Relevant bibliographies by topics / CNC programming

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'CNC programming'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'CNC programming.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "CNC programming"

1

Fatriyana, Maya. "CNC PROGRAM AND PROGRAMMING OF CNC MACHINE." Journal of Mechanical Science and Engineering 7, no. 1 (2020): 019–23. http://dx.doi.org/10.36706/jmse.v7i1.37.

Full text
Abstract:
A programming to make parts are CNC Programming (Computer Numerical Control Programming) for machines. An NC program consists of a sequence of instructions that control the motion and automatic sequences of an NC Machine to perform a particular processing task. In a general sense, the term NC programming refers to the creation of control data for machining workpieces on NC and CNC machines. NC programming has a decisive influence on the cost-effectiveness and profitability of NC manufacturing. The selection of a programming system is mostly guided by the need for software that is suitable for
APA, Harvard, Vancouver, ISO, and other styles
2

Vasilić, Goran, Saša Živanović, and Milan Milutinović. "Parametric programming of CNC lathes." Tehnika 79, no. 6 (2024): 699–706. https://doi.org/10.5937/tehnika2406699v.

Full text
Abstract:
Parametric programming of CNC machines belongs to advanced programming techniques that provide several advantages compared to the generally accepted ways of creating G-code programs. Until now, manufacturers of CNC machines and their control units have mostly used this way of programming to create fixed processing cycles. Despite the range of possibilities it provides, parametric programming is not sufficiently representative of the end users of CNC machines. CNC machine programmers do not use this way of programming due to insufficient training and a lack of literature for education. This pap
APA, Harvard, Vancouver, ISO, and other styles
3

Kuczmaszewski, Józef, Paweł Pieśko, and Magdalena Zawada-Michałowska. "A Comparative Analysis of the Impact of CNC Miller Programming on Machining Effects." Multidisciplinary Aspects of Production Engineering 1, no. 1 (2018): 161–67. http://dx.doi.org/10.2478/mape-2018-0021.

Full text
Abstract:
Abstract This paper presents a comparison of the impact of the programming methods of a CNC miller on the machining effects. As a part of the study, the test samples were made of the EN AW-2024 aluminium alloy. The CNC machining programs compared were developed with two programming methods: by inputting the CNC machining program directly from the CNC miller's control panel (machine level programming) and in a CAM software environment (CAM programming). The machining effect indicators adopted included: machining time, surface quality, and dimensional deviation of specific geometrical features.
APA, Harvard, Vancouver, ISO, and other styles
4

Bao, Mei Lian. "Automatic Programming Based on the Feature of the Parts." Applied Mechanics and Materials 401-403 (September 2013): 1586–89. http://dx.doi.org/10.4028/www.scientific.net/amm.401-403.1586.

Full text
Abstract:
The structure of machining workpiece is more and more complex, from the perspective of CNC machining, contains a lot of processing features generally. Machining feature plays an important role for production process for CNC machining programming, CNC code, as well as the analysis of clamping. Feature programming is one of the development trend of automatic CNC programming. This improve the efficiency of programming greatly.
APA, Harvard, Vancouver, ISO, and other styles
5

NÉMETHOVÁ, Silvia, and Michal MRÁZEK. "PROGRAMMING OF CNC MACHINES - IS IT PROGRAMMING INDEED?" Trends in Education 13, no. 1 (2020): 53–62. http://dx.doi.org/10.5507/tvv.2020.007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Hai Yun, Yu Gang Zhao, Zhong Wen Sima, and Yan Rong Li. "CNC Programming for 2D Image." Advanced Materials Research 591-593 (November 2012): 810–13. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.810.

Full text
Abstract:
Many parts such as craftworks and hand draw pictures were manufactured based on the image. Their shape was irregular and couldn't measure accurately. And the dimension was not labeled definitely. So the CNC machining code couldn't directly generate. The paper studied the methods and the machining performance of this kind of part. The digital image could be obtained through the scanner or the digital camera, and pretreated by computer. The digital images were transferred into the vector document and the boundary dimension parameters could be gotten. The NC instruction was generated through the
APA, Harvard, Vancouver, ISO, and other styles
7

Johnston, Jackie. "PAMS chosen for CNC programming." Aircraft Engineering and Aerospace Technology 67, no. 1 (1995): 8–9. http://dx.doi.org/10.1108/eb037537.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kovacic, M., M. Brezocnik, I. Pahole, J. Balic, and B. Kecelj. "Evolutionary programming of CNC machines." Journal of Materials Processing Technology 164-165 (May 2005): 1379–87. http://dx.doi.org/10.1016/j.jmatprotec.2005.02.047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nofrizal, Nofrizal, Wakito Waskito, and Yuliana Yuliana. "HASIL BELAJAR PEMROGRAMAN CNC DITINJAU DARI PERSEPSI TENTANG DUNIA KERJA DAN MINAT BELAJAR." PAKAR Pendidikan 12, no. 2 (2014): 128–38. http://dx.doi.org/10.24036/pakar.v12i2.142.

Full text
Abstract:
This study aimed to analyze the relation (1) perception of the world of work with the learning outcomes CNC programming, (2) Interest in learning with learning outcomes of CNC programming Mechanical Engineering FT UNP in 2011, (3) perceptions about the world of work and interest in learning together with the learning outcomes of CNC programming Mechanical Engineering FT UNP in 2011. This study used a correlational. The sample in this research were 124 students from the Department of Mechanical Engineering FT UNP, used Slovin formula with proportional random sampling technique. The results show
APA, Harvard, Vancouver, ISO, and other styles
10

Budimlić, Zoran, Michael Burke, Vincent Cavé, et al. "Concurrent Collections." Scientific Programming 18, no. 3-4 (2010): 203–17. http://dx.doi.org/10.1155/2010/521797.

Full text
Abstract:
We introduce the Concurrent Collections (CnC) programming model. CnC supports flexible combinations of task and data parallelism while retaining determinism. CnC is implicitly parallel, with the user providing high-level operations along with semantic ordering constraints that together form a CnC graph. We formally describe the execution semantics of CnC and prove that the model guarantees deterministic computation. We evaluate the performance of CnC implementations on several applications and show that CnC offers performance and scalability equivalent to or better than that offered by lower-l
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "CNC programming"

1

Moore, Robert Keith. "Computer aided programming of a CNC lathe." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25123.

Full text
Abstract:
A software package and associated hardware have been developed which gives users of the ORAC CNC Training Lathe an easier and faster method of manufacturing on the lathe. The package, entitled ORACAP, uses the computing power of a mini-mainframe computer, a VAX 11/750, to assist in part design, program generation, program optimization, and program proving for the ORAC Lathe. The package is designed for users unfamiliar with computers such as students in an educational institute or workers in a production facility and uses command procedures to simplify the preparation and execution of the modu
APA, Harvard, Vancouver, ISO, and other styles
2

Cherepanov, Maksym. "Ruční programovaní CNC strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Farka, Jan. "Možnosti řídicího systému Heidenhain při programování CNC obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444272.

Full text
Abstract:
Modern machine tools are equipped with control systems, which are the imaginary brain of the whole machine. These control systems are developed, further managed, and constantly innovated by many companies, so it is clear that there is a kind of competition in the field of control systems. The aim of this work is mainly to describe the possibilities of one of the greats among developers of control systems from the company Heidenhain and also a thorough comparison of this system with systems from other manufacturers. Last but not least, other Heidenhain products and their possibility of use in p
APA, Harvard, Vancouver, ISO, and other styles
4

Ošťádal, Josef. "Možnosti softwaru SinuTrain Operate 4.4 při programování CNC obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-231010.

Full text
Abstract:
This thesis points to the knowledge of milling technologies and the various possibilities by programming CNC machines. Further shortly describes hard materials, with methods of their machining and basics of workpiece clamping. Explains and points out to the various software options Sinumerik Operate 4.4 - ShopMill during processing program of designed component produced by using milling technology.
APA, Harvard, Vancouver, ISO, and other styles
5

Peng, Jie. "Design and analysis of a CNC system for machining and monitoring." Thesis, University of British Columbia, 1989. http://hdl.handle.net/2429/29730.

