Relevant bibliographies by topics / Charts, diagraxms

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Charts, diagraxms'

Author: Grafiati
Published: 26 July 2024
Last updated: 29 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Charts, diagraxms.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Charts, diagraxms"

1

Mutakin, Akmal Athallah, and Nur Azizah komara Rifai. "Diagram Kendali Decision On Belief (DOB) dan Diagram Kendali Progressive Mean (PM) dalam Pengendalian Kualitas Produksi Kayu Lapis di PT. XYZ." Bandung Conference Series: Statistics 3, no. 2 (July 29, 2023): 176–83. http://dx.doi.org/10.29313/bcss.v3i2.7791.

Full text
Abstract:
Abstract. The rapid development of Science and Technology (IPTEK) in the digital age has caused competition in several sectors of the economy to increase, this makes companies required to produce quality products. In a production, the quality of a product needs to be controlled so that it always meets the targets set by the company. Statistical quality control is needed to detect as early as possible any problems in a production. Control charts are often used to control statistical quality control in a production process. Variable control diagrams are usually used when the quality characteristics can be measured using the same unit, which is different from the variable control charts, attribute control charts are usually used when the data is in the form of proportions. Several statistical quality control chart methods used to control product quality are the Decision On Belief (DOB), Cumulative SUM (CUSUM), Exponentially Weighted Moving Average (EWMA) and Progressive Mean (PM) control chart methods. In this study, we will look at the performance comparison of the Decision On Belief (DOB) control chart with the Progressive Mean (PM) control chart applied to defective product data on plywood production at PT. XYZ in September 2021. After comparing the two control charts, it is concluded that the Decision On Belief (DOB) control chart is a control chart that is better and faster in detecting data that is out of control or is in an out of control state. Abstrak. Semakin pesatnya perkembangan Ilmu dan Teknologi (IPTEK) di era digital, menyebabkan persaingan di beberapa sektor perekonomian mengalami kenaikan, hal tersebut membuat perusahaan dituntut untuk menghasilkan produk yang berkualitas. Dalam suatu produksi, kualitas dari suatu produk perlu dikendalikan agar selalu sesuai dengan target yang telah ditetapkan oleh perusahaan. Pengendalian kualitas statistik sangat diperlukan guna mendeteksi sedini mungkin adanya permasalahan dari suatu produksi. Diagram kendali sering digunakan untuk mengontrol pengendalian kualitas statistika dalam suatu proses produksi. Diagram kendali variabel biasa digunakan apabila karakteristik kualitasnya dapat diukur menggunakan satuan yang sama berbeda dengan diagram kendali variabel, diagram kendali atribut biasa digunakan apabila datanya berbentuk proporsi. Beberapa metode diagram pengendali kualitas statistik yang digunakan dalam mengontrol kualitas produk adalah metode diagram kendali Decision On Belief (DOB), Cumulative SUM (CUSUM), Exponentially Weighted Moving Average (EWMA) dan diagram kendali Progressive Mean (PM). Pada penelitian ini akan dilihat perbandingan performa dari diagram kendali Decision On Belief (DOB) dengan diagram kendali Progressive Mean (PM) yang diterapkan pada data produk cacat produksi kayu lapis di PT. XYZ bulan September 2021. Setelah membandingkan kedua diagram kendali tersebut diperoleh kesimpulan bahwa diagram kendali Decision On Belief (DOB) merupakan diagram kendali yang lebih baik dan lebih cepat dalam mendeteksi adanya data yang tidak terkendali atau berada dalam keadaan out of control.
APA, Harvard, Vancouver, ISO, and other styles
2

Pujiana, Dwi Harti, Mustafid Mustafid, and Di Asih I. Maruddani. "DIAGRAM KONTROL MULTIVARIAT np DAN DIAGRAM KONTROL JARAK CHI-SQUARE DALAM PENGENDALIAN KUALITAS PRODUK KAIN DENIM (Studi Kasus di PT Apac Inti Corpora)." Jurnal Gaussian 7, no. 4 (November 30, 2018): 385–96. http://dx.doi.org/10.14710/j.gauss.v7i4.28866.

Full text
Abstract:
Denim fabric sort number 78032 is one type of fabric in the last 4 years almost every month produced by PT Apac Inti Corpora. In the continuity of denim fabric production process, there are data defects (non-conformity) that causes the quality of denim fabric decreases. To maintain the consistency of the quality of products produced in accordance with the specified specifications, it is necessary to control the quality of the production process that has been running for this. Multivariate control charts attributes used are multivariate control charts np using the number of samples and the proportion of disability data with correlation between variables while the chi-square distance control charts use squared distances with uncorrelated data between variables. The results showed that in the multivariate control chart np there were 2 out-of-control observations in the phase II data using control limits from phase I data already controlled by the value of BKA of 636321.4. While in the chi-square distance control chart showed all observations are in in-control condition with BKA value of 0.06536. Controlled production process obtained multivariate process capability value for multivariate control np diagram of 0.625142 <1 which means the process is not capable, while the value of process capability in the chi-square distance control chart is 1.1329> 1 which means the process is capable. Keywords: denim fabric, multivariate np control chart, chi-square distance control chart, multivariate process capability
APA, Harvard, Vancouver, ISO, and other styles
3

Ilmi, Nurul, Amelia Anggi Syafitri, and Sadiq Ardo Wibowo. "Analisis Pengendalian Kualitas pada Proses Assembly Dengan Menggunakan Metode Statistical Process Control (SPC) di PT XXX Batam." Journal of Industrial Innovation and Safety Engineering (JINSENG) 1, no. 2 (July 18, 2023): 73–82. http://dx.doi.org/10.35718/jinseng.v1i2.871.

Full text
Abstract:
PT XXX Batam adalah suatu perusahaan jasa yang bergerak pada bidang wire harness dan assembly elektronik. Dalam kegiatan produksinya, ditemukan masalah yang berhubungan dengan kualitas produk. Proses perakitan dalam aktivitasnya selalu mengalami kecacatan produk yang sulit untuk diidentifikasi. Metode Statistical Process Control digunakan untuk menganalisa serta mengidentifikasi dari permasalahan yang diteliti. Metode ini sangat membantu dalam mendapatkan informasi, dapat diketahui jika hasil dari identifikasi dari sebuah masalah sangat berpengaruh terhadap proses produksi, maka dapat segera melakukan perbaikan dengan melihat data yang ada sebagai bahan pengukuran untuk kedepannya. Teknik pengendalian kualitas ini dibantu dengan 7 alat yaitu check sheet, pareto charts, histogram, cause and effect diagrams, scatter diagrams, flow diagram, dan control chart. Dari hasil analisis yang didapat dari peta kendali menunjukkan bahwa proses berada dalam keadaan terkendali. Hasil yang telah didapatkan melalui diagram pareto, dapat diketahui bahwa tindakan yang harus lebih banyak perbaikannya yaitu pada hontai patah (28%) dan hontai tergores (27%).
APA, Harvard, Vancouver, ISO, and other styles
4

Chie, Ho Hwi, Januar Nasution, Ketut Gita Ayu, Nike Septivani, and Yualfin Renaldi. "Porcelain Product Quality Analysis in PT XYZ." ComTech: Computer, Mathematics and Engineering Applications 6, no. 4 (December 1, 2015): 580. http://dx.doi.org/10.21512/comtech.v6i4.2195.

Full text
Abstract:
PT. XYZ is a company engaged in manufacturing porcelain dinner ware such as plates, cups, teapot, bowl, etc Porcelain product is safe for use and product defect will only affect the aesthetic not the functional side. The company always maintain the quality of the products produced as by maintaining a good product, in terms of visuals, will keep customers interested in the product. Good quality products characterized by quality A / B and C, and the product defect characterized by the quality of D, Lost, and BU. Concepts and methods used to analyze is a statistical process control (SPC) which includes Pareto diagram, fraction nonconformities, flow charts and fishbone diagrams and management tools (fault tree analysis). Statistical Process Control (SPC) is one of the methods, which includes Pareto charts, fraction nonconformities, flow chart, and fishbone diagram and also management tools (fault tree analysis). SPC is useful to find the facts from the problems and factors that affect the quality of the products, while fault tree analysis is useful to analyze each of the production process.
APA, Harvard, Vancouver, ISO, and other styles
5

Salma, Jihan, and Resi Juariah Susanto. "The Quality Control Analysis Using Statistical Quality Control (SQC) Methods in Reducing Defective Muslim Clothing Products on CV. Mawaheejra." Banking and Management Review 12, no. 1 (January 23, 2024): 18–28. http://dx.doi.org/10.52250/bmr.v12i1.732.

Full text
Abstract:
Introduction/Main Objectives: This study determines the quality control of CV. Mawaheejra, determine the factors causing product defects and the application of Statistical Quality Control (SQC) methods. Background Problems: CV. Mawaheejra has carried out control but the quality control is not optimal because of poor quality and errors often occur in the production process which causes product defects that not comply with the quality standards. Research Methods: This study uses a quantitative method. It carried data collection techniques through observation, interviews, documentation, and literature studies. Data analysis using Statistical Quality Control (SQC) methods of flowcharts, check sheets, Pareto charts, control charts, and fishbone diagrams. Finding/Results: Based on the results of research with check sheet aids found four types of defects. In the Pareto chart found the highest number of product disability percentage of 38.47%. From the control chart result, it found deviations because of the U control chart there are three points that exceed UCL and two points that exceed LCL. From the fishbone diagram, there are five factors that are most prominently caused by human and machine factors. Conclusion: Based on the results of the analysis, the company must conduct supervision of employees and machine maintenance to reduce product defects.
APA, Harvard, Vancouver, ISO, and other styles
6

Pramono, Y. B., S. Mulyani, S. B. M. Abduh, B. Dwiloka, E. S. Mustikowati, S. A. Zahro, and F. I. N. Susanto. "Implementation of Statistical Quality Control (SQC) As a Quality Damage Control for Crepes Products in the Indonesian Food Industry." IOP Conference Series: Earth and Environmental Science 1246, no. 1 (September 1, 2023): 012048. http://dx.doi.org/10.1088/1755-1315/1246/1/012048.

Full text
Abstract:
Abstract Snacks like crepes are fragile and have a dry texture. This study aims to identify the root causes of defective products, examine how SQC procedures were applied, decide how to reduce the number of defective products, and take efforts to raise product quality. Data collection is the first step in the research procedure, then comes data processing. The SQC method consists of check sheets, histograms, Pareto diagrams, p-control charts, and fishbone charts. Pareto diagrams were used to assess the results of the crepes product quality, which included flaky tip, size, and crushed flaws. The numbers reported on the check sheet for each defect were 156, 99, and 37 units, respectively. The fishbone diagram displays the factors that contribute to defects, including people, machines, materials, methods, and the environment. The upper control limit is 0.523, the lower control limit is 0.126, and the centre line of the p-control chart is 0.324. Because of fluctuations outside the control region, it may be inferred from this research that the production process for crepe products is not under control. Offering workers on-the-job training to equalize skill levels is one of the strategies to reduce product damage.
APA, Harvard, Vancouver, ISO, and other styles
7

McBean, Sam. "Feminist diagrams." Feminist Theory 22, no. 2 (February 23, 2021): 206–25. http://dx.doi.org/10.1177/1464700121997182.

Full text
Abstract:
On 4 January 1971, Ti-Grace Atkinson delivered a talk entitled ‘Strategy and Tactics: A Presentation of Political Lesbianism’. The talk was later published in her collected essays, Amazon Odyssey. The essay contains thirty-five diagrams: ten ‘Strategy Charts’, three ‘Tactical Charts’ and twenty-two ‘Tactical-Strategy Charts’, which map a strategy of the ‘Oppressor’ (men) and the tactics that the ‘Oppressed’ (women) might develop to lead to a revolution – lesbians, significantly, are the ‘Buffer Zone’ between these two classes. In the only reference I have managed to find to these diagrams, they are referred to as ‘crazy’. This article re-visits these diagrams, exploring the role of the diagram in how Atkinson attempts to map patriarchal relations and also imagine a feminist revolution. Taking Atkinson’s diagrams as a starting point, the article then uses them to begin to narrate a genealogy of the diagram in feminist theory, exploring a diagrammatic imaginary that is an often-used but rarely discussed tactic in feminist writing. Finally, the article opens out to consider how this history of feminist diagrams might be a precursor to more contemporary feminist data visualisations.
APA, Harvard, Vancouver, ISO, and other styles
8

Nur Ramadlan, Wildan, and Teti Sofia Yanti. "Diagram Kendali Poisson Progressive Mean (PPM) dalam Pengendalian Kualitas Produksi Kemasan Minyak Goreng di PT. XY." Bandung Conference Series: Statistics 3, no. 2 (August 3, 2023): 773–79. http://dx.doi.org/10.29313/bcss.v3i2.9390.

Full text
Abstract:
Abstract. In the current modern era, the need for quality products has become an important criterion for consumers when purchasing a product, as the increasing competition in a product market demands companies to produce high-quality products. Quality control is necessary in the production process. Process capability is a quality control technique aimed at estimating the capability of a production process. Statistical quality control can be achieved using control charts, which are diagrams that represent observations of a production process over a specific period of time with Upper Control Limits (UCL) and Lower Control Limits (LCL) that define the pattern of dispersion. Control charts are used to quickly identify products experiencing defects. Control charts are divided into two types: attribute and variable. Attribute control charts are used for discrete data types, such as the number of defects in a product. In real-life situations, there are many cases where monitoring statistical control processes involves attribute data derived from quality characteristics that cannot be measured numerically or quantitatively. To address this type of data, there is a method used for monitoring Poisson processes called the Progressive Mean Attribute Poisson Control Chart (PPM). This research was conducted to examine how much and how quickly the detection of defective products occurred in the production of packaged cooking oil at PT. XY in 2017 using the PPM control chart. After analyzing the PPM control chart, it was concluded that the performance of this control chart was good because it could detect a significant number of data points that were out of control or in an unstable state. Abstrak. Di era modern saat ini, kebutuhan akan produk yang berkualitas menjadi ukuran penting bagi konsumen dalam membeli sebuah produk, karena semakin banyaknya persaingan pada suatu produk membuat perusahaan diminta untuk menghasilkan suau produk yang berkualitas. Pengendalian kualitas perlu dilakukan dalam suatu proses produksi. Kapabilitas proses merupakan sebuah teknik pengendalian kualitas yang bertujuan untuk memperkirakan kemampuan suatu proses produksi. Pegendalian kulitas secara statistik yang dapat digunakan yaitu diagram kendali, diagram kendali merupakan suatu diagram yang menggambarkan pengamatan suatu prosess produksi dalam periode waktu tertentu dengan Batas Kendali Atas (BKA) dan Batas Kendali Bawah (BKB) yang mengatur pola penyebaran. Diagram kendali ini dilakukan dengan tujuan dapat mengidentifikasi secepat mungkin pada produk yang mengalami kerusakan. Diagram kendali dibagi menjadi dua jenis yaitu atribut dan variabel, diagram kendali atribut digunakan untuk tipe data diskrit seperti jumlah kerusakan pada suatu produk. Dalam kehidupan nyata, ada banyak situasi di mana pemantauan proses pengendalian statistik melibatkan data atribut yang berasal dari karakteristik kualitas yang tidak dapat diukur secara numerik atau kuantitatif. Untuk mengatasi jenis data tersebut, terdapat metode yang dapat digunakan untuk pemantauan proses poisson yang disebut diagram kendali atribut Poisson progressive Mean (PPM). Penilitian ini dilakukan untuk melihat seberapa cepat mendeteksi proses produk cacat pada produksi kemasan minyak goreng di PT. XY 2017. Setelah melakukan analisis pada diagram kendali PPM ini diperoleh kesimpulan bahwa kinerja pada diagram kendali ini sudah baik karena dapat mendeteksi banyaknya data yang out of control atau dalam keadaan tidak terkendali.
APA, Harvard, Vancouver, ISO, and other styles
9

Tundo, Tundo, and Andi Saidah. "PELATIHAN PENGGUNAAN E-DRAW MAX UNTUK MEMBUAT DESAIN SISTEM." KAMI MENGABDI 3, no. 1 (June 21, 2023): 17–23. http://dx.doi.org/10.52447/km.v3i1.6801.

Full text
Abstract:
Edraw Max is a 2D business technical diagram software that helps create flowcharts, organization charts, mind maps, network diagrams, floor plans, workflow diagrams, business charts and Engineering diagrams, flowcharts, graphs and mappings, besides E- Draw Max is also a vector-based diagramming software, which is usually used to make it easier to make a design. One of them is the design of a production process system in a factory that can use this application. In this training, the E-Draw Max tools will focus on making Data Flow Diagrams (DFD), which are useful for describing the flow of the created system, which consists of Context Diagrams, Level Diagrams, and Level n Diagrams. Data Flow Diagram (DFD) is a diagram that describes the flow of data from a process or information system. In DFD, there is information related to the input and output of each of these processes. DFD also has various functions, such as conveying system design, describing systems, and designing models. This training was held at the ITS NU Pekalongan Institute of Computer Technology. The purpose of this training is to help ITS NU Pekalongan S1 Computer Technology students in making system designs, specifically designing Data Flow Diagrams (DFD) using E-Draw Max tools to make it easier for students to make the flow of the system made in this case DFD on production process in Industry.
APA, Harvard, Vancouver, ISO, and other styles
10

Singh, Gurpreet, and Rasbir Singh. "Generation of test cases using UML models." INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY 13, no. 7 (July 30, 2014): 4671–74. http://dx.doi.org/10.24297/ijct.v13i7.2511.

Full text
Abstract:
Software Testing plays an important role in Software development because it can minimize the development cost. UML is widely used in the software development, there consists of the designing and coding of the software. Designing phase is done with the help of the UML models, which consists of the sequence diagrams, activity diagrams, use case diagrams, state chart diagrams etc. After designing of the system, the next task is coding. Since the software development is time and human resource consuming, the reduction of consumption is done with the help of the code generation automatically. This work mainly focus on the UML sequence diagram and state chart diagram as the model. We Propose a Technique for Test Case Generation using UML Models. UML models give a lot of  information that should not be ignored in testing. An innovative approach of generating test cases from the combination of UML design diagrams has been discussed in this paper. Present work used an approach where sequence diagram and state chart diagram has been used to generate test cases. The test cases thus generated are suitable for dynamic testing of system.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Charts, diagraxms"

1

Šváchová, Mariana. "Určování způsobilosti a stability vybraného technického procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417798.

Full text
Abstract:
This diploma thesis deals with the evaluation of the capability of a specific production process. The theoretical part of the work contains a description of statistical process control, types of control charts and evaluation of process capability. The practical part is focused on evaluating the capability of a specific process. The method of dataset collection is described at first, then this data are analyzed and the capability of this process is evaluated.
APA, Harvard, Vancouver, ISO, and other styles
2

Kantar, Martin. "Ganttovy diagramy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231384.

Full text
Abstract:
The thesis is aimed at Gantt charts. Primarily on their use in production processes, such as planning and scheduling. The thesis also includes an introduction, explaining what are the Gantt charts, for what are using and what is their principle. The thesis also includes analysis and software possibilities for implementing Gantt charts with using OOP. Programmatic and theoretical analysis of the various functions that are characteristic of Gantt charts, including their internal logic and program implementation. These programmed characteristic functions of Gantt charts were composed in the form of a DLL library, which provides a simple implementation of Gantt charts. By using this library is realized the software for production management. The work is included on the DVD, except the DLL itself software with detailed descriptions of each part of the source code.
APA, Harvard, Vancouver, ISO, and other styles
3

Pong, Lih. "Formal data flow diagrams (FDFD) : a petri-net based requirements specification language /." [Hong Kong : University of Hong Kong], 1985. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12323019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Silverlycke, Peter. "Vidareutveckling av grafkomponent." Thesis, Örebro universitet, Institutionen för naturvetenskap och teknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-23318.

Full text
Abstract:
Rapporten täcker vidareutvecklingen av en grafkomponent som från början kunde visa linjediagram med datapunkter bestående av reella tal. Grafkomponenten var en del av programvaran Tunnel Manager som är utvecklad av Sogeti till Atlas Copco. Tunnel Manager används i kombination med Atlas Copcos borrigg Boomer. Grafkomponenten utvidgades med stapeldiagram med flera serier, stapeldiagram med adderade serier och med cirkeldiagram. Den utvidgades även med nya datapunktstyper i form av datum och tid. Även gruppering av data för stapeldiagram lades till. Utökad information visades också när muspekaren hölls över ett diagram, ett så kallat tooltip. Zoom och panorering i diagrammen implementerades så användaren kunde granska vissa områden i detalj.  Rapporten omfattar även en utredning där det undersöktes vilken information och vilka diagram Atlas Copco hade behov av i framtiden i Tunnel Manager. Det visades sig att det fanns stort behov av att visa diverse information i diagram för att få ett bra underlag till beslutsfattning. Dels för planering av användandet av borriggen. Dels för underhåll av borriggen.  När stora mängder information samlas in behövs bra sätt att sammanfatta den på. Diagram är ett mycket bra sätt för detta ändamål. Diagrammen behöver dock följa vissa grundläggande regler för att de ska vara tillförlitliga. Bland annat att diagram som jämförs ska ha samma skala för att underlätta jämförelsen. Vidareutvecklingen av grafkomponenten tog hänsyn till dessa regler, det bidrog till att den lämpar sig att använda i produktion.
This report covers the further development of a chart component. The component could display a linechart with real number datapoints at the beginning. The chart component was part of as software called Tunnel Manager, developed by Sogeti for Atlas Copco. Tunnel Manager is used in combination with Atlas Copcos drilling rig Boomer. The charts added were barchart with support for several dataseries, stacked barchart with support for stacked dataseries and piechart. A new datapoint type for date and time was added. Grouping of data for the barcharts was also added.  Extended information was shown when the mouse pointer was held over a diagram, a tooltip. Zoom and panning in the charts was implemented, allowing the user to view some parts in detail.  The report also covers an investigation. The investigation finds out what kind of information, and what kinds of charts Atlas Copco had need of in the future in Tunnel Manager. There was a great need for displaying information in charts to get a good base for decision making. The information was needed for planning and maintenance of the drilling rigs.  When a lot of information is gathered from different sources a good way is needed for compilation and displaying of the information. Charts are a very good way of doing this. The carts need to follow a set of basic rules to be trustworthy. For example if several charts is to be compared, they need to have the same scale, to make it easier to compare. The further development of the chart component took these rules into account and it made it suitable for usage in production.
APA, Harvard, Vancouver, ISO, and other styles
5

Pong, Lih, and 龐立. "Formal data flow diagrams (FDFD): a petri-netbased requirements specification language." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1985. http://hub.hku.hk/bib/B31207406.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Marchant, Edward James. "Graphs with weighted colours and hypergraphs." Thesis, University of Cambridge, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.609454.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

YAMAMOTO, Shuichiro. "Reconstructing Data Flow Diagrams from Structure Charts Based on the Input and Output Relationship." Institute of Electronics, Information and Communication Engineers, 1995. http://hdl.handle.net/2237/15017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shobe, Kristin N. "Variable sampling intervals for control charts using count data." Thesis, Virginia Polytechnic Institute and State University, 1988. http://hdl.handle.net/10919/52076.

Full text
Abstract:
This thesis examines the use of variable sampling intervals as they apply to control charts that use count data. Papers by Reynolds, Arnold, and R. Amin developed properties for charts with an underlying normal distribution. These properties are extended in this thesis to accommodate an underlying Poisson distribution.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
9

Lu, Chao-Wen. "Control charts based on residuals for monitoring processes with correlated observations." Diss., Virginia Tech, 1993. http://hdl.handle.net/10919/40300.

Full text
Abstract:
In statistical process control, it is usually assumed that observations on the process output at different times are lID. However, for many processes the observations are correlated and control charts for monitoring these processes have recently received much attention. For monitoring the process level, this study evaluates the properties of control charts, such as the EWMA chart and the CUSUM chart, based on the residuals from the forecast values of an ARMA model. It is assumed that the process mean is a ftrst order autoregressive (AR(l)) model and the observations are the mean plus a random error. Properties of these charts are evaluated using a Markov chain approach or an integral equation approach. The performance of control charts based on the residuals is compared to the performance of control charts based on the original observations. A combined chart using forecasts and residuals as the control statistics as well as a combined chart using the EWMA of observations and the EWMA of residuals as the control statistics are also studied by simulation. It is found that no universally "good" chart exists among all the charts investigated in this study. In addition, for monitoring the process variance, two kinds of EWMA chart based on residuals are studied and compared.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
10

Genest, Blaise. "L'odyssée des graphes de diagrammes de séquences ( MSC-Graphes)." Paris 7, 2004. http://www.theses.fr/2004PA077210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Charts, diagraxms"

1

Nati, Laizer, ed. בורסה: Ha-analisṭ ha-matḥil : kolel 90 ha-yesodot she-kol mashḳiʻa tsarikh la-daʻat. Tel Aviv: Sodot pirsumim kalkaliyim, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yoni, Monṭin, and Shṭaiman Sharon, eds. בורסה: Nituaḥ ṭekhni be-shiṭat nerot Yapaniyim. Tel Aviv: Sodot pirsumim kalkaliyim, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bounford, Trevor. Diagrams and charts. Carson, Calif: Nippan Publications, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Clariván, Carlos. Atlas de astronomía. México, D.F: Trillas, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Asano, Seiichi. A novel concept for understanding the special theory of relativity: The space-time circular diagram method. Tokyo: Gakujutsu Tosho, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yŏnʾguso, Hanʾguk Haengjŏng, ed. Kungmin ŭi chŏngbu chojik pʻyŏllam: Ippŏpbu, haengjŏngbu, sabŏppu, chibang chachʻi tanchʻe. Sŏul-si: Hanʾguk Haengjŏng Yŏnʾguso, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Benacchio, Leopoldo. The great atlas of the universe. Newton Abbot: David & Charles, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Morison, Ian. Estrellas y planetas: Guía de mapas celestes y cartas estelares para la observación del cielo nocturno. Barcelona: Blume, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eash, David A. Flood of June 4-5, 2002, in the Maquoketa River basin, East-Central Iowa. Reston, Va: U.S. Geological Survey, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Teli︠u︡kina, M. V. Nesostoi︠a︡telʹnostʹ (bankrotstvo) v Rossii: Skhemy. Moskva: Izdatelʹskiĭ dom Gorodet︠s︡, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Charts, diagraxms"

1

Starbuck, Craig. "Data Visualization." In The Fundamentals of People Analytics, 283–323. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28674-2_15.

Full text
Abstract:
AbstractThis chapter provides best practices for visualizing data and discusses common types of data visualizations and their respective applications in people analytics contexts. Types of data visualizations include tables, heatmaps, scatterplots, line graphs, slopegraphs, bar charts, combination charts, waterfall charts, waffle charts, Sankey diagrams, and pie charts.
APA, Harvard, Vancouver, ISO, and other styles
2

Yarwood, A. "Graphs, Charts and Flow Diagrams." In Work Out Graphic Communication GCSE, 130–42. London: Macmillan Education UK, 1988. http://dx.doi.org/10.1007/978-1-349-10242-6_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Heftberger, Adelheid. "Charts and Diagrams of Dziga Vertov." In Digital Humanities and Film Studies, 193–214. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-02864-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhou, Yan Ping, and Chew Lim Tan. "Bar Charts Recognition Using Hough Based Syntactic Segmentation." In Theory and Application of Diagrams, 494–97. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/3-540-44590-0_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Winn, Bill. "Charts, Graphs, and Diagrams in Educational Materials." In The Psychology of Illustration, 152–98. New York, NY: Springer New York, 1987. http://dx.doi.org/10.1007/978-1-4612-4674-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Murillo-Morales, Tomas, and Klaus Miesenberger. "AUDiaL: A Natural Language Interface to Make Statistical Charts Accessible to Blind Persons." In Lecture Notes in Computer Science, 373–84. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-58796-3_44.

Full text
Abstract:
AbstractThis paper discusses the design and evaluation of AUDiaL (Accessible Universal Diagrams through Language). AUDiaL is a web-based, accessible natural language interface (NLI) prototype that allows blind persons to access statistical charts, such as bar and line charts, by means of free-formed analytical and navigational queries expressed in natural language. Initial evaluation shows that NLIs are an innovative, promising approach to accessibility of knowledge representation graphics, since, as opposed to traditional approaches, they do not require of additional software/hardware nor user training while allowing users to carry out most tasks commonly supported by data visualization techniques in an efficient, natural manner.
APA, Harvard, Vancouver, ISO, and other styles
7

Carmagnola, Fulvio. "Maps, Diagrams and Charts: Making the Cultural Trait Visible." In Understanding Cultural Traits, 161–78. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-24349-8_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dai, Aochu, and Mingsheng Ying. "QReach: A Reachability Analysis Tool for Quantum Markov Chains." In Computer Aided Verification, 520–32. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-65633-0_23.

Full text
Abstract:
AbstractWe present QReach, the first reachability analysis tool for quantum Markov chains based on decision diagrams CFLOBDD (presented at CAV 2023). QReach provides a novel framework for finding reachable subspaces, as well as a series of model-checking subprocedures like image computation. Experiments indicate its practicality in verification of quantum circuits and algorithms. QReach is expected to play a central role in future quantum model checkers.
APA, Harvard, Vancouver, ISO, and other styles
9

Nagl, Manfred. "Process Interaction Diagrams: More than Chains or Transport Networks." In Software Architectures, 123–40. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-51335-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dolbear, Sam. "Lines that Reduce." In The Case for Reduction, 117–33. Berlin: ICI Berlin Press, 2022. http://dx.doi.org/10.37050/ci-25_06.

Full text
Abstract:
Through various cases and instances, this essay opens with the question of biography and the demands of its form: that is, biography’s attempt to reduce historical totalities to the page in moments of sudden condensation. It then introduces the figure of Charlotte Wolff (1897–1986), a doctor and later hand reader and sexologist, who appears on a diagram, constructed by Walter Benjamin in 1932, to map his life through his ‘Urbekanntschaften’ (primal acquaintances). It then seeks to transpose Benjamin’s diagram into other linear forms, such as a family tree, a diagram of chemical affinity, and an astral chart, to add one: the diagram as a map of the hand. This opens up a number of temporal, historical, and epistemic reductions, or cases of reduction, in Wolff’s work and beyond. It concludes with a particular moment in Wolff’s biography — her arrest in 1933 and her escape to Paris — as a final instance of the line, as border.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Charts, diagraxms"

1

Radescu, Radu, and Florin Stoian. "MODERN TOOLS FOR CREATING AND MANAGING UML CHARTS IN ONLINE LEARNING PLATFORMS." In eLSE 2018. ADL Romania, 2018. http://dx.doi.org/10.12753/2066-026x-18-065.

Full text
Abstract:
In this paper we propose an online learning method for constructing and editing different types of UML diagrams, with details about their purpose and the technologies used to create the study application. It describes how to design and use the application and how to integrate it as an e-learning content in a virtual learning platform. The paper presents the UML notations, which will be grouped according to the diagrams corresponding to each notation. Analysis of an application implies the development of several categories of models: the use case model, the structural model and the behavior model. The following web technologies were used to build the application: HTML, Javascript, jQuery, CSS3, Ajax, PHP, and MySQL. The basic technology of the application is Javascript, namely the jsuml library. This library has a level-based architecture where graphics management (objects specific to UML charts) is done using application objects, separated into various files. The paper describes the actions in order of their appearance in the application menu. A new created UML chart (type: class, use case, status) generates a new work area, the specific elements of the selected diagram appearing in their dedicated areas. The paper presents case studies with generating and editing examples for all types of UML charts. The procedures the UML charts are created and modified with, as well as the definition of UML diagrams and their classification are described in the application. The Javascript technology was chosen because it allows work with the server without refreshing the page and because it has become more and more powerful, resulting in a more dynamic client-browser interaction. The paper presents examples of new created diagrams using the proposed UML chart management tool. The corresponding application is integrated as e-learning content into the Easy-Learning online learning platform in order to be used as a virtual learning module. Survey experimental results are presented.
APA, Harvard, Vancouver, ISO, and other styles
2

Seghedin, Neculai eugen, and Chitariu Dragos. "SOFTWARE APPLICATION FOR THE DEVELOPMENT OF IDEA DIAGRAMS USED IN TECHNICAL CREATIVITY." In eLSE 2015. Carol I National Defence University Publishing House, 2015. http://dx.doi.org/10.12753/2066-026x-15-258.

Full text
Abstract:
In technical creativity three categories of techniques and methods of creation were structured: logical, intuitive and logical-intuitive. Idea diagrams, alongside morphological matrixes and the generalized object of creation are part of logical methods for creation. Generally, through idea diagrams it can be understood a plane graphical representation of existing correlation between various knowledge representation forms. Accordingly to the principles, terminology and general theory of technical creation, the idea diagrams are an open graphical representation, arborescente type containing structured information on the state of science and technology in a field. In the paper is presented an software application for the elaboration of idea diagrams, accordingly to a methodology in eight steps previously made. These steps are: a. Delimitation of scientific and technical domain in which the diagram will be made; b. Documentation on the technical solutions, criteria and sub criteria of these solution; c. Establishing the criteria and sub criteria for classifying solutions in the field; Establishing the representative solutions for each level or sublevel classification. The representative solutions are searched considering: the level of detail, quality graphical representation etc. e. Plotting the idea diagram; f. Make possible corrections; g. Establish ways and directions for development in the field; h. Formulation of new creative themes. The application provides access to sources of information, databases that grow continuously. The main function of the application is the actual plotting of the chart by selecting the main number of solutions for the criteria and sub-criteria of classification in the field and designation of those. The diagrams allow the pairing of images with the representative solutions for each sub-criteria classification criteria. Moreover, for each criteria or sub-criteria database solutions can be structured that define the current state of knowledge. In this way, it can be created a complete picture of the knowledge state in the structured field. The proposed application removes the main disadvantage of classically drawn diagrams, which consists of the limited number of solutions that could be included in the chart. Thus, it can be created a structured picture of a complete state of knowledge in the field. The proposed application removes the main disadvantage of classically plotted diagrams which consists in the limited number of solutions that could be included in the chart.
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Xingchan, and Xinquan Wu. "Code Generation from UML State Chart Diagrams." In 2022 International Conference on Management Engineering, Software Engineering and Service Sciences (ICMSS). IEEE, 2022. http://dx.doi.org/10.1109/icmss55574.2022.00010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Heryanto, Andika Yuli. "Bakpia Quality Control Analysis Using the Statistical Quality Control (SQC) Method (Case Study: SMEs Bakpia Latief, Kediri<i>)</i>." In The 6th International Conference on Science and Engineering. Switzerland: Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-fzb5j6.

Full text
Abstract:
Bakpia is made from green beans and sugar wrapped in flour. Bakpia Latief Kediri is a bakpia industry in the City of Kediri. The company needs help in the production process activities. There are still products that need to be fixed. The types of it defects in the company are burnt and cracked. This study aimed to determine the performance of its quality control, determine the most dominant types of defects in its products, and provide suggestions for improving its production process. The research method uses the Statistical Quality Control method. Data is taken in the form of primary data and secondary data. Primary data was collected by interview and observation. Interviews were conducted using in-depth interviews. Observations were made for 30 days. Data analysis uses statistical tools, which include check sheets, histograms, fishbone diagrams, Pareto diagrams, and control charts p. Bakpia quality control at Bakpia Latief is under control because the p chart control chart shows that only one point is out of the control limits. The most dominant defect in its products is burnt, with an average percentage of 0.617%. Corrective actions to reduce the existence of defective products, namely repairing and maintaining production machines, improving the stages of the production process, developing human resources, and repairing production facilities. Keywords: Product Defects, Quality Control, Statistical Quality Control
APA, Harvard, Vancouver, ISO, and other styles
5

Feinerer, Ingo, Gernot Salzer, and Tanja Sisel. "Class Diagrams with Equated Association Chains." In 2013 International Symposium on Theoretical Aspects of Software Engineering (TASE). IEEE, 2013. http://dx.doi.org/10.1109/tase.2013.35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ferioli, Marco. "The Use of Interference Diagrams to Avoid Impeller Resonance: An Application to IGV Design." In ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/detc2009-86080.

Full text
Abstract:
Interference diagrams can be used to avoid the potential excitation of a particular mode of vibration for centrifugal compressor impellers, thus reducing the risk of fatigue failures. Such diagrams are an excellent tool to combine information on impeller natural frequencies and mode shapes, excitation sources and operating speed of the machine on the same graph. Once the impeller design has been finalized in terms of aerodynamic performance, structural assessments and therefore geometry, Finite Element Analysis can be used to predict its natural frequencies and mode shapes (i.e. nodal diameters). Results can therefore be shown on a chart, together with the operating speed range of the machine. The need to plot on a single diagram this whole set of data arises from the mathematical evidence to consider the frequency of vibration together with the mode shape and the shape of the exciting force, while analyzing resonances. Typical Campbell diagrams are unable to provide this information at a glance. A common source of excitation for the first impeller of centrifugal compressors is the IGV set. Inlet Guide Vanes produce an exciting frequency that is directly proportional to the number of vanes N, where N represents also the shape of the excitation. The interference diagram can therefore be used: • to design and optimize the IGV for a new machine; • to choose between two different designs; • to evaluate the impact of a new IGV for the impeller of an existing compressor. A case study will be introduced, in order to show the application of interference diagrams to avoid potentially dangerous resonances between an IGV set and the first impeller during the re-design phase for a centrifugal compressor already in operation.
APA, Harvard, Vancouver, ISO, and other styles
7

"FROM ONTOLOGY CHARTS TO CLASS DIAGRAMS - semantic analysis aiding systems design." In 6th International Conference on Enterprise Information Systems. SciTePress - Science and and Technology Publications, 2004. http://dx.doi.org/10.5220/0002631103890395.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guaqueta, J., and P. Mach. "Normalized chart diagrams and their use in practical applications." In 26th International Spring Seminar on Electronics Technology: Integrated Management of Electronic Materials Production, 2003. IEEE, 2003. http://dx.doi.org/10.1109/isse.2003.1260564.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Daszko, Marcia. "Total quality management: tools and techniques." In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1991. http://dx.doi.org/10.1364/oam.1991.tum1.

Full text
Abstract:
The seven basic tools allow people looking at a problem to display the data graphically. The tools include: Pareto chart, check sheet, cause and effect diagram, histogram, scatter diagram, line graph, and control chart. The seven new management tools focus on how to improve managing and planning: affinity diagram, interrelationship digraph, tree diagram, prioritization matrices, matrix diagram, process decision program chart, and activity network diagram.
APA, Harvard, Vancouver, ISO, and other styles
10

Seo, Yun-Ho, and Chong-Won Lee. "A New Frequency-Speed Diagram Weighted With Strength of Modes in Rotating Machinery." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-50855.

Full text
Abstract:
The coincidence of operating speed and critical speed must be avoided in the design of a rotor system. If the rotor system has various critical speeds as well as many modes, the determination of dangerous modes is a first step of the design stages. In this paper, the use of a new frequency-speed diagram that displays the significance of modes in order to help the design and analysis of a rotor system is suggested. The diagram is a modified version of a waterfall chart. The method graphically shows the magnitude of the forced responses by the directional frequency response matrices in accordance with operating speed because the responses are the most important criterion to determine significance of modes. In addition, because the excitation force of a rotor system such as mass unbalances is not known before the completion of manufacturing, the concept of summation of matrix norms, which is more conservative than conventional H∞ norm, is used in order to consider the worst of the worst case. A simple rotor system and a real generator system, which has both anisotropy and asymmetry, are demonstrated for usefulness of the proposed diagrams. The information of the diagram is then used to analyze the dynamic characteristics of the generator system.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Charts, diagraxms"

1

Karlstrom, Karl, Laura Crossey, Allyson Matthis, and Carl Bowman. Telling time at Grand Canyon National Park: 2020 update. National Park Service, April 2021. http://dx.doi.org/10.36967/nrr-2285173.

Full text
Abstract:
Grand Canyon National Park is all about time and timescales. Time is the currency of our daily life, of history, and of biological evolution. Grand Canyon’s beauty has inspired explorers, artists, and poets. Behind it all, Grand Canyon’s geology and sense of timelessness are among its most prominent and important resources. Grand Canyon has an exceptionally complete and well-exposed rock record of Earth’s history. It is an ideal place to gain a sense of geologic (or deep) time. A visit to the South or North rims, a hike into the canyon of any length, or a trip through the 277-mile (446-km) length of Grand Canyon are awe-inspiring experiences for many reasons, and they often motivate us to look deeper to understand how our human timescales of hundreds and thousands of years overlap with Earth’s many timescales reaching back millions and billions of years. This report summarizes how geologists tell time at Grand Canyon, and the resultant “best” numeric ages for the canyon’s strata based on recent scientific research. By best, we mean the most accurate and precise ages available, given the dating techniques used, geologic constraints, the availability of datable material, and the fossil record of Grand Canyon rock units. This paper updates a previously-published compilation of best numeric ages (Mathis and Bowman 2005a; 2005b; 2007) to incorporate recent revisions in the canyon’s stratigraphic nomenclature and additional numeric age determinations published in the scientific literature. From bottom to top, Grand Canyon’s rocks can be ordered into three “sets” (or primary packages), each with an overarching story. The Vishnu Basement Rocks were once tens of miles deep as North America’s crust formed via collisions of volcanic island chains with the pre-existing continent between 1,840 and 1,375 million years ago. The Grand Canyon Supergroup contains evidence for early single-celled life and represents basins that record the assembly and breakup of an early supercontinent between 729 and 1,255 million years ago. The Layered Paleozoic Rocks encode stories, layer by layer, of dramatic geologic changes and the evolution of animal life during the Paleozoic Era (period of ancient life) between 270 and 530 million years ago. In addition to characterizing the ages and geology of the three sets of rocks, we provide numeric ages for all the groups and formations within each set. Nine tables list the best ages along with information on each unit’s tectonic or depositional environment, and specific information explaining why revisions were made to previously published numeric ages. Photographs, line drawings, and diagrams of the different rock formations are included, as well as an extensive glossary of geologic terms to help define important scientific concepts. The three sets of rocks are separated by rock contacts called unconformities formed during long periods of erosion. This report unravels the Great Unconformity, named by John Wesley Powell 150 years ago, and shows that it is made up of several distinct erosion surfaces. The Great Nonconformity is between the Vishnu Basement Rocks and the Grand Canyon Supergroup. The Great Angular Unconformity is between the Grand Canyon Supergroup and the Layered Paleozoic Rocks. Powell’s term, the Great Unconformity, is used for contacts where the Vishnu Basement Rocks are directly overlain by the Layered Paleozoic Rocks. The time missing at these and other unconformities within the sets is also summarized in this paper—a topic that can be as interesting as the time recorded. Our goal is to provide a single up-to-date reference that summarizes the main facets of when the rocks exposed in the canyon’s walls were formed and their geologic history. This authoritative and readable summary of the age of Grand Canyon rocks will hopefully be helpful to National Park Service staff including resource managers and park interpreters at many levels of geologic understandings...
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Charts, diagraxms' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography