Log in

Relevant bibliographies by topics / Common wireless interface / Journal articles

To see the other types of publications on this topic, follow the link: Common wireless interface.

Journal articles on the topic 'Common wireless interface'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 47 journal articles for your research on the topic 'Common wireless interface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Węglarski, Mariusz, Piotr Jankowski-Mihułowicz, Grzegorz Pitera, Dominik Jurków, and Mateusz Dorczyński. "LTCC Flow Sensor with RFID Interface." Sensors 20, no. 1 (2020): 268. http://dx.doi.org/10.3390/s20010268.

Full text

Abstract:

The idea of battery-less flow sensors and their implementation in wireless measurement systems is presented in this research article. The authors take advantage of their latest achievements in the Low Temperature Co-fired Ceramic (LTCC) technology, RadioFrequency Identification (RFID) technique, and increasing availability of low power electronics in order to get rid of the need to use electrochemical cells in a power supply unit of the elaborated device. To reach this assumption, special care has to be put on the energy balance in such an autonomous sensor node. First of all, the new concept

APA, Harvard, Vancouver, ISO, and other styles

2

Ju, Yun, Yan Bai, Yao Chun Zhu, Ren Shu Wang, and Yu Kai Li. "Heterogeneous Wireless-Wired Sensor Network Communication Based on Mobile IP." Advanced Materials Research 798-799 (September 2013): 431–34. http://dx.doi.org/10.4028/www.scientific.net/amr.798-799.431.

Full text

Abstract:

This paper proposes a communication scheme for heterogeneous wireless and wired sensor networks. In the scheme, through a common protocol to shield the differences of different types of wireless-wired networks, to realize the mobility management for heterogeneous wireless and wired network environment. In addition, access technology of the second layer can be shielded, and provided a unified interface for upper protocol layers. From the theoretical and simulative perspectives, the paper analyzes the performance parameters, including the mobile function, throughput capacity, energy consumption

APA, Harvard, Vancouver, ISO, and other styles

3

Aloisio, Alessandro, and Alfredo Navarra. "Constrained Connectivity in Bounded X-Width Multi-Interface Networks." Algorithms 13, no. 2 (2020): 31. http://dx.doi.org/10.3390/a13020031.

Full text

Abstract:

As technology advances and the spreading of wireless devices grows, the establishment of interconnection networks is becoming crucial. Main activities that involve most of the people concern retrieving and sharing information from everywhere. In heterogeneous networks, devices can communicate by means of multiple interfaces. The choice of the most suitable interfaces to activate (switch-on) at each device results in the establishment of different connections. A connection is established when at its endpoints the devices activate at least one common interface. Each interface is assumed to consu

APA, Harvard, Vancouver, ISO, and other styles

4

Devadevan V. and Suresh Sankaranarayanan. "Forest Fire Information System Using Wireless Sensor Network." International Journal of Agricultural and Environmental Information Systems 8, no. 3 (2017): 52–67. http://dx.doi.org/10.4018/ijaeis.2017070104.

Full text

Abstract:

Forest fire is the most common hazard which is a great threat to the ecosystem. Remote Sensing and GIS are widely used for forest fire detection. Wireless Sensor Network (WSN) is an emerging technology which is used to monitor environmental parameters towards alerting forest department officers for prevention or control. In this research, the authors developed Forest Fire Information System (FFIS) that provides interface to monitor, assess and analyze the forest fire data emanating from WSN which is a part of Intelligent Forest Fire Detection System. The information system also maintains neces

APA, Harvard, Vancouver, ISO, and other styles

5

Krorakai, Karnpimon, Supannika Klangphukhiew, Sirinan Kulchat, and Rina Patramanon. "Smartphone-Based NFC Potentiostat for Wireless Electrochemical Sensing." Applied Sciences 11, no. 1 (2021): 392. http://dx.doi.org/10.3390/app11010392.

Full text

Abstract:

Most electrochemical sensing requires affordable, portable and easy-to-use electrochemical devices for use in point-of-care testing and resource-limited settings. This work presents the design and evaluates the analytical performance of a near-field communication (NFC) potentiostat, a flat card-sized electrochemical device containing a microchip for electrical analysis and an NFC antenna for smartphone connection. The NFC interface is a wireless connection between the microchip and smartphone to simplify measuring units and make the potentiostat into a passive operated device, running without

APA, Harvard, Vancouver, ISO, and other styles

6

Degbedzui, Derek Kweku, Michael Tetteh, Elsie Effah Kaufmann, and Godfrey A. Mills. "BLUETOOTH-BASED WIRELESS DIGITAL STETHOSCOPE WITH MOBILE INTEGRATION." Biomedical Engineering: Applications, Basis and Communications 30, no. 03 (2018): 1850010. http://dx.doi.org/10.4015/s1016237218500102.

Full text

Abstract:

Acoustic stethoscopes are used to monitor signals from patients. Incidentally, the connecting tube between the chest-piece and the ear-piece of common stethoscopes is known to serve as a medium for transmitting pathogens from patients to physicians or from one patient to another patient. This work presents a wireless stethoscope design with mobile integration that transmits heart sounds to mobile devices for evaluation and analysis, thus, eliminates the connecting tube. This is an extension of the previous work that presented the proof of concept of a wireless stethoscope with Bluetooth transm

APA, Harvard, Vancouver, ISO, and other styles

7

Chupaev, A. V., R. S. Zaripova, R. R. Galyamov, and A. Y. Sharifullina. "The use of industrial wireless networks based on standard ISA-100.11a and protocol WirelessHART in process control." E3S Web of Conferences 124 (2019): 03013. http://dx.doi.org/10.1051/e3sconf/201912403013.

Full text

Abstract:

This article considers wireless technologies in the field of automation of technological processes and production in the energy, chemical, petrochemical and oil refining, gas, railway, mining, metallurgical and other industries where the use of wireless industrial devices is necessary due to specific features. Wireless technologies provide the ability to connect measuring devices directly to the wireless network with further transfer of information through a wireless gateway to an automated control system. This article will discuss the types of wireless networks that are classified according t

APA, Harvard, Vancouver, ISO, and other styles

8

Alsufyani, Azhar Abbad, and Khaled H. Almotairi. "An Adaptive Common Control Channel MAC with Transmission Opportunity in IEEE 802.11ac." Journal of ICT Research and Applications 14, no. 3 (2021): 240–56. http://dx.doi.org/10.5614/itbj.ict.res.appl.2021.14.3.3.

Full text

Abstract:

Spectral utilization is a major challenge in wireless ad hoc networks due in part to using limited network resources. For ad hoc networks, the bandwidth is shared among stations that can transmit data at any point in time. It Â is important to maximize the throughput to enhance the network service. In this paper, we propose an adaptive multi-channel access with transmission opportunity protocol for multi-channel ad hoc networks, called AMCA-TXOP. For the purpose of coordination, the proposed protocol uses an adaptive common control channel over which the stations negotiate their channel select

APA, Harvard, Vancouver, ISO, and other styles

9

Zabcikova, Martina. "Visual and Auditory Stimuli Response, Measured by Emotiv Insight Headset." MATEC Web of Conferences 292 (2019): 01024. http://dx.doi.org/10.1051/matecconf/201929201024.

Full text

Abstract:

Brain-Computer Interface (BCI) is a very attractive area and common trend worldwide. The electroencephalographic (EEG) technology is being used by BCI systems that process brain signals through computer algorithms. EEG-based BCI has become an important tool for real-time analysis of brain activity. This article examines the usability and quality of the signals recorded using the Emotiv device. To examine brain activity, visual and auditory stimuli were presented to the subjects and responses was observed using wireless noninvasive EEG device Emotiv Insight. To measure signals the free version

APA, Harvard, Vancouver, ISO, and other styles

10

Zandieh, S. O., A. Reuveny, S. Pearson, et al. "1207 Keep It Simple: Wireless Patches For Home Sleep Diagnostics." Sleep 43, Supplement_1 (2020): A461. http://dx.doi.org/10.1093/sleep/zsaa056.1201.

Full text

Abstract:

Abstract Introduction Despite growing use of home sleep testing for the diagnosis of obstructive sleep apnea (OSA), there are significant barriers including limited availability, high cost, and complex wires making it difficult for patients to use on their own. The objective of this study was to evaluate a new flexible, thin, and wireless adhesive patch (proprietor sensors, TatchSleep Pro [TSP]) for the detection of OSA and compare the validity to overnight polysomnography (PSG). The TSP transmits data wirelessly to a smartphone app which in turn uploads the data to a cloud server. Data is pre

APA, Harvard, Vancouver, ISO, and other styles

11

Abadi, Sarosa Castrena, Anton Prafanto, Mindit Eriyadi, Aris Suryadi, and Givy Devira Ramadi. "PENERAPAN PROTOKOL PUBLISH / SUBSCRIBE MESSAGING SYSTEM PADA SISTEM WIRELESS BUILDING NETWORK BERBASIS NRF24L01." JTT (Jurnal Teknologi Terapan) 6, no. 2 (2020): 172. http://dx.doi.org/10.31884/jtt.v6i2.275.

Full text

Abstract:

Wireless sensor network is a common method used in the design of shared resource interconnection infrastructure at a location point to provide optimal performance. The main factor in the design of a wireless sensor network (WSN) communication protocol in the form of coordination optimization efforts between nodes, one of the effective methods that can be made to achieve such conditions is the provision of nodes using the publish / subscribe messaging system protocol. This research discusses the implementation of publish / subscribe messaging system protocol on wireless building network system

APA, Harvard, Vancouver, ISO, and other styles

12

Maroşan, Iosif-Adrian, and George Constantin. "Wireless communication based on Raspberry pi and Codesys for mobile robots using IoT technology." MATEC Web of Conferences 343 (2021): 08008. http://dx.doi.org/10.1051/matecconf/202134308008.

Full text

Abstract:

The industrial environment is going through exponential changes, due to the diversity of technological solutions that appear more and more frequently and the increase of productivity at increasing capacities. Due to this fact in the industrial area the number of devices, processing systems, collaborative robots, mobile robots and industrial equipment is increasing more and more. Consequently, there is a need for communication and connectivity of entities, common physical or virtual functioning and decision making, all of which are fundamental to the transition to the new concept of Industry 4.

APA, Harvard, Vancouver, ISO, and other styles

13

Copot, Dana, Mihaela Ghita, and Clara Ionescu. "Simple Alternatives to PID-Type Control for Processes with Variable Time-Delay." Processes 7, no. 3 (2019): 146. http://dx.doi.org/10.3390/pr7030146.

Full text

Abstract:

Process industries include chemicals, petrochemicals, pulp and paper, steel, minerals, food, and power generation industries. Although diverse, all of these share common dynamics in terms of continuous variables and rely on the same measurements, e.g., level, flow, temperature, and pressure. They also have common actuators, such as valves and pumps. Additionally, they have variable time delays from process dynamics, such as mixing effects, measurement lines, or wireless data communication protocols. Processes with variable time delay can often lead to poor performance and instability. This pap

APA, Harvard, Vancouver, ISO, and other styles

14

Farooq, Muhammad, Talha Iqbal, Patricia Vazquez, et al. "Thin-Film Flexible Wireless Pressure Sensor for Continuous Pressure Monitoring in Medical Applications." Sensors 20, no. 22 (2020): 6653. http://dx.doi.org/10.3390/s20226653.

Full text

Abstract:

Physiological pressure measurement is one of the most common applications of sensors in healthcare. Particularly, continuous pressure monitoring provides key information for early diagnosis, patient-specific treatment, and preventive healthcare. This paper presents a thin-film flexible wireless pressure sensor for continuous pressure measurement in a wide range of medical applications but mainly focused on interface pressure monitoring during compression therapy to treat venous insufficiency. The sensor is based on a pressure-dependent capacitor (C) and printed inductive coil (L) that form an

APA, Harvard, Vancouver, ISO, and other styles

15

Zhu, Xiwen, Qiang Fu, Ruimo Yang, and Yufeng Zhang. "A High Power-Conversion-Efficiency Voltage Boost Converter with MPPT for Wireless Sensor Nodes." Sensors 21, no. 16 (2021): 5447. http://dx.doi.org/10.3390/s21165447.

Full text

Abstract:

A high power-conversion-efficiency voltage boost converter with MPPT for wireless sensor nodes (WSNs) is proposed in this paper. Since tiny wireless sensor nodes are all over complex environments, an efficient power management system (PMS) must be equipped to achieve long-term self-power supply and maintain regular operation. It is common to use Photovoltaic cells (PV) to harvest sunlight in the environment. However, most existing interface boost integrated circuits for the PV cell have low efficiency. This paper presents a voltage boost converter (VBC) with high power conversion efficiency (P

APA, Harvard, Vancouver, ISO, and other styles

16

Qasim, H. H., A. E. Hamza, H. H. Ibrahim, H. A. Saeed, and M. I. Hamzah. "Design and implementation home security system and monitoring by using wireless sensor networks WSN/internet of things IOT." International Journal of Electrical and Computer Engineering (IJECE) 10, no. 3 (2020): 2617. http://dx.doi.org/10.11591/ijece.v10i3.pp2617-2624.

Full text

Abstract:

The dramatic advancments on communication and networking technologies have led to the emergence of Internet-of-Things (IoT). IoT technology has opened the door for various applications. In particular, the home automation was one of the common applications that took the advantage of IoT. Several research efforts have addressed the home automation system using IoT covering wide range of functionalities. One of the concerning tasks is providing a secure system that can give alarms for suspicious activities within the house. This paper presents a secure house system based on IoT where several acti

APA, Harvard, Vancouver, ISO, and other styles

17

Kitchen, Jennifer, Soroush Moallemi, and Sumit Bhardwaj. "Multi-chip module integration of Hybrid Silicon CMOS and GaN Technologies for RF Transceivers." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2019, DPC (2019): 000339–82. http://dx.doi.org/10.4071/2380-4491-2019-dpc-presentation_tp1_010.

Full text

Abstract:

Digital transceiver architectures offer the potential for achieving wireless hardware flexibility to frequency and modulation scheme for future-generation communications systems. Additionally, digital transmitters lend themselves to the use of switch-mode power amplifiers, which can have significantly higher efficiency than their linear counterparts. Two proposed architectures for realizing digital transmitters will be described in this work, both of which employ a hybrid combination of silicon integrated circuits (IC) and a power technology (e.g. GaN). This hybrid architecture takes advantage

APA, Harvard, Vancouver, ISO, and other styles

18

Lin, Chin-Teng, Chi-Hsien Liu, Po-Sheng Wang, Jung-Tai King, and Lun-De Liao. "Design and Verification of a Dry Sensor-Based Multi-Channel Digital Active Circuit for Human Brain Electroencephalography Signal Acquisition Systems." Micromachines 10, no. 11 (2019): 720. http://dx.doi.org/10.3390/mi10110720.

Full text

Abstract:

A brain–computer interface (BCI) is a type of interface/communication system that can help users interact with their environments. Electroencephalography (EEG) has become the most common application of BCIs and provides a way for disabled individuals to communicate. While wet sensors are the most commonly used sensors for traditional EEG measurements, they require considerable preparation time, including the time needed to prepare the skin and to use the conductive gel. Additionally, the conductive gel dries over time, leading to degraded performance. Furthermore, requiring patients to wear we

APA, Harvard, Vancouver, ISO, and other styles

19

Sarker, Mahidur R., Azah Mohamed, and Ramizi Mohamed. "Modelling and Simulation an AC-DC Rectifier Circuit Based on Piezoelectric Vibration Sensor for Energy Harvesting System." Applied Mechanics and Materials 785 (August 2015): 131–35. http://dx.doi.org/10.4028/www.scientific.net/amm.785.131.

Full text

Abstract:

This paper presents the modeling of a full-wave rectifier circuit based on piezoelectric vibration transducer for energy-harvester system. Piezoelectric vibration crystals are a viable means of harvesting energy for low-power embedded systems e.g. wireless sensor network. Distinct power handling circuits are assessed with the presence of piezoelectric vibration based energy harvesting transducer. Inside the interface circuit, the voltage should be started up when the AC input voltage is very low to supply a regulated DC voltage up to 2V. An active technique is chosen to design an ultra-low pow

APA, Harvard, Vancouver, ISO, and other styles

20

Park, Youngki, Hyunsik Yang, Thanh Dinh, and Younghan Kim. "Design and implementation of a container-based virtual client architecture for interactive digital signage systems." International Journal of Distributed Sensor Networks 13, no. 7 (2017): 155014771771786. http://dx.doi.org/10.1177/1550147717717864.

Full text

Abstract:

Interactive digital signage is an important Internet of things application and has been becoming a common type of human–machine interface for multiple users. By integrating with wireless sensor networks, a digital signage system can provide smart features and on-demand contents to users. However, the performance of current interactive digital signage systems depends heavily on the server. An increasingly high number of digital signage clients and sensor devices attached to the system generating a huge amount of traffic flowed to the server may create bottleneck, management and scalability issu

APA, Harvard, Vancouver, ISO, and other styles

21

Christensen, Paul, Sishir Subedi, Heather Hendrickson, et al. "Updates to a Lab-Developed Bioinformatics Pipeline and Application for Interpretation of Clinical Next-Generation Sequencing Panels." American Journal of Clinical Pathology 152, Supplement_1 (2019): S9—S10. http://dx.doi.org/10.1093/ajcp/aqz112.019.

Full text

Abstract:

Abstract Objectives Our goal was to enhance our next-generation sequencing (NGS) molecular oncology workflow from sequencing to analysis through improvements to our custom-built and previously described NGS application. Methods Over 1 year, we collected feedback regarding workflow pain-points and feature requests from all end users of our NGS application. The application consists of a series of scripted pipelines, a MySQL database, and a Java Graphic User Interface (GUI); the end users include molecular pathologists (MPs), medical technologist/medical laboratory technologists (MTs/MLTs), and t

APA, Harvard, Vancouver, ISO, and other styles

22

Kang, Yoohwa, Changki Kim, Donghyeok An, and Hyunsoo Yoon. "Multipath transmission control protocol–based multi-access traffic steering solution for 5G multimedia-centric network: Design and testbed system implementation." International Journal of Distributed Sensor Networks 16, no. 2 (2020): 155014772090975. http://dx.doi.org/10.1177/1550147720909759.

Full text

Abstract:

Various technologies have been developed for the efficient use of the multiple radio access technologies resource at the radio access network level or other network levels to improve user service quality in mobile communication networks. In long-term evolution, mobile carriers are commercializing radio access network-level traffic aggregation technologies such as licensed-assisted access-long-term evolution, long-term evolution-unlicensed, and long-term evolution-wireless local area network aggregation, which use the multi-accesses of the 3rd Generation Partnership Project and WiFi, and the mu

APA, Harvard, Vancouver, ISO, and other styles

23

Newman, Peggy, Holger Dettki, and Lee Belbin. "What Went Where When? Representing Animal Movements as Simple Darwin Core Occurrences." Biodiversity Information Science and Standards 2 (May 21, 2018): e25664. http://dx.doi.org/10.3897/biss.2.25664.

Full text

Abstract:

To usefully describe sensor deployments on animals is a major challenge for advocates of data standards. Bio-logging studies also need to be documented in a standard manner to facilitate discovery and determine relevance? For systems aggregating biodiversity occurrence records, the use of the Darwin Core standard (Wieczorek et al. 2012) to express species occurrences is near ubiquitous. Bio-logging studies are universally multiple instances of species occurrences that output high quality spatial and temporal data recorded by specialists. There are a lot of benefits to summarising these studies

APA, Harvard, Vancouver, ISO, and other styles

24

Bell, Kevin, Chukwudi Onyeukwu, Michael McClincy, et al. "Verification of a Portable Motion Tracking System for Remote Management of Physical Rehabilitation of the Knee." Sensors 19, no. 5 (2019): 1021. http://dx.doi.org/10.3390/s19051021.

Full text

Abstract:

Rehabilitation following knee injury or surgery is critical for recovery of function and independence. However, patient non-adherence remains a significant barrier to success. Remote rehabilitation using mobile health (mHealth) technologies have potential for improving adherence to and execution of home exercise. We developed a remote rehabilitation management system combining two wireless inertial measurement units (IMUs) with an interactive mobile application and a web-based clinician portal (interACTION). However, in order to translate interACTION into the clinical setting, it was first nec

APA, Harvard, Vancouver, ISO, and other styles

25

Zhou, Lei, Zhengjun Qiu, and Yong He. "Application of WeChat Mini-Program and Wi-Fi SoC in Agricultural IoT: A Low-Cost Greenhouse Monitoring System." Transactions of the ASABE 63, no. 2 (2020): 325–37. http://dx.doi.org/10.13031/trans.13499.

Full text

Abstract:

HighlightsA quick solution for developing and deploying custom agricultural IoT systems is proposed.Low-cost and high-performance devices are used for the design of sensor nodes.A mobile application based on WeChat Mini-Program is developed for device and data management.The proposed system brings convenience to both users and developers.Abstract. Increasing demand for automatic management of agricultural production and real-time remote monitoring has increased the need for smart devices, wireless technologies, and sensors. The internet of things (IoT) has emerged as a common technology for th

APA, Harvard, Vancouver, ISO, and other styles

26

Garroppo, Rosario G., Loris Gazzarrini, Stefano Giordano, and Luca Tavanti. "Experimental Evaluation of a SIP-Based Home Gateway with Multiple Wireless Interfaces for Domotics Systems." Journal of Computer Networks and Communications 2012 (2012): 1–15. http://dx.doi.org/10.1155/2012/190639.

Full text

Abstract:

In modern houses, the presence of sensors and actuators is increasing, whilecommunication servicesandentertainment systemshad long since settled into everyday life. The utilization of wireless communication technologies, such as ZigBee, Wi-Fi, and Bluetooth, is attractive because of their short installation times and low costs. The research is moving towards the integration of the various home appliances and devices into a single domotics system, able to exploit the cooperation among the diverse subsystems and offer the end-user a single multiservice platform. In this scenario, the paper prese

APA, Harvard, Vancouver, ISO, and other styles

27

Aguilar-Rivera, Marcelo, Dieanira T. Erudaitius, Vincent M. Wu, et al. "Smart Electronic Eyedrop Bottle for Unobtrusive Monitoring of Glaucoma Medication Adherence." Sensors 20, no. 9 (2020): 2570. http://dx.doi.org/10.3390/s20092570.

Full text

Abstract:

Glaucoma, the leading cause of irreversible blindness, affects >70 million people worldwide. Lowering intraocular pressure via topical administration of eye drops is the most common first-line therapy for glaucoma. This treatment paradigm has notoriously high non-adherence rates: ranging from 30% to 80%. The advent of smart phone enabled technologies creates promise for improving eyedrop adherence. However, previous eyedrop electronic monitoring solutions had awkward medication bottle adjuncts and crude software for monitoring the administration of a drop that adversely affected their abili

APA, Harvard, Vancouver, ISO, and other styles

28

Gray, Chrispin Alfred, Leith Campbell, Robert Ayre, and Kerry Hinton. "Energy-Efficient Network Protocols for Domestic IoT Application Design." Journal of Telecommunications and the Digital Economy 7, no. 2 (2019): 50–73. http://dx.doi.org/10.18080/jtde.v7n2.184.

Full text

Abstract:

In the future Internet of Things, many common household devices will have communications interfaces added. The gathering of data from these household IoT-enabled devices will incur an energy cost and, in this paper, we investigate the impact of different communications technologies and protocols on that cost. As a first step towards energy-efficient design, we have measured the power consumption of several popular wireless interfaces – Bluetooth (Classic and Low Energy), ZigBee, Wi-Fi and 433 MHz module (RF433). We then combine these measurements through the example of a simple domestic stock

APA, Harvard, Vancouver, ISO, and other styles

29

Gladence, L. Mary, M. D. Gunasekhar, M. Sai Shankar, V. Maria Anu, and Jany Shabu. "Wireless Net-Work Based Gesture-Controlled Robot." Journal of Computational and Theoretical Nanoscience 17, no. 8 (2020): 3534–38. http://dx.doi.org/10.1166/jctn.2020.9226.

Full text

Abstract:

Much after more than many years of information gadgets advancement, numerous individuals despite everything discover the association with the PCs and robots an awkward encounter. Endeavours ought to be made to adjust PCs and robots to our regular methods for correspondence: discourse and non-verbal communication. The point of this work is to actualize an ongoing order framework through hand movement affirmation, using all around helpful gear and low costing sensor like a direct raspberry-pie and a USB webcam, so any customer can use it in organizations or at home. The reason of our philosophy

APA, Harvard, Vancouver, ISO, and other styles

30

GRABOWSKI, Andrzej, and Paweł ZAWADZKI. "An ICT Tool for Visualising and Archiving Measurement Data Collected using Mobile Sensors." Problems of Mechatronics Armament Aviation Safety Engineering 10, no. 3 (2019): 79–89. http://dx.doi.org/10.5604/01.3001.0013.4806.

Full text

Abstract:

Many sectors require the use of dedicated ICT systems to collect data from dispersed and oftentimes moving measurement systems. This is associated with the increasingly-common use of unmanned vehicles, mostly flying ones, carrying various measurement systems, such as concentration sensors detecting selected gases. The measurement data can be transmitted wirelessly to a central server. The article presents the architecture of a universal ICT tool that, owing to its flexible application programming interface, can be used for integrating, archiving and visualising data coming from a heterogeneous

APA, Harvard, Vancouver, ISO, and other styles

31

Chauvenet, Cedric, Bernard Tourancheau, Denis Genon-Catalot, Pierre-Emmanuel Goudet, and Mathieu Pouillot. "Interoperable IPv6 Sensor Networking over PLC and RF Media." International Journal of Business Data Communications and Networking 6, no. 4 (2010): 1–20. http://dx.doi.org/10.4018/jbdcn.2010100101.

Full text

Abstract:

The evolution of technology has made the connection of all types of devices to IP networks possible. In this paper, the authors investigate the possible usage of IPv6 in sensor networks connected through the Power Line Communication (PLC) non-wireless medium and demonstrate possible interoperability. This work is based on the adaptation of the IEEE 802.15.4 standard protocol constrained by the low-power, lossy and low data-rate context of PLC transceiver that uses pulse modulation. The aim is to provide interoperability features with other media using a robust and reliable communication stack.

APA, Harvard, Vancouver, ISO, and other styles

32

Millar, Richard C. "Integrated Instrumentation and Sensor Systems Enabling Condition-Based Maintenance of Aerospace Equipment." International Journal of Aerospace Engineering 2012 (2012): 1–6. http://dx.doi.org/10.1155/2012/804747.

Full text

Abstract:

The objective of the work reported herein was to use a systems engineering approach to guide development of integrated instrumentation/sensor systems (IISS) incorporating communications, interconnections, and signal acquisition. These require enhanced suitability and effectiveness for diagnostics and health management of aerospace equipment governed by the principles of Condition-based maintenance (CBM). It is concluded that the systems engineering approach to IISS definition provided clear benefits in identifying overall system requirements and an architectural framework for categorizing and

APA, Harvard, Vancouver, ISO, and other styles

33

Corbo, M., M. Morichi, E. Fanchini, G. Mini, A. Pepperosa, and G. Mangiagalli. "Modular and Integrated Sensor Network of Intelligent Radiation Monitor Systems for Radiological and Nuclear Threat Response." EPJ Web of Conferences 225 (2020): 07005. http://dx.doi.org/10.1051/epjconf/202022507005.

Full text

Abstract:

Increased sensitivity to nuclear safety and security issues has prompted public entities and private institutions to maximize their capability to rapidly assess risks and intervene in the case of accident or threat. Quick intervention and response are achieved through nuclear measurements via airborne, land, and underwater systems. A network of cohesive, well-integrated and easy deployable radiation monitoring systems combined with real-time analysis of data is essential to facilitate and enhance the decision-making process during these most critical moments enhancing the quality of the manage

APA, Harvard, Vancouver, ISO, and other styles

34

Setiawan, Rudi, Sabar Sabar, and Madi Madi. "Design of An Active Power Ankle-Foot Orthosis with Myoelectric Control for Drop-Foot Rehabilitation." International Journal of Electrical, Energy and Power System Engineering 4, no. 2 (2021): 139–44. http://dx.doi.org/10.31258/ijeepse.4.2.139-144.

Full text

Abstract:

Drop-foot is an inability to lift the foot when walking due to muscle weakness or paralysis. One of the common rehabilitation aids for stroke sufferers with drop-foot is Ankle Foot Orthosis (AFO). This tool serves as a stabilizer for road pattern balance. However, most of the AFO used is passive, so it doesn't help users run properly. Therefore, an active AFO system has been designed as a rehabilitation aid. This AFO is designed with motor control from myoelectric feedback signal (EMG) and also a semi-dynamic ankle joint so that it is more flexible to help the user when stepping. The AFO movem

APA, Harvard, Vancouver, ISO, and other styles

35

Крыгин, Сергей Сергеевич, та Юрий Иванович Торба. "Измерение напряженно-деформированного состояния деталей АГТД методом тензометрии". Aerospace technic and technology, № 4sup2 (27 серпня 2021): 44–51. http://dx.doi.org/10.32620/aktt.2021.4sup2.06.

Full text

Abstract:

The subject of study in the article is various methods of measuring the stress-strain state of AGTE parts by the tensometry method. Differences were revealed when measuring the stress-strain state of rotor and stator parts, in different frequency ranges (study of static, static-dynamic and dynamic deformations). Methods for compensating or reducing the influence of external factors on the measurement results, such as temperature changes and electromagnetic interference, are indicated. The aim is to develop recommendations for research of AGTE parts in a test bench in a gradient of varying temp

APA, Harvard, Vancouver, ISO, and other styles

36

Popa, Alexandru, Mihaela Hnatiuc, Mirel Paun, et al. "An Intelligent IoT-Based Food Quality Monitoring Approach Using Low-Cost Sensors." Symmetry 11, no. 3 (2019): 374. http://dx.doi.org/10.3390/sym11030374.

Full text

Abstract:

The evolution of multipurpose sensors over the last decades has been investigated with the aim of developing innovative devices with applications in several fields of technology, including in the food industry. The integration of such sensors in food packaging technology has paved the way for intelligent food packaging. These integrated systems are capable of providing reliable information about the quality of the packed products during their storage period. To accomplish this goal, intelligent packs use a variety of sensors suited for monitoring the quality and safety of food products by reco

APA, Harvard, Vancouver, ISO, and other styles

37

Krogstad, Hilde, Cinzia Brunelli, Kari Sand, et al. "Development of EirV3: A Computer-Based Tool for Patient-Reported Outcome Measures in Cancer." JCO Clinical Cancer Informatics, no. 1 (November 2017): 1–14. http://dx.doi.org/10.1200/cci.17.00051.

Full text

Abstract:

Purpose Immediate transfer of patient-reported outcome measures (PROMs) for use in medical consultations is facilitated by electronic assessments. We aimed to describe the rationale and development of Eir version 3 (EirV3), a computer-based symptom assessment tool for cancer, with emphasis on content and user-friendliness. Methods EirV3’s specifications and content were developed through multiprofessional, stepwise, and iterative processes (from 2013 to 2016), with literature reviews on traditional and electronic assessment and classification methods, formative iterative usability tests with e

APA, Harvard, Vancouver, ISO, and other styles

38

"Secure Routing with Improved Medium Access Control (SRI-MAC) Protocol for Wireless Sensor Network using Particle Swarm Optimization." International Journal of Engineering and Advanced Technology 8, no. 5S3 (2019): 145–50. http://dx.doi.org/10.35940/ijeat.e1035.0785s319.

Full text

Abstract:

A set of wireless sensor nodes comprises to form a sensor field called Wireless Sensor Networks (WSN).The main purpose of using the sensor node is to collect information from the ambience process it and send to a common gateway interface called Base Station(BS). The major problems that we face while using WSN are limited battery power, bandwidth, security issues and transmission delay etc. Many algorithms and protocols were developed in order to solve the above issues. Therefore, better solutions are required to face the improvements and challenges in the current technologies. In WSN, the sens

APA, Harvard, Vancouver, ISO, and other styles

39

"Sensor Based Emergency Communication System." International Journal of Engineering and Advanced Technology 9, no. 1 (2019): 4083–87. http://dx.doi.org/10.35940/ijeat.a1325.109119.

Full text

Abstract:

Wireless Monitoring meant for house safety is among the obverse inquires about in the field of International Intelligent Building. To actualize continuous observation of the house safety, the shrewd distant checking structure was formed for house safety dependent on ZigBee improvement and GPRS network. Savvy house has progressed from exclusively implying the united and semi-automated control of common systems while IoT is the improvement of internet services. Uses of IoT are extending. Businesses of new developments in IoT condition are extending rapidly. It has been starting at now made in In

APA, Harvard, Vancouver, ISO, and other styles

40

Mourtzis, Dimitris, Aikaterini Vlachou, and Vasilios Zogopoulos. "Cloud-Based Augmented Reality Remote Maintenance Through Shop-Floor Monitoring: A Product-Service System Approach." Journal of Manufacturing Science and Engineering 139, no. 6 (2017). http://dx.doi.org/10.1115/1.4035721.

Full text

Abstract:

Maintenance and its cost continue, over the years, drawing the attention of production management, since the unplanned failures decrease the reliability of the system and the return of investments. Maintenance services of manufactured products are among the most common services in the industry; they account for more than half of the total costs and influence the environmental impact of the product. In order for manufacturers to increase their productivity, by performing accurate and quick maintenance, advanced monitoring systems should be considered in order to easily detect machine tool failu

APA, Harvard, Vancouver, ISO, and other styles

41

"IOT Based Health Monitoring System using Blynk App." International Journal of Engineering and Advanced Technology 8, no. 6 (2019): 78–81. http://dx.doi.org/10.35940/ijeat.e7467.088619.

Full text

Abstract:

The common healthcare benefits with crafty decisions, execute brilliant communications technologies that can produce resourceful communities. Health plays a major role in our daily routine. Real-time health monitoring for initial detection of life alarming diseases through advanced sensing and communication technology usually contribute advance treatment to save the lives of patients. The main aim of this project is to develop a system which will give body temp, heart rate using DS18b20 and pulse sensor as well. Plus the Controller ESP32 Dev board is interfaced with the sensors. Wireless data

APA, Harvard, Vancouver, ISO, and other styles

42

Prajapati, Abhaykumar, Prof Sohil Luhar, Prof Ramesh Prajapati, and Prof Kaushik Prajapati. "Bluetooth Controlled Notice Board Using Arduino." International Journal of Advanced Research in Science, Communication and Technology, September 2, 2021, 1–3. http://dx.doi.org/10.48175/ijarsct-1893.

Full text

Abstract:

The project is an electronic notice board that is controlled by an android device and displays message on it. Traditionally, there were notice boards where any information or notice had to be stick daily. This becomes tedious and requires daily maintenance. The project overcomes this problem by introducing an electronic display notice board interfaced to an android device through Bluetooth connectivity. The Bluetooth receives the message from the android device that is sent to an Arduino. Notice board is a primary thing in any institution/organization or public utility places like bus stations

APA, Harvard, Vancouver, ISO, and other styles

43

Khalid M. Kahloot, Akram A. ElKhatib, Ahmed A. Salim. "Modifying Tiny Service Discovery Protocol (MTinySDP) to overcome mobility issues." Arab Journal of Sciences & Research Publishing 2, no. 3 (2016). http://dx.doi.org/10.26389/ajsrp.k29116.

Full text

Abstract:

Emerging wireless communication standards and more capable sensors and actuators are pushing the development towards wireless sensor networks (WSNs). Deploying a large number of sensor nodes requires a high level framework enabling the devices to present themselves and the resources they hold. The device and the resources can be described as services. With a service discovery protocol, resources, e.g. samples of data produced by the sensor, could be provided to the application developers through high level interfaces. Service discovery protocols enable software, i.e. services and service users

APA, Harvard, Vancouver, ISO, and other styles

44

"Hand Gesture Based Multi-Purpose Bot." International Journal of Innovative Technology and Exploring Engineering 9, no. 1 (2019): 4419–23. http://dx.doi.org/10.35940/ijitee.a5098.119119.

Full text

Abstract:

Standard interfaces like joysticks and keyboards act as a hindrance in providing precision-oriented results due to its unnaturalness. Recent developments have been made to overcome such imprecise interaction by developing gesture control based on accelerometer. Combining this gesture recognition concept with Bluetooth and the internet we aim to control the robot wirelessly to be able to ease human effort. Using this technology, we can surmount the difficulty faced in gathering data from a hazardous and lethal areas that might pose threat to human life. An accelerometer which measures the accel

APA, Harvard, Vancouver, ISO, and other styles

45

Gerhard, David. "Three Degrees of “G”s: How an Airbag Deployment Sensor Transformed Video Games, Exercise, and Dance." M/C Journal 16, no. 6 (2013). http://dx.doi.org/10.5204/mcj.742.

Full text

Abstract:

Introduction The accelerometer seems, at first, both advanced and dated, both too complex and not complex enough. It sits in our video game controllers and our smartphones allowing us to move beyond mere button presses into immersive experiences where the motion of the hand is directly translated into the motion on the screen, where our flesh is transformed into the flesh of a superhero. Or at least that was the promise in 2005. Since then, motion control has moved from a promised revitalization of the video game industry to a not-quite-good-enough gimmick that all games use but none use well.

APA, Harvard, Vancouver, ISO, and other styles

46

Moore, Christopher Luke. "Digital Games Distribution: The Presence of the Past and the Future of Obsolescence." M/C Journal 12, no. 3 (2009). http://dx.doi.org/10.5204/mcj.166.

Full text

Abstract:

A common criticism of the rhythm video games genre — including series like Guitar Hero and Rock Band, is that playing musical simulation games is a waste of time when you could be playing an actual guitar and learning a real skill. A more serious criticism of games cultures draws attention to the degree of e-waste they produce. E-waste or electronic waste includes mobiles phones, computers, televisions and other electronic devices, containing toxic chemicals and metals whose landfill, recycling and salvaging all produce distinct environmental and social problems. The e-waste produced by games

APA, Harvard, Vancouver, ISO, and other styles

47

Nansen, Bjorn. "Accidental, Assisted, Automated: An Emerging Repertoire of Infant Mobile Media Techniques." M/C Journal 18, no. 5 (2015). http://dx.doi.org/10.5204/mcj.1026.

Full text

Abstract:

Introduction It is now commonplace for babies to begin their lives inhabiting media environments characterised by the presence, distribution, and mobility of digital devices and screens. Such arrangements can be traced, in part, to the birth of a new regime of mobile and touchscreen media beginning with the release of the iPhone in 2007 and the iPad in 2010, which stimulated a surge in household media consumption, underpinned by broadband and wireless Internet infrastructures. Research into these conditions of ambient mediation at the beginnings of life, however, is currently dominated by medi

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!