Relevant bibliographies by topics / Cc2640

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Cc2640'

Author: Grafiati
Published: 4 June 2021
Last updated: 16 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cc2640.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cc2640"

1

Yin, Feng Ling, Bing Quan Huo, Hai Bo Wang, and Long Cheng. "A Design for Power Supply Monitoring." Advanced Materials Research 912-914 (April 2014): 1061–64. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.1061.

Full text
Abstract:
Monitoring servers' power is very important, and a design is present for solving existed issues. Building a wireless network with Zigbee technology, there are major modules:End Device with chip CC2530, Zigbee Router with chip CC2530 and CC2591, Zigbee coordinator with chip CC2530 and CC2430.
APA, Harvard, Vancouver, ISO, and other styles
2

Kraincuk, P., G. Ihra, F. Vorbeck, A. Kepka, C. Schabernig, and A. Aloy. "A new method of quantification of atelectatic areas: a pilot study." Critical Care 2, Suppl 1 (1998): P111. http://dx.doi.org/10.1186/cc240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Van der Linden, T., V. Chieux, P. Cabaret, G. Forzy, B. Lepoutre, and JL Dhondt. "Measuring dobutamine (Db) clearance during continuous hemofiltration (CHF)." Critical Care 2, Suppl 1 (1998): P131. http://dx.doi.org/10.1186/cc260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Roberts, PC, NH Boyle, AC Barber, B. Ng, A. McLuckie, and RJ Beale. "Regional variation in gastric intramucosal pCO2 may confound tonometric measurement: an evaluation using two tonometers and continuously recirculating gas tonometry." Critical Care 2, Suppl 1 (1998): P135. http://dx.doi.org/10.1186/cc264.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yoo, Hyun-Ho, and Byung-Jae Choi. "Design of CC2540-based Route Guidance System for Visually Impaired Person." IEMEK Journal of Embedded Systems and Applications 11, no. 1 (February 29, 2016): 47–56. http://dx.doi.org/10.14372/iemek.2016.11.1.47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xin, Zheng Hua, Hong Mei Lu, Liang Yi Hu, and Jing Zhou. "The Device Design of Driving Cars Astern Based on the Wireless Sensor Networks Node." Advanced Materials Research 542-543 (June 2012): 989–92. http://dx.doi.org/10.4028/www.scientific.net/amr.542-543.989.

Full text
Abstract:
This work uses a Wireless Sensor Networks(WSN) module to design the device of driving cars astern. The WSN node integrates MCU CC2430 and MCU C8051F120. CC2430 has 2.4 GHz IEEE 802.15.4 compliant RF transceiver. The device of driving cars astern can play a more important role when CC2430 communicates with C8051F120. This paper shows how to design an device of driving car astern. It should be applied widely.
APA, Harvard, Vancouver, ISO, and other styles
7

Xin, Zheng Hua, Xiao Yin Wu, Qian Zhang, and Liang Yi Hu. "Research on the Communication of the Serial Port between the Host Personal Computer and CC2430." Advanced Materials Research 791-793 (September 2013): 1974–77. http://dx.doi.org/10.4028/www.scientific.net/amr.791-793.1974.

Full text
Abstract:
The system completes the communication between the personal computer and the CC2430 by the serial port. The serial port is not the RS232 serial port but a port from A type to the USB port. The phenomenon of the experiment is displayed with the help of the serial debugging assistant. The operator can send the data and receive it from the personal computer to the CC2430 on the computer. On the other side, the CC2430 is able to receive the data from the host computer and send it to the host computer. This realizes the operator controls the CC2430 by the personal computer. It consists the hardware part and the software part.
APA, Harvard, Vancouver, ISO, and other styles
8

Hu, Si Quan, Yu Fu, Chun Dong She, and Hui Yao. "Enabling Zigbee Communications in Android Devices." Advanced Materials Research 756-759 (September 2013): 2125–30. http://dx.doi.org/10.4028/www.scientific.net/amr.756-759.2125.

Full text
Abstract:
Android is one of the most popular smart phone and tablet platforms; Zigbee is the standard for home automation and will play an important role on future WPAN. Enabling the Zigbee communication on Android can exploit the rich network and nice display power of the Android phone in Zigbee applications. In this paper we present our work on integrating CC2530 into an Android smart phone. Based on JNI library, the software is developed to enable Android system can control the CC2530 module insides. The firmware in CC2530 is also discussed. The test is carried on with the configuration that an Android smart phone communicates with a standalone CC2530 node via Zigbee radio. The test verified the design feasibility.
APA, Harvard, Vancouver, ISO, and other styles
9

Yan, Liang Wen, Li Na Zhao, and Teng Fei Li. "The Design of Signals Acquisition System Based on DSP and Wireless Transmission Device." Applied Mechanics and Materials 198-199 (September 2012): 1789–93. http://dx.doi.org/10.4028/www.scientific.net/amm.198-199.1789.

Full text
Abstract:
By analyzing the characteristics and working principles of DSP series chip and TI’s RF chip, choose TMS320F2812 and CC2530 to realize data acquisition and wireless transmission. By SCI interface, the device finishes the data transmission between DSP and CC2530 ,and the wireless transmission between two CC2530 chips . In the paper , first introduce the hardware and software design of the device and then prove the feasibility of the device by drawing waveform of actual datum which are transmitted and received using the device .
APA, Harvard, Vancouver, ISO, and other styles
10

Su, Jun Feng, Shuai Hua Nie, and Shao Cheng Qu. "Design of Multi-Point Wireless Pulse Measuring System Base on CC2530/Zigbee Network." Applied Mechanics and Materials 401-403 (September 2013): 1200–1203. http://dx.doi.org/10.4028/www.scientific.net/amm.401-403.1200.

Full text
Abstract:
A multi-point wireless pulse measuring system based on CC2530 is discussed. By using a PVDF pressure sensor, human pulse signal is picked up. Then a filter circuit and a amplification circuit are designed to obtain accurate and stable signal. Based on single-point pulse measuring, multi-point wireless pulse measuring system based on CC2530/ZigBee network is constructed, and a data managing system based on LabVIEW is designed to deal with these signals. Finally, experiment is provided to show the effectiveness of the proposed scheme. Keywords: Pulse; CC2530; ZigBee; LabVIEW; PVDF
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Cc2640"

1

Forsmark, Christopher. "Investigation of magnetic sensors and hardware design of a sensor platform for human-computer interaction purposes." Thesis, Linköpings universitet, Fysik och elektroteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-143872.

Full text
Abstract:
Company A develops algorithms and hardware for the application of magnet tracking, to be able to use a dipole magnet as an interaction tool between humans and computers. This master thesis investigates the available magnetic sensors through a market survey and practical testing of a selection of the sensors in purpose to determine the most suitable magnetic sensor and magnetic sensor technology for the application of magnet tracking. With the most suitable sensor found in the investigation, a sensor platform is designed and manufactured. The sensor HMC5983 from Honeywell is found to be the most suitable sensor and is designed into the sensor platform, which also includes ,for instance, a wireless MCU, CC2640 from Texas Instru- ments, together with a PCB antenna and a PSU including a battery charger, BQ24075 from Texas Instruments. The most suitable mag- netic sensor technology was found to be magnetoresistive sensors. The sensor platform was designed according to the requirements and is working good enough to enable company A to start testing their algorithms for magnet tracking on the new platform.
APA, Harvard, Vancouver, ISO, and other styles
2

Jamal, Muhammad Asif. "A TinyOS Testbed for CC2420 Transceivers." Thesis, Mittuniversitetet, Avdelningen för informations- och kommunikationssystem, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-20294.

Full text
Abstract:
Wireless Sensor Networks (WSNs) have gained significant consideration these days, as opposed to wired sensor networks, by introducing multi-functional wireless nodes, which are smaller in size. The main advan-tage is that its wireless, so it costs less to install, maintain and reconfig-ure. These sensor nodes are used in various application areas. For ex-ample: residential, industrial, environmental and military application areas. However WSNs communication is prone to negative influences from the physical environment, such as physical obstacles and interfer-ence. Algorithms must be developed for handling these problems and also to investigate the channel properties. The purpose of this work is to design a testbed, which enables the communication of wireless sensor nodes, to capture the properties of the channel, which will, in the long run, enable better solutions to be designed which are, more appropriate to the errors in the channel. In this testbed, one channel, from the IEEE 802.15.4 channels spectrum, is dedicated as an emergency channel, which is used for handshaking and to handle channel/external interfer-ence or hardware failure between the communication of Transmitter (TX) and Receiver (RX) nodes. The remaining 15 channels are called data channels and are used for actual data transmission and control signals. Peer to Peer transmission of a transmitter-receiver pair is achieved with the introducing of beacons and acknowledgment (ACK) packets. The testbed also has the property of dual reception and data logging on a single PC by maeans of two RX nodes simultaneously from a single TX node. The dependency of the packet on the “Frame Length” byte(in the Frame header) during the reception is eliminated so that if the “Frame Length” byte is compromised, it will replace the programmer defined value with the “Frame Length” byte which helps to investigate the actual packets byte sent from the TX. Also, the Received Signal Strength (RSS) is calculated at the maximum sample rate of the channel. Power consumption is not considered in this testbed. The work is conducted on both the IEEE 802.15.4 physical and the application layers. Linux based TinyOS-2.x is used as an operating system for low power sensor devices. New algorithms are designed for each step in the development of the testbed. MICAz motes are used as nodes and an MIB520 programming board is used for burning the codes and for the purpose of gateways.
APA, Harvard, Vancouver, ISO, and other styles
3

Agrawal, Ambuj. "Implementation of Application Layer Protocol for an Active RFID System." Thesis, Virginia Tech, 2011. http://hdl.handle.net/10919/34961.

Full text
Abstract:
The emerging technology of active RFID tags has strong potential in the areas of real time health monitoring, sorting of cargo, and large scale inventory management because of their longer communication range and larger data storage capacity. The market of active RFID is growing very rapidly and therefore there has been an increase in the number of companies engaging in this field. But very often it is found that the products available in the market are not always suited to the application at hand. To overcome this problem, off the shelf active RFID products which were reconfigurable and followed a standard PHY and MAC layer protocol were used for this work. By reprogramming the application layer protocol of the RFID hardware, these devices were made suitable for the desired application. This also allowed the RFID tags to extend their functionality by interfacing extra modules with themselves. The work presented in this thesis describes the way in which the microcontroller on board the active RFID tags and readers can be programmed so that the functionality of the RFID hardware can be changed as per requirements. It also shows that extra modules can be added to the tag by successfully interfacing an accelerometer module with the tag.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Yun, and Wenxuan Jiang. "Statistical Processing of IEEE 802.15.4 Data Collected in Industrial Environment." Thesis, Mittuniversitetet, Institutionen för informationsteknologi och medier, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-19619.

Full text
Abstract:
Wireless sensor network, which is constitute of autonomous sensors, is used for monitoring physical or environmental conditions like temperature, sound, pressure, and so on. The dispersed sensors or nodes will respectively pass their data through the network to the main location. Currently, several standards are ratified or in developing for wireless sensor network, like Wireless Hart, ISA, 100.11a, WIA-PAA, IEEE 802.15.4, etc. Among the standards, Zigbee is often used in industrial applications that require short-range and low-rate wireless transfer. In the research, all the data is collected under industrial environment using IEEE 802.15.4 compliant physical layer, some packets are interfered only by multi-path fading while others are also interfered by Wi-Fi interference. The goal of the thesis is to find out the dependence between the received power (RSS), correlation value (CORR) and bit error rate (BER) of the received message, and their distribution in situations both when the packet is lost or not. Besides, the performance of bit error rate such as the distribution and the features of burst error length under Wi-Fi interference or not will also be tested. All of them are based on a precise statistical processing.
APA, Harvard, Vancouver, ISO, and other styles
5

Wolfram, Ted. "Bridging two CAN-bus segments using radio communication with the IEEE 802.15.4 protocol." Thesis, Jönköping University, JTH, Computer and Electrical Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-622.

Full text
Abstract:

This thesis will investigate the possibilities to wireless communicate within time critical applications with the radio protocol IEEE 802.15.4.

IEEE 802.15.4 is a very quick protocol so the delays and jitter can be ignored in a small network.

The thesis handles the question: Is it possible to split a CAN-bus and send the data via radio to the other side of the CAN-bus?

The big problems with this are:

• Will it be treated like a transparent link and not disturb the original functionality?

• How does a system which is split up by radio treat new nodes on the bus?

• What will be the maximum speed and the maximum utilization factor for the split up bus?

• What new suitable protocols can be implemented on a higher level to get the split bus to work?

This is modeled and discussed, real measurement from a radio link is used in the model to see if it’s possible.

The radio communication will satisfy the demands from the company regarding their application. With an efficient error handling and a smart transmission protocol the application can be a very smart way of sending CAN-data via radio.


Denna rapport undersöker möjligheterna med att kommunicera trådlöst i

tidskritiska applikationer med hjälp av radioprotokollet IEEE 802.15.4.

IEEE 802.15.4 är ett väldigt snabbt protokoll så jitter och fördröjningen i sändningarna kan försummas för så små nätverk som tas upp i denna uppsats.

Går det att bryta en CAN-buss och koppla in denna radiolänk så att den

uppfattas som transparent?

Många problem kommer att dyka upp om detta görs, några av dem är dessa:

• Hur behandlar ett system nya noder som kopplas in om CAN-bussen är uppdelad?

• Vilken är den maximala hastigheten och utnyttjandefaktor som kan uppnås av den delade CAN-bussen?

• Måste ett överliggande protokoll användas för att sköta om datatrafiken mellan bussarna?

Detta modelleras och diskuteras efter det att de uppmätta mätvärdena har samlats in och analyserats.

Det som framkom var att det fungerar väldigt bra, data kommer fram i tid och felen i radiosändningarna är väldigt små. Med en väl genomtänkt felhantering och ett likaså genomtänkt omsändningsprotokoll kommer detta att fungera väldigt bra beroende på avstånd och antennval.

APA, Harvard, Vancouver, ISO, and other styles
6

Vaswani, Mohit Suresh. "BLE Controller Module for Wireless Sensor Networks." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc1011776/.

Full text
Abstract:
Sensors have been an integral part of our life since a long time. Traditionally, the transmit information to a data collection center through a physical wire. However, with the introduction of Bluetooth Low Energy (BLE) communication protocol, more research is being done into the field of wireless sensor networks (WSN). BLE was introduced to target low power applications. The CC2650 Launchpad designed by Texas Instruments (TI) can lead to a bulky final product. The aim was to design hardware for the CC2650 micro-controller with the aim of making it more compact for use in WSNs. A top-down approach was used wherein the available product is studied to identify the redundant and reverse engineer it to design a new product. A 2 layer printed circuit board (PCB) was designed which resulted in a 64 percent decrease in size compared to the Launchpad. Also, experiments were performed to test the proof of concept.
APA, Harvard, Vancouver, ISO, and other styles
7

Ye, Qianyun. "2.4-GHz Wireless Network Based Multi-Tag Access System." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188491.

Full text
Abstract:
Machine-to-Machine technology has been intensively researched recently which is believed to take the role of leading ICT industry development. Wireless Sensor Networks provide solution to integrate numerous numbers of machines who require features include low power, low cost, and flexible, which can be fulfilled by applying Zigbee technique. This thesis devotes an effort into Wireless Sensor Network development that a Multi- Tag System operating on 2.4-GHz wireless network is developed. A theoretical study about ZigBee protocol and its bottom layers IEEE 802.15.4 standard is provided to lay a foundation of the design work. The thesis also includes a practical usage of low cost TI CC2530 Systom-on-Chip, together with the illustration of software development inside the chip. The design work provides GUI Platform for users to register themselves into the network and central monitoring platform to track all users within the area. Both GUI platforms are developed based on VB IDE. The Multi-Tag Access System is suitable for attendee control functionality in big-scale conference, events, and lecture, which is also a prototype expecting more functionality to be added in the future.
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Nan. "An IEEE 802.15.4 Packet Error Classification Algorithm : Discriminating Between Multipath Fading and Attenuation and WLAN." Thesis, Mittuniversitetet, Avdelningen för informations- och kommunikationssystem, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-24918.

Full text
Abstract:
In wireless sensor networks, communications are usually destroyed by signal attenuation, multipath fading and different kinds of interferences like WLAN and microwave oven interference. In order to build a stable wireless communication system, reactions like retransmission mechanisms are necessary. Since the way we must react to interference is different from the way we react to multipathfading and attenuation, the retransmission mechanism should be adjusted in different ways under those different cicumstances. Under this condition, channel diagnostics for discriminating the causes that corrupt the packets between multipath fading and attenuation (MFA) and WLAN interference are imperative. This paper presents a frame bit error rate (F-BER) regulated algorithm based on a joint RSSI-LQI classifier that may correctly diagnose the channel status. This discriminator is implemented on MicaZ sensor devices equipped with CC2420 transceivers. This discriminator is able to improve the accuracy to 91%. Although we need to wait for 2 or 3 necessary packets to make a decision, higher stability and reliability are presented when operating this discriminator.
APA, Harvard, Vancouver, ISO, and other styles
9

Delvecchio, Luca. "Progetto ed implementazione di protocolli a basso consumo energetico per reti wireless." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/4879/.

Full text
Abstract:
"I computer del nuovo millennio saranno sempre più invisibili, o meglio embedded, incorporati agli oggetti, ai mobili, anche al nostro corpo. L'intelligenza elettronica sviluppata su silicio diventerà sempre più diffusa e ubiqua. Sarà come un'orchestra di oggetti interattivi, non invasivi e dalla presenza discreta, ovunque". [Mark Weiser, 1991] La visione dell'ubiquitous computing, prevista da Weiser, è ormai molto vicina alla realtà e anticipa una rivoluzione tecnologica nella quale l'elaborazione di dati ha assunto un ruolo sempre più dominante nella nostra vita quotidiana. La rivoluzione porta non solo a vedere l'elaborazione di dati come un'operazione che si può compiere attraverso un computer desktop, legato quindi ad una postazione fissa, ma soprattutto a considerare l'uso della tecnologia come qualcosa di necessario in ogni occasione, in ogni luogo e la diffusione della miniaturizzazione dei dispositivi elettronici e delle tecnologie di comunicazione wireless ha contribuito notevolmente alla realizzazione di questo scenario. La possibilità di avere a disposizione nei luoghi più impensabili sistemi elettronici di piccole dimensioni e autoalimentati ha contribuito allo sviluppo di nuove applicazioni, tra le quali troviamo le WSN (Wireless Sensor Network), ovvero reti formate da dispositivi in grado di monitorare qualsiasi grandezza naturale misurabile e inviare i dati verso sistemi in grado di elaborare e immagazzinare le informazioni raccolte. La novità introdotta dalle reti WSN è rappresentata dalla possibilità di effettuare monitoraggi con continuità delle più diverse grandezze fisiche, il che ha consentito a questa nuova tecnologia l'accesso ad un mercato che prevede una vastità di scenari indefinita. Osservazioni estese sia nello spazio che nel tempo possono essere inoltre utili per poter ricavare informazioni sull'andamento di fenomeni naturali che, se monitorati saltuariamente, non fornirebbero alcuna informazione interessante. Tra i casi d'interesse più rilevanti si possono evidenziare: - segnalazione di emergenze (terremoti, inondazioni) - monitoraggio di parametri difficilmente accessibili all'uomo (frane, ghiacciai) - smart cities (analisi e controllo di illuminazione pubblica, traffico, inquinamento, contatori gas e luce) - monitoraggio di parametri utili al miglioramento di attività produttive (agricoltura intelligente, monitoraggio consumi) - sorveglianza (controllo accessi ad aree riservate, rilevamento della presenza dell'uomo) Il vantaggio rappresentato da un basso consumo energetico, e di conseguenza un tempo di vita della rete elevato, ha come controparte il non elevato range di copertura wireless, valutato nell'ordine delle decine di metri secondo lo standard IEEE 802.15.4. Il monitoraggio di un'area di grandi dimensioni richiede quindi la disposizione di nodi intermedi aventi le funzioni di un router, il cui compito sarà quello di inoltrare i dati ricevuti verso il coordinatore della rete. Il tempo di vita dei nodi intermedi è di notevole importanza perché, in caso di spegnimento, parte delle informazioni raccolte non raggiungerebbero il coordinatore e quindi non verrebbero immagazzinate e analizzate dall'uomo o dai sistemi di controllo. Lo scopo di questa trattazione è la creazione di un protocollo di comunicazione che preveda meccanismi di routing orientati alla ricerca del massimo tempo di vita della rete. Nel capitolo 1 vengono introdotte le WSN descrivendo caratteristiche generali, applicazioni, struttura della rete e architettura hardware richiesta. Nel capitolo 2 viene illustrato l'ambiente di sviluppo del progetto, analizzando le piattaforme hardware, firmware e software sulle quali ci appoggeremo per realizzare il progetto. Verranno descritti anche alcuni strumenti utili per effettuare la programmazione e il debug della rete. Nel capitolo 3 si descrivono i requisiti di progetto e si realizza una mappatura dell'architettura finale. Nel capitolo 4 si sviluppa il protocollo di routing, analizzando i consumi e motivando le scelte progettuali. Nel capitolo 5 vengono presentate le interfacce grafiche utilizzate utili per l'analisi dei dati. Nel capitolo 6 vengono esposti i risultati sperimentali dell'implementazione fissando come obiettivo il massimo lifetime della rete.
APA, Harvard, Vancouver, ISO, and other styles
10

Dewland, Nicola H. "Does an objective laboratory measurement of platelet quality correlate with clinical efficacy?" Thesis, Oxford Brookes University, 2017. https://radar.brookes.ac.uk/radar/items/86b1954b-cc24-4382-8cb7-78418a1b2845/1/.

Full text
Abstract:
Transfusion services have a weak evidence base compared to many other modern healthcare practices. Diversity of platelet concentrate quality and deterioration of function during ageing is poorly understood and difficult to measure. No single test is currently suitable to assess concentrate quality for product development purposes or to confirm suitability of individual concentrates for clinical use. Many of the studies in this field investigate the in vitro association between concentrate age and test results. Not all quality indicators are equally informative because a number of storage associated changes correct upon infusion. This study aims to evaluate novel platelet quality assessment techniques that may be of use in determining platelet concentrate quality. The initial stages of the study involved development of reference methods and in vitro assessment of novel techniques for assessing platelet concentrate quality using out of date concentrates. Reference methods included swirl assessment, pH measurement, hypotonic shock response (HSR) and extent shape change (ESC) assays. Novel techniques investigated included the iZON impedance analyser, the ThromboLUX instrument, rotation thromboelastometry (ROTEM) and an automated, simplified version of the HSR test named the automated water expulsion (AWE) test. After initial technical development of the assays, a study of the test results obtained throughout platelet concentrate ageing in the laboratory and under different storage conditions was undertaken. This was followed by a small, proof of concept clinical trial, in which in vitro test results of platelet concentrate samples obtained from the giving set after platelet transfusion were compared to measures of transfusion outcome in myelodisplasia (MDS) patients. Transfusion efficacy was assessed using self assessment bleeding questionnaires and 1 hour post-transfusion corrected count increment (CCI). Although the number of patients included in the trial was too low to reach any definite conclusions, the ThromboLUX, ROTEM and AWE tests all showed enough potential to warrant further investigation as part of a larger clinical trial in the future.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Cc2640"

1

Yu, Jintao, Liangliang Yu, and Cheng Wang. "Design of Wireless Sensor Network Node Based on CC2430." In Advances in Intelligent Systems and Computing, 619–25. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-15235-2_86.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yang, Yue, and Dewei Kong. "The Construction of Intelligent Classroom System Based on CC2530." In Application of Intelligent Systems in Multi-modal Information Analytics, 501–7. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51556-0_72.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Choi, ShinHyeong. "The Design of CC2420-Based Laboratory Apparatus Monitoring System." In Communications in Computer and Information Science, 289–95. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-26010-0_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zeng, Xiuli, Zheng Yao, and Xuemei Song. "Design of Wireless Monitor System Based on CC2430 and GPRS." In Advanced Technology in Teaching, 857–64. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29458-7_118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Du, Dawei, Longyin Wen, Pengfei Zhu, Heng Fan, Qinghua Hu, Haibin Ling, Mubarak Shah, et al. "VisDrone-CC2020: The Vision Meets Drone Crowd Counting Challenge Results." In Computer Vision – ECCV 2020 Workshops, 675–91. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-66823-5_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Weiya, Gui Hu, Li Gao, and Zhanfeng Lu. "On Image Collection and Transmission System Based on the S3C6410 and CC2430." In Lecture Notes in Electrical Engineering, 785–91. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21747-0_101.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mischie, Septimiu. "Bluetooth Low Energy Applications in MATLAB." In MATLAB [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.95814.

Full text
Abstract:
This chapter presents Bluetooth Low Energy (BLE) applications in MATLAB. Through these applications we acquire measurement data from BLE compatible sensors to PC. The sensors are CC2541 Keyfob and CC2650 Sensor Tag. The first one contains an accelerometer and a temperature sensor while the second one contains more sensors, but inertial sensors and magnetometer are invoked. The PC should be equipped with a general USB BLE adapter. The most important steps for implementing a BLE application are presented: scanning, connecting, configuring and data reading. Following this, more detailed applications are presented: a wireless sensor network for temperature measurement with three Keyfob-based nodes, an application that displays in real time accelerometer data and a heading computed method using either the gyroscope or the magnetometer of CC2650 Sensor Tag. The most important MATLAB elements that are used to implement these applications are different types of variables such as structure, table and object, methods to implement endless loops and real-time display of acquired data and using quaternions to handle 3D orientation of a device.
APA, Harvard, Vancouver, ISO, and other styles
8

Xu, Xiaoxin, Mingguang Wu, Bin Sun, Jianwei Zhang, and Cheng Ding. "The Outdoor Wireless Healthcare Monitoring System for Hospital Patients Based on ZigBee." In Wireless Technologies, 1293–305. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-61350-101-6.ch510.

Full text
Abstract:
Advances in embedded computing systems have resulted in the emergence of Wireless Sensor Networks (WSNs), which provide unique opportunities for sensing physical environments. ZigBee-compliant WSN platforms have been proposed for healthcare monitoring, smart home, industrial monitoring and sensor, and other applications. In this chapter, the authors, using TI CC2430 and CC2431 chipsets with Z-Stack, designed an outdoor patients’ healthcare monitoring system for tracking patients and helping doctors and nurses to keep tabs on patients’ health remotely. Furthermore, several important techniques are elaborated, including reliable communication, localization algorithm, and backup power, which can enhance the system performance. Finally, some suggestions for future development are presented.
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, Ye, Tianze Li, Tao Gao, Yuhan Wang, and JiaHui Chen. "Research on Underground Personnel Positioning Method Based on PSO-GSA Optimization." In Sensor Technology, 1387–439. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-2454-1.ch067.

Full text
Abstract:
In the case of coal mine accidents, in order to ensure timely rescue of the suffering people in a complex environment of underground localization, focusing on Received Signal Strength Indicator (RSSI) in underground personnel positioning accuracy is low and the problem of dynamic tracing parameters changes. Therefore, using an improved gravitational search algorithm (GSA) for the weighted centroid localization that based on RSSI. Utilizing the log distance path loss model gets the distance between the beacon nodes and unknown nodes, and then through the weighted centroid localization algorithm perform the unknown node positioning. Finally, the improved GSA-PSO optimizes the preliminary location results and parameters. Proposed solutions to establish simulation model is verified in MATLAB, and use the on-chip system CC2430 chips experiment platform is established. Experimental results show the proposed method can improve both the positioning accuracy effectively and the adaptive ability of changeful environment.
APA, Harvard, Vancouver, ISO, and other styles
10

Vasim Babu M. "A Novel Power-Monitoring Strategy for Localization in Wireless Sensor Networks Using Antithetic Sampling Method." In Advances in Wireless Technologies and Telecommunication, 52–76. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9004-0.ch004.

Full text
Abstract:
The prime objective of this chapter is to develop a power-mapping localization algorithm based on Monte Carlo method using a discrete antithetic approach called Antithetic Markov Chain Monte Carlo (AMCMC). The chapter is focused on solving two major problems in WSN, thereby increasing the accuracy of the localization algorithm and discrete power control. Consecutively, the work is focused to reduce the computational time, while finding the location of the sensor. The model achieves the power controlling strategy using discrete power levels (CC2420 radio chip) which allocate the power, based on the event of each sensor node. By utilizing this discrete power mapping method, all the high-level parameters are considered for WSN. To improve the overall accuracy, the antithetic sampling is used to reduce the number of unwanted sampling, while identifying the sensor location in each transition state. At the final point, the accuracy is increased to 94% wherein nearly 24% of accuracy is increased compared to other MCL-based localization schemes.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cc2640"

