Log in

Relevant bibliographies by topics / Centrifugal spray devices

Contents

Journal articles
Dissertations / Theses

Academic literature on the topic 'Centrifugal spray devices'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Centrifugal spray devices.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Centrifugal spray devices"

1

Salikhova, M. N., V. A. Aleksandrov, I. P. Galchak, A. D. Kolga, and V. S. Kukhar. "Factors affecting the highly dispersed spray when applying fertilizers." IOP Conference Series: Earth and Environmental Science 1206, no. 1 (2023): 012041. http://dx.doi.org/10.1088/1755-1315/1206/1/012041.

Full text

Abstract:

Abstract The article is devoted to devices for subsurface fertilization in the form of drip-air mixtures. A comparative analysis of spray mixers with centrifugal and jet nozzles has been carried out. The article presents the results of a study on the spray dependence on the ratio of air and liquid pressure with increasing fluid flow and steady air flow. It has been established that a spray mixer with a centrifugal nozzle gives a thinner spray cone is better in its operational qualities and will more fully meet the requirements for devices for intra-soil application of liquid fertilizers. In ad

APA, Harvard, Vancouver, ISO, and other styles

2

Vambol, S., N. A. Khan, A. H. Khan, et al. "Developed jet-centrifugal spray devices: experimental testing to establish the possibility of their application in plants spraying technologies." Journal of Achievements in Materials and Manufacturing Engineering 1, no. 102 (2020): 30–41. http://dx.doi.org/10.5604/01.3001.0014.6326.

Full text

Abstract:

Purpose: Experimentally substantiate the possibility of using the developed jet-centrifugal spraying device in plants spraying technologies. Design/methodology/approach: Many years of experience in creating spraying devices for solving practical problems in various industries made it possible to propose a design diagram of a single-phase jet-centrifugal spraying device. The tests were aimed at achieving device characteristics that are acceptable for use in plants spraying technologies such as jet coverage distance, droplet size and droplet deposition area (spray diameter). For this a several t

APA, Harvard, Vancouver, ISO, and other styles

3

Tashybayeva, M. M., А. K. Kakimov, A. B. Bakiyeva, G. A. Zhumadilova, and A. M. Muratbayev. "An installation for producing capsules by spraying." Journal of Almaty Technological University 148, no. 2 (2025): 89–98. https://doi.org/10.48184/2304-568x-2025-2-89-98.

Full text

Abstract:

A gear pump and a centrifugal spray nozzle were used in the encapsulation unit. 0.8% and 1% sodium alginate were obtained for the encapsulated material. The capsules obtained in a concentration of 1% sodium alginate during the experiment were rounded and homogeneous, soft but stable under physical influence, and had an average diameter of 1,2×10-3м. To get one kilogram of mk capsules, it is necessary to take Vz=1,404·10-3 м3 from the volume filled with capsules. This corresponds to the set productivity per hour. Turbulent motion is characterized by continuous mixing of liquid particles. Basica

APA, Harvard, Vancouver, ISO, and other styles

4

Nazim Ibrahimov, Khadija Heydarli, Nazim Ibrahimov, Khadija Heydarli. "DEVELOPMENT OF RECOVERY TECHNOLOGY OF CENTRIFUGAL PUMP IMPELLER IN PLASMA SPRAY DEVICE." PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions 43, no. 08-01 (2024): 566–71. http://dx.doi.org/10.36962/pahtei4308012024-63.

Full text

Abstract:

Modern oil field pumps are widely used in drilling and operation of wells. Most of the pumps used in drilling oil wells are centrifugal pumps. Centrifugal pumps fail for many reasons after a long period of operation. One of the most important parts of these pumps is the impeller. Impeller failures lead to stoppages in centrifugal pumps. In order to prevent stoppages, it is necessary to increase longevity and extend the time between repairs, eliminate malfunctions in the impeller. The main causes of failure are vibration and cavitation, corrosion and wear in the pump. The article concerns the p

APA, Harvard, Vancouver, ISO, and other styles

5

Batalov, B. G., and R. A. Stepanov. "Mathematical modeling of the droplet flow of a spraying device." ВЕСТНИК ПЕРМСКОГО УНИВЕРСИТЕТА. ФИЗИКА, no. 4 (2023): 69–74. http://dx.doi.org/10.17072/1994-3598-2023-4-69-74.

Full text

Abstract:

The paper presents the results of mathematical modeling, numerical and laboratory experiments aimed at developing an optical method for estimating the size distribution of droplets in a spray. The optical method is based on analyzing the brightness of light reflected by drops of a liquid. The ob-ject of study was a spray of a transparent liquid (distilled water) produced by a centrifugal axisym-metric nozzle. It is known that the intensity (brightness) of light reflected by a drop is proportional to the surface area of the drop, and for spherical drops, accordingly, to the square of the drop’s

APA, Harvard, Vancouver, ISO, and other styles

6

Yakupov, A., R. Aкhunov, A. Subhangulov, and V. Bajburin. "JUSTIFICATION OF THE DESIGN OF AN EXPERIMENTAL DEVICE FOR PRE-SOWING PREPARATION OF SEED MATERIAL." RUSSIAN ELECTRONIC SCIENTIFIC JOURNAL 37, no. 3 (2020): 46–55. http://dx.doi.org/10.31563/2308-9644-2020-37-3-46-55.

Full text

Abstract:

An experimental etcher – inlayer of potato tubers is proposed, containing a chamber for coating tubers with a liquid preparation, with a sieve and a centrifugal spray installed in it, and a chamber for coating with a powdered preparation. A model that is as close as possible to the real process is constructed and justified, a visualization of the process is obtained on its basis, and optimal operating modes are established. Conclusions are given based on the research results.

APA, Harvard, Vancouver, ISO, and other styles

7

Batalov, B. G., and A. Yu Vasiliev. "Analysis of the reflected light brightness to determine structural changes in the fluid flow from a spray device." Вестник Пермского университета. Физика, no. 4 (2024): 72–77. https://doi.org/10.17072/1994-3598-2024-4-72-77.

Full text

Abstract:

Visual and instrumental observations of a liquid sprayed by the nozzle showed an uneven distribution of the reflected light brightness in the spray cone. The structure of the spray cone produced by centrifugal nozzles was experimentally investigated. A simple approach to the analysis of spray cone images is proposed, which allows tracking the change in the spray structure. The approach is based on measuring the integral brightness of the reflected light, which is uniquely related to the area of the interface between the media. Measurements showed that the integral brightness changes with inc

APA, Harvard, Vancouver, ISO, and other styles

8

SHEN, YAN, PRASANTA K. SAHOO, and YIPENG PAN. "A STUDY OF COMPOSITE COATINGS ON 22MnCrNiMo STEEL FOR MOORING CHAIN." Surface Review and Letters 25, no. 03 (2018): 1850074. http://dx.doi.org/10.1142/s0218625x18500749.

Full text

Abstract:

In order to enhance the corrosion resistance of mooring chain, the composite coatings are carried out on the surface of 22MnCrNiMo steel for mooring chain by double-pulsed electrodeposition technology using centrifugal force in the rotating device. The microstructure and anti-corrosion performance of the composite coatings have been investigated experimentally. This paper mainly focuses on the experimental work to determine the structural characteristics and corrosion resistance of composite coatings in the presence of nano-SiC. The results show that the presence of nano-SiC has a significant

APA, Harvard, Vancouver, ISO, and other styles

9

Jackson, David. "CO2 Technology Transforms Manufacturing." International Symposium on Microelectronics 2012, no. 1 (2012): 000089–95. http://dx.doi.org/10.4071/isom-2012-ta35.

Full text

Abstract:

CO2 technology provides material and process engineers with a robust surface treatment platform and window for a variety of complex substrates and microscopic geometries. Substrate and surface contamination such as particulate matter, outgassing residues, ionic residues, and heat can be addressed uniquely with this technology. Available treatment processes include composite jet spray, centrifugal immersion, supercritical fluid extraction, critical drying, and both vacuum and atmospheric plasma. CO2 technology eliminates or significantly reduces both lean and green waste generation at the produ

APA, Harvard, Vancouver, ISO, and other styles

10

Pokharel, Peshal, and Lalita Shrestha. "Fabrication of Transparent Thin Film for Application of Thin Film Transistor (TFT) and Microelectronics." Himalayan Journal of Science and Technology 6, no. 1 (2022): 22–28. http://dx.doi.org/10.3126/hijost.v6i1.50645.

Full text

Abstract:

A thin-film transistor (TFT) is a special type of metal-oxide-semiconductor field-effect transistor (MOSFET) made by coating an insulating substrate with layers of an active semiconductor layer, metallic contacts, and the dielectric layer. FET transistors consist of three main components: source, gate, and drain. The main objective of the work is to fabricate the channel component by growing the ZnO nanostructure on the glass substrate using spin coating and spray pyrolysis methods. Thin films of zinc oxide (ZnO) were deposited on glass substrates by spin coating techniques from a precursor so

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Centrifugal spray devices"

1

Гончарук, Сергій Григорович, Сергей Григорьевич Гончарук та Serhii Hryhorovych Honcharuk. "Пути упрочнения и уменьшения износа дисков и пленкообразователей центробежных распылительных устройств". Thesis, Сумский государственный университет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/46848.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!