Relevant bibliographies by topics / Collector performance parameters

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Collector performance parameters'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Collector performance parameters.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Collector performance parameters"

1

Wijeysundera, N. E., M. N. A. Hawlader, and K. Y. Foong. "Estimation of Collector Performance Parameters From Daily System Tests." Journal of Solar Energy Engineering 118, no. 1 (1996): 30–36. http://dx.doi.org/10.1115/1.2847922.

Full text
Abstract:
A test procedure to estimate the daily mean values of the linear collector characteristics, FR,(τα) and FRUL, from the measured variation of the storage tank temperature was investigated. The Levenberg-Marquardt algorithm was used for parameter estimation. Two flat-plate collectors were tested over a period of 11 days each to study the feasibility of the test procedure. The tests were conducted under variable weather conditions and inlet water temperatures. The standard deviation for the daily mean values of FR(τα) and FRUL were about 2.8 percent and 4 percent, respectively. The differences be
APA, Harvard, Vancouver, ISO, and other styles
2

Amarnath., K., Gopal. P. Dr., M. Sridharan., and T. Senthil Kumar Dr. "Performance Improvement Analysis and Simulation of Solar PV T Water Collector." International Journal of Trend in Scientific Research and Development 2, no. 4 (2018): 960–65. https://doi.org/10.31142/ijtsrd14201.

Full text
Abstract:
The objective of this paper is to review the collection of literature available on the Photo Voltaic and Thermal Solar Collector. The review paper is presented to show the comparison of findings obtained by various research works. In solar collector, the solar energy from the sun is converted in to electrical energy by means of Photo Voltaic panel and thermal energy by converting cold water into hot water. Nowadays, solar collector is preferred in many industries and house hold applications to reduce the demand of electricity by increasing the effective utilization of solar energy coming from
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Pin-Jian, Li Li, Qi-Nan Wei, and Jia-Bin Wu. "Study on Collection Performance of Hydraulic Polymetallic Nodule Collector Based on Solid–Liquid Two-Phase Flow Numerical Simulation." Applied Sciences 13, no. 23 (2023): 12729. http://dx.doi.org/10.3390/app132312729.

Full text
Abstract:
The hydraulic collector is an important device for collecting seafloor polymetallic nodules. In this study, a hydraulic polymetallic nodule collector with two acquisition nozzles and one transmission nozzle is described. The numerical model of the hydraulic collector is established based on the solid–liquid two-phase flow method, and it is verified by experimental tests. On this basis, the collection mechanism of the hydraulic collector is analyzed, and the effects of structural parameters and working parameters on its collection performance are explored. The results show that the collection h
APA, Harvard, Vancouver, ISO, and other styles
4

Amrutkar, Sunil K. "Solar Flat Plate Collector Performance By Variation of Different Parameters." IOSR Journal of Engineering 02, no. 02 (2012): 369–71. http://dx.doi.org/10.9790/3021-0202369371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mohd. Amirul Hilmi Mohd Hanoin, Nor Amirah Safiah Muhamad, Nadzirah Mohd Mokhtar, Amir Abdul Razak, and Muhamad Sukri Hadi. "Effect Of Design Parameters of Serpentine-Shaped Flat Plate Solar Collector Under Malaysia Climate Conditions." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 88, no. 1 (2021): 71–80. http://dx.doi.org/10.37934/arfmts.88.1.7180.

Full text
Abstract:
Solar thermal energy plays a vital role in the industrial sector, especially for water heating applications. Further research to improve the efficiency of flat plate solar collectors by focusing on collector design modification is imperative. This research aimed to carry out an experimental investigation on comparative designs and fabrication approaches that deal with the analysis of flat plate solar collector thermal performance, thermal efficiency, the effect of various mass flow rates, and pressure drop analyses. In this paper, a different design modification of pipe collector with serpenti
APA, Harvard, Vancouver, ISO, and other styles
6

Yan, Xiao, XiaoMing Zhang, and YiLi Wei. "Mathematical Model and Performance Analysis of Aluminum Tube Collector." Journal of Physics: Conference Series 2260, no. 1 (2022): 012049. http://dx.doi.org/10.1088/1742-6596/2260/1/012049.

Full text
Abstract:
Abstract Aluminum tube collector is a new type of collector that can be popularized, which can absorb solar energy and air energy at the same time. By analyzing the heat transfer process of aluminum tube collector, its mathematical model is established, and iterative calculation is carried out in Visual Basic to obtain the relationship between collector efficiency and different parameters. Finally, it is concluded that the thermal efficiency of aluminum tube collector is about 1.5, which is much higher than that of traditional collector; In sunny days with high ambient temperature, aluminum tu
APA, Harvard, Vancouver, ISO, and other styles
7

Marc-Alain Mutombo, N., Freddie Inambao, and Glen Bright. "Performance analysis of thermosyphon hybrid photovoltaic thermal collector." Journal of Energy in Southern Africa 27, no. 1 (2016): 28. http://dx.doi.org/10.17159/2413-3051/2016/v27i1a1564.

Full text
Abstract:
The conversion of solar irradiance into electricity by a photovoltaic module (PV) is 6– 7% of the incoming energy from the sun depending on the type of technology and the environmental parameters. More than 80% of incoming energy from the sun is reflected or absorbed by the solar module. The fraction of energy absorbed increases with solar cell temperature and the cells’ efficiency drops as a consequence. The efficiency of a PV module is improved by combining a PV module and a thermal collector in one unit, resulting in a hybrid photovoltaic and thermal collector (PV/T). The purpose of this pa
APA, Harvard, Vancouver, ISO, and other styles
8

D’Alessio, Matteo, John Lucio, Ernest Williams, et al. "Flow Analysis through Collector Well Laterals: A Case Study from Sonoma County Water Agency, California." Water 10, no. 12 (2018): 1848. http://dx.doi.org/10.3390/w10121848.

Full text
Abstract:
The Sonoma County Water Agency (SWCA) uses six radial collector wells along the Russian River west of Santa Rosa, to provide water for several municipalities and water districts in north-western California. Three collector wells (1, 2, and 6) are located in the Wohler area, and three collector wells (3, 4, and 5) are located in the Mirabel area. The objective of this paper is to highlight the performance of the three collector wells located in the Mirabel area since their construction. The 2015 investigation showed a lower performance of Collectors 3 and 4 compared to their original performanc
APA, Harvard, Vancouver, ISO, and other styles
9

De Oliveira, Alessandro Estarque, Mônica Lopes Aguiar, and Vádila Giovana Guerra. "Influence of electrospinning parameters on the morphology and performance of filter media." Conjecturas 22, no. 11 (2022): 819–35. http://dx.doi.org/10.53660/conj-1449-2a09.

Full text
Abstract:
Nanofibrous filter media used for filtration of nanoparticles dispersed in air can be produced by electrospinning of polymer solutions. However, this process is influenced by many operating variables, including the solution feed conditions. In this work, a 2³ factorial design was used to evaluate the influence of electrospinning variables on the morphology and performance characteristics of filter media composed of polyvinyl alcohol (PVA) nanofibers. The variables considered were needle-collector distance, collector rotation speed, and spinning time. The dependent variables were the median and
APA, Harvard, Vancouver, ISO, and other styles
10

Wen, Ming Yang, Shi Qing Qi, and Ning Ning Chen. "Design of Solar Collector Tubes Thermal Performance Parameters Detection Device on Embedded Linux." Applied Mechanics and Materials 446-447 (November 2013): 887–91. http://dx.doi.org/10.4028/www.scientific.net/amm.446-447.887.

Full text
Abstract:
This paper illustrates detection principle and detection method of thermal performance parameter of solar collector tubes, design a device to detect thermal performance parameter of solar collector tubes. This device adopts S3C2440 microprocessor which is developed with ARM920T core and embedded Linux system as hardware platform and develops the application program. This device could achieve real-time multitasking function detection of the thermal performance parameter of solar collector tubes, at the same time the device will transfer the data to computer via LAN communication. Due to the app
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Collector performance parameters"

1

Chalasani, Roopa. "OPTIMIZATION OF NETWORK PARAMETERS AND SEMI-SUPERVISION IN GAUSSIAN ART ARCHITECTURES." Master's thesis, University of Central Florida, 2005. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4129.

Full text
Abstract:
In this thesis we extensively experiment with two ART (adaptive resonance theory) architectures called Gaussian ARTMAP (GAM) and Distributed Gaussian ARTMAP (dGAM). Both of these classifiers have been successfully used in the past on a variety of applications. One of our contributions in this thesis is extensively experiments with the GAM and dGAM network parameters and appropriately identifying ranges for these parameters for which these architectures attain good performance (good classification performance and small network size). Furthermore, we have implemented novel modifications of these
APA, Harvard, Vancouver, ISO, and other styles
2

Naimaster, Edward J. "Effects of electrode microstructure and electrolyte parameters on intermediate temperature solid oxide fuel cell (ITSOFC) performance." Honors in the Major Thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETH/id/1298.

Full text
Abstract:
This item is only available in print in the UCF Libraries. If this is your Honors Thesis, you can help us make it available online for use by researchers around the world by following the instructions on the distribution consent form at http://library.ucf.edu/Systems/DigitalInitiatives/DigitalCollections/InternetDistributionConsentAgreementForm.pdf You may also contact the project coordinator, Kerri Bottorff, at kerri.bottorff@ucf.edu for more information.<br>Bachelors<br>Engineering and Computer Science<br>Mechanical Engineering
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Collector performance parameters"

1

Apostolidi, Eftychia, Stephanos Dritsos, Christos Giarlelis, et al. Seismic Isolation and Response Control. Edited by Andreas Lampropoulos. International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/sed019.

Full text
Abstract:
&lt;p&gt;The seismic resilience of new and existing structures is a key priority for the protection of human lives and the reduction of economic losses in earthquake prone areas. The modern seismic codes have focused on the upgrade of the structural performance of the new and existing structures. However, in many cases it is preferrable to mitigate the effects of the earthquakes by reducing the induced loads in the structures using seismic isolation and response control devices. The limited expertise in the selection and design of the appropriate system for new and existing structures is the m
APA, Harvard, Vancouver, ISO, and other styles
2

Lapčinskis, Linards. Triboelectric Effect in Polymer-based Systems: Surface Charge Formation and Energy Harvesting. RTU Press, 2022. http://dx.doi.org/10.7250/9789934227615.

Full text
Abstract:
The Doctoral Thesis has been prepared as a collection of seven thematically related scientific publications. As a result of the conducted studies an essential contribution to explanation of polymer material triboelectrification mechanisms has been created by showing the influence of parameters like hardness, elastic modulus, surface roughness, macromolecular ordering, and crosslinking degree. A novel approach to construct high-performance triboelectric generator (TEG) devices utilizing ferroelectric effect synergy with triboelectricity is outlined.
APA, Harvard, Vancouver, ISO, and other styles
3

Parker, Martin. Scripts. University of Edinburgh, 2024. http://dx.doi.org/10.2218/ed.9781836450535.

Full text
Abstract:
Scripts is a suite of four concert pieces that can work as a collection of short compositions in their own right or be played amongst other pieces in programmes of extreme and physically taxing music. At the heart of the piece is a real-time sound processing tool that applies sampling and DSP to each instrument individually and in highly varied ways. This tool responds to sound very directly; incoming audio pushes through a landscape of shifting parameters that reconfigure themselves with each note played. As such, the piece is very responsive. All sound spatialisation is ambisonic and can the
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Collector performance parameters"

1

Duque-Sarango, Paola, Cristina Cárdenas, Bryam Crespo, Christian Mera-Parra, and Sebastián Cedillo. "Smart Waters: Harnessing Machine Learning to Predict Water Quality in a Tropical Andean Watershed." In Lecture Notes in Networks and Systems. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-87065-1_24.

Full text
Abstract:
Abstract This study is based on the application of machine learning to compare regression tree models based on data with a reduced set of parameters using the National Sanitation Foundation Index (WQI NSF) to estimate water quality in the Yanuncay River watershed. Physical, chemical, and biological parameter data were collected from the watershed and equations derived from curve fits were used to calculate the WQI NSF. The results showed that the regression random forest model trained with three parameters: fecal coliforms, pH and nitrates, was the most suitable option. This model demonstrated
APA, Harvard, Vancouver, ISO, and other styles
2

Ling, Jimin, Jinhu Shen, Pengcheng Liu, et al. "Centralized Data Collection System with High-Performance and High-Availability for Northbound Wireless Parameters." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-4967-9_136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chapela-Campa, David, Ismail Benchekroun, Opher Baron, Marlon Dumas, Dmitry Krass, and Arik Senderovich. "Can I Trust My Simulation Model? Measuring the Quality of Business Process Simulation Models." In Lecture Notes in Computer Science. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-41620-0_2.

Full text
Abstract:
AbstractBusiness Process Simulation (BPS) is an approach to analyze the performance of business processes under different scenarios. For example, BPS allows us to estimate what would be the cycle time of a process if one or more resources became unavailable. The starting point of BPS is a process model annotated with simulation parameters (a BPS model). BPS models may be manually designed, based on information collected from stakeholders and empirical observations, or automatically discovered from execution data. Regardless of its origin, a key question when using a BPS model is how to assess
APA, Harvard, Vancouver, ISO, and other styles
4

Mukuna, Jean Gad. "Validation of a Model for Predicting the Performance of Evacuated Tube Solar Collectors Based on Internal Parameters of Heat Pipes." In Springer Proceedings in Earth and Environmental Sciences. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-52330-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shu, Zhong, Boer Deng, Luo Tian, et al. "Construction of SDN Network Management Model Based on Virtual Technology Application." In Proceeding of 2021 International Conference on Wireless Communications, Networking and Applications. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2456-9_28.

Full text
Abstract:
AbstractThis paper designs a virtual SDN network management model constrained by fair and equal network management information access mechanisms by analyzing the problems existing in the universality of existing SDN network management models. Starting with the three-tier structure of the SDN network management system, the main parameters involved in the network management service function, information processing and transmission channel construction in the system were strictly and normatively defined. The design of virtual nodes is regarded as the core element of the network management system,
APA, Harvard, Vancouver, ISO, and other styles
6

Salim, Sherna, and Amin Al-Habaibeh. "Exploring Windows Opening Behaviour of Occupants of Residential Buildings Using Artificial Intelligence." In Springer Proceedings in Energy. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-30960-1_29.

Full text
Abstract:
AbstractThe residential sector contributes significantly to the overall energy consumption in the UK. Occupant’s behaviour is a major factor that sometimes could be overlooked when considering energy efficiency of buildings. Although building simulations play a major role in the design of energy efficient buildings, significant discrepancies have been seen between the actual and predicted energy values in simulation models. This is because simulation does not consider occupant behaviour in many cases or finds it difficult to present such behaviour. This study attempts to investigate the reason
APA, Harvard, Vancouver, ISO, and other styles
7

Verbeek, Tamara, Ruozhu Yao, and Marwan Hassani. "Task-Free Continual Learning with Dynamic Loss for Online Next Activity Prediction." In Lecture Notes in Business Information Processing. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-82225-4_51.

Full text
Abstract:
Abstract Continual learning, known also as lifelong learning, aims at designing learning models that can continuously and autonomously adapt to varying data concepts without forgetting previously collected knowledge. Such concepts are referred to as tasks. Predictive business process monitoring, which predicts future process steps, is crucial in dynamic environments where tasks are not previously specified and processes frequently change or face unpredictability. However, many existing frameworks assume a static setting, ignoring dynamic nature and concept drifts in processes, leading to catas
APA, Harvard, Vancouver, ISO, and other styles
8

Ouyang, Daosheng, Yiqiang Zou, Yunshi Hu, Yimin You, Jing Lin, and Weiming Tong. "Intelligent Diagnosis of High-Voltage Switchgear Based on GANs and DualLSTM-DropNet." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-4856-6_9.

Full text
Abstract:
Abstract As artificial intelligence technology continues to advance in the smart grid domain, it shows significant potential for optimizing online monitoring and intelligent diagnosis of high-voltage switchgear. Online monitoring and intelligent diagnosis involve the real-time collection of characteristic parameters to assess equipment health, enabling fault diagnosis, condition evaluation, and lifespan prediction through algorithmic integration. However, challenges such as limited data samples, insufficient data validity and correlation, reliance on single diagnosis algorithms, and suboptimal
APA, Harvard, Vancouver, ISO, and other styles
9

"Modeling and Optimization of Solar Flat Plate Collector." In Modeling and Optimization of Solar Thermal Systems. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-3523-3.ch002.

Full text
Abstract:
Solar flat plate collector (SFPC) is a heat exchanger that transforms radiant solar energy into thermal energy in the form of heated fluid. The performance of SFPC is very much dependent on operating/input and response/output parameter which mainly affects the efficiency of SFPC. This chapter presented the modeling and optimization of SFPC system parameters (solar radiation [I], wind velocity [V], ambient temperature [Ta], and Inlet Temperature [Ti]) for SFPC. Modified-fuzzy set theory with MOOSRA (M-FST-MOOSRA) was employed to optimize the SFPC system. Based on results, trail no. 14 (i.e., I
APA, Harvard, Vancouver, ISO, and other styles
10

"Modeling and Optimization of Parabolic Trough Collector." In Modeling and Optimization of Solar Thermal Systems. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-3523-3.ch005.

Full text
Abstract:
Parabolic trough collector (PTC) is a concentrating collector widely used for steam cooking, water heating, and also steam power generation and desalination work. The performance of PTC is strongly depends on its process parameters and is a MCDM problem. Implementation of integrated method, that is, entropy with graph theory and matrix approach (E-GTMA) for modelling and optimization of PTC parameters to improve higher outlet temperature (To), higher heat gain (h), and higher thermal efficiency (ηth), is discussed in this chapter. Investigation results indicate the effectiveness of this techni
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Collector performance parameters"

1

Bregonzio, Valerio, and Fabrizio Martini. "Digital Monitoring System of Saipem Pipelay Vessels Productivity Parameters." In MPWT 2019. NACE International, 2019. https://doi.org/10.5006/mpwt19-15321.

Full text
Abstract:
Abstract Saipem recently took a more integrated approach at production data collection and elaboration recently launched an advanced pilot project: the deployment of a vast data collection and analysis system in the production lines of its Flagship CastorONE. Data is collected from multiple sources by means of communication infrastructures and articulated network systems that allow to connect to different machines and equipment. The most meaningful data are identified and pre-filtered. The data are then processed, aggregated and subject to advanced analytics in order to extract useful informat
APA, Harvard, Vancouver, ISO, and other styles
2

Zhu, Guangdong. "The Impact of Receiver Position Error on Parabolic Trough Collector Optical Performance." In ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/es2012-91067.

Full text
Abstract:
A newly developed analytical optical approach — First-principle OPTical Intercept Calculation (FirstOPTIC) — is employed to study the optical impact of receiver position error on parabolic trough collectors. The FirstOPTIC program performs first-principle treatment system optical error sources. By analyzing a large number of cases with varying system parameters such as the overall system optical error and the collector geometrical parameters, the paper quantitatively examines the difference between the first-principle treatment and probability approximation to receiver position error. In addit
APA, Harvard, Vancouver, ISO, and other styles
3

Gupta, Akhilesh, Ravi Kumar, and Bharat Ramani. "Performance and Economic Analysis of Double Pass Solar Air Collector." In ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/es2011-54707.

Full text
Abstract:
Solar collector is a type of heat exchanger which transfers solar radiation energy into the heat energy. Conventional solar air collectors have poor thermal efficiency primarily due to high heat losses and low convective heat transfer coefficient between the absorber plate and flowing air stream, leading to higher absorber plate temperature and greater thermal losses. Attempts have been made to improve the thermal performance of conventional solar air collectors by employing various design and flow arrangements. Double pass counter flow solar air collector with porous material in the second ai
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Chao, Xianli Li, Shijun You, and Min Ji. "Effect of Physical Parameters on Thermal Performance of Glazed Transpired Collector with Slit-Like Perforation." In 2012 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC). IEEE, 2012. http://dx.doi.org/10.1109/appeec.2012.6307743.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Saini, Prashant, Atul Dhar, and Pradeep Kumar. "A Performance Analysis of a Parabolic Trough Collector using Numerical Computation And Real-Time Parameters." In EuroSun 2022 - ISES and IEA SHC International Conference on Solar Energy for Buildings and Industry. International Solar Energy Society, 2022. http://dx.doi.org/10.18086/eurosun.2022.12.14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jayasuriya, W. J. A., A. U. C. D. Athukorala, A. T. D. Perera, M. P. G. Sirimanna, and R. A. Attalage. "Performance Analysis of Photovoltaic Thermal (PVT) Panels Considering Thermal Parameters." In ASME 2016 Power Conference collocated with the ASME 2016 10th International Conference on Energy Sustainability and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/power2016-59671.

Full text
Abstract:
Solar PVT panels are getting popular for wider spectrum of applications for concurrent heat and power generation (CHP). These panels can provide the heating demand of buildings while generating electricity which becomes ideal for building applications of urban energy systems. Energy flow analysis of such panels and performance analysis of such systems becomes essential to design PVT systems matching with the operating conditions. A number of studies have used both theoretical and experimental methods to optimize PVT. However, this task is challenging due to interrelation of CHP production base
APA, Harvard, Vancouver, ISO, and other styles
7

Diaz, Gerardo. "Performance Analysis and Design Optimization of a Mini-Channel Evacuated-Tube Solar Collector." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67858.

Full text
Abstract:
The utilization of renewable energy sources is receiving considerable attention as a non-resource-depleting approach that reduces the emissions of pollutants and green-house gases to the atmosphere. Solar thermal systems have the capability to provide heat in a sustainable way for a variety of applications due to the relatively large range of temperatures that different collector configurations can attain. Most evacuated-tube solar collectors currently found on the market consist of a u-shaped round tube, concentric round tubes in counter flow regime, or a heat-pipe. The external surface in th
APA, Harvard, Vancouver, ISO, and other styles
8

Yin, Xiao-Hong, Jin-Wen Jian, Can Yang, Tian Lei, and Tao Cheng. "Piezoelectric Performance of PVDF Composites for Transportation Engineering: A Multi-Scale Simulation Study." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24549.

Full text
Abstract:
Abstract In the present work, the poly (vinylidene fluoride) composite filled with the lead zirconium titanate (PVDF/PZT) was numerically investigated focusing on the improvement of piezoelectric performance parameters. With a multi-scale simulation strategy, effects of the PZT fillers’ orientation and length on the electrical outputs of the piezoelectric energy collectors buried in the roads were systematically examined. Specifically, at the micro-scale, based on our previous research results, Comsol Multiphysics connected with Matlab was utilized to create the unit cell of piezoelectric comp
APA, Harvard, Vancouver, ISO, and other styles
9

Serag-Eldin, M. A. "Analysis of Effect of Geometric Parameters on Performance of Solar Chimney Plants." In ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. ASMEDC, 2005. http://dx.doi.org/10.1115/ht2005-72340.

Full text
Abstract:
The paper presents a computational model for predicting the flow details within solar chimney plants. It comprises governing partial differential equations expressing conservation of mass, energy and momentum in addition to a two equation model of turbulence. Boundary-fitted-coordinates are employed to fit the wall shapes accurately. An actuator disc model is adopted to express the effect of an embedded wind turbine. The model is first applied to study the details of the flow within the collector-stack assembly. It is then applied to evaluate the effect of plant size and various geometric para
APA, Harvard, Vancouver, ISO, and other styles
10

Gendelis, Stanislavs, and Mikus Mikelsons. "EXPERIMENTAL PERFORMANCE OF SOLAR THERMAL COLLECTOR SYSTEMS IN REAL OPERATION CONDITIONS IN LATVIA." In 22nd SGEM International Multidisciplinary Scientific GeoConference 2022. STEF92 Technology, 2022. http://dx.doi.org/10.5593/sgem2022/4.1/s17.11.

Full text
Abstract:
The data from three solar thermal collector systems installed in dormitories of the University of Latvia in Riga are analysed in detail to obtain parameters that characterise the operation of such systems in real operation conditions in Riga, Latvia. All the systems were installed in 2019�2020 and the data for one full year is available for the study. The area and the power output for the observed solar thermal collectors are similar�63 m2 with 51 kW for each. The differences exist only in the orientation of the collectors depending on the building�s roof, tilt angle and the mounting combinati
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Collector performance parameters"

1

Dufur and Chapman. PR-325-05216-R01 Turbocharger Performance Monitoring. Pipeline Research Council International, Inc. (PRCI), 2008. http://dx.doi.org/10.55274/r0010002.

Full text
Abstract:
Turbocharger performance, especially on SIP-call engines, remains essentially unmeasured even though tracking information over time would provide critical information to help field engineers lower their engine emissions as well as the cost of operations. In 2006, with the assistance of funding from the Pipeline Research Council International Inc., ScavengeTech LLC developed and field tested a turbocharger monitoring system that consisted of a set of analog sensors to measure key turbocharger performance parameters and hardware to interface the sensor outputs to a computer. The collected data w
APA, Harvard, Vancouver, ISO, and other styles
2

Kowalski, Angel. PR-186-163606-R01 Establishing the Potential Severity of Various Cathodic Protection Shielding Parameters. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011534.

Full text
Abstract:
A semi-quantitative scoring protocol was developed to identify pipeline systems with the highest relative susceptibility to coating CP shielding. The scoring protocol takes into consideration the type of coatings, surface preparation, types of soils, weather conditions and pipeline characteristics. The protocol was tested over pipeline cases provided by pipeline operators. The users are encouraged to use the scoring protocol to screen, prioritize pipeline systems susceptible to coating CP shielding, and collect critical data in order to improve the performance of the tool with the goal to mini
APA, Harvard, Vancouver, ISO, and other styles
3

Dufur and Chapman. PR-325-07205-R01 Development of a Turbocharger Monitoring System. Pipeline Research Council International, Inc. (PRCI), 2008. http://dx.doi.org/10.55274/r0010771.

Full text
Abstract:
Turbocharger performance, especially on SIP-call engines, remains essentially unmeasured even though tracking information over time would provide critical information to help field engineers lower their engine emissions as well as the cost of operations. In 2006, with the assistance of funding from the Pipeline Research Council International Inc., ScavengeTech LLC developed and field tested a turbocharger monitoring system that consisted of a set of analog sensors to measure key turbocharger performance parameters and hardware to interface the sensor outputs to a computer. The collected data w
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Jusang, John E. Haddock, and Jongmyung Jeon. Development of Volumetric Acceptance and Percent Within Limits (PWL) and Criteria for Stone Metrix Asphalt (SMA) Mixtures in Indiana. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317580.

Full text
Abstract:
SMA is to be designed based on SMA volumetric properties in terms of air voids content (Va), voids in the mineral aggregate (VMA), and adequate stone-on-stone contact. For construction quality assurance (QA) purposes, INDOT currently accepts SMAs based on aggregate gradation and asphalt binder content. Thus, there is a discrepancy between SMA design criteria and construction acceptance. To better align design and construction, it is necessary to consider SMA volumetric properties in the use of QA. For HMA mixtures, INDOT has already transitioned from volumetric QA acceptance procedures to PWL.
APA, Harvard, Vancouver, ISO, and other styles
5

Lahav, Ori, Albert Heber, and David Broday. Elimination of emissions of ammonia and hydrogen sulfide from confined animal and feeding operations (CAFO) using an adsorption/liquid-redox process with biological regeneration. United States Department of Agriculture, 2008. http://dx.doi.org/10.32747/2008.7695589.bard.

Full text
Abstract:
The project was originally aimed at investigating and developing new efficient methods for cost effective removal of ammonia (NH₃) and hydrogen sulfide (H₂S) from Concentrated Animal Feeding Operations (CAFO), in particular broiler and laying houses (NH₃) and hog houses (H₂S). In both cases, the principal idea was to design and operate a dedicated air collection system that would be used for the treatment of the gases, and that would work independently from the general ventilation system. The advantages envisaged: (1) if collected at a point close to the source of generation, pollutants would
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Collector performance parameters' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography