To see the other types of publications on this topic, follow the link: Civil Condition.

Dissertations / Theses on the topic 'Civil Condition'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Civil Condition.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Lagnebäck, Robert. "Evaluation of wayside condition monitoring technologies for condition-based maintenance of railway vehicles." Licentiate thesis, Luleå tekniska universitet, Drift, underhåll och akustik, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-18158.

Full text
Abstract:
Luossavaara-Kiirunavaara AB (LKAB) is an iron ore mining company in Sweden that strives to be one of the leading suppliers of iron ore products. In the chain from mining to end customers, transportation efficiency plays a mayor role in the outcome of the company's total financial result. The transportation of the ore from the LKAB mines in Kiruna and Malmberget is made by trains to the harbors in Narvik and Luleå. The railway transportations are made by LKAB subsidiaries Malmtrafik i Kiruna AB (MTAB) on the Swedish side and Malmtrafikk AS (MTAS) on the Norwegian side. The efficiency of the rai
APA, Harvard, Vancouver, ISO, and other styles
2

Williams, Stephen Michael. "The condition monitoring of damaged steel structures." Thesis, University of Bristol, 1997. http://hdl.handle.net/1983/1e269816-fae1-4ffc-9b7b-75ba997377b6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Taverna, Frank Peter III. "Asphalt and Concrete Pavement Condition Analysis for the WVDOH." Thesis, West Virginia University, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=1588150.

Full text
Abstract:
<p>The objective of this research was to compare the condition of the asphalt and concrete sections of pavement on a section of US 35 for the West Virginia Division of Highways. In the process of completing this objective, existing procedures for pavement assessment were evaluated and an improved methodology for pavement condition evaluation, in terms of Pavement Surface Rating, PSR, was established. PSR uses observable surface distresses to quantify the condition of a pavement on a 0 to 100 scale. The PSR methodology includes surface distress data collection, a distress identification manu
APA, Harvard, Vancouver, ISO, and other styles
4

Halabe, Udaya Bhatta. "Condition assessment of reinforced concrete structures using electromagnetic waves." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/14245.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bayissa, Wirtu Lemessa. "Damage identification and condition assessment of civil engineering structures through response measurement /." Connect to thesis, 2007. http://eprints.unimelb.edu.au/archive/00003631.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Munteanu, Adrian. "Scouring around a cylindrical bridge pier under partially ice-covered flow condition." Thesis, University of Ottawa (Canada), 2004. http://hdl.handle.net/10393/26722.

Full text
Abstract:
This thesis reports on the first step of an ongoing study of scouring around a cylindrical bridge pier under ice-cover conditions. Previous research confirmed that sediment transport decreases in ice-covered flow compared to free-surface flow. However, most of that research was conducted in a flow depth adjustment condition, maintaining constant the energy slope for both the ice-covered and the free-surface flow. This represents a valid hypothesis when an appropriate length scale is considered (i.e. long river reaches), but numerous other phenomena must be analyzed at a much shorter length sca
APA, Harvard, Vancouver, ISO, and other styles
7

Chalishajar, Nirajkumar. "Condition assessment of concrete bridge girders using modal testing - a preliminary study." Thesis, McGill University, 2009. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=67040.

Full text
Abstract:
This thesis deals with vibration frequency evaluation using non-destructive modal testing of beam-type structures. The current state of Canada's bridges is reviewed for its present condition and urgent needs. The basic modes of deterioration in concrete bridges, namely, corrosion of reinforcing steel and freezing and thawing cycles were also reviewed. Bridge inspection fundamentals are discussed summarily. In addition, a summary of the available research on modal testing is presented. Five reinforced concrete beams were tested in this preliminary research program to study the effec
APA, Harvard, Vancouver, ISO, and other styles
8

Yu, Tzu-Yang (Tzu-Yang Young) 1973. "Condition assessment of GFRP-retrofitted concrete cylinders using electromagnetic waves." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/43749.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2008.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Includes bibliographical references (p. 343-370).<br>The objective of this study is to develop an integrated nondestructive testing (NDT) capability, termed FAR NDT (Far-field Airborne Radar NDT), for the detection of defects, damages, and rebars in the near-surface region of glass fiber reinforced polymer (GFRP)-retrofitted concrete cyl
APA, Harvard, Vancouver, ISO, and other styles
9

Azar, Lawrence 1973. "Ultrasonic phased arrays of the condition assessment of concrete structures." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/50432.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 1998.<br>Vita.<br>Includes bibliographical references (leaves 107-112).<br>by Lawrence Azar.<br>S.M.
APA, Harvard, Vancouver, ISO, and other styles
10

Sun, Jun. "Condition monitoring by acoustic emission and electrostatic technologies." Thesis, University of Southampton, 2007. https://eprints.soton.ac.uk/64797/.

Full text
Abstract:
The increasing demands made on operational availability and reliability of machinery requires the adoption of innovative methods to assess the machine’s current condition and predict its condition in future. Rapid advances in the design and working condition of mechanical systems in industrial, aerospace and military equipment over the years have resulted in the ever-increasing complexity of problems encountered in the management of their maintenance. The ability to monitor the performance of machinery components in terms of wear and durability is extremely invaluable. Thus, it is essential to
APA, Harvard, Vancouver, ISO, and other styles
11

Sipos, Cristian. "GIS-inventory and condition rating of water supply system at McGill Downtown Campus." Thesis, McGill University, 2011. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=103614.

Full text
Abstract:
The research project presents a framework for developing a detailed Geographic Information System (GIS) inventory and condition rating of the water supply system at McGill Downtown Campus (MDC), based on the previous work by Sipos (2006), and Sipos and Mirza (2008). The GIS, consisting of a comprehensive geo-referenced base-map with the water supply system and other infrastructure features at MDC, was developed employing a Bentley software platform. Several non-destructive evaluation (NDE) tests were performed for detection, location and condition assessment of the water supply system at MDC.
APA, Harvard, Vancouver, ISO, and other styles
12

Kay, Sean. "Concrete surface coatings and the influence of substrate moisture condition on bond strength." Master's thesis, University of Cape Town, 2016. http://hdl.handle.net/11427/20924.

Full text
Abstract:
Concrete structures, in particular reinforced concrete structures, have been designed and built for many years. Many previously built structures are now being compromised with regard to their condition and structural integrity. There has developed a need to maintain these structures and protect them in order to protect the users and minimise the expenses associated with repair and maintenance. Instead of resorting to demolishing and rebuilding, engineers are becoming increasingly capable of restoring and enhancing existing structures in order to maximise the original structures lifespan. One o
APA, Harvard, Vancouver, ISO, and other styles
13

Wooldridge, Stephen C. (Stephen Craig) 1967. "Balancing capital and condition : an emerging approach to facility investment strategy." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/16798.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, February 2002.<br>Includes bibliographical references (p. 145-152).<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Capital facilities - land and buildings - provide a long-standing environment in which public and private enterprise works, communicates, and thrives. Aligning how facilities "fit" with the dynamic demands of enterprise necessitates continual investment in maintenance, moderni
APA, Harvard, Vancouver, ISO, and other styles
14

Sipos, Cristian. "Inventory, condition assessment and diagnosis water supply and sewage systems." Thesis, McGill University, 2006. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=99539.

Full text
Abstract:
This project describes a methodology for developing a digitized GIS-based inventory of underground municipal utilities, and recommends an approach for developing a database, which will assist with considerably improved management of buried systems and effective use of limited available resources. The study also discusses the water and sewer infrastructure debt and the total infrastructure debt in Canada. Some other issues related to the Canadian water infrastructure, such as water pricing and consumption patterns, along with the deterioration mechanisms of the underground services, are also di
APA, Harvard, Vancouver, ISO, and other styles
15

Sztendel, Sebastian. "Model referenced condition monitoring of high performance CNC machine tools." Thesis, University of Huddersfield, 2016. http://eprints.hud.ac.uk/id/eprint/34112/.

Full text
Abstract:
Generally, machine tool monitoring is the prediction of the system’s health based on signal acquisition and processing and classification in order to identify the causes of the problem. The producers of machine tools need to pay more attention to their products life cycle because their customers increasingly focus on machine tool reliability and costs. The present study is concerned with the development of a condition monitoring system for high speed Computer Numerical Control (CNC) milling machine tools. A model is a simplification of a real machine to visualize the dynamics of a mechatronic
APA, Harvard, Vancouver, ISO, and other styles
16

Berglund, Filip. "Structural analysis and condition monitoring of grinding mills : a case study." Licentiate thesis, Luleå tekniska universitet, Drift, underhåll och akustik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-26441.

Full text
Abstract:
Grinding mills are large rotating cylindrical steel vessels used to grind ore and minerals into finer particles. The mills are important parts of the mineral enrichment process and the grinding is the last step of the comminution process, where the particle size is reduced by a combination of abrasion and impact.The rotation of the mill under loaded conditions can result in fatigue cracks. Fatigue cracks and associated failures have been identified as a major problem in mineral processing plants. The cracks lead to unpredicted and unplanned production stoppages for inspections and for repair a
APA, Harvard, Vancouver, ISO, and other styles
17

Hellgren, Rikard. "Condition assessment of concrete dams in cold climate." Licentiate thesis, KTH, Betongbyggnad, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-259719.

Full text
Abstract:
Dams in many countries are approaching their expected service life. Proper assessment of the aging dams structural health increase the knowledge of the current safety, and allow for better planning of renovation and rebuilding investments. The behavior of concrete dams is, to a great extent, governed by the ambient variation in temperature and water level. In cold regions, the ice sheet formed in the reservoir may subject a pressure load on the dams. Theoretically, this load has a significant impact on the structural behavior of dams. Despite this, the maximum magnitude, as well as the seasona
APA, Harvard, Vancouver, ISO, and other styles
18

Ciliberti, Alessio. "Condition assessment of bridges using monitoring data." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Find full text
Abstract:
In the last years, significant interest has been vested in the possibility of using Structural health monitoring (SHM) as a standardized tool in bridge engineering. Structural Health Monitoring is an emerging field in engineering that gathers together several techniques such as structural dynamics, materials, signal processing, or microelectronics. Sensors, data, and simulation tools come together under the umbrella of SHM to offer - at every moment during the life of a structure - a diagnosis of its health and prognosis of its remaining life. This thesis has been developed within the group
APA, Harvard, Vancouver, ISO, and other styles
19

Humplick, Frannie Frank. "Theory and methods of analyzing infrastructure inspection output : application to highway pavement surface condition evaluation." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/14246.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Zheng, Kougen. "Application of the Wigner distribution to monitoring cutting tool condition." Thesis, University of Warwick, 1992. http://wrap.warwick.ac.uk/56557/.

Full text
Abstract:
This thesis is about the application of the Wigner distribution to cutting tool monitoring and control. After reviewing traditional methods, a new method is proposed. This is to regard the surface texture and geometric error of form of a machined workpiece as the fingerprint of a cutting process, to analyse it, and to extract cutting tool vibration information from it, which can then be used for cutting tool monitoring. In order to analyse the surface texture effectively, three analysing tools, i.e. the Fourier transform, the ambiguity function, the Wigner distribution (WD), are examined and c
APA, Harvard, Vancouver, ISO, and other styles
21

Chen, Su Liang. "Development of automated bearing condition monitoring using artificial intelligence techniques." Thesis, University of Southampton, 2009. https://eprints.soton.ac.uk/195557/.

Full text
Abstract:
A recent series of tapered roller bearing tests have been conducted at the University of Southampton to evaluate the effectiveness of using multiple sensing technologies to detect incipient faults. The test rig was instrumented with on-line sensors including vibration, temperature and electrostatic wear and oil-line debris sensors. Off-line techniques were also used such as debris analysis and bearing surface examination. The electrostatic sensors, in particular, have the potential to detect early decay of tribological contacts within rolling element bearings. These sensors have the unique abi
APA, Harvard, Vancouver, ISO, and other styles
22

Banijamali, Bahareh. "Development of a flow-condition-based interpolation 9-node element for incompressible flows." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/34642.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2006.<br>Includes bibliographical references.<br>The Navier-Stokes equations are widely used for the analysis of incompressible laminar flows. If the Reynolds number is increased to certain values, oscillations appear in the finite element solution of the Navier-Stokes equations. In order to solve for high Reynolds number flows and avoid the oscillations, one technique is to use the flow condition-based interpolation scheme (FCBI), which is a hybrid of the finite element and the finite volume
APA, Harvard, Vancouver, ISO, and other styles
23

Asplund, Matthias. "Wayside Condition Monitoring System for Railway Wheel Profiles : Applications and Performance Assessment." Doctoral thesis, Luleå tekniska universitet, Drift, underhåll och akustik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-60146.

Full text
Abstract:
The railway is an important mode of transport, due to its environmental friendliness, high safety level, and low energy consumption combined with a high transport capacity, among other factors. The Swedish railway network is old, there has been almost no expansion of the network during the past few decades, and more traffic is expected. Therefore, there is currently a demand for more track capacity and, in the short term, the existing network is expected to deliver the increased capacity. The railway operators in the network have a large impact on train delays, and wheel failures are one large
APA, Harvard, Vancouver, ISO, and other styles
24

Al-Arbi, Salem. "Condition monitoring of gear systems using vibration analysis." Thesis, University of Huddersfield, 2012. http://eprints.hud.ac.uk/id/eprint/17821/.

Full text
Abstract:
It is often impractical to measure vibrations directly at /or close to their sources when condition monitoring gearbox systems. It is common to measure the vibration distant from the source due to limited access to the component which is to be monitored. In addition, operating the gearbox under different loads and speeds also produces vibration signals within different components. Vibration measured in this way may be significantly distorted by the effect of signal transmission paths and interference from other sources. Therefore, suppression of distortions is a key issue for remote measuremen
APA, Harvard, Vancouver, ISO, and other styles
25

Unruh, Richard Cornelius 1974. "The use of nondestructive testing methods for the condition assessment of concrete bridge girders." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/29420.

Full text
Abstract:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2004.<br>Includes bibliographical references (p. 68-72).<br>There are over 594,000 publicly controlled bridges in the United States. Concrete and pre-stressed concrete bridges account for nearly 50% of the bridges in the US inventory. This proportion is increasing each year, as new bridges tend to be constructed of concrete. This trend makes it vital for engineers to be able to accurately assess the condition of concrete for maintenance and repair decisions. The use of nondestructive testing
APA, Harvard, Vancouver, ISO, and other styles
26

Mehta, Jay. "Rigid pavement condition evaluation using dynaflect and falling weight deflectometer measurements." Ohio : Ohio University, 1990. http://www.ohiolink.edu/etd/view.cgi?ohiou1183652762.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Wang, W. "Modelling condition monitoring inspection using the delay-time concept." Thesis, University of Salford, 1992. http://usir.salford.ac.uk/2156/.

Full text
Abstract:
In the literature on inspection modelling, the failure distribution traditionally plays a fundamental role in model construction in that it is assumed that system failures occur instantly at random time points from new with a known pdf. of time to failure. Numerous models have been built on this basis. However, Professor Christer challenged this traditional idea and proposed the concept of delay time. The idea, which is an essential part of most engineers' experience, assumes that defects do not just appear as failures, but are present for a while before becoming sufficiently obvious to be not
APA, Harvard, Vancouver, ISO, and other styles
28

Chang, Jiang. "Applying two statistical models to condition-based machinery inspection and maintenance : railroad car truck case." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/36993.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Ma, Qian. "Condition-based maintenance applied to rail freight car components : the case of rail car trucks." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/42621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Hafiz, Ali. "Evaluation of Low and High Frequency Dynamic Response for Condition Assessment of Reinforced Concrete Structures." PDXScholar, 2019. https://pdxscholar.library.pdx.edu/open_access_etds/5122.

Full text
Abstract:
Concrete is widely used for civil infrastructure structures and they experience deterioration and degradation due to aging, increases in the traffic loads, harsher environmental conditions, use of deicing chemicals, etc. Therefore, evaluating the integrity of reinforced concrete structures has become of increasing interest for infrastructure owners and managers. A number of non-destructive testing (NDT) and structural health monitoring (SHM) methods have been developed in recent decades to aid in evaluating structures and provide input for asset management. One family of these methods uses the
APA, Harvard, Vancouver, ISO, and other styles
31

Wang, Xiaoyi. "Structural Condition Assessment of Steel Stringer Highway Bridges." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1115351511.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Towsyfyan, Hossein. "Investigation of the nonlinear tribological behaviour of mechanical seals for online condition monitoring." Thesis, University of Huddersfield, 2017. http://eprints.hud.ac.uk/id/eprint/34340/.

Full text
Abstract:
Mechanical seals have increasingly been used for sealing rotating shafts in centrifugal pumps, propeller shafts in ships and submarines, compressors, liquid propellant rocket motors in aerospace industry, pumps, turbines, mixers and many other rotating machines during last two decades. Abnormal operating conditions in the mechanical seals will degrade machine performance, increase operating cost and may cause unexpected sudden failures which are dangerous in both engineering and safety terms. Hence it is necessary to investigate the tribological behaviour of mechanical seals operating based on
APA, Harvard, Vancouver, ISO, and other styles
33

Yu, Jianxiong. "Pavement Service Life Estimation And Condition Prediction." See Full Text at OhioLINK ETD Center (Requires Adobe Acrobat Reader for viewing), 2005. http://www.ohiolink.edu/etd/view.cgi?toledo1132896646.

Full text
Abstract:
Dissertation (Ph.D.)--University of Toledo, 2005.<br>Typescript. "A dissertation [submitted] as partial fulfillment of the requirements of the Doctor of Philosophy degree in Engineering." Bibliography: leaves 69-74.
APA, Harvard, Vancouver, ISO, and other styles
34

Granström, Rikard. "Maintenance for improved punctuality : a study of condition monitoring technology for the Swedish railway sector." Licentiate thesis, Luleå, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25769.

Full text
Abstract:
Banverket (‘the National Swedish Railway Administration') is responsible for management of the infrastructure in Sweden. The main objective of Banverket, stated by the Swedish government, is to assure a cost-effective and long-term provision of transportation for citizens and the business sector. In order to stay competitive with other forms of transportation, the railway needs to be cost-effective and provide reliable service. The reliable service is to a great extent reflected in terms of train punctuality. Railway components in general have a fairly long life, which means that the cost effe
APA, Harvard, Vancouver, ISO, and other styles
35

Dorafshan, Sattar. "Non-Contact Evaluation Methods for Infrastructure Condition Assessment." DigitalCommons@USU, 2018. https://digitalcommons.usu.edu/etd/7314.

Full text
Abstract:
The United States infrastructure, e.g. roads and bridges, are in a critical condition. Inspection, monitoring, and maintenance of these infrastructure in the traditional manner can be expensive, dangerous, time-consuming, and tied to human judgment (the inspector). Non-contact methods can help overcoming these challenges. In this dissertation two aspects of non-contact methods are explored: inspections using unmanned aerial systems (UASs), and conditions assessment using image processing and machine learning techniques. This presents a set of investigations to determine a guideline for remote
APA, Harvard, Vancouver, ISO, and other styles
36

Eastwood, Paul Graham. "Diesel engine condition monitoring : laser-based diagnostic techniques." Thesis, University of Southampton, 1989. https://eprints.soton.ac.uk/52246/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Hassin, Osama A. A. "Condition monitoring of journal bearings for predictive maintenance management based on high frequency vibration analysis." Thesis, University of Huddersfield, 2017. http://eprints.hud.ac.uk/id/eprint/34161/.

Full text
Abstract:
Journal bearings are widely used as rotor supports in many machinery systems such as engines, motors, turbines and huge pumps. The journal bearing is simply designed, highly efficient, has a long life, low cost and doesn’t fail easily. Based on preventive maintenance strategies, many monitoring techniques are developed for monitoring journal bearings such as lubricant analysis, vibration analysis, noise and acoustic emission analysis. Vibration monitoring techniques have been developed and it can be implemented online or offline without interrupting the machine operations. The vibration phenom
APA, Harvard, Vancouver, ISO, and other styles
38

LI, ZHENGSHENG. "INVESTIGATION OF SEVERAL ISSUES RELATED TO THREE DIMENSIONAL FINITE ELEMENT BRIDGES CONDITION EVALUATION." University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1069770984.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Booth, James Edward. "The feasibility of using electrostatic charge condition monitoring for lubricant additive screening." Thesis, University of Southampton, 2008. https://eprints.soton.ac.uk/64859/.

Full text
Abstract:
International standards require lubricant formulators to develop additive packages that increase fuel economy, reduce environmental impact and minimise wear over ever increasing service intervals. However, additive behaviour and interactions between additives is not well understood. An absence of real-time technology has hindered understanding of additive behaviour and interaction between additives in tribo-contacts. The work presented in this thesis assessed whether electrostatic charge monitoring, which is sensitive to changes in surface chemistry, can offer insight into additive-surface beh
APA, Harvard, Vancouver, ISO, and other styles
40

Penchaliah, Ramkumar. "The influence of contaminants and their interactions on diesel engine oil tribology using electrostatic condition monitoring." Thesis, University of Southampton, 2007. https://eprints.soton.ac.uk/64901/.

Full text
Abstract:
In modern automotive engines, especially in diesel engines, consumer demand for ever increasing service intervals for vehicles has led to longer oil drain periods. Consequently this has increased contamination levels in lubricating oils that will in turn reduce engine efficiency and increase the possibility of system failure due to increases in viscosity and the potential of oil starvation leading to scuffing and catastrophic failure of the engine. Therefore it is necessary to investigate the effects of diesel engine oil contaminants on the tribological performance of tribocontacts and also th
APA, Harvard, Vancouver, ISO, and other styles
41

Palo, Mikael. "Condition-based maintenance for effective and efficient rolling stock capacity assurance : A study on heavy haul transport in Sweden." Doctoral thesis, Luleå tekniska universitet, Drift, underhåll och akustik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-16943.

Full text
Abstract:
All businesses need equipment to deliver services or manufacture goods. Over time, this equipment will degrade, but with proper maintenance, the degradation can be controlled, and failed equipment can be restored to operational status. Run-to-failure maintenance is performed when equipment or systems break down. In preventive maintenance, equipment is maintained as a precautionary measure to prevent failure. Finally, condition-based maintenance recommends maintenance actions based on the condition of the asset.The railway is a superior mode of transport if capacity, speed and environment are t
APA, Harvard, Vancouver, ISO, and other styles
42

Hamed, Moamar. "Characterisation of the dynamics of an automotive suspension system for on-line condition monitoring." Thesis, University of Huddersfield, 2016. http://eprints.hud.ac.uk/id/eprint/29088/.

Full text
Abstract:
As the most critical system that determines the driving performance, passenger comfort and road safety of a vehicle, the suspension system has not been found to have adequate monitoring systems available to provide early warnings of possible faults online. To fill this gap, this study has focused on the investigation of the dynamic behaviour of the suspensions upon which a new on-line condition suspension monitoring approach was proposed and verified under different conditions. Specifically, the approach quantifies the modal shapes which are obtained based on an improved modal identification a
APA, Harvard, Vancouver, ISO, and other styles
43

Bakhary, Norhisham. "Structural condition monitoring and damage identification with artificial neural network." University of Western Australia. School of Civil and Resource Engineering, 2009. http://theses.library.uwa.edu.au/adt-WU2009.0102.

Full text
Abstract:
Many methods have been developed and studied to detect damage through the change of dynamic response of a structure. Due to its capability to recognize pattern and to correlate non-linear and non-unique problem, Artificial Neural Networks (ANN) have received increasing attention for use in detecting damage in structures based on vibration modal parameters. Most successful works reported in the application of ANN for damage detection are limited to numerical examples and small controlled experimental examples only. This is because of the two main constraints for its practical application in det
APA, Harvard, Vancouver, ISO, and other styles
44

Hutchison, Michael John. "Corrosion of Post-Tensioning Strands in Ungrouted Ducts - Unstressed Condition." Scholar Commons, 2013. http://scholarcommons.usf.edu/etd/4905.

Full text
Abstract:
Recent failures and severe corrosion distress of post-tensioned (PT) bridges in Florida have revealed corrosion of the 7-wire strands in tendons. Post-tensioned duct assemblies are fitted with multiple 7-wire steel strands and ducts are subsequently filled with grout. During construction, the length of time from the moment in which the strands have been inserted into the ducts, until the ducts are grouted, is referred to as the `ungrouted' period. During this phase, the steel strands are vulnerable to corrosion and consequently the length of this period is restricted (typically to 7 days) by c
APA, Harvard, Vancouver, ISO, and other styles
45

Ahmaida, Anwar M. "Condition monitoring and fault diagnosis of a multi-stage gear transmission using vibro-acoustic signals." Thesis, University of Huddersfield, 2018. http://eprints.hud.ac.uk/id/eprint/34755/.

Full text
Abstract:
Gearbox condition monitoring(CM) plays a vital role in ensuring the reliability and operational efficiency of a wide range of industrial facilities such as wind turbines and helicopters. Many technologies have been investigated intensively for more accurate CM of rotating machines with using vibro-acoustic signature analysis. However, a comparison of CM performances between surface vibrations and airborne acoustics has not been carried out with the use of emerging signal processing techniques. This research has focused on a symmetric evaluation of CM performances using vibrations obtained from
APA, Harvard, Vancouver, ISO, and other styles
46

Craig, Mark. "Advanced condition monitoring to predict rolling element bearing wear using multiple in-line and off-line sensing." Thesis, University of Southampton, 2010. https://eprints.soton.ac.uk/185079/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Lin, Xiaojun. "Multiple Random Slope and Fixed Intercept Linear Regression Models for Pavement Condition Forecasting." University of Toledo / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1430364217.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Tuttle, Robert S. "Condition Analysis of Concrete Bridge Decks in Utah." Diss., CLICK HERE for online access, 2005. http://contentdm.lib.byu.edu/ETD/image/etd853.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Wang, Teng. "3D Infrastructure Condition Assessment For Rail Highway Applications." UKnowledge, 2016. http://uknowledge.uky.edu/ce_etds/41.

Full text
Abstract:
Highway roughness is a concern for both the motoring public and highway authorities. Roughness may even increase the risk of crashes. Rail-highway grade crossings are particularly problematic. Roughness may be due to deterioration or simply due to the way the crossing was built to accommodate grade change, local utilities, or rail elevation. With over 216,000 crossings in the US, maintenance is a vast undertaking. While methods are available to quantify highway roughness, no method exists to quantitatively assess the condition of rail crossings. Conventional inspection relies on a labor-intens
APA, Harvard, Vancouver, ISO, and other styles
50

Aliwan, Mustafa. "Exploration of a condition monitoring system for rolling bearing based on a wireless sensor network." Thesis, University of Huddersfield, 2016. http://eprints.hud.ac.uk/id/eprint/29080/.

Full text
Abstract:
In recent years, wireless sensor networks (WSN) have attracted attention in machine condition monitoring (CM) fields for a more efficient system based on the inherent advantages of WSN, including ease of installation and relocation, lower maintenance cost and the ability to be installed in places not easily accessible. As critical components of rotating machines, bearings account for more than 40% of the various types of failures, causing considerable unpredicted breakdowns of a plant. Thus, this thesis intends to develop a cost-effective and reliable wireless measurement system for rolling be
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!