut, un camp de recerca que ha emergit recentment com a resposta a la necessitat creixent de gestionar intel·ligentment la creixent quantitat d'informació digital multimedia disponible actualment. S'ha investigat com una execució musical, tocada a un tempo concret, es pot reproduir automàticament a un altre tempo mantenint l'expressivitat. Aquest problema no es pot reduir a aplicar una transformació uniforme a totes les notes de la melodia, operació que degradaria la qualitat de l'execució. Proposem un sistema de raonament basat en casos per a transformacions de tempo preservant l'expressivitat. La validació del sistema mostra un comportament superior a la transformació uniforme. A m'es, s'han fet contribucions a l'anàlisi de gravacions expressives, CBR, recuperació de melodies i metodologires d'evaluació de models d'expressivitat.
The research presented in this dissertation focuses on expressivity-aware tempo transformations of monophonic audio recordings of saxophone jazz performances. It is a contribution to content-based audio processing, a field of technology that has recently emerged as an answer to the increased need to deal intelligently with the evergrowing amount of digital multimedia information available nowadays. We have investigated the problem of how a musical performance played at a particular tempo can be rendered automatically at another tempo, while preserving naturally sounding expressivity. This problem cannot be reduced to just applying a uniform transformation to all notes of the melody, since it often degrades the musical quality of the performance. We present a case-based reasoning system for expressivity aware tempo transformations. A validation of the system showed superior results compared to uniform transformation. Furthermore, contributions have been made to expressive performance analysis, CBR, melody retrieval, and evaluation methodologies of expressive models.
APA, Harvard, Vancouver, ISO, and other styles
9

Cavalluzzo, Matteo. "Tracking indoor basato su beacon: Trauma Tracker come caso di studio." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/15522/.

Full text
Abstract:
L'obiettivo del progetto è la realizzazione di un sistema di tracciamento della posizione in ambienti indoor utilizzando i beacon partendo dai requisiti di Trauma Tracker, che richiede un sistema in grado di determinare la posizione corrente di una persona che si muove con un dispositivo android all'interno di un ambiente in cui sono stati posizionati dei beacon. Nel primo capitolo viene definito il tracciamento indoor, con esempi e le principali caratteristiche. Nel secondo vengono trattate le principali tecnologie utilizzate. Il terzo capitolo approfondisce la tecnologia dei beacon Bluetooth. Il quarto capitolo introduce Trauma Tracker e gli obiettivi del progetto. Il quinto capitolo si descrive la progettazione e l'implementazione di un'applicazione per il monitoraggio della posizione e dei beacon nelle vicinanze utilizzando la libreria Android Beacon Library, con i test e i risultati ottenuti. Infine nell'ultimo capitolo espone come è stata eseguita l'implementazione del suo core di tracciamento all'interno di Trauma Tracker.
APA, Harvard, Vancouver, ISO, and other styles
10

Oh, Il-Chan. "Comparative Seed Morphology and Phylogenetics : Case Studies in Basal Angiosperms (ANITA) and Asterids (Lysimachia, Ericales)." Doctoral thesis, Uppsala universitet, Systematisk biologi, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-100372.

Full text
Abstract:
The first half of the thesis deals with the seed morphology of members of the ANITA grade at the base of the angiosperm phylogeny (Amborella, Nymphaeales, Illiciales, Trimeniaceae, and Austrobaileyaceae), especially Illiciaceae and Schisandraceae. Seed characters support a major division between the New World and Old World species of Illicium. Fossil seeds previously assigned to Illiciaceae were re-evaluated. In Schisandraceae, seed and leaf epidermal characters were added to a previously published morphological data matrix. Phylogenetic analysis using the extended data matrix shows that Kadsura and Schisandra appear to be supported as monophyletic sister taxa by a number of synapomorphies in reproductive and vegetative characters. Fossil seeds from the Eocene of North America show some similarities to the modern Schisandra glabra from North America, whereas fossils from Europe are more similar to modern Asian species. In the second half of the thesis, seed morphology of Lysimachia and closely related taxa (Anagallis, Ardisiandra, Asterolinon, Glaux, Pelletiera, Trientalis) was investigated. The phylogenetic relationships among the endemic Hawaiian species of Lysimachia was also studied, using nuclear ribosomal DNA (ETS, ITS) and chloroplast DNA (rpl16, rpl20-rps12, rps16, trnH-psbA, trnS-G) sequence data. The seeds in Lysimachia and related taxa vary in, e.g., shape, seed coat structure and surface patterns. Seed surface patterns are mostly congruent with molecular phylogenetic relationships. A reticulate surface pattern is diagnostic for, e.g., the subgenus Palladia and the Hawaiian endemic subgenus Lysimachiopsis. Mapping seed characters onto a recent molecular-based phylogenetic tree, reveals that they provide potentially synapomorphic character states for various subclades of Lysimachia. The phylogenetic analysis based on the combined data set using nuclear ribosomal DNA and chloroplast DNA data provides new insights into the relationships within the Hawaiian subgenus Lysimachiopsis. Here our results indicate that earlier taxonomic treatments of the group need to be partially revised.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Cast basalt"

