Relevant bibliographies by topics / Clausiuv cyklus

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Clausiuv cyklus'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Clausiuv cyklus.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Clausiuv cyklus"

1

Přívozník, Martin. "Porovnání tepelných účinností cyklů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231805.

Full text
Abstract:
Theme of this master's thesis Comparison of thermal cycle efficiency is aimed on the calculation of thermal schemes of reheating and without reheating for various performances. The calculation is performed using specialized literature. The introduction describes the fundamental thermal cycle used in power plants and Rankine - Clausius cycle. After the initial familiarization with the parameters of Rankine - Clausius cycle follow a section with technical solutions to improve thermal efficiency of Rankine - Clausius thermal cycle. The aim of this work is to identify and compare the thermal efficiency of the thermal cycle with reheating, without reheating and compare them with each other. At the conclusion of this work is shown comparison between two low-pressure regeneration systems.
APA, Harvard, Vancouver, ISO, and other styles
2

Čepl, Ondřej. "Optimalizace Rankineůva-Clausiůva parního cyklu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230982.

Full text
Abstract:
This diploma thesis deals with an optimization of Rankine-Clausius steam cycle. The theoretical information about the Optimization and the Rankine-Clausius cycle are described at the beginning of the thesis. These theoretical findings are later used to create simulation models in MATLAB. Individual simulation models are variants of the ideal R-C cycle. Simulation models include the basic cycle model, the supercritical cycle and the cycle with reheat. For these models the optimal configurations are found and their t-s diagrams are plotted.
APA, Harvard, Vancouver, ISO, and other styles
3

Velešík, Aleš. "Stanovení výkonnosti chladicího okruhu - chladící věž." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232151.

Full text
Abstract:
The aim of this work is to determine the performance and description of the cooling circle in the cooling tower. In order to do that there was applied the linear regression approach in order to create structural empirical model of the cooling tower. The data obtained was analysed through QC expert software, which, if correct data applied, identifies suitable model for specific tower. The models created will be used for diagnostics of the cooling circles and as a comparison tool with other cooling towers in the future. Thus, the findings of this thesis are polynoms, which in thic technological setup characterise the models of the cooling towers.
APA, Harvard, Vancouver, ISO, and other styles
4

Khůlová, Jitka. "Topné výměníky, vliv zapojení na účinnost cyklu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400503.

Full text
Abstract:
The master's thesis deals with district heat exchangers in a thermal steam cycle of combined heat and power plants and with types of condensate cascades in the multilevel heating systems. Calculation of the thermal efficiency of electricity generation is provided for the investigated thermal cycle, which was modified for three different types of cascades. Besides that, a comparison of useful electric power and electricity generation through one year period of working is made. A significant part of the work is devoted to the design of district heat exchangers, including the calculation of thermal power and heat transfer area. Main dimensions are proposed for each exchanger together with a basic drawing.
APA, Harvard, Vancouver, ISO, and other styles
5

Houdek, Milan. "Srovnání energetických oběhů z pohledu jejich celkové účinnosti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229224.

Full text
Abstract:
This diploma thesis investigates the combined production of power and heat from biomass. The main aim is to compare suggested energy circles in the light of their electric, general and economic efficiency. Introduction describes the basic terms and principles of energy utilization of biomass, combustion and gasification technology are described thoroughly. The main part contains suggestions and thermal calculations of energy circles. The thermal cycle with gasification chamber, combustion chamber and hot air turbine is proposed, than thermal cycle with gasification generator and cogeneration unit and finally Rankine-Clausius circle. In conclusion calculated results are recapitulated and the usability of proposed thermal cycles is assessed.
APA, Harvard, Vancouver, ISO, and other styles
6

Staněk, Štěpán. "Paroplynová turbína pro akumulaci energie." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417553.

Full text
Abstract:
Master thesis discusses the growing need of electric energy storage and its effectivity and capacity. It describes an overview of possible technologies with their advantages and disadvantages. Greater attention is paid to the storage of energy in gas, so-called Power to Gas, which combines the electrolytic production of hydrogen from water and the Sabatier reaction to produce synthetic methane. This technology is introduced in the so-called SIT Brno cycle of Siemens Industrial Turbomachinery company. The main part of the thesis is focused on the description of this cycle and on the calculation of the steam-gas turbine (high-pressure and low pressure module). This thesis describes the methodology of turbine calculation and the composition of the steam gas mixture after combustion of methane. The carbon dioxide formed by combustion in the steam-gas mixture generator was replaced by steam. Part of the diploma thesis are drawings of cross-section of individual turbine modules.
APA, Harvard, Vancouver, ISO, and other styles
7

Joska, Jakub. "Charakteristiky ventilátorových chladicích věží." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443198.

Full text
Abstract:
This diploma thesis deals with the problematics of fan cooling towers. The very first part of the text is research, focusing mainly on the theory of cooling and the function of fan cooling towers in general. The following chapter deals with the water resource management of the Dukovany nuclear power plant and the specification of its objects of forced draft cooling towers. The second part describes a computational model created to determine the cooling performance of these towers under the given input conditions. In the following chapters, the results from the computational model are compared with the available data from warranty measurements and with the provided characteristics. The final pages deal with the study of the influence of changes in input parameters on the cooling performance and the research of the behavior of the cooling towers under extreme weather conditions.
APA, Harvard, Vancouver, ISO, and other styles
8

Kantor, Radek. "Aplikační případy využití zkapalněného zemního plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401563.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography