Relevant bibliographies by topics / Centrifugal heater

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Centrifugal heater'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Centrifugal heater.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Centrifugal heater"

1

Пинягин, Дмитрий Сергеевич, Наталия Михайловна Труфанова та Никита Александрович Костарев. "Исследование процессов тепломассопереноса в нефтяной скважине с~призабойным нагревателем различной длины". Computational Continuum Mechanics 17, № 2 (2024): 143–50. http://dx.doi.org/10.7242/1999-6691/2024.17.2.13.

Full text
Abstract:
This paper considers a three-dimensional mathematical model of heat and mass transfer in an oil well with a bottom-hole heater. The vertical section of an oil well with an electric bottom-hole heater device for wells with highly viscous and paraffinic oil was investigated. The bottomhole heater is a monolithic cylinder located in the lower part of the tubing. The tubing contains perforations through which the oil fluid enters the tubing. The use of a local heater in the near-wellbore area makes it possible to increase the temperature of the fluid flowing through it, thereby reducing the viscos
APA, Harvard, Vancouver, ISO, and other styles
2

Kammuang-Lue, Niti, Deuansavanh Phommavongsa, Kritsada On-Ai, Phrut Sakulchangsatjatai, and Pradit Terdtoon. "Thermal Resistance of a Rotating Closed-Loop Pulsating Heat Pipe: Effect of Centrifugal Accelerations." Applied Mechanics and Materials 851 (August 2016): 292–98. http://dx.doi.org/10.4028/www.scientific.net/amm.851.292.

Full text
Abstract:
Objective of this study is to experimentally investigate the effect of centrifugal accelerations on thermal resistance of the rotating closed-loop pulsating heat pipe (RCLPHP). The RCLPHPs were made of a copper tube with internal diameter of 1.50 and 1.78 mm and bent into flower’s petal-shape and arranged into a circle with 11 turns. The evaporator section located at the outer end of the bundle while the condenser section placed around the center of the RCLPHP with no adiabatic section. Both sections had an identical length of 50 mm. R123, and ethanol was filled as working fluid respectively.
APA, Harvard, Vancouver, ISO, and other styles
3

Sailani, Sunaina. "TO STUDY AND ANALYSIS OF FLAT PLATE SOLAR WATER HEATER PV CELLS." International Journal of Engineering Technologies and Management Research 5, no. 3 (2020): 159–65. http://dx.doi.org/10.29121/ijetmr.v5.i3.2018.188.

Full text
Abstract:
In this study we are obtaining the maximum temperature of solar water heater using of PV cells. The flat plate solar water heater are consisting using several parts such as collector , flat plate glass , circulating pump, PV cells , frame . The centrifugal pump is operated by PV Cells. Water temperature is measured by digital temperature meter. Hot water is storage in container. The most elements of these are a clear front cover, collector housing associated an absorbent material.
APA, Harvard, Vancouver, ISO, and other styles
4

Sunaina, Sailani. "TO STUDY AND ANALYSIS OF FLAT PLATE SOLAR WATER HEATER PV CELLS." International Journal of Engineering Technologies and Management Research 5, no. 3 (2018): 159–65. https://doi.org/10.5281/zenodo.1216875.

Full text
Abstract:
<strong><em>In this study we are obtaining the maximum temperature of solar water heater using of PV cells. The flat plate solar water heater are consisting using several parts such as collector , flat plate glass , circulating pump, PV cells , frame . The centrifugal pump is operated by PV Cells. Water temperature is measured by digital temperature meter. Hot water is storage in container. The most elements of these are a clear front cover, collector housing associated an absorbent material</em>.</strong>
APA, Harvard, Vancouver, ISO, and other styles
5

Worapong Boonchouytan, Nantapong Pongpiriyadecha, and Nutjired Kheowsakul. "Development and Improvement of a Vacuum Fryer and a Centrifugal Deoiling Machine for Deep-Fried Split-Gill Mushroom Production." Advances in Technology Innovation 10, no. 2 (2025): 132–42. https://doi.org/10.46604/aiti.2024.13935.

Full text
Abstract:
This study aims to develop a vacuum fryer and a centrifugal deoiling machine for producing deep-fried split-gill mushrooms. The vacuum fryer prototype includes a fryer, oil heater, vacuum pump, and control system, while the deoiling machine features a steel frame, external barrel, centrifugal barrel, and transmission unit. Tests are conducted by frying split-gill mushrooms at 60, 80, and 100 ℃ for 5, 10, and 15 minutes. The deoiling machine removes oil at three rotational speeds (100, 300, and 500 rpm) and deoiling times (1, 3, and 5 minutes). Results show that the ideal frying condition is 80
APA, Harvard, Vancouver, ISO, and other styles
6

Sailani, Sunaina. "TO STUDY AND ANALYSIS OF SOLAR WATER HEATER USING VARIOUS MASS FLOW RATE." International Journal of Engineering Technologies and Management Research 5, no. 3 (2020): 139–44. http://dx.doi.org/10.29121/ijetmr.v5.i3.2018.185.

Full text
Abstract:
Solar water heater is a device which is used for heating the water using of sun energy. This system is connected like as storage tank, centrifugal pump, pipes and glass. The circulating flexible water pipes are connected with the metallic pipe, which are assembled with the body. The solar radiation are achieving from sun and passing although glass and collector for the purpose of the heating the circulating water. In this way we are achieving the various temperatures using of circulating pump.
APA, Harvard, Vancouver, ISO, and other styles
7

Sunaina, Sailani. "TO STUDY AND ANALYSIS OF SOLAR WATER HEATER USING VARIOUS MASS FLOW RATE." International Journal of Engineering Technologies and Management Research 5, no. 3 (2018): 139–44. https://doi.org/10.5281/zenodo.1216839.

Full text
Abstract:
<strong><em>Solar water heater is a device which is used for heating the water using of sun energy. This system is connected like as storage tank, centrifugal pump, pipes and glass. The circulating flexible water pipes are connected with the metallic pipe, which are assembled with the body. The solar radiation are achieving from sun and passing although glass and collector for the purpose of the heating the circulating water. In this way we are achieving the various temperatures using of circulating pump</em>.</strong>
APA, Harvard, Vancouver, ISO, and other styles
8

Putro, Sartono. "Application of The Rotary Dryer Machine in The Semi Modern Herbal Herbs Business Group in Nguter District, Sukoharjo Regency." Urecol Journal. Part E: Engineering 1, no. 2 (2021): 64–72. http://dx.doi.org/10.53017/uje.83.

Full text
Abstract:
The purpose of this community service program is to apply the rotary dryer unit to the production of herbal herbs that do not require solar heat. Target on the management aspect, partners are able to manage business with standard business management. Partners have an entrepreneurial spirit and have a strong spirit. Activities are carried out with coordination and discussion with partners. A meeting to determine the capacity of the rotary dryer unit and the needs of electrical energy and heat sources. Whereas for the herbal medicine business entrepreneur group, coordination was carried out to d
APA, Harvard, Vancouver, ISO, and other styles
9

Hur, Deog-Jae, Seong-Il Song, and Hyun-Ju Lee. "Energy Consumption Characteristics for Design Parameters of Permanent Magnet-Based Al Billet Heater." Applied Sciences 12, no. 6 (2022): 3052. http://dx.doi.org/10.3390/app12063052.

Full text
Abstract:
This study analyzed design factors to maximize energy efficiency, via numerical analysis, through an examination of the characteristics of a heating system that uses permanent magnets and is employed for preheating in the aluminum cladding extrusion process. The design parameters of the billet heater using permanent magnets are the magnetic flux direction, the number of magnets, clearance, and eccentricity. The magnetic flux density, current density, power loss, temperature, and energy consumption characteristics were examined using the results of the parameter variations. Numerical analysis f
APA, Harvard, Vancouver, ISO, and other styles
10

Harada, Yasunori, Yuji Miura, and Katsuhiko Takahashi. "Formation of Fe-Al Intermetallic Compound Film on Carbon Steel by Shot Peening and Heat Treatment." Advanced Materials Research 409 (November 2011): 802–7. http://dx.doi.org/10.4028/www.scientific.net/amr.409.802.

Full text
Abstract:
The formation of an Fe-Al intermetallic compound film on carbon steel by shot lining and heat treatment was investigated. In the experiment, a centrifugal-type peening machine with an electrical heater was employed. The shot medium was high-carbon cast steel. The substrate was a commercial carbon steel, and the sheet was commercially available pure aluminum. The shot lining process of carbon steel with an aluminum sheet was carried out at 300 °C in air using a peening machine. Heat treatment was performed at diffusion temperatures from 600 to 1050 °C in vacuum. The lined substrates exhibited a
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Centrifugal heater"

1

Мартиненко, В. А., Д. С. Москаленко та А. И. Сидорец. "Совершенствование конструкции антипомпажного клапана центробежного нагнетателя ГПА для его эффективной антипомпажной защиты". Thesis, Издательство СумГУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/8059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Meyer, Antoine. "Active control of heat transfer by an electric field." Thesis, Normandie, 2017. http://www.theses.fr/2017NORMLH13/document.

Full text
Abstract:
La stabilité d’un fluide Newtonien diélectrique confiné dans un anneau cylindrique et soumis à un gradient radial de température et à un champ électrique est étudiée. Le gradient de température induit une stratification de la permittivité électrique du fluide et de sa masse volumique. Trois poussées thermiques rentrent alors en jeu : la gravité terrestre créée la poussée d’Archimède, la rotation des cylindres engendre la poussée centrifuge, et le champ électrique induit la poussée diélectrophorétique. L’effet de ces poussées est étudié dans différentes combinaisons, principalement à travers l’
APA, Harvard, Vancouver, ISO, and other styles
3

Montanez, Morantes Maria Vanessa. "Operational optimisation of low-temperature energy systems." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/operational-optimisation-of-lowtemperature-energy-systems(a22bd339-1473-4401-bbc5-2e1280e57756).html.

Full text
Abstract:
Low-temperature energy systems are processes that operate below ambient temperatures and make use of refrigeration cycles, where the main energy consumption is due to the shaft work required to drive the compressors. Very-low-temperature energy systems, also known as cryogenic processes, operate at around -150°C and below. Due to increasing demand of products from cryogenic processes and tighter environmental regulations, existing plants need to be revamped to increase their energy efficiency or adapt to new processing capacities. So, accurate models of the performance of cryogenic processes a
APA, Harvard, Vancouver, ISO, and other styles
4

Johansson, Wilhelm. "Modeling of Wet Scrubber with Heat Recovery in Biomass Combustion Plants." Thesis, Linnéuniversitetet, Institutionen för byggd miljö och energiteknik (BET), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-95585.

Full text
Abstract:
During combustion of biomass, particulate matter is emitted, which has severe health impacts on humans. The company ITK Envifront has developed a scrubber technology that cleans the flue gas while also recovering the flue gas energy, increasing the efficiency of the combustion plant. In this thesis, a simulation model was built in MATLAB according to the Finite Element Method. Validation of the model against 3 different facilities showed reasonable accuracy with a tendency to overestimate the scrubber heat recovery and a mean prediction deviation of approximately 7 %. The model was then used t
APA, Harvard, Vancouver, ISO, and other styles
5

Sleiti, Ahmad Khalaf. "EFFECT OF CORIOLIS AND CENTRIFUGAL FORCES ON TURBULENCE AND TRANSPORT AT HIGH ROTATION AND BUOYANCY NUMBERS." Doctoral diss., University of Central Florida, 2004. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4408.

Full text
Abstract:
This study attempts to understand one of the most fundamental and challenging problems in fluid flow and heat transfer for rotating machines. The study focuses on gas turbines and electric generators for high temperature and high energy density applications, respectively, both which employ rotating cooling channels so that materials do not fail under high temperature and high stress environment. Prediction of fluid flow and heat transfer inside internal cooling channels that rotate at high rotation number and high density ratio similar to those that are existing in turbine blades and generator
APA, Harvard, Vancouver, ISO, and other styles
6

Viswanathan, Aroon Kumar. "Detached Eddy Simulation of Turbulent Flow and Heat Transfer in Turbine Blade Internal Cooling Ducts." Diss., Virginia Tech, 2006. http://hdl.handle.net/10919/28518.