Full text
Abstract:
The development of unmanned machining systems has been a recent focus of manufacturing research. Computer Numerical Control (CNC) units, which monitor and control many tightly coupled machining tasks, are inseparable parts of the unmanned manufacturing system. This thesis addresses the detailed design and analysis of a modular CNC system for a milling machine. The feed drive control system of the machine tool is thoroughly studied. The mathematical model for the feed drive control system, which consists of a motion controller, power amplifiers and DC-servo motors, is developed and experiment
APA, Harvard, Vancouver, ISO, and other styles
6

Vostřel, Jan. "CNC soustružení tvarových součástí z korozivzdorné oceli." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229259.

Full text
Abstract:
This diploma thesis is focused on a CNC turning operation of form parts made of stainless steels. The first part of the diploma thesis is focused on a theoretical analysis of stainless steels material characteristics. The second part is focused on a concept of experiment of complex form experimental stainless steel components. In this thesis the new CNC technology is defined in a new operation system Sinumerik 840D/ShopTurn V06.04 with an application for a new multi-purpose turning centre SP280SY. The final part comprehends technical documentation, CNC programs of shaped components, their veri
APA, Harvard, Vancouver, ISO, and other styles
7

Kulenda, Martin. "Možnosti systému Sinumerik při programování CNC obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229874.

Full text
Abstract:
The master’s thesis incorporates the control system Sinumerik 840D to the most widely used control systems of CNC machine tools. In the first thesis part are analyzed the NC programming methodics, which are relative only to the control system Sinumerik 840D and an essentials necessary to understand the issue in the area of CNC machine tools. Next part of the thesis includes design of the technology and processing of the NC program for machined component (gearbox cover). The NC program is made by ShopMill that is focused on a workshop area. During the program creation is combined a ShopMill and
APA, Harvard, Vancouver, ISO, and other styles
8

Kongiranda, Ganapathi Changappa, and Erappa Vivek Mandanna Balapanda. "Design Automation For CNC Machining : A case study for generating CNC codes from geometric CAD models." Thesis, Linköpings universitet, Maskinkonstruktion, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-178695.

Full text
Abstract:
The intent of the thesis is to automate the generation of computer numerical control (CNC) codes from geometrical computer-aided design (CAD) models. The work is carried out using two machines, the MDX 40A milling machine, and the HAAS VM3 machine. The case study is to determine the potential in automating the code generation process. The empirical findings from the research studies reveal that the manual process for programming the codes for the models pose a challenge of consuming more time using the procedures in computer-aided manufacturing and manual operations performed by a programmer.
APA, Harvard, Vancouver, ISO, and other styles
9

Krulich, Hynek. "Sinumerik Operate 840D sl. při programování CNC obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400967.

Full text
Abstract:
This Master’s thesis is focused on capatilibities of software SinuTrain Sinumerik Operate version 4.8 SP1. In the first part is comparison of control systems and their options. The next part discusses programming method in CNC machining.In the last part there are a practical examples of programming, simulation of their production and technical-economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
10

Kohout, Tomáš. "Možnosti softwaru SinuTrain při programování CNC obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230568.

Full text
Abstract:
This thesis illustrates the potential use of software SinuTrain for programming CNC machine tools on the component Sugar Bowl. First of all, Sinumerik 840D control system - ShopTurn is briefly positioned among other control systems. Subsequently, the technological preparation of production is processed for the two alternatives. The first one is production version from the rod blank 160 mm and the second one is production variant from a pre-cast. NC programs are created for the production of components of both technological options of Sugar Bowl in the software SinuTrain 6.3 - 6.4 V Open ShopTu
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "CNC programming"

1

Smid, Peter. CNC programming handbook: A comprehensice guide to practical CNC programming. 3rd ed. Industrial Press, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Smid, Peter. CNC programming handbook: A comprehensive guide to practical CNC programming. Industrial Press, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Kaushik, Chikesh Ranjan, and J. Paulo Davim. CNC Programming for Machining. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-41279-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hodges, Bernard. CNC Part Programming Workbook. Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-12683-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Krar, Stephen F. CNC: Technology and programming. Gregg Division, McGraw-Hill, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tools, Denford Machine. IBM Triac CNC software programming manual. Denford Machine Tools, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tools, Denford Machine. IBM Orac CNC software programming manual. Denford Machine Tools, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Overby, Alan. CNC machining handbook: Building, programming, and implementation. McGraw-Hill/TAB Electronics, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Evans, Ken. Student workbook for programming of CNC machines. Industrial Press, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

M, Crandell Thomas, ed. An introduction to CNC machining and programming. Industrial Press, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "CNC programming"

1

Kumar, Kaushik, Chikesh Ranjan, and J. Paulo Davim. "CNC Programming." In Materials Forming, Machining and Tribology. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-41279-1_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Negi, Pawan Kumar, Mangey Ram, and Om Prakash Yadav. "CNC Programming Method." In Basics of CNC Programming. River Publishers, 2022. http://dx.doi.org/10.1201/9781003337317-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Smith, Graham T. "CNC Controllers and Programming Techniques." In CNC Machining Technology. Springer London, 1993. http://dx.doi.org/10.1007/978-1-4471-1748-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hodges, Bernard. "Planning a CNC program." In CNC Part Programming Workbook. Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-12683-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Negi, Pawan Kumar, Mangey Ram, and Om Prakash Yadav. "Drawings and CNC Programs." In Basics of CNC Programming. River Publishers, 2022. http://dx.doi.org/10.1201/9781003337317-11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Negi, Pawan Kumar, Mangey Ram, and Om Prakash Yadav. "Complete CNC Programming: Industrial Format." In Basics of CNC Programming. River Publishers, 2022. http://dx.doi.org/10.1201/9781003337317-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Negi, Pawan Kumar, Mangey Ram, and Om Prakash Yadav. "CNC Machine and Its Importance." In Basics of CNC Programming. River Publishers, 2022. http://dx.doi.org/10.1201/9781003337317-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Arroyo, G., C. Ochoa, J. Silva, and G. Vidal. "Towards CNC Programming Using Haskell." In Advances in Artificial Intelligence – IBERAMIA 2004. Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-30498-2_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hodges, Bernard. "Introduction." In CNC Part Programming Workbook. Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-12683-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hodges, Bernard. "Canned cycles/macros." In CNC Part Programming Workbook. Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-12683-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "CNC programming"

1

Nachev, Ventsislav, and Daniela Gotseva. "Educational Remote Platform for Programming and Control of CNC 3D Printers." In 2024 32nd National Conference with International Participation (TELECOM). IEEE, 2024. https://doi.org/10.1109/telecom63374.2024.10812308.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lo, Ian Leong Ting, Bao Guo, and Shaoyu Zeng. "An End-User Programming Interface for Robotic Arm Cleaning CNC Machines." In 2025 20th ACM/IEEE International Conference on Human-Robot Interaction (HRI). IEEE, 2025. https://doi.org/10.1109/hri61500.2025.10973861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Aspra, Nico O., and Chien Hwa Chong. "Developing an AI-Driven NC Programming Assistant: A Productive Failure Approach in CNC Education." In 2025 Systems and Information Engineering Design Symposium (SIEDS). IEEE, 2025. https://doi.org/10.1109/sieds65500.2025.11021219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ledenyák, Daniel, Tamás Rosta, and Mátyás Andó. "Improve the Practical Usability of Ballbar Machine Tool Verification." In 10th International Scientific Conference on Advances in Mechanical Engineering. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-hws2i5.

Full text
Abstract:
The ballbar measurement process is a useful friendly and quick way to verify a machine tool’s accuracy. The ballbar is a telescopic linear sensor with two precision balls at both ends. During the measurement, the sensor’s end is precisely located with the support of the magnetic cups, resulting in the +/- micrometer accurate measurement of radius in each of points of circular path. A CNC machine’s accuracy could be affected with several defects like defective tooling, worn spindles, or issues with workpiece clamping. The errors related to the machine are known as geometric, play related or dyn
APA, Harvard, Vancouver, ISO, and other styles
5

Marchetti, Francesco, Mauro Castelli, Illya Bakurov, and Leonardo Vanneschi. "Full Inclusive Genetic Programming." In 2024 IEEE Congress on Evolutionary Computation (CEC). IEEE, 2024. http://dx.doi.org/10.1109/cec60901.2024.10611808.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hasan, Mohd Asif, Gaurav Kumar Badhotiya, and Sanjay Kumar Sinha. "Agility enhancement in CNC machines through parametric programming." In 3RD INTERNATIONAL CONFERENCE OF BIO-BASED ECONOMY FOR APPLICATION AND UTILITY. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0113878.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hasan, Mohd Asif, Gaurav Kumar Badhotiya, and Sanjay Kumar Sinha. "Application of parametric programming in CNC machine tools." In 3RD INTERNATIONAL CONFERENCE OF BIO-BASED ECONOMY FOR APPLICATION AND UTILITY. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0113971.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Han, Jiang, Xiao-qing Tian, Lian Xia, Fu-gen Li, Jie Cheng, and Bao Chen. "Key Technologies of Embedded Gear Machining CNC System." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1083.

Full text
Abstract:
A reconfigurable gear machining numerical control system (NC/CNC) architecture is proposed in this paper. The CNC platform can be quickly applied to gear hobbing, shaping, milling and grinding machine, through simple reconfiguring or parameter setting. Parametric automatic programming technology, high speed and high precision electronic gearbox, process database technology are studied. Based on the analysis of the gear machining process, the mathematic model on automatic programming of gear machining is established. Based on the Windows CE operating system, the CNC gear machining automatic pro
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Guofu, Xiuling Wang, and Hongyan Shen. "Study on Programming of CNC Turning and Processing Techniques." In 2nd International Conference on Civil, Materials and Environmental Sciences. Atlantis Press, 2015. http://dx.doi.org/10.2991/cmes-15.2015.146.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

miaoyuan, Xian, Jixue Xiao, Zijun Huang, and Tengjie Wang. "Exploration of CNC programming techniques for the 840Dsl system." In 4th International Conference on Mechanical, Electronics and Electrical and Automation Control (METMS 24), edited by Junxing Zhang, Zeashan Hameed Khan, and Pengfei Zeng. SPIE, 2024. http://dx.doi.org/10.1117/12.3030163.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "CNC programming"

1

Koditschek, Daniel E. Computational Neuromechanics: Programming Work in Biological Systems *AND* RHex: The CNM Hexapod. Defense Technical Information Center, 2004. http://dx.doi.org/10.21236/ada432902.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hendrick, Stephen, and Martin Mckeay. Addressing Cybersecurity Challenges in Open Source Software. The Linux Foundation, 2022. https://doi.org/10.70828/jxey9389.

Full text
Abstract:
While open source software is ubiquitous and generally regarded as being secure, software development practices vary widely across projects regarding application development practices, protocols to respond to defects, or lack of standardized selection criteria to determine which software components are more likely to be secure. Consequently, software supply chains are vulnerable to attack, with implications and challenges for open source project communities. To help improve the state of software supply chain security, new research was conducted in partnership with the Open Source Security Foun
APA, Harvard, Vancouver, ISO, and other styles
3

IDBtv: Positioning the Inter-American Development Bank as the Premier Source of Information on Development Issues in Latin America and the Caribbean (LAC). Inter-American Development Bank, 2009. http://dx.doi.org/10.18235/0008707.

Full text
Abstract:
IDBtv creates television programming on economic and social development issues in the region and distributes it through partnerships with television outlets in Latin America, the Caribbean and the United States. Content produced by IDBtv is aired on more than 125 television channels. Through a partnership with CNN and TV stations in the region, IDBtv productions bring news about IDB programs and policy priorities to millions of households in 200 countries. Through this programming, IDBtv has helped to position the Bank with decision makers, opinion leaders, and the general public, as one of th
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'CNC programming' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography