Relevant bibliographies by topics / Chyby měření

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Chyby měření'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Chyby měření.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Chyby měření"

1

Uríča, Jozef. "Chyby v MRI metodách měření difúzních koeficientů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218553.

Full text
Abstract:
Diploma thesis Errors in MRI methods for measuring diffusion coefficients a study of measurement of diffusion NMR methods, specifies the location, causes, origination diffusion coefficients. The main function of the program is to simulate changes parameters measurement of diffusion coefficients and allows for example only one gradient or runs down gradient pulses.
APA, Harvard, Vancouver, ISO, and other styles
2

Januš, Petr. "Nejistoty měření dynamické viskozity." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219808.

Full text
Abstract:
The thesis is deal with measuring the temperature dependence of dynamic viscosity and the calculation of measurement uncertainties. The thesis writes up the physical nature of viscosity and rheological properties. Next it is write up an overview of possible methods for measuring viscosity of liquids and overview of methods for measuring the density of liquids. An important chapter is the statistical evaluation of measured data represented mainly measurement uncertainties. In the practical part of the work is done workplace for measure the temperature dependence of dynamic viscosity. It is used two methods of measuring viscosity of liquids and two samples of liquids. Finally is done statistical evaluations of measurement. Based on the calculated measurement uncertainty measurement methods are compared.
APA, Harvard, Vancouver, ISO, and other styles
3

Háněl, Petr. "Měření frekvenční stability oscilátorů v časové oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220360.

Full text
Abstract:
The thesis focuses on measurements of oscillators’ frequency stability. The theoretical part describes the basic concepts of measurement of frequency, measuring systems and measurement errors. The second part of thesis describes the design of measurement system. The design contains all data for build prototype and software, including all source codes.
APA, Harvard, Vancouver, ISO, and other styles
4

Schwarz, Jakub. "Kalibrace tlakoměrů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231426.

Full text
Abstract:
This diploma thesis is dealing with pressure measurement. It describes instruments dedicated to purpose - pressure gauges. Basic of correct pressure measurement is knowledge of behaviour of used pressure gauge. This knowledge is acquired by calibration. With calibration is associated also analysis of errors and uncertainty of measurement and creation of calibration list. Calibration takes place on model workspace pressure measuring in laboratory.
APA, Harvard, Vancouver, ISO, and other styles
5

Boštík, Ondřej. "Koaxiální multiplexer pro automatizované měření AC proudu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-240832.

Full text
Abstract:
Master’s thesis in the theoretical part deals with literature review on the topic of measurement errors and measurement uncertainties. The practical part deals with the simulation of additional capacitive and resistive load on the amplitude and phase error during shunts based measurement. For this simulation is used mathematical apparatus of cascade matrix of two-ports and their connections. For the actual simulation is used script for MATLAB. Furthermore, the work deals with the design of voltage follower to eliminate simulated errors and its practical realization. The last part deals with the design of the coaxial multiplexer for switching current shunts developed in the Czech Metrological Institute in Brno.
APA, Harvard, Vancouver, ISO, and other styles
6

Pokorný, Zdeněk. "Zpracování dat z měření na obráběcích strojích." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382195.

Full text
Abstract:
The Master’s thesis deals with the precision of machine tools, especially with the three-axis vertical milling machine. It is structurally divided into a theoretical and practical part. While the theoretical part focuses on problems of geometric errors and measuring devices, the practical one is devoted to the machine tool being tested. In this case, the data processing and the proposed statistical analysis are essential, and at the end of the thesis another possible way of developing the data processing is outlined.
APA, Harvard, Vancouver, ISO, and other styles
7

Sobotková, Kateřina. "Zvýšení efektivity kontroly ramene tankovací nádrže." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401062.

Full text
Abstract:
The diploma thesis consists of a new design of a controlling procedure for a plastic component of a tank. Its theoretical part deals with the potential sources of errors and uncertainties arising from the measuring itself. It also deals with the characteristics of available CMM devices and includes an analysis of the methods assessing the acceptability of the measurement plan. The practical part analyses systematically the current state and proposes a new solution using a program created using a coordinate machine. A comparison of both variants is presented as an output of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
8

Zimek, Alois. "Snímače střídavého a stejnosměrného proudu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217921.

Full text
Abstract:
The aim of this master’s thesis is to focus on analysis of a current transformer with feedback correction of measuring error, make an AC current sensor and verify its qualities experimentally. The measuring scale of this transformer is I = 0 to 100A, f = 50Hz.
APA, Harvard, Vancouver, ISO, and other styles
9

Dvořáček, Petr. "Evoluční návrh pro aproximaci obvodů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2015. http://www.nusl.cz/ntk/nusl-234958.

Full text
Abstract:
In recent years, there has been a strong need for the design of integrated  circuits showing low power consumption. It is possible to create intentionally approximate circuits which don't fully implement the specified logic behaviour, but exhibit improvements in term of area, delay and power consumption. These circuits can be used in many error resilient applications, especially in signal and image processing, computer graphics, computer vision and machine learning. This work describes an evolutionary approach to approximate design of arithmetic circuits and other more complex systems. This text presents a parallel calculation of a fitness function. The proposed method accelerated evaluation of 8-bit approximate multiplier 170 times in comparison with the common version. Evolved approximate circuits were used in different types of edge detectors.
APA, Harvard, Vancouver, ISO, and other styles
10

Bárta, Tomáš. "Nastavování resolveru, odhalování chyb na jednu otáčku a jejich praktické měření." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242129.

Full text
Abstract:
The goal of this thesis is create measuring station of resolver with using Analog Devices AD2S1210. The measuring station is based on the Atmel ATmega16 microprocesor and programmed in the C language. The measuring plant of resolvers to detection fault per one revolution is developed with industrial cooperation. The measuring station is made for a mobile use with onboard Pb accu. Measuring station will be used as a service device or in the manufacturing for setting the right angle of resolver on the engine. For the faults debugging of resolvers cables and other faults with the signal chain between the resolver and AD2S1210 is possible to show the SIN and COS signals on the external scope.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Chyby měření' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography