To see the other types of publications on this topic, follow the link: CIS solar cells.

Dissertations / Theses on the topic 'CIS solar cells'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'CIS solar cells.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Gunaicha, Purnaansh Prakash. "Optical Modeling of Solar Cells." University of Toledo / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1344815193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Panse, Pushkaraj. "Copper Gallium Diselenide Solar Cells: Processing, Characterization and Simulation Studies." [Tampa, Fla. : s.n.], 2003. http://purl.fcla.edu/fcla/etd/SFE0000080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jayaraman, Visweswaran. "Fabrication and Characterization of CIS/CdS and Cu2S/CdS Devices for Applications in Nano Structured Solar Cells." UKnowledge, 2005. http://uknowledge.uky.edu/gradschool_theses/267.

Full text
Abstract:
Nano structured solar cells provide an opportunity for increased open circuit voltages and and short circuit currents in solar cells due to quantum confinement of the window and absorber materials and an increase in the optical path length for the incident light. In this study, both bulk and nano heterojunctions of CIS/CdS and Cu2S/CdS devices have been fabricated and studied on plain glass substrates and inside porous alumina templates to compare their performance. The devices have also been characterized SEM, XRD and JV measurements. The J-V curves have also been analyzed for series resistan
APA, Harvard, Vancouver, ISO, and other styles
4

Pethe, Shirish. "Optimization Of The Two Stage Process For Cu(In,Ga)Se2 Solar Cells." Scholar Commons, 2004. https://scholarcommons.usf.edu/etd/1194.

Full text
Abstract:
Copper Indium Gallium DiSelenide absorber layers are fabricated using a two stage manufacturing friendly process. The first step involves the sequential deposition of Copper and Gallium and co-deposition of indium and selenium at 275oC. This is followed by the second stage where the substrate is annealed in the presence of Selenium and a thin layer of copper is deposited to neutralize the excess Indium and Gallium on the surface to form the CIGS absorber layer. The top copper thickness as well as the time of deposition was varied to study the effect of Copper on the performance of the cells. A
APA, Harvard, Vancouver, ISO, and other styles
5

Jayaraman, Visweswaran. "Fabrication and characterization of CIS/CdS and Cu₂S/CdS devices for applications in nano structured solar cells." Lexington, Ky. : [University of Kentucky Libraries], 2005. http://lib.uky.edu/ETD/ukyelen2005t00369/VJThesis.pdf.

Full text
Abstract:
Thesis (M.S.)--University of Kentucky, 2005.<br>Title from document title page (viewed on January 19, 2006). Document formatted into pages; contains: ix, 104 p. : ill. (some col.). Includes abstract and vita. Includes bibliographical references (p. 98-101).
APA, Harvard, Vancouver, ISO, and other styles
6

Kamal, Abdelhamied Saber Suzan. "Synthesis and characterization of some nano-selenides and their applications in solar cells." Doctoral thesis, Universitat Politècnica de València, 2018. http://hdl.handle.net/10251/107389.

Full text
Abstract:
Resumen (Castellano) El aumento del consumo de energía global junto con las preocupaciones ambientales ha generado mucho interés por las fuentes de energía alternativas y limpias, como la energía solar fotovoltaica. Los investigadores en la comunidad fotovoltaica han estado buscando formas de reducir costos mientras mantienen o aumentan las eficiencias. Una mejor comprensión de los materiales implicados es esencial para el rápido desarrollo de nuevas tecnologías. Las películas delgadas I-III-VI2 ofrecen sistemas prometedores para lograr células solares de alta eficiencia a un costo menor. De h
APA, Harvard, Vancouver, ISO, and other styles
7

Loni, E., A. Zolriasatein, and A. Shokuhfar. "Synthesis of Novel Nanoparticles by Using «Europium Instead of Indium in the Conventional CIS Composition for Photovoltaic Application»." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35300.

Full text
Abstract:
Eu has been placed instead of In in Cu-In-S2 which is used for CIS solar cells and effect of different capping agents on composition, size, distribution and morphology of the nanoparticles was investigated by scanning electron microscopy equipped with energy dispersive X-ray and transmission electron microscopy with the corresponding selected area electron diffraction pattern. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35300
APA, Harvard, Vancouver, ISO, and other styles
8

Carvalho, Fabrício de. "Efeito de alguns substituintes da 1,10-fenantrolina em corantes sensibilizadores do tipo cis-[Ru(R2-phen)(dcbH2)(NCS)2]." reponame:Repositório Institucional da UFABC, 2014.

Find full text
Abstract:
Orientador: Prof. Dr. André Sarto Polo<br>Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Ciência & Tecnologia - Química, 2014.<br>O trabalho desenvolvido teve como foco sintetizar compostos tris-heterolepticos de rutenio(II), o cis-[Ru(phen)(dcbH2)(NCS)2], o cis-[Ru(Me2-phen)(dcbH2)(NCS)2] e o cis-[Ru(Ph2-phen)(dcbH2)(NCS)2]. Estes compostos foram sintetizados pela rota one-pot que forneceu rendimentos superiores a 60%. A escolha dos substituintes nas posicoes 4 e 7 da fenantrolina foram feitas com o intuito de analisar o efeito causado por um grupo retirado
APA, Harvard, Vancouver, ISO, and other styles
9

Pan, Jie. "MATERIAL PROPERTY STUDY ON DYE SENSITIZED SOLAR CELLS AND CU(GA,IN)SE2 SOLAR CELLS." Miami University / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=miami1240594917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pan, Jie. "Material property study on dye sensitized solar cells and cu(ga,in)se2 solar cells." Oxford, Ohio : Miami University, 2008. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=miami1240594917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Rostvall, Fredrik. "Potential Induced Degradation of CIGS Solar Cells." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-227745.

Full text
Abstract:
This thesis studies the effects of Na diffusion in Cu(In,Ga)Se2 (CIGS) solar cells,caused by electrical Potential Induced Degradation (PID) and how to prevent it. Thiswas done by subjecting CIGS solar cells a temperature of 850C and an electrical biasfrom the backside of the glass substrate to the Mo back contact of the CIGS cell.When the bias was negative at the back contact the Na diffused in to the CIGS(degradation) and when it was positive the ions diffused out again (recovery). TheCIGS samples were electrically characterized with IV- and EQE-measurements duringthese conditions and composi
APA, Harvard, Vancouver, ISO, and other styles
12

Söderström, Wilhelm. "Alternative back contact for CIGS solar cells built on sodium-free substrates." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-154004.

Full text
Abstract:
It is widely known that the element sodium plays a vital role in providing highefficiency CIGS solar cells and that when cells are built on sodium free substrates theyneed an alternative (a substitute) sodium source. In this study a molybdenum-sodiumcompound has been deposited, investigated and evaluated as an alternative backcontact layer containing sodium. The compound had a 5 at % sodium concentrationand it was manufactured by an Austrian company called Plansee. The aim of the studywas to create an equivalent back contact in the sense of sodium delivery, conductivityand adhesion compared to
APA, Harvard, Vancouver, ISO, and other styles
13

Hetzer, Michael. "Chemical and Electronic Characterization of Copper Indium Gallium Diselenide Thin Film Solar Cells and Correlation of these Characteristics to Solar Cell Operation." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1235494047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Alnajjar, Abdalla A. A. "Single crystal CdS/CdTe:P solar cells." Thesis, Durham University, 1992. http://etheses.dur.ac.uk/1174/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Kumar, Bhaskar. "ZINC CADMIUM SULPHIDE AND ZINC SULPHIDE AS ALTERNATIVE HETEROJUNCTION PARTNERS FOR CIGS2 SOLAR CELLS." Master's thesis, University of Central Florida, 2007. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4052.

Full text
Abstract:
Devices with ZnCdS/ZnS heterojunction partner layer have shown better blue photon response due to higher band gap of these compounds as compared to devices with CdS heterojunction partner layer. CdS heterojunction partner layer has shown high photovoltaic conversion efficiencies with CIGS absorber layer while efficiencies are lower with CuIn1-xGaxS2 (CIGS2). A negative conduction band offset has been observed for CdS/CIGS2 as compared to near flat conduction band alignment in case of CdS/CIGS devices, which results in higher interface dominated recombination. Moreover, it has been predicted th
APA, Harvard, Vancouver, ISO, and other styles
16

McGregor, Stephen Mark. "Solar cells based on electrodeposited Cds and CdTe films." Thesis, Sheffield Hallam University, 1999. http://shura.shu.ac.uk/20043/.

Full text
Abstract:
The aim of this study was to understand the properties of glass/TCO/CdS/CdTe/metal solar cells, the CdS and CdTe being grown by aqueous electrodeposition. Deposited films and completed cells were characterised using electrical, structural and optical techniques. This report describes the production of well-formed polycrystalline CdS and CdTe with well defined XRD peaks and band gap. Experiments were performed to investigate the pre-conditioning of the CdTe bath on the overall cell performance. Pre-conditioning the CdTe deposition bath was found to improve the Voc value of the completed devices
APA, Harvard, Vancouver, ISO, and other styles
17

Paudel, Naba Raj. "Stability Issues in Sputtered CdS/CdTe Solar Cells." University of Toledo / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1321639226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Gutta, Venkatesh. "INVESTIGATIONS OF CuInTe2 / CdS & CdTe / CdS HETEROJUNCTION SOLAR CELLS." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_theses/654.

Full text
Abstract:
Thin film solar cells of Copper Indium Telluride and Cadmium Sulfide junctions were fabricated on plain ITO glass slides and also on those coated with intrinsic Tin Oxide. CdS was deposited through chemical bath deposition and CIT by electrodeposition. Both compounds were subjected to annealing at temperatures between 350°C and 500°C which produced more uniform film thicknesses and larger grain sizes. The CIT/ CdS junction was characterized after performing XRD and spectral absorption of individual compounds. Studies were also made on CdS / CdTe solar cells with respect to effect of annealing
APA, Harvard, Vancouver, ISO, and other styles
19

Sampathkumar, Manikandan. "Processing of Advanced Two-Stage CIGS Solar Cells." Scholar Commons, 2013. http://scholarcommons.usf.edu/etd/4938.

Full text
Abstract:
An advancement of the two stage growth recipe for the fabrication of CIGS solar cells was developed. The developed advancement was inconsistent in producing samples of similar stoichiometry. This was a huge barrier for up scaling the process as the behavior of devices would be different due to variation in stoichiometry. Samples with reproducible stoichiometry were obtained once the heating rate of elements, selenium in particular was better understood. This is mainly attributed to the exponential increase of selenium flux after its evaporation temperature. Monitoring the selenium flux was vit
APA, Harvard, Vancouver, ISO, and other styles
20

Faidah, Adel Saleh. "Screen printed layers of CdS for solar cells." Thesis, Durham University, 1988. http://etheses.dur.ac.uk/6599/.

Full text
Abstract:
It is generally accepted nowadays that a significant cost reduction in terrestrial solar cell application could be brought about by investigating alternative fabrication techniques for solar cells. It is believed that screen printing (or the so called thick film technique) is one such technique which promises a potentially low cost method for fabricating flexible, large area solar energy conversion cells. The active research on this technique started in 1976 in Japan. However, it was not until 1983, that wide interest developed when the Matsushita group in Japan reported an efficiency of 12.8%
APA, Harvard, Vancouver, ISO, and other styles
21

Mohanakrishnaswamy, Venkatesh. "Processing and characterization of CIGS - based solar cells." [Tampa, Fla.] : University of South Florida, 2004. http://purl.fcla.edu/fcla/etd/SFE0000368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

De, Abreu Mafalda Jorge Alexandre. "Advanced rear contact design for CIGS solar cells." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-257846.

Full text
Abstract:
The current trend concerning the thinning of solar cell devices is mainly motivated by economic aspects, such as the cost of the used rare-earth elements, and by the requirements of emergent technologies. The introduction of ultra-thin absorber layers results in a reduction of used materials and thus contributes to a more cost-effective and time-efficient production process.However, the use of absorber layers with thicknesses below 500nm gives rise to multiple apprehensions, including concerns regarding light management and the absorber’s quality.Therefore, this experimental work presents a no
APA, Harvard, Vancouver, ISO, and other styles
23

Hansson, Henrik. "Understanding interfaces in thin-film solar cells using photo electron spectroscopy. : Effect of post-deposition treatment on composition of the solar cell absorber." Thesis, Uppsala universitet, Institutionen för fysik och astronomi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-399623.

Full text
Abstract:
The increasing demand of renewable energy is the big driving force for the research and development of more efficient solar energy conversion solutions. Solar cells, which use the photovoltaic effect to convert the photon energy to electrical current, are an important solar energy conversion technique. One solar cell technology is thin-film solar cells. Thin-film solar cells use an absorption layer with a direct band gap. A direct band gap has the advantage that the photons will penetrate less deep until a photoexcitation occur compared to semiconductors with an indirect band gap (e.g. silicon
APA, Harvard, Vancouver, ISO, and other styles
24

Forsyth, Nicola M. "A study of Schottky barriers to CdS, and the CdTe : CdS heterojunction." Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.375956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Chou, Hengchang. "Efficiency limiting defects and mechanisms in CdTe/CdS heterojunction solar cells." Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/14897.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Tetali, Bhaskar Reddy. "Stability studies of CdTe/CdS thin film solar cells." [Tampa, Fla.] : University of South Florida, 2005. http://purl.fcla.edu/fcla/etd/SFE0001135.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Painter, J. D. "Recrystallisation and interdiffusion in CdTe-CdS heterojunction solar cells." Thesis, Cranfield University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.508015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Cousins, Michael Andrew. "Microstructure of absorber layers in CdTe/Cds solar cells." Thesis, Durham University, 2001. http://etheses.dur.ac.uk/4266/.

Full text
Abstract:
This work concerns the microstructure of CSS-grown CdTe layers used for CdTe/CdS solar cells. Particular attention is given to how the development of microstructure on annealing with CdCl(_2) may correlate with increases in efficiency. By annealing pressed pellets of bulk CdTe powder, it is shown that microstructural change does occur on heating the material, enhanced by the inclusion of CdCl(_2) flux. However, the temperature required to cause significant effects is demonstrated to be higher than that at which heavy oxidation takes place. The dynamics of this oxidation are also examined. To i
APA, Harvard, Vancouver, ISO, and other styles
29

Al-Dhafiri, Abdullah M. "CdS-CuₓS single crystal and thin film solar cells". Thesis, Durham University, 1988. http://etheses.dur.ac.uk/6617/.

Full text
Abstract:
The work presented in this thesis is concerned with photovoltaic cells formed by plating CdS single crystals and thin films, and Cd(_y) Zn(1 _ y)S single crystals, with copper sulphide. An electroplating technique has been used to control the phase of copper sulphide by changing the electric field during its formation. Different phases of Cu(_x)S have been identified directly using Reflection High Energy Diffraction (RHEED), and indirectly from spectral response measurements. A dramatic change in the spectral response accompanying the reduction in the covellite response associated with an incr
APA, Harvard, Vancouver, ISO, and other styles
30

Edwards, Paul Roger. "Beam-induced current studies of CdTe/Cds solar cells." Thesis, Durham University, 1999. http://etheses.dur.ac.uk/1109/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Daume, Felix. "Degradation of Flexible Cu(In,Ga)Se2 Solar Cells." Doctoral thesis, Universitätsbibliothek Leipzig, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-189708.

Full text
Abstract:
Untersuchungsgegenstand dieser Arbeit ist die Degradation flexibler Dünnschichtsolarzellen auf Basis von Cu(In,Ga)Se2 Absorbern. Zur beschleunigten Alterung unter Laborbedingungen wurden unverkapselte Solarzellen in Klimaschränken Wärme und Feuchte ausgesetzt. Die Auswirkungen von Wärme und Feuchte auf die Solarzellen wurden zunächst durch Messung von Strom–Spannungs–Kennlinien (IV) und Kapazitäts–Spannungs–Charakteristiken (CV) erschlossen. Mittels in–situ Messungen der IV–Kennlinien der Solarzellen unter Wärme und Feuchte konnte die Degradationskinetik untersucht werden. Es gelang zwei Phase
APA, Harvard, Vancouver, ISO, and other styles
32

Motahari, Sara. "Surface Passivation of CIGS Solar Cells by Atomic Layer Deposition." Thesis, KTH, Kraft- och värmeteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-127430.

Full text
Abstract:
Thin film solar cells, such as Cu(In,Ga)Se2, have a large potential for cost reductions, due to their reduced material consumption. However, the lack in commercial success of thin film solar cells can be explained by lower efficiency compared to wafer-based solar cells. In this work, we have investigated the aluminum oxide as a passivation layer to reduce recombination losses in Cu(In,Ga)Se2 solar cells to increase their efficiency. Aluminum oxides have been deposited using spatial atomic layer deposition. Blistering caused by post-deposition annealing of thick enough alumina layer was suggest
APA, Harvard, Vancouver, ISO, and other styles
33

Gečys, Paulius. "Ultrashort pulsed laser processing of thin-films for solar cells." Doctoral thesis, Lithuanian Academic Libraries Network (LABT), 2012. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2012~D_20121001_093555-45841.

Full text
Abstract:
Present PhD thesis is the experimental and theoretical analysis of thin layer ultrashort pulsed laser ablation processes for photovoltaic devices. Experimental work was supported by modeling and simulation of energy coupling and dissipation inside the layers. The absorbed laser energy was transformed to localized transient heating inside the structure. Selectiveness of the ablation process was defined by optical and mechanical properties of the materials, and selection of the laser wavelength facilitated control of the structuring process. The 1064 nm wavelength was found optimal for the CIGS
APA, Harvard, Vancouver, ISO, and other styles
34

Wätjen, Jörn Timo. "Microscopic Characterisation of Solar Cells : An Electron Microscopy Study of Cu(In,Ga)Se2 and Cu2ZnSn(S,Se)4 Solar Cells." Doctoral thesis, Uppsala universitet, Fasta tillståndets elektronik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-199432.

Full text
Abstract:
The sun provides us with a surplus of energy convertible to electricity using solar cells. This thesis focuses on solar cells based on chalcopyrite (CIGSe) as well as kesterite (CZTS(e)) absorber layers. These materials yield record efficiencies of 20.4 % and 11.1 %, respectively. Especially for CZTS(e), the absorber layers often do not consist of one single desired phase but can exhibit areas with deviating material properties, referred to as secondary phases. Furthermore, several material layers are required for a working solar cell, each exhibiting interfaces. Even though secondary phases a
APA, Harvard, Vancouver, ISO, and other styles
35

Bouich, Amal. "Study and Characterization of Hybrid Perovskites and Copper-Indium-Gallium Selenide thin films for Tandem Solar Cells." Doctoral thesis, Universitat Politècnica de València, 2021. http://hdl.handle.net/10251/160621.

Full text
Abstract:
[ES] El objetivo principal de esta tesis es contribuir al avance de nuevas técnicas de elaboración con bajo coste, utilizando materiales tipo de cobre, indio, galio y selenio CIGS y Perovskita para aplicaciones en energía solar fotovoltaica. CIGS parecen ser adecuadas ya que son de bajo costo de producción y se han reportado eficiencias de conversión del 23,35%. Por otro lado, las perovskitas híbridas de haluros de plomo orgánicos-inorgánicos han aparecido como nuevos materiales excepcionales para celdas solares, especialmente porque la eficiencia de las celdas solares basadas en perovskita ha
APA, Harvard, Vancouver, ISO, and other styles
36

Plotnikov, Victor. "Fabrication of ultra thin CdS/CdTe solar cells by magnetron sputtering." University of Toledo / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1249913360.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Hedlund, Daniel. "Ammonia free CdS buffer layerfor Cu(In,Ga)Se2 solar cells by chemical bath deposition." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-206786.

Full text
Abstract:
The buffer layer in Cu(In,Ga)Se2 solar cells can improve cell performance. In this work we make CdS buffer layer by chemical bath deposition (CBD) without ammonia. CBD without ammonia were sought out since ammonia is a volatile compound. Different recipes for making CdS were tested; only one of the tested recipes actually produced something that is worth further investigating. This recipe used sodium citrate, an innocuous compound instead of ammonia. The best performance was 0.15 % off from the reference.This is almost as good as the used baseline process. However the worst almost completely k
APA, Harvard, Vancouver, ISO, and other styles
38

Bhatti, Muhammad Tariq. "A novel method of production of CdS/CdTe thin film solar cells." Thesis, Northumbria University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356984.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Danylov, A. B. "Reflection Spectra Simulation for Flat and Patterned Surfaces of CdTe Solar Elements." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42713.

Full text
Abstract:
The paper comprises the simulation of light total reflection from solar element multilayered structure. For CdTe solar cell the analysis of optical losses in two different types of solar cells with indium tin oxide and zinc oxide as transparent upper contact (with glass superstrate and without it) is performed. The effect of glass superstrate in the elements is discussed and spectral dependences for reflectance in plain layer structure are built. For textured surfaces of solar element layer the comparison of influence of different types of texture on total light reflection is carried out.
APA, Harvard, Vancouver, ISO, and other styles
40

Malm, Ulf. "Modelling and Degradation Characteristics of Thin-film CIGS Solar Cells." Doctoral thesis, Uppsala University, Solid State Electronics, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9291.

Full text
Abstract:
<p>Thin-film solar cells based around the absorber material CuIn<sub>1-x</sub>Ga<sub>x</sub>Se<sub>2</sub> (CIGS) are studied with respect to their stability characteristics, and different ways of modelling device operation are investigated. Two ways of modelling spatial inhomogeneities are detailed, one fully numerical and one hybrid model. In the numerical model, thin-film solar cells with randomized parameter variations are simulated showing how the voltage decreases with increasing material inhomogeneities.</p><p>With the hybrid model, an analytical model for the p-n junction action is use
APA, Harvard, Vancouver, ISO, and other styles
41

Palekis, Vasilios. "CdTe/CdS Thin Film Solar Cells Fabricated on Flexible Substrates." Scholar Commons, 2011. http://scholarcommons.usf.edu/etd/3280.

Full text
Abstract:
Cadmium Telluride (CdTe) is a leading thin film photovoltaic (PV) material due to its near ideal bandgap of 1.45 eV and its high optical absorption coefficient. The typical CdTe thin film solar cell is of the superstrate configuration where a window layer (CdS), the absorber (CdTe) and a back contact are deposited onto glass coated with a transparent electrode. Substrate CdTe solar cells where the above listed films are deposited in reverse are not common. In this study substrate CdTe solar cells are fabricated on flexible foils. The properties of the Molybdenum back contact, Zinc Telluride (Z
APA, Harvard, Vancouver, ISO, and other styles
42

Alamri, Saleh Naeeman O. "Preparation and characterisation of thin film CdS/CdTe solar cells produced by close space sublimation." Thesis, Durham University, 1999. http://etheses.dur.ac.uk/1139/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Ullah, Shafi. "THIN FILM SOLAR CELLS BASED ON COPPER-INDIUMGALIUM SELENIDE (CIGS) MATERIALS DEPOSITED BY ELECTROCHEMICAL TECHNIQUES." Doctoral thesis, Universitat Politècnica de València, 2017. http://hdl.handle.net/10251/86290.

Full text
Abstract:
The improvement of low cost, efficient photovoltaic devices is a leading technological challenge in the recent decade. There is a need to develop scalable and high-throughput manufacturing techniques that could reduce costs and improve manufacturing of chalcogenide solar cells. Copper, indium, gallium, and selenium (CIGS) Thin films polycrystalline heterojunction solar cells appear to be most appropriate with to cost and ease of manufacture. Currently Cu (In,Ga) (Se, S)2 materials hold the highest record cell efficiency of 22.3% in laboratory scale for thin films solar cells and the efficiency
APA, Harvard, Vancouver, ISO, and other styles
44

Larsson, Fredrik. "Study of CVD deposited i-ZnO layers in CIGS thin film solar cells." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-253685.

Full text
Abstract:
CIGS thin film solar cells usually include a thin layer of intrinsic zinc oxide (i-ZnO) deposited on a CdS buffer layer by sputtering. However an interest has grown in using chemical vapor deposition (CVD) instead. Hence, the aim of this thesis was to study how well CVD i-ZnO performs on a CdS buffer layer in a CIGS solar cell and how the properties of the layer can be controlled when using a hot-wall CVD reactor with diethylzinc and water as precursors. The process was characterized through depositions on glass substrates and was then successfully implemented in solar cell devices. The main i
APA, Harvard, Vancouver, ISO, and other styles
45

Hariri, Abdul Kader. "Structural and electrical characteristics of CdS-Cu2S thin film solar cells." Thesis, University of Hull, 1985. http://hydra.hull.ac.uk/resources/hull:4707.

Full text
Abstract:
A study has been made of a variety of factors influencing the efficiency and operational stability of front-wall CdS-Cu2S solar cells. In the course of this work -1 cm2 cells were fabricated with conversion efficiency of up to 8% without attempting to reduce reflection losses.The CdS films were produced by vacuum evaporation and the electrical and structural characteristics of these films were studied as a function of the rate and temperature of the deposition. Previously there had been some controversy concerning the nature of the CdS source material required for fabricating high performance
APA, Harvard, Vancouver, ISO, and other styles
46

Samett, Amelia. "Sustainable Manufacturing of CIGS Solar Cells for Implementation on Electric Vehicles." Case Western Reserve University School of Graduate Studies / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=case1591380591637557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Bapanapalli, Srilatha. "Cds/cdte thin film solar cells with zinc stannate buffer layer." [Tampa, Fla.] : University of South Florida, 2005. http://purl.fcla.edu/fcla/etd/SFE0001004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Muthalagappan, Narayanan. "Correlation of PID with other Reliability Tests for CIGS Solar Cells." Thesis, Högskolan Dalarna, Energi och miljöteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:du-16469.

Full text
Abstract:
With solar photovoltaic plants getting larger and larger, the balance in the system is getting important. Balance of the system is necessary to get the maximum power from the system by arranging its components in an optimal way. With PV systems having high DC voltages of up to 600V in USA and 1000V in Europe, the high voltage stress induced in the system is a lot. One of the effects created due to an imbalance in the system is the Potential Induced Degradation. Previous researchers have found out that the Potential Induced Degradation (PID) is due to the voltage imbalance in the string (a sche
APA, Harvard, Vancouver, ISO, and other styles
49

Lotse, Henrik. "Electrical analysis of interface recombination of thin-film CIGS solar cells." Thesis, Uppsala universitet, Institutionen för fysik och astronomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-426324.

Full text
Abstract:
In this master thesis, electrical characterization of thin film CuInxGa(1−x)Se2 solar cells produced by Midsummer AB were performed with the aim of determining the dominant recombination path of these cells. Current-Voltage (IV), Quantum Effinciency (QE), temperature dependent IV (IVT) and Drive-Level Capacitance Profiling (DLCP) was used with the objective to investigate the dominant recombination path as well as provide some insight of the solar cells in order to create a baseline model using the modelling software SCAPS (Solar cell CAPacitance Simulator). The IV produced mostly consistent r
APA, Harvard, Vancouver, ISO, and other styles
50

Fauzi, Fijay Bin. "Research and development of CdS/CdTe solar cells incorporating ZnTe layers." Thesis, Sheffield Hallam University, 2015. http://shura.shu.ac.uk/19643/.

Full text
Abstract:
This thesis presents experimental work and analysis in research and development of low-cost thin film solar cells. In this work, three semiconducting materials were studied. These semiconducting materials are from group II-VI or also known as 'two-sixers' from periodic table. The semiconductors are cadmium sulfide (CdS), cadmium telluride (CdTe) and zinc telluride (ZnTe).All of these layers were obtained by growing them using electrodeposition in aqueous solutions. In this project, electrodeposition using 2-electrode system was employed to deposit all of the semiconductors. The decision was ta
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!