1

Basalto da casa: Poema. Lisboa: Escritor, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Condena perpetua: Basada en el Caso Rocío Cigarreta. Buenos Aires: Ediciones Corregidor, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Southern Africa Multidisciplinary Advisory Team., ed. Coping with extreme poverty through traditional skills: The case of the xirundzu basket makers of Mozambique. Harare, Zimbabwe: International Labour Office, Southern Africa Multidisciplinary Advisory Team, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cerrillo, Quintina Martín-Moreno. Desarrollo organizativo de los centros educativos basado en la comunidad. Madrid: Sanz y Torres, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gill, Janet. Basket Weaver and Catches Many Mice. New York: Knopf, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

ill, Choi Yangsook, ed. Basket Weaver and Catches Many Mice. New York: Knopf, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Abbott, Maude E. The determination of basal metabolism by the "respiratory-valve and spirometer method" of indirect calorimetry with an observation on a case of polyeythaemia with splenomegaly / by Maude E. Abbott. [Canada?: s.n., 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cáceres, Eduardo. Haciendo realidad nuestros derechos: Aprendizajes de la aplicación del enfoque de desarrollo basado en derechos. [Perú]: CARE, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Moritán, Matilde García. Campo Verde: Un proyecto urbano basado en la auto-organización : un sueño hecho realidad. San Salvador de Jujuy, Argentina: Ediciones Culturales "San Salvador" de la Municipalidad de San Salvador de Jujuy, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Heiniger, Kevin, and Kevin Heiniger. Schwarze Kunst: Bilder in Eisenguss 1500 bis 1800. Basel: Historisches Museum Basel, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Cast basalt"

1

Reich, Danya, Corinna Eleni Psomadakis, and Bobby Buka. "Basal Cell Carcinoma." In Top 50 Dermatology Case Studies for Primary Care, 43–48. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-18627-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Balthazar, Laurent. "Scoring Systems: Case Study." In From Basel 1 to Basel 3, 145–87. London: Palgrave Macmillan UK, 2006. http://dx.doi.org/10.1057/9780230501171_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pincus, Jonathan, and Rizal Ramli. "Indonesia: From Showcase to Basket Case." In Financial Liberalization and the Asian Crisis, 124–39. London: Palgrave Macmillan UK, 2001. http://dx.doi.org/10.1057/9780230518629_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Okada, Satoshi, Yoshio Nakagawa, and Kimiyoshi Hirakawa. "Syringomyelia Extending to the Basal Ganglia: Case report." In Annual Review of Hydrocephalus, 123. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-662-11158-1_80.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cunningham, Lisa. "“What’s in the Basket?”: Sexualized and Sexualizing Violence in Frank Henenlotter’s Basket Case." In Screening the Dark Side of Love, 145–58. New York: Palgrave Macmillan US, 2012. http://dx.doi.org/10.1057/9781137096630_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pillai, Anup R., and Dhananjay A. Jolhe. "Market Basket Analysis: Case Study of a Supermarket." In Advances in Mechanical Engineering, 727–34. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3639-7_87.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Black, Keith H. "Case Studies in Hedge Fund Operational Risks: From Amaranth to Wood River." In Operational Risk toward Basel III, 435–52. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118267066.ch21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Smith-Frigerio, Sarah, and J. Brian Houston. "Crazy, Insane, Nut Job, Wacko, Basket Case, and Psycho." In President Donald Trump and his Political Discourse, 114–30. New York, NY: Routledge, 2019.: Routledge, 2018. http://dx.doi.org/10.4324/9781351038782-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xie, Dong-Lin, Tam H. Nguyen, and Robert A. Norman. "Case 19: Left Mandible Skin, R/O Basal Cell Carcinoma vs. Cyst." In Clinical Cases in Dermatopathology, 121–27. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-28807-5_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bonini, Stefano, and Giuliana Caivano. "Development of a LGD Model Basel2 Compliant: A Case Study." In Mathematical and Statistical Methods for Actuarial Sciences and Finance, 45–48. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05014-0_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cast basalt"

1

Greene, Kevin A. "Design Note on Post-Tensioned Cast Basalt." In Ninth Biennial Conference on Engineering, Construction, and Operations in Challenging Environments. Reston, VA: American Society of Civil Engineers, 2004. http://dx.doi.org/10.1061/40722(153)7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sengupta, S. "Understanding The Mesozoics Beyond Basalt: A Case Study Of Sub-Basalt Imaging." In Digital Technical Conference. Indonesian Petroleum Association, 2020. http://dx.doi.org/10.29118/ipa20-g-434.

Full text
Abstract:
The Deccan Volcanic Province of India is considered as one of the largest basalts-covered regions in the world, formed due to extensive outpouring of basaltic lavas during Deccan volcanism (∼65 Ma). The sedimentary sequence below the flood basalt is mainly characterized by Mesozoic strata with a varying thickness of 1000 m to 2500 m. It is considered that requisite heat generation due to Deccan Trap volcanism soon after the Cretaceous sedimentation may have acted as a catalyst in hydrocarbon potential in this area (Vardhan et al. 2008). However, it is essentially unexplored because of the limitations of conventional marine streamer P-wave seismic acquisition in imaging the structures both intra-basalt and sub-basalt. The major challenges can be considered as follows: Strong reflections due to high impedance contrasts at the top (and bottom) of the basalts leading to significant loss of transmitted seismic energy; Scattering of energy due to large acoustic impedance contrast at top and bottom of the basalt; Generation of multiples, both surface-related and interbed, from the top and bottom of the basalt, and intra-basalt boundaries, masking genuine primary reflections at the pre-basasediments; Significant attenuation of seismic energy in the basaltic sequences due to its complex internal structure generally causing weak sub-basasignal; Low signal-to-noise ratio creating ambiguity in estimating accurate velocity model of subsurface. This case study demonstrates that, even with legacy marine streamer surveys, an appropriate workflow of combining suitable advanced technologies can help to overcome the long-standing challenges of sub-basalt imaging. The reprocessed data show clear uplift in the sub-basalt imaging and the inversion results validate the quality of the new data in relation to the well logs.
APA, Harvard, Vancouver, ISO, and other styles
3

Sengupta, S., S. Goswami, G. Menzel Jones, B. Chowdhury, A. Sazykin, A. Mukherjee, M. Afia, et al. "Uncovering the Potential Reservoir Beyond Basalt, Kutch Offshore: A Case Study of Sub-Basalt Imaging." In 82nd EAGE Annual Conference & Exhibition. European Association of Geoscientists & Engineers, 2020. http://dx.doi.org/10.3997/2214-4609.202011460.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Iñiguez Flores, Roberto, and Ruth Maribel León Morán. "El Diseño Avanzado como práctica sistémica para la innovación en el territorio: caso Ciudad Creativa Digital, Guadalajara, México." In Systems & Design: Beyond Processes and Thinking. Valencia: Universitat Politècnica València, 2016. http://dx.doi.org/10.4995/ifdp.2016.3728.

Full text
Abstract:
El Diseño Avanzado es una práctica orientada a la búsqueda y visualización de oportunidades de de innovación futuras, una práctica que si se realiza sistemáticamente, crea corredores de innovación para las empresas que trabajan bajo el concepto de innovación contínua.Estas prácticas han sido documentadas, en especial cuando se trata de su aplicación en la innovación territorial, de manera que se hace crucial para las regiones entender la complejidad implícita en estas dinámicas, así como el nuevo rol del diseñador,´pues su labor, aparace en etapas tempranas en las cuales, la anticipación, el diseño estratégico y la sistémica aplicada, juegan un papel fundamental en la identificación de oportunidades de desarrollo y aporte de valor para el territorio.En tal sentido, el presente artículo tiene como objetivo, disertar sobre estos fundamentos a través de la exposición de un caso específico: Ciudad Creativa Digital, proyecto de ciudad inteligente que suma los objetivos de renovación del entorno urbano de la Ciudad de Guadalajara, con la creación e impulso de la industria creativa en México. La metodología utilizada para tal fin, se basa en el análisis sistémico de los diferentes actores y variables que intervienen en el caso. Los resultados obtenidos como producto de interrelaciones del sistema, son la configuración de mapas o rutas que nuestran áreas de oportunidad para la innovación en una localidad determinada; situada dentro de una economía emergente que evoluciona de una estrategia de desarrollo económico basado en la manufactura, a una estrategia basada en el diseño y la innovación, con la creación de regiones del conocimiento y ciudades inteligentes.DOI: http://dx.doi.org/10.4995/IFDP.2016.3728
APA, Harvard, Vancouver, ISO, and other styles
5

von Fournier, A., A. Scherzad, S. Hackenberg, and R. Hagen. "Metastastatic basal cell carcinoma – A case report." In Abstract- und Posterband – 91. Jahresversammlung der Deutschen Gesellschaft für HNO-Heilkunde, Kopf- und Hals-Chirurgie e.V., Bonn – Welche Qualität macht den Unterschied. © Georg Thieme Verlag KG, 2020. http://dx.doi.org/10.1055/s-0040-1711008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Misra, K. S., and Anshuman Misra. "Hydrocarbon Exploration in Sub-Basalt Basins- Case studies from Peninsular India." In International Geophysical Conference, Qingdao, China, 17-20 April 2017. Society of Exploration Geophysicists and Chinese Petroleum Society, 2017. http://dx.doi.org/10.1190/igc2017-016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Huusgard, Palli, Alberto Caycedo, Mingdong Cai, and Smith Bits. "Diamond-Impregnated Drillbit Performance in the Lower Basalt Series Offshore the Faroe Islands. A Case Study Based on Basalt Outcrop Testing." In SPE North Africa Technical Conference and Exhibition. Society of Petroleum Engineers, 2015. http://dx.doi.org/10.2118/175880-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ahís Adell, Maria. "Proyecto reflexivo de co-evaluación y auto-evaluación formativa utilizando la técnica del Puzzle de Aronson dentro del Aprendizaje Cooperativo." In IN-RED 2020: VI Congreso de Innovación Educativa y Docencia en Red. Valencia: Universitat Politècnica de València, 2020. http://dx.doi.org/10.4995/inred2020.2020.11984.

Full text
Abstract:
El presente estudio tiene por objetivo la evaluación del proceso de enseñanza-aprendizaje de EF, mediante la comparación de las percepciones del alumnado de dos cursos de primero de Bachillerato y sus dos respectivos profesores/as. Se trata de un estudio de caso, basado en técnicas de investigación cualitativas: entrevistas semiestructuradas, observación participante y general y una innovación competencial cooperativa basada en el Puzzle de Aronson. Los resultados muestran la existencia de una distancia entre la definición teórica del objetivo de la asignatura y la aplicación de esta en el aula. Este hecho se ve condicionado por limitaciones del contexto educativo, pero también por limitaciones profesionales de las cuáles no siempre se tiene consciencia
APA, Harvard, Vancouver, ISO, and other styles
9

Tang, Yu-Geng, and Gordon Tung-Chin Kung. "Probabilistic Analysis of Excavation-Induced Basal Heave-a Case Study." In 5th Asian-Pacific Symposium on Structural Reliability and its Applications. Singapore: Research Publishing Services, 2012. http://dx.doi.org/10.3850/978-981-07-2219-7_p301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Seneris, A., and JT Luna. "EP1186 Basal cell carcinoma of the vulva: a case report." In ESGO Annual Meeting Abstracts. BMJ Publishing Group Ltd, 2019. http://dx.doi.org/10.1136/ijgc-2019-esgo.1225.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cast basalt"

1

Gladden, Joseph R., James Tulenko, Lingyu Yu, and Haori Yang. Multimodal Nondestructive Dry Cask Basket Structure and Spent Fuel Evaluation. Office of Scientific and Technical Information (OSTI), December 2018. http://dx.doi.org/10.2172/1492003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Smith, Barton L. Validation Experiments for Spent-Fuel Dry-Cask In-Basket Convection. Office of Scientific and Technical Information (OSTI), August 2016. http://dx.doi.org/10.2172/1329191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brown, Jeffrey, and Richard Dye. Illinois Pensions in a Fiscal Context: A (Basket) Case Study. Cambridge, MA: National Bureau of Economic Research, June 2015. http://dx.doi.org/10.3386/w21293.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Graves, C. E. ,. Fluor Daniel Hanford. Evaluation of cast carbon steel and aluminum for rack insert in MCO Mark 1A fuel basket. Office of Scientific and Technical Information (OSTI), March 1997. http://dx.doi.org/10.2172/326414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pérez Pérez, Edgar Selvin, Lucia Benavidades, and Marai El Fassi. Efectividad de la Adaptación basada en Ecosistemas El caso del Sistema Milpa+Papa+Ovinos+Bosque en la microcuenca San Francisco. TMG Research gGmbH, March 2021. http://dx.doi.org/10.35435/1.2021.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pérez Pérez, Edgar Selvin, Marai El Fassi, and Lucia Benavidades. Efectividad de la Adaptación basada en Ecosistemas Estudio de caso del Plan de Manejo de la Subcuenca del Río Pasabién. TMG Research gGmbH, March 2021. http://dx.doi.org/10.35435/1.2021.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Alegria Salazar, Wilmer Johan. Dirección estrategica basada en balanced scoredcard en la gestion del mantenimiento: caso empresa de manufactura. Universidad Nacional Abierta y a Distancia, May 2021. http://dx.doi.org/10.22490/ecacen.4708.

Full text
Abstract:
Sin lugar a dudas el mantenimiento industrial tiene una gran participación en el proceso de dirección estratégica de cualquier organización sin importar su naturaleza, en la actualidad los directivos adquieren el gran desafío de mostrar el mantenimiento como una inversión en activos y no como un gasto; lo que se traduce en buscar mejores herramientas que permitan identificar las mejores maniobras para alcanzar la meta y por supuesto que pueda ser medible a partir de una serie de aspectos específicos del área. Hablar de dirección estratégica es hablar de balanced scorecard; su enfoque que solo busca integrar la estrategia y la evaluación del negocio ha mostrado ser productora de grandes resultados. La herramienta BSC crea un vínculo permanente entre cuadro dimensiones críticas para el éxito de cualquier organización; las finanzas, los clientes, el aprendizaje y crecimiento, finalmente el negocio interno. La inmersión de una empresa a nuevos mercados y la globalización de los negocios exigen que se aborden nuevas formas de armar las estrategias empresariales.
APA, Harvard, Vancouver, ISO, and other styles
8

Bryan, Charles R. Analysis of Corrosion Residues Collected from the Aluminum Basket Rails of the High-Burnup Demonstration Cask. Office of Scientific and Technical Information (OSTI), March 2017. http://dx.doi.org/10.2172/1346335.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Stein, Ernesto, and Lilia Stubrin. Competitividad, desarrollo productivo y mejora burocrática: El caso de la Secretaría de Simplificación Productiva de Argentina. Inter-American Development Bank, March 2021. http://dx.doi.org/10.18235/0003134.

Full text
Abstract:
La desburocratización y la simplificación de trámites son una materia pendiente en América Latina donde el Estado tiende a vincularse con las empresas, y los ciudadanos en general, a través de procedimientos complicados, largos y hasta muchas veces poco transparentes. En las últimas décadas, sin embargo, en asociación con el avance de la digitalización, han comenzado a realizarse esfuerzos en países de la región por lograr una simplificación de los trámites de la administración pública. Esta nota técnica documenta las prácticas y políticas de desburocratización y simplificación llevadas a cabo desde el Estado Nacional en Argentina en el periodo 2018-2019. La nota se basa en la experiencia de la Secretaría de Simplificación Productiva (SSP) del Ministerio de Producción, la cual lideró un proceso de simplificación con el objetivo primario de mejorar la competitividad y la integración de emprendedores y empresas al entramado productivo. Este caso permite aportar nueva evidencia sobre el accionar de este tipo de procesos en la región y extraer lecciones aprendidas que puedan ser de utilidad tanto para Argentina como para otros países.
APA, Harvard, Vancouver, ISO, and other styles
10

Freiría, Heber, Alejandro Nin Pratt, and Gonzalo Muñoz. Productividad y eficiencia en la producción ganadera pastoril en América Latina: Los casos de Bolivia y Colombia. Inter-American Development Bank, March 2021. http://dx.doi.org/10.18235/0003150.

Full text
Abstract:
El estudio examina el desempeño de la producción ganadera en Bolivia y Colombia. Se trata de dos ganaderías con diferente trayectoria, madurez tecnológica, y desempeño productivo, y que tienen en común la existencia de “frontera agrícola”, es decir, cambios de uso del suelo que permiten incorporar tierras de pastoreo a la ganadería, a partir de bosques. En el caso de Bolivia, el estudio se limitó a la región oriental, compuesta por los departamentos de Beni y Santa Cruz, que concentra la mayor parte del inventario ganadero del país. Beni, el departamento tradicionalmente ganadero, muestra estancamiento en el período, en lo que respecta al inventario ganadero y la productividad. No han existido inversiones ni cambio técnico importantes en materia de alimentación y manejo del ganado. En Santa Cruz se ha producido un incremento importante de la producción en la primera mitad del período, con aumentos de productividad basados en el cambio técnico. Este cambio técnico se asocia a la implantación de pasturas, a partir de cambios en el uso del suelo. El crecimiento observado en Santa Cruz, en la primera mitad del período (hasta 2012) se detiene a partir de ese año, y la productividad de los factores decrece, dando como resultado un aumento de productividad casi nulo en el total del período analizado. El cambio técnico operado, basado en un modelo de cambio de uso del suelo con siembra de pastos, en competencia por la tierra con soja y otros cultivos, mostró su potencial de generar crecimiento, pero no fue capaz de sostenerlo. La ganadería colombiana muestra un importante incremento de producción en el período analizado. Puesto que los factores de producción (básicamente tierra e inventario ganadero), se incrementan en menor proporción, se verifica un considerable incremento en la productividad de los factores. Existe heterogeneidad en el desempeño entre rubros y regiones. La ganadería de leche es muy importante en Colombia, y predomina en regiones de trópico alto, relativamente maduras en tecnología. Al analizar la evolución de la productividad de los factores, sin embargo, la tasa de crecimiento es mayor en las regiones en que predomina la ganadería de carne. Incluso se verifica cierta sustitución entre rubros, con avance de la producción de carne en todas las regiones. El crecimiento se asocia a mejoras en nutrición del ganado, por siembra de pastos, y en menor medida suministro de suplementos. El diferente comportamiento de los rubros se refleja en su diferente capacidad de competir ante la producción importada, en la medida que la protección se reduce en el marco de los acuerdos comerciales suscritos por el país. La producción ganadera pastoril tiene a su vez implicancias ambientales Los análisis realizados en este estudio, muestran que una variable determinante de la intensidad de emisiones es la productividad de los factores. Debido a esto, la ganadería colombiana presenta menores intensidades de emisión, y con reducción a tasas mayores que las del oriente boliviano. Otro aspecto decisivo en el balance de GEI está dado por los cambios en uso del suelo asociados a la ganadería. Si la producción ganadera que reemplaza bosques no lo hace con alta productividad, el balance resultante afectará en mayor medida el desempeño ambiental de la ganadería de los países.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cast basalt' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography