Log in

Relevant bibliographies by topics / CATIA / Journal articles

To see the other types of publications on this topic, follow the link: CATIA.

Journal articles on the topic 'CATIA'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'CATIA.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Basori, Basori, and Rudianto Rudianto. "ANALISIS KONSTRUKSI RANGKA ALAT PENGUJIAN POMPA MENGGUNAKAN PROGRAM CATIA V5." Jurnal Konversi Energi dan Manufaktur 1, no. 2 (2014): 88–93. http://dx.doi.org/10.21009/jkem.1.2.4.

Full text

Abstract:

Metode analisis yang diterapkan pada rangka alat pengujian pompa adalah analisis manggunakan progaramCatia V5. Program Catia V5dirancangdandibuatuntuk mempermudah pekerjaan-pekerjaan teknik diantaranyakonstruksi, desain, perpipaan, kelistrikan dan lain-lain. Catia memiliki fitur yang cukup lengkap sehingga mampu melakukan CAD (Computer Aided Desain), CAM (Computer Aided Manufacture) dan CAE (Computer Aided Engineering). CATIA V5 juga mampu melakukan analisis secara 3D pada perancangan konstruksi rangka peralatan pengujian pompa. Diharapkan dari penelitian terhadap rangka yang digunakan pada al

APA, Harvard, Vancouver, ISO, and other styles

2

Liu, Shao Gang, and Farah Edris. "Forward Kinematics Simulation for a Surgical Robot Using CATIA 5." Journal of Biomimetics, Biomaterials and Biomedical Engineering 22 (March 2015): 21–28. http://dx.doi.org/10.4028/www.scientific.net/jbbbe.22.21.

Full text

Abstract:

Forward Kinematic simulation of a 6 DOF surgical robot tracking a path through the constraint of the Remote Center of Motion point (RCM) is developed in this paper. Theoretical calculations of the forward kinematics are analyzed by solving the configuration kinematic equations of the robot. CAD prototype of the surgical robot and the patient are created using CATIA5 part and assembly tools. The theoretical results are validated through a Kinematic simulation of CATIA kinematics. The simulation results confirm the usefulness of the six revolute joint robots in minimally invasive surgery (MIS) a

APA, Harvard, Vancouver, ISO, and other styles

3

Belogurov, S., Yu Berchun, A. Chernogorov, P. Malzacher, E. Ovcharenko, and A. Semennikov. "CATIA-GDML geometry builder." Journal of Physics: Conference Series 331, no. 3 (2011): 032035. http://dx.doi.org/10.1088/1742-6596/331/3/032035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Mao, Peng Jun, Fu Zhang, and Guo Ying Zhang. "Data Exchange Method between ADAMS, CATIA and Solid Works Software." Applied Mechanics and Materials 143-144 (December 2011): 422–27. http://dx.doi.org/10.4028/www.scientific.net/amm.143-144.422.

Full text

Abstract:

Three kinds of data transmission standards of IGES, parasolid and STEP on the SolidWorks and ADAMS software were contrasted to get the Parasolid for the most suitable software standards. CATIA 3D software has powerful function of modeling, but ADAMS has poor function of modeling. It has built the four feet completion institutions of 3D modeling by CATIA, then through among the middle media of SolidWorks software format to conversion and import CATIA 3D entity modeling into ADAMS/View environment to make up for the problem of insufficient ADAMS modeling ability. This paper focused on the discus

APA, Harvard, Vancouver, ISO, and other styles

5

Fang, Hui Min, Gang Zhao, Guo Zheng Zhang, and Ping Xiao. "The Research and the Development of the 3D System Platform of Shafting Parts Based on CAA." Key Engineering Materials 693 (May 2016): 1886–92. http://dx.doi.org/10.4028/www.scientific.net/kem.693.1886.

Full text

Abstract:

The enterprises when the designer worked with CATIA. In order to improve the efficiency, the research took the shaft parts as the research object to realize the secondary development of CATIA V5R18. The development platform of Shafting parts was set up through the embedded component development environment of CATIA CAA RADE and CAA API and was based on the development platform of VC++. At the end, this paper took the typical parts as examples to introduce the method of system operation. The test results show that this system could realize the rapid design and enhance the design efficiency, and

APA, Harvard, Vancouver, ISO, and other styles

6

A., Gujar, and Awasare A. "The Role of CATIA in Enhancing Engineering Design Processes." Recent Trends in Production Engineering 7, no. 2 (2024): 26–30. https://doi.org/10.5281/zenodo.12792729.

Full text

Abstract:

<em>This research paper explores the role of CATIA in enhancing engineering design processes. CATIA, developed by Dassault Systèmes, is leading CAD (Computer-Aided Design) software widely used in various engineering fields. This study investigates the capabilities of CATIA, including 3D modeling, simulation, and product lifecycle management (PLM), and examines its impact on design accuracy, efficiency, and collaboration. Through a comprehensive literature review, case studies, and comparative analysis with other CAD tools, the research highlights CATIA's advantages and challenges. The f

APA, Harvard, Vancouver, ISO, and other styles

7

Rojas-Sola, José Ignacio, Gloria del Río-Cidoncha, Rafael Ortíz-Marín, and José María López-Pedregal. "Design and Development of Sheet-Metal Elbows Using Programming with Visual Basic for Applications in CATIA." Symmetry 13, no. 1 (2020): 33. http://dx.doi.org/10.3390/sym13010033.

Full text

Abstract:

This article introduces an innovative application of Visual Basic for Applications (VBA) (Visual Basic macro language) developed in CATIA (Computer-Aided Three-Dimensional Interactive Application), computer-aided manufacturing and engineering design software. Said application enables the three-dimensional (3D) representation and development to be obtained on a plane of the surfaces of cylindrical and conical elbows utilised to join two conduits, since CATIA lacks tools for the design of elements of metal fabrication. The application permits the geometric and dimensional parameters necessary fo

APA, Harvard, Vancouver, ISO, and other styles

8

Yeiser, Alexander, Saulius Pavalkis, and Oleg Yakimenko. "Exploring the Executable SysML Capabilities to Integrate and Operate Hardware in the Loop." INCOSE International Symposium 34, no. 1 (2024): 2489–508. http://dx.doi.org/10.1002/iis2.13282.

Full text

Abstract:

AbstractThese days, systems engineers use advanced software tools and standardized modeling methods to break down complex systems into simpler, less complicated parts that are easier to understand. This includes CATIA Magic that allows for systems architecture, as well as more in‐depth Systems Modeling Language (SysML) modeling and simulation. The goal of this paper is to explore the capabilities of SysML to model and control hardware in the loop (HIL). The model of a weapon system was created using several different diagrams commonly used in SysML. When these diagrams are used together with t

APA, Harvard, Vancouver, ISO, and other styles

9

Ruhr, Hilko, Jan Niklas Lemke, and Alexander Piskun. "Insassenbasierte Konzeptauslegung für Fahrzeuge in Catia V5/Occupant-Based Vehicle Design in Catia V5." Konstruktion 68, no. 04 (2016): 83–88. http://dx.doi.org/10.37544/0720-5953-2016-04-83.

Full text

Abstract:

Inhalt: In der modernen Fahrzeugentwicklung ist die Konzeption der Fahrzeuge von innen nach außen eine häufig formulierte Anforderung. Tatsächlich werden früh im Entstehungsprozess hochkomplexe digitale Ergonomiewerkzeuge eingesetzt, um einen möglichst großen Teil der ergonomischen Auslegung abzusichern und die Anzahl der, monetär und zeitlich aufwendigen, physischen Erprobungen gering zu halten. Durch die immer kürzer werdenden Entwicklungszeiten und die steigende Modellanzahl besteht in der Automobilindustrie darüber hinaus der Bedarf, Prozesse zu standardisieren und zu verschlanken. Die vor

APA, Harvard, Vancouver, ISO, and other styles

10

Sulistiyanto, Muchlis, Siti Nurhidayah, Hasan Basri, et al. "Increasing Student Competency Through Catia V5 Software Training." Entrepreneurship and Community Development 1, no. 2 (2023): 82–89. http://dx.doi.org/10.58777/ecd.v1i2.135.

Full text

Abstract:

The current era demands that all aspects of engineering be carried out automatically, including creating technical drawings, which were previously done manually, now being replaced with drawings using CAD (Computer Aided Design) software, which offers automatic drawings. This problem impacts the industrial world, which requires skilled workers in the field of design. In the manufacturing industry, Catia V5 is widely used in product designs because it is faster and easier to use than paper and drawing tools. This Catia V5 Software training aims to improve students' 2D and 3D drawing abilities.

APA, Harvard, Vancouver, ISO, and other styles

11

K, Sandhya. "Structural Analysis of an Off-Road Vehicle Suspension System Using CATIA and ANSYS." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33001.

Full text

Abstract:

This project delves into the structural analysis of an off-road vehicle suspension system, employing cutting-edge software tools such as CATIA and ANSYS. Off-road vehicles necessitate robust suspension systems capable of withstanding harsh terrain conditions while ensuring vehicle stability, manoeuvrability, and passenger comfort. The study focuses on evaluating the structural integrity, performance, and behaviour of the suspension system under diverse load conditions and terrain scenarios. This project focuses on conducting a comprehensive structural analysis of an off-road vehicle suspension

APA, Harvard, Vancouver, ISO, and other styles

12

PRAKESH, A. N. S. SURYA. "SIMULATION AND OPTIMIZATION MATERIAL OF WIND TURBINE BLADE PROFILES USING CATIA AND ANSYS,." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33152.

Full text

Abstract:

I Wind energy is a fast-growing way to make power from wind, and it's good for the environment. Wind turbines have big blades that catch the wind to make electricity. This project is all about making those blades work better and cost less money. First, we use special computer programs called CATIA and ANSYS to design and test the blades. CATIA helps us design the shape and size of the blades, while ANSYS helps us see how strong they are and how well they catch the wind. We start by making different blade shapes in CATIA, changing things like length, width, and twist. Then we use ANSYS to test

APA, Harvard, Vancouver, ISO, and other styles

13

Yu, Yang, and Jia Jun Ren. "The Automobile Body Modelling Design Based on CATIA Surface Design Module." Applied Mechanics and Materials 709 (December 2014): 521–25. http://dx.doi.org/10.4028/www.scientific.net/amm.709.521.

Full text

Abstract:

The paper redesigning some brand automobile body modelling based on CATIA surface design module,In the redesigning process summarizing the design method of automobile body modelling design about CATIA software, so as to shortening the automobile development cycle, reducing the cost, improving the efficiency.

APA, Harvard, Vancouver, ISO, and other styles

14

Papić, Sajfo, and Elida Hasanović. "METHODOLGY, TOOLS AND POSSIBILITIES OF STRUCTURAL ANALYSIS OF THE HOOK IN ASSEMBLY OF THE LOWER PULLEY IN CAD/CAE SYSTEM CATIA." Mašinstvo 15, no. 1 (2018): 21–30. https://doi.org/10.62456/jmem.2018.01.021.

Full text

Abstract:

&lt;p style=&quot;text-align: justify;&quot;&gt;This paper presents the methodology of the FEM modeling of the hook and provides a description of the possibility of tools of the module for structural analysis in the CAD / CAE CATIA system. The tools are described for defining: constraints, loads, shapes and types of contacts on the example of the hook, a lower pulley assembly, for which the FEM model is formed and a structural analysis is performed. The structural analysis in CATIA is performed using the finite element method, whereby the observed model is discretized, i.e., is

APA, Harvard, Vancouver, ISO, and other styles

15

Xiao, Liang, and Rong Man Li. "Advanced Methods of Gas Turbine Reducer Design and its Analyses." Applied Mechanics and Materials 86 (August 2011): 767–70. http://dx.doi.org/10.4028/www.scientific.net/amm.86.767.

Full text

Abstract:

Advanced methods of gas turbine reducer design and analyses with CATIA and MASTA are introduced. After gear parameter matching, a three-dimensional CATIA model has been established and imported into MASTA. After careful analyses, a high-performance gas turbine reducer has been designed to meet the clients’ demand.

APA, Harvard, Vancouver, ISO, and other styles

16

Wu, Yong Kang, Yuan Ying Qiu, Chun He Li, and Ying Sheng. "Automatic Generation of the CAE Parametric Model from the CATIA Model for an Aircraft Hydraulic Tube Structure." Advanced Materials Research 291-294 (July 2011): 2250–55. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.2250.

Full text

Abstract:

In order to help the designers estimate the dynamic response of the aircraft hydraulic tubes in the working environment, a design and simulation software is developed based on CATIA and ANSYS using VB as the developing tool. This paper concentrates on the part of auto-modeling and introduces the key technologies to automatically extract the CATIA model data and build the CAE parametric model of aircraft hydraulic tube structure in ANSYS. It provides an approach to transfer a CATIA model into a CAE model conveniently which reduces the time for FE (Finite Element) analysis and makes the designer

APA, Harvard, Vancouver, ISO, and other styles

17

Li, Guo Chang. "Research on Welded Pipe and Tube Pass Design Virtual Methods." Advanced Materials Research 690-693 (May 2013): 2643–46. http://dx.doi.org/10.4028/www.scientific.net/amr.690-693.2643.

Full text

Abstract:

Welded pipe and special pipe get more and more applications; however, the difficulty of pass design method limits welded pipe manufacture. The paper discusses welded pipe roll pass design method based on CATIA, and roll CAD/CAPP computer aided design system based on AutoCAD, and gives roll virtual design methods which use roll CATIA, CAD/CAPP system.

APA, Harvard, Vancouver, ISO, and other styles

18

Yang, Ye Guang, and Shi Hui Guo. "The Off-Line Programming System of Robot Based on CATA Platform." Advanced Materials Research 482-484 (February 2012): 801–4. http://dx.doi.org/10.4028/www.scientific.net/amr.482-484.801.

Full text

Abstract:

This thesis analyzes the off-line programming system of spraying robot, and study several keys of off-line programming. According to the characteristics of CATIA V5 document structure, a technical scheme for developing off-line programming is proposed. In this scheme, the off-line programming is developed based on CATA platform using CATIA Automation and CAA VC++.

APA, Harvard, Vancouver, ISO, and other styles

19

Maluth Manyaqng, Nuerater. "4 WEEKS WORKSHOP REPORT ON CATIA." Journal of Latin American Sciences and Culture 2, no. 2 (2020): 5–9. http://dx.doi.org/10.52428/27888991.v2i2.46.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Pengfei, Tian, Luo Yiping, Zhou Feng, and Yuan Shu. "CATIA-Based Urban Mini EV Design." Open Mechanical Engineering Journal 9, no. 1 (2015): 346–50. http://dx.doi.org/10.2174/1874155x01509010346.

Full text

Abstract:

This article introduces a mini EV for urban single drive, a the car intended to work as conveyance for city workers, thereby relieving urban traffic pressure, improving traffic congestion and reducing urban pollution. The paper primarily designs a electric reversed tricycle and determines its motor and battery parameters, fixes the cockpit installation location by ergonomics, and finally completes vehicle arrangement. CATIA is mainly used for modeling and ergonomics analysis during the design process.

APA, Harvard, Vancouver, ISO, and other styles

21

Chen, Ze Zhong, Kai Fan, and Zhen Liang Lou. "Key Technology and Development on Side Pattern CAD/CAM on Mould for Auto Lamp." Advanced Materials Research 97-101 (March 2010): 370–73. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.370.

Full text

Abstract:

A model of side pattern CAD/CAM on mould for auto lamp integrated with CATIA V5 is built. After analyzing the properties of design and the manufacture of side pattern on mould for auto lamp, key technology, such as grouping, sorting, determination of continuity, fairing and fitting of side pattern curves, generating of NC files and G codes, are presented. Using out-process redeveloping tools of CATIA V5, a CATIA V5 integrated side pattern CAD/CAM system for mould of auto lamp is developed. At last, a practical example shows that the technology and the software satisfy the design and manufactur

APA, Harvard, Vancouver, ISO, and other styles

22

Kumari, Y. Jaya Santhoshi. "Gear Train Optimization of High Speed Machinery by using CATIA and ANSYS." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33793.

Full text

Abstract:

This project aims to optimize gear trains for high-speed machinery using CATIA and ANSYS. Gear trains are crucial in various mechanical systems, especially in high-speed applications where efficiency and reliability are essential. The objective is to combine CATIA for designing and modelling gear trains with ANSYS for analysing their performance under high rotational speeds. Helical gear train use for Reverses Motion design as per requiment of power and motor speed. Same design check for maximium load by load on pinion taken as step of 13K, 15K, 20K, 25K and 30K Newtons are applied on helical

APA, Harvard, Vancouver, ISO, and other styles

23

Cui, De Li, Yi Tong Li, and Hong Zhuang Zhang. "Finite Element Analysis on Bending Stress of Generating Spur Bevel Gear Based on ANSYS." Advanced Materials Research 490-495 (March 2012): 2546–49. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.2546.

Full text

Abstract:

The meshing generating spur bevel gear is presented by the method for precise modeling of gear in software Catia. Then by the excellent data exchange interface between Catia and ANSYS, the model can be transferred into ANSYS and bending stress of the gear tooth is calculated with finite element method ( FEM),which proposed design theory basis of generating spur bevel gear.

APA, Harvard, Vancouver, ISO, and other styles

24

Gajbhiye, Manoj T., Suman Das, Chandan Das, and Debamalya Banerjee. "Postural Assessment of Indian Excavation Workers and Prototype Design of Virtual Iron-Pan." International Journal of Experimental Research and Review 36 (December 30, 2023): 388–404. http://dx.doi.org/10.52756/ijerr.2023.v36.034.

Full text

Abstract:

The study was conducted among excavation labourers of the construction sites for five different tasks. Five postures were selected from the video recorded at the time of data collection. Analysis of static/dynamic working postures and loads on the various body parts are being done using computer software's which is not possible manually nowadays. In this study, the postures of excavation labourers were assessed using CATIA software during five various excavation operations. Digital Human Analysis (DHM) was developed in the CATIA software for study. RULA, REBA, biomechanical and lifting analysi

APA, Harvard, Vancouver, ISO, and other styles

25

Zhu, Zhi Han, and Hang Cao. "Based on CATIA Car Side Welding Fixture Design and Research." Applied Mechanics and Materials 721 (December 2014): 32–35. http://dx.doi.org/10.4028/www.scientific.net/amm.721.32.

Full text

Abstract:

Based on using CATIA tools for car side around the welding jig are studied, by means of CATIA platform welding jig design, according to the design flow chart, produce drawings, it is advantageous to the reasonable arrangement of assembly line production, facilitate balanced location time, reduce the non-production season with lower production cost, improve the quality of automobile body design efficiency and design purpose.

APA, Harvard, Vancouver, ISO, and other styles

26

Haba, Sever Alexandru, and Gheorghe Oancea. "Design and Manufacturing Optimization of Single-Cylinder Engine Block Prototype Using CATIA Environment." Applied Mechanics and Materials 474 (January 2014): 165–70. http://dx.doi.org/10.4028/www.scientific.net/amm.474.165.

Full text

Abstract:

This paper presents a complex project, implemented in CATIA V5 environment, used for mechanical design and prototype obtaining of the single-cylinder engine block. The main features which are implemented allow reducing the time for design, using the end user design parameters for the prototype manufacturing, reducing the material consumption, optimization of the numerical control technology for milling process. The paper also presents a software system, developed with Visual Basic in CATIA environment, which can be used to automate the process of 3D model generating, creating the data files fo

APA, Harvard, Vancouver, ISO, and other styles

27

Butila, Eugen Valentin. "Expert System for Designing Shaft-Bearing-Gear Transmission Assemblies." Applied Mechanics and Materials 245 (December 2012): 156–61. http://dx.doi.org/10.4028/www.scientific.net/amm.245.156.

Full text

Abstract:

An Intelligent Integrated CAD system applied in mechanical engineering design for selection, calculation and design embodiment of shaft-bearing-gear is presented in the paper. The CAD activities in correlation with the expert system are defined according to a given expertise domain, design of mechanical systems, which is supposed to take into account and operate with two information type: knowledge and data. Final results and concrete example are performed using CAD/CAE/CAM software, CATIA environment. Knowledge and databases processing for application presented in this paper use specific prog

APA, Harvard, Vancouver, ISO, and other styles

28

Pawan, Kumar. "STUDY OF VARIOUS NACA SERIES AEROFOIL SECTIONS AND WING CONTOUR GENERATION USING CATIA V5." Aerospace Engineering: An International Journal (AEROIJ) 1, no. 1 (2019): 1–8. https://doi.org/10.5281/zenodo.3552403.

Full text

Abstract:

<strong>ABSTRACT </strong> Aerofoil is the basic part to be designed during starting stage of creating a new airplane. It is the part that forms of cross section of the wing. The wing is used to produce lift force that balances the weight which acts downwards. Velocity variation creates pressure difference over top and bottom surface of wing. The pressure difference over top and bottom surface of wing creates lift. In this paper, we studies about aerofoil and its basic types and various NACA series and equation of 4 digit NACA series. In this paper, we come to know how we can export an aerofoi

APA, Harvard, Vancouver, ISO, and other styles

29

Georgeta, Haraga, Ghelase Daniela, and Daschievici Luiza. "Design and Analysis of a Coffee Table." International Journal of Computational and Applied Mathematics & Computer Science 2 (June 4, 2022): 29–32. http://dx.doi.org/10.37394/232028.2022.2.6.

Full text

Abstract:

This paper focuses on the design and finite element analysis (FEA) of coffee table with center hole can be used with or without umbrella. Therefore, for a better graphic performance we have used CATIA V5 that allows the 2D/3D solids modeling with geometric constraints. In CATIA, we can simulate the whole very easy thing within a virtual reality (VR) using the applications called „Part Design and Generative Structural Analysis”.

APA, Harvard, Vancouver, ISO, and other styles

30

Yin, Hai Jun, Yang Bai, and Hai Xia Wu. "The Application of CATIA Law Line Method in Parts Design of the Variable Thickness Boom." Applied Mechanics and Materials 198-199 (September 2012): 141–45. http://dx.doi.org/10.4028/www.scientific.net/amm.198-199.141.

Full text

Abstract:

This paper summarizes the characteristics of variable thickness boom parts. The article discusses the principle of the CATIA Law line and the application of CATIA Law line method in parts design of the variable thickness boom, and solves the technical problem that the boom thickness can't linear and smooth change when we design parts. We have given two kind of the design operation process of variable thickness boom parts.

APA, Harvard, Vancouver, ISO, and other styles

31

Tang, Xin. "Motion Simulation and Optimization Study of Manipulator with 4-Dof Based on Hydraulic Driving." Applied Mechanics and Materials 246-247 (December 2012): 1170–74. http://dx.doi.org/10.4028/www.scientific.net/amm.246-247.1170.

Full text

Abstract:

This article conducts a detailed research on design of specific robot with 4-Dof based on hydraulic driving, using the advanced CATIA to achieve the motion simulation and applying ANSYS to optimize structure of main parts by finite elements analysis. D-H coordinate system and the homogeneous coordinate transformation matrix are used to describe the posture and position of robot, which give the kinematics equations of the robot .With the result of simulation and design by CATIA, interference between each part of the robot is examined and eliminated in advance. ANSYS analysis gives the result of

APA, Harvard, Vancouver, ISO, and other styles

32

LI, Fu Xing. "The Application Research on Ergonomics Based on the CATIA Software Platform." Applied Mechanics and Materials 651-653 (September 2014): 2050–54. http://dx.doi.org/10.4028/www.scientific.net/amm.651-653.2050.

Full text

Abstract:

Through the ergonomic analysis module that is based on the CATIA software platform, the virtual human body model is introduced into the rescue cabin digital module of ambulance and thus the virtual man-machine relationship is established; meanwhile, the theories of ergonomics are employed as guidance for the optimization design of rescue cabin so as to probe into how the CATIA-based ergonomic analysis module is applied in product development and design.

APA, Harvard, Vancouver, ISO, and other styles

33

Zhang, Kai Xing, Xian Xi Liu, and Yu Liang Wang. "The Digital Design of Engine Connecting Rod Based on the CATIA." Advanced Materials Research 904 (March 2014): 442–45. http://dx.doi.org/10.4028/www.scientific.net/amr.904.442.

Full text

Abstract:

Since it is too complex to make the engine connecting rod design digital and too amount of work to make mistakes, a method based on the CATIA to achieve the engine connecting rod digital design is proposed. Firstly, the parameterized modeling of connecting rod is completed based on secondary development of CATIA. And then, the finite element analysis is applied to the model. Finally, the analysis results verify the effectiveness of the proposed method.

APA, Harvard, Vancouver, ISO, and other styles

34

Rokyta, Luboš, and Ondřej Bílek. "Design of a Casting Die in CATIA." Manufacturing Technology 12, no. 1 (2012): 80–82. http://dx.doi.org/10.21062/ujep/x.2012/a/1213-2489/mt/12/1/80.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Yang, Zheng Xiao, and Gang Yang. "Catia Template Design of Auto Rear Axle." Applied Mechanics and Materials 668-669 (October 2014): 1659–62. http://dx.doi.org/10.4028/www.scientific.net/amm.668-669.1659.

Full text

Abstract:

The rear axle structure is studied and analyzed, and the skeleton structure, elements and parameters provided in advance in the template are introduced briefly. Taking a typical part of rear axle for instance, using Catia software to design product template, so as to shorten the product development cycle.

APA, Harvard, Vancouver, ISO, and other styles

36

Urdea, Mihaela, and Silviu Butnariu. "Consideration about Elastic Couplings Modeled in CATIA." Applied Mechanics and Materials 657 (October 2014): 760–64. http://dx.doi.org/10.4028/www.scientific.net/amm.657.760.

Full text

Abstract:

This paper refers to an elastic shaft coupling named Vulkan coupling, with its general behavior. Vulkan shaft couplings link two shafts in diesel-engine and electric drives. They are simple from the construction point of view, are easily mounted and dismounted. Parts and assembly modeling, preprocessing, processing and post processing can be performed using all leading CAD tools, like CATIA. The main goal of this work is to generate a finite element model for a Vulkan coupling, using FEM Solid (FMD). For the demonstration, a Vulkan coupling with a torque of 350 Nm has been chosen. At the end o

APA, Harvard, Vancouver, ISO, and other styles

37

Dagersten, Inge. "Saab Dynamics upgrades to CATIA Version 4." Aircraft Engineering and Aerospace Technology 68, no. 3 (1996): 35–38. http://dx.doi.org/10.1108/eb037638.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Hussein, H. M. A. "Computer Aided Blanking Die Design Using CATIA." Procedia CIRP 18 (2014): 96–101. http://dx.doi.org/10.1016/j.procir.2014.06.114.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Banerjee, Siddhartho K., Percey Thomas, and Xiao Cai. "CATIA V5-Based Parametric Aircraft Geometry Modeler." SAE International Journal of Aerospace 6, no. 1 (2013): 311–21. http://dx.doi.org/10.4271/2013-01-2321.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Măgurian, Daniel, and Gheorghe Oancea. "Design Methodology of Laminating Tools." Applied Mechanics and Materials 657 (October 2014): 121–25. http://dx.doi.org/10.4028/www.scientific.net/amm.657.121.

Full text

Abstract:

This paper presents a design methodology of laminating tools for automotive interior parts using CATIA software package. The authors developed a software tool namedLTFrameDesignusingVBA for Applicationunder CATIA package, which automatically generates the main frame of the laminating tool according to the parts shapes, its dimensions and designer requirements. The software automates some stages of standard design and minimizes the design time and costs. The paper also presents the design stages which are followed by the user to obtain a 3D complete assembly of the laminating tool.

APA, Harvard, Vancouver, ISO, and other styles

41

Immannulloh, Dimas, and Tranggono Tranggono. "Ergonomic Analysis of Working Positions in Petis Processing with the RULA Method at UD Murni Sidoarjo." IJIEM - Indonesian Journal of Industrial Engineering and Management 5, no. 2 (2024): 564. https://doi.org/10.22441/ijiem.v5i2.22381.

Full text

Abstract:

UD Murni Sidoarjo is a company that focus on making petis as traditional food of Sidoarjo. But, often they experience ergonomic problems which results in Work Related Musculoskeletal Disorders (WRMSDs) for their workers. The method that used in this study, namely Rapid Upper Limb Assesment (RULA) which is a method for assessing posture, style, and movement of an activity related to upper limb users. The main objective in this study is to analyze the working postures of filters sector from petis processing industry by using Rapid Upper Limb Assesment (RULA) in CATIA V5R21 software. 5 out of 5 w

APA, Harvard, Vancouver, ISO, and other styles

42

Zhang, Chao, and Zhi Hong Zhang. "Design of the Globoidal Cam Mechanism Based on MATLAB and CATIA." Applied Mechanics and Materials 716-717 (December 2014): 720–23. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.720.

Full text

Abstract:

Working profile of Globoidal indexing cam is a complex surface. 2D mechanical drawing is difficult to describe it clearly. With the development of computer technology, the 3D design software such as CATIA, Pro-E, Solidworks, UG/NX, the solid and surface function of them make productions more excellent. Globoidal indexing cam profile equations firstly was studied, the geometric size of the globoidal indexing cam mechanism was calculate, and then use MATLAB to calculate the globoidal indexing cam contour surface 3D coordinates of points, finally completed the three-dimensional modeling of globoi

APA, Harvard, Vancouver, ISO, and other styles

43

Zhang, Guang Guo, Zhi Bin Chang, and Hai Tao Liu. "Parametric Modeling for Globoidal Cam Based on CATIA/CAA." Applied Mechanics and Materials 88-89 (August 2011): 236–39. http://dx.doi.org/10.4028/www.scientific.net/amm.88-89.236.

Full text

Abstract:

The design and machining of globoidal cam is difficult,because the shape of working surface is complex,and the curved surface of its space is undevelopable. Based on the above reasons,we proposed the parametric Modeling method for globoidal cam based on CATIA/CAA. Through the secondary development of CATIA,we realized the parameterized modeling of globoidal cam using the modelling mothods based on the feature model,it made the design process simplified,improved the efficiency of design,provided a new solution for the design of globoidal cam.

APA, Harvard, Vancouver, ISO, and other styles

44

Fang, Li Yong, Xu Dong Yin, Hai Huang Zhang, and Hui Li. "Design and Implementation of 2D Elevation Annotation in Hydropower Project Designbased on CATIA/CAA." Applied Mechanics and Materials 501-504 (January 2014): 2093–96. http://dx.doi.org/10.4028/www.scientific.net/amm.501-504.2093.

Full text

Abstract:

When CATIA software is used for hydropowerproject design, elevation annotation in 2D drafting workbench is a complicated process that brought extremely inconvenience to designers. In order to solve the problem, a method of 2D elevation annotation based on UDF(user defined feature) is proposed in this paper. Then, a 2D elevation annotation tool based on proposed method is developed and implemented through CAA(Component Application Architecture) development tool of CATIA V5R19 software.At last,several annotation results are illustrated and the developed tool is proven to meet the demands of 2D e

APA, Harvard, Vancouver, ISO, and other styles

45

., Sinoj, M. Dev Anand, and N. Ramasamy. "Modeling and Analysis of Micro Gas Turbine Compressor Different Parts." International Journal of Engineering & Technology 7, no. 4.36 (2018): 822. http://dx.doi.org/10.14419/ijet.v7i4.36.24540.

Full text

Abstract:

The work displayed in the report is an endeavor at planning a miniaturized scale turbine of a given measurement. Broad writing audit was done to contemplate the different perspectives and utilizations of small scale turbines. An appropriate outline methodology was looked over the accessible strategies to plan distinctive parts of miniaturized scale turbine. CATIA is utilized broadly to make parts with diff sorts of tasks. At that point every one of the parts are collected for making a total turbine in CATIA Get together area. At that point they are sending for fast prototyping.

APA, Harvard, Vancouver, ISO, and other styles

46

Teja, S. Sai. "MODELLING AND ANALYSIS OF HEAT EXCHANGER." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33533.

Full text

Abstract:

Shell and tube heat exchangers in their various construction modifications are probably the most widespread and commonly used basic heat exchanger configuration in the process industries. The modelling of the heat exchanger has done by using the advanced design software CATIA. In this project the Heat Exchanger is modelled and assembled with the help of CATIA and the component is meshed and analysis is done in ANSYS software and the thermal and static behaviour is studied and the results are tabulated. The various stresses acting on the Heat Exchanger under various loading conditions has been

APA, Harvard, Vancouver, ISO, and other styles

47

T., Venkata Ramana, Kunta Subhash Sagam, and Devendra Kumar |. Vanga Balakrishna Sangem. "Modelling and 3D Printing of Crankshaft." International Journal of Trend in Scientific Research and Development 3, no. 3 (2019): 1039–43. https://doi.org/10.31142/ijtsrd23224.

Full text

Abstract:

Power from the burnt gases in the combustion chamber is delivered to the crankshaft through the piston, piston pin and connecting rod. The crankshaft changes reciprocating motion of the piston in cylinder to the rotary motion of the flywheel. Crankshaft is designed for multi cylinder engine and its 3D model is created using modeling software CATIA V5R20.The 3D printer prints the CATIA design layer by layer forming a real object. 3D printing process is derived from inkjet desktop printers in which multiple deposit jets and the printing material, layer by layer derived from the CATIA data. 3D pr

APA, Harvard, Vancouver, ISO, and other styles

48

Han, Yana, Yuan Liu, Yu Li, Chen Dang, and Tianyu Dang. "Batch Annotation Method and Implementation of Water Conservancy and Hydropower Engineering Drawings Based on CATIA V6." ce/papers 8, no. 2 (2025): 1295–306. https://doi.org/10.1002/cepa.3216.

Full text

Abstract:

AbstractCATIA plays an important role in the design process of hydraulic and hydropower engineering, but there are issues such as difficulty in generating engineering drawings and low efficiency in producing these drawings. This paper addresses these issues by researching a batch annotation method for hydraulic and hydropower engineering drawings based on CATIA V6. Firstly, drawing standards are formulated to provide uniform specifications for subsequent annotations. Secondly, a 2D component resource library is established to solve the problem of missing conventional hydraulic and hydropower a

APA, Harvard, Vancouver, ISO, and other styles

49

Tanos, Vasilios, Marios Neofytou, Ahmed Samy Abdulhady Soliman, Panayiotis Tanos, and Constantinos S. Pattichis. "Is Computer-Assisted Tissue Image Analysis the Future in Minimally Invasive Surgery? A Review on the Current Status of Its Applications." Journal of Clinical Medicine 10, no. 24 (2021): 5770. http://dx.doi.org/10.3390/jcm10245770.

Full text

Abstract:

Purpose: Computer-assisted tissue image analysis (CATIA) enables an optical biopsy of human tissue during minimally invasive surgery and endoscopy. Thus far, it has been implemented in gastrointestinal, endometrial, and dermatologic examinations that use computational analysis and image texture feature systems. We review and evaluate the impact of in vivo optical biopsies performed by tissue image analysis on the surgeon’s diagnostic ability and sampling precision and investigate how operation complications could be minimized. Methods: We performed a literature search in PubMed, IEEE, Xplore,

APA, Harvard, Vancouver, ISO, and other styles

50

Zhang, Wenguo, Le Zhang, Pei Lei, and Xiaobo Jin. "Automated Solving Algorithm and Application for Oriented Bounding Box Based on Principal Axis of Inertia." Journal of Physics: Conference Series 2101, no. 1 (2021): 012007. http://dx.doi.org/10.1088/1742-6596/2101/1/012007.

Full text

Abstract:

Abstract In mechanical design and manufacture, the minimum size of raw material of each part should be measured before processing. Generally, this size could be equal to the size of minimum bounding box. When the assembled parts of a product reach an enormous quantity, the measurement would be a rough work. This paper introduced an automated solving algorithm for the oriented bounding box based on principal axis of inertia, combined with CATIA structural tree recursive traversal algorithm according to CAA V5 Automation API, to implement an automated solution of the engineering acceptable minim

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!