Relevant bibliographies by topics / Chromium-molybdenum-iron alloys

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Chromium-molybdenum-iron alloys'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Chromium-molybdenum-iron alloys.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Chromium-molybdenum-iron alloys"

1

Udovsky, A., V. Grafutin, V. Kolotushkin, et al. "Changes of electron density and defects distribution in binary and ternary iron alloys studied by positron annihilation." Journal of Mining and Metallurgy, Section B: Metallurgy 53, no. 3 (2017): 399–405. http://dx.doi.org/10.2298/jmmb160507040g.

Full text
Abstract:
Properties of binary and ternary iron based alloys doped by different additions were investigated. It was shown for binary alloys containing chromium, molybdenum and tungsten were that results of doping by 0.8% molybdenum and tungsten are similar to those for the sample doped by 9%chromium. Ternary alloys containing chromium and less amounts of molybdenum, tungsten and vanadium were investigated as well. Two types of defects were observed: divacancies and cluster-like defects. It was shown that the electron density in ternary alloys is similar to that in binary alloys containing 0.8% molybdenu
APA, Harvard, Vancouver, ISO, and other styles
2

Ageeva, E. V., A. Yu Altukhov, R. A. Latypov, and G. R. Latypova. "X-ray spectral microanalysis of hardened additive products made of electroerosion cobalt-chromium alloys." MATEC Web of Conferences 329 (2020): 02014. http://dx.doi.org/10.1051/matecconf/202032902014.

Full text
Abstract:
This article presents the results of an X-ray spectral microanalysis of cobalt-chromium alloys based on particles of the of the tungsten nickel iron alloy dispersed by electric erosion, obtained in alcohol. It has been experimentally proved that a part of oxygen is present in the cobalt-chromium alloy of particles of the cobalt-chromium-molybdenum alloy dispersed by electric erosion. All other elements are distributed relatively evenly over the volume of particles. It is shown that Co, Cr and Mo are the main elements of the (CoCrMo) alloy dispersed by electric erosion.
APA, Harvard, Vancouver, ISO, and other styles
3

Raghavan, V. "Cr-Fe-Mo (chromium-iron-molybdenum)." Journal of Phase Equilibria 15, no. 5 (1994): 532–33. http://dx.doi.org/10.1007/bf02649410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sequeira, César A. C., David S. P. Cardoso, Luís Amaral, Biljana Šljukić, and Diogo M. F. Santos. "On the performance of commercially available corrosion-resistant nickel alloys: a review." Corrosion Reviews 34, no. 4 (2016): 187–200. http://dx.doi.org/10.1515/corrrev-2016-0014.

Full text
Abstract:
AbstractThe corrosion behavior of nickel (Ni)-based alloys used for low-temperature aqueous or condensed systems is reviewed in detail in this paper. Commercially available pure Ni, nickel-copper (Ni-Cu), nickel-molybdenum (Ni-Mo), nickel-chromium-molybdenum (Ni-Cr-Mo), and nickel-chromium-iron (Ni-Cr-Fe) alloys as well as cast Ni-based alloys are addressed. It is shown that Ni-Cr-Mo alloys are multipurpose alloys that can be used in both reducing and oxidizing conditions. Special attention is given to a few Ni alloys, which not only extend the range of usefulness of existing alloys by overcom
APA, Harvard, Vancouver, ISO, and other styles
5

Raghavan, V. "C-Cr-Fe-Mo (Carbon-Chromium-Iron-Molybdenum)." Journal of Phase Equilibria and Diffusion 28, no. 3 (2007): 270–73. http://dx.doi.org/10.1007/s11669-007-9067-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lushchenkov, V. L., G. I. Slyn'ko, and A. D. Sherman. "Distribution of chromium and molybdenum in white cast iron." Metal Science and Heat Treatment 31, no. 8 (1989): 634–35. http://dx.doi.org/10.1007/bf00802697.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Evstyukhina, I. A., V. P. Kolotushkin, V. Yu Miloserdin, et al. "Use of nuclear physics methods for investigation of short-range ordering and defects in iron based simulatuing alloys." Journal of Mining and Metallurgy, Section B: Metallurgy 56, no. 1 (2020): 135–41. http://dx.doi.org/10.2298/jmmb190624002e.

Full text
Abstract:
The changes of short range ordering and electron density were investigated by means of the nuclear gamma-resonance and the positron annihilation spectroscopies in model alloys containing tungsten, chromium, molybdenum, and vanadium used as dopants. The change of the short-range ordering parameter sign was detected in alloys containing vanadium. Different ordering was also observed in binary and ternary iron alloys. It was shown that dislocations were the main defects in these materials after rolling.
APA, Harvard, Vancouver, ISO, and other styles
8

Martinz, Hans Peter, Bruno Tourneret, Pascal Jehanno, and Brigitte Nigg. "The Oxidation Behaviour of Pack-Treated Heavy Refractory Alloys." Materials Science Forum 595-598 (September 2008): 629–37. http://dx.doi.org/10.4028/www.scientific.net/msf.595-598.629.

Full text
Abstract:
The heavy refractory metals and alloys Molybdenum (Mo), Molybdenum – Silicon – Boron (Mo–Si-B; “MoSiBor”), Tungsten (W), Tungsten – Copper (W-Cu), Tungsten – Nickel – Iron (W-Ni-Fe; “Densimet D 176 and 185”) and Tungsten – Nickel – Molybdenum - Iron (W-Ni- Mo-Fe; “Densimet D2M”) were pack-treated at 1100°C with Silicon - powder to form siliconized zones and/or intermetallic phases which are intended to be more oxidation resistant than the plain base materials. These materials (especially the W-based ones) are used at ambient conditions as counterweights, radiation shields etc. because of their
APA, Harvard, Vancouver, ISO, and other styles
9

Raghavan, V. "C-Cr-Fe-Mo-V (Carbon-Chromium-Iron-Molybdenum-Vanadium)." Journal of Phase Equilibria and Diffusion 28, no. 3 (2007): 286–88. http://dx.doi.org/10.1007/s11669-007-9072-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Raghavan, V. "Cr-Fe-Mo-N-Ni (Chromium-Iron-Molybdenum-Nitrogen-Nickel)." Journal of Phase Equilibria and Diffusion 28, no. 3 (2007): 291. http://dx.doi.org/10.1007/s11669-007-9074-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Chromium-molybdenum-iron alloys"

1

Nissley, Nathan Eugene. "Intermediate temperature grain boundary embrittlement in nickel-base weld metals." Columbus, Ohio : Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1156949345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hughes, Robert James. "Magneto-oscillatory exchange coupling in magnetic multilayers with Cr←1←-←xV←x and Cr←1←-←xMo←x spacers : the correlation of extremal fermi surface vectors with oscillation periods." Thesis, University of Bristol, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326267.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Chromium-molybdenum-iron alloys"

1

"Corrosion of High-Nickel Alloy Weldments." In Corrosion of Weldments. ASM International, 2006. http://dx.doi.org/10.31399/asm.tb.cw.t51820125.

Full text
Abstract:
Abstract Nickel-base alloys used for low-temperature aqueous corrosion are commonly referred to as corrosion-resistant alloys (CRAs), and nickel alloys used for high-temperature applications are known as heat-resistant alloys, high-temperature alloys, or superalloys. The emphasis in this chapter is on the CRAs and in particular nickel-chromium-molybdenum alloys. The chapter provides a basic understanding of general welding considerations and describes the welding metallurgy of molybdenum-containing CRAs and of nickel-copper, nickel-chromium, and nickel-chromium-iron CRAs. It discusses the corrosion behavior of nickel-molybdenum alloys and nickel-chromium-molybdenum alloys. Information on the phase stability and corrosion behavior of nickel-base alloys is also included.
APA, Harvard, Vancouver, ISO, and other styles
2

"Corrosion of Ferritic Stainless Steel Weldments." In Corrosion of Weldments. ASM International, 2006. http://dx.doi.org/10.31399/asm.tb.cw.t51820077.

Full text
Abstract:
Abstract Ferritic stainless steels are essentially iron-chromium alloys with body-centered cubic crystal structures. Chromium content is usually in the range of 11 to 30%. The primary advantage of the ferritic stainless steels, and in particular the high-chromium, high-molybdenum grades, is their excellent stress-corrosion cracking resistance and good resistance to pitting and crevice corrosion in chloride environments. This chapter provides information on the classifications, properties, and general welding considerations of ferritic stainless steels. The emphasis is placed on intergranular corrosion, which is the most common cause of failure in ferritic stainless steel weldments. Two case histories involving intergranular corrosion failures of ferritic stainless steel weldments are included. A brief discussion on hydrogen embrittlement is also provided.
APA, Harvard, Vancouver, ISO, and other styles
3

"Nickel alloys with 28% molybdenum and small additions of iron and chromium." In The Alloy Tree. CRC Press, 2004. http://dx.doi.org/10.1201/9780203024010.ch3j.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Chromium-molybdenum-iron alloys"

1

Venkatesh, Anand, and Ajit K. Roy. "The Evaluation of the Cracking Susceptibility of Alloy 718 in an Acidic Solution." In ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26493.

Full text
Abstract:
An austenitic iron-nickel-chromium-molybdenum steel, known as Alloy 718 (N07718), has been investigated for its corrosion resistance in an aqueous environment relevant to the sulfur-iodine (S-I) process, proposed to generate hydrogen using nuclear heat. The slow-strain-rate (SSR) testing method was used to evaluate the cracking susceptibility of this alloy at ambient and elevated temperatures. A strain rate of 3.3 × 10−6 sec−1 was used in these tests. The localized corrosion behavior of this alloy was also evaluated by the cyclic potentiodynamic polarization technique. Further, the fracture mo
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Chromium-molybdenum-iron alloys' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography