Relevant bibliographies by topics / Comparison of measurement methods

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Comparison of measurement methods'

Author: Grafiati
Published: 4 June 2021
Last updated: 16 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Comparison of measurement methods.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Comparison of measurement methods"

1

Kuttatharmmakul, Siriporn, D. Luc Massart, and Johanna Smeyers-Verbeke. "Comparison of alternative measurement methods." Analytica Chimica Acta 391, no. 2 (May 1999): 203–25. http://dx.doi.org/10.1016/s0003-2670(99)00115-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rohošková, M., and M. Valla. "Comparison of two methods for aggregate stability measurement – a review." Plant, Soil and Environment 50, No. 8 (December 10, 2011): 379–82. http://dx.doi.org/10.17221/4047-pse.

Full text
Abstract:
Soil structure is a very important soil property, which influences many processes in the soil. There are many methods for aggregate stability measurement varying in the energy applied in the treatment. The aim of this paper is to compare two aggregate stability measurement methods on a set of reclaimed dumpsite soils. Method proposed by Le Bissonnias (1996) is composed of three tests, which allow distinguishing the particular aggregate breakdown mechanisms. Results can be expressed by a coefficient of vulnerability (Kv). Results of the second method, assessment of water stable aggregates, can be expressed by WSA index. WSA indexes mainly correspond to the results of the first test, which qualify the aggregate breakdown during the fast wetting. A strong statistically significant relationship was found between WSA and Kv for each test. Correlation coefficients were –0.767, –0.806, and –0.741 for linear models. Our conclusion is that results of both methods are comparable.
APA, Harvard, Vancouver, ISO, and other styles
3

Shennan, Andrew H., Julie Rushbrook, and Aidan Halligan. "Comparison of blood pressure measurement methods." Lancet 349, no. 9052 (March 1997): 648. http://dx.doi.org/10.1016/s0140-6736(97)26009-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lai, Tsung-Po, Woodring E. Wright, and Jerry W. Shay. "Comparison of telomere length measurement methods." Philosophical Transactions of the Royal Society B: Biological Sciences 373, no. 1741 (January 15, 2018): 20160451. http://dx.doi.org/10.1098/rstb.2016.0451.

Full text
Abstract:
The strengths and limitations of the major methods developed to measure telomere lengths (TLs) in cells and tissues are presented in this review. These include Q-PCR ( Q uantitative P olymerase C hain R eaction), TRF ( T erminal R estriction F ragment) analysis, a variety of Q-FISH ( Q uantitative F luorescence I n S itu H ybridization) methods, STELA ( S ingle TE lomere L ength A nalysis) and TeSLA ( Te lomere S hortest L ength A ssay). For each method, we will cover information about validation studies, including reproducibility in independent laboratories, accuracy, reliability and sensitivity for measuring not only the average but also the shortest telomeres. There is substantial evidence that it is the shortest telomeres that trigger DNA damage responses leading to replicative senescence in mammals. However, the most commonly used TL measurement methods generally provide information on average or relative TL, but it is the shortest telomeres that leads to telomere dysfunction (identified by TIF, T elomere dysfunction I nduced F oci) and limit cell proliferation in the absence of a telomere maintenance mechanism, such as telomerase. As the length of the shortest telomeres is a key biomarker determining cell fate and the onset of senescence, a new technique (TeSLA) that provides quantitative information about all the shortest telomeres will be highlighted. This article is part of the theme issue ‘Understanding diversity in telomere dynamics’.
APA, Harvard, Vancouver, ISO, and other styles
5

van Ittersum, Frans J., Ab JM Donker, and Coen DA Stehouwer. "Comparison of blood pressure measurement methods." Lancet 349, no. 9052 (March 1997): 648–49. http://dx.doi.org/10.1016/s0140-6736(05)61592-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fisco, Nicholas, and Halil Sezen. "COMPARISON OF SURFACE MACROTEXTURE MEASUREMENT METHODS." Journal of Civil Engineering and Management 19, Supplement_1 (January 9, 2014): S153—S160. http://dx.doi.org/10.3846/13923730.2013.802732.

Full text
Abstract:
Recent advances in technology allowed for the use of laser-based systems that can directly measure macrotexture properties of various surfaces. Volumetric or sand patch method has historically been used as the main technique for measuring macrotexture. Different available methods do not all measure the same surface properties and often generate different measurements. Thus, it is crucial to determine the most suitable method for measuring surface macrotexture. This paper investigates mean profile depth measurements from three laser based macrotexture measuring devices, including a laser profiler, a laser texture scanner and a circular texture meter. The results are compared with mean texture depth obtained from volumetric sand patch tests. Experiments were conducted to measure macrotexture of 26 laboratory specimens, which included asphalt and Portland cement concrete samples of various type and finish, as well as other common manufactured textured samples. Based on the evaluation of experimental data collected in this study, relationships are recommended to predict standard macrotexture using the mean profile depth data measured by a laser equipment or scanner.
APA, Harvard, Vancouver, ISO, and other styles
7

ARSLAN, Abdulkadir, and Umut Sami YAMAK. "Comparison of different eggshell thickness measurement methods." TURKISH JOURNAL OF VETERINARY AND ANIMAL SCIENCES 44, no. 5 (October 27, 2020): 1150–53. http://dx.doi.org/10.3906/vet-2004-127.

Full text
Abstract:
This study was conducted to examine how various methods affect the results of eggshell thickness measurements.Direct and indirect measurements were performed on 700 table eggs which were daily collected from the same flock. The shell thickness of the eggs was calculated according to a logarithm which uses egg weight. Eggs with a specific gravity of higher than 0.80 g/cm³ were classified as thick-shelled, whereas the others were categorized as thin-shelled. After determining the shell thickness of the eggs by an ultrasound gauge, all of the eggs were broken, the shells were separated, and the shell thickness of each egg was measured with two micrometers (digital and manual). Values measured by the manual micrometer were considered as actual thicknesses. Lowest correlation was determined between the logarithm method and the others (P > 0.05). However, there was a significant correlation between ultrasound and micrometer measurements (P < 0.05). According to the results of the current study, ultrasound measurement may be accepted as a suitable method for determining the eggshell thickness without breaking the egg.
APA, Harvard, Vancouver, ISO, and other styles
8

METTÄNEN, MARJA, and ULRICH HIRN. "A comparison of five optical surface topography measurement methods." January 2015 14, no. 1 (February 1, 2015): 27–38. http://dx.doi.org/10.32964/10.32964/tj14.1.27.

Full text
Abstract:
The results of optical surface topography measurement techniques have been questioned in the past because of possible measurement artifacts due to light penetration into the paper. We compared the topography measurement results from five optical techniques: laser profilometry, shape-from-focus, stripe projection, chromatic sensing, and photometric stereo. These techniques were tested on coated and uncoated papers with a PPS roughness range from 0.7 μm to 7.7 μm. We made the measurement results directly comparable by measuring exactly the same regions on the paper samples and registering the resulting topography maps. We then calculated the point-wise Pearson correlation between the maps at different wavelength bands to obtain quantitative values for the similarity of the measurement results at different structure sizes. The correspondences between the measured topography maps were also examined through multivariate linear regression and roughness indices evaluated at two different structure sizes. For rougher grades like office paper or sack paper, the topography measurements from the five measurement techniques showed corresponding results. For a moderately smooth lightweight coated (LWC) paper, the measured topographies agreed to some degree, and for smooth supercalendered (SC) and woodfree coated (WFC) papers, the agreement was poor. From the available data, it is impossible to tell which of the measurement techniques delivers the true surface topography of smooth papers.
APA, Harvard, Vancouver, ISO, and other styles
9

Fallico, C., E. Migliari, and S. Troisi. "Comparison of three measurement methods of saturated hydraulic condutivity." Hydrology and Earth System Sciences Discussions 3, no. 3 (June 14, 2006): 987–1019. http://dx.doi.org/10.5194/hessd-3-987-2006.

Full text
Abstract:
Abstract. After pointing out the importance of the saturated hydraulic conductivity (ks) measurements and the difficulties and uncertainties that are present, and after recalling salient aspects of three well-known measurement methods of this parameter (i.e. constant-head tension infiltrometer (TI) method, constant-head pressure infiltrometer (PI) method and soil core (SC) estimates method), the results of an investigation on data which were obtained during a measurement campaign on an area of 800 m2, on a sandy loam hillslope, located in Southern Italy, were carried out again here. Three sets of values of ks, obtained with these measurement methods, were analyzed statistically, verifying that the log-normal distribution describes these better than the normal one; moreover, the more significant statistical parameters of each set were compared (average value , amplitude A, coefficient of variation CV and standard deviation SD), individualizing the more significant differences. The greatest value of hydraulic conductivity was found with method (PI), while the smallest with (SC) and the intermediate with (TI); these differences were translated into macroporosity and into the influence of the single measurement method. Moreover, referring to the possible factors affecting the results, the importance can be noted of the structure, the texture and the soil events, in terms of utilization, which can affect the measure of ks leading often to very different values even for similar soils, but with a different history, independently of the coincidence of the measurement points and they can be determining to explain the differences affecting the results obtained in analogous investigations by other researchers. Having confirmed that generalization is not possible, the need was emphasized to adopt the necessary devices relating to the specific measurement method, case by case, and to carefully explain the obtained results, in the light of the peculiarities and the limits of each situation. Finally, the results of similar statistical analysis carried out on a greater number of ks values, measured through the (TI) and (PI) methods are shown in this paper, with some statistical considerations on the increasing of the measurements number.
APA, Harvard, Vancouver, ISO, and other styles
10

Odziemczyk, Waldemar, and Marek Woźniak. "Analysis of railway track geometry measurement methods usability." Transportation Overview - Przeglad Komunikacyjny 2018, no. 8 (August 1, 2018): 40–50. http://dx.doi.org/10.35117/a_eng_18_08_05.

Full text
Abstract:
Precise information of railway tracks geometry is necessary to design alignment project. Geodetic measurements are the most common method of determining this information and sags of arch direct measurement are the traditional and still popular measurement method. Development of geodetic measurements techniques made possible to use another methods such as tacheometry, GNSS, and new methods based on mobile measurement devices. Series of experiments were conducted to set the practical usability of selected modern measurement methods to design track alignment project. The experimental measurements were performed on the 3 km long two-track railway fragment. Following methods were used during the test measurements: sags of arch direct measurement, tacheometry with total station, GNSS, automated methods with the use of a trolley system. Above mentioned measurement methods were compared taking into account time and labour consumption, range of geometric data, measurement equipment cost, reliability and accuracy of surveying procedure. Because of different data types are delivered with various methods, sags of arch were used for comparison of accuracy. Comparison of geometrical data obtained with analysed methods allowed to formulate conclusions concerning practical usability those methods for track alignment project development.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Comparison of measurement methods"

1

Fisco, Nicholas Robert. "Comparison of Macrotexture Measurement Methods." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1243950873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Erlandsson, Olof. "Comparison of Tunnel Convergence Measurement Methods." Thesis, KTH, Fastigheter och byggande, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-276439.

Full text
Abstract:
When creating cavities below ground, movements occur in the surrounding soil due to disrupted equilibrium. In tunnel constructions these displacements are referred to as tunnel convergence. This report compares four dierent methods for monitoring tunnel convergence with regards to both measurement precision and method cost. Three of the methods are based on displacement measurements of optical targets placed at regular intervals in the tunnel. Presented is also a method using a combination of wireless tilt and distance sensors to monitor tunnel convergence. The overall conclusion is that measurement precision and cost are well correlated. However, important to consider is that tunnel convergence monitoring cost is faceted and not only the obvious cost of equipment and labour, but also the indirect cost from interfering with other activities in the tunnel. Measurement precision of the dierent methods was determined by applying the methods in a lab environment, congured to eliminate any possible movements, and analysing the distribution of the displacement demonstrated by each method. In addition, information regarding the labour eort required to prepare and perform the measurements was also collected. Based on the experiments and literature studies, the report discusses the criteria to consider when selecting a tunnel convergence monitoring method and presents a comparison of the four methods included in the study.
Vid skapandet av underjordiska hålrum uppträder rörelser i den omgivande marken på grund av att jämvikten upphävs. I tunnelkonstruktioner kallas dessa förskjutningar för tunnelkonvergens. Denna rapport jämför, med avseende både på precision och kostnad, fyra metoder för mätning av tunnelkonvergens. Tre av metoderna baseras på förskjutningsmätningar av optiska mål placerade på regelbundna avstånd längs tunneln. Rapporten presenterar även en metod där en kombination av trådlösa tilt- och distanssensorer används för att monitorera tunnelkonvergens. Den övergripande slutsatsen är att mätprecision och kostnad är väl korrelerade. Viktigt är dock att beakta de olika delarna i den totala kostnaden, som inte bara består av kostnader för arbetskraft och utrustning utan även indirekta kostnader på grund av att annan verksamhet hindras under mätaktiviteter. Mätprecisionen för de olika metoderna uppskattades genom att analysera fördelningen av mätvärden uppmätta i en lab-miljö beskaffad så att inga rörelser förväntades. Från labmätningarna noterades även omfattningen av den arbetsinsats som krävs för att förbereda och utföra mätningarna. Med mätningarna och litteraturstudier som bakgrund diskuteras kriterier att beakta när man väler metod för konvergensmätning. Baserat på dessa kriterier jämförs de fyra metoderna.
APA, Harvard, Vancouver, ISO, and other styles
3

Yenter, Jaclyn. "Energy expenditure during chewing: a comparison of two measurement methods." Thesis, Wichita State University, 2011. http://hdl.handle.net/10057/3994.

Full text
Abstract:
Older adults with chewing and swallowing difficulties frequently report increased fatigue and effort, or energy expenditure, during eating. Energy is defined as the ability to perform work. It is most accurately measured through an examination of the gaseous composition of inhaled and exhaled air at rest and during activity using laboratory-based indirect calorimetry. There is a need for a valid measure of energy expenditure that can be used to document the effort involved in eating and swallowing in natural contexts. The purpose of the current study was to determine the concurrent validity of the portable SenseWear® system compared to indirect calorimetry during a simulated eating task. Nineteen university students served as participants. Each was connected simultaneously to indirect calorimetry and SenseWear® systems. Energy expenditure was obtained while participants chewed gum and swallowed repeatedly. Pearson product-moment correlations showed a close relationship (p < 0.05) between the two measurement methods. Mean Mid-Arm Muscle Circumference measures also correlated positively with both measurement methods, reflecting the influence of body mass on energy expenditure. Results support the use of the SenseWear® system to measure energy expenditure in chewing and swallowing in natural contexts, particularly for adults with chewing and swallowing difficulties.
Thesis (M.A.)--Wichita State University, College of Health Professions, Dept. of Communication Sciences and Disorders.
APA, Harvard, Vancouver, ISO, and other styles
4

Spielholz, Peregrin. "A comparison of upper extremity physical risk factor measurement methods /." Thesis, Connect to this title online; UW restricted, 1999. http://hdl.handle.net/1773/8468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sprague, Susan, and Andrew Chorney. "A COMPARISON OF METHODS FOR MEASUREMENT OF PRESSURE IN HYDRAULIC LINES." International Foundation for Telemetering, 2000. http://hdl.handle.net/10150/606795.

Full text
Abstract:
International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California
This presentation summarizes a study characterizing strain gages and pressure transducers used to measure the fluid pressure within aircraft hydraulic lines. A series of laboratory calibrations and finite element analyses was performed to demonstrate the quality of data from both pressure transducers and strain gages under variations in both temperature and external strains on the hydraulic lines. Strain gages showed a marked susceptibility to external strains on hydraulic lines, and wide variations in susceptibility to temperature changes. Pressure transducers were found to be relatively immune to both conditions. It is recommended that strain gages be used for trend data only.
APA, Harvard, Vancouver, ISO, and other styles
6

Jones, Nicole L. "Comparison of physical activity assessment methods among Phase III cardiac rehabilitation participants." Virtual Press, 2006. http://liblink.bsu.edu/uhtbin/catkey/1339152.

Full text
Abstract:
Physical inactivity is a significant health concern for individuals in the United States, and is especially an issue for those with a history of coronary artery disease. Increased physical activity is encouraged for those who are participants in Phase III cardiac rehabilitation to promote a healthy lifestyle after a cardiac event. The purpose of the study was to assess and characterize the physical activity levels of Phase III cardiac patients. Other objectives of this study were to compare various forms of physical activity assessment and compare the activity levels of the cardiac rehabilitation participants with other populations. Comparisons of three physical activity devices were analyzed as well as activity levels on rehab and non-rehab days. Those who participated in home exercise vs. those who did not do home exercise were compared as well as those who were retired vs. those who were employed. Subject inclusion criteria included Phase III cardiac patients who were 40-69 years of age and who attended rehab a minimum of two days per week. The subjects were required to wear a pedometer and accelerometer for at least 12 days and complete a questionnaire following the trial. The mean ± S. D. for age, height, weight and BMI of the subjects was 59.4±8.2 years, 69.1±3.1 inches, 200.9±41.8 lbs., and 29.4±4.8 kg/m2 respectively. The Lifecorder, ActiGraph and International Physical Activity Questionnaire (IPAQ) were used to measure physical activity levels of the Phase III cardiac patients. The IPAQ did not correlate well with the Lifecorder or ActiGraph in assessing physical activity in Phase III cardiac patients (R=0.251, P=0.226-ActiGraph and R=0.280, P=0.175-Lifecorder), however, the Lifecorder and the ActiGraph had a significant correlation coefficient with one another (R=0.83, P<0.001). Rehab vs. non-rehab day data as well as rehab session and non-rehab session physical activity levels were compared among the subjects. On a rehab day, subjects took 9,770±3132 steps/day, which was significantly higher than what they took on a non-rehab day, 5,404±2843 steps/day. Those who did not exercise at home accumulated on average 8,194±2912 steps/day on a rehab day, while on a non-rehab day they accumulated 3,475±1579 steps/day (P<0.001). Those who did exercise at home, took 10,883±2856 steps/day on a rehab day, while on a non rehab day they took 6,767±2768 steps/day (P<0.001). Those who were employed were more active than those who were retired. In conclusion, Phase III cardiac rehabilitation is an effective way to increase physical activity levels of those with a history of coronary artery disease. All participants in Phase III cardiac rehabilitation should be encouraged to come into the center-based facility at least 4-5 days per week or implement a home exercise program into their weekly regimen.
School of Physical Education, Sport, and Exercise Science
APA, Harvard, Vancouver, ISO, and other styles
7

Feng, Xiaofan. "Comparison of methods for generation of absolute reflectance factor measurement for BRDF studies /." Online version of thesis, 1990. http://hdl.handle.net/1850/10922.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Manivasagam, Karnica. "COMPARISON OF WRIST VELOCITY MEASUREMENT METHODS: IMU, GONIOMETER AND OPTICAL MOTION CAPTURE SYSTEM." Thesis, KTH, Medicinteknik och hälsosystem, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-287178.

Full text
Abstract:
Repetitive tasks, awkward hand/wrist postures and forceful exertions are known risk factors for work-related musculoskeletal disorders (WMSDs) of the hand and wrist. WMSD is a major cause of long work absence, productivity loss, loss in wages and individual suffering. Currently available assessment methods of the hand/wrist motion have the limitations of being inaccurate, e.g. when using self-reports or observations, or expensive and resource-demanding for following analyses, e.g. when using the electrogoniometers. Therefore, there is a need for a risk assessment method that is easy-to-use and can be applied by both researchers and practitioners for measuring wrist angular velocity during an 8-hour working day. Wearable Inertial Measurement Units (IMU) in combination with mobile phone applications provide the possibility for such a method. In order to apply the IMU in the field for assessing the wrist velocity of different work tasks, the accuracy of the method need to be examined. Therefore, this laboratory experiment was conducted to compare a new IMU-based method with the traditional goniometer and standard optical motion capture system. The laboratory experiment was performed on twelve participants. Three standard hand movements, including hand/wrist motion of Flexion-extension (FE), Deviation, and Pronationsupination (PS) at 30, 60, 90 beat-per-minute (bpm), and three simulated work tasks were performed. The angular velocity of the three methods at 50th and 90th percentile were calculated and compared. The mean absolute error and correlation coefficient were analysed for comparing the methods. Increase in error was observed with increase in speed/bpm during the standard hand movements. For standard hand movements, comparison between IMUbyaxis and Goniometer had the smallest difference and highest correlation coefficient. For simulated work tasks, the difference between goniometer and optical system was the smallest. However, for simulated work tasks, the differences between the compared methods were in general much larger than the standard hand movements. The IMU-based method is seen to have potential when compared with the traditional measurement methods. Still, it needs further improvement to be used for risk assessment in the field.
Upprepade uppgifter, besvärliga hand- / handledsställningar och kraftfulla ansträngningar är kända riskfaktorer för arbetsrelaterade muskuloskeletala störningar (WMSD) i hand och handled. WMSD är en viktig orsak till lång frånvaro, produktivitetsförlust, löneförlust och individuellt lidande. För närvarande tillgängliga bedömningsmetoder för hand / handledsrörelser har begränsningarna att vara felaktiga, t.ex. när du använder självrapporter eller observationer, eller dyra och resurskrävande för följande analyser, t.ex. när du använder elektrogoniometrarna. Därför finns det ett behov av en riskbedömningsmetod som är enkel att använda och som kan användas av både forskare och utövare för att mäta handledens vinkelhastighet under en 8-timmars arbetsdag. Wearable Inertial Measuring Units (IMU) i kombination med mobiltelefonapplikationer ger möjlighet till en sådan metod. För att kunna använda IMU i fältet för att bedöma handledens hastighet för olika arbetsuppgifter måste metodens noggrannhet undersökas. Därför genomfördes detta laboratorieexperiment för att jämföra en ny IMU-baserad metod med den traditionella goniometern och det vanliga optiska rörelsefångningssystemet. Laboratorieexperimentet utfördes på tolv deltagare. Tre standardhandrörelser, inklusive hand / handledsrörelse av Flexion-extension (FE), Deviation och Pronation-supination (PS) vid 30, 60, 90 beat-per-minut (bpm) och tre simulerade arbetsuppgifter utfördes. Vinkelhastigheten för de tre metoderna vid 50: e och 90: e percentilen beräknades och jämfördes. Det genomsnittliga absoluta felet och korrelationskoefficienten analyserades för att jämföra metoderna. Ökning av fel observerades med ökning av hastighet/bpm under standardhandrörelserna. För standardhandrörelser hade jämförelsen mellan IMUbyaxis och Goniometer den minsta skillnaden och högsta korrelationskoefficienten. För simulerade arbetsuppgifter var skillnaden mellan goniometer och optiskt system den minsta. För simulerade arbetsuppgifter var dock skillnaderna mellan de jämförda metoderna i allmänhet mycket större än de vanliga handrörelserna. Den IMUbaserade metoden anses ha potential jämfört med traditionella mätmetoder. Ändå behöver det förbättras för att kunna användas för riskbedömning på fältet.
APA, Harvard, Vancouver, ISO, and other styles
9

Becci, Andrea. "Comparison between fault location methods in distribution grid using PMU measurements." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/22602/.

Full text
Abstract:
The introduction of Phasor Measurement Unit (PMU) in distribution network has an important innovation that brings the possibility of having in real time the complete knowledge of the full network with higher accuracy. In the following chapters is analized the possibility to derive the position of a fault along a line using measurements performed by a limited number of PMU connected to strategic nodes. Aim of this thesis is to analize and compare different possible use of PMU for fault location and undestrand which are the problematics that have to be solved for real implementation. Firstly is provided an introduction on the main features of the instrument focusing on the definition of the synchrophasor and because it is important to improve the quality of the measurements providing some accuracy indexes used to define such parameter. Then, different methods for fault location in distribution network are described concentrating the discussion on the algorithm provided for the calculation and finally, is introduced a method for stategic PMU positioning inside the network and then a comparison between the methods is performed emphasizing the advantages and disadvantages brings from each method, focusing on the limitations that can occur due to not easily accessible input data, exibility of each method to different types of fault and extension of the theorical model to a real network with different components and higher vastity.
APA, Harvard, Vancouver, ISO, and other styles
10

Whalen, John David. "Comparison of evaporation duct height measurement methods and their impact on radar propagation estimates." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1998. http://handle.dtic.mil/100.2/ADA345694.

Full text
Abstract:
Thesis (M.S. in Meteorology and Physical Oceanography) Naval Postgraduate School, March 1998.
"March 1998." Thesis advisor(s): Kenneth L. Davidson. Includes bibliographical references (p. 63-64). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Comparison of measurement methods"

1

Microwave measurement by comparison methods. Amsterdam: Elsevier, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bolfarine, Heleno, Mário de Castro, and Manuel Galea. Regression Models for the Comparison of Measurement Methods. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-57935-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kneppo, Ivan. Microwave measurements by comparison methods. Amsterdam: Elsevier, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Knoepp, Jennifer D. Quantitative comparison of in situ soil CO₂ flux measurement methods. Asheville, NC: U.S. Dept. of Agriculture, Forest Service, Southern Research Station, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Marutzky, Sammy J. Comparison of in-situ and laboratory measurement methods for radium-226 in soils. Grand Junction, Colo: Office of Remedial Action and Waste Technology, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Whalen, John David. Comparison of evaporation duct height measurement methods and their impact on radar propagation estimates. Monterey, Calif: Naval Postgraduate School, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ferguson, R. B. A comparison of height-accumulation and volume-equation methods for estimating tree and stand volumes. [New Orleans, La.]: U.S. Dept. of Agriculture, Forest Service, Southern Forest Experiment Station, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ferguson, R. B. A comparison of height-accumulation and volume-equation methods for estimating tree and stand volumes. [New Orleans, La.]: U.S. Dept. of Agriculture, Forest Service, Southern Forest Experiment Station, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jones, Michael G. A comparison of signal enhancement methods for extracting tonal acoustic signals. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Developing cross-cultural measurement. New York: Oxford University Press, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Comparison of measurement methods"

1

Bolfarine, Heleno, Mário de Castro, and Manuel Galea. "Two Methods." In Regression Models for the Comparison of Measurement Methods, 5–15. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-57935-7_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bolfarine, Heleno, Mário de Castro, and Manuel Galea. "Two or More Methods." In Regression Models for the Comparison of Measurement Methods, 17–25. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-57935-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Amadei, Bernard, and Ove Stephansson. "Case Studies and Comparison between Different Methods." In Rock Stress and Its Measurement, 327–60. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5346-1_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hoevenagel, Ruud. "A Comparison of Economic Valuation Methods." In Valuing the Environment: Methodological and Measurement Issues, 251–70. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-015-8317-6_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sączewska-Piotrowska, Anna. "Comparison of Methods of Poverty Rates Measurement." In Advances in Longitudinal Data Methods in Applied Economic Research, 249–65. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63970-9_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liang, W., J. Huang, and J. Zhang. "Comparison of Displacement Reconstruction Methods by Acceleration Measurement." In Lecture Notes in Electrical Engineering, 749–55. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9441-7_77.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bolfarine, Heleno, Mário de Castro, and Manuel Galea. "Data Analysis." In Regression Models for the Comparison of Measurement Methods, 37–48. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-57935-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bolfarine, Heleno, Mário de Castro, and Manuel Galea. "Model Checking and Influence Assessment." In Regression Models for the Comparison of Measurement Methods, 27–35. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-57935-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bolfarine, Heleno, Mário de Castro, and Manuel Galea. "Introduction." In Regression Models for the Comparison of Measurement Methods, 1–4. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-57935-7_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Frisoli, M., A. Braidot, J. Nicolet, J. Edelhoff, N. Gersdorff, and W. Engelke. "Biostatistics Applied to Comparison of Jaw Movement Measurement Methods." In VI Latin American Congress on Biomedical Engineering CLAIB 2014, Paraná, Argentina 29, 30 & 31 October 2014, 67–70. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-13117-7_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Comparison of measurement methods"

1

Hegedus, H., J. Konjevod, P. Mostarac, and R. Malaric. "Comparison of DMM characterization methods based on RMS noise and standard deviation noise." In 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983548.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bharkhada, Deepak, Harold Rothfuss, and Maurizio Conti. "Comparison of Time Resolution Measurement Methods." In 2017 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 2017. http://dx.doi.org/10.1109/nssmic.2017.8532866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Krauter, Stefan, and Alexander Preiss. "Comparison of module temperature measurement methods." In 2009 34th IEEE Photovoltaic Specialists Conference (PVSC). IEEE, 2009. http://dx.doi.org/10.1109/pvsc.2009.5411669.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jones, J. Adam, and Thai Phan. "A Comparison of Gait Measurement Methods." In SoutheastCon 2019. IEEE, 2019. http://dx.doi.org/10.1109/southeastcon42311.2019.9020364.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vukanac, Ivana, Igor Čeliković, Gordana Pantelić, Miloš Živanović, and Jelena Krneta Nikolić. "Comparison of indoor radon measurement methods." In RAD Conference. RAD Centre, 2021. http://dx.doi.org/10.21175/rad.abstr.book.2021.37.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fialka, Jiri, and Petr Benes. "Comparison of methods of piezoelectric coefficient measurement." In 2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2012. http://dx.doi.org/10.1109/i2mtc.2012.6229293.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Haraki, Takeshi, Kazuyoshi Ishida, Yoshihito Matsumura, Masakazu Fujita, Toshiro Kuji, and Hirohisa Uchida. "Comparison of different measurement methods of magnetostriction." In SPIE's International Symposium on Smart Materials, Nano-, and Micro- Smart Systems, edited by Erol C. Harvey, Derek Abbott, and Vijay K. Varadan. SPIE, 2002. http://dx.doi.org/10.1117/12.469404.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Botor, Tomáš, and Hashim Habiballa. "Comparison of time measurement methods in C++." In INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS (ICNAAM 2017). Author(s), 2018. http://dx.doi.org/10.1063/1.5043705.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Balestrieri, E., P. Daponte, and S. Rapuano. "ADC Standard Harmonization: Comparison of Test Methods." In 2008 IEEE Instrumentation and Measurement Technology Conference - I2MTC 2008. IEEE, 2008. http://dx.doi.org/10.1109/imtc.2008.4547205.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Laurent Vanbeylen. "Comparison of Filter Design Methods to generate Analytic Signals." In 2006 IEEE Instrumentation and Measurement Technology. IEEE, 2006. http://dx.doi.org/10.1109/imtc.2006.236667.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Comparison of measurement methods"

1

Bedner, Mary, Jacolin A. Murray, Aaron A. Urbas, William A. MacCrehan, and Walter B. Wilson. A Comparison of Measurement Methods for Alcohol-Based Hand Sanitizers. National Institute of Standards and Technology, February 2021. http://dx.doi.org/10.6028/nist.ir.8342.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sprague, Susan, and Andrew Chorney. A Comparison of Methods for Measurement of Pressure in Hydraulic Lines. Fort Belvoir, VA: Defense Technical Information Center, January 2000. http://dx.doi.org/10.21236/ada378010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Knoepp, Jennifer D., and James M. Vose. Quantitative comparison of in situ soil CO2 flux measurement methods. Asheville, NC: U.S. Department of Agriculture, Forest Service, Southern Research Station, 2002. http://dx.doi.org/10.2737/srs-rp-28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Knoepp, Jennifer D., and James M. Vose. Quantitative comparison of in situ soil CO2 flux measurement methods. Asheville, NC: U.S. Department of Agriculture, Forest Service, Southern Research Station, 2002. http://dx.doi.org/10.2737/srs-rp-28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Blau, P. J., R. L. Martin, and L. Riester. A comparison of several surface finish measurement methods as applied to ground ceramic and metal surfaces. Office of Scientific and Technical Information (OSTI), January 1996. http://dx.doi.org/10.2172/196529.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Paulter Jr., Nicholas G. Comparison of the measurement uncertainties and errors for the waveform state levels estimated using the histogram mode and shorth methods. Gaithersburg, MD: National Institute of Standards and Technology, February 2019. http://dx.doi.org/10.6028/nist.tn.2036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tan, M. J., and M. Ishii. Interfacial area measurement methods. Office of Scientific and Technical Information (OSTI), February 1989. http://dx.doi.org/10.2172/6144035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Unseren, M. A., and D. B. Reister. A comparison of three redundancy resolution methods. Office of Scientific and Technical Information (OSTI), October 1997. http://dx.doi.org/10.2172/631238.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bukin, A. A Comparison of Methods for Confidence Intervals. Office of Scientific and Technical Information (OSTI), March 2004. http://dx.doi.org/10.2172/826815.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Molnar, S., J. F. Cassidy, P. A. Monahan, and S. E. Dosso. Comparison of geophysical shear-wave velocity methods. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2007. http://dx.doi.org/10.4095/222259.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Comparison of measurement methods' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography