Academic literature on the topic 'Ceramic green body'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ceramic green body.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ceramic green body"

1

Wang, Mei Li, Jian Zhong Li, Zu Yuan Yu, and Xue Li. "Micro-Drilling of Pre-Sintered Alumina Ceramic." Advanced Materials Research 1120-1121 (July 2015): 27–31. http://dx.doi.org/10.4028/www.scientific.net/amr.1120-1121.27.

Full text
Abstract:
Ceramic materials are widely used in industries because of their excellent properties such as high hardness, strength, resistance to heat and corrosion. The high strength of sintered ceramics posts the difficulty to be processed into the desired shapes and dimensions. Direct processing of ceramic green body is easy to cause edge damage due to the lower strength, leading to low surface accuracy. When the green body of ceramics is pre-sintered, the mechanical strength of green body is enhanced and the machining accuracy is improved. In this paper, micro holes are drilled in ceramics sheets pre-s
APA, Harvard, Vancouver, ISO, and other styles
2

Dai, Chun Lei, Jin Long Yang, and Yong Huang. "Pretreatment Processing of Gelcast Green Body before Debinding." Materials Science Forum 475-479 (January 2005): 1321–24. http://dx.doi.org/10.4028/www.scientific.net/msf.475-479.1321.

Full text
Abstract:
Gelcasting is a novel ceramic forming technology that could be used to manufacture high-performance ceramics with complex shape. However, there are some problems in debinding of large-size green body made by gelcasting. In this paper, a new pretreatment way before binder burn-out was introduced. By means of this pretreatment processing, large-size green bodies with no defects were successfully obtained.
APA, Harvard, Vancouver, ISO, and other styles
3

Fang, C., Yan Xiang Wang, Z. G. Su, and Zhao Xian Xiong. "Gelcasting of BaO-Nd2O3-TiO2 Microwave Ceramics." Key Engineering Materials 280-283 (February 2007): 747–50. http://dx.doi.org/10.4028/www.scientific.net/kem.280-283.747.

Full text
Abstract:
Gelcasting is a novel ceramic forming process for fabricating products of complex-shaped ceramics. In this contribution, the gelcasting process is applied to manufacture green body of microwave ceramic components for resonators, oscillators and antennas. Calcined powders, dispersant and organic monomers are mixed together by ball-milling to acquire high solid loading slurry with low viscosity. After addition of initiator and catalyst, the slurry is cast into a non-pours mold and then polymerized. The slurry is thus solidified in situ and the green bodies with the desired shapes are obtained. T
APA, Harvard, Vancouver, ISO, and other styles
4

Sachidhananda, T. G., and V. Adake Chandrashekhar. "Electric Discharge Machining of Conducting Ceramics - A Review." Materials Science Forum 1019 (January 2021): 121–28. http://dx.doi.org/10.4028/www.scientific.net/msf.1019.121.

Full text
Abstract:
Electrical Discharge machining (EDM) is a nonconventional machining technique, which has been widely used to produce dies and mold. Harder Materials can be machined into complex shapes as long as they conduct electricity. Recent advances in the technologies brought the development of new engineering materials, which are hard to machine with traditional machining processes. Being one of these materials, ceramics possess some unique properties like piezoelectricity and tribological properties which are not found in metal and polymers. EDM is capable of machining these ceramics, given these mater
APA, Harvard, Vancouver, ISO, and other styles
5

ZHANG Ge, 张舸. "Gelcasting process of 1.5m SiC ceramic green body." Optics and Precision Engineering 21, no. 12 (2013): 2989–93. http://dx.doi.org/10.3788/ope.20132112.2989.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Laijun, Huiqing Fan, Liang Fang, Hichem Dammak, and Mai Pham-Thi. "Dielectric characteristic of nanocrystalline Na0.5K0.5NbO3 ceramic green body." Journal of Electroceramics 28, no. 2-3 (2012): 144–48. http://dx.doi.org/10.1007/s10832-012-9695-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Jian-Zhong, Tao Wu, Zu-Yuan Yu, Long Zhang, Guo-Qing Chen, and Dong-Ming Guo. "Micro machining of pre-sintered ceramic green body." Journal of Materials Processing Technology 212, no. 3 (2012): 571–79. http://dx.doi.org/10.1016/j.jmatprotec.2011.10.030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhou, Hai Qiu, Han Ning Xiao, and Xue Yan Hu. "Sintering Behavior of Ceramic Green Body by Thermal Analysis Techniques." Advanced Materials Research 177 (December 2010): 226–30. http://dx.doi.org/10.4028/www.scientific.net/amr.177.226.

Full text
Abstract:
A series of physical and chemical changes, including the shrinkage and the phase transformation, will continuously take place during the sintering process of ceramic green body, which is important for designing a scientific and economic sintering schedule. The sintering behavior of two electrical porcelains and a structural tile were investigated using thermal analysis techniques. The dehydration, phase changes and densification of ceramic green body during sintering process were characterized by DSC-TG and thermal expansion curves. The sintering temperature range of ceramic green body was mea
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Danwei, Erwin Peng, Ramadan Borayek, and Jun Ding. "Controllable Ceramic Green‐Body Configuration for Complex Ceramic Architectures with Fine Features." Advanced Functional Materials 29, no. 12 (2019): 1807082. http://dx.doi.org/10.1002/adfm.201807082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sreckovic, Tatjana. "Sintering of Mechanically Activated Powders." Advances in Science and Technology 45 (October 2006): 619–28. http://dx.doi.org/10.4028/www.scientific.net/ast.45.619.

Full text
Abstract:
Mechanical activation (MA) is used extensively as a relatively no expensive method for the modification of physico-chemical properties of dispersed systems in technologies for obtaining powders and ceramics. Different processes that occur during MA of powders lead to the formation of specific structures that promote and accelerate solid-state reactions, as well as densification during sintering. Changes of particle size and structure during MA of the ceramic parent material are the sources of the morphological and structural metastability of the starting powders and they can affect the sinteri
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Ceramic green body"

1

de, Caussin Dylan Robert. "Design and Testing of a Top Mask Projection Ceramic Stereolithography System for Ceramic Part Manufacturing." DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1625.

Full text
Abstract:
Ceramic manufacturing is an expensive process with long lead times between the initial design and final manufactured part. This limits the use of ceramic as a viable material unless there is a large project budget or high production volume associated with the part. Ceramic stereolithography is an alternative to producing low cost parts through the mixing of a photo curable resin and ceramic particles. This is an additive manufacturing process in which each layer is built upon the previous to produce a green body that can be sintered for a fully dense ceramic part. This thesis introduces a new
APA, Harvard, Vancouver, ISO, and other styles
2

Oummadi, Siham. "Drying behaviour of ceramic green bodies : experimental characterization and numerical modelling." Thesis, Limoges, 2019. http://www.theses.fr/2019LIMO0112.

Full text
Abstract:
Cette thèse s’inscrit dans un objectif à long terme de contrôle et de pilotage en temps réel du séchage des produits céramiques. Pour cela, cette étude se décompose en deux volets. Une première partie expérimentale qui porte sur la détermination en temps réel des paramètres de séchage (température de l’échantillon, teneur en eau et variations dimensionnelles par méthode optique). Une seconde partie, quant à elle, consiste à étudier l’évolution des propriétés physiques des matériaux pendant le séchage pour ensuite construire un modèle numérique macroscopique qui utilise ces données expérimental
APA, Harvard, Vancouver, ISO, and other styles
3

Tung, Ming-Te, and 童明德. "Investigation of PVB binder photo-degradation by nano-Titanium photo-catalyst in green ceramic body." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/96632848923465767955.

Full text
Abstract:
碩士<br>元智大學<br>化學工程學系<br>93<br>Solid-phase photocatalytic degradation of PVB (poly(vinyl butyral)) with nano-TiO2 as photocatalyst was investigated in the room temperature under ultraviolet light irradiation. Kinetic parameters of the composite sample were estimated by thermogravimetry (TG) measurements. Solid-phase photocatalytic reaction mechanism of PVB/TiO2 sample is conducted by diffuse reflectance Fourier transform spectroscopy (DRIFTS). The morphologies of irradiated PVB/TiO2 samples were carried out by using scanning electron microscope (SEM) and atomic forces microscope (AFM) analysis.
APA, Harvard, Vancouver, ISO, and other styles
4

Jing-SiangJhan and 詹景翔. "A study on fabrication of zirconia ceramic green body and sintering by aqueous gel-casting technology." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/4xwhe8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Ceramic green body"

1

Yoshino, K., M. Fuji, T. Shirai, and M. Takahashi. "Effect of Particle Dispersion on a Gel-Cast Green Body." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470917145.ch45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kato, Tomoaki, Takashi Shirai, Hideo Watanabe, Masayoshi Fuji, and Minoru Takahashi. "Effect of the Polymer Structure in a Gelcast Green Body on Graphitization." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470917145.ch46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Uematsu, Keizo, and Nozomu Uchida. "Effect of Packing Structure of Powder Particles in A Ceramic Green Body on Microstructure Development During Densification." In Ceramic Microstructures. Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5393-9_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zeiner, Johannes, and Rolf Clasen. "Fabrication of colored glasses by incorporation of a secondary nanosized phase into a silica green body by means of Reactive Electrophoretic Deposition (REPD)." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118408391.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Yong, and Jinlong Yang. "Generation, Development, Inheritance, and Control of the Defects during the Transformation from Suspension to Green Body." In Novel Colloidal Forming of Ceramics. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12281-1_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gieske, John H., and Harold M. Frost. "Sound Velocity Measurements in Green-Body Ceramics as a Function of Sintering Temperatures." In Review of Progress in Quantitative Nondestructive Evaluation. Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0817-1_216.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Bing, Hui Ling Zhong, Hong Jie Li, Ling Chen, Lin Li, and Xiao Xi Li. "Prediction of the Properties of an Alumina Green Body Using an Artificial Neural Network by a New PSO-Gain Backpropagation Algorithm." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1642.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Saito, Yutaka, Satoshi Tanaka, Nozomu Uchida, and Keizo Uematsu. "New Method to Observe the Internal Structure of a Green Body Using Confocal Laser Scanning Microscope." In Improved Ceramics through New Measurements, Processing, and Standards. The American Ceramic Society, 2012. http://dx.doi.org/10.1002/9781118371480.ch13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ring, Terry A. "Ceramic Green Body Formation." In Fundamentals of Ceramic Powder Processing and Synthesis. Elsevier, 1996. http://dx.doi.org/10.1016/b978-012588930-8/50017-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ring, Terry A. "Green Body Drying." In Fundamentals of Ceramic Powder Processing and Synthesis. Elsevier, 1996. http://dx.doi.org/10.1016/b978-012588930-8/50019-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Ceramic green body"

1

Liu, Binxiang, Xiang Cheng, and Xuan Xiao. "Green ceramic body and glaze formulation system." In Mechanical Engineering and Information Technology (EMEIT). IEEE, 2011. http://dx.doi.org/10.1109/emeit.2011.6023745.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wimmer, Stephanie A., Ming-Jen Pan, Virginia G. DeGiorgi, Edward P. Gorzkowski, and Alan C. Leung. "Modeling Tape Cast Ceramics With Multiple Layers of Fugitive Phase Materials." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-86279.

Full text
Abstract:
The fabrication of complex ceramic components requires new processing methods that are able to produce components with intricate geometries and accurate dimensions. The accuracy of the finished ceramic component depends upon precise control of the green ceramic body dimensions and uniformity prior to sintering. The authors are investigating the application of the fugitive phase approach, where a sacrificial material is used to form cavities or channels in the finished ceramic component. This paper, a continuation of a previous work, examines the lamination step of the fugitive phase approach f
APA, Harvard, Vancouver, ISO, and other styles
3

Adake, Chandrashekar V., Parag Bhargava, Prasanna S. Gandhi, and Bhargava Kashyap. "Fabrication of Tapered Bio Mimetic Cilia Using Bulk Lithography and Ceramic Mold." In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4158.

Full text
Abstract:
This paper presents fabrication of tapered, high aspect ratio bio mimetic cilia from Nickel-polydimethyl siloxane (Ni-PDMS) composite by using bulk lithography technique and ceramic molding. Many research groups suggested fabrication of bio mimetic cilia using various techniques which are based on soft lithography and VLSI techniques. Recently a novel single layer micro fabrication technique known as ‘bulk lithography’ which uses an unconstrained photopolymer has been reported by co-authors. This technique is used to fabricate a polymer cilia pattern (an array of photopolymerised inverted cone
APA, Harvard, Vancouver, ISO, and other styles
4

Wimmer, Stephanie A., Ming-Jen Pan, Virginia G. DeGiorgi, and Edward P. Gorzkowski. "Modeling Tape Cast Ceramics With Layers of Fugitive Phases." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-70312.

Full text
Abstract:
New fabrication methods for topologically complex monolithic ceramic components with accurate dimensions are being investigated. A common problem in the fabrication of precision ceramic components is controlling the forming process to attain uniform density in the green body; otherwise the tolerances achieved with green ceramics do not carry over to acceptable tolerances on the finished ceramic due to distortion and warping that occur during sintering. One of the fabrication methods under study is the fugitive phase approach in which a sacrificial material is used to form the desired channels
APA, Harvard, Vancouver, ISO, and other styles
5

Kellie, Benjamin, and Shaurya Prakash. "Fabrication of Ceramic High Temperature Microsystems." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64476.

Full text
Abstract:
This paper reports on recent advances in fabricating alumina-based ceramic microcombustors for applications in high temperature microsystems. We have fabricated alumina structures with critical dimensions on the order of 1 mm or less by using a gel-casting approach with poly(vinyl) alcohol (PVA) as a non-toxic polymeric binder. Polymer binder content, alumina weight ratio, and thermal cycling were varied systematically to develop microcombustors that can sustain stable flames in a spiral configuration allowing for better mixing of fuel and oxidizer streams for a more uniform heat output. The p
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Xiaolin, Suraj C. Zunjarrao, Hui Zhang, and Raman P. Singh. "Advanced Process Model for Polymer Derived Ceramic Processing." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13824.

Full text
Abstract:
Pyrolysis of preceramic polymers allows a new type of ceramic materials to be processed at a relatively low temperature. The ceramics via polymer pyrolysis display a number of exceptional mechanical, thermal and chemical properties, including high thermal stability, high oxidation/creep resistance, etc. Moreover, they offer better geometrical accuracy compared to conventional ceramics. In addition, thermal induced pyrolysis of organometallic polymer precursors offers the possibility of net shape manufacturing at a lower temperature compared to traditional powder sintering process. The pyrolysi
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!