Academic literature on the topic 'Class II Corrector'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Class II Corrector.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Class II Corrector"

1

Mendigeri, Vijaylaxmi, Sanjay Ganeshkar, Praveen Ramdurg, Shruti Singh, Nishi Grover, and Juhi Yadav. "Evaluation of effect of PowerScopeTM class II corrector on skeletal, dental and Oro-pharyngeal airway dimension in Skeletal class II cases - A controlled prospective clinical study." IP Indian Journal of Orthodontics and Dentofacial Research 7, no. 2 (2021): 144–49. http://dx.doi.org/10.18231/j.ijodr.2021.025.

Full text
Abstract:
: The aim of this study was to evaluate the effect of PowerScope (Class II Corrector) on skeletal, dental and oro-pharyngeal airway dimensions in class II malocclusion with retrusive mandible. Twenty patients with age group of 11 to 14 were selected for this study. Experimental group underwent Power scope class II corrector therapy and control group, alignment of only upper arch respectively. Lateral cephalometric radiographs were taken in both experimental group and control group before and after 6 month of treatment. Sixteen measurements in that eight skeletal, five dental and three pharynge
APA, Harvard, Vancouver, ISO, and other styles
2

Murarka, Shriya Prakash, Sunita Shrivastav, Ranjit Kamble, et al. "Comparative Evaluation of Discomfort, Expectations and Functional Experiences during Treatment of Class II Malocclusion with Forsus Fixed Functional Appliance and Sharma’s Class II Corrector - A Questionnaire Based Survey." Journal of Evolution of Medical and Dental Sciences 10, no. 8 (2021): 474–78. http://dx.doi.org/10.14260/jemds/2021/104.

Full text
Abstract:
BACKGROUND The Forsus fatigue resistant device (FFRD) appliance is known to correct Class II malocclusion. The disadvantage of it are labial flaring of lower incisors, distalisation and extrusion of maxillary molars, difficulty in procuring the appliances in remote areas and cost. No research has documented the comparison of patient’s experience with FFRD and Sharma’s Class II corrector appliance. Therefore, a questionnaire survey was conducted. METHODS 40 patients having Class II Division 1 malocclusion were included and were divided into two groups- FFRD appliance (group 1, 20 patients) and
APA, Harvard, Vancouver, ISO, and other styles
3

Paulose, Joby, PalathottungalJoseph Antony, Brijesh Sureshkumar, SushaMariam George, ManuMundackal Mathew, and Joseph Sebastian. "PowerScope a Class II corrector – A case report." Contemporary Clinical Dentistry 7, no. 2 (2016): 221. http://dx.doi.org/10.4103/0976-237x.183044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Spary, David John, and Rachel Ann Little. "The simple class II and class III corrector: three case reports." Journal of Orthodontics 42, no. 1 (2015): 69–75. http://dx.doi.org/10.1179/1465313314y.0000000123.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dogra, Namrata, Archana Jaglan, Sidhu M. S., Seema Grover, and Suman Suman. "Skeletal Class II Malocclusion Treated with AdvanSync 2 - A Case Report." Journal of Evolution of Medical and Dental Sciences 10, no. 34 (2021): 2951–53. http://dx.doi.org/10.14260/jemds/2021/603.

Full text
Abstract:
Treatment of complex malocclusion poses a challenge for the orthodontist because of its multifactorial aetiology. Class II malocclusion is the most frequently encountered and treated malocclusion in orthodontic practice and affects approximately 14.6 % of the North Indian population.1 A common reason for Class II malocclusion is mandibular skeletal retrusion which is the most common characteristic, as reported by McNamara.2 This can be caused by genetic or hereditary factors. When evaluating treatment options for Class II patients, the extent of the skeletal discrepancy and the skeletal maturi
APA, Harvard, Vancouver, ISO, and other styles
6

Ansari, Akram, Abhay Kumar Jain, Ankit Singh, Priya Sharma, and Muneeb Adil. "Management of Skeletal Class II Malocclusion in Non-Complaint Patient using Powerscope - A Case Report." Orthodontic Journal of Nepal 9, no. 2 (2019): 77–81. http://dx.doi.org/10.3126/ojn.v9i2.28421.

Full text
Abstract:
Class II malocclusion in pubertal phase presents a major and a common challenge to orthodontists. Proper diagnosis and treatment planning in early stage help in preventing and intercepting the severity of malocclusion. In pubertal phase skeletal Class II malocclusion due to mandibular retrusion are best treated with functional appliance. In recent time PowerScope fixed functional appliance is gaining immense popularity as noncompliant Class II corrector. In the present case report an adolescent male patient having Class II division 1 malocclusion with functional jaw retrusion was treated using
APA, Harvard, Vancouver, ISO, and other styles
7

Prakash, Amit, Heena Kausar, and Sashi B. Ekka. "Miniscrews-assisted Lacebacks in Forsus to Minimize Lower Incisor Proclination." Orthodontic Journal of Nepal 8, no. 1 (2018): 56–57. http://dx.doi.org/10.3126/ojn.v8i1.21350.

Full text
Abstract:
Forsus is a Class II corrector appliance used in growing as well as in young adults. Proclination and forward movement of lower incisor is the major drawback reported using this appliance. Forsus results in Class II correction mainly through dentoalveolar effect and minimal skeletal effect. We used a new innovation incorporating miniscrew assisted laceback to minimize lower incisor proclination. Utilization of miniscrew assisted laceback effectively reduces the unfavorable proclination and allows additional skeletal effects. This method applies a distal driving force on the lower anteriors, wh
APA, Harvard, Vancouver, ISO, and other styles
8

Mithun, K., Rohan Rai, Jacob Joseph, V. Harshitha, and Suhani Shetty. "Twinkle R 3D appliance - An innovative functional skeletal class II corrector." Contemporary Clinical Dentistry 11, no. 4 (2020): 382. http://dx.doi.org/10.4103/ccd.ccd_18_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chhibber, Aditya, Madhur Upadhyay, Flavio Uribe, and Ravindra Nanda. "Mechanism of Class II correction in prepubertal and postpubertal patients with Twin Force Bite Corrector." Angle Orthodontist 83, no. 4 (2012): 718–27. http://dx.doi.org/10.2319/090412-709.1.

Full text
Abstract:
ABSTRACT Objective: To compare the dentoskeletal effects and treatment efficiency of the Twin Force Bite Corrector (TFBC) appliance in Class II correction of patients treated before or after the pubertal growth spurt. Materials and Methods: Forty-one normodivergent Class II patients treated with the TFBC appliance were divided into two groups based on their cervical vertebral maturation stage (CVMS). Group 1 (G1) consisted of 23 patients (mean age 12.44 ± 1.59 years) where treatment was initiated before the pubertal growth spurt (CVMS I and II), while group 2 (G2) consisted of 18 patients (mea
APA, Harvard, Vancouver, ISO, and other styles
10

MJ, Ravindranath, and Little Mahendra. "Class II Malocclusion Management of an Adult Patient Using PowerScope® 2 Class II Corrector - A Clinical Case Report." Acta Scientific Dental Scienecs 4, no. 11 (2020): 65–67. http://dx.doi.org/10.31080/asds.2020.04.0964.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Class II Corrector"

1

Redford, James. "Mandibular Incisor Proclination Variability During Class II Correction." VCU Scholars Compass, 2014. http://scholarscompass.vcu.edu/etd/3424.

Full text
Abstract:
Background: Lower incisor proclination has been shown to increase during Class II correction with appliances such as the Forsus. This lower incisor flaring shows great variability among patients. The purpose of this study was to evaluate the effects of Class II severity, mandibular growth, and occlusal plane rotation on lower incisor flaring in patients treated with the Forsus appliance. Materials and Methods: 121 records of Class II patients treated with the Forsus appliance were analyzed retrospectively. Cephalograms were traced at three time points. ANOVA was used to compare changes in
APA, Harvard, Vancouver, ISO, and other styles
2

Fontes, Fernanda Pinelli Henriques. "Estudo comparativo das alterações do tratamento da má oclusão de classe II com os aparelhos propulsores Jasper Jumper e Twin Force Bite Corrector, associados ao aparelho fixo." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/25/25144/tde-13092016-103235/.

Full text
Abstract:
O objetivo desta pesquisa foi comparar as alterações cefalométricas de pacientes com má oclusão de Classe II divisão 1, tratados com os aparelhos Jasper Jumper e Twin Force Bite Corrector, associados ao aparelho ortodôntico fixo. A amostra foi composta por 120 telerradiografias em norma lateral de 60 pacientes, os quais foram divididos em 3 grupos: Grupo Experimental 1, constituído por 20 pacientes com idade inicial média de 12,39 anos, tratados por meio do aparelho Jasper Jumper associado ao aparelho fixo, por um período médio de 2,42 anos; Grupo Experimental 2, contendo 20 pacientes com id
APA, Harvard, Vancouver, ISO, and other styles
3

Júnior, Carlos Henrique Guimarães. "Estudo das alterações dento-esqueléticas decorrentes do tratamento da má oclusão de classe II, 1ª divisão, com o aparelho propulsor mandibular twin force bite corrector, associado à aparelhagem fixa." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/25/25134/tde-02042009-152544/.

Full text
Abstract:
O propósito deste estudo foi avaliar as alterações dento-esqueléticas decorrente do tratamento da má oclusão de Classe II, com um aparelho ortopédico funcional fixo associado à aparelhagem fixa, mediante análise cefalométrica de 86 telerradiografias em norma lateral, referentes a 43 pacientes, de ambos os gêneros, com má oclusão de Classe II, 1ª divisão, divididos em dois grupos: Grupo Experimental (Grupo 1), constituído de 23 pacientes com idade inicial média de 11,81 anos, tratados com o aparelho funcional fixo Twin Force Bite Corrector (TFBC), juntamente à aparelhagem fixa, por um período m
APA, Harvard, Vancouver, ISO, and other styles
4

Bach, Cleimar Carlos. "AVALIAÇÃO DAS TÁBUAS ÓSSEAS VESTIBULARES E LINGUAIS DOS DENTES ANTERIORES INFERIORES E MOLARES SUPERIORES APÓS O TRATAMENTO COM OS APARELHOS FUNCIONAIS FIXOS FORSUS E TWIN FORCE BITE CORRECTOR." Universidade Metodista de São Paulo, 2011. http://tede.metodista.br/jspui/handle/tede/1284.

Full text
Abstract:
Made available in DSpace on 2016-08-03T16:31:16Z (GMT). No. of bitstreams: 1 Cleimar Carlos Bach.pdf: 2938306 bytes, checksum: 2ce02c5aa2704ece779a1f47c260b32b (MD5) Previous issue date: 2011-04-08<br>Because the consequences of the use of fixed orthopedic appliances on buccal and lingual periodontal bone are still a mystery to the orthodontist and to the clinical research, this study aimed to evaluate, using cone beam computed tomography (CBCT) changes in thickness plates of buccal and lingual bone in first molars and lower incisors and canines, after the use of fixed appliances and Twin Fo
APA, Harvard, Vancouver, ISO, and other styles
5

Burton, Rano. "An investigation into the treatment effects of three orthodontic appliance prescriptions for the correction of Class II division 1 malocclusions." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/mq23239.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Daniels, Sheila Meghnot. "Comparison of surgical and non-surgical orthodontic treatment approaches on occlusal and cephalometric outcomes in patients with severe Class II division I malocclusions." Thesis, University of Iowa, 2017. https://ir.uiowa.edu/etd/5449.

Full text
Abstract:
This study aimed to examine end-of-treatment outcomes of severe Class II Division I malocclusion patients treated with surgical or non-surgical approaches. This study tests the hypotheses that occlusal outcomes (ABO-OGS) at end of treatment will be similar while cephalometric outcomes will differ between these groups. A total of 60 patients were included: 20 of which underwent surgical correction and 40 of which did not. The end of treatment ABO-OGS and cephalometric outcomes were compared by Mann-Whitney U tests and multivariable linear regression models. Following adjustment for multiple con
APA, Harvard, Vancouver, ISO, and other styles
7

Shoff, Michael. "Compliance-free Class II correction and its relationship to vertical facial characteristics." VCU Scholars Compass, 2012. http://scholarscompass.vcu.edu/etd/2696.

Full text
Abstract:
Background: While efficacy of the Forsus appliance has been shown, there are disagreements on its mechanism for Class II correction. Class II studies have been criticized for ignoring potential differences in results based on differing vertical facial phenotypes. The purpose of this study was to better understand the effects of Class II correction using the Forsus appliance and relate changes during and at the completion of treatment to initial MP-SN angles. Materials and Methods: Records of 59 patients obtained at 4 different time points were examined retrospectively. ANOVA was used to d
APA, Harvard, Vancouver, ISO, and other styles
8

Hechler, Paul Joseph. "Long term patient and orthodontist satisfaction with non surgical correction of severe class II division 1 malocclusions." Thesis, University of Iowa, 2019. https://ir.uiowa.edu/etd/6760.

Full text
Abstract:
Background: The correction of Class II malocclusions is one of the most common treatments performed in the United States. Despite Class II malocclusions being one the most commonly presented problems for orthodontists, there is no consensus of which non-surgical treatment modality best impacts a patient’s quality of life long term. Purpose: This study examines the different non-surgical treatment approaches for patients with severe Class II division 1 and the impact of treatment outcomes on patient satisfaction and quality of life long term. Study Design: This study retrospectively analyzed th
APA, Harvard, Vancouver, ISO, and other styles
9

Almeida, Filho Roberto Pinto de. "EFEITOS DOS APARELHOS TWIN FORCE BITE CORRECTOR E FORSUS FATIGUE RESISTANT DEVICE NA JUNÇÃO TEMPOROMANDIBULAR E NAS VIAS AÉREAS." Universidade Metodista de São Paulo, 2011. http://tede.metodista.br/jspui/handle/tede/1290.

Full text
Abstract:
Made available in DSpace on 2016-08-03T16:31:17Z (GMT). No. of bitstreams: 1 Roberto Pinto de Almeida Filho 1-40.pdf: 248982 bytes, checksum: 1aee0c0dcec511dd4f9c2b8351bccba2 (MD5) Previous issue date: 2011-04-04<br>O objetivo deste estudo prospectivo foi verificar os efeitos dos aparelhos Twin Force Bite Corrector e Forsus Fatigue Resistant Device na junção temporomandibular e nas vias aéreas. Para tanto, foram selecionados 21 pacientes adultos jovens, má oclusão de Classe II 1ª. divisão, bilateral, mínimo de 1/2 Classe II, padrão de crescimento horizontal. Para tanto, a amostra foi dividid
APA, Harvard, Vancouver, ISO, and other styles
10

Ward, Robert. "Cephalometric evaluation of soft tissue effects induced by a class II corrector in different facial patterns." 2015. http://hdl.handle.net/1993/30607.

Full text
Abstract:
Objective: To determine the magnitude of soft tissue changes in subjects with different facial patterns following Class II correction. Materials/Methods: A retrospective sample of 80 subjects exhibiting Class II malocclusions was used. Subjects were categorized into facial types according to pre-treatment values of MPA and Y-axis, which yielded 20 brachycephalic, 40 mesocephalic, and 20 dolichocephalic subjects. Data collection included digital analysis on the pre-treatment (T0) and post-treatment (T1) cephalometric radiographs. A paired t-test statistic was used to investigate the differe
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Class II Corrector"

1

Erverdi, Nejat, and Melih Motro. "Class II Correction by Alveolar Distraction Osteogenesis." In Alveolar Distraction Osteogenesis. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07707-9_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Erverdi, Nejat, and Melih Motro. "Class II Correction by Alveolar Distraction Osteogenesis." In Alveolar Distraction Osteogenesis. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49781-1_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Grigolato, Luca, Stefano Filippi, Daniela Barattin, et al. "Conceptual Design of a Functional Orthodontic Appliance for the Correction of Skeletal Class II Malocclusion." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31154-4_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chhibber, Aditya, Ravindra Nanda, and Flavio Uribe. "The Twin Force Bite Corrector and skeletal anchorage for Class II correction." In Skeletal Anchorage in Orthodontic Treatment of Class II Malocclusion. Elsevier, 2015. http://dx.doi.org/10.1016/b978-0-7234-3649-2.00047-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Uribe, Flavio, Jeff Rothenberg, and Ravindra Nanda. "The Twin Force Bite Corrector in the correction of Class II malocclusion in adolescent patients." In Orthodontic Treatment of the Class II Noncompliant Patient. Elsevier, 2006. http://dx.doi.org/10.1016/b978-0-7234-3391-0.50018-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

DeVincenzo, John P. "The Eureka Spring™: a compact, versatile, and costeffective Class II corrector." In Orthodontic Treatment of the Class II Noncompliant Patient. Elsevier, 2006. http://dx.doi.org/10.1016/b978-0-7234-3391-0.50017-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nanda, Ram S., Tarisai C. Dandajena, and Ravindra Nanda. "Nonextraction Class II Correction." In Esthetics and Biomechanics in Orthodontics. Elsevier, 2015. http://dx.doi.org/10.1016/b978-1-4557-5085-6.00012-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yezdani, A. Arif, Prashanth Sreenivasan, R. Padmavati, S. Kishore Kumar, and Kesavaram Padmavathy. "Class II Skeletal Malocclusion Correction with Herbst Appliance." In Highlights on Medicine and Medical Research Vol. 2. Book Publisher International (a part of SCIENCEDOMAIN International), 2021. http://dx.doi.org/10.9734/bpi/hmmr/v2/1617c.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Papadopoulos, Moschos A. "Classification of the noncompliance appliances used for Class II correction." In Orthodontic Treatment of the Class II Noncompliant Patient. Elsevier, 2006. http://dx.doi.org/10.1016/b978-0-7234-3391-0.50007-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chhibber, Aditya, Madhur Upadhyay, and Ravindra Nanda. "Class II Correction with an Intermaxillary Fixed Noncompliance Device." In Esthetics and Biomechanics in Orthodontics. Elsevier, 2015. http://dx.doi.org/10.1016/b978-1-4557-5085-6.00013-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Class II Corrector"

1

Dzugkoev, S. G., F. S. Dzugkoeva, and O. Yu Garmash. "Pathogenetic Substantiation of the Endothelial Dysfunction Correction in Ischemic Heart Disease of II Functional Class." In The International Conference “Health and wellbeing in modern society” (ICHW 2020). Atlantis Press, 2020. http://dx.doi.org/10.2991/ahsr.k.201001.029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sousa, Bruno, Mariza Bigonha, and Kecia Ferreira. "Evaluating Co-Occurrence of GOF Design Patterns with God Class and Long Method Bad Smells." In XIII Simpósio Brasileiro de Sistemas de Informação. Sociedade Brasileira de Computação, 2017. http://dx.doi.org/10.5753/sbsi.2017.6068.

Full text
Abstract:
Design patterns are general reusable solutions to common recurring problems in software projects. These solutions, when correctly applied, are supposed to enhance modular and flexible structures in software. The aim of this work is to study the occurrences of God Class and Long Method bad smells in software systems developed with design patterns. To achieve this aim, we carried out a study with five Java project, in order to: (i) investigate if the use of GOF design patterns avoid the occurrences of the bad smells God Class and Long Method, (ii) identify co-occurrences of the GOF design patter
APA, Harvard, Vancouver, ISO, and other styles
3

Surana, K. S., and H. Vijayendra Nayak. "Solutions of Higher Class and Their Computations for Polymer Flows: Oldroyd-B Constitutive Model." In ASME 2001 Engineering Technology Conference on Energy. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/etce2001-17145.

Full text
Abstract:
Abstract This paper presents formulations, computations and investigations of the solutions of class C00 and C11 for two dimensional viscoelastic fluid flows in u, v, p, τijp, τijs with Oldroyd-B constitutive model using p-version Least Squares Finite Element Formulation (LSFEF). The main thrust of the research work presented in the paper is to employ ‘right class of interpolations’ and the best computational strategy to establish: i) when does Oldroyd-B model begins to fail in simulating the correct physics of flow ii) when and why does the proposed computational process fail iii) is there a
APA, Harvard, Vancouver, ISO, and other styles
4

Ban˜o´ Azco´n, Alberto, and Jose´ Mollera Barriga. "Electrical Network Modeling and Electrical Transfer Simulation of C.N. Asco´ I and C.N. Asco´ II, to Obtain Voltage and Frequency Limit Values Allowing the Electrical Transfer From the Main Generator to the External 110 kV Power Grid." In 17th International Conference on Nuclear Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/icone17-75546.

Full text
Abstract:
Broadly speaking, a simple electrical diagram of Asco´ I and Asco´ II power nuclear plants could be two power supply bus bars for general equipment classified No-1E, three power supply bus bars class No-1E for the Reactor Coolant Pumps (RCP) and two more bus bars classified 1E for safety related equipment. In normal operating mode, all the five power supply bus bars class No-1E are connected to the main generator (GP1) through two unit transformers (TAG1/2), while the two class 1E power supply bus bars are always connected to an external 110 kV power grid through two auxiliary transformer (TAA
APA, Harvard, Vancouver, ISO, and other styles
5

Brittingham, Robert A., and James H. Leylek. "A Detailed Analysis of Film Cooling Physics: Part IV — Compound–Angle Injection With Shaped Holes." In ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/97-gt-272.

Full text
Abstract:
The flow physics of film cooling with compound–angle shaped holes is documented for realistic gas turbine parameters. For the first time in the open literature, the combined effects of compound–angle injection and hole shaping are isolated and the dominant mechanisms are examined. Results provide valuable insight into the flowfield of this class of film–cooling jets. Computational and experimental results are presented for a row of holes injected at 35° on a flat plate with three distinct geometric configurations: (1) streamwise injected cylindrical holes (reference case); (2) 15° forward–diff
APA, Harvard, Vancouver, ISO, and other styles
6

Surana, K. S., and H. Vijayendra Nayak. "Computations of Numerical Solutions of Higher Class in 2D Polymer Flows: Upper Convected Maxwell Model." In ASME 2001 Engineering Technology Conference on Energy. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/etce2001-17144.

Full text
Abstract:
Abstract This paper presents formulations, computations and investigations of the solutions of classes C00 and C11 for two-dimensional viscoelastic fluid flows in primitive variables u, v, p, τxx, τxy, τyy with Upper Convected Maxwell (UCM) constitutive model using p-version least squares finite element formulation (LSFEF). The main emphasis of the investigations, undertaken in this research work, is to employ the right classes of interpolations and the best computational strategy to address, to illuminate on and perhaps, to answer and resolve whether the “continued obsession of developing new
APA, Harvard, Vancouver, ISO, and other styles
7

Seipel, Justin. "Mechanistic Model-Based Method for Bio-Inspired Design and Education." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64595.

Full text
Abstract:
Biologically-inspired design is challenging because it requires creative transfer across biological and engineering disciplines. The biologically-inspired design process could therefore be improved with new tools, methods, and pedagogy that enables a smooth transition from a biological example or concept to a conceptual engineering design based on existing engineering components and practices. Two important problems can arise immediately when an engineer or student attempts bioinspired design: I. The practitioner or student of biological inspiration or biomimicry may not understand what the bi
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!