Log in

Relevant bibliographies by topics / Catia V5 / Journal articles

To see the other types of publications on this topic, follow the link: Catia V5.

Journal articles on the topic 'Catia V5'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Catia V5.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Basori, Basori, and Rudianto Rudianto. "ANALISIS KONSTRUKSI RANGKA ALAT PENGUJIAN POMPA MENGGUNAKAN PROGRAM CATIA V5." Jurnal Konversi Energi dan Manufaktur 1, no. 2 (2014): 88–93. http://dx.doi.org/10.21009/jkem.1.2.4.

Full text

Abstract:

Metode analisis yang diterapkan pada rangka alat pengujian pompa adalah analisis manggunakan progaramCatia V5. Program Catia V5dirancangdandibuatuntuk mempermudah pekerjaan-pekerjaan teknik diantaranyakonstruksi, desain, perpipaan, kelistrikan dan lain-lain. Catia memiliki fitur yang cukup lengkap sehingga mampu melakukan CAD (Computer Aided Desain), CAM (Computer Aided Manufacture) dan CAE (Computer Aided Engineering). CATIA V5 juga mampu melakukan analisis secara 3D pada perancangan konstruksi rangka peralatan pengujian pompa. Diharapkan dari penelitian terhadap rangka yang digunakan pada al

APA, Harvard, Vancouver, ISO, and other styles

2

Ruhr, Hilko, Jan Niklas Lemke, and Alexander Piskun. "Insassenbasierte Konzeptauslegung für Fahrzeuge in Catia V5/Occupant-Based Vehicle Design in Catia V5." Konstruktion 68, no. 04 (2016): 83–88. http://dx.doi.org/10.37544/0720-5953-2016-04-83.

Full text

Abstract:

Inhalt: In der modernen Fahrzeugentwicklung ist die Konzeption der Fahrzeuge von innen nach außen eine häufig formulierte Anforderung. Tatsächlich werden früh im Entstehungsprozess hochkomplexe digitale Ergonomiewerkzeuge eingesetzt, um einen möglichst großen Teil der ergonomischen Auslegung abzusichern und die Anzahl der, monetär und zeitlich aufwendigen, physischen Erprobungen gering zu halten. Durch die immer kürzer werdenden Entwicklungszeiten und die steigende Modellanzahl besteht in der Automobilindustrie darüber hinaus der Bedarf, Prozesse zu standardisieren und zu verschlanken. Die vor

APA, Harvard, Vancouver, ISO, and other styles

3

Sulistiyanto, Muchlis, Siti Nurhidayah, Hasan Basri, et al. "Increasing Student Competency Through Catia V5 Software Training." Entrepreneurship and Community Development 1, no. 2 (2023): 82–89. http://dx.doi.org/10.58777/ecd.v1i2.135.

Full text

Abstract:

The current era demands that all aspects of engineering be carried out automatically, including creating technical drawings, which were previously done manually, now being replaced with drawings using CAD (Computer Aided Design) software, which offers automatic drawings. This problem impacts the industrial world, which requires skilled workers in the field of design. In the manufacturing industry, Catia V5 is widely used in product designs because it is faster and easier to use than paper and drawing tools. This Catia V5 Software training aims to improve students' 2D and 3D drawing abilities.

APA, Harvard, Vancouver, ISO, and other styles

4

Michalczuk, Hubert, and Henryk Czarnecki. "Cold forming taps parameterization in system Catia v5." Mechanik, no. 7 (July 2015): 563/549–563/558. http://dx.doi.org/10.17814/mechanik.2015.7.271.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chen, Ze Zhong, Kai Fan, and Zhen Liang Lou. "Key Technology and Development on Side Pattern CAD/CAM on Mould for Auto Lamp." Advanced Materials Research 97-101 (March 2010): 370–73. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.370.

Full text

Abstract:

A model of side pattern CAD/CAM on mould for auto lamp integrated with CATIA V5 is built. After analyzing the properties of design and the manufacture of side pattern on mould for auto lamp, key technology, such as grouping, sorting, determination of continuity, fairing and fitting of side pattern curves, generating of NC files and G codes, are presented. Using out-process redeveloping tools of CATIA V5, a CATIA V5 integrated side pattern CAD/CAM system for mould of auto lamp is developed. At last, a practical example shows that the technology and the software satisfy the design and manufactur

APA, Harvard, Vancouver, ISO, and other styles

6

Banerjee, Siddhartho K., Percey Thomas, and Xiao Cai. "CATIA V5-Based Parametric Aircraft Geometry Modeler." SAE International Journal of Aerospace 6, no. 1 (2013): 311–21. http://dx.doi.org/10.4271/2013-01-2321.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ghionea, Ionuţ Gabriel, Goran Devedžić, and Saša Ćuković. "Parametric Modeling of Surfaces Using CATIA v5 Environment." Applied Mechanics and Materials 760 (May 2015): 93–98. http://dx.doi.org/10.4028/www.scientific.net/amm.760.93.

Full text

Abstract:

The goal of the CAD parametric modeling is to create a 3D representation, flexible and complex enough to encourage the engineer to easily consider a variety of designs with the cost of applying changes as low as possible. Geometric modeling systems provide a virtual environment similar to the real one in which the physical model is constructed/designed and manipulated. Using such a system, the engineer models, adds, deforms and edits parts in the process of detailing a shape. The virtual model may look the same as the real physical model, but it’s intangible. However, the 3D virtual model is a

APA, Harvard, Vancouver, ISO, and other styles

8

Gloria Del Río‐Cidoncha, María, Juan Martínez‐Palacios, and Francisco Ortuño‐Ortiz. "Task automation for modelling solids with Catia V5." Aircraft Engineering and Aerospace Technology 79, no. 1 (2007): 53–59. http://dx.doi.org/10.1108/00022660710720494.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Haba, Sever Alexandru, and Gheorghe Oancea. "Design and Manufacturing Optimization of Single-Cylinder Engine Block Prototype Using CATIA Environment." Applied Mechanics and Materials 474 (January 2014): 165–70. http://dx.doi.org/10.4028/www.scientific.net/amm.474.165.

Full text

Abstract:

This paper presents a complex project, implemented in CATIA V5 environment, used for mechanical design and prototype obtaining of the single-cylinder engine block. The main features which are implemented allow reducing the time for design, using the end user design parameters for the prototype manufacturing, reducing the material consumption, optimization of the numerical control technology for milling process. The paper also presents a software system, developed with Visual Basic in CATIA environment, which can be used to automate the process of 3D model generating, creating the data files fo

APA, Harvard, Vancouver, ISO, and other styles

10

Yang, Ye Guang, and Shi Hui Guo. "The Off-Line Programming System of Robot Based on CATA Platform." Advanced Materials Research 482-484 (February 2012): 801–4. http://dx.doi.org/10.4028/www.scientific.net/amr.482-484.801.

Full text

Abstract:

This thesis analyzes the off-line programming system of spraying robot, and study several keys of off-line programming. According to the characteristics of CATIA V5 document structure, a technical scheme for developing off-line programming is proposed. In this scheme, the off-line programming is developed based on CATA platform using CATIA Automation and CAA VC++.

APA, Harvard, Vancouver, ISO, and other styles

11

Zhang, Chen, Chang Yong Xu, and Li Yan Zhang. "Kinematics Simulation of Proprioceptive Mechanism for Vehicle Driving Simulator." Applied Mechanics and Materials 63-64 (June 2011): 82–85. http://dx.doi.org/10.4028/www.scientific.net/amm.63-64.82.

Full text

Abstract:

A proprioceptive mechanism of vehicle driving simulator is proposed to realize pitch, roll and vibration action of vehicle driving simulator based on application foundation of proprioceptive mechanism. The proposed mechanism has very simple structure and a brief description of this mechanism is given. The proposed proprioceptive mechanism is established based on CATIA V5 platform by using the virtual prototyping technology. The CATIA V5 motion simulation model is used to simulate the proposed proprioceptive mechanism by setting the parameters of source motion input and motion interference and

APA, Harvard, Vancouver, ISO, and other styles

12

MUTOH, Haruhiko, and Kingo MAEKAWA. "119 CFD Analysis Example using "FLUENT for CATIA V5"." Proceedings of Conference of Kansai Branch 2008.83 (2008): _1–24_. http://dx.doi.org/10.1299/jsmekansai.2008.83._1-24_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Pavan, G., and N. Kishore. "Static and Fatigue Analysis on a Wing Spar Joint for a Light Jet Aircraft Structure Using 2024 T351 Material." Applied Mechanics and Materials 895 (November 2019): 244–52. http://dx.doi.org/10.4028/www.scientific.net/amm.895.244.

Full text

Abstract:

The main objective of this paper is to present prototype of wing spar joint using CATIA V5 software to study the behavior of wing spar joint as per actual working condition and to perform structural analysis of the wing spar joint based on condition of cyclic loading (fatigue loading). Determining the loading modes in the spar joint is subjected to static load and fatigue loads which should be taken into account in the evaluation of the strength and fatigue life. Initially, the components were modeled with CATIA V5 and imported to MSC PATRAN; MSC NASTRAN is used as a solver. From the obtained

APA, Harvard, Vancouver, ISO, and other styles

14

Purcar, Carmen, Mircea Bădescu, and Marinela Inţă. "Studies on wheel mounting options on shafts." MATEC Web of Conferences 290 (2019): 01016. http://dx.doi.org/10.1051/matecconf/201929001016.

Full text

Abstract:

The paper presents a general description of chains and chain transmissions, their advantages and disadvantages. A triple chain wheel is then projected into the CATIA V5 program. A static analysis of some wheel mounting variants on a camshaft with the Generative Structural Analysis module in the CATIA V5 program is then made. The orientation-fastening variants with a wedge, two feathers or three screws positioned equidistant at 120 degrees on a diameter are analysed. As a result of the finite element analysis, the conclusion is that the three-screw variant is the most appropriate. Material stre

APA, Harvard, Vancouver, ISO, and other styles

15

Georgeta, Haraga, Ghelase Daniela, and Daschievici Luiza. "Design and Analysis of a Coffee Table." International Journal of Computational and Applied Mathematics & Computer Science 2 (June 4, 2022): 29–32. http://dx.doi.org/10.37394/232028.2022.2.6.

Full text

Abstract:

This paper focuses on the design and finite element analysis (FEA) of coffee table with center hole can be used with or without umbrella. Therefore, for a better graphic performance we have used CATIA V5 that allows the 2D/3D solids modeling with geometric constraints. In CATIA, we can simulate the whole very easy thing within a virtual reality (VR) using the applications called „Part Design and Generative Structural Analysis”.

APA, Harvard, Vancouver, ISO, and other styles

16

Pawan, Kumar. "STUDY OF VARIOUS NACA SERIES AEROFOIL SECTIONS AND WING CONTOUR GENERATION USING CATIA V5." Aerospace Engineering: An International Journal (AEROIJ) 1, no. 1 (2019): 1–8. https://doi.org/10.5281/zenodo.3552403.

Full text

Abstract:

<strong>ABSTRACT </strong> Aerofoil is the basic part to be designed during starting stage of creating a new airplane. It is the part that forms of cross section of the wing. The wing is used to produce lift force that balances the weight which acts downwards. Velocity variation creates pressure difference over top and bottom surface of wing. The pressure difference over top and bottom surface of wing creates lift. In this paper, we studies about aerofoil and its basic types and various NACA series and equation of 4 digit NACA series. In this paper, we come to know how we can export an aerofoi

APA, Harvard, Vancouver, ISO, and other styles

17

Neamtu, Calin, Paul Bere, Corina Dobocan, Rares Ghinea, and Sergiu Solcan. "Mold Design for Polystyrene Plastic Anchor." Applied Mechanics and Materials 808 (November 2015): 143–48. http://dx.doi.org/10.4028/www.scientific.net/amm.808.143.

Full text

Abstract:

The paper presents the entire process of designing and optimizing an injection mold for a polystyrene plastic anchor. The design process begins with a comprehensive market study of the polystyrene plastic anchors available on the Romanian market, and the results of this study are then used for the creation of a new model of anchor. After this first stage of design, the resulted model is optimized in terms of the injection process using the simulation software Autodesk Moldflow Adviser. After establishing the final form of the polystyrene plastic anchor, the mold is designed in Catia V5 using a

APA, Harvard, Vancouver, ISO, and other styles

18

Dubovská, Rozmarína, and Jozef Majerik. "Modeling and Virtual Simulation of Hard Surface Milling and Forming Process Using Advanced CAE Systems." Advanced Materials Research 941-944 (June 2014): 2321–31. http://dx.doi.org/10.4028/www.scientific.net/amr.941-944.2321.

Full text

Abstract:

This paper presents the influence of modeling and simulation techniques for hard milling and forming. The aim of these simulations is the ability to optimize the manufacturing technologies even before the real production of its own tools, because their manufacturing process is very difficult in terms of production time, materials and other costs. The simulated results visualize roughing and finishing process of milling and generate tool-paths in CATIA V5. Simulation results of forming realized in PAM-Stamp 2G using a 3D model of the punch and the blank confirm the suitability of the proposed d

APA, Harvard, Vancouver, ISO, and other styles

19

Sharma, Aman, Pradeep Kumar Singh, and Vikas Kumar Sharma. "Investigation and examination of CATIA V5 utilization in composite materials." Materials Today: Proceedings 45 (2021): 3061–67. http://dx.doi.org/10.1016/j.matpr.2020.12.061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

K, Sandhya. "Structural Analysis of an Off-Road Vehicle Suspension System Using CATIA and ANSYS." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33001.

Full text

Abstract:

This project delves into the structural analysis of an off-road vehicle suspension system, employing cutting-edge software tools such as CATIA and ANSYS. Off-road vehicles necessitate robust suspension systems capable of withstanding harsh terrain conditions while ensuring vehicle stability, manoeuvrability, and passenger comfort. The study focuses on evaluating the structural integrity, performance, and behaviour of the suspension system under diverse load conditions and terrain scenarios. This project focuses on conducting a comprehensive structural analysis of an off-road vehicle suspension

APA, Harvard, Vancouver, ISO, and other styles

21

Црљеница, Горан, та Драган Живанић. "ПАРАМЕТРИЈСКО МОДЕЛОВАЊЕ ТРАКАСТОГ ТРАНСПОРТЕРА". Zbornik radova Fakulteta tehničkih nauka u Novom Sadu 35, № 03 (2020): 405–8. http://dx.doi.org/10.24867/07am03crljenica.

Full text

Abstract:

У овом раду описан је поступак параметријског моделовања тракастог транспортера у програмском пакету ,,Catia V5-6R2016”. У првом делу је описан општи поступак параметризације, док је у другом делу, на основу претходног прорачуна, моделиран тракасти транспортер у складу са правилима параметризовања.

APA, Harvard, Vancouver, ISO, and other styles

22

Ronak, Singh Bhatia*1 Er. Nikhilesh N. Singh2 &. Dr. Prabhat Kumar Sinha3. "STUDY AND VIBRATION ANALYSIS OF MULTIPOINT CUTTING TOOLS OF MILLING MACHINE BY FEM AND ANSYS BENCHWORK 14.0." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 7, no. 6 (2018): 459–68. https://doi.org/10.5281/zenodo.1297448.

Full text

Abstract:

In the present article, the research has been conducted for high frequency vibration and the total deformation of face milling cutter (micro level) to predict the deformation under varying frequencies developed in high speed machining operations. Under this, the work has been accomplished in tool vibration for predicting tool life and tool wear. This current work highlights the model of face milling cutter with tool inserts for static and dynamic components of cutting process. The computer generation has been created using CATIA V5 to stimulate the deformation process. Many simulation models u

APA, Harvard, Vancouver, ISO, and other styles

23

Ulian, Tudor-Marian, and Andrei Ionuţ Donţu. "Cylinder Head Analysis from Thermal Point of View Using Finite Element Method (FEM) of a Spark Ignition Engine by Using Zonal Cooling Principle." Bulletin of the Polytechnic Institute of Iași. Machine constructions Section 67, no. 1 (2021): 29–33. http://dx.doi.org/10.2478/bipcm-2021-0003.

Full text

Abstract:

Abstract In this paper, it is in focus a detailed analysis of the temperature distribution in the cylinder head. For this scope is build up a tree-dimensional (3D) model using Catia V5. The thermal analysis was performed using 3D finite element method, Ansys Workbench 16.1.

APA, Harvard, Vancouver, ISO, and other styles

24

Zhang, Wenguo, Le Zhang, Pei Lei, and Xiaobo Jin. "Automated Solving Algorithm and Application for Oriented Bounding Box Based on Principal Axis of Inertia." Journal of Physics: Conference Series 2101, no. 1 (2021): 012007. http://dx.doi.org/10.1088/1742-6596/2101/1/012007.

Full text

Abstract:

Abstract In mechanical design and manufacture, the minimum size of raw material of each part should be measured before processing. Generally, this size could be equal to the size of minimum bounding box. When the assembled parts of a product reach an enormous quantity, the measurement would be a rough work. This paper introduced an automated solving algorithm for the oriented bounding box based on principal axis of inertia, combined with CATIA structural tree recursive traversal algorithm according to CAA V5 Automation API, to implement an automated solution of the engineering acceptable minim

APA, Harvard, Vancouver, ISO, and other styles

25

Jebarose Juliyana. S et al.,, Jebarose Juliyana S. et al ,. "Design , Analysis of Improvised Clutch Pedal Linkage Mechanism using CATIA V5." International Journal of Mechanical and Production Engineering Research and Development 9, no. 3 (2019): 53–60. http://dx.doi.org/10.24247/ijmperdjun20196.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Taufik, Ahmad Zainal, Nur Rashid, Maz lan, Mohd Faruq, and Muhammad Zahir. "Electric car chassis design and analysis by using CATIA V5 R19." IOSR Journal of Mechanical and Civil Engineering 11, no. 4 (2014): 56–69. http://dx.doi.org/10.9790/1684-11435669.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Agung Nugroho and Heri Yudiono. "Design Analysis Pillowblock Strength of Rotogravure Gearbox Uses Catia V5 Software." Jurnal Inovasi Mesin 6, no. 2 (2024): 1–17. https://doi.org/10.15294/jim.v6i2.11487.

Full text

Abstract:

The pillowblock has not been tested to determine the von Mises stress, displacement and safety factor values. The aim of this research is to analyze the results of the Pillowblock design analysis using the finite element method using CATIA V5 software.The research method used in this research is an experimental method. In this study, the independent variable used was variations in the thickness dimensions of the Rotogrvure Pillowblock Gearbox. The variations used are Pillowblock Close 1 with varying thicknesses (5 mm, 4 mm, 6 mm, 7 mm), Pillowblock Close 2 with varying thicknesses (6 mm, 5 mm,

APA, Harvard, Vancouver, ISO, and other styles

28

Wyleżoł, Marek, and Piotr Frączek. "Virtual model of a protective helmet for people waiting for cranioplastic treatment." Mechanik 92, no. 1 (2019): 46–48. http://dx.doi.org/10.17814/mechanik.2019.1.8.

Full text

Abstract:

Article refers to discuss the virtual helmet model designed for people waiting for craniplasty treatment. The helmet should protect the trauma zone until surgery. It should also be easy in everyday use. The model was made using ergonomic and strength analysis. All work was supported by the CATIA v5 system.

APA, Harvard, Vancouver, ISO, and other styles

29

Karthikeyan, M. "Experimental Investigation of Laminated Metal Matrix Composite Used in Drone Frame." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (2022): 4545–93. http://dx.doi.org/10.22214/ijraset.2022.44893.

Full text

Abstract:

Abstract: In this project design, fabrication, and analysis of sheet laminated Metal Matrix Composites will be carried out. It will be very useful for Aircraft Nose Cone, drone frames, and other surface materials of aircraft. The model of laminated metal matrix composite is designed using Catia V5 and also material to be applied to the body. Imported Geometry from Catia V5 to ANSYS will be analyzed by applying material properties and loads under different conditions. Based on ANSYS results the laminated metal matrix composite will experiment with. In that I take there are three types of Combin

APA, Harvard, Vancouver, ISO, and other styles

30

Rojas-Sola, José Ignacio, Gloria del Río-Cidoncha, Rafael Ortíz-Marín, and Andrés Cebolla-Cano. "Design and Development of a Geometric Calculator in CATIA." Symmetry 15, no. 2 (2023): 547. http://dx.doi.org/10.3390/sym15020547.

Full text

Abstract:

In this article, an application in the field of engineering graphics is presented for the design of a geometric calculator generated as a macro in CATIA V5. The code of this macro is written in the CATVBA language and utilizes the CATIA internal editor while taking advantage of the capabilities offered by Visual Basic for Applications (VBA). The principal purpose of this application lies in the possibility of creating the three main geometric elements (point, line, and plane) and in solving five types of general geometric problems, and then comparing the results obtained with their equivalent

APA, Harvard, Vancouver, ISO, and other styles

31

Bucha, Jozef, Jana Gavačová, and Tomáš Milesich. "Application of Skeleton Method in Interconnection of Cae Programs Used in Vehicle Design." Scientific Proceedings Faculty of Mechanical Engineering 22, no. 1 (2014): 1–7. http://dx.doi.org/10.2478/stu-2014-0001.

Full text

Abstract:

AbstractThis paper deals with the application of the skeleton method as the main element of interconnection of CAE programs involved in the process of vehicle design. This article focuses on the utilization of the skeleton method for mutual connection of CATIA V5 and ADAMS/CAR. Both programs can be used simultaneously during various stages of vehicle design.

APA, Harvard, Vancouver, ISO, and other styles

32

Aloni, Onkar S., Rohan R. Paradkar, and Sandhya M. Umre. "Deformation and Stress Analysis of Sheet Hydroforming in Car Frame T-Joint." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (2022): 92–97. http://dx.doi.org/10.22214/ijraset.2022.42091.

Full text

Abstract:

Abstract: Hydroforming is a relatively new metal forming process that offers many advantages over traditional cold forming processes, including the ability to produce more complex components with fewer operations. For certain geometries, hydroforming technology makes it lighter, stiffer, cheaper to manufacture, and requires less blanks, resulting in less material waste. This paper focuses on the analysis of composite T-joints which are used in automobiles under various loads. It is modelled analysed using CATIA V5 and ANYSYS software’s respectively. There are several studies on design optimiza

APA, Harvard, Vancouver, ISO, and other styles

33

Kumar, Sanjeev, and Swati Gangwar. "Flexural analysis of green composite material using CATIA V5 for tool carrier." Materials Today: Proceedings 46 (2021): 6800–6804. http://dx.doi.org/10.1016/j.matpr.2021.04.343.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Popescu, F., R. M. Chivu, K. Uzuneanu, and I. Ion. "Design and finite element analysis of a lower arm using CATIA V5." IOP Conference Series: Materials Science and Engineering 1262, no. 1 (2022): 012070. http://dx.doi.org/10.1088/1757-899x/1262/1/012070.

Full text

Abstract:

The primary role of the suspension is to ensure the comfort of the passengers but also to protect the vehicle components against mechanical shocks caused by uneven road. It is designed for stability and sudden damping. The suspension system must first and foremost ensure the safety of the passengers of the vehicle but also their comfort. The paper aims to analyze with finite elements the lower oscilating arm in order to optimize the design and find the best material.

APA, Harvard, Vancouver, ISO, and other styles

35

Bujoaică, Răzvan, Ionel Vieru, Viorel Nicolae, and Dănuț Marinescu. "Virtual Model Used for Kinematics Study of Car’s Rear Axle." Applied Mechanics and Materials 822 (January 2016): 44–49. http://dx.doi.org/10.4028/www.scientific.net/amm.822.44.

Full text

Abstract:

Abstract: The paper presents the possibility of generating a complex kinematic model that can be used to simulate various types of semi-independent rear axle used in the design of new cars. This model allows quick check for such axles of the interference that may occur in their functioning on the car. For application it was used the CATIA V5 software.

APA, Harvard, Vancouver, ISO, and other styles

36

Lazăr, Sergiu. "Computerized dynamic fluid simulation (CFD) for measuring the influence of the cab deflector on the aerodynamics of trucks." Journal of Research and Innovation for Sustainable Society 3, no. 1 (2021): 11–17. http://dx.doi.org/10.33727/jriss.2021.1.2:11-17.

Full text

Abstract:

This paper refers to how the cab deflector of trucks can influence the aerodynamic coefficient. The first part of the paper includes some generalities taken from previous studies, regarding the types of solutions to improve aerodynamics for trucks. The second part of the paper is a more practical one and has two main chapters: modeling and simulation of modeled parts. In this sense, a truck and 3 cabin deflectors were schematically modeled in Catia v5. After assembly in the Catia v5 program, the impact of the cabin deflector was analyzed. Thus, a computerized dynamic fluid simulation (CFD) was

APA, Harvard, Vancouver, ISO, and other styles

37

Srihari, P., D. Sreeramulu, A. Raghupathi Rao, N. Durgacharan, and Ch Bhaskara Rao. "INTERFACING OF ROBOTS FOR MANUFACTURING AUTOMATION." International Journal of Engineering Applied Sciences and Technology 7, no. 3 (2022): 283–90. http://dx.doi.org/10.33564/ijeast.2022.v07i03.040.

Full text

Abstract:

This article outlines the various stages of operations involved in pick and place operation by the interfacing of 2 robots. The interfacing involves sending the input signals to the second robot from the first robot to perform the task. What coded by the user set of instructions. While performing any robot operation, a robot may interact with other robot in various 4 degrees ranging in between 2 extremes. Now-a-days, various advanced robots are used in industries, but still controlling is done manually or using processors likewise Arduino, microcontroller. Here the programmable logic and Contr

APA, Harvard, Vancouver, ISO, and other styles

38

Patwardhan, Mayuresh V. "Catia Customization for Design and Modeling of Two Stage Spur Gearbox." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 764–73. http://dx.doi.org/10.22214/ijraset.2021.35082.

Full text

Abstract:

In this paper, we describe how the customization of design task, in solid modeling with CATIA V5 for two stage spur gearbox can be approached, by means of macros (piece of code) and with GUI form. The user has to supply some basic requirements of the gearbox and rest of the different parameters for design of gearbox is calculated by formulas. And then with the help of these parameters, part model of gearbox is created.

APA, Harvard, Vancouver, ISO, and other styles

39

Patwardhan, Mayuresh V., and Uddhavrao Nimbalkar. "Catia customization for Design and Modeling of Two stage spur Gearbox." International Journal of Advanced Science Computing and Engineering 3, no. 3 (2021): 113–22. http://dx.doi.org/10.30630/ijasce.3.3.59.

Full text

Abstract:

In this paper, we describe how the customization of design task, in solid modeling with CATIA V5 for two stage spur gearbox can be approached, by means of macros (piece of code) and with GUI form. The user has to supply some basic requirements of the gearbox and rest of the different parameters for design of gearbox is calculated by formulas. And then with the help of these parameters, part model of gearbox is created.

APA, Harvard, Vancouver, ISO, and other styles

40

Patwardhan, Mayuresh V., and Uddhavrao Nimbalkar. "Catia customization for Design and Modeling of Two stage spur Gearbox." International Journal of Advanced Science Computing and Engineering 3, no. 3 (2021): 113–22. http://dx.doi.org/10.62527/ijasce.3.3.59.

Full text

Abstract:

In this paper, we describe how the customization of design task, in solid modeling with CATIA V5 for two stage spur gearbox can be approached, by means of macros (piece of code) and with GUI form. The user has to supply some basic requirements of the gearbox and rest of the different parameters for design of gearbox is calculated by formulas. And then with the help of these parameters, part model of gearbox is created.

APA, Harvard, Vancouver, ISO, and other styles

41

Mladenović, Veljko. "PROJEKTOVANJE PREDNJEG DELA KAROSERIJE LAKOG HIBRIDNOG VOZILA." Zbornik radova Fakulteta tehničkih nauka u Novom Sadu 34, no. 09 (2019): 1499–502. http://dx.doi.org/10.24867/04am03mladenovic.

Full text

Abstract:

U radu je opisan proces projektovanja prednjeg dela karoserije lakog hibridnog vozila (HEV Hermes), uz pomoć programa ,,CATIA P3 V5-6R2016”. Izrađena su dva različita modela, pridržavajući se ograničenja koja su zadata na samom početku, i upoređena su sa više različitih aspekata. Objašnjen je i proces izrade delova od plastike (branik), kao i sam programski paket koji je poslužio kao alat za projektovanje modela.

APA, Harvard, Vancouver, ISO, and other styles

42

Panchal, Dileep. "The Evaluation of Structural Analysis on Bicycle Frame using Steel Alloy and Titanium Alloy." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 693–700. http://dx.doi.org/10.22214/ijraset.2021.34936.

Full text

Abstract:

Analysis of Bicycle Frame by using 3D CAD MODELLING TOOL In this project we are going to design Bicycle Frame by using 3D CAD Modelling tool i.e., CATIA V5 R20.After completion of design we are going to do structural analysis on frame with the use of existing material and proposed material and we’ll conclude why the proposed material better than the existing material.

APA, Harvard, Vancouver, ISO, and other styles

43

Kráľ, Ján, Ján Kráľ, Adrián Rjabušin, Lórant Harsányi, Kamil Madáč, and Jaroslav Melko. "Implementation of the Concorde Transport System in the Production." Applied Mechanics and Materials 683 (October 2014): 135–41. http://dx.doi.org/10.4028/www.scientific.net/amm.683.135.

Full text

Abstract:

This article deals with toolpath analysis and optimization of CNC machines. There are many logistical programs used for searching of optimal toolpath between specified points. One of those logistical systems is CONCORDE. This system we have applied into CAD systems like Pro Engineer Creo E and CATIA V5. The results from comparision of each method used in mentioned CAD systems are presented in the end of this article.

APA, Harvard, Vancouver, ISO, and other styles

44

Tomşeanu, Laurian, Viorel Nicolae, Ionel Vieru, and Dănuţ Marinescu. "Comparative modal analysis for a twisted beam axle for a hybrid vehicle." IOP Conference Series: Earth and Environmental Science 960, no. 1 (2022): 012009. http://dx.doi.org/10.1088/1755-1315/960/1/012009.

Full text

Abstract:

Abstract In this article it is presented a comparative analysis of natural mode frequencies for a non-powered rear axle used to fit mass production vehicle and for a similar rear axle derived from the first one to be used to fit a hybrid powered vehicle. The CAD model of the axle and the computed natural mode frequencies were realised using CATIA V5. For calculation, finit element method was used.

APA, Harvard, Vancouver, ISO, and other styles

45

Gan, Zhong, and Hai Bing Tan. "The Method to Unfold Integral Skin-Panel Based on CATIA." Advanced Materials Research 304 (July 2011): 96–100. http://dx.doi.org/10.4028/www.scientific.net/amr.304.96.

Full text

Abstract:

This paper will discuss the unfolding of skin-panel by using the software CATIA. During the process the characteristics of integral skin-panel and the development of its unfolding were presented. Consequently, it could be seen that the structural surface of the external form could be extracted for curved surface. So the unfolding of skin-panel was able to be simplified to the unfolding of the curved surface. Main steps of unfolding the integral skin-panel in CATIA V5 software environment are stated in following parts. The measurement results of the lightening groove located in larger deformati

APA, Harvard, Vancouver, ISO, and other styles

46

Dubovska, Rozmarina, Jaroslav Jambor, and Jozef Majerik. "Implementation of CAD/CAM System CATIA V5 in Simulation of CNC Machining Process." Procedia Engineering 69 (2014): 638–45. http://dx.doi.org/10.1016/j.proeng.2014.03.037.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Turek, Paweł, and Marek Magdziak. "The influence of the type of a filter on the results of non-contact measurements of the selected free-form surface." Mechanik 91, no. 11 (2018): 992–94. http://dx.doi.org/10.17814/mechanik.2018.11.178.

Full text

Abstract:

The article concerns the early stages of the reverse engineering of the selected free-form surface. The process of acquisition of measurement data was carried out by using the MCA II coordinate measuring arm equipped with a non-contact measuring probe. The influence of the selected commands and settings of Focus Inspection and CATIA V5-6 software packages in the field of filtration of measurement results on the quality of obtained measurement data was analysed.

APA, Harvard, Vancouver, ISO, and other styles

48

Popescu, Lizeta, and Lucian Diodiu. "Thermal simulation of an actuator." MATEC Web of Conferences 290 (2019): 01014. http://dx.doi.org/10.1051/matecconf/201929001014.

Full text

Abstract:

The paper presents a method for verifying the thermal stability of an actuator with axial symmetry as a final stage of its assisted design. Thermal simulation of electromagnetically and cinematically optimized actuator is done by the Finite Element Method in Comsol Multiphysics (Heat Transfer Module). The thermal simulation is based on the geometry drawn in the Catia V5 and the material characteristics. Thermal simulation reduces the time and cost of designing actuators and prototypes.

APA, Harvard, Vancouver, ISO, and other styles

49

SICOE, Gina Mihaela, Tatiana GEORGESCU, and Daniel Constantin ANGHEL. "EXPLORING DIMENSIONAL PRECISION OF PARAMETRICALLY DESIGNED COMPONENTS USING Z-ULTRAT MATERIAL." University of Pitesti. Scientific Bulletin - Automotive Series 33, no. 1 (2023): 1–8. http://dx.doi.org/10.26825/bup.ar.2023.005.

Full text

Abstract:

In this work, we investigated the dimensional accuracy of parametrized parts in the Catia V5 software. We adopted an experimental plan, applying the Taguchi methodology to evaluate the influence of process variables on dimensional accuracy. Process parameters such as layer thickness, infill percentage, and wall thickness were varied within the experiments, and the obtained results provided essential information regarding the influence of these parameters on the precision of parts obtained through additive manufacturing technology.

APA, Harvard, Vancouver, ISO, and other styles

50

GAIKWAD, RUSHIKESH B., and ABHAY V. GAUR. "STATIC AND DYNAMIC ANALYSIS OF SHAFT (EN24) OF FOOT MOUNTING MOTOR USING FEA." IJIERT - International Journal of Innovations in Engineering Research and Technology 5, no. 6 (2018): 57–70. https://doi.org/10.5281/zenodo.1445901.

Full text

Abstract:

<strong>This paper is about static and dynamic analysis of f oot mounted motor which is also known as (EN24) type moto r by using FEA software ANSYS 14.5 and modeling is done with help of CATIA V5 R20. This is the special problem which is observed by Laxmi Hydraulics Pvt. Ltd Solapur,Maharashtra,India. They have reported frequent failures of this type of Shaft .</strong> <strong>https://www.ijiert.org/paper-details?paper_id=141301</strong>

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!