Log in

Relevant bibliographies by topics / CATIA V5 R24 / Journal articles

To see the other types of publications on this topic, follow the link: CATIA V5 R24.

Journal articles on the topic 'CATIA V5 R24'

Author: Grafiati

Published: 4 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 33 journal articles for your research on the topic 'CATIA V5 R24.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Mr.Suraj, S.Jadhav*1 Prof.E.N.Aitavade2 Mr.Azhar S.Mulla3. "DESIGN AND ANALYSIS OF TRACTOR TROLLEY AXLE USING FEA." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 8, no. 6 (2019): 184–95. https://doi.org/10.5281/zenodo.3256081.

Full text

Abstract:

In India, various small scale industries are adopting the crude methodologies for designing and manufacturing the machine components. One such industry producing tractor trolleys for agricultural use has been identified for this study. In the present market condition, various instruments or products used in agricultural areas are mostly manufactured in small   scale industries such as farming machinery, thrashers, tractor trolleys etc. These products are manufactured as per requirement, by trial and error methods or thumb rule methods of manufacturing, which leads to unwanted extra w

APA, Harvard, Vancouver, ISO, and other styles

2

Panchal, Dileep. "The Evaluation of Structural Analysis on Bicycle Frame using Steel Alloy and Titanium Alloy." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 693–700. http://dx.doi.org/10.22214/ijraset.2021.34936.

Full text

Abstract:

Analysis of Bicycle Frame by using 3D CAD MODELLING TOOL In this project we are going to design Bicycle Frame by using 3D CAD Modelling tool i.e., CATIA V5 R20.After completion of design we are going to do structural analysis on frame with the use of existing material and proposed material and we’ll conclude why the proposed material better than the existing material.

APA, Harvard, Vancouver, ISO, and other styles

3

GAIKWAD, RUSHIKESH B., and ABHAY V. GAUR. "STATIC AND DYNAMIC ANALYSIS OF SHAFT (EN24) OF FOOT MOUNTING MOTOR USING FEA." IJIERT - International Journal of Innovations in Engineering Research and Technology 5, no. 6 (2018): 57–70. https://doi.org/10.5281/zenodo.1445901.

Full text

Abstract:

<strong>This paper is about static and dynamic analysis of f oot mounted motor which is also known as (EN24) type moto r by using FEA software ANSYS 14.5 and modeling is done with help of CATIA V5 R20. This is the special problem which is observed by Laxmi Hydraulics Pvt. Ltd Solapur,Maharashtra,India. They have reported frequent failures of this type of Shaft .</strong> <strong>https://www.ijiert.org/paper-details?paper_id=141301</strong>

APA, Harvard, Vancouver, ISO, and other styles

4

Sharma, Shubham, and Ahmed J. Obaid. "Design and Analysis of Metal Expansion bellows under Axial and Transverse loadsusing CATIA V5 R21 software." IOP Conference Series: Materials Science and Engineering 1145, no. 1 (2021): 012054. http://dx.doi.org/10.1088/1757-899x/1145/1/012054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Meesala, Vanajakshi, V. V. Satyanarayana Pothuraju., and Lakshmi Devi E. "Static Structural Analysis of Vented and Non Vented Disc Brake." International Journal of Trend in Scientific Research and Development 3, no. 5 (2019): 721–27. https://doi.org/10.5281/zenodo.7928784.

Full text

Abstract:

The current study essentially deals with the modeling and analyzing vented and non vented disc brake by CATIA and ANSYS. Finite element models of the brake-disc are shaped with CATIA and simulated using ANSYS which is based on the finite element method. This study Structural analysis is done so as to get the strength of the disc brake. Here we discuss disc brake which is used in many vehicles. The stresses and variations developed in vented and non-vented disc brakes are discussed using ANSYS software. Disc gets stressed when used in slowing down or stopping the vehicle. So that by using Ansys

APA, Harvard, Vancouver, ISO, and other styles

6

Meesala, Vanajakshi, V. V. Satyanarayana Pothuraju., and Lakshmi Devi E. "Static Structural Analysis of Vented and Non Vented Disc Brake." International Journal of Trend in Scientific Research and Development 3, no. 5 (2019): 721–27. https://doi.org/10.5281/zenodo.3591015.

Full text

Abstract:

The current study essentially deals with the modeling and analyzing vented and non vented disc brake by CATIA and ANSYS. Finite element models of the brake disc are shaped with CATIA and simulated using ANSYS which is based on the finite element method. This study Structural analysis is done so as to get the strength of the disc brake. Here we discuss disc brake which is used in many vehicles. The stresses and variations developed in vented and non vented disc brakes are discussed using ANSYS software. Disc gets stressed when used in slowing down or stopping the vehicle. So that by using Ansys

APA, Harvard, Vancouver, ISO, and other styles

7

Jadhav, Ashish R., Aniket P. Jagtap, Nandini G. Jagtap, Rutav S. Surve, and Prof A. P. Kaldate. "Vibration Analysis of Composite Internal Door Panel of a Car." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (2022): 2011–15. http://dx.doi.org/10.22214/ijraset.2022.42731.

Full text

Abstract:

Abstract: The main objective behind this paper is to develop a suitable model of internal door panel for cars, to conduct a static structural analysis of internal door panel by finite element method and to compare the performance of glass fiber material with previously recommended materials of internal door panel. This paper deals with the mechanical behavior and vibration analysis of glass fiber-based polymer composite beam structures. Glass fiber has been widely used for many applications due to its high strength, flexibility, stiffness and resistance to chemical this extended work the inact

APA, Harvard, Vancouver, ISO, and other styles

8

M., Dyuthi Priya, R. Vijaya Prakash Dr., and Purna Chandra Sekhar B. "Modeling and Structural Analysis of Aircraft Wing with Different Materials Using FEM." Advancement in Mechanical Engineering and Technology 5, no. 3 (2022): 1–14. https://doi.org/10.5281/zenodo.7439946.

Full text

Abstract:

<em>Aircraft Wing structure consists of skin, ribs and spar sections. The spar carries flight loads and the weight of the wings while on the ground. Other structural and forming members such as ribs are attached to the spars, with stressed skin. The wings are the most important lift producing part of the aircraft. The design of wings may vary according to the type of aircraft and its purpose. Experimental testing of wing structure is more expensive and time consuming process. In this project detailed design of aircraft wing structure made by using CATIA V5 R20. Then structural analysis of the

APA, Harvard, Vancouver, ISO, and other styles

9

Sathishkumar, S., M. Kannan, and R. L. Sankarlal. "THERMAL STRESS ANALYSIS OF INTEGRATED COMBUSTION ENGINE PISTON USING CAE TOOLS (ALUMINUM SILICON ALLOY, ALUMINUM SILICON ALLOY STEEL)." Acta Mechanica Malaysia 3, no. 1 (2020): 20–23. http://dx.doi.org/10.26480/amm.01.2020.20.23.

Full text

Abstract:

The main indention of this research work is to investigate and analyze the stress distribution of piston at actual engine Condition. In this paper thermal stress analysis is done by two different materials Aluminum Silicon alloy and Aluminum Silicon alloy steel. The parameter used for the analysis is operating temperature and material properties of piston. In I.C(internal combustion) Engine piston is most complex and significant part therefore for smooth running of vehicle piston should be in proper working condition. Piston fails mainly Due to mechanical stresses and thermal stresses. Analysi

APA, Harvard, Vancouver, ISO, and other styles

10

Rojas Sola, José Ignacio, and Jesús Molino Delgado. "3D Parametric design and static analysis of the first Spanish winch used to drain water from mines." DYNA 82, no. 190 (2015): 237–45. http://dx.doi.org/10.15446/dyna.v82n190.47123.

Full text

Abstract:

<p>En el presente artículo se analiza en detalle la primera máquina malacate desarrollada en España utilizada para la extracción del mineral. Se trata de un privilegio de invención diseñado por Bernave Dombon en 1850. En particular, se ha realizado el diseño paramétrico 3D con ayuda de software específico (Catia v5 R21) de cada uno de los elementos que componen el conjunto. Asimismo, una vez obtenido el modelo 3D, se ha realizado un análisis funcional estático mediante técnicas de Ingeniería Asistida por Ordenador realizado gracias al concurso del software de análisis por elementos finit

APA, Harvard, Vancouver, ISO, and other styles

11

S. S, Mr Said. "VIBRATION AND STATIC ANALYSIS OF COMPOSITE 2-WHEELER CONNECTING ROD." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem31359.

Full text

Abstract:

Composite paraphernalia are now a day vastly used in the engineering field. The general characteristics held by the conflation paraphernalia are set up to be the reason for using it in the automotive operations. The connecting rod is a major link inside of combustion machine. It connects the piston) to the crankshaft and is responsible for transferring power from the piston to the crankshaft. It has to workonhighr.p.m. because of which it has to bear severe stresses which make its design vital for internal combustion machine. In this design, design, analysis of the 2-wheeler connecting rod wil

APA, Harvard, Vancouver, ISO, and other styles

12

Gangarkar, Mr Manohar. "Optimization and Analysis of 4-Wheeler Connecting Rod for Weight Reduction and Performance Enhancement." International Journal for Research in Applied Science and Engineering Technology 12, no. 5 (2024): 2061–77. http://dx.doi.org/10.22214/ijraset.2024.61708.

Full text

Abstract:

Abstract: Composite materials are now a day widely used in the engineering field. The general characteristics possessed by the composite materials are found to be the reason for using it in the automotive applications. The connecting rod is a major link inside of combustion engine. It connects the piston to the crankshaft and is responsible for transferring power from the piston to the crankshaft. It must work on high RPM because of which it has to bear severe stresses which make its design vital for internal combustion engine. In this project, design, & analysis of the 4wheeler connecting

APA, Harvard, Vancouver, ISO, and other styles

13

B., Ravi teja, Ravikumar B., and kurminaidu M. "Fabrication, Characteristics and Analysis of Drill Bits Made of High HRC Materials." International Journal of Innovative Science and Research Technology 7, no. 6 (2022): 1554–59. https://doi.org/10.5281/zenodo.6879215.

Full text

Abstract:

Drill bits are cutting tools used to remove material to create holes over a cross-section. Drill bits are brake when they can run at rated speed or rated load of drilling machine [1]. Drill bits are in many sizes and shape and can create different kinds of holes in many different materials. Many hard materials, such as carbides, are much more brittle than steel, and are far more subject to breaking.3D model can design with the help of CATIA V5 R20, this design can analysis in ANSYS [2] software and in this 3type of materials can use, like high-speed steel, aluminium silicon carbide. After anal

APA, Harvard, Vancouver, ISO, and other styles

14

Rojas-Sola, José Ignacio, Gloria del Río-Cidoncha, Rafael Ortíz-Marín, and Justino Trenas-Arbizu. "An Approach to the Study of a 19th-Century Sugarcane Mill and Steam Engine through CAD Techniques and Mechanical Engineering." Machines 9, no. 11 (2021): 295. http://dx.doi.org/10.3390/machines9110295.

Full text

Abstract:

This article shows an approach to the three-dimensional modelling of a sugarcane mill and its associated steam engine, designed by the Robey and Co. engineering company in 1869. In order to obtain the 3D CAD model of said invention, CATIA V5 R20 software has been employed. Various sources of starting material, from the basis of this research and found in the process of searching for relevant information, provide information on the main elements, operating conditions, and mechanism of the machine. Thanks to the three-dimensional geometric modelling carried out, it has been possible to explain,

APA, Harvard, Vancouver, ISO, and other styles

15

Rojas-Sola, José Ignacio, Gloria del Río-Cidoncha, Arturo Fernández-de la Puente Sarriá, and Verónica Galiano-Delgado. "Blaise Pascal’s Mechanical Calculator: Geometric Modelling and Virtual Reconstruction." Machines 9, no. 7 (2021): 136. http://dx.doi.org/10.3390/machines9070136.

Full text

Abstract:

This article shows the three-dimensional (3D) modelling and virtual reconstruction of the first mechanical calculating machine used for accounting purposes designed by Blaise Pascal in 1642. To obtain the 3D CAD (computer-aided design) model and the geometric documentation of said invention, CATIA V5 R20 software has been used. The starting materials for this research, mainly the plans of this arithmetic machine, are collected in the volumes Oeuvres de Blaise Pascal published in 1779. Sketches of said machine are found therein that lack scale, are not dimensioned and certain details are absent

APA, Harvard, Vancouver, ISO, and other styles

16

Shaik Chand Mabhu Subhani and N.Vijay Kumar. "Static and Model Analysis on Pneumatic Suspension by using Ansys Software." International Journal for Modern Trends in Science and Technology 6, no. 12 (2020): 384–89. http://dx.doi.org/10.46501/ijmtst061272.

Full text

Abstract:

During the tractor movement, with being attached to the hitch-system working equipment over Rough road surfaces oscillation of the machine take place. These oscillations are a reason of pressure pulsations in the hydraulic hitch-system. The pressure pulse reduction in the tractor Hitch-system is important for increasing of the system components lifetime. Pressure oscillation damping in the tractor hydraulic hitch-system can reduce overall system oscillations and improve the driving control. The design of spring in suspension system is very important. In this project a shock absorber is designe

APA, Harvard, Vancouver, ISO, and other styles

17

Karacor, Berkay, Kaan Koç, and Mustafa Özcanlı. "FINITE ELEMENT ANALYSIS OF EXCAVATOR BUCKET DESIGN WITH BIOMIMETIC APPROACH WITH DIFFERENT STEELS." Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 28, no. 1 (2025): 216–29. https://doi.org/10.17780/ksujes.1536974.

Full text

Abstract:

One of the biggest problems of construction machines that make people's lives easier is digging efficiency. In this study, a new excavator teeth model with a biomimetic approach was developed to solve the problem of digging efficiency. This biomimetic digging teeth model is inspired by the front claw of the armadillo, which is naturally a successful digging animal. In the bucket, only the teeth are biomimetic and in the armadillo teeth model, the 5 mm deep thinned parts on the sides of the standard bucket are determined as 25 mm deep in the armadillo teeth model for extra lightness. In additio

APA, Harvard, Vancouver, ISO, and other styles

18

SHIVAKUMAR, S., and SUNILKUMAR H. S. MR. "ANALYSIS OF MECHANICAL PROPERTIES OF HELICAL GEARS." JournalNX - A Multidisciplinary Peer Reviewed Journal NITET2017 (March 16, 2017): 55–59. https://doi.org/10.5281/zenodo.1461379.

Full text

Abstract:

 Gear is the important member for transmission of power. Different types of gears are used for this power transmission, and helical gears are used in power transmission of Permanent Magnet DC Motors. The main reason for the failure of the gears are bending and surface strength, thus the analysis of these parameters become the most popular filed of interest for the researchers to minimize this failure. In aim of this paper is to different types of stresses occurring in the helical gears of permanent magnet DC motor with analytical solutions as well as FEM solution with the help of ANSYS 14

APA, Harvard, Vancouver, ISO, and other styles

19

Narayana, Varra, B. Sreenivasa Kumar Reddy, and V. Venugopal Reddy. "Investigation on Generative Designs for Fast Connector Socket (FCS) Using High-Strength Low-Alloy (HSLA) Steel." Applied Mechanics and Materials 917 (October 13, 2023): 3–17. http://dx.doi.org/10.4028/p-ji7ngu.

Full text

Abstract:

This study appears to focus on the application of metal additive manufacturing and generative designs to create more efficient and sustainable metallic components. The methodology developed in this study takes a comprehensive approach, from component selection to validation of outputs, which can lead to more efficient use of metallic parts in the future. Here CATIA V5 R20 used to create three new models of a fast connector socket (FCS) components, and then using ANSYS Workbench 16.0 apply the working load limit of 4.5 ton load with AISI 4142 380 qt steel alloy material used to the models to an

APA, Harvard, Vancouver, ISO, and other styles

20

Vivek, Kumar* Anshuka Srivastava. "ANALYTICAL COMPARISION OF DISC BRAKES WITH LINEAR AND CURVED SHAPED SLOTS BETWEEN PLATES FOR STRUCTURAL ANALYSIS ON DIFFERENT PARAMETER USING THROUGH CATIA V5 R20 AND ANSYS 15.0.7." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 9 (2016): 185–90. https://doi.org/10.5281/zenodo.61484.

Full text

Abstract:

The process which converts the kinetic energy of the vehicle into mechanical energy is known as Braking, which must be dissipated in the form of heat. The device using for decelerating or stopping the rotation of a wheel is called as disc brake. A brake disc (or rotor) usually made of linear shaped slots between plates and a disc brake ( or rotor) usually made of curved shaped slots between plates having materials used in both is Structural Steel, is connected to the wheel and/or the axle. Friction material in the form of brake pads (mounted on a device called a brake calliper) is forced mecha

APA, Harvard, Vancouver, ISO, and other styles

21

Reddy, R. Vishnu Vardhan. "Modeling and Analysis of Functionally Graded Material for Disc Plate under Mechanical Loads." International Journal for Research in Applied Science and Engineering Technology 11, no. 7 (2023): 386–94. http://dx.doi.org/10.22214/ijraset.2023.54619.

Full text

Abstract:

Abstract: The most crucial components of an automobile are the brakes. The wheel's rotation can be controlled and stopped by using the brakes. Today's cars employ a variety of brakes, with disc brakes being one of the most common. Brake pads are used in disc brakes to exert force against the disc's two sides mechanically, hydraulically, pneumatically, or electromagnetically. The attached wheel and disc come to a stop due to friction. Brakes turn friction into heat; if the temperature rises too high, they tend to stop working because they are unable to remove enough heat from the system. Brake

APA, Harvard, Vancouver, ISO, and other styles

22

Huzu, Iulia, and Nicolae Florin Cofaru. "Parametric Modeling CAD-CAM of the Ankle and Pathological Related Situations." Applied Mechanics and Materials 657 (October 2014): 740–44. http://dx.doi.org/10.4028/www.scientific.net/amm.657.740.

Full text

Abstract:

It is primary object of the present study to create a 3D model of the human ankle and an axis system that will show the position the tibia and the foot on a healthy subject. Regarding this scope of the study, the first step in obtaining the 3D model of the bones is scanning. The graphic modeling software used is Catia V5 R20. It is another object of the present study to create an axis system that will be very easy to maneuver and on which we can show different pathological situations, not only on a healthy subject, creating their assembly reference systems considering the mechanical and anatom

APA, Harvard, Vancouver, ISO, and other styles

23

Rizwan, Sheikh Mahammad. "Finite Element Analysis and Weight Optimization of Knuckle joint for different Materials by using CAE Tools." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33866.

Full text

Abstract:

The current study involved the analysis of a knuckle joint using finite elements. A mechanical joint with two intersecting cylindrical rods whose axes are in the same plane is called a knuckle joint. Knuckle joint should be designed and manufactured in such a way that it can sustain more load without failure. The objective of the present study is to study knuckle joints made of different materials like aluminum, stainless steel, structural steel, magnesium, and gray cast iron using CAE tools. The CAD model of knuckle joint is made in CATIA V5 R20. The finite element analysis of this CAD model

APA, Harvard, Vancouver, ISO, and other styles

24

Rizwan, Sheikh Mahammad. "Finite Element Analysis and weight Optimization of Knuckle joint for different materials by using CAE Tools." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33528.

Full text

Abstract:

The current study involved the analysis of a knuckle joint using finite elements. A mechanical joint with two intersecting cylindrical rods whose axes are in the same plane is called a knuckle joint. Knuckle joint should be designed and manufactured in such a way that it can sustain more load without failure. The objective of the present study is to study knuckle joints made of different materials like aluminum, stainless steel, structural steel, magnesium, and gray cast iron using CAE tools. The CAD model of knuckle joint is made in CATIA V5 R20. The finite element analysis of this CAD model

APA, Harvard, Vancouver, ISO, and other styles

25

Mitra, Dipika, Prachi Gurav, Silvia Rodrigues, Bela Khobragade, and Amruta Mahajan. "Evaluation of stress distribution in and around dental implants using three different implant–abutment interfaces with platform-switched and non-platform-switched abutments: A three-dimensional finite element analysis." Journal of Dental Research, Dental Clinics, Dental Prospects 17, no. 4 (2023): 256–64. http://dx.doi.org/10.34172/joddd.2023.40723.

Full text

Abstract:

Background. A key factor for the success or failure of an implant is how the stresses are transferred to the surrounding bone. The implant‒abutment connection (IAC) is paramount for implant success. The purpose of this finite element analysis (FEA) study was to evaluate the stress distribution in and around three different implant‒abutment interfaces with platform-switched and platform-matched abutments using the finite element method (FEM). Methods. Three distinct types of IAC were selected: tri-channel internal connection, conical connection, and internal hex connection. Six models were gene

APA, Harvard, Vancouver, ISO, and other styles

26

Abryandoko, Eko Wahyu, Ardana Putri Farahdiansari, Ahmad Ridho Ramadhani, and Moh Nurudduja. "Digital Human Modeling sebagai Evaluasi dan Perancangan Meja Kerja Pengelasan untuk Pembelajaran Praktikum Mahasiswa." Jurnal INTECH Teknik Industri Universitas Serang Raya 10, no. 1 (2024): 19–24. http://dx.doi.org/10.30656/intech.v10i1.8368.

Full text

Abstract:

Perancangan konsep meja kerja pengelasan untuk proses pembelajaran perlu mempertimbangkan resiko Work-related musculoskeletal disorders (WMSDs). Perancangan konsep meja kerja pengelasan dilakukan dengan tujuan meminimalisir risiko EFPs, khususnya jenis gerakan fleksi ke depan pada leher dan posisi lengan yang terangkat saat melakukan pengelasan dalam posisi berdiri dengan estimasi welding selama 360 menit. Penelitian ini bertujuan untuk merancang konsep desain meja kerja pengelasan yang ergonomis, dengan penilaian menggunakan beberapa parameter yang disimulasikan menggunakan Digital Human Mo

APA, Harvard, Vancouver, ISO, and other styles

27

Pravin, B.Sonawane P.G.Damle. "DESIGN AND ANALYSIS OF TOP CONICAL END CLOSURE NOZZLE JUNCTION AND PRESSURE VESSEL." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 8 (2016): 737–47. https://doi.org/10.5281/zenodo.60124.

Full text

Abstract:

In Pressure Vessels, Nozzles are required for inlet and outlet purposes. If these nozzle present on peak of the end closure do not disturb the symmetry of the vessel. However sometimes process requires that nozzles to be placed on the periphery of the pressure vessel. These nozzles disturb the symmetry of the vessel. So that it need to analyzed in FEA to understand effects of nozzle on Stress attributes of the vessel.   In the present work, the importance of the effect of the discontinuity is mentioned, codes related to design of vessels and its components is discussed; nozzle and vessel

APA, Harvard, Vancouver, ISO, and other styles

28

Sai Priyanka, K., J. V. Muruga Lal Jeyan, and R. Sabari Vihar. "Investigation of Flow Separation Over NACA 24015 and 24021 Airfoils using Flow Injection Method." International Journal of Vehicle Structures and Systems 14, no. 3 (2022). http://dx.doi.org/10.4273/ijvss.14.3.02.

Full text

Abstract:

Few explorations used different stream control techniques to work on the streamlined presentation of different airfoils by postponing the stream partition. In this paper, a complete investigation of NACA 24015 and NACA 24021 airfoils was done in CFD at different approaches for various free stream speeds. CATIA V5 R20 was utilized to make the 2D model of the airfoils and the SST K-e disturbance model was used for CFD investigation. Full investigation is performed on a typical airfoil to comprehend the stream conduct at different point of assaults and admission speeds and the equivalent is accom

APA, Harvard, Vancouver, ISO, and other styles

29

Sivaprasad, V., Raghuram Pradhan, and K. Srinivas Rao. "DESIGN AND ANALYSIS OF COMPOSITE PROPELLER BLADE FOR AIRCRAFT." International Journal of Innovative Research in Computer Science & Technology, November 1, 2022, 67–72. http://dx.doi.org/10.55524/ijircst.2022.10.6.13.

Full text

Abstract:

The work in this paper primarily focuses on the modelling and analysis of a plane's propeller blade for strength. The geometry of a propeller blade is a sophisticated 3D model. CATIA V5 R20 is utilised to generate the blade model, which necessitates the usage of high-end modelling CAD software. This document provides a brief overview of Fiber Reinforced Plastic materials as well as the benefits of employing composite propellers over traditional metallic propeller blades. The purpose of this research is to use finite element analysis to analyse the metal and composite strength of the propeller

APA, Harvard, Vancouver, ISO, and other styles

30

Puthisikamani, K., N. Sreenivasaraja, S. Balasundaram, and S. R. Arun. "Design and Analysis of Wing Tip Twist on a Forward Swept Wing Using Prandtl-d Wing Concept." Journal of Aerospace Sciences and Technologies, July 26, 2023, 287–93. http://dx.doi.org/10.61653/joast.v74i4.2022.47.

Full text

Abstract:

Our project is all about the implementation of a wing tip twist for Prandtl-D wing to a Forward swept wing. The innovative idea is that the Prandtl-D wing is used only for a glider till date whereas, we implied this concept for a commercial aircraft. The phenomena of twisting the tip of the wing leads to the change in geometry which results in drag reduction and increase in lift to drag ratio. With the help of a reference project, a wing geometry is chosen and the model is scaled down according to our test section. By using CATIA V5 R20, our model is drawn and analyzed with the help of ANSYS F

APA, Harvard, Vancouver, ISO, and other styles

31

"Retraction: Design and Analysis of Metal Expansion bellows under Axial and Transverse loadsusing CATIA V5 R21 software (IOP Conf. Ser.: Mater. Sci. Eng. 1145 012054)." IOP Conference Series: Materials Science and Engineering 1145, no. 1 (2021): 012173. http://dx.doi.org/10.1088/1757-899x/1145/1/012173.

Full text

Abstract:

This article (and all articles in the proceedings volume relating to the same conference) has been retracted by IOP Publishing following an extensive investigation in line with the COPE guidelines. This investigation has uncovered evidence of systematic manipulation of the publication process and considerable citation manipulation. IOP Publishing respectfully requests that readers consider all work within this volume potentially unreliable, as the volume has not been through a credible peer review process. IOP Publishing regrets that our usual quality checks did not identify these issues befor

APA, Harvard, Vancouver, ISO, and other styles

32

"Weight Reduction and Structural Validation of Four Wheeler Disc Brake with Various Materials." International Journal of Innovative Technology and Exploring Engineering 9, no. 2 (2019): 2378–82. http://dx.doi.org/10.35940/ijitee.b6390.129219.

Full text

Abstract:

Safety side in engineering has been thought of as variety one priority in development of latest vehicle. Each single system has been studied and developed so as to satisfy safety demand. Instead of having bags, sensible suspension systems, sensible handling and safe cornering, there’s one of most crucial system within the vehicle that is brake systems. Without brake within the vehicle can place a traveller in unsafe position. Therefore, it’s a requirement for all vehicles to own correct brake. Due to vital system within the vehicle, several of researchers have conducted a study on brake and it

APA, Harvard, Vancouver, ISO, and other styles

33

Poorang, H., H. Sadeghinaeini, and R. Ghousi. "Diagnosis and Ergonomic Design of Oxy Gas Welding Workstation by RULA Method. Case Study: Welding Workshops." Occupational Medicine, November 16, 2019. http://dx.doi.org/10.18502/tkj.v11i1.1779.

Full text

Abstract:

Introduction: Working under non-ergonomic situations can cause physical damage. It's compulsory for the students of almost every engineering discipline to do parts of their training activitiy in various workshops including welding workstations, the paucity of appropriate situations in such workshops may lead to physical injuries. Ergonomic design of workstations can be considered a way to keep human health. The purpose of this study is an investigation on the application of ergonomic solutions in the design of workstations and Working situation improvement in oxy gaseous welding workshops.&#x0

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!