1

Clear, Alison, Allen Parrish, Ming Zhang, and Gerritt C. van der Veer. "CC2020." In SIGCSE '17: The 48th ACM Technical Symposium on Computer Science Education. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3017680.3017690.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lunt, Barry M. "CC2020." In SIGITE '21: The 22nd Annual Conference on Information Technology Education. New York, NY, USA: ACM, 2021. http://dx.doi.org/10.1145/3450329.3476853.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Stefanovic, Radoslav, Alicia Avery, Kanhaiya Bardia, Reza Kabganian, Vasile Oprea, and Trevor Seipp. "User’s Design Specification Preparation for 2¼Cr-1Mo-¼V Reactors in Accordance With ASME Section VIII, Division 2 Code and Code Case 2605." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-97720.

Full text
Abstract:
Today’s hydroprocessing reactor manufacturers use 2¼Cr–1Mo–¼V steel to build lighter reactors than conventional Cr-Mo reactors. Manufacturing even lighter hydroprocessing reactors has been enabled with the introduction of the new ASME Section VIII Division 2 Code, initially released in 2007. The higher allowable stresses in the new Division 2 for these Vanadium-modified steels permits even lighter reactors to be built while maintaining suitable design margins. The new Division 2 Code requires additional engineering to ensure safe design. One of the challenges the engineer is faced with, is preparation of the User’s Design Specification (UDS) including new and more stringent requirements for fatigue evaluation. As the operating temperature of the rector is higher than 371°C, engineers have to evaluate the fatigue life of the reactor in accordance with Code Case 2605 (CC2605). CC2605 requires inelastic analysis and evaluation effects of creep. Vanadium-modified reactors require additional care during fabrication to prevent higher hardness around weld areas, reheat cracking, and reduced toughness at lower temperatures in the “as welded” condition. This paper provide guidance for the preparation of an ASME Section VIII Division 2 User’s Design Specification including process descriptions of all the cycles expected for the life of the rector and analysis requested by CC2605. An example of such an analysis, including finite element analysis results, is provided in this paper. Requirements to provide the material specification is also discussed with an emphasis on prevention of reheat cracking, hardenability, and temper and hydrogen embitterment.
APA, Harvard, Vancouver, ISO, and other styles
4

Clear, Alison, Shingo Takada, and Ernesto Cuadros Vargas. "CC2020 -- Visualization Tool Preview and Review." In SIGCSE '20: The 51st ACM Technical Symposium on Computer Science Education. New York, NY, USA: ACM, 2020. http://dx.doi.org/10.1145/3328778.3366998.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Clear, Alison, John Impagliazzo, and Ming Zhang. "Computing Competencies and the CC2020 Project." In SIGCSE '19: The 50th ACM Technical Symposium on Computer Science Education. New York, NY, USA: ACM, 2019. http://dx.doi.org/10.1145/3287324.3293724.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Impagliazzo, John, Allen Parrish, and Alison Clear. "Innovative Computing Curricula and the CC2020 Project." In 2018 IEEE Frontiers in Education Conference (FIE). IEEE, 2018. http://dx.doi.org/10.1109/fie.2018.8658622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhao, Shaojun, Meiqin Liu, Zhen Fan, and Senlin Zhang. "Warehousing environment monitoring systems based on CC2530." In 2014 33rd Chinese Control Conference (CCC). IEEE, 2014. http://dx.doi.org/10.1109/chicc.2014.6896648.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhen-Xing Shi, Xiu-Juan Fan, and Zhao Jing. "Intelligent Environmental Monitoring System Design Based on CC2530." In 2013 Fifth International Conference on Measuring Technology and Mechatronics Automation (ICMTMA 2013). IEEE, 2013. http://dx.doi.org/10.1109/icmtma.2013.162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Qu, Tiezhu, Xiaorong Chen, Lei Zhang, Chunlei Xia, and Shuguang Dai. "ZigBee Wirelessly Network Module Design Based on CC2480." In 2010 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA 2010). IEEE, 2010. http://dx.doi.org/10.1109/icmtma.2010.324.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

ZhanG, Xu-hui, Pan Duan, ZhiXuan Peng, and Li Na. "Design of Home Automation Network based on CC2530." In 2013 8th International Forum on Strategic Technology (IFOST). IEEE, 2013. http://dx.doi.org/10.1109/ifost.2013.6616866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cc2640' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography