Log in

Relevant bibliographies by topics / Chromium-molybdenum-iron alloys – Magnetic properties / Journal articles

To see the other types of publications on this topic, follow the link: Chromium-molybdenum-iron alloys – Magnetic properties.

Journal articles on the topic 'Chromium-molybdenum-iron alloys – Magnetic properties'

Author: Grafiati

Published: 4 June 2021

Last updated: 6 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 37 journal articles for your research on the topic 'Chromium-molybdenum-iron alloys – Magnetic properties.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Lavrentiev, M. Yu, S. L. Dudarev, and D. Nguyen-Manh. "Magnetic cluster expansion model for high-temperature magnetic properties of iron and iron–chromium alloys." Journal of Applied Physics 109, no. 7 (2011): 07E123. http://dx.doi.org/10.1063/1.3556900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gervasyeva, I. V., Dmitrii Rodionov, and Yulia Khlebnikova. "Texture Formation in Thin Tapes from Ni-Based Ternary Alloys with Cr, W, Mo and V." Materials Science Forum 702-703 (December 2011): 908–11. http://dx.doi.org/10.4028/www.scientific.net/msf.702-703.908.

Full text

Abstract:

Texture, structure, and magnetic and mechanical properties of thin tape substrates fabricated of ternary nickel alloys with chromium, tungsten, molybdenum, and vanadium have been investigated. It has been shown that in Ni93.8Cr4.0Mo2.2, Ni88.5Cr6.2V5.3and Ni88.4Cr9.2W2.4 alloys a sharp cube texture can form, which is stable up to high annealing temperatures. In the Ni87.6Cr8.0Mo4.4alloy, other weak orientations are present, along with the strong cube component. The possibility of obtaining a sharp cube texture after primary recrystallization is controlled by the quantitative relationship betwe

APA, Harvard, Vancouver, ISO, and other styles

3

Kato, Tetsuo, Noriyoshi Kurata, and Tomomi Yamamoto. "Magnetic Properties of the Iron-12.5 Percent Chromium Sintered Magnetic Alloy in Alternating Field." Journal of the Japan Society of Powder and Powder Metallurgy 43, no. 2 (1996): 226–29. http://dx.doi.org/10.2497/jjspm.43.226.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kato, Tetsuo, Noriyoshi Kurata, Yufen Bao, and Katsushi Kusaka. "Structure and Magnetic Properties in the Sintered 12.5 Percent Chromium-Iron Magnetic Alloy Added Fe-P." Journal of the Japan Society of Powder and Powder Metallurgy 44, no. 2 (1997): 179–84. http://dx.doi.org/10.2497/jjspm.44.179.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Johari, Nurhaslina, Rosliza Sauti, Noorsyakirah Abdullah, et al. "Physical and Mechanical Properties of Injection Molded Co-Cr-Mo Alloy Powder for Orthopedic Applications." Advanced Materials Research 1133 (January 2016): 80–84. http://dx.doi.org/10.4028/www.scientific.net/amr.1133.80.

Full text

Abstract:

Cobalt-chromium alloys are commonly used for surgical implants because of their high strength, superior corrosion resistance, non-magnetic behavior, and biocompatibility. Cobalt-Chromium-Molybdenum (Co-Cr-Mo) applications include prosthetic replacements of hips. This paper presents the attempt to produce metallic implant using Co-Cr-Mo powder by MIM process, focusing on the effects of different heating rate during sintering process at 1380°C. Co-Cr-Mo powder were mixed homogeneously with palm oil and conventional binders respectively with powder loading 65 vol% and was injection molded using v

APA, Harvard, Vancouver, ISO, and other styles

6

Kato, Tetsuo, Noriyoshi Kurata, Makoto Kawamura, and Katsushi Kusaka. "Influence of Additive Oxide Powders on the Micro-structure and Direct Alternating Magnetic Properties of Sintered Iron-Chromium Magnetic Alloy." Journal of the Japan Society of Powder and Powder Metallurgy 42, no. 5 (1995): 639–44. http://dx.doi.org/10.2497/jjspm.42.639.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sagasti, Ariane, Verónica Palomares, Jose María Porro, et al. "Magnetic, Magnetoelastic and Corrosion Resistant Properties of (Fe–Ni)-Based Metallic Glasses for Structural Health Monitoring Applications." Materials 13, no. 1 (2019): 57. http://dx.doi.org/10.3390/ma13010057.

Full text

Abstract:

We have performed a study of the magnetic, magnetoelastic, and corrosion resistance properties of seven different composition magnetoelastic-resonant platforms. For some applications, such as structural health monitoring, these materials must have not only good magnetomechanical properties, but also a high corrosion resistance. In the fabricated metallic glasses of composition Fe 73 − x Ni x Cr 5 Si 10 B 12 , the Fe/Ni ratio was varied (Fe + Ni = 73% at.) thus changing the magnetic and magnetoelastic properties. A small amount of chromium ( Cr 5 ) was added in order to achieve the desired good

APA, Harvard, Vancouver, ISO, and other styles

8

Zeng, Hongbin, Yudong Sui, Ge Niu, Han He, Yehua Jiang, and Mojin Zhou. "Effect of alloy powder on the properties of ZTA particles reinforced high chromium cast iron composites." Materials Research Express 8, no. 3 (2021): 036509. http://dx.doi.org/10.1088/2053-1591/abeb48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ramana, S. V. V., G. S. Upadhyaya, and M. L. Vaidya. "Microstructures and Properties of Sintered Low Alloy Chromium Steels with Molybdenum Addition / Gefüge und Eigenschaften niedrig legierter Chromstähle mit Molybdänzusatz." Practical Metallography 24, no. 3 (1987): 105–18. http://dx.doi.org/10.1515/pm-1987-240303.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Li, Yanwei, Yugui Li, Peisheng Han, and Xiaogang Wang. "Effect of hot rolling on microstructure and properties of high-chromium cast iron hardfacing cladding plate." Materials Research Express 6, no. 3 (2018): 036523. http://dx.doi.org/10.1088/2053-1591/aaf66e.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Ibrahim, Mervat M., Shimaa El-Hadad, and Mohamed Mourad. "Effect of liquid-solid volume ratios on the interfacial microstructure and mechanical properties of high chromium cast iron and low carbon steel bimetal." Materials Research Express 6, no. 12 (2020): 1265c2. http://dx.doi.org/10.1088/2053-1591/ab6372.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Udovsky, A., V. Grafutin, V. Kolotushkin, et al. "Changes of electron density and defects distribution in binary and ternary iron alloys studied by positron annihilation." Journal of Mining and Metallurgy, Section B: Metallurgy 53, no. 3 (2017): 399–405. http://dx.doi.org/10.2298/jmmb160507040g.

Full text

Abstract:

Properties of binary and ternary iron based alloys doped by different additions were investigated. It was shown for binary alloys containing chromium, molybdenum and tungsten were that results of doping by 0.8% molybdenum and tungsten are similar to those for the sample doped by 9%chromium. Ternary alloys containing chromium and less amounts of molybdenum, tungsten and vanadium were investigated as well. Two types of defects were observed: divacancies and cluster-like defects. It was shown that the electron density in ternary alloys is similar to that in binary alloys containing 0.8% molybdenu

APA, Harvard, Vancouver, ISO, and other styles

13

Kato, T., S. Yoshino, H. Kanazawa, Y. Oshima, and S. Yahagi. "Influence of Aluminum Composition on the Magnetic Properties of Iron-Chromium Magnetic Alloy in an Alternating Magnetic Field." Journal of the Magnetics Society of Japan 18, no. 2 (1994): 453–56. http://dx.doi.org/10.3379/jmsjmag.18.453.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Kato, T., S. Yoshino, H. Kanazawa, Y. Oshima, and S. Yahagi. "Influence of Aluminum Composition on the Magnetic Properties of Iron-Chromium Magnetic Alloy in an Alternating Magnetic Field." IEEE Translation Journal on Magnetics in Japan 9, no. 6 (1994): 267–71. http://dx.doi.org/10.1109/tjmj.1994.4565991.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Окунев, В. Д., З. А. Самойленко, P. Aleshkevych, H. Szymczak, A. Szewczyk та И. А. Антошина. "Влияние ионного (Ar-=SUP=-+-=/SUP=-) облучения на кластерный магнетизм и магнитные взаимодействия в аморфном сплаве Fe-=SUB=-67-=/SUB=-Cr-=SUB=-18-=/SUB=-B-=SUB=-15-=/SUB=-". Физика твердого тела 61, № 10 (2019): 1774. http://dx.doi.org/10.21883/ftt.2019.10.48248.422.

Full text

Abstract:

Comparing the magnetic resonance absorption spectra with the data on structure and magnetic properties of amorphous Fe67Cr18B15 samples, we have shown that a randomly inhomogeneous medium of amorphous alloy is multiphase. The presence of two types of samples with a different clusterized structure and the use of ion (Ar+) irradiation in the experiment contributed the observation of four main phases with different magnetic properties. The main α-(Fe,Cr) phase contains large clusters D<400 Å in size with a tendency to phase separation of iron (α-Fe) and chromium (α-Cr) under irradiation, which

APA, Harvard, Vancouver, ISO, and other styles

16

Kato, T., S. Yoshino, and T. Kato. "Changes in the AC Magnetic Properties of an Iron Chromium Magnetic Alloy as a Result of Annealing." Journal of the Magnetics Society of Japan 19, no. 2 (1995): 441–44. http://dx.doi.org/10.3379/jmsjmag.19.441.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Takagi, Ken-ichi, and Masao Komai. "Effects of Mo/B atomic ratio on the properties and structure of chromium adding iron-molybdenum complex boride base hard alloys." Journal of the Japan Society of Powder and Powder Metallurgy 36, no. 4 (1989): 390–96. http://dx.doi.org/10.2497/jjspm.36.390.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Guo, Erjun, Lihua Wang, Liping Wang, and Yongchang Huang. "Effects of RE, V, Ti and B composite modification on the microstructure and properties of high chromium cast iron containing 3% molybdenum." Rare Metals 28, no. 6 (2009): 606–11. http://dx.doi.org/10.1007/s12598-009-0116-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Omole, Sylvester Olanrewaju, Kenneth Kanayo Alaneme, and Akinlabi Oyetunji. "MECHANICAL DAMPING CHARACTERISTICS OF DUCTILE AND GREY IRONS MICRO-ALLOYED WITH COMBINATIONS OF Mo, Ni, Cu AND Cr." Acta Metallurgica Slovaca 27, no. 2 (2021): 87–93. http://dx.doi.org/10.36547/ams.27.2.791.

Full text

Abstract:

Damping behaviour of micro alloyed ductile and gray cast irons were investigated in this study. This was aimed at establishing the effect of composition and microstructural parameters on the damping properties of the micro alloyed cast irons, which have shown promise for utilization in automobile and machine building where enhanced damping performance are vital. Gray cast iron containing manganese as base metal was micro alloyed randomly with molybdenum, nickel, chromium and copper at an amount not more than 0.2 % each; magnesium was added to the melt prior to casting. The microstructures show

APA, Harvard, Vancouver, ISO, and other styles

20

binti Johari, Nurhaslina, Rosdi Ibrahim, Ahmad Nizam bin Abdullah, Muhammad Jabir bin Suleiman Ahmad, and Abdul Rahim Abu Talib. "The Effect of Sintering Temperature on Physical Properties of Sintered Inconel 718 for Potential Aerospace Industry Application." Advanced Materials Research 879 (January 2014): 139–43. http://dx.doi.org/10.4028/www.scientific.net/amr.879.139.

Full text

Abstract:

The most demanding high temperature application requires nickel-based super alloys, named Inconel 718 (IN718) is a precipitation hardenable nickel chromium alloy containing significant amount of iron, niobium and molybdenum along with lesser amounts of aluminium and titanium. The development of IN718 for metal injection molding was already proposed to provide increased resistance to distortion during and prior to debinding. This paper reports on the effects of sintering temperature on physical and mechanical properties of IN718 alloy. IN718 powder (60 vol%) with binder formulation (40 vol%) co

APA, Harvard, Vancouver, ISO, and other styles

21

Riebisch, M., B. Pustal, and A. Bührig-Polaczek. "Influence of Carbide-Promoting Elements on the Microstructure of High-Silicon Ductile Iron." International Journal of Metalcasting 14, no. 4 (2020): 1152–61. http://dx.doi.org/10.1007/s40962-020-00442-1.

Full text

Abstract:

Abstract Because of its low cost, steel scrap is one of the most important raw materials for the production of ductile iron (DI). The amount of carbide-promoting elements in steel scrap, such as chromium, manganese, molybdenum, niobium and vanadium, is expected to increase in the future. Most of these elements have a negative impact on the microstructure and mechanical properties of DI. The solubility of carbide-promoting elements in solid solution-strengthened DI materials, standardized in DIN EN 1563:2011, is modified by the high silicon content. For these new materials, the tolerance limits

APA, Harvard, Vancouver, ISO, and other styles

22

Monschein, S., R. Schnitzer, R. Fluch, C. Turk, and C. Hofer. "Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel." Practical Metallography 58, no. 5 (2021): 264–81. http://dx.doi.org/10.1515/pm-2021-0019.

Full text

Abstract:

Abstract This work aimed at developing a methodology for examining the naturally grown passive layer of a thickness of just a few nanometers of an austenitic CrMnN steel by means of atom probe tomography and gaining knowledge on the structure of this alloy’s passive layer. The sample surface was ground, polished, cleaned, degreased, electrolytically polished, and oxidized in air to produce a reproducible passive layer. The oxide layer was subsequently coated with a silver layer of a thickness of 3 μm. The silver layer protects the oxide layer during the preparation of the atom probe tips in th

APA, Harvard, Vancouver, ISO, and other styles

23

Mazuro, Paweł, Julia Pieńkowska, and Ewa Rostek. "Influence of Various Heat Treatments on Hardness and Impact Strength of Uddeholm Balder: Cr-Mo-V-Ni Novel Steel Used for Engine Construction." Materials 14, no. 17 (2021): 4943. http://dx.doi.org/10.3390/ma14174943.

Full text

Abstract:

The construction of an engine requires optimized geometry and superb material properties in various environments. Tensile and yield strength are not the only parameters essential to consider. Hardness, impact toughness, and ductile-brittle transition temperature (DBTT) are also crucial. In this paper, Balder, Chromium-Molybdenum-Vanadium-Nickel steel with low impact toughness attested is considered. It contains both high Nickel and high Vanadium content, a rare combination among iron-based alloys. This study aims at proving that conventional heat treatment can improve its impact toughness whil

APA, Harvard, Vancouver, ISO, and other styles

24

Narahari Prasad, S., and M. Narayana Rao. "Stainless Steel - A Versatile Engineering Material for Critical Applications." Advanced Materials Research 794 (September 2013): 44–49. http://dx.doi.org/10.4028/www.scientific.net/amr.794.44.

Full text

Abstract:

Stainless Steel is a family of versatile materials that has been put into a wide variety of application by mankind. Stainless steels are iron-based alloys containing minimum 12% chromium and upto 25% nickel with minor additions of carbon, nitrogen, molybdenum, tungsten, titanium, niobium, copper and selenium. It has a wide range of applications from small pins to the construction of automobiles, petrochemical, space, aeronautical, ship building industries, nuclear and thermal power stations. Certain grades of stainless steels, because of their biocompatibility are used for manufacture of biome

APA, Harvard, Vancouver, ISO, and other styles

25

Chaudhuri, Phalguni, Manuela Winter, Karl Wieghardt, et al. "Syntheses and magnetic properties of a heteropolyoxotungsten(VI)iron(III) cation and [LFeIII(.mu.-MO4)3FeIIIL] complexes (M = chromium(VI), molybdenum(VI)). Crystal structures of L2Fe2(CrO4)3.cntdot.H2O and [L3Fe3W4O14(OCH3)3](ClO4)2.cntdot.0.5H2O (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)." Inorganic Chemistry 27, no. 9 (1988): 1564–69. http://dx.doi.org/10.1021/ic00282a011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

"Magnetic properties of sintered iron-chromium-molybdenum alloys." Metal Powder Report 52, no. 12 (1997): 40. http://dx.doi.org/10.1016/s0026-0657(97)88740-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

"Magnetic properties of sintered iron-chromium-molybdenum-silicon-phosphorus alloy." Metal Powder Report 54, no. 1 (1999): 37. http://dx.doi.org/10.1016/s0026-0657(99)80198-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

"PHYTHERM 230 and 260." Alloy Digest 65, no. 12 (2016). http://dx.doi.org/10.31399/asm.ad.fe0166.

Full text

Abstract:

Abstract Phytherm 230 is a 50 nickel, 10 chromium balance iron alloy, and Phytherm 260 is a 50 nickel, 9 chromium balance iron alloy. Both are soft magnetic alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming. Filing Code: Fe-166. Producer or source: Aperam Alloys Imphy.

APA, Harvard, Vancouver, ISO, and other styles

29

Miller, M. K., P. P. Camus, and M. G. Hetherington. "Atomic Level Characterization of the Morphology of Phases in Chromindur Magnetic Alloys." MRS Proceedings 232 (1991). http://dx.doi.org/10.1557/proc-232-59.

Full text

Abstract:

ABSTRACTThe atom probe field ion microscope has been used to characterize the morphology and determine the compositions of the iron-rich a and chromium-enriched α′ phases produced during isothermal and step cooled heat treatments in a Chromindur II ductile permanent magnet alloy. The good magnetic properties of this material are due to a combination of the composition of the two phases and the isolated nature and size of the ferromagnetic a phase. The morphology of the a phase is produced as a result of the shape of the miscibility gap and the step-cooled heat treatment and is distinctly diffe

APA, Harvard, Vancouver, ISO, and other styles

30

Doñate-Buendia, C., P. Kürnsteiner, F. Stern, et al. "Microstructure formation and mechanical properties of ODS steels built by Laser Additive Manufacturing of nanoparticle coated iron-chromium powders." Acta Materialia, December 2020, 116566. http://dx.doi.org/10.1016/j.actamat.2020.116566.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

"Magnetic properties of sintered iron-chromium alloy in alternating field." Metal Powder Report 53, no. 1 (1998): 37. http://dx.doi.org/10.1016/s0026-0657(97)89742-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

"CARPENTER WEAR RESISTANT HY MU 800A." Alloy Digest 37, no. 6 (1988). http://dx.doi.org/10.31399/asm.ad.ni0356.

Full text

Abstract:

Abstract CARPENTER Wear Resistant HY MU 800A is a nickel-iron-molybdenum soft magnetic alloy containing fine aluminum oxide particles for increased wear resistance as encountered in tape recorder heads. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on wear resistance as well as forming and heat treating. Filing Code: Ni-356. Producer or source: Carpenter.

APA, Harvard, Vancouver, ISO, and other styles

33

Lakshmanan, Ramji S., Rajesh Guntupalli, S. Huang, et al. "Magnetoelastic Material as a Biosensor for the Detection of Salmonella Typhimurium." MRS Proceedings 1129 (2008). http://dx.doi.org/10.1557/proc-1129-v02-04.

Full text

Abstract:

AbstractABSTRACT Magnetoelastic materials are amorphous, ferromagnetic alloys that usually include a combination of iron, nickel, molybdenum and boron. Magnetoelastic biosensors are mass sensitive devices comprised of a magnetoelastic material that serves as the transducer and bacteriophage as the bio-recognition element. By applying a time varying magnetic field, the magnetoelastic sensor thin films can be made to oscillate, with the fundamental resonant frequency of oscillations depends on the physical dimensions and properties of the material. The change in the resonance frequency of these

APA, Harvard, Vancouver, ISO, and other styles

34

"INCO ALLOY 020." Alloy Digest 37, no. 12 (1988). http://dx.doi.org/10.31399/asm.ad.ss0498.

Full text

Abstract:

Abstract INCO alloy 020 is an austenitic nickel-iron-chromium alloy. Its relatively high nickel content provides resistance to stress-corrosion cracking. Molybdenum gives the alloy good resistance to pitting and crevice corrosion; chromium makes it resistant to oxidation and niobium confers resistance to intergranular attack. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-498. Produc

APA, Harvard, Vancouver, ISO, and other styles

35

"INCO ALLOY G-3." Alloy Digest 35, no. 10 (1986). http://dx.doi.org/10.31399/asm.ad.ni0341.

Full text

Abstract:

Abstract INCO Alloy G-3 is a nickel-chromium-iron alloy with additions of molybdenum and copper. Some of the minor elements are controlled to provide increased resistance to weld heat-affected zone corrosion. The alloy has exceptional stress-corrosion cracking resistance in chloride-containing environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-341. Producer or source: lnco Alloys International.

APA, Harvard, Vancouver, ISO, and other styles

36

"INCOLOY ALLOY 825." Alloy Digest 37, no. 6 (1988). http://dx.doi.org/10.31399/asm.ad.ni0109.

Full text

Abstract:

Abstract INCOLOY alloy 825 is a nickel-chromium-iron alloy with additions of molybdenum, copper, and titanium. It is resistant to chloride-ion stress-corrosion cracking, to pitting and crevice attack, and to corrosion in both oxidizing and reducing media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-109. Producer or source: Inco Alloys International Inc.. Originally published

APA, Harvard, Vancouver, ISO, and other styles

37

CHAUDHURI, P., M. WINTER, K. WIEGHARDT та ін. "ChemInform Abstract: Syntheses and Magnetic Properties of a Heteropolyoxotungsten(VI)iron(III) Cation and (LFe(III)(μ-MO4)3Fe(III)L) Complexes (M: Chromium(VI), Molybdenum(VI)).Crystal Structures of L2Fe2(CrO4)3·H2O and (L3Fe3W4O14(OCH3)3)(ClO4)2·0.5H2O (". ChemInform 19, № 33 (1988). http://dx.doi.org/10.1002/chin.198833268.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!