Full text
Abstract:
Detached Eddy Simulations (DES) is a hybrid URANS-LES technique that was proposed to obtain computationally feasible solutions of high Reynolds number flows undergoing massive separation with reliable accuracy. Since its inception, DES has been applied to a wide variety of flow fields, but mostly limited to unbounded external aerodynamic flows. This is the first study to apply and validate DES to predict the internal flow and heat transfer in non-canonical flows of industrial relevance. The prediction capabilities of DES in capturing the effects of Coriolis forces, which are induced by rotatio
APA, Harvard, Vancouver, ISO, and other styles
7

Poorooshasb, Farrokh. "Centrifuge modelling of the dynamic embedment of a heat emitting projectile in normally consolidated clay." Thesis, University of Cambridge, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.254435.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sewall, Evan Andrew. "Large Eddy Simulations of Flow and Heat Transfer in the Developing and 180° Bend Regions of Ribbed Gas Turbine Blade Internal Cooling Ducts with Rotation - Effect of Coriolis and Centrifugal Buoyancy Forces." Diss., Virginia Tech, 2005. http://hdl.handle.net/10919/29858.

Full text
Abstract:
Increasing the turbine inlet temperature of gas turbine engines significantly increases their power output and efficiency, but it also increases the likelihood of thermal failure. Internal passages with tiny ribs are typically cast into turbine blades to cool them, and the ability to accurately predict the flow and heat transfer within these channels leads to higher design reliability and prevention of blade failure resulting from local thermal loading. Prediction of the flow through these channels is challenging, however, because the flow is highly turbulent and anisotropic, and the presenc
APA, Harvard, Vancouver, ISO, and other styles
9

Dowd, Cody Stewart. "A Study of Centrifugal Buoyancy and Particulate Deposition in a Two Pass Ribbed Duct for the Internal Cooling Passages of a Turbine Blade." Thesis, Virginia Tech, 2016. http://hdl.handle.net/10919/81181.

Full text
Abstract:
In this thesis, the ribbed ducts of the internal cooling passage in turbine blading are investigated to demonstrate the effects of high speed rotation. Rotation coupled with high temperature operating conditions alters the mean flow, turbulence, and heat transfer augmentation due to Coriolis and centrifugal buoyancy forces that arises from density stratification in the domain. Gas turbine engines operate in particle laden environments (sand, volcanic ash), and particulate matter ingested by the engine can make their way into the blade internal cooling passages over thousands of operating hours
APA, Harvard, Vancouver, ISO, and other styles
10

Björk, Johan. "Compressor CFD simulation method development : A CFD study." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69880.

Full text
Abstract:
This master thesis project consisted of three parts that all were performed through CFD simulations with the purpose to develop Scania's methods in the subject of CFD. All parts included simulations on Scania's SC92T70 centrifugal compressor. Part one consisted of performing a mesh study for the purpose of reliability, to investigate the convergence of different parameters by refining the boundary layer. The method used is an inflation option called First layer thickness. Five different meshes were generated where the Richardson extrapolation method was used to examine the parameters between t
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Centrifugal heater"

1

Shevchuk, Igor V. Modelling of Convective Heat and Mass Transfer in Rotating Flows. Springer, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shevchuk, Igor V. Modelling of Convective Heat and Mass Transfer in Rotating Flows. Springer International Publishing AG, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Shevchuk, Igor V. Convective Heat and Mass Transfer in Rotating Disk Systems. Springer London, Limited, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shevchuk, Igor V. Convective Heat and Mass Transfer in Rotating Disk Systems. Springer, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shevchuk, Igor V. Convective Heat and Mass Transfer in Rotating Disk Systems. Springer, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

The 2006-2011 World Outlook for Steam and Hot Water Heating Element, Centrifugal Fan-Type Blower, and Propeller Fan-Type Unit Heaters Excluding Electric. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Parker, Philip M. The 2007-2012 World Outlook for Steam and Hot Water Heating Element, Centrifugal Fan-Type Blower, and Propeller Fan-Type Unit Heaters Excluding Electric. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Parker, Philip M. The 2007-2012 Outlook for Steam and Hot Water Heating Element, Centrifugal Fan-Type Blower, and Propeller Fan-Type Unit Heaters Excluding Electric in Japan. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Parker, Philip M. The 2007-2012 Outlook for Steam and Hot Water Heating Element, Centrifugal Fan-Type Blower, and Propeller Fan-Type Unit Heaters Excluding Electric in India. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Parker, Philip M. The 2007-2012 Outlook for Steam and Hot Water Heating Element, Centrifugal Fan-Type Blower, and Propeller Fan-Type Unit Heaters Excluding Electric in Greater China. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Centrifugal heater"

1

Sabaliauskaite, G., S. E. Stallebrass, A. M. McNamara, R. N. Taylor, S. Divall, and J. P. Panchal. "Centrifuge modelling of hollow heated piles in saturated sand." In Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society. CRC Press, 2024. http://dx.doi.org/10.1201/9781003431749-648.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vadasz, Peter. "Natural Convection Due to Thermal Buoyancy of Centrifugal Body Forces." In Fluid Flow and Heat Transfer in Rotating Porous Media. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-20056-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yuan, Leqi, Kun Cheng, Haozhi Bian, Yaping Liao, and Chenxi Jiang. "Numerical Simulation of Flow Boiling Heat Transfer in Helical Tubes Under Marine Conditions." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_86.

Full text
Abstract:
AbstractLead-based cooled reactors in most countries and some small reactors at sea use helical tube steam generators. Compared with U-tubes, the convection heat transfer coefficient in the spiral tube is higher, the structure is more compact, and the secondary flow is generated under the action of centrifugal force and gravity, which can achieve the effect of wetting the inner wall of the tube. However, due to the importance of the steam generator in the reactor and the complexity of the flow and boiling in the helical tube, the aggregation behavior of bubbles, the distribution of the two-pha
APA, Harvard, Vancouver, ISO, and other styles
4

Stanchina, Gabriella. "Conclusions: Facets of Self across Cultures." In The Art of Becoming Infinite. Open Book Publishers, 2025. https://doi.org/10.11647/obp.0442.06.

Full text
Abstract:
In the concluding chapter, I address in a systematic way the challenge posed to us by the contraposition between a vertical and a horizontal self. The key argument raised by Mou Zongsan, i.e., that it is Confucianism that opens the door to the subjective universe, may seem controversial. Indeed, since its foundation, Western thought seems to have revolved precisely around the subjective dimension. It is therefore necessary to analyze the three main characteristics of self—interiority, solitude, and reflection—and to see how these characteristics present themselves in Western epistemologically-
APA, Harvard, Vancouver, ISO, and other styles
5

Lock, G. S. H. "The Rotating, Tubular Thermosyphon." In The Tubular Thermosyphon. Oxford University PressOxford, 1992. http://dx.doi.org/10.1093/oso/9780198562474.003.0004.

Full text
Abstract:
Abstract At first glance, it may seem that the replacement of gravitational acceleration by centrifugal acceleration is a minor change, and indeed it is often assumed that heat and mass transfer relations in a rotating field may be obtained from those in a uniform gravitational field by this simple substitution. As first-order approximations, the results are often useful but they cannot be expected to reflect with great accuracy the consequences of spatially varying centrifugal and Coriolis accelerations. In particular, it is often found that the Coriolis effect in a rotating thermosyphon play
APA, Harvard, Vancouver, ISO, and other styles
6

Šarevski, Milan N., and Vasko N. Šarevski. "Water (R718) Centrifugal Compressors." In Water (R718) Turbo Compressor and Ejector Refrigeration / Heat Pump Technology. Elsevier, 2016. http://dx.doi.org/10.1016/b978-0-08-100733-4.00002-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wood, Funlayo E. "Wholeness by Every Means." In The Oxford Handbook of Caribbean Religions. Oxford University Press, 2024. http://dx.doi.org/10.1093/oxfordhb/9780190916961.013.25.

Full text
Abstract:
Abstract This chapter discusses the practice of religiomedical healing in the Caribbean. It highlights how healing is a centrifugal force in Caribbean religious practice. In the Caribbean, people of all kinds, regardless of affiliation or status, may employ spiritual healers or religiomedical healing modalities at some point in their lives, especially for African and Indian descendants whose healthcare was largely ignored, as they were considered expendable and replaceable labor. The chapter then provides an overview of case studies of the most prominent religiomedical healing traditions and m
APA, Harvard, Vancouver, ISO, and other styles
8

Lawless, Patrick B., Kuk Kim Frey, and Sanford Fleeter. "Rotating Stall Spatial Domain Characterization in Axial and Centrifugal Compressors." In Turbomachinery Fluid Dynamics and Heat Transfer. Routledge, 2017. http://dx.doi.org/10.1201/9780203734919-18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ellis, Katharine. "Opera against the Odds." In French Musical Life. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780197600160.003.0006.

Full text
Abstract:
Until 1864, provincial opera operated within a Napoleonic system designed to ensure hierarchically ordered provision for large and smaller towns nationwide and in the colonies. Discussion of how the system worked, how it was funded, how it served indirectly to erase regional difference, and how raw material from Paris (Grand Opera and the voice types it required) became too expensive, helps explain why the system was already at a breaking point by the 1830s, catalyzing heated local and local–national debates. The significance of provincial opera’s travails, its competitors in the entertainment
APA, Harvard, Vancouver, ISO, and other styles
10

Eralp, O. C., and S. Oruc. "APPLICATION OF SPECTRAL ANALYSIS TECHNIQUES TO CAVITATION IN CENTRIFUGAL PUMPS." In Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1993. Elsevier, 1993. http://dx.doi.org/10.1016/b978-0-444-81619-1.50048-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Centrifugal heater"

1

Muralidharan, G., Y. Yamamoto, M. P. Brady, B. A. Pint, D. Voke, and R. I. Pankiw. "Development of Cast Alumina-forming Austenitic Stainless Steel Alloys for Use in High Temperature Process Environments." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-06114.

Full text
Abstract:
Abstract There is significant interest in the development of alumina forming, creep resistant alloys for use in various industrial process environments. It is expected that these alloys can be fabricated into components for use in these environments through centrifugal casting and welding. Based on the successful earlier studies on the development of wrought versions of Alumina Forming Austenitic (AFA) alloys, new alloy compositions have been developed for cast products. These alloys achieve good high-temperature oxidation resistance due to the formation of protective Al2O3 scales while multip
APA, Harvard, Vancouver, ISO, and other styles
2

Venkataraman, S., P. Karduck, G. W. Overbeck, and D. Jakobi. "Centrifugally Cast 25% Cr Superduplex Steel for Solid CRA Line Pipe." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05811.

Full text
Abstract:
Abstract Duplex stainless steel alloys are widely used by the upstream oil and gas industry for line pipe applications as per API(1) 5LC and DNV(2) OS F 101 standards. Among the various duplex grades available the superduplex grades are gaining wider acceptance because of increased strength and corrosion resistance. Line pipes are conventionally made of seamless or longitudinally welded pipes supplied in the wrought form. An alternative process for the manufacture of a seamless pipe is the centrifugal casting process. The development of centrifugally cast 25% Cr superduplex line pipe of 25 mm
APA, Harvard, Vancouver, ISO, and other styles
3

McElhinney, S. A., and T. M. Jahns. "Opportunities for Improved Cooling of AC Machine Rotors using Centrifugal Heat Pipes." In 2024 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2024. https://doi.org/10.1109/ecce55643.2024.10860888.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Naudet, Joshua, Spencer Christian, and Calvin Chandler. "Simulating Flow and Heat Transfer Properties of Centrifugal Nuclear Thermal Propulsion Reactor." In Nuclear and Emerging Technologies for Space (NETS 2025). American Nuclear Society, 2025. https://doi.org/10.13182/xyz-47363.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nassersharif, Bahram, Joel Aubin, Nicholas Caito, Nicholas Colavecchio, and Nicholas DeFranzo. "Hydrogen Flow and Heat Transfer Enhancements for the Centrifugal Nuclear Thermal Rocket." In Nuclear and Emerging Technologies for Space (NETS 2025). American Nuclear Society, 2025. https://doi.org/10.13182/xyz-47419.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yoshitake, A., M. Teraoka, T. Torigoe, and S. Amako. "The Application & Field Experience of High Strength 12% Cr Centrifugally Cast Pipe for Gas Gathering System." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95086.

Full text
Abstract:
Abstract Centrifugal cast method is one of the processes to provide high quality seamless pipe The advantages of the process are heavy wall pipe can be manufacturedrelatively flexible in material selection for manufacturing pipe For sweet corrosion environment caused by CO2 (1)(2) where carbon steels can not be used centrifugally cast 12% Cr martensitic stainless steel pipes and fittings have been developed One of the key factors of this material applied to pipeline is the weldability, especially high hardness of the welds or its heat affected zone which causes for brittle rupture as well as s
APA, Harvard, Vancouver, ISO, and other styles
7

Frate, Guido Francesco, Matteo Benvenuti, Francesco Chini, and Lorenzo Ferrari. "OPTIMAL DESIGN OF CENTRIFUGAL COMPRESSORS IN SMALL-SIZE HIGH-TEMPERATURE BRAYTON HEAT PUMPS." In 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2024). ECOS 2024, 2024. http://dx.doi.org/10.52202/077185-0031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Venkataraman, S., G. W. Overbeck, and D. Jakobi. "Development of Centrifugally Cast 22% Cr Duplex Steel for Line Pipe." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4107.

Full text
Abstract:
Abstract Conventionally solid corrosion resistant seamless pipes are made by hot forming process. This is subsequently followed by final finishing in terms of heat treatment and non-destructive inspection. An alternative process for the manufacture of seamless pipes is the horizontal spun casting process. In this process the mould is spinning during solidification. Centrifugal forces result in the formation of a dense casting. This process allows pipes to be manufactured on a customized basis like diameter, wall thickness and alloy composition. In terms of usage of solid corrosion resistant al
APA, Harvard, Vancouver, ISO, and other styles
9

Hendrix, David E. "Comparative Performance of Six Cast Tube Alloys in an Ethylene Pyrolysis Test Heater." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98430.

Full text
Abstract:
Abstract This paper discusses a test program to in-situ evaluate the comparative performance of six centrifugally cast heater tube alloys in an ethylene pyrolysis heater. The unusually high creep growth of conventional HP-40 radiant tubes leading to development of the test program is described, as well as the performance of the test tubes, as measured by post exposure creep growth, carburization behavior, microstructural analysis and time to failure. The performance of an aluminized tube in a separate pyrolysis heater is also described.
APA, Harvard, Vancouver, ISO, and other styles
10

Krakower, Joel, Nicholson Dunavan, Dominyck Darlington, Kylie Braunhardt, Ines Villarreal, and Zach Smith. "Design and Testing of a Heat Transfer Experiment for a Centrifugal Nuclear Thermal Rocket." In Nuclear and Emerging Technologies for Space (NETS 2024). American Nuclear Society, 2024. http://dx.doi.org/10.13182/nets24-43986.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Centrifugal heater"

1

Morgan. L51992 Centrifuge Modeling of Frost Heave of Chilled Buried Pipelines. Pipeline Research Council International, Inc. (PRCI), 2005. http://dx.doi.org/10.55274/r0010951.

Full text
Abstract:
This project considers some of the geotechnical and geothermal engineering issues that will need to be considered for the design and construction of large diameter gas transmission pipelines from the arctic production areas to southern markets. The challenges relate to determination of the frost heave and thaw settlement behaviour of a pipeline as it crosses from areas of continuous permafrost, through discontinuous zones to completely unfrozen ground conditions. The use of chilled gas will overcome some problems in already frozen ground but will cause frost heave where a frost bulb is formed
APA, Harvard, Vancouver, ISO, and other styles
2

Poerner. PR-015-11211-R01 Mechanical Seal Auxiliary Systems Guideline. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010789.

Full text
Abstract:
The reliance on centrifugal pumps the world over implies a heavy reliance on mechanical seals. In order to get the highest level of performance from the seals, auxiliary systems are used either to condition the seal operating environment or monitor the systems and detect failures. Current standards already exist that recommend seal auxiliary systems based on certain pump operating conditions, and are widely accepted in the industry both among seal end-users and vendors. And because of their knowledge on the actual seals, the vendors are the primary source for end-users to receive designs and e
APA, Harvard, Vancouver, ISO, and other styles
3

Review of centrifuge testing applicability to frost heave. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2005. http://dx.doi.org/10.4095/220958.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Centrifugal heater' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography