Relevant bibliographies by topics / Characteristics of bronze powder

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Characteristics of bronze powder'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Characteristics of bronze powder.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Characteristics of bronze powder"

1

Luzan, Sergii, and Vyacheslav Bantkovskiy. "Increasing the anti-friction properties of the surfaces of machine parts through plasma spraying of powder coating PG-19M-01 instead of cast bronze bushing." Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction, no. 1 (October 16, 2023): 47–54. http://dx.doi.org/10.20998/2078-6840.2023.1.05.

Full text
Abstract:
The anti-friction properties of the plasma-sprayed powder coating based on copper PG-19M-01, proposed instead of the cast bronze sleeve made of 05Ts5S5 bronze, used in the coupling of the drive shaft and gear of the T-155 transfer case pumps, were proposed and investigated in the paper. X-ray phase analysis of plasma coatings from PG-19M-01 powder showed that the main phase in the coatings is a solid solution of aluminum in copper. X-ray microspectral analysis established that the composition of the coating is heterogeneous in thickness. The results of the conducted research and field tests sh
APA, Harvard, Vancouver, ISO, and other styles
2

Uhlmann, Eckart, Julian Polte, Janek Maria Fasselt, et al. "A Comparative Evaluation of Powder Characteristics of Recycled Material from Bronze Grinding Chips for Additive Manufacturing." Materials 17, no. 14 (2024): 3396. http://dx.doi.org/10.3390/ma17143396.

Full text
Abstract:
In the manufacturing process of ship propellers, large quantities of grinding chips are generated. These grinding chips result from the finishing of the blade surfaces after the primary casting process of the propeller. The aim of this study was to investigate and compare different preparation processes used to produce chip powders with sufficient powder quality for the additive manufacturing process of directed energy deposition. The preparation of the samples was performed through different sieving, milling and re-melting processes. For the characterization of the prepared samples, powder an
APA, Harvard, Vancouver, ISO, and other styles
3

Karlov, V. I., and Yu I. Krykhtin. "Investigation of the Composition, Structure and Properties of New Porous Powder Friction Coatings Obtained by Plasma Sputtering." MATEC Web of Conferences 346 (2021): 02031. http://dx.doi.org/10.1051/matecconf/202134602031.

Full text
Abstract:
The paper investigates processes of composition selection, structure formation and properties of new porous powder friction materials based on molybdenum (Mo), on aluminum-iron bronze (БpAЖ(SiC)) or steel (40X13) obtained by plasma spraying. The study can be used in the frictional devices of transmissions of tracked vehicles with a high specific power to increase the tribotechnical, operational and technological characteristics.
APA, Harvard, Vancouver, ISO, and other styles
4

Akhtar, S., A. Ali, A. Haider, and M. Farooque. "Measurement of Loose Powder Density." Key Engineering Materials 510-511 (May 2012): 597–601. http://dx.doi.org/10.4028/www.scientific.net/kem.510-511.597.

Full text
Abstract:
Powder metallurgy is a conventional technique for making engineering articles from powders. Main objective is to produce final products with the highest possible uniform density, which depends on the initial loose powder characteristics. Producing, handling, characterizing and compacting materials in loose powder form are part of the manufacturing processes. Density of loose metallic or ceramic powder is an important parameter for die design. Loose powder density is required for calculating the exact mass of powder to fill the die cavity for producing intended green density of the powder compa
APA, Harvard, Vancouver, ISO, and other styles
5

Gutko, Yu I., and V. V. Voytenko. "Experimental impact study of ultra‑fine metal powders on technical characteristics and physical properties of foundry sodium silicate sand cores." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 1 (April 10, 2024): 20–25. http://dx.doi.org/10.21122/1683-6065-2024-1-20-25.

Full text
Abstract:
The results of the experimental impact study for the mass fractions of ultra‑fine metal powders added into compositions of core mixtures on technical characteristics and physical properties of the foundry sodium silicate sand cores under influence of high temperatures during production of metal castings are presented and discussed. The dependences for technical characteristics and physical properties of the cores on the mass fractions of ultra‑fine powders based on aluminum, steel, and bronze are established. The significant reserves for improving a knocking‑out ability of the cores based on p
APA, Harvard, Vancouver, ISO, and other styles
6

Feraru (Ilie), Mihaela, Simona-Nicoleta Mazurchevici, Marcelin Benchea, Daniela-Lucia Chicet, Teodor Daniel Mindru, and Dumitru Nedelcu. "ENHANCED SURFACE CHARACTERISTICS OF COOPER COATED 3D PRINTED PARTS." International Journal of Modern Manufacturing Technologies 16, no. 2 (2024): 106–12. https://doi.org/10.54684/ijmmt.2024.16.2.106.

Full text
Abstract:
Copper metal powder being highly thermally and electrically conductive. It has a lot of uses such as: manufacture of soft magnets, sintered components, friction products, surface coating etc. This publication examines the properties of biodegradable polymers (PLA and HD PLA Green) coated with two different bronze alloy powders, Metco 51F-NS (Cu 9.5Al 1.2Fe) and Metco 445 (Cu 9.5Al). The coating was applied to printed samples using the Atmospheric Plasma Spray (APS) process. This inquiry will elucidate the findings concerning surface quality, microstructure, microindentation, and scratch testin
APA, Harvard, Vancouver, ISO, and other styles
7

ROMANOV, I. V. "HE USE OF SECONDARY POWDER MATERIALS FOR THE RESTORATION OF BRONZE PARTS OF HYDRAULIC MACHINES." Tekhnicheskiy servis mashin 62, no. 1 (2024): 73–79. http://dx.doi.org/10.22314/2618-8287-2024-62-1-73-79.

Full text
Abstract:
During the operation of agricultural machinery, machine parts and their connections lose their operability, which requires their replacement. The cost of restoration is 50-60 percent of the cost of a new part. The presence of non-ferrous metal and alloy parts in the equipment, and in particular bronze, makes the issue of restoration even more urgent due to the high cost of such parts. Methods using powder materials are particularly successful in restoring worn parts. It is characteristic that in order to reduce the cost of such technologies, it is possible to resort to recycling of metal waste
APA, Harvard, Vancouver, ISO, and other styles
8

Romanov, Il’ya V. "EXPERIMENTAL SELECTION OF ELECTRIC SPARK TREATMENT FOR ELECTRODES OBTAINED BY VARIOUS METHODS." Tekhnicheskiy servis mashin 3, no. 144 (2021): 84–93. http://dx.doi.org/10.22314/2618-8287-2021-59-3-84-93.

Full text
Abstract:
Electric spark surface treatment is widely used in repair production. Its high versatility is ensured by a wide range of electrical modes and the possibility of using all conductive materials as electrodes. The selection of optimal electrical modes of the electric spark processing installation is important for obtaining high-quality coatings when using a specific electrode. This problem is especially acute for new electrode materials obtained from machine-building waste, since such electrodes are still poorly studied. (Research purpose) The research purpose is in experimentally selecting optim
APA, Harvard, Vancouver, ISO, and other styles
9

Kwon, Heehong. "Corrosion Behaviors of Artificial Chloride Patina for Studying Bronze Sculpture Corrosion in Marine Environments." Coatings 13, no. 9 (2023): 1630. http://dx.doi.org/10.3390/coatings13091630.

Full text
Abstract:
Copper trihydroxychlorides, which are known as “bronze disease”, are dangerous corrosion products that compromise the stability and conservation of bronze sculptures. Here, we performed artificial patina corrosion experiments on quaternary bronze (Cu-Zn-Sn-Pb) to examine the corrosion behavior of the chloride patina commonly found in bronze objects in marine environments. The chromaticity and reflectance of the patina in the context of the corrosion products indicate that copper trihydroxychloride, which is commonly found in a single color in marine environments, was produced early in the corr
APA, Harvard, Vancouver, ISO, and other styles
10

Devoino, O. G., A. V. Gorbunov, Chenchong Wang, et al. "Investigation of Upgraded Technology for Plasma Spraying of Bronze Powder Using the Combined Process with Hydrocarbon Additions." Science & Technique 22, no. 2 (2023): 103–12. http://dx.doi.org/10.21122/2227-1031-2023-22-2-103-112.

Full text
Abstract:
The object of the research is thermal spray process for the formation of metal coating from bronze powder in plasma-fuel variant, using direct current (DC) electric arc plasma torch, on steel samples. The aim of the work was to investigate and develop the technology for plasma-fuel spraying of functional coatings (for wear-resistant and antimicrobial applications) on machine-building and medical purpose pieces with increased process capacity and moderate energy consumptions in a comparison with conventional thermal spray technologies with use of inert and oxygen-free gas media. During the stud
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Characteristics of bronze powder"

1

Costa, JanaÃna de Paula da. "Shrimp powder obtained by spray dryer: characteristics and application." Universidade Federal do CearÃ, 2015. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=15698.

Full text
Abstract:
FundaÃÃo Cearense de Apoio ao Desenvolvimento Cientifico e TecnolÃgico<br>A maior necessidade por produtos de conveniÃncia, fÃceis de preparar, motivada pelo novo estilo de vida e, ainda, a invasÃo das prateleiras por produtos estrangeiros de alta qualidade e diversificaÃÃo, vÃm modificando o tradicional consumidor de alimentos. O objetivo desse trabalho foi obter camarÃo em pà por meio da aplicaÃÃo do processo de spray dryer, assim como determinar sua composiÃÃo centesimal, caracterÃsticas fÃsico-quÃmicas, estudar a estabilidade do produto embalado em dois tipos de embalagens (laminada e poli
APA, Harvard, Vancouver, ISO, and other styles
2

Igharo, M. "The characteristics of titanium-nickel alloys produced by powder technology." Thesis, Open University, 1987. http://oro.open.ac.uk/54610/.

Full text
Abstract:
A range of titanium-nickel alloys near the equiatomic composition have been processed by cold compaction and vacuum sintering. The effects of compaction pressure, sintering temperature and powder particle size on dimensional changes and densities of sintered compacts are presented. The influence of composition and heat treatment on micro hardness and transformation temperature (M<sub>s</sub>) is described. During sintering, anisotropy of dimensional change occurs, with expansion in the radial and contraction in the axial direction of cylindrical compacts. Greater porosity is found in the sinte
APA, Harvard, Vancouver, ISO, and other styles
3

Hamouda, Karim. "Bronze-Steel Friction Characteristics under the Lubrication of Modified Water/Glycerol Mixtures." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-65217.

Full text
Abstract:
Increasing environmental awareness has driven a lot of research to look into various environmentally friendly lubricants which can replace more conventional mineral oil based lubricants. This is true in particular for marine and hydropower applications where the risk of lubricant leakage can be damaging to the local environment. Glycerol is an organic compound produced as a byproduct when producing Biodiesel. It is environmentally friendly and has been used by the pharmaceutical and food industries for a long time. Recent research has shown that glycerol has very good tribological properties a
APA, Harvard, Vancouver, ISO, and other styles
4

Drathen, Christina. "Transition metal fluorides : from superconductors to multiferroics." Thesis, University of Edinburgh, 2013. http://hdl.handle.net/1842/6687.

Full text
Abstract:
Transition metal fluorides represent an important family of complex solids displaying a variety of different properties and interesting phenomena. Despite their remarkable behaviour, these classes of materials have not received much attention and the rationalization of their behaviour is still lacking a systematic approach. This thesis aims to contribute to the field by examining previously unknown or understudied complex fluorides. The compounds were selected for their intriguing physical properties that range from superconductivity to multiferroism. The discovery of superconductivity in the
APA, Harvard, Vancouver, ISO, and other styles
5

Silveira, Fabricio Dreher. "Sinterização de bronze ao alumínio seguido de endurecimento por precipitação através de envelhecimento artificial." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2009. http://hdl.handle.net/10183/17624.

Full text
Abstract:
O experimento teve como objetivo o desenvolvimento de uma bucha de bronze ao alumínio de alta dureza através do processo de metalurgia do pó e endurecimento por precipitação. Iniciou-se pela definição da liga de bronze equivalente que atingiria os resultados obtidos pelo processo de fundição, ou seja, dureza final acima de 190 HB. Foram elaboradas ligas por metalurgia do pó com cobre como base e alumínio, sendo que a utilizada no processo de fundição não apresentou bons resultados na adaptação para a sinterização. Foram realizados ensaios de compactação visando a maior densidade à verde possív
APA, Harvard, Vancouver, ISO, and other styles
6

Gardner, Jonathan. "Ferroelectricity in empty tetragonal tungsten bronzes." Thesis, University of St Andrews, 2017. http://hdl.handle.net/10023/10592.

Full text
Abstract:
In this work, in-depth structural and electrical characterisation is used to study a family of “empty” tetragonal tungsten bronzes (TTBs), A2₄A1₂B1₂B2₈O₃₀. An initial investigation into the effect of the A1-cation size on the properties of empty Ba₄R₀.₆₇◻₁.₃₃Nb₁₀O₃₀ TTBs (where R is the A1-cation and R = La, Nd, Sm, Gd, Dy and Y; ◻ = vacancy) was performed. These were determined to be metrically tetragonal by powder x-ray diffraction, with decreasing R cation size inducing increased crystal anisotropy. This tetragonal structural distortion, driven by contraction in the ab-plane, is shown to st
APA, Harvard, Vancouver, ISO, and other styles
7

likitwattanasade, Teerarat. "The Changes in Food Coating Characteristics during Coating a Powder Mixture and Salting Potato Chips Nonelectrostatically and Electrostatically." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429538877.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nazou, M. "Defining the regional characteristics of Final Neolithic and Early Bronze Age pottery in Attica." Thesis, University College London (University of London), 2014. http://discovery.ucl.ac.uk/1431508/.

Full text
Abstract:
Situated between mainland and island-defined archaeological entities, Attica has traditionally been treated as a transitional borderland between what is perceived as ‘Helladic’ versus ‘Cycladic’ culture. Most discussions of social and cultural interactions in the southern Aegean have so far assumed a peripheral role for Attica during the Final Neolithic (41 00-31 00 BC) and the Early Bronze Age (3100- 2000 BC). This is mainly an accident of investigation, due to the lack of systematic research focusing on the stylistic character of FN-EBA material culture excavated at sites within this region.
APA, Harvard, Vancouver, ISO, and other styles
9

Lólos, Yannos G. "The late Helladic I pottery of the southwestern Peloponnesos and its local characteristics /." Göteborg : P. Åström, 1987. http://catalogue.bnf.fr/ark:/12148/cb389209645.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Segerstark, Andreas. "Laser Metal Deposition using Alloy 718 Powder : Influence of Process Parameters on Material Characteristics." Doctoral thesis, Högskolan Väst, Avdelningen för svetsteknologi (SV), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-11842.

Full text
Abstract:
Additive manufacturing (AM) is a general name used for manufacturing methods which have the capabilities of producing components directly from 3D computeraided design (CAD) data by adding material layer-by-layer until a final componentis achieved. Included here are powder bed technologies, laminated object manufacturing and deposition technologies. The latter technology is used in this study. Laser Metal Powder Deposition (LMPD) is an AM method which builds components by fusing metallic powder together with a metallic substrate, using a laser as energy source. The powder is supplied to the mel
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Characteristics of bronze powder"

1

Lo, Henry S. H. Casting characteristics of aluminium bronze. University of Birmingham, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Norton, Joseph D. Bronze powder: A study of the surface coating. The University, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mead, Margaret. And keep your powder dry: An anthropolgist looks at America. Ayer, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lafferty, Ian. The effect of crystallisation variables on the powder characteristics, mechanical properties and compression behaviour of dextrose. De Montfort University, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Baumann, E. D. Operational characteristics of a 200⁰C LC parallel resonant circuit. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cary, Lawrence E. Preliminary analysis for trends in selected water-quality characteristics, Powder River, Montana and Wyoming, water years 1952-85. Dept. of the Interior, U.S. Geological Survey, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

N, Hammoud Ahmad, and United States. National Aeronautics and Space Administration., eds. Operational characteristics of a 200b□-s□p0b□-s□sC LC parallel resonant circuit. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cary, Lawrence E. Trends in selected water-quality characteristics, Powder River and tributaries, Montana and Wyoming, water years 1968-88 and 1975-88. U.S. Dept. of the Interior, U.S. Geological Survey, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

E, Cary Lawrence. Trends in selected water-quality characteristics, Powder River and tributaries, Montana and Wyoming, water years 1968-88 and 1975-88. U.S. Dept. of the Interior, U.S. Geological Survey, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

E, Cary Lawrence. Trends in selected water-quality characteristics, Powder River and tributaries, Montana and Wyoming, water years 1968-88 and 1975-88. U.S. Dept. of the Interior, U.S. Geological Survey, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Characteristics of bronze powder"

1

Takei, Takashi. "Adsorption Characteristics." In Powder Technology Handbook. CRC Press, 2019. http://dx.doi.org/10.1201/b22268-26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rafaniello, William. "Critical Powder Characteristics." In Carbide, Nitride and Boride Materials Synthesis and Processing. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0071-4_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hidaka, Jusuke. "Vibrational and Acoustic Characteristics." In Powder Technology Handbook. CRC Press, 2019. http://dx.doi.org/10.1201/b22268-36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rietema, K. "Particle and Powder Characteristics." In The Dynamics of Fine Powders. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3672-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Arai, Yasuo. "Determination of powder characteristics." In Chemistry of Powder Production. Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1493-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Thümmler, F., R. Oberacker, I. Jenkins, and J. V. Wood. "Powder Properties and Characteristics." In An Introduction to Powder Metallurgy. CRC Press, 2024. https://doi.org/10.1201/9781003575788-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chi-Ying Wong, Anthony. "Fundamental Parameters of Powder Characteristics." In Powder Technology in Plastics Processing. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.1007/978-1-56990-870-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wong, Anthony Chi-Ying. "Fundamental Parameters of Powder Characteristics." In Powder Technology in Plastics Processing. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.3139/9781569908709.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zarzecka-Napierała, M., Mirosław M. Bućko, J. Brzezińska-Miecznik, and Krzysztof Haberko. "YAG Powder Synthesis and Characteristics." In Advances in Science and Technology. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-01-x.231.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ünal, Rahmi. "Effect of Cobalt to Bronze Ratio on Transverse Rupture Strength of Diamond Segments." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.1105.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Characteristics of bronze powder"

1

Cheng, Tzyy-Ping, Ju-Tung Lee, and Wen-Ta Tsai. "Galvanic Corrosion of Titanium-Coupled Aluminum Bronze and Its Cathodic Protection in Artificial Sea Water." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88394.

Full text
Abstract:
Abstract The condensers with titanium tubes are coming to the market and gradually replacing the all-copper-alloy condensers when sea water is used as coolant in the power plants. However, galvanic corrosion of the titanium-coupled Albronze occurs, occasionally, in the working environments. Concerning the prevention of this type of corrosion, cathodic protection by employing impressed current method, specifically, is frequently adopted. In this study, the characteristics of the galvanic corrosion of the titanium and Albronze couples in artificial sea water were investigated by using the follow
APA, Harvard, Vancouver, ISO, and other styles
2

Langill, Thomas J. "Powder Coating over Galvanized Steel." In Paint and Coatings Expo (PACE) 2010. SSPC, 2010. https://doi.org/10.5006/s2010-00027.

Full text
Abstract:
Abstract Powder coating over hot dip galvanized steel is an extremely effective corrosion protection system. However, careful surface preparation techniques need to be used to alleviate potential coating failures. The age and characteristics of the galvanized coating should be used to determine what type of surface preparation is needed.
APA, Harvard, Vancouver, ISO, and other styles
3

Tighe-Ford, D. J., P. Khambhaita, J. Buckley, and W. Paris. "Identification and Characteristics of a Ship Impressed Current Cathodic Protection System." In CORROSION 1994. NACE International, 1994. https://doi.org/10.5006/c1994-94498.

Full text
Abstract:
Abstract Potentiostatic ICCP is a closed loop Control system at the reference electrode (RE). A preliminary study of the identification of a ship system has been carried out employing a stylised, physical scale model of a hull fitted with an All-aft single-zone ICCP configuration in static electrolyte. Time responses at the RE after initial switch on were examined in relation to a step input to a Set Potential of -800 mV and further increments to -850 and -900 mV. The closed loop transfer function while the Set Potential was being established was found to be at least Second Order, with a low d
APA, Harvard, Vancouver, ISO, and other styles
4

Kushchev, Oleksiy, Oleksandr Umanskyi, Oleksandr Terentiev, et al. "Influence of additives of bronze powder Cu-10Al-4Fe on the tribological characteristics of coatings based on the Ni-C system." In IXth INTERNATIONAL SAMSONOV CONFERENCE “MATERIALS SCIENCE OF REFRACTORY COMPOUNDS”. Frantsevich Ukrainian Materials Research Society, 2024. http://dx.doi.org/10.62564/m4-ok3414.

Full text
Abstract:
Use of plasma coatings of nickel-clad graphite powder (Ni-C) is promising for use as abradable sealing materials [1, 2, 3]. To expand the areas of application of Ni-C powder coatings, it is advisable to use them in combination with bronze [4]. For this purpose, it is proposed to use bronze powder Cu-10Al-4Fe, which has proven itself well as an antifriction material. The purpose of this work was to study the influence of the amount of bronze additives Cu-10Al-4Fe on the tribological characteristics of coatings. Plasma coatings were applied in an open atmosphere on a UPU-3D installation in a pro
APA, Harvard, Vancouver, ISO, and other styles
5

Shin, S., C. Lee, K. T. Han, and H. J. Kim. "Effect of Process Parameters on the Deposition Characteristics of a Bronze-20 vol.% Diamond Composite in Kinetic Spraying." In ITSC2007, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2007. http://dx.doi.org/10.31399/asm.cp.itsc2007p0123.

Full text
Abstract:
Abstract The aim of this study was to ascertain the optimal process parameters that minimized compositional variation between the original powder mixture and composite coating. A bronze- 20 vol.% diamond composite powder was deposited by a kinetic spraying process with various feed rates, spraying distances and particle velocities. Experimental results showed that the diamond fraction, deposition efficiency and bond strength were dependent on process parameters, in particular, the particle velocity.
APA, Harvard, Vancouver, ISO, and other styles
6

Rajaei, Hossein, Alberto Molinari, Iñigo Agote, Miguel Ángel Lagos, Daniele Ferrari, and Marta Dai Pré. "Comparative Study Of FAST And Conventional Sintering Of Cutting Tool Material." In Euro Powder Metallurgy 2024 Congress & Exhibition. EPMA, 2024. http://dx.doi.org/10.59499/ep246281338.

Full text
Abstract:
This study explores the effectiveness of Field Assisted Sintering Technology (FAST) in producing cutting tools using a Bronze 90/10, Co, Fe, and W powder mix in granulated and non-granulated conditions. The goal is to evaluate and demonstrate FAST efficiency by comparing results obtained on the same system using a conventional sintering approach. For the characterization of the samples, a Rietveld refinement XRD patterns combined with microstructural analysis, based on SEM and EDXS, was considered. The study revealed that the sintering process significantly influenced microstructural character
APA, Harvard, Vancouver, ISO, and other styles
7

Yuki, Kohei, Naoki Horiguchi, Hiroyuki Yoshida, and Kazuhisa Yuki. "Droplet Evaporation Characteristics on High-Temperature Porous Surfaces for Cooling Fuel Debris." In 2024 31st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/icone31-135281.

Full text
Abstract:
Abstract Fuel debris at the Fukushima nuclear power station is typically cooled under immersion. However, significant drop in water level results in coolant contact with high-temperature, porous fuel debris. In such scenarios, rapid cooling is essential, yet the thermal behavior at the liquid-solid interface, including capillary phenomena, is not well understood. This paper presents basic research evaluating the evaporation characteristics of droplets upon contact with metallic porous media featuring small pores under 1 mm. We conducted experiments using bronze or stainless steel porous media
APA, Harvard, Vancouver, ISO, and other styles
8

Lomakin, Ivan A., Andrey A. Kholopov, Dmitrii O. Bogatyrev, and Igor N. Shiganov. "Characteristics of Polymetallic Structures Obtained by Direct Metal Deposition of Stainless Steel, Chromium Bronze and Lead for Antifriction Parts." In 2023 5th International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE). IEEE, 2023. http://dx.doi.org/10.1109/reepe57272.2023.10086737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Goryu, Akihiro, Mitsuaki Kato, Akira Kano, Satoshi Izumi, and Kenji Hirohata. "Evaluation Method for Mechanical Stress Dependence of the Electrical Characteristics of SiC MOSFET for Electro-Thermal-Structural Coupled Analysis." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72027.

Full text
Abstract:
Power semiconductor devices such as MOSFET/IGBT and PiN diodes are widely used as basic components for supporting infrastructure in the field of electronics, including in power conversion, industrial equipment, railways, and automobiles. Recently, increasing attention has been paid to silicon carbide (SiC) as a wide-band-gap semiconductor suitable for use in power devices with low loss and high breakdown voltage. However, basic knowledge of the material properties and reliability of SiC devices, and particularly the influence of mechanical stress on device characteristics, is still incomplete.
APA, Harvard, Vancouver, ISO, and other styles
10

Raghavendra, Sunil, Sasan Amirabdollahian, Matteo Perini, Marco Chemello, and Matteo Benedetti. "Enhancing Worm Gear Efficiency: Directed Energy Deposition of CuSn10 Alloy Onto Tooth Profiles." In Euro Powder Metallurgy 2024 Congress & Exhibition. EPMA, 2024. http://dx.doi.org/10.59499/ep246283629.

Full text
Abstract:
With the current development in additive manufacturing (AM) processes, such as Laser directed energy deposition (L-DED), efficient usage of raw materials is possible. With the aid of this L-DED process, we aim to develop an efficient way to reduce the use of bronze in worm gears. Our objective is to fabricate worm gears by applying CuSn10 (bronze) alloy onto a stainless steel tooth created through the L-PBF process. We assess the impact of laser power, feed rate, scanning speed, and scanning strategy on the deposition process. The deposited cross-sections undergo analysis for porosity, hardnes
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Characteristics of bronze powder"

1

Kakwani, R., and R. Kamo. Combustion characteristics of dry coal-powder-fueled adiabatic diesel engine: Final report. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/6265263.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Baldwin, Richard M. TA-97-4 Black Powder in the Gas Industry - Sources Characteristics and Treatment. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0011722.

Full text
Abstract:
The original objective of this research was to investigate means of controlling materials ingested into compressors in pipeline, refinery, gathering, and storage services. After an initial industry survey, it was determined that "Black Powder" (various forms of iron sulfide mixed with contaminants) is the least understood and most prominent contamination problem in pipelines and their compression equipment. The information documented in this report was gathered from technical literature, the Internet, researchers, experts, practitioners in the natural gas industry, field experience, and equipm
APA, Harvard, Vancouver, ISO, and other styles
3

Tiegs, T. N., F. C. Montgomery, J. L. Schroeder, D. L. Barker, and P. A. Menchhofer. Effect of powder characteristics on the {alpha}-TO-{beta} Si{sub 3}N{sub 4} transformation kinetics. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/463657.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baldwin, Richard. PR-015-084508-R01 Contaminants in Sales Gas Pipelines Sources Removal and Treatment. Pipeline Research Council International, Inc. (PRCI), 2010. http://dx.doi.org/10.55274/r0010029.

Full text
Abstract:
The objective of this project is to provide information about a problem material found in gas pipelines called "black powder". It is a mixture or a chemical compound of iron sulfides, iron oxides, dirt, sand, salts, chlorides, water, glycols, hydrocarbons and compressor oils, mill scale, or other materials. The most common constituents, iron compounds of sulfur or oxygen, are corrosion products. In addition to chemical formation, black powder can be formed by microbes normally found in gas pipelines. This material causes machinery, measurement, and pipeline maintenance problems. This research
APA, Harvard, Vancouver, ISO, and other styles
5

Law, Edward, Samuel Gan-Mor, Hazel Wetzstein, and Dan Eisikowitch. Electrostatic Processes Underlying Natural and Mechanized Transfer of Pollen. United States Department of Agriculture, 1998. http://dx.doi.org/10.32747/1998.7613035.bard.

Full text
Abstract:
The project objective was to more fully understand how the motion of pollen grains may be controlled by electrostatic forces, and to develop a reliable mechanized pollination system based upon sound electrostatic and aerodynamic principles. Theoretical and experimental analyses and computer simulation methods which investigated electrostatic aspects of natural pollen transfer by insects found that: a) actively flying honeybees accumulate ~ 23 pC average charge (93 pC max.) which elevates their bodies to ~ 47 V likely by triboelectrification, inducing ~ 10 fC of opposite charge onto nearby poll
APA, Harvard, Vancouver, ISO, and other styles
6

Preliminary analysis for trends in selected water-quality characteristics, Powder River, Montana and Wyoming, water years 1952-85. US Geological Survey, 1989. http://dx.doi.org/10.3133/wri894050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Trends in selected water-quality characteristics, Powder River and tributaries, Montana and Wyoming, water years 1968-88 and 1975-88. US Geological Survey, 1991. http://dx.doi.org/10.3133/wri914029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Characteristics of bronze powder' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography