Relevant bibliographies by topics / Coating properties

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Coating properties'

Author: Grafiati
Published: 4 June 2021
Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Coating properties.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Coating properties"

1

Xu, Zhong Ping, Wen Li Han, Ying Ying Zhang, and Bei Bei Xie. "Study on Epoxy Coating which Could Be Applied on High Temperature (70°C) Steel Surface." Applied Mechanics and Materials 159 (March 2012): 311–16. http://dx.doi.org/10.4028/www.scientific.net/amm.159.311.

Full text
Abstract:
When common epoxy coatings were applied directly on high temperature (usually about 70°C) steel surface, some defects would occur in coating film, such as bubbles, pinholes, loosen and poor quality flow leveling property, etc. These defects lead to reduction in coating’s adhesion, physical properties and anti-penetrability, shorten service life of coatings greatly, making coating losing their protection function. Main reasons for those defects were analyzed briefly in this paper. In high temperature environment, solvents or other volatile organic compounds (VOC) in coatings will volatilize fas
APA, Harvard, Vancouver, ISO, and other styles
2

Čekon, Miroslav. "Thermodynamic Properties of Reflective Coatings." Advanced Materials Research 649 (January 2013): 179–82. http://dx.doi.org/10.4028/www.scientific.net/amr.649.179.

Full text
Abstract:
As a part of introducing new technologies and materials, reflective coatings are among many other materials ones, which have to be taken into account. This article presents the results of a comparative nature aiming to investigate the thermodynamic properties of selected reflective coatings on energy balance for periods of heating. In order to investigate their thermal performance at the external building surfaces dynamic outdoor testing was used. Two comparative coatings and reference standard facing coating were used for various samples. The measured data demonstrates that the representative
APA, Harvard, Vancouver, ISO, and other styles
3

Kubicki, Grzegorz, Volf Leshchynsky, Ahmed Elseddawy, et al. "Microstructure and Properties of Hydroxyapatite Coatings Made by Aerosol Cold Spraying–Sintering Technology." Coatings 12, no. 4 (2022): 535. http://dx.doi.org/10.3390/coatings12040535.

Full text
Abstract:
Hydroxyapatite is a widely used material used for the bioactivation of an implant’s surface. A promising hydroxyapatite coating approach is the kinetic deposition of powder particles. The possibility of solid-state deposition improvement through the merging of Aerosol Deposition and Low Pressure Cold Spraying techniques is a promising prospect for improving the deposition efficiency and the quality of coatings. The objective of the paper is to study the possibilities of hydroxyapatite coating structure modification through changes in the coating process and post-heat treatment. The novel Aeros
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Xinsheng, and Zhiguo Xing. "Preparation and Properties of Composite Nanoceramic NiCrBSi-TiO2/WC(Co) Coatings." Coatings 10, no. 9 (2020): 868. http://dx.doi.org/10.3390/coatings10090868.

Full text
Abstract:
Using the supersonic plasma spraying (SPS) technique, the preparation of a NiCrBSi (Ni60) coating was achieved by adding nano TiO2 in Ni60 coating with WC ceramic particles. Ni60-TiO2 (Ni60T) and Ni60-TiO2/WC coating (Ni60TW) were successfully prepared. Results show that of the three, Ni60T had the best densification, the porosity of the Ni60T coating exhibited the best value of 1.3%, and also has a stronger hardness value of 890 HV. At the same time, the coating corrosion resistance, wear coefficient, and the wear morphology of Ni60T are superior to Ni60 and Ni60TW coatings. It is added TiO2
APA, Harvard, Vancouver, ISO, and other styles
5

Szparaga, Łukasz, Przemysław Bartosik, Adam Gilewicz, Katarzyna Mydłowska, and Jerzy Ratajski. "Optimisation of Mechanical Properties of Gradient Zr–C Coatings." Materials 14, no. 2 (2021): 296. http://dx.doi.org/10.3390/ma14020296.

Full text
Abstract:
One of the key components of the designing procedure of a structure of hard anti-wear coatings deposited via Physical Vapour Deposition (PVD) is the analysis of the stress and strain distributions in the substrate/coating systems, initiated during the deposition process and by external mechanical loads. Knowledge of residual stress development is crucial due to their significant influence on the mechanical and tribological properties of such layer systems. The main goal of the work is to find the optimal functionally graded material (FGM) coating’s structure, composed of three functional layer
APA, Harvard, Vancouver, ISO, and other styles
6

Szparaga, Łukasz, Przemysław Bartosik, Adam Gilewicz, Katarzyna Mydłowska, and Jerzy Ratajski. "Optimisation of Mechanical Properties of Gradient Zr–C Coatings." Materials 14, no. 2 (2021): 296. http://dx.doi.org/10.3390/ma14020296.

Full text
Abstract:
One of the key components of the designing procedure of a structure of hard anti-wear coatings deposited via Physical Vapour Deposition (PVD) is the analysis of the stress and strain distributions in the substrate/coating systems, initiated during the deposition process and by external mechanical loads. Knowledge of residual stress development is crucial due to their significant influence on the mechanical and tribological properties of such layer systems. The main goal of the work is to find the optimal functionally graded material (FGM) coating’s structure, composed of three functional layer
APA, Harvard, Vancouver, ISO, and other styles
7

Pawłowski, Łukasz, Michał Bartmański, Aleksandra Mielewczyk-Gryń, and Andrzej Zieliński. "Effects of Surface Pretreatment of Titanium Substrates on Properties of Electrophoretically Deposited Biopolymer Chitosan/Eudragit E 100 Coatings." Coatings 11, no. 9 (2021): 1120. http://dx.doi.org/10.3390/coatings11091120.

Full text
Abstract:
The preparation of the metal surface before coating application is fundamental in determining the properties of the coatings, particularly the roughness, adhesion, and corrosion resistance. In this work, chitosan/Eudragit E 100 (chit/EE100) were fabricated by electrophoretic deposition (EPD) and both their microstructure and properties were investigated. The present research is aimed at characterizing the effects of the surface pretreatment of titanium substrate, applied deposition voltage, and time on physical, mechanical, and electrochemical properties of coatings. The coating’s microstructu
APA, Harvard, Vancouver, ISO, and other styles
8

Han, Yan, Xiaoxing Yan, and Yu Tao. "Effect of Transparent, Purple, and Yellow Shellac Microcapsules on Properties of the Coating on Paraberlinia bifoliolata Surface." Polymers 14, no. 16 (2022): 3304. http://dx.doi.org/10.3390/polym14163304.

Full text
Abstract:
In order to explore the applicability of the waterborne coating with self-repairing microcapsules based on the surface of wood boards and specify the optimal range of microcapsule content in the coating, three different kinds of shellac microcapsules (transparent shellac, purple shellac, and yellow shellac) were embedded in a waterborne acrylic coating at 0, 1.5 wt.%, 3.0 wt.%, 4.5 wt.%, 6.0 wt.%, and 7.5 wt.%. The Beli wood (Paraberlinia bifoliolata) boards were then covered with self-repairing coatings to investigate the self-repairing coating’s physical and chemical properties, aging resist
APA, Harvard, Vancouver, ISO, and other styles
9

Chang, Weihang, Hongfeng Zhang, Changling Tian, Yujun Xue, and Gang Liu. "Influence of La/Al Doping via Magnetron Sputtering on the Mechanical and Tribological Properties of TiN Coatings." Coatings 15, no. 3 (2025): 284. https://doi.org/10.3390/coatings15030284.

Full text
Abstract:
Adding alloying elements to binary nitrides enables the design of hard and tough coatings. To improve the mechanical and tribological performances of TiN-based coatings, La atoms were added to TiAlN coatings to form TiAlLaN coatings. Magnetron sputtering was conducted to prepare the TiAlLaN coatings. Thereafter, scanning electron microscopy (SEM), x-ray diffraction (XRD), nano-indentation, and a tribometer were utilized to test their microstructure, phases, and mechanical and tribological performances. Next, this study analyzed how lanthanum affected the microstructure and tribological perform
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Ying, Bian Xiao Li, and Wen Jun Zou. "The Relationship between Nanocrystalline Structure and Frictional Properties of Nanodiamond/Ni Composite Coatings by Brush Plating." Applied Mechanics and Materials 80-81 (July 2011): 683–87. http://dx.doi.org/10.4028/www.scientific.net/amm.80-81.683.

Full text
Abstract:
Nanodiamond/Ni and Ni coatings were fabricated via brush plating. Nanocrystalline structure of the composite coating was investigated by SEM and XRD. The results showed that the composite coatings are nanocrystalline structure. The hardness of the nanodiamond/Ni composite coating is higher greatly than that of Ni coating. At same time, the reasons of formation nanocrystalline were discussed, which include the nucleation rate with the increase of a high over-potential, the reciprocating motion between brush and work piece, the heterogeneous nucleation of nanodiamond. The nanodiamonds as second
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Coating properties"

1

Dutheillet, Lamonthezie Yves. "Barrier properties of epoxy coating." Thesis, Brunel University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.445939.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Prozorova, M. S., M. Y. Arseenko, M. G. Kovaleva, and Yu N. Tyurin. "Properties of nanostructured composite powder coating." Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/20595.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cakar, Ilknur. "Conductive Coating Materials." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607410/index.pdf.

Full text
Abstract:
In this study, electrically conductive coating materials composed of epoxy resin and carbon black (CB) were prepared by applying two different mixing techniques (Grinding and Mechanical Mixing). The effect of carbon black addition, ultrasonication, mixing type and surface modification of carbon black on the morphologies, electrical and mechanical properties of the composites were investigated. According to test results, Grinding Method is much more efficient and for this method, percolation concentration was found as 2 vol %. The electrical resistivity value obtained at this composition is ar
APA, Harvard, Vancouver, ISO, and other styles
4

Mahfoudhi, Marouen. "Numerical optimisation of electron beam physical vapor deposition coatings for arbitrarily shaped surfaces." Thesis, Cape Peninsula University of Technology, 2015. http://hdl.handle.net/20.500.11838/2225.

Full text
Abstract:
Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology.<br>For the last few decades, methods to improve the engine efficiency and reduce the fuel consumption of jet engines have received increased attention. One of the solutions is to increase the operating temperature in order to increase the exhaust gas temperature, resulting in an increased engine power. However, this approach can be degrading for some engine parts such as turbine blades, which are required to operate in a very hostile environment (at ≈ 90% of their melting point temperature). Thus, an additional
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Wen Fu. "Laser cladding surface treatment for enhancement of mechanical properties." Thesis, Peninsula Technikon, 2003. http://hdl.handle.net/20.500.11838/1267.

Full text
Abstract:
Thesis (MTech (Mechanical Engineering))--Peninsula Technikon, 2003<br>Systematic laser cladding experiments were performed using a mixture of a Nickel base alloy powder mixed with tungsten carbide powder (percentage contents of tungsten carbide from 10% to 40%) on EN8 steel substrate with pre-placed powder method. Laser cladding of the Nickel base alloy powder + 50% tungsten carbide powder on EN9 steel substrate was performed with powder injection method as well. A Finite Element Method for calculating the surface temperature distribution was used to help prediction of temperature
APA, Harvard, Vancouver, ISO, and other styles
6

Qian, Feng Prorok Barton Charles. "Numerical simulation and mechanical properties of free-standing silver thin films." Auburn, Ala., 2006. http://hdl.handle.net/10415/1301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tyurin, Yu, O. Ivanov, O. Kolisnichenko, et al. "Properties of nanostructured composite titanium coating on aluminium surface." Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/20488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kim, Hyunbin. "Synthesis and control of microstructure, mechanical properties, and bioactivity in biphasic and preferentially oriented calcium phosphate bioceramics." Birmingham, Ala. : University of Alabama at Birmingham, 2007. http://www.mhsl.uab.edu/dt/2007p/kim.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Otles, Serkan. "Modification of surface properties of biopowders by dry particle coating." Phd thesis, Toulouse, INPT, 2008. http://oatao.univ-toulouse.fr/7827/1/otles.pdf.

Full text
Abstract:
Powder coating is an important process for many different industries. It focuses on modifying the surface properties and/or functionality of powders that the natural product does not offer. Surface modification of particles can be done by wet and dry coating methods. However, wet coating methods have become less desirable recently because of environmental concerns over the resulting waste streams and possible VOC emissions. Dry powder coating is an alternative technology avoiding the previous drawbacks, and with the advantages of having small processing time, of being environmentally friendly
APA, Harvard, Vancouver, ISO, and other styles
10

Погребняк, Олександр Дмитрович, Александр Дмитриевич Погребняк, Oleksandr Dmytrovych Pohrebniak, et al. "Phase composition and physical properties of Co-Cr base coating." Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/20651.

Full text
Abstract:
Coating structure was mainly composed of α-fcp- and β-fcc-cobalt. Selected temperature interval for coating formation, according to XRD analysis, allowed us to form inter-metalloid compounds of CoxCry-type cobalt with chromium. Subsequent melting of a surface layer by a plasma jet resulted to doping of the coating surface by Mo atoms (compounds) from doping electrodes. It was demonstrated that essential improvement of servicing characteristics was due phase transformations induced by high-temperature plasma jet, Mo doping, redistribution of elements in the coating, and appearance of mic
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Coating properties"

1

Hocking, M. G. Metallic and ceramic coatings: Production, high temperature properties, and applications. Longman Scientific & Technical, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hocking, M. G. Metallic and ceramic coatings: Production, high temperature properties and applications. Longman Scientific & Technical, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

I, Tushinskiĭ L., ed. Coated metal: Structure and properties of metal-coating compositions. Springer, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kololuoma, Terho. Preparation of multifunctional coating materials and their applications. VTT Technical Research Centre of Finland, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

F, Bunshah R., ed. Handbook of hard coatings: Deposition technologies, properties and applications. Noyes Publications, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tushinsky, Leonid I. Coated Metal: Structure and Properties of Metal-Coating Compositions. Springer Berlin Heidelberg, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

K, Sahoo N., and Bhabha Atomic Research Centre, eds. ION assisted deposition of refractory oxide thin film coatings for improved optical and structural properties. Bhabha Atomic Research Centre, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Center, Lewis Research, ed. The Structure of ion plated films in relation to coating properties. National Aeronautics and Space Administration, Lewis Research Center, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

D, Sheffler K., Ortiz Milton, and Lewis Research Center, eds. Thermal barrier coating life prediction model development: Phase 1, final report. NASA Lewis Research Center, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Corrosion, European Federation of, and Institute of Materials, Minerals, and Mining, eds. Self-healing properties of new surface treatments. Published for the European Federation of Corrosion by Maney Pub. on behalf of the Institute of Materials, Minerals & Mining, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Coating properties"

1

Jeandin, M., H. Koivuluoto, and S. Vezzu. "Coating Properties." In Modern Cold Spray. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-16772-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schweizer, Peter M. "Physical Fluid Properties." In Premetered Coating Methods. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04180-8_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chowaniec-Michalak, Agnieszka, Sławomir Czarnecki, and Łukasz Sadowski. "Towards the Use of Waste Limestone Powder as a Filler for Epoxy Coatings in Floors: Research on Mechanical Properties." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_36.

Full text
Abstract:
AbstractThis paper presents an analysis of the mechanical properties of modified epoxy coatings used as epoxy floors. Waste mineral powder (limestone powder) was used as filler for the epoxy coating. Epoxy resin mixtures were made with waste limestone powder in amounts ranging from 0% to 29% of the mixture mass. Then, four mechanical properties were tested: hardness with the Shore D durometer, tensile and flexural strength with a standard testing machine, and pull-off strength by the pull-off method. The use of waste limestone powder as filler for epoxy coatings resulted in an improvement in h
APA, Harvard, Vancouver, ISO, and other styles
4

Schweizer, Peter M. "Specific Properties of Curtain Coating." In Premetered Coating Methods. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04180-8_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schweizer, Peter M. "Specific Properties of Slide Coating." In Premetered Coating Methods. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04180-8_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schweizer, Peter M. "Specific Properties of Slot Coating." In Premetered Coating Methods. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04180-8_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ji, S., H. Gui, G. Guan, M. Zhou, Q. Guo, and M. Y. J. Tan. "Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_14.

Full text
Abstract:
AbstractWaterborne coatings with intended functionalities have been designed by manipulating acrylic-based nanocomposites with different nanostructures. Taking advantage of the favorable structure of acrylic copolymers, three waterborne coatings with various desired properties were created through molecular engineering either by copolymerizing with other components or through nanocomposite formation. This approach was demonstrated by synthesizing acrylic-based waterborne coatings with three different nanostructures, namely homogeneous, worm-like, and spherical-like nanostructures. The properti
APA, Harvard, Vancouver, ISO, and other styles
8

Xiao, Qian. "Coating and Film-Forming Properties." In Food Hydrocolloids. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0320-4_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lei, Zhen, Hongya Li, Bingzhai Yu, and Binghan Geng. "Preparation and Properties of Graphite Surface Vitrification Y2O3 Coating." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_62.

Full text
Abstract:
AbstractThe Mo-Y2O3 composite coating was prefabricated on the surface of the graphite crucible by plasma spraying, and then the coating surface was remelted by high-power laser. The coating was subjected to SEM analysis, X-ray diffraction, bond strength testing, and molten terbium metal corrosion test. The results show, After laser cladding treatment, the problems of pores and unmelted particles on the surface of the Mo-Y2O3 coating have been significantly improved, and the porosity has been reduced to less than 1.5%, Vitrified Y2O3 with a thickness of about 80–120 μm and columnar crystal gro
APA, Harvard, Vancouver, ISO, and other styles
10

Hodul, Jakub, Rostislav Drochytka, and Tomáš Žlebek. "Chemically Resistant Concrete Coating Systems with Secondary Raw Materials." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_35.

Full text
Abstract:
AbstractNew types of highly chemically resistant coating systems, mainly developed for concrete and metal substrates were subject to experimental testing and evaluation within the project. Secondary raw materials, including solidified hazardous waste (neutralization sludge (NS)), were used as microfillers. The three-layer polymer coating systems, applied using spray technology, were tested at two quality levels – one with a high content of solidification products, and the other with a low content. The microstructure of the epoxy coatings, including an observation of the degree of contamination
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Coating properties"

1

Landgraf, H., and P. A. Peters. "Properties of Some Line Pipe Coatings for Heavy Duty Service." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89463.

Full text
Abstract:
Abstract Taking into consideration the properties required of a high-quality coating comparative testing has shown that multilayer PE coatings represent an optimum solution to the related problems. Mechanical impact resistance is the most important service property of a coating. From this point of view, PE thick-layer coatings afford a wide safety margin and can stand up to even unforeseeable mechanical loads. Decades of constant, extremely low protective current requirements for correctly laid large-diameter pipelines give proof of the excellent service properties of PE thick-layer coating.
APA, Harvard, Vancouver, ISO, and other styles
2

Kawai, Noboru, Junichi Tani, Masanori Nagai, and Hiroyuki Tanabe. "Electrochemical Properties During Film Degradation of Coated Steel." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11020.

Full text
Abstract:
Abstract Organic coatings are widely used in the steel structures of power transmission and distribution systems to protect against corrosion. Early and accurate detection of coating degradation is clearly of critical importance. We investigated two methods for evaluating coating degradation—the alternating current (AC) impedance method and the current-interrupt (Cl) method—by exposing coated steel specimens to either long-term atmospheric exposure or shorter-term salt-water immersion, and then measuring their electrochemical behavior. We also analyzed coating degradation by x-ray probe microa
APA, Harvard, Vancouver, ISO, and other styles
3

Buchheit, R. G., C. A. Drewien, M. A. Martinez, and G. E. Stoner. "Processing and Properties of Chromate-Free Conversion Coatings on Aluminum." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95390.

Full text
Abstract:
Abstract A conversion coating method has been developed based on precipitation of Li2[Al2(OH)6]2·CO3·3H2O from alkaline lithium salt solutions. The process is procedurally similar to chromate conversion coating but does not use or produce hazardous chemicals. The coating that forms is polycrystalline, continuous and conformal. The coating meets the MIL-C-5541E corrosion resistance, electrical contact resistance and paint adhesion requirements for certain aluminum alloys, but does not match the levels of performance exhibited by chromate conversion coatings. In this paper, methods for producing
APA, Harvard, Vancouver, ISO, and other styles
4

Mei, Hongyan, Jin-Woo Cho, Jae Seon Yu, et al. "Colossal optical anisotrophy in A1+xBX3 and antireflection coating designs." In Photonic and Phononic Properties of Engineered Nanostructures XV, edited by Ali Adibi, Shawn-Yu Lin, and Axel Scherer. SPIE, 2025. https://doi.org/10.1117/12.3042025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yan-bin, Huang, Liang Zhi-jie, Zhao Huo-ying, and Liu Bo. "Research on the Corrosion Resistance Properties of Electroless Ni-Cu-P Plating." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06273.

Full text
Abstract:
Abstract In order to improve the corrosion and wear resistance of the coatings of electroless plating Ni-Cu-P and broaden its application, an optimizing mathematical theory test has been applied in this research. The processing parameters have been optimized and some Ni-Cu-P coatings have been obtained with smooth and glittering appearance. At the same time, the composite complexants can prevent copper from depositing first and obtain coatings with strong adhesion. The porosity of Ni-Cu-P coating (20 μ m) ranked class 9. The coating color changes after at least 800 second when HNO3 dropping on
APA, Harvard, Vancouver, ISO, and other styles
6

Singheiser, L., R. Steinbrech, W. J. Quadakkers, D. Clemens, and R. Herzog. "Thermal Barrier Coatings – Properties and Failure Mechanisms." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00231.

Full text
Abstract:
Abstract The typical properties of thermal barrier coatings (TBCs) for industrial gas turbines as well as aero engines are described. The coating deposition process parameters have to be controlled carefully to reduce the wide scatter of physical and mechanical properties reported in the literature. Typical failure mechanisms of TBCs are described, which can be attributed to high residual stresses resulting from the manufacturing process. Oxidation of the bond coating affects significantly long-term behaviour of TBCs resulting in spallation of the alumina scale. Superimposed mechanical stresse
APA, Harvard, Vancouver, ISO, and other styles
7

Zhou, Wenjing, Thomas E. Jeffers, and Owen H. Decker. "Properties of a Novel High Tg FBE Coating for High Temperature Service." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07688.

Full text
Abstract:
Abstract A novel fusion bonded epoxy (FBE) coating based on brominated epoxy resin with a high glass transition temperature (Tg) was developed for pipeline protection. Properties of this FBE coating related to high temperature service are described in this paper. The new FBE coating has a glass transition temperature greater than 150°C as determined by differential scanning calorimetry (DSC). It performs significantly better in cathodic disbondment (CD) and water soak tests than conventional FBE coatings when tested at 95°C for 28 days. With brominated epoxy resin as the main binder, the new F
APA, Harvard, Vancouver, ISO, and other styles
8

Vuoristo, P., J. Tuominen, and J. Nurminen. "Laser Coating and Thermal Spraying - Process Basics and Coating Properties." In ITSC2005, edited by E. Lugscheider. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2005. http://dx.doi.org/10.31399/asm.cp.itsc2005p1270.

Full text
Abstract:
Abstract The paper describes the some differences of laser coating (laser cladding or laser spraying) process in comparison to thermal spraying. Laser coating is a novel coating process, which produces coatings with high density, metallurgical bonding and low heat input to the substrate. Laser coating types and coating properties are reviewed and compared with thermally sprayed coatings. Typical application areas of laser coatings are presented.
APA, Harvard, Vancouver, ISO, and other styles
9

Osawa, S., T. Itsukaichi, and R. Ahmed. "Influence of Substrate Properties on the Impact Resistance of WC Cermet Coatings." In ITSC2004, edited by Basil R. Marple and Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p0492.

Full text
Abstract:
Abstract This research delivers an integrated performance of generic coating-substrate systems under impact loading, and comprehends the understanding of underpinning failure mechanisms. This investigation thus benchmarks the coating design process for high impact stress applications. Repeated severe impacts to the coatings often result in poor performance by cracking and delamination from the coating-substrate interface. The durability and delamination resistance of coatings depend on the choice of coating and substrate materials, coating deposition process and service conditions. The design
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Xuanyong, Yi Zeng, and Chuanxian Ding. "Structure and Properties of Plasma Sprayed Wollastonite Coatings." In ITSC2003, edited by Basil R. Marple and Christian Moreau. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.itsc2003p1413.

Full text
Abstract:
Abstract Wollastonite coating deposited on Ti-6Al-4V substrate was prepared using atmospheric plasma spraying technology. Scan electron microscopy, transmission electron microscopy and X-ray diffraction were used to investigate the microstructure, surface morphology and phase compositions of coatings. Simulated body fluid tests were carried out to evaluate the bioactivity of the coating. Osteoblasts culturing test was used to examine the cytocompatibility of wollastonite coatings. The tensile bonding strength of the coating was measured with ASTM C-633 methods. The results obtained indicated t
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Coating properties"

1

Fergus, Jeffrey W. Effect of SOFC Interconnect-Coating Interactions on Coating Properties and Performance. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1050043.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Thompson. L52208 Coating and Backfill System Optimisation. Pipeline Research Council International, Inc. (PRCI), 2004. http://dx.doi.org/10.55274/r0010964.

Full text
Abstract:
This project focuses specifically on the mechanical properties of a pipeline coating in relation to the need to use imported or site-processed bedding and padding materials to create the pipelines habitat. This project assesses whether mainline and field joint coatings, typically utilized for pipeline protection, possessed sufficient mechanical resistance to withstand backfilling, commissioning and service with bedding and padding materials that had undergone minimal processing. The project was carried out in two phases, the first involved a series of large-scale tests to assess the impact, pe
APA, Harvard, Vancouver, ISO, and other styles
3

Payer, Wei, and Kempe. L51964 Corrosion Rates on Aging Pipelines. Pipeline Research Council International, Inc. (PRCI), 2002. http://dx.doi.org/10.55274/r0011323.

Full text
Abstract:
The objective of this project was to determine the pipeline steel corrosion rate beneath a sand layer and polymer coating. An analysis was performed to correlate the corrosion rate of steel with the permeability of oxygen through the coating. The effectiveness of cathodic protection was evaluated for various sand or coating conditions. The findings are based upon the results of experiments to measure (a) the corrosion rate and electrochemical behavior of steel, (b) the oxygen permeability in soils and through coatings, (c) the electrical properties of coatings and (d) the effects of carbon dio
APA, Harvard, Vancouver, ISO, and other styles
4

Miller, Mr Michael J. DTPH56-06-T-000017 In-Field Welding and Coating Protocols. Pipeline Research Council International, Inc. (PRCI), 2009. http://dx.doi.org/10.55274/r0012117.

Full text
Abstract:
Gas Technology Institute (GTI) and Edison Welding Institute (EWI) created both laboratory and infield girth weld samples to evaluate the effects of weld geometry and hydrogen off-gassing on the performance of protective coatings. Laboratory-made plate welds were used to tightly control geometric differences and in-field welds were created to mimic real-world welding conditions and hydrogen off-gassing rates. These welds were then coated and tested with accelerated corrosion techniques to evaluate the coatings' effectiveness. Simulated girth welds investigated geometric effects on the performan
APA, Harvard, Vancouver, ISO, and other styles
5

Veloso, Rita Carvalho, Catarina Dias, Andrea Resende Souza, Joana Maia, Nuno M. M. Ramos, and João Ventura. Improving the optical properties of finishing coatings for façade systems. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541592743.

Full text
Abstract:
The need to improve energy efficiency of the building stock has led to a continuous increase in the implementation of exterior thermal insulation systems, such as ETICS. Progressively, these systems are being applied with darker colours, increasing the concern for hygrothermal behaviour and durability. Despite the significant developed studies, very few reports regarding their optical properties are available. The optical and catalytic capacity turns nanomaterials into excellent candidates for use in finishing coatings with high solar reflectance with dark colours without affecting the aesthet
APA, Harvard, Vancouver, ISO, and other styles
6

Jarzynski, Jacek. In-Situ Determination of Coating Material Acoustic Properties. Defense Technical Information Center, 1996. http://dx.doi.org/10.21236/ada316228.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Been. L52121 Coating Deterioration as a Precursor for SCC. Pipeline Research Council International, Inc. (PRCI), 2004. http://dx.doi.org/10.55274/r0011093.

Full text
Abstract:
The selection and prioritization of field locations that most warrant direct examination of the pipe or other maintenance activities requires prediction of the coating conditions and the environmental conditions underneath a disbonded coating, which may support corrosion or cracking.� Current above ground measurements provide little information and to improve our ability of site-selection, this project considered a combined experimental and modeling approach to specifically identify those coating properties and environmental conditions that can lead to damaging SCC environments. Soil box exper
APA, Harvard, Vancouver, ISO, and other styles
8

Ruschau and Tossey. L52209 Application of Repair Coatings to Wet Surfaces. Pipeline Research Council International, Inc. (PRCI), 2004. http://dx.doi.org/10.55274/r0010377.

Full text
Abstract:
The field application of pipeline repair and rehabilitation coatings can be greatly dependent upon the ambient conditions on the day of the scheduled repair. In some cases, such as the application of FBE at girth welds, temporary shelters can be built over the girth weld area to protect pipe from the elements. However, for the majority of pipeline applications, coatings must be applied to a pipe surface that is not optimized for coating application. Specifically, pipelines which are in service during the repair coating operation will be at the temperature of the product flowing through them re
APA, Harvard, Vancouver, ISO, and other styles
9

Barker, Amanda, Thomas Douglas, Erik Alberts, et al. Influence of chemical coatings on solar panel performance and snow accumulation. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/48059.

Full text
Abstract:
Solar panel performance can be impacted when panel surfaces are coated with substances like dust, dirt, snow, or ice that scatter and/or absorb light and may reduce efficiency. As a consequence, time and resources are required to clean solar panels during and after extreme weather events or whenever surface coating occurs. Treating solar panels with chemical coatings that shed materials may decrease the operating costs associated with solar panel maintenance and cleaning. This study investigates three commercial coatings for use as self-cleaning glass technologies. Optical and thermal properti
APA, Harvard, Vancouver, ISO, and other styles
10

Toney, Michael F. Microstructure and Properties of Ultra-Thin Amorphous Silicon Nitride Protective Coating. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/813272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Coating properties' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography