Relevant bibliographies by topics / Characterisation of transmission line

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Characterisation of transmission line'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Characterisation of transmission line.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Characterisation of transmission line"

1

Xu, H. X., G. M. Wang, C. X. Zhang, and X. Wang. "Characterisation of composite right/left-handed transmission line." Electronics Letters 47, no. 18 (2011): 1030. http://dx.doi.org/10.1049/el.2010.3707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Carchon, G., and B. Nauwelaers. "Accurate transmission line characterisation on high and low-resistivity substrates." IEE Proceedings - Microwaves, Antennas and Propagation 148, no. 5 (2001): 285. http://dx.doi.org/10.1049/ip-map:20010675.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kim, Dongchul, Hyewon Kim, and Yungseon Eo. "A novel transmission line characterisation based on measurement data reconfirmation." International Journal of Electronics 101, no. 4 (April 29, 2013): 479–91. http://dx.doi.org/10.1080/00207217.2013.785032.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cassidy, P. "Electromagnetic characterisation of MR RF coils using the transmission-line modelling method." Magnetic Resonance Materials in Biology, Physics, and Medicine 14, no. 1 (March 1, 2002): 20–29. http://dx.doi.org/10.1016/s1352-8661(01)00153-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cassidy, P. J., S. Grieve, K. Clarke, and D. J. Edwards. "Electromagnetic characterisation of MR RF coils using the transmission-line modelling method." Magma: Magnetic Resonance Materials in Physics, Biology, and Medicine 14, no. 1 (February 2002): 20–29. http://dx.doi.org/10.1007/bf02668183.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lee, H. S., D. H. Shin, Y. H. Chun, S. C. Kim, B. O. Lim, T. J. Baek, S. K. Kim, H. C. Park, and J. K. Rhee. "Design and characterisation of micromachined transmission line with dielectric post for millimetre-wave applications." Electronics Letters 39, no. 25 (2003): 1827. http://dx.doi.org/10.1049/el:20031193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kim, D., H. Kim, and Y. Eo. "Experimental characterisations of thin film transmission line losses." Electronics Letters 49, no. 17 (August 2013): 1084–86. http://dx.doi.org/10.1049/el.2013.1444.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Oluyomi Ajibade, Adedayo, llesanmi Banjo Oluwafemi, and Israel Esan Owolabi. "Characterisation of Signal Amplitude-Frequency for Indoor Power Line Communication Channel in the 1 — 30 MHz Broadband Frequencies." International journal of electrical and computer engineering systems 12, no. 1 (April 21, 2021): 33–41. http://dx.doi.org/10.32985/ijeces.12.1.4.

Full text
Abstract:
The transmission of data signals over power lines is a very promising technique for delivering indoor broadband communication services. However, since power grids were originally designed for high-voltage low-frequency signal transmission, there is a frequency mismatch between the power grid and high-frequency data signals. This mismatch poses a challenge to deploying power lines as a communication channel. Although, studies and researches conducted in several countries have made transmission of data over power lines possible, the behaviour and properties of the power grid cannot be generalised. Hence, the need for in-depth experiment and measurement on the suitability and capability of the Nigerian power grid for data transmission is crucial for proper characterising and modelling of the power line communication (PLC) channel. In this paper, we present experimental measurements and results of the effects of frequency variations on the attenuation experienced by broadband high-speed data signals transmitted over the Nigerian indoor power line network.
APA, Harvard, Vancouver, ISO, and other styles
9

Ng, Sing K., Paul Ainsworth, Andrew Plunkett, Arthur D. Haigh, Andrew A. P. Gibson, Graham Parkinson, Valentina Stojceska, and George Jacobs. "The characterisation of extruded brewer’s spent grain and resistant starch using a microwave transmission line technique." Journal of Food Engineering 83, no. 4 (December 2007): 614–20. http://dx.doi.org/10.1016/j.jfoodeng.2007.04.018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Qureshi, Suhail Asghar, Zuhairiah Zainal Abidin, Adel Yahya Isa Ashyap, Huda A. Majid, Muhammad Ramlee Kamarudin, Ma Yue, Mohd Syis Zulkipli, and Jamel Nebhen. "Millimetre-Wave Metamaterial-Based Sensor for Characterisation of Cooking Oils." International Journal of Antennas and Propagation 2021 (March 12, 2021): 1–10. http://dx.doi.org/10.1155/2021/5520268.

Full text
Abstract:
The characterisation of the cooking oils presents a significant challenge due to minor changes in their dielectric behaviour. In this paper, a new metamaterial-based sensor incorporating a split-ring resonator (SRR) with a microstrip transmission line is presented to characterise cooking oils. The design demonstrates metamaterial characteristics of negative permittivity and permeability simultaneously at the resonance frequency. Furthermore, its operation in the range of millimetre-wave frequencies can further enhance its sensitivity, especially for liquid materials. The sensor’s novelty is the operation at millimetre-wave frequencies that offers a high shift in the transmission coefficient while operating at 30 GHz. The sensor’s performance analysis is undertaken by using six MUTs with dielectric constants ranging from 0.126 to 4.47. The presented structure designed on 12 × 8 mm2 Rogers substrate offers a sensitivity of 1.12 GHz per unit change in dielectric constant. The phase's shift demonstrates a lower percentage error than the amplitude and linearly moves towards higher frequencies with the increase in dielectric constant and tangent loss of MUT. The designed sensor can be prominently useful for detecting liquids' chemical characteristics in chemistry and medicine fields.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Characterisation of transmission line"

1

Minnaar, Ulrich. "The characterisation and automatic classification of transmission line faults." Doctoral thesis, University of Cape Town, 2014. http://hdl.handle.net/11427/9287.

Full text
Abstract:
Includes bibliographical references.
A country's ability to sustain and grow its industrial and commercial activities is highly dependent on a reliable electricity supply. Electrical faults on transmission lines are a cause of both interruptions to supply and voltage dips. These are the most common events impacting electricity users and also have the largest financial impact on them. This research focuses on understanding the causes of transmission line faults and developing methods to automatically identify these causes. Records of faults occurring on the South African power transmission system over a 16-year period have been collected and analysed to find statistical relationships between local climate, key design parameters of the overhead lines and the main causes of power system faults. The results characterize the performance of the South African transmission system on a probabilistic basis and illustrate differences in fault cause statistics for the summer and winter rainfall areas of South Africa and for different times of the year and day. This analysis lays a foundation for reliability analysis and fault pattern recognition taking environmental features such as local geography, climate and power system parameters into account. A key aspect of using pattern recognition techniques is selecting appropriate classifying features. Transmission line fault waveforms are characterised by instantaneous symmetrical component analysis to describe the transient and steady state fault conditions. The waveform and environmental features are used to develop single nearest neighbour classifiers to identify the underlying cause of transmission line faults. A classification accuracy of 86% is achieved using a single nearest neighbour classifier. This classification performance is found to be superior to that of decision tree, artificial neural network and naïve Bayes classifiers. The results achieved demonstrate that transmission line faults can be automatically classified according to cause.
APA, Harvard, Vancouver, ISO, and other styles
2

Johansson, Christian, and Marcus Karlsson. "Characterisation of a data transmission link." Thesis, Linköping University, Department of Science and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2359.

Full text
Abstract:

This report is the result of a Master Thesis work that has been performed between October 2003 and March 2004. The purpose of the work was to evaluate a part of the signal chain in a product of Micronic Laser Systems AB. The evaluation was performed to obtain the characterisation for the signal chain, such as impedances and crosstalk.

The work started with a literature study in order to refresh and increase the knowledge that was needed before the practical work. Then measurements, computer aided simulations and comparisons between these were performed.

Measurements were performed using TDR (Time Domain Reflectometry). The results showed the impedance levels along the signal chain. This was interesting since it showed how well the different parts in the system are matched. Unmatched parts result in reflections that disturb the transmitted signal and contribute to crosstalk, which also was measured.

Simulations were done using ADS (Advance Design System), a tool from Agilent Technologies Inc. A substantial part of the simulation work was to build models of the real system. These models have been used for simulation. The simulation results were then compared to the measurement results.

The results show that the system can be better matched concerning the channel impedance. There are large variations in impedance levels along the signal chain, resulting in signal reflections. Another effect studied is crosstalk between channels. Measurements and simulations showed the presence of crosstalk but it seems to be a minor problem in the current machine.

APA, Harvard, Vancouver, ISO, and other styles
3

Rossi, Jose Osvaldo. "Transmission line transformers." Thesis, University of Oxford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.284500.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

KLAUSNER, JEREMIAS CORAL. "TRANSMISSION LINE MODEL." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1992. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=8740@1.

Full text
Abstract:
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
Este trabalho apresenta uma metodologia para simulação de linhas de transmissão, geradores, interconexões e cargas por modelos baseados em filtragem digital. Estes modelos usam de maneira intensiva o conceito de redes digitais equivalentes, para resolver problemas aliados à responsabilidade dos filtros digitais em redes onde haja interconexão de elementos, desde simples cargas a subredes. O resultado deste trabalho é um sistema que representa de maneira quase que integral o espectro do sinal discretizado, em contraposição aos métodos tradicionalmente encontrados na simulação de sistemas deste tipo por computador digital. Por outro lado o processo é facilmente implementado por processadores digitais de sinal (DSPs), resultado em simulações em tempo rela comparáveis a simulações off-line por aplicativos
This thesis introduces a metodology for the simulation of transmission lines, power generators, interconnnections and loads, base don digital filtering models. These models make intensive use of digital equivalent network concepts in order to solve the computability problem of the digital filter. The result of this work is a system that represents the discrete-time signal on a bandwsiths covering up to the Nyquist frequency, in contraposition with traditional methods of computer simulation. The structure is easily implemented with Digital signal Processors (DSPs), resulting in real time simulations that compare to off-line circuit simulators in precision.
APA, Harvard, Vancouver, ISO, and other styles
5

Lapohos, Tibor. "Multiconductor transmission line networks." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0012/NQ31123.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Becker, Matthew E. (Matthew Erin). "Resonant transmission line drivers." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/81519.

Full text
Abstract:
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2000.
Includes bibliographical references (leaves 71-72).
by Matthew E. Becker.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
7

Cooke, Bradly James. "S-parameter VLSI transmission line analysis." Diss., The University of Arizona, 1989. http://hdl.handle.net/10150/184876.

Full text
Abstract:
This dissertation investigates the implementation of S-parameter based network techniques for the analysis of multiconductor, high speed VLSI integrated circuit and packaging interconnects. The S-parameters can be derived from three categories of input parameters: (1) lossy quasi-static R,L,C and G, (2) lossy frequency dependent (dispersive) R,L,C,G and (3) the propagation constants, Γ, the characteristic impedance, Z(c) and the conductor eigencurrents, I, derived from full wave analysis. The S-parameter network techniques developed allow for: the analysis of periodic waveform excitation, the incorporation of externally measured or calculated scattering parameter data and large system analysis through macro decomposition. The inclusion of non-linear terminations has also been developed.
APA, Harvard, Vancouver, ISO, and other styles
8

Ahmeda, Mohammad. "Earthing performance of transmission line towers." Thesis, Cardiff University, 2012. http://orca.cf.ac.uk/42730/.

Full text
Abstract:
This work is primarily concerned with the performance of tower base earthing systems under AC variable frequency and transient conditions. The work has involved the investigation into the performance of practical earthing systems including tests on a full-size 275kV transmission tower base and corresponding calculation and numerical simulations.
APA, Harvard, Vancouver, ISO, and other styles
9

Kang, Ning. "ADVANCEMENTS IN TRANSMISSION LINE FAULT LOCATION." UKnowledge, 2010. http://uknowledge.uky.edu/gradschool_diss/69.

Full text
Abstract:
In modern power transmission systems, the double-circuit line structure is increasingly adopted. However, due to the mutual coupling between the parallel lines it is quite challenging to design accurate fault location algorithms. Moreover, the widely used series compensator and its protective device introduce harmonics and non-linearities to the transmission lines, which make fault location more difficult. To tackle these problems, this dissertation is committed to developing advanced fault location methods for double-circuit and series-compensated transmission lines. Algorithms utilizing sparse measurements for pinpointing the location of short-circuit faults on double-circuit lines are proposed. By decomposing the original network into three sequence networks, the bus impedance matrix for each network with the addition of the fictitious fault bus can be formulated. It is a function of the unknown fault location. With the augmented bus impedance matrices the sequence voltage change during the fault at any bus can be expressed in terms of the corresponding sequence fault current and the transfer impedance between the fault bus and the measured bus. Resorting to VCR the superimposed sequence current at any branch can be expressed with respect to the pertaining sequence fault current and transfer impedance terms. Obeying boundary conditions of different fault types, four different classes of fault location algorithms utilizing either voltage phasors, or phase voltage magnitudes, or current phasors, or phase current magnitudes are derived. The distinguishing charactristic of the proposed method is that the data measurements need not stem from the faulted section itself. Quite satisfactory results have been obtained using EMTP simulation studies. A fault location algorithm for series-compensated transmission lines that employs two-terminal unsynchronized voltage and current measurements has been implemented. For the distinct cases that the fault occurs either on the left or on the right side of the series compensator, two subroutines are developed. In additon, the procedure to identify the correct fault location estimate is described in this work. Simulation studies carried out with Matlab SimPowerSystems show that the fault location results are very accurate.
APA, Harvard, Vancouver, ISO, and other styles
10

Lowery, A. J. "Transmission line modelling of semiconductor lasers." Thesis, University of Nottingham, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.384697.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Characterisation of transmission line"

1

Sevick, Jerry. Transmission line transformers. 4th ed. Atlanta, GA: Noble Pub. Corp., 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sevick, Jerry. Transmission line transformers. 2nd ed. Newington, CT: American Radio Relay League, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wadell, Brian C. Transmission line design handbook. Boston: Artech House, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Electric transmission line fundamentals. Reston, Va: Reston Pub. Co., 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Malherbe, J. A. G. Microwave transmission line couplers. Norwood, MA: Artech House, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Microwave transmission-line impedance data. Atlanta, Ga: Noble Pub., 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Maclean, D. J. H. Optical line systems: Transmission aspects. Chichester [England]: John Wiley & Sons, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Multiple mechanism propagation paths (MMPPs): their characterisation and influence on system design. Neuilly sur Seine, France: AGARD, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dworsky, Lawrence N. Modern transmission line theory and applications. Malabar, Fla: R.E. Krieger Pub. Co., 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hart, Bryan. Digital signal transmission: Line circuit technology. Wokingham: Van Nostrand Reinhold, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Characterisation of transmission line"

1

Weik, Martin H. "transmission line." In Computer Science and Communications Dictionary, 1823. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_20009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Davidson, C. W. "Transmission-line Measurements." In Transmission Lines for Communications, 92–121. London: Palgrave Macmillan UK, 1989. http://dx.doi.org/10.1007/978-1-349-19995-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hanson, George W., and Alexander B. Yakovlev. "Transmission-Line Analysis." In Operator Theory for Electromagnetics, 403–20. New York, NY: Springer New York, 2002. http://dx.doi.org/10.1007/978-1-4757-3679-3_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schwab, Adolf J. "Transmission-Line Equations." In Field Theory Concepts, 139–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-48941-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Weik, Martin H. "artificial transmission line." In Computer Science and Communications Dictionary, 65. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_862.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bartiromo, Rosario, and Mario De Vincenzi. "The Transmission Line." In Undergraduate Lecture Notes in Physics, 231–50. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31102-9_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Weik, Martin H. "uniform transmission line." In Computer Science and Communications Dictionary, 1861. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_20424.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Awang, Zaiki. "Transmission Line Analysis." In Microwave Systems Design, 51–100. Singapore: Springer Singapore, 2013. http://dx.doi.org/10.1007/978-981-4451-24-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Benson, F. A., and T. M. Benson. "Transmission line theory." In Fields, Waves and Transmission Lines, 31–49. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-2382-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pulyer, Yuly M. "Magnetic Transmission Line." In Electromagnetic Devices for Motion Control and Signal Processing, 67–180. New York, NY: Springer New York, 1992. http://dx.doi.org/10.1007/978-1-4612-2928-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Characterisation of transmission line"

1

Milford, G. N. "Two optimiser approach to transmission line metamaterial dispersion characterisation." In 2010 IEEE International Symposium Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting. IEEE, 2010. http://dx.doi.org/10.1109/aps.2010.5561262.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Floyd, Liam, John Pike, Jing Tao, and Nathan Jackson. "Observations on substrate characterisation through Coplanar Transmission Line Impedance measurements." In 2015 International Conference on Microelectronic Test Structures (ICMTS). IEEE, 2015. http://dx.doi.org/10.1109/icmts.2015.7106099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Milford, G. N. "Dispersion characterisation of a composite right-left-hand transmission line unit cell using Particle Swarm Optimisation." In amp; USNC/URSI National Radio Science Meeting. IEEE, 2009. http://dx.doi.org/10.1109/aps.2009.5172115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Finlay, H. J., J. A. Jenkins, and R. S. Pengelly. "The Prediction and Characterisation of Coupling Between Transmission Line Structures to Enhance CAD of MMIC GaAs Circuits." In 13th European Microwave Conference, 1983. IEEE, 2006. http://dx.doi.org/10.1109/euma.1983.333254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cassidy, P. J. "Validation of the transmission-line modelling method for the electromagnetic characterisation of magnetic resonance imaging radio-frequency coils." In IEE Validation of Computational Electromagnetics Seminar. IEE, 2004. http://dx.doi.org/10.1049/ic:20040109.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sercu, Jeannick, Niels Fache, and Daniel De Zutter. "Characterisation of TEM and non-TEM planar transmission lines with a full-wave 3D field analysis technique." In 23rd European Microwave Conference, 1993. IEEE, 1993. http://dx.doi.org/10.1109/euma.1993.336883.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Giuliani, Fabrice, Bernhard Wagner, Jakob Woisetschla¨ger, and Franz Heitmeir. "Laser Vibrometry for Real-Time Combustion Stability Diagnostic." In ASME Turbo Expo 2006: Power for Land, Sea, and Air. ASMEDC, 2006. http://dx.doi.org/10.1115/gt2006-90413.

Full text
Abstract:
Laser-based diagnostics for combustion monitoring are promising sensing techniques for the upcoming generation of build-in gas turbines measurement and control devices. Their principles are usually based on direct measurement of line-of-sight transmission, absorption, scattering or re-emission of laser light through the flame. We discuss here how a similar method based this time on interferometry can provide a refined analysis on dynamics of injected reactants and flame stability. Measurements are performed on a resonant premixed air/methane flame using Laser Vibrometry (LV). A method for detection of combustion instability within the primary zone is described, and dual LV measurements performed over the full flame cross section provide a refined analysis of the flow patterns. This technique, originally dedicated to structural dynamics, shows a high potential for low-cost and rapid flow characterisation during the benchmark tests of a gas turbine combustor. The discussion ends on feasibility for embarking Laser Vibrometry as a real-time combustion monitor.
APA, Harvard, Vancouver, ISO, and other styles
8

Kim, Dongchul, Taehoon Kim, Jung-A. Lee, and Yungseon Eo. "Experimental Characterisations of Coupled Transmission Lines." In 4th IEEE International Symposium on Electronic Design, Test and Applications (delta 2008). IEEE, 2008. http://dx.doi.org/10.1109/delta.2008.16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tancock, Scott, John Rarity, and Naim Dahnoun. "Temperature Characterisation of the DSP Delay Line." In 2021 7th International Conference on Event-Based Control, Communication, and Signal Processing (EBCCSP). IEEE, 2021. http://dx.doi.org/10.1109/ebccsp53293.2021.9502362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Byron Krauter. "Transmission Line Synthesis." In 32nd Design Automation Conference. ACM, 1995. http://dx.doi.org/10.1109/dac.1995.249973.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Characterisation of transmission line"

1

Bigelow, Tim S. EC Transmission Line Materials. Office of Scientific and Technical Information (OSTI), May 2012. http://dx.doi.org/10.2172/1047023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hughes, K. R., and D. R. Brown. Transmission line capital costs. Office of Scientific and Technical Information (OSTI), May 1995. http://dx.doi.org/10.2172/67758.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kozak, Frank E., and Daniel T. McGrath. Printed Circuit Transmission Line Transitions. Fort Belvoir, VA: Defense Technical Information Center, December 1985. http://dx.doi.org/10.21236/ada169291.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

John Svoboda. Transmission Line Security Monitor: Final Report. Office of Scientific and Technical Information (OSTI), April 2011. http://dx.doi.org/10.2172/1016198.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jackson, J., E. Pentecost, and J. Muzzarelli. Transmission line environmental assessment guidance document. Office of Scientific and Technical Information (OSTI), January 1994. http://dx.doi.org/10.2172/10129180.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bent, Russell Whitford, Mowen Lu, Scott N. Backhaus, Harsha Nagarajan, and Emre Yamangil. Optimal Transmission Line Switching under Geomagnetic Disturbances. Office of Scientific and Technical Information (OSTI), September 2016. http://dx.doi.org/10.2172/1321712.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Clague, Fred R. Microcalorimeter for 7 mm coaxial transmission line. Gaithersburg, MD: National Bureau of Standards, 1993. http://dx.doi.org/10.6028/nist.tn.1358.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bigelow, Tim S. EC Transmission Line Risk Identification and Analysis. Office of Scientific and Technical Information (OSTI), April 2012. http://dx.doi.org/10.2172/1038483.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Warne, L. K., R. D. Moyer, T. E. Koontz, and M. E. Morris. A radial transmission line material measurement apparatus. Office of Scientific and Technical Information (OSTI), May 1993. http://dx.doi.org/10.2172/10175331.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hahn, H., and E. B. Forsyth. Transmission Line Analysis of Dielectric-Loaded Ferrite Kicker. Office of Scientific and Technical Information (OSTI), June 1994. http://dx.doi.org/10.2172/1120513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Characterisation of transmission line' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography