To see the other types of publications on this topic, follow the link: Changeable flow part.

Journal articles on the topic 'Changeable flow part'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 20 journal articles for your research on the topic 'Changeable flow part.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Radchenko, Mykola, Andrii Radchenko, Eugeniy Trushliakov, Hanna Koshlak, and Roman Radchenko. "Advanced Method of Variable Refrigerant Flow (VRF) Systems Designing to Forecast Onsite Operation—Part 2: Phenomenological Simulation to Recoup Refrigeration Energy." Energies 16, no. 4 (2023): 1922. http://dx.doi.org/10.3390/en16041922.

Full text
Abstract:
This paper focuses on the application of speed-regulated compressors (SRCs) to cover changeable heat loads with high efficiency in conventional air conditioning systems (ACS) as well as in the more advanced variable refrigerant flow (VRF)-type outdoor and indoor ACS. In reality, an SRC is an oversized compressor, although it can operate efficiently at part loads. The higher the level of regulated loads (LRL) of the SRC, the more the compressor is oversized. It is preferable to reduce the size of the SRC by covering the peak loads and recouping the excessive refrigeration energy reserved at dec
APA, Harvard, Vancouver, ISO, and other styles
2

Radchenko, Mykola, Andrii Radchenko, Eugeniy Trushliakov, Anatoliy Pavlenko, and Roman Radchenko. "Advanced Method of Variable Refrigerant Flow (VRF) Systems Designing to Forecast On-Site Operation—Part 1: General Approaches and Criteria." Energies 16, no. 3 (2023): 1381. http://dx.doi.org/10.3390/en16031381.

Full text
Abstract:
All the energetic management and controlling strategies in ambient air conditioning systems (ACS) are aimed to match design load to current needs. This might be achieved by determining a rational value of design thermal load without overestimation that can minimize its deviation from the actual values. The application of variable refrigerant flow (VRF) systems with speed-regulated compressors (SRC) is considered as the most advanced trend in building air conditioning due to the ability of SRCs to cover changeable heat loads without lowering their efficiency. The level of load regulation by SRC
APA, Harvard, Vancouver, ISO, and other styles
3

Radchenko, Mykola, Andrii Radchenko, Eugeniy Trushliakov, Anatoliy Pavlenko, and Roman Radchenko. "Advanced Method of Variable Refrigerant Flow (VRF) System Design to Forecast on Site Operation—Part 3: Optimal Solutions to Minimize Sizes." Energies 16, no. 5 (2023): 2417. http://dx.doi.org/10.3390/en16052417.

Full text
Abstract:
Outdoor air conditioning systems (ACS) are used as autonomic systems as well as in combined outdoor and indoor ACS of the variable refrigerant flow (VRF) type, with variable speed compressors (VSC) as their advanced version. Methods for determining the optimal value of refrigeration capacity and providing the maximum rate of the summarized annual refrigeration energy generation increment, according to its needs at minimum compressor sizes and rational values, are applied to reveal the reserves for reducing the designed (installed) refrigeration capacity, thus enabling us to practically achieve
APA, Harvard, Vancouver, ISO, and other styles
4

Xue, Zhipeng, Jie Fu, and Minmin Zhao. "Numerical Simulation and Analysis of the Arrangement of Wind Direction Meter for Wind Turbine." E3S Web of Conferences 118 (2019): 02040. http://dx.doi.org/10.1051/e3sconf/201911802040.

Full text
Abstract:
This paper performs CFD numerical analysis on the wind direction variation characteristics of the upper part of the platform under the running condition of the whole machine, and analyses whether the current location of the equipment is suitable for placing the wind direction measuring equipment and finding a better position in the area. The vicinity of the reference point is the area where the airflow is relatively intense, and the wind direction is complex and changeable. In-depth CFD research on this flow phenomenon can obtain an intuitive wind direction state and inherently subtle changes.
APA, Harvard, Vancouver, ISO, and other styles
5

Wan, Qia, Youjian Xu, and Can Lu. "A fundamental study of parameter adjustable additive manufacturing process based on FDM process." MATEC Web of Conferences 189 (2018): 05001. http://dx.doi.org/10.1051/matecconf/201818905001.

Full text
Abstract:
In Fused deposition modeling (FDM) process, there has been a confliction between high productivity and high quality of products. The product resolution is proportional to the flow rate of heated material extrusion, which directly affects the build time. To reduce the build time with acceptable resolution, the idea of parameter adjustable printing process has been introduced. The controllable extruder was modified and two types of diameter changeable nozzle have been designed. This work realizes different resolution building based on the part geometry during FDM process, which can efficiently a
APA, Harvard, Vancouver, ISO, and other styles
6

Zhao, Pei Feng, Cun Cang Han, Yan Min Zhang, and Ke Xing Song. "Research and Analysis of Material Flow Regularity in the Process of Cross Wedge Rolling for Wrought Aluminum Alloy." Materials Science Forum 704-705 (December 2011): 172–76. http://dx.doi.org/10.4028/www.scientific.net/msf.704-705.172.

Full text
Abstract:
With widely use of aluminum alloy in the cares and other industry fields and the like, the aluminum alloy workpieces are becoming the important components, such as load bearing and so on, in which it has been gradually paid attention to the formation and the producing roughcast of shaft forging part of aluminum alloy. the process of across wedge rolling for wrought aluminum alloy has gradually taken notice of improving production rate and saving metal in this field because of its advantages and superiorities. It is very necessary to research and analyze the flow regularity and forming characte
APA, Harvard, Vancouver, ISO, and other styles
7

Fridh, Kristina. "From Japanese tradition towards new subjectivity in the architecture of Kengo Kuma and Toyo Ito." Architectural Research Quarterly 21, no. 2 (2017): 113–30. http://dx.doi.org/10.1017/s1359135517000252.

Full text
Abstract:
The Japanese architects Kengo Kuma and Toyo Ito work with the formation of mental processes, which include spatial perceptions, but also haptic experiences. In this regard, they both connect to the Japanese architectural tradition. Therefore, it is interesting to compare their work, especially since visually the architecture of these two architects differs. However, through staged, unexpected and changeable experiences of materiality and spatial organisation – interacting in dynamic flow with the surroundings – similar mental processes are evoked when conceiving and perceiving their architectu
APA, Harvard, Vancouver, ISO, and other styles
8

Piasecka, Magdalena. "An investigation into the influence of different parameters on the onset of boiling in minichannels." Archives of Thermodynamics 33, no. 4 (2011): 67–90. http://dx.doi.org/10.2478/v10173-012-0028-6.

Full text
Abstract:
Abstract The paper presents experimental studies on boiling heat transfer in rectangular minichannels. The investigations focus on the transition from single phase forced convection to nucleate boiling, i.e., in the zone of boiling incipience. The experiment has been carried out with FC-72, R-123 and R-11 at the Reynolds number below 4700, corresponding to mass flow rate range 95-710 kg/(m s). The main part of the test section is a minichannel of pre-set depth from 0.7 to 2 mm and width (20, 40 and 60 mm), with different spatial orientations from vertical to horizontal and 30% inclination angl
APA, Harvard, Vancouver, ISO, and other styles
9

Berkovich, K. M., L. V. Zlotina, and L. A. Turykin. "Riverbank erosion: factors, mechanism, human activity." Geomorphology RAS, no. 2 (April 26, 2019): 3–17. http://dx.doi.org/10.31857/s0435-4281201923-17.

Full text
Abstract:
The riverbank erosion produces a great risk for the urban development, structures and communications located on the banks. Bank erosion, as an integral part of the lateral river channel migrations, is a multi-factorial phenomenon. Empirical evidence suggests that the riverbank erosion depends on the size of the river, the morphology of the bends, water flow; however, a big role plays erosion resistance of the banks, due to their structure and vegetation. It varies at changeable riverbank soils wetting in accordance with the hydrological regime of the river. Human activity contributes significa
APA, Harvard, Vancouver, ISO, and other styles
10

Proussakov, Dmitry. "On a "dead end" in the Egyptian predynastic studies, and on a possible direction of the way out." Vostok. Afro-aziatskie obshchestva: istoriia i sovremennost, no. 4 (2022): 6. http://dx.doi.org/10.31857/s086919080021192-8.

Full text
Abstract:
Studies of the Predynastic Egypt, devoid of reliance on written sources, may enter into a dead end; to overcome it, methods and data of natural sciences are called including the reconstruction of changeable natural conditions of the emergence of ancient Egyptian state. These include: aridization of the North Africa climate in the 4th millennium BC, which favoured the transformation of the Sahara into a desert and the migration of part of its population to the Main Nile; the formation starting from about the 6th millennium BC of fertile silty soils in the Nile floodplain which made it suitable
APA, Harvard, Vancouver, ISO, and other styles
11

Shao, Dongguo, Xizhi Nong, Xuezhi Tan, Shu Chen, Baoli Xu, and Nengjie Hu. "Daily Water Quality Forecast of the South-To-North Water Diversion Project of China Based on the Cuckoo Search-Back Propagation Neural Network." Water 10, no. 10 (2018): 1471. http://dx.doi.org/10.3390/w10101471.

Full text
Abstract:
Water quality forecast is a critical part of water security management. Spatiotemporal and multifactorial variations make water quality very complex and changeable. In this article, a novel model, which was based on back propagation neural network that was optimized by the Cuckoo Search algorithm (hereafter CS-BP model), was applied to forecast daily water quality of the Middle Route of South-to-North Water Diversion Project of China. Nine water quality indicators, including conductivity, chlorophyll content, dissolved oxygen, dissolved organic matter, pH, permanganate index, turbidity, total
APA, Harvard, Vancouver, ISO, and other styles
12

Wang, Hao, and Nanfeng Xiao. "Underwater Object Detection Method Based on Improved Faster RCNN." Applied Sciences 13, no. 4 (2023): 2746. http://dx.doi.org/10.3390/app13042746.

Full text
Abstract:
In order to better utilize and protect marine organisms, reliable underwater object detection methods need to be developed. Due to various influencing factors from complex and changeable underwater environments, the underwater object detection is full of challenges. Therefore, this paper improves a two-stage algorithm of Faster RCNN (Regions with Convolutional Neural Network Feature) to detect holothurian, echinus, scallop, starfish and waterweeds. The improved algorithm has better performance in underwater object detection. Firstly, we improved the backbone network of the Faster RCNN, replaci
APA, Harvard, Vancouver, ISO, and other styles
13

Poznanski, Roman R. "The dynamic organicity theory of consciousness: how consciousness arises from the functionality of multiscale complexity in the material brain." Journal of Multiscale Neuroscience 3, no. 1 (2024): 68–87. http://dx.doi.org/10.56280/1609121701.

Full text
Abstract:
The fine structure of consciousness is temporally experienced. This makes possible a dynamic organicity theory of consciousness through disunified order in the pre-, sub- and noncognitive levels of causal processes and dynamics. This multilevel approach is based on functional systems where space is implicitly grounded as changeable boundary conditions (due to organicity), and energy capture and storage under energy flow entail structuring intrinsic information (as both hidden thermodynamic energy and hidden thermodynamic information). The use of anaesthesia indicates consciousness disappears w
APA, Harvard, Vancouver, ISO, and other styles
14

Furman, Anatoliy. "Categorical matrix of vitacultural methodology: from thought-activity to canon." Psihologìâ ì suspìlʹstvo 2, no. 2023 (2023): 6–50. http://dx.doi.org/10.35774/pis2023.02.006.

Full text
Abstract:
The fundamental methodological development of the categorical matrix as one of the most powerful and the most effective i n s t r u m e n t s of reflexive thought-activity, philosophical and scientific thought-activity and professional methodologization was carried out in the problem field of two oppositely directed and at the same time most promising trends in the methodology development as a newly appeared w o r l d of birth, development and manifestation of hitherto unexplored possibilities of conscious ability and hidden resources of humans pure thinking actualization. The first direction
APA, Harvard, Vancouver, ISO, and other styles
15

TUNA, M. Cihat, and Alp Buğra AYDIN. "Optimization Studies on the Changeable Components of Hydroelectric Power Plants." Turkish Journal of Science and Technology, December 26, 2022. http://dx.doi.org/10.55525/tjst.1192089.

Full text
Abstract:
The design flow rate, the dimensions of the transmission structure and the penstock size have a large impact on the cost of run-of-river type hydroelectric power plants. Equipment costs constitute a large part of the total budget of the plant. Optimum sizing, which maximizes the use of hydraulic potential, does not fit together with optimum sizing, which is necessary to obtain economic benefit from its investment. The main design parameters can be selected with the help of an optimization study in terms of both economic benefit and hydraulic potential. In this study, an easy to implement model
APA, Harvard, Vancouver, ISO, and other styles
16

Wu, Quanyu, Liu Xiaojie, Liu Meijun, Pan Lingjiao, and Qian Chunqi. "ON THE DIFFERENT VELOCITIES OF INLET BOUNDARY CONDITIONS FOR HUMAN ARM ANALYSIS OF ARTERIAL FLOW USING ONE-WAY FLUID–SOLID COUPLING." Biomedical Engineering: Applications, Basis and Communications, August 14, 2021, 2150049. http://dx.doi.org/10.4015/s1016237221500496.

Full text
Abstract:
Simulations for blood hydrodynamic problems have been still largely incomplete despite years of research, especially for the inlet of boundary conditions that served as an essential part in computational fluid dynamics simulations of blood flow in human arteries. In this paper, the four different velocities of inlet boundary conditions were tested and compared in the human arm arterial model developed by us previously. Based on the selected points of nine key areas in the blood model,[Formula: see text] we analyzed the calculation results of pressure and shear stress distributions in detail. O
APA, Harvard, Vancouver, ISO, and other styles
17

Wei, Xuntong, Deyou Li, Hong Chang, Ruiyi Zhang, and Hongjie Wang. "Optimization design on blade with bionic protuberances of horizontal axis wind turbine." Physics of Fluids 36, no. 8 (2024). http://dx.doi.org/10.1063/5.0220885.

Full text
Abstract:
The operating conditions of wind turbines are changeable, and the flow separation limits the power generation capacity. In order to improve the output power of wind turbines, based on the principle of bionics, the leading-edge protuberance (LEP) of the humpback whale flipper is introduced to the blade. The optimization of LEP parameters and distribution on the blade performance is studied. The shape and distribution of nonlinear, non-uniform LEPs are controlled by three design variables: amplitude, attenuation, and number. The optimization system consists of modules such as model generation, c
APA, Harvard, Vancouver, ISO, and other styles
18

Poorhashemi, Abbas, Sobhan Tayebi, and Marzieh Fathi Bornaji. "Heterogeneous Diplomacy of Political Relations between Iran and Afghanistan in exploiting the water of Helmand Border River." International Review of Law 13, no. 1 (2024). http://dx.doi.org/10.29117/irl.2024.0289.

Full text
Abstract:
The water challenge in the Middle East has caused governments to face new problems in which they have to consider more control, management, and care regarding their water resources to survive. Due to growing water consumption by upstream countries of the border rivers in exploiting the resources, we will observe an increase in hydro-political disputes among the nations. Helmand is a river that flows into Iran and includes a hydro-political aspect. It has always influenced the relations between the two countries since the border formation. The fluctuation of the Helmand water flow and decrease
APA, Harvard, Vancouver, ISO, and other styles
19

Leskova, I. A. "An Idea of the Education: the Structure and Content in the Context of the Philosophical Bases Changing." Vestnik of Minin University 9, no. 3 (2021). http://dx.doi.org/10.26795/2307-1281-2021-9-3-10.

Full text
Abstract:
Introduction. Postnonclassical changes in modern education do not have a systemic character, therefore they do not entail qualitative changes in educational practice, that actualizes the need of searching for their system organizing principle. The article considers the idea of education in this capacity.Materials and Methods. In the process of scientific research, the theoretical research methods have been used such as comparative analysis, generalization, interpretation, scientific theorization in the context of the ideas of post-non-classical science and on its methodological basis.Results.
APA, Harvard, Vancouver, ISO, and other styles
20

Rajdeep, singh solanki. "Fuzzy Logic Implementation of Internet of Things and Smart Material Management in the Sector of Automotive Management." December 8, 2022. https://doi.org/10.5281/zenodo.7988395.

Full text
Abstract:
IJFANS International Journal of Food and Nutritional Sciences ISSN PRINT 2319 1775 Online 2320 7876 Research paper © 2012 IJFANS. All Rights Reserved, UGC CARE Listed ( Group -I) Journal Volume 11, Iss 8,December 2022 404 | P a g e Fuzzy Logic Implementation of Internet of Things and Smart Material Management in the Sector of Automotive Management R Nithya1* , P Ranjith Kumar2 , Mahesh Sahebrao Wavare3 , Ajay Singh4 , Ashim Bora5 , Rajdeep Singh solanki6 , Firos A7 1School of Computing Science, KPR College of Arts Science and Research, Coimbatore, Tamil Nadu, India 2Department of Mechanic
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!