Log in

Relevant bibliographies by topics / Charakteristické vlastnosti / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Charakteristické vlastnosti.

Dissertations / Theses on the topic 'Charakteristické vlastnosti'

Author: Grafiati

Published: 28 June 2021

Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Charakteristické vlastnosti.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Kvapil, Matěj. "Charakteristické vlastnosti spalování nízko-výhřevných paliv." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-316411.

Full text

Abstract:

The diploma thesis is focused on the combustion of the low calorific gaseous fuels. The first part is devoted to the characterization and usage of low calorific fuels. Then combustion theory focused mainly on emissions and thermodynamics. Next characterization of burners and their modifications for low calorific value fuels is described. Safe storage and handling of chosen gases is also included in the last chapter of the theoretical part. Practical part includes the description of the laboratory experiment, which was a part of this thesis. It consists of the experiment description, experiment

APA, Harvard, Vancouver, ISO, and other styles

2

Hudák, Igor. "Vliv inertních plynů na charakteristické parametry spalování." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-295650.

Full text

Abstract:

The dissertation thesis is focused on the investigation of the influence of inert gases on characteristic parameters of the combustion process. Inert gases are usually standard components of alternative gaseous fuels such as the producer gas, coal gas or biogas. For a long period some of the fuels were considered as waste gases and their potential was not sufficiently utilised. Compared with noble fuels such as natural gas, alternative fuels have different physical-chemical properties. For example, their lower heating value (LHV) can be lower even than 10 MJ/mN3. The composition of the alterna

APA, Harvard, Vancouver, ISO, and other styles

3

Štenclová, Kristýna. "Sledování vlivu úpravy vzorků na stanovení vybraných vlastností biopaliva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443202.

Full text

Abstract:

Diploma thesis is focused on the treatment of biofuel prior to combustion and effect of this treatment on the biofuel characteristics. The first part is a review of literature encompassing characteristics of fuel, preparation of samples, methods of analysis of individual characteristics and a presentation of various types of mills. The second part of thesis is experimental. It is an analysis of sample characteristics under various mill settings with regard to the temperature in the mill during grinding.

APA, Harvard, Vancouver, ISO, and other styles

4

Janošík, Petr. "Mechanické vlastnosti biokompozitů." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-258114.

Full text

Abstract:

Goal of this diploma thesis was to describe mechanical properties of epoxy resins containing organical fibers and to experimentally evaluate the effect of the fiber length with various concentrations on final mechanical property of composit material. First part of the diploma thesis is dedicated to literature review which describes general properties of fiber composites, materials which they are made of, and mechanical trials. In chapter called Methodics, materials used for experimental research are described. Process of sample preparation and mechanical trials, which were used for the test, a

APA, Harvard, Vancouver, ISO, and other styles

5

Kulíková, Barbora. "Sledování vlivu teploty na vlastnosti lithium-iontové baterie." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399541.

Full text

Abstract:

This Master’s thesis deals with a monitoring of the temperature influence on Li-ion batteries, literature search of this topic and proposal of experiments. First chapter contains the theory of evolution and fundamentals of the Li-ion batteries. Planned experiments with flow charts and block diagrams are described in the second chapter. The work station is explained along with a description of the execution of the experiments in the third chapter. The experiments are analyzed and results explained in the last chapter.

APA, Harvard, Vancouver, ISO, and other styles

6

Chmelař, Zdeněk. "Vliv podvozku na tahové vlastnosti traktorů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231709.

Full text

Abstract:

In this master thesis is analyzed the current situation in the construction chassis of tractors, in addition, a methodology for evaluating the impact of influences on drawbar properties of tractors. The main objective of this work was to analyze and conclude the measured drawbar properties of selected tractor same power and weight categories with different chassis designs. Measured and calculated values were tabular and graphically presented. When evaluating the drawbar properties were determined according tractive power and slip depending on the drawbar forces.

APA, Harvard, Vancouver, ISO, and other styles

7

Florián, Pavel. "Elektrické a dielektrické vlastnosti organických materiálů pro fotovoltaické aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2014. http://www.nusl.cz/ntk/nusl-217037.

Full text

Abstract:

Diploma thesis deals with the use of organic materials in photovoltaic applications and the study of their electric and dielectric properties. The theoretical part of thesis deals issue of the use of organic polymeric materials in photovoltaics and their advantages and disadvantages. Next are the results of various studies of organic solar cells by other authors. In the practical part of the work are shown experimental results (volt-ampere characteristics and impedance spectra) of samples of organic semiconductors and their evaluation.

APA, Harvard, Vancouver, ISO, and other styles

8

Martinů, Michaela. "Studium vlastností různých rostlinných olejů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2008. http://www.nusl.cz/ntk/nusl-216392.

Full text

Abstract:

The aim of the diploma thesis was determined the particular fatty characteristics of various vegetable oils in dependence on their storage life and storage conditions. Storage conditions were defined by room temperature and coolroom temperature. The fourteen oils were used for analyses, namely linseed oils, castor oil, grape seed oil, almond oil, olive oil, jojoba oil, avocado oil, apricot kernel oil, corn oil, rice bran oil, macadamia nut oil, soya bean oil, pumpkin seed oil and sunflower oil. All tested oils were supplied by firm M+H, Míča a Harašta s.r.o. The fatty characteristics included

APA, Harvard, Vancouver, ISO, and other styles

9

Wolf, Jiří. "Měření vlastností ultrazvukového zobrazovacího systému." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217227.

Full text

Abstract:

This diploma thesis deals with the displaying process evaluation from the resolution capabilities of the ultra-sonic probe point of view. As a part of the thesis a method for measuring the response from point spread function (PSF) and method for measuring the response from linear spread function LSF were designed. Collected data were processed in the Matlab environment. Basic evaluation parameters of the space resolution capabilities were set and used – axial, lateral and traversal resolution.

APA, Harvard, Vancouver, ISO, and other styles

10

Nováková, Tereza. "Elektrické vlastnosti nanostrukturovaných povrchů TaxOy pro kapacitní aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318191.

Full text

Abstract:

Cílem diplomové práce bylo nastudovat a popsat mechanismy transportu náboje v tantalovém kondenzátoru. Práce obsahuje stručný teoretický úvod do problematiky kondenzátoru jako součástky a dále se zabývá jednotlivými mechanismy přenosu náboje jako je ohmická, Poole-Frenkel proudová, Schottkyho, tunelovací a emisní složka a také proudem prostorového náboje. V experimentální části byly měřeny ampér-voltové I/V, ampér-časové I/t a impedanční charakteristiky, jejichž data byla následně zpracována pomocí např. Mott-Schottkyho analýzy a byly vyhodnoceny elektrické parametry jako je aktivační energie,

APA, Harvard, Vancouver, ISO, and other styles

11

Boháč, Vlastislav. "Analýza rizik možností posuzování charakteristických hodnot vlastností stavebních materiálů." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-233173.

Full text

Abstract:

The thesis is concerned with summarization of steps to determine of the characteristic values of building materials which are listed in European and Czech standards number 72 - Building raw materials, materials and products and number 73 - Design and construction of buildings. The aim of thesis is to describe differences and perform analysis of individual processes and propose the solution of these problems.

APA, Harvard, Vancouver, ISO, and other styles

12

Tumová, Šárka. "Vliv fotochromního aditiva na optické a elektrické vlastnosti polymerních matric." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2017. http://www.nusl.cz/ntk/nusl-316197.

Full text

Abstract:

This thesis is focused on the photochromic molecule of spiropyran, which changes its structure as well as physical and chemical properties after UV irradiation. These changes are reversible, the molecule thermally restore its initial structure. For the study, the molecule SP1 with the systematic name 1',3'-dihydro-1',3',3'-trimethyl-6-nitrospiro[2H-1-benzopyran-2,2'-(2H)-indole] was used. This molecule was incorporated within polymers PVK, Tg PPV, PCBTDPP and PCDTBT and the method of UV-VIS spectroscopy was used to observe the photochromic activity within these matrices. The influence of matri

APA, Harvard, Vancouver, ISO, and other styles

13

Vohlídal, Jiří. "Klasické a nově navržené popisné charakteristiky: porovnání výběrových vlastností na základě Monte Carlo simulace." Doctoral thesis, Vysoká škola ekonomická v Praze, 2007. http://www.nusl.cz/ntk/nusl-1727.

Full text

Abstract:

Na základě Monte Carlo simulace bylo provedeno porovnání estimátorů klasických a některých nově navržených měr variability, relativní variability, šikmosti a kurtozy. Z celkem 40 různých populací bylo pořízeno vždy 16 000 výběrů o rozsahu n = {7; 15; 23; 31; 47; 63; 100; 200; 350; 500; 1000}. Z každého výběru byly vypočteny hodnoty estimátorů měr založených na momentech, kvantilech, L momentech a jejich modifikacích a robustních měr založených na mediánu funkce lineární kombinace pořádkových statistik. Na základě experimentu bylo provedeno porovnání výběrových vlastností jednotlivých estimátor

APA, Harvard, Vancouver, ISO, and other styles

14

Výskala, Miloslav. "Modelování a simulace projektů zlepšujících tepelně-technické vlastnosti budov." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-234556.

Full text

Abstract:

This doctoral thesis deals with the modelling of projects improving the thermal technical characteristics of buildings. The solution of this problem seems to be finding at least one cost-effective option. The basic method of evaluation of cost-effectiveness is represented by the compilation of all corresponding cash flows and their rendering in time through discounting. The aim of the docáral thesis is the processing and modeling of individual investment options related with improve the thermal-technical properties of buildings and finding a cost-optimal variants, ideally. One of the expected

APA, Harvard, Vancouver, ISO, and other styles

15

Hradil, David. "Mechanicko strukturní charakteristiky materiálů vyrobených metodou SLM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254320.

Full text

Abstract:

The master's diploma thesis deals with the mechanical and structural characteristics of aluminium-base alloy 2000 series, produced by selective laser melting (SLM). The experimental part of the thesis deal with selection of SLM processing parameters, influence of scanning strategy and evaluation of mechanical and structural characteristics of fabricated materials. Mechanical characteristics were evaluated based on results of tensile tests and microhardness measurement. Structural characteristics of materials produced by SLM were evaluated using metallographic analysis.

APA, Harvard, Vancouver, ISO, and other styles

16

Pacut, Patrik. "Konstrukce zařízení pro měření charakteristik pneumatiky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241865.

Full text

Abstract:

The aim of this thesis is a method selection and design of measuring device for experimental identification of directional tire characteristics for passenger cars. The first part analyse directional characteristic and method of measurement. The next part focuses on the design of the measuring trailer and selecting measuring equipment with description.

APA, Harvard, Vancouver, ISO, and other styles

17

Lazorka, Martin. "Vyhodnocení vlastností vzdušných iontů vytvářených různými zdroji iontů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220236.

Full text

Abstract:

The work is focused on the composition of the atmosphere, the processes that take place in it, especially on the formation of atmospheric ions and the energy that must be supplied to ionize the gas. The work examines the influence of aerosol particles on the concentration of ions and also how air ions influence the human health. Last but not least, there is mentioned a comparison of the possibilities of artificial air ionization for interiors.

APA, Harvard, Vancouver, ISO, and other styles

18

Mlčkovová, Hana. "Studium dielektrických vlastností krystalů perovskitů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-445134.

Full text

Abstract:

The presented diploma thesis deals with the preparation of perovskite single crystals by inverse thermal crystallization and subsequent study of the basic properties of these hybrid organic-inorganic materials that can be used in various optoelectronic (photodetectors, transistors, lasers, LEDs) or photovoltaic applications. Their behavior in the electric field was studied by impedance spectroscopy. Impedance and capacitance-voltage (C-V) characteristics (frequency dependences) were measured in the dark and in the light. From the impedance dependences for measurements at 0 V voltage in the dar

APA, Harvard, Vancouver, ISO, and other styles

19

Hangya, Josef. "Účinky elektrického namáhání na vlastnosti elektroizolačních materiálů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220958.

Full text

Abstract:

Diploma thesis treat of effect of direct, alternate and pulse electrical stress on the properties surveyed electrical insulating material. Object of this experiment is crystalline high-density polystyrene QUINN PS. To monitor the stress is used the method of dielectric relaxation spectroscopy. Under examinations are the resultant dielectric spectra, which constitute the frequency dependencies of components of complex permitivity. Samples of the selected material are exposed to effects of alternate and pulse electrical stress on the different intensities of the electric field. In the direct fie

APA, Harvard, Vancouver, ISO, and other styles

20

Mitáčková, Martina. "Studium vlastností tranzistorů s iontovými kapalinami." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-449404.

Full text

Abstract:

This diploma thesis is focused on the study of electric and dielectric properties of transistors based on ionic liquids. The measurements were performed on organic electrochemical transistors with a semiconducting channel made of PEDOT:PSS, which were firstly prepared on ITO substrates, later they were printed using 3D print. Ionic liquid NO4 (1-butyl-3-methylimidazolium hydrogensulfate) was used for measuring of the properties. Electrical properties were determined by measuring volt-ampere characteristics, dielectric properties were measured by impedance spectroscopy.

APA, Harvard, Vancouver, ISO, and other styles

21

Kalábová, Barbora. "Porovnání jízdních vlastností vozidel." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-232736.

Full text

Abstract:

This thesis deals with the analysis of the car driving characteristics depending on the type of drive wheels. The first chapter defines the basic theoretical cars concept as well as procedures for determining the individual variables needed to identify the driving dynamics of vehicles. The practical part describes the plan and the progress of realized measurements on a selected pattern of vehicles, and the measured values are interpreted. The final part deals with the evaluation of the performed measurements and the data identified within these measurements.

APA, Harvard, Vancouver, ISO, and other styles

22

Buřič, Milan. "Porovnání metod měření tahové síly traktoru při zpracování půdy." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-258985.

Full text

Abstract:

The theoretical part of the diploma thesis deals with soil qualities which influence the soil processing. The soil processing itself is described in the theoretical part as well as advantages and disadvantages of the specific processing, a choice of technology for effective soil processing and economic aspects of the processing. In this part there is an extract describing a test of a tractor pulling and reasons for making the test of pulling in laboratory and field conditions. The practical part of the thesis deals compares two methods of a tractor pulling power during field tests. A belt trac

APA, Harvard, Vancouver, ISO, and other styles

23

Pospíšil, Jan. "Studium dielektrických vlastností struktur tenkých vrstev organických materiálů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta chemická, 2016. http://www.nusl.cz/ntk/nusl-261290.

Full text

Abstract:

The dissertation is focused on the study of electric and especially dielectric properties of thin film organic materials with their huge potential for optoelectronics and other industrial sectors. The theoretical part deals with the use of organic materials in organic photovoltaic cells, the methods of deposition techniques and characterization. The theoretical knowledge of the dielectric spectroscopy, including methods for determining the physical properties and evaluation of experimental data are also described. The experimental part is devoted to the study of small molecule organic solar ce

APA, Harvard, Vancouver, ISO, and other styles

24

Maráčková, Lucie. "Studium elektrických a dielektrických vlastností plynových senzorů na bázi iontových kapalin." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2017. http://www.nusl.cz/ntk/nusl-316154.

Full text

Abstract:

This diploma´s thesis is focused on a study of electrical and dielectric properties of gas sensors based on ionic liquids. Measurements were done on two different types of OECT substrates (0099 and 0160). Three ionic liquids and physiological solution PBS were chosen as electrolytes. Direct current current-voltage characteristic was measured. Switching rations of transistors with this electrolyte were determined by current-voltage characteristic. Alternating resistivity dependence on frequency were measured as well. Better properties showed OECT 0099 substrates.

APA, Harvard, Vancouver, ISO, and other styles

25

Pokorný, Marek. "Charakterizace vlastností fotovoltaického systému." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219073.

Full text

Abstract:

The aim of this work is informed first about photovoltaics universally, works to inform the photovoltaic panels and complete plants. The work also includes instructions on how to implement PVP in accordance with law. Another part is the rough draft of the photovoltaic power 30 kWp, which can be placed on the house, computation and calculation of investment and them profitable investments to time. Design is made in two separate forms of the Fronius Solar and Sunny Design, their outputs are compared. The practical part of this work cooperates with the company SOLARTEC Ltd. for experimental measu

APA, Harvard, Vancouver, ISO, and other styles

26

Pospíšil, Jan. "Studium optoelektrických vlastností tenkých vrstev organických polovodičů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2012. http://www.nusl.cz/ntk/nusl-216901.

Full text

Abstract:

The thesis is focused on the study of electric and dielectric properties of thin film organic materials that can be used as an active layer of photovoltaic cells. Primarily were studied the properties of the layers on the glass substrates, which consist of a thin active layer of phthalocyanines. On the samples were first measured current-voltage characteristics (in the dark and during the exposure) and the basic parameters of the photovoltaic conversion were determined. Finally were measured frequency dependencies (impedance spectra, in the dark and during the exposure) and the parameters of a

APA, Harvard, Vancouver, ISO, and other styles

27

Nespěšný, Ondřej. "Rozbor vlastností materiálu kompozitních desek na bázi cementu a organických vláken v návaznosti na jeho využití v rámci návrhu interiérových schodišť." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410061.

Full text

Abstract:

Cement-based composite boards reinforced by organic fiber, commonly known as cement fiber boards are universal and environmental material. Nowadays they are commonly used in construction industry in the form of facade facing for ventilated facades, interior and exterior ceilings or as a lost formwork for the bridge constructions. In these ways of using the cement fiber boards are strained mainly perpendicularly to their median plane. Material characteristics for this kind of strain are declared by the manufacturers. This diploma thesis is focused on ways of using the cement fiber boards reinfo

APA, Harvard, Vancouver, ISO, and other styles

28

Cäsar, Tomáš. "Návrh a analýza vlastností hydraulického servomechanismu řízení malého a rychlého letounu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319273.

Full text

Abstract:

Target of this thesis was to design servo-mechanism suitable for control system of small and speedy aircraft, such as business jets and light multi-purpose attack aircraft. Main task was to use suggested characteristics for computer analysis and determine impact of their changes on servo-mechanism properties. Further on, experimental way of determining these parameters.

APA, Harvard, Vancouver, ISO, and other styles

29

Svobodová, Ivana. "Elektrodepozice tenkých tantalových vrstev z iontových roztoků a měření jejich elektrických vlastností." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242057.

Full text

Abstract:

The thesis is focused on the electrodeposition of tantalum from ionic solution 1-butyl-1- methylpyrrolidinium bis(trifluoromethylsulfonyl) imide, ([BMP]Tf2N) at 200°C and description of related transfer and kinetic phenomena on the interface between the ionic solution and working electrode. Furthermore, the electrodeposition of tantalum layers in different ionic solutions containing tantalum salts and especially in ([BMP]Tf2N) is introduced. In the last part of the thesis, results of cyclic voltammetry, surface analysis SEM and elemental analysis EDX are discussed. MIS (metal-insulator-semicon

APA, Harvard, Vancouver, ISO, and other styles

30

Sháněl, Ondřej. "Vývoj a aplikace metod zařízení pro studium lokálních vlastností nanostruktur." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227949.

Full text

Abstract:

Vývoj UHV kompatibilního kombinovaného systému AFM/SEM. Modifikace předchozího AFM mikroskopu pro podmínky spojené s tímto systémem. Výzkum transportu elektrického náboje v organických solárních článcích pomocí měření jejich volt-ampérových charakteristik a povrchového potenciálu. Příprava zlatých hrotů pro STM netoxickou cestou.

APA, Harvard, Vancouver, ISO, and other styles

31

Florián, Pavel. "Studium elektrických a dielektrických vlastností alkalicky aktivovaných aluminosilikátů se zvýšenou elektrickou vodivostí." Doctoral thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-393991.

Full text

Abstract:

This dissertation deals with the study of electric and dielectric properties of composite structures on the base of alkali-activated aluminosilicates with admixtures of various carbon particles. These materials fabricated from alkali-activated blast furnace slag, quarz sand, natrium water glass as alkali activator, water, dispersant and small amount of carbon admixture (carbon black, graphite powder, carbon fibers or carbon nanotubes) to increase electric conductivity may be used for example to construction of snow-melting, deicing and self-monitoring systems. Their current-voltage characteris

APA, Harvard, Vancouver, ISO, and other styles

32

Gavranović, Stevan. "Monokrystaly perovskitů pro detekci elektromagnetického záření." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-445139.

Full text

Abstract:

This thesis is focused on the study of the detection of electromagnetic radiation using monocrystalline perovskites. Theoretical part deals with basic principles of detections and possible applications of hybrid perovskite crystals in the field of ultraviolet and visible spectrum detection. Parameters of the recently published perovskite photodetectors are also presented. Experimental part describes synthesis, structural and optical properties of MAPbBr3 single crystals and electrical characterization of the Au/MAPbBr3/Au photodetector. Photodetector parameters (responsivity, external quantum

APA, Harvard, Vancouver, ISO, and other styles

33

Miklíková, Zdeňka. "Studium optoelektrických vlastností tenkých vrstev organických polovodičů na bázi ftalocyaninů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2015. http://www.nusl.cz/ntk/nusl-217103.

Full text

Abstract:

Diploma thesis is focused on the study of optoelectric properties of thin layers of organic materials based on phthalocyanines, which can be used as an active layer of photovoltaic cells. Especially are studied the properties of the thin active layers of PdPc and PdPc + IL on the glass or ceramic substrates with aluminium contact, which are prepared by material printing here. On the prepared samples were first measured current-voltage characteristics in the dark and in the light and then were measured impedance spectrums in the dark. The received results will be used to improve the properties

APA, Harvard, Vancouver, ISO, and other styles

34

Špičák, Pavel. "Technologie výroby součástí z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229768.

Full text

Abstract:

The project developed in terms of engineering study of field N2307- 00 Engineering Technology submits a design of components from plastic production technology- cover on the table. The introductory part of this study describes characteristics, division and possible plastics processing. The work consists of production technology proposal (injection into metal mold) and its construction solution. The another part proposes suitable injection material and verification of injection machine. The final part of work consists of financial evaluation of injection process, appropriate blue prints and app

APA, Harvard, Vancouver, ISO, and other styles

35

Krůza, Libor. "Konstrukce zařízení na měření směrové tuhosti pneumatik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229481.

Full text

Abstract:

This thesis describes the design of devices that will measure the directional characteristics of the tires. The first step is to analyze the directional characteristics and methods of measurement. The following equipment design, which should be designed to function while it was cheapest. The device is designed as a trailer towing vehicle. It also includes analysis of individual plant components important to measure those variables.

APA, Harvard, Vancouver, ISO, and other styles

36

Nevřalová, Jana. "Posouzení stability skalní stěny a návrh sanačních opatření." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227708.

Full text

Abstract:

The work aims to evaluate rock slope including static assessment and to estimate the financial cost. Static analysis is done manually and the program GEO 5. The proposal remediation is performed in 6 combinations of which one is selected and processed into project documentation.

APA, Harvard, Vancouver, ISO, and other styles

37

Hruška, Lukáš. "Asfaltocementový beton." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225561.

Full text

Abstract:

Aim of this thesis is the usage of the open-graded asphalt concrete filled with a special cement grout in the road structures. Thesis defines the main concrete properties and explains related legislation and norms that apply. In addition, laboratory design of asfalt mixtures and a tree kind mortal filler and possibilities of mortal filler pigmentation are dealth with. Finally, thesis evaluates the results from various laboratory tests that were performed on the specimens made from final mixtures.

APA, Harvard, Vancouver, ISO, and other styles

38

Pěch, Pavel. "Použití speciálních pojiv při recyklaci asfaltových směsí na obalovně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226937.

Full text

Abstract:

The thesis deals with the matter of usage of special asphalt binders for production of asphalt mixtures containing recycled materials in asphalt plant. For comparison analysis of characteristics of special binder used in roads is necessary to compose different mixtures of asphalt – one with binder containing R-materials, and another benchmark mixture with binder used in common mixtures without recycled materials. Investigation of features of mixtures with different binders is carried out by selected performance tests of asphalt mixtures. Evaluation and comparison of the results is described in

APA, Harvard, Vancouver, ISO, and other styles

39

Papežíková, Hana. "Potenciál využití semi-interpenetrovaných polymerních sítí na bázi poly-HEMA v moderních nosičových systémech." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-449370.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Hloušková, Veronika. "Charakteristika vybraných půdních vlastností ŠS Smržice." Master's thesis, 2008. http://www.nusl.cz/ntk/nusl-95075.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Chládková, Lenka. "Druhová a typová charakteristika biologických vlastností půdy." Master's thesis, 2010. http://www.nusl.cz/ntk/nusl-87610.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

KYRYANOVÁ, Alena. "Charakteristika reprodukčních vlastností hřebců působících v inseminaci." Master's thesis, 2016. http://www.nusl.cz/ntk/nusl-251905.

Full text

Abstract:

One of the requirements for a successful insemination in horse breeding is the selection of quality stallions which produced ejaculate in enough quantities and of good quality. For this purpose were discovered methods of dealing with the evaluation of semen quality. In this dissertation was ejaculate evaluated by using an objective computerized method CASA, system SCA. Monitoring the quality of sperm was performed on 11 breeding stallions involved in artificial insemination fresh sperm in ZH Písek. 53 samples of ejaculate were evaluated. Volume, sperm concentration, total and progressive motil

APA, Harvard, Vancouver, ISO, and other styles

43

Chalupa, Oldřich. "Vliv pneumatik na tahové vlastnosti traktorů." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-169482.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Kavalec, Miloš. "Agronomická charakteristika vybraných půdních vlastností hospodářského podniku Březejc." Master's thesis, 2010. http://www.nusl.cz/ntk/nusl-87678.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Šálková, Vendula. "Stavebně technické charakteristiky dvojitých oken." Master's thesis, 2019. http://www.nusl.cz/ntk/nusl-428628.

Full text

Abstract:

This thesis deals with comparison of properties of double windows with different construction. There are mechanical and theremal properties, air permeability, resistence to wind loads, watertightness and heat transmission.

APA, Harvard, Vancouver, ISO, and other styles

46

Jakeš, Ondřej. "Vliv doby a teploty paření na pružnostní a pevnostní charakteristiky dřeva buku." Master's thesis, 2019. http://www.nusl.cz/ntk/nusl-428418.

Full text

Abstract:

This diploma thesis primarily focuses on thermal modification of wood with superheated steam and its effect on elasticity and strength. The sample tested was 200 pcs of bending samples and 200 pcs compressive samples of European beech. These samples were divided into ten groups. One group was referential and the remaining nine groups were modified using different temperatures and during different time intervals. The main goal was to determine density, modulus of elasticity and rupture and to discover their dependence on the chosen mode of modification. The next part contains the analysis of th

APA, Harvard, Vancouver, ISO, and other styles

47

Tomanová, Ladislava. "Sloupcové tvary jabloní, jejich charakteristika a praktické možnosti využití." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-424839.

Full text

Abstract:

Valorization of the growth, harvesting and qualitative characteristics of apple tree varieties which are characterized by columnar growth pattern at ŠZP Žabčice. Focusing on the incidence of fungal diseases (apple scab, apple powdery mildew). Review of literature focusing on the characteristics of growth properties, harvesting data including the quality of fruits and their keeping.

APA, Harvard, Vancouver, ISO, and other styles

48

JINDRÁKOVÁ, Monika. "Vliv různých způsobů využívání travního porostu na porostové charakteristiky a vybrané půdní vlastnosti." Master's thesis, 2014. http://www.nusl.cz/ntk/nusl-181007.

Full text

Abstract:

This thesis was focused on evaluate the effect of various permanent grassland exploitation on the biological characteristics and soil properties. Permanent grasslands are composite and varied community of legumes, grasses and many other forbs, which are an important component of agroecosystem. This thesis was carried out in 2013 on experimental grass field trial on Faculty of Agriculture, University of South Bohemia in the ČeskéBudějovice. The experimental variants was evaluated the effect of management by mowing, mulching, leaving fallow.Otherwise were also evaluated height stands,phenophases

APA, Harvard, Vancouver, ISO, and other styles

49

Brynza, Mykola. "Elektrické a optické vlastnosti SiC monokrystalů." Master's thesis, 2020. http://www.nusl.cz/ntk/nusl-435009.

Full text

Abstract:

Silicon carbide is a semiconductor with a wide bandgap of up to 3.2 eV and is capable of operating in extreme conditions, high temperature and high energy modes. This work focuses on the investigation of electrical and optical properties of monocrystalline SiC by various methods including Raman spectroscopy, volt-ampere characteristics, L-TCT and spectroscopic techniques. The adhesion of contacts and the influence of different contact materials on the ability to detect ionizing radiation are also studied to optimize the technology of preparation of quality SiC-based radiation detectors.

APA, Harvard, Vancouver, ISO, and other styles

50

Slavík, Martin. "Vlhkostní charakteristiky přirozených pískovcových výchozů." Doctoral thesis, 2019. http://www.nusl.cz/ntk/nusl-398168.

Full text

Abstract:

Moisture in a sandstone body plays a notable role in hydrological, weathering, biological and other processes. Knowledge about presence and movement of moisture within porous medium of natural sandstone exposures is, however, rather limited. Aim of the doctoral thesis was thus to quantify selected moisture characteristics of several natural sandstone exposures in Český ráj (Czech Republic). According to long-term logging, mean annual temperature at studied areas was between 8.5 řC to 11.5 řC, mean annual relative humidity was between 73 % to 85 %. Deforested area was found warmer and drier and

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!