Relevant bibliographies by topics / Composite Blade

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Composite Blade'

Author: Grafiati
Published: 4 June 2021
Last updated: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Composite Blade.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Composite Blade"

1

Aiello, R. A., and S. Chi. "Advanced Composite Turboprops: Modeling, Structural, and Dynamic Analyses." Journal of Engineering for Gas Turbines and Power 110, no. 2 (1988): 306–11. http://dx.doi.org/10.1115/1.3240122.

Full text
Abstract:
This paper presents a structural and dynamic analysis of a scaled-down wind tunnel model prop-fan blade made from fiber composites. This blade is one of a series of prop-fan blades that have been tested at the Lewis Research Center wind tunnel facilities. The blade is highly swept and twisted and of the spar/shell construction. Due to the complexity of the blade geometry and its high performance, it is subjected to much higher loads and tends to be much less stable than conventional blades. The structural and dynamic analyses of the blade were performed using the NASA-Lewis COBSTRAN computer c
APA, Harvard, Vancouver, ISO, and other styles
2

Carnicero, Rafael, Luis Cano, Miguel A. Lopez-Manchado, and Raquel Verdejo. "Manufacturing, Testing and Recycling of a small recyclable wind turbine blade." Journal of Physics: Conference Series 2265, no. 3 (2022): 032013. http://dx.doi.org/10.1088/1742-6596/2265/3/032013.

Full text
Abstract:
Abstract Thermoplastic resins are likely to replace thermoset resins in wind blade manufacturing, as their similar structural properties together with their recyclability would enable the reuse of the raw materials in other composites at the end of life. This paper presents the manufacturing, testing and recycling process of a 1 m thermoplastic composite wind turbine blade compared to a similar thermoset blade. The results showed that the static and centrifugal performance of the two blades were similar, but the thermoplastic composite blade had a lower deflection compared to the epoxy blade.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Ming Song, Pu Xian Zhu, and Lian Bing Cheng. "Composite Damping Circular Saw Blade Vibration Characteristics Analysis." Applied Mechanics and Materials 670-671 (October 2014): 1106–11. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.1106.

Full text
Abstract:
Applying the method of finite element to research the composite damping vibration reduction effect of circular saw blade. Based on the structure of composite damping circular saw blade, contrast a composite saw blade and ordinary saw blade, to design and compare their vibration characteristics. Through research the vibration characteristics on the three kinds of saw blades found that the each order natural frequency of composite damping saw blade and composite saw blade is smaller than the corresponding order natural frequency of ordinary saw blade, and the each order natural frequency of comp
APA, Harvard, Vancouver, ISO, and other styles
4

Mwanyika, Hegespo H., Yusufu AC Jande, and Thomas Kivevele. "Design and Performance Analysis of Composite Airfoil Wind Turbine Blade." Tanzania Journal of Science 47, no. 5 (2021): 1701–15. http://dx.doi.org/10.4314/tjs.v47i5.18.

Full text
Abstract:
Abstract
 Small horizontal axis wind turbine rotors with composite airfoil rotor blades were designed and investigated in the present study in order to improve its performance in low wind speed and low Reynolds number (Re) conditions for standalone system. The geometrical and aerodynamic nature of a single airfoil small horizontal axis wind turbine blade curtails efficient energy harnessing of the rotor blade. The use of composite airfoil rotor blade improves energy production but imposes uncertainty in determining an optimal design angle of attack and the off design aerodynamic behaviour
APA, Harvard, Vancouver, ISO, and other styles
5

De, Tian, Guang Hua Chen, and Jian Mei Zhang. "Finite Element Analysis of 5MW Fiberglass and Carbon Fiber Wind Turbine Blade." Advanced Materials Research 418-420 (December 2011): 606–9. http://dx.doi.org/10.4028/www.scientific.net/amr.418-420.606.

Full text
Abstract:
Abstract: Base on finite element method of composite, take 5MW horizontal axis wind turbine blades as example, skin uses a mixture of fiberglass and carbon fiber as ply, spar caps and web adopt carbon fiber ply entirely to build the finite element model of the blade. The total weigh of the blade is 20.2 ton. Use Bladed software calculated the limit load of each cross-section, analyzed the stress distribution of each section and the modal characteristics of the blade, these provide a theoretical reference for the application of carbon fiber using on MW class wind turbine blade.
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Kun Nan, and Wei Hsin Gau. "Structural Optimization on Composite Blades of Large-Scale Wind Turbines." Applied Mechanics and Materials 284-287 (January 2013): 958–62. http://dx.doi.org/10.4028/www.scientific.net/amm.284-287.958.

Full text
Abstract:
Turbine blades used in large-scale, horizontal-axis wind turbines are usually made from composite materials to reduce the weight while attaining a reasonable strength to weight ratio. The design of large wind turbine blades must consider both their aerodynamic efficiency and structural robustness. This paper presents an optimum design scheme for composite wind turbine blades. The first optimization phase produces the aerodynamic outer shape of a blade framed by airfoils with optimum cord lengths and twist angles along the blade spanwise direction. The second phase provides optimal material dis
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, Hai Chen. "Layup Analyzing of a Carbon/Glass Hybrid Composite Wind Turbine Blade Using Finite Element Analysis." Applied Mechanics and Materials 87 (August 2011): 49–54. http://dx.doi.org/10.4028/www.scientific.net/amm.87.49.

Full text
Abstract:
This thesis use AOC15/50 blade as baseline model which is a composite wind turbine blade made of glass/epoxy for a horizontal axis wind turbine. A finite element modeling of composite wind turbine blade was created using the SHELL element of ANSYS. Then we study how to use the carbon fiber material replaces the glass fiber to make the hybrid blade, and find a suitable layup to improve the performance of the blade. The hybrid blade was made through introducing carbon fibers. Different models, with introducing different number of carbon fibers, 75% carbon fibers replace unidirectional glass fibe
APA, Harvard, Vancouver, ISO, and other styles
8

Amoozgar, Mohammadreza, Mahdi Bodaghi, and Rafic M. Ajaj. "The Effect of Non-Conservative Compressive Force on the Vibration of Rotating Composite Blades." Vibration 3, no. 4 (2020): 478–90. http://dx.doi.org/10.3390/vibration3040030.

Full text
Abstract:
This paper investigates the effectiveness of a resonance avoidance concept for composite rotor blades featuring extension–twist elastic coupling. The concept uses a tendon, attached to the tip of the blade, to apply a proper amount of compressive force to tune the vibration behavior of the blade actively. The tendon is simulated by applying a non-conservative axial compressive force applied to the blade tip. The main load carrying part of the structure is the composite spar box, which has an antisymmetric layup configuration. The nonlinear dynamic behavior of the composite blade is modelled by
APA, Harvard, Vancouver, ISO, and other styles
9

Jureczko, Mariola, and Maciej Mrówka. "Multiobjective Optimization of Composite Wind Turbine Blade." Materials 15, no. 13 (2022): 4649. http://dx.doi.org/10.3390/ma15134649.

Full text
Abstract:
When designing a wind turbine, the main objective is to generate maximum effective power with the lowest possible production costs. The power of a wind turbine depends primarily on the aerodynamic properties of its blades. Moreover, the cost of making a blade for a wind turbine, and therefore also for the entire wind turbine, depends on the materials used for its production. Therefore, wind turbine blades are the most studied element of a wind turbine. By selecting the optimal material and geometric properties of the wind turbine blade, it is possible to reduce the costs of making the entire w
APA, Harvard, Vancouver, ISO, and other styles
10

Xu, Lin, Wen Lei Sun, and An Wu. "Structural Properties Analysis of Composite Wind Turbine Blade." Key Engineering Materials 522 (August 2012): 602–5. http://dx.doi.org/10.4028/www.scientific.net/kem.522.602.

Full text
Abstract:
In the process of wind turbine operation, the blade needs to withstand various kinds of loads. With wind turbine power kept getting bigger, the strength requirement of the blades become higher. In order to improve the strength of the blade, lots of new composite materials are use in blade material component parts. This paper studies the geometry laminated structure, external and structural characteristics of composite blade.
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Composite Blade"

1

Walsh, Justin M. "Composite material bend-twist coupling for wind turbine blade applications." Laramie, Wyo. : University of Wyoming, 2009. http://proquest.umi.com/pqdweb?did=1965523621&sid=1&Fmt=2&clientId=18949&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chu, Han-Ru. "Vibrations of disordered assemblies of three-dimensional composite blade substructures /." The Ohio State University, 1992. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487779914824864.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lasseigne, Alexis. "Optimization of variable-thickness composite structures. Application to a CROR blade." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEM006/document.

Full text
Abstract:
Cette thèse aborde la problématique de la conception optimale de structures composites stratifiées d’épaisseur variable. Les variables d’empilement définissent un problème d’optimisation combinatoire et des espaces de décisions de grande taille et potentiellement multimodaux. Les algorithmes d’optimisation stochastiques permettent de traiter ce type de problème et de tirer profit des performances et de l’anisotropie des plis composites pour l’allègement des structures composites stratifiées. Le but de cette étude est double : (i) développer un algorithme d’optimisation dédié aux composites str
APA, Harvard, Vancouver, ISO, and other styles
4

Bailey, Brent. "Investigation of a composite hingeless helicopter rotor blade with integral actuators." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0024/MQ52385.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wickramasinghe, Viresh K. (Viresh Kanchana) 1971. "Characterization of active fiber composite actuators for helicopter rotor blade applications." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/82200.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bailey, Brent Carleton University Dissertation Engineering Mechanical and Aerospace. "Investigation of a composite hingeless helicopter rotor blade with integral actuators." Ottawa, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tual, Nicolas. "Durability of carbon/epoxy composites for tidal turbine blade applications." Thesis, Brest, 2015. http://www.theses.fr/2015BRES0057/document.

Full text
Abstract:
Les matériaux composites sont utilisés dans de nombreuses structures marines et de nouvelles applications sont en cours de développement telles que les pales d’hydroliennes. La fiabilité de ces composants dans un environnement très sévère est cruciale pour la rentabilité de ces systèmes récupérateurs d’énergie des courants marins. Ces structures sont sujettes à de nombreuses forces, telles que les courants marins, les vagues, tempêtes mais également diverses agressions marines telles que l’eau de mer et la corrosion. Une compréhension approfondie du comportement au long terme de ces parties mo
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Leihong. "Structural design of composite rotor blades with consideration of manufacturability, durability, and manufacturing uncertainties." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24757.

Full text
Abstract:
Thesis (Ph.D.)--Aerospace Engineering, Georgia Institute of Technology, 2009.<br>Committee Chair: Hodges, Dewey H.; Committee Member: Bauchau, Olivier A.; Committee Member: Johnson, Ellis; Committee Member: Makeev, Andrew; Committee Member: Volovoi, Vitali V.
APA, Harvard, Vancouver, ISO, and other styles
9

Ha, Kwangtae. "A Combined Piezoelectric Composite Actuator and Its Application to Wing/Blade Tips." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/7575.

Full text
Abstract:
A novel combined piezoelectric-composite actuator configuration is proposed and analytically modeled in this work. The actuator is a low complexity, active compliant mechanism obtained by coupling a modified star cross sectional configuration composite beam with a helicoidal bimorph piezoelectric actuator coiled around it. This novel actuator is a good candidate as a hinge tension-torsion bar actuator for a helicopter rotor blade flap or blade tip and mirror rotational positioning. In the wing tip case, the tip deflection angle is different only according to the aerodynamic moment depending
APA, Harvard, Vancouver, ISO, and other styles
10

Visweswaraiah, Swaroop. "Structural design and multi-objective optimization of an advanced composite rotor blade." Thesis, McGill University, 2011. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=97179.

Full text
Abstract:
Advanced composite materials provide a wide range of design freedom by virtue of their anisotropy. For the structural design and optimization of an advanced composite rotor blade, computationally efficient analytical models that can simulate the behaviour of the blade are necessary. A reliable and computationally efficient in-house cross-sectional analysis code has been developed for applications in the preliminary analysis and structural optimization of composite rotor blades. Parametric studies emphasizing the influence of the changes made to the internal structure of the blade are presented
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Composite Blade"

1

United States. National Aeronautics and Space Administration., ed. Composite blade structural analyzer (COBSTRAND) demonstration manual. National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

C, Chamis C., and United States. National Aeronautics and Space Administration., eds. Composite blade structural analyzer (COBSTRAN): Theoretical/programmer's manual. National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

R, Groepler David, and Ames Research Center, eds. Tiltrotor research aircraft composite blade repairs: Lessons learned. National Aeronautics and Space Administration, Ames Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

W, Nixon Mark, Rehfield Lawrence W, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Comparison of composite rotor blade models: A coupled-beam analysis and an MSC/NASTRAN finite-element model. National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

L, Dreshfield Robert, and United States. National Aeronautics and Space Administration., eds. Progress toward a tungsten alloy wire/high temperature alloy composite turbine blade. National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

L, Dreshfield Robert, and United States. National Aeronautics and Space Administration., eds. Progress toward a tungsten alloy wire/high temperature alloy composite turbine blade. National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

W, Wallace John, and Langley Research Center, eds. Mechanical properties of the fiberglass prepreg system used for the National Transonic Facility replacement blade set. NASA Langley Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

M, Russell Louis, Torres Frank John 1944-, and United States. National Aeronautics and Space Administration., eds. Local heat-transfer measurements on a large, scale-model turbine blade airfoil using a composite of a heater element and liquid crystals. National Aeronautics and Space Administration, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

M, Russell Louis, Torres Frank John 1944-, and United States. National Aeronautics and Space Administration., eds. Local heat-transfer measurements on a large, scale-model turbine blade airfoil using a composite of a heater element and liquid crystals. National Aeronautics and Space Administration, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

M, Russell Louis, Torres Frank John 1944-, and United States. National Aeronautics and Space Administration., eds. Local heat-transfer measurements on a large, scale-model turbine blade airfoil using a composite of a heater element and liquid crystals. National Aeronautics and Space Administration, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Composite Blade"

1

Yun-Cheng, Chen, Cheng Yu-Yue, and Wu Pei-Chao. "Design of 32-m Diameter GRP/Composite Blade." In Composite Structures 4. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3455-9_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ganguli, Ranjan. "Life Prediction of Composite Rotor Blade." In Structural Health Monitoring Technologies and Next-Generation Smart Composite Structures. CRC Press, 2016. http://dx.doi.org/10.1201/9781315373492-11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wierach, Peter, Johannes Riemenschneider, Steffen Opitz, and Frauke Hoffmann. "Experimental Investigation of an Active Twist Model Rotor Blade Under Centrifugal Loads." In Adaptive, tolerant and efficient composite structures. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29190-6_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chellil, S., A. Nour, A. Chellil, S. Lecheb, H. Mechakra, and A. T. Settet. "Dynamic Behavior of the Composite Rotor Blade Using an Adaptive Damper." In Proceedings of the Third International Symposium on Materials and Sustainable Development. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-89707-3_46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chortis, Dimitrios I. "Prediction of Nonlinear Damped Response of Large-Scale Blade Composite Structures." In Research Topics in Wind Energy. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00864-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jaksic, Vesna, Ciaran R. Kennedy, David M. Grogan, Sean B. Leen, and Conchúr M. Ó. Brádaigh. "Influence of Composite Fatigue Properties on Marine Tidal Turbine Blade Design." In Solid Mechanics and Its Applications. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-65145-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Helaili, Sofiene, Soufiene Bouajila, Hamid Kaddami, and Moez Chafra. "Turbine Blade Made of Natural Fiber Composite Structural and Vibrational Behavior." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14615-2_83.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sun, Fan, Chen Jiang, Yang Shen, and Haowen Wang. "Surrogate Model-Based Parametric Structural Design of a Composite Tiltrotor Blade." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2689-1_79.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fang, L. L., Bing Lin Zhang, and Ning Yao. "Fabrication of Accurate Diamond - Metal Composite Cutting Blade by Electrotyping Method." In Advances in Grinding and Abrasive Technology XIII. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-986-5.57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mimura, Masanao, Naoki Uno, and Kunio Doi. "Multilayer Composite Wires of Bi-Based Superconductor Prepared by Doctor-Blade Method." In Advances in Superconductivity IV. Springer Japan, 1992. http://dx.doi.org/10.1007/978-4-431-68195-3_121.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Composite Blade"

1

Li, H., and K. Chandrashekhara. "Structural Optimization of Laminated Composite Blade Using Particle Swarm Optimization." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88313.

Full text
Abstract:
Composite blades working underwater experience complicated loading conditions. Robust design of a composite blade for hydrokinetic applications should satisfy varying loading conditions and conservative failure evaluations. Blade manufacturing using composites requires extensive optimization studies in terms of composite materials, number of layers, stacking sequences, ply thickness and orientation. In the current study, particle swarm optimization (PSO) technique is adopted to conduct composite lay-up optimization for the turbine blade. Layer numbers, ply thickness and ply orientations are op
APA, Harvard, Vancouver, ISO, and other styles
2

RAVENHALL, R., and W. KOOP. "Metal matrix composite fan blade development." In 26th Joint Propulsion Conference. American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-2178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kam, T. Y. "Design and Fabrication of Composite Wind Blades for a 5kW Wind Power System." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-89877.

Full text
Abstract:
The development of composite wind blades for a 5kW wind turbine blade is presented. During the design process, the distributions of the twisting angle and wind load along the long axis of the blade are determined in the aerodynamic analysis of the blade. A finite element model is constructed for the design and stress analysis of the wind blade made of glass-fabric composites. The failure modes such as the first-ply failure and buckling of the skin of the composite wind blade are identified in the finite element analysis of the blade. The wind blade parts were fabricated using the hand-layup an
APA, Harvard, Vancouver, ISO, and other styles
4

Hojo, Masahiro, Ryosaku Hashimoto, Akinori Ogawa, Yasushi Sofue, and Yukio Matsuda. "Mechanical Behavior of Anti-Symmetrically Laminated Composite Blades." In ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68667.

Full text
Abstract:
Anti-symmetrically laminated composites have coupling effects between tensile stress and twisting deformation, and are very attractive as fan blade materials of aircraft engines. Blades fabricated by anti-symmetrically laminated composites can automatically adjust the stagger angle to better aerodynamic conditions with change of axial force or rotational speed owing to the coupling effects. Thus, the anti-symmetrically laminated composite blades are expected to improve aerodynamic efficiency and the stability of aircraft engines. In this paper, the mechanical behavior of anti-symmetrically lam
APA, Harvard, Vancouver, ISO, and other styles
5

FULTON, MARK, and DEWEY HODGES. "Application of composite rotor blade stability analysis to extension-twist coupled blades." In 33rd Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-2254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

MURRAY, ROBYNNE E., DANA SWAN, DAVID SNOWBERG, DEREK BERRY, RYAN BEACH, and SAM ROONEY. "Manufacturing a 9-Meter Thermoplastic Composite Wind Turbine Blade." In American Society for Composites 2017. DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/asc2017/15166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

HODGES, DEWEY. "A review of composite rotor blade modeling." In 29th Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics, 1988. http://dx.doi.org/10.2514/6.1988-2249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chellil, A., A. T. Settet, S. Lecheb, A. Nour, A. Yahiaoui, and H. Kebir. "Aeroelastic stability analysis of composite rotor blade." In 2013 5th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO 2013). IEEE, 2013. http://dx.doi.org/10.1109/icmsao.2013.6552604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Robison, Kevin E., Steve E. Watkins, James Nicholas, K. Chandrashekhara, and Joshua L. Rovey. "Instrumented composite turbine blade for health monitoring." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Andrew L. Gyekenyesi. SPIE, 2012. http://dx.doi.org/10.1117/12.915373.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Xiao, Jiaguangyi, Yong Chen, Qichen Zhu, Jun Lee, and Tingting Ma. "A General Ply Design for Aero Engine Composite Fan Blade." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-64377.

Full text
Abstract:
Composite fan blade ply lay-up design, which includes ply drop-off/shuffle design and stacking sequence design, makes fan blade structures different from traditional composite structures. It gives designers more freedom to construct high-quality fan blades. However, contemporary fan blade profiles are quite complex and twisted, and fan blade structures are quite different from regular composite structures such as composite laminates and composite wings. The ply drop-off design of a fan blade, especially for a fully 3D fan blade, is still an arduous task. To meet this challenge, this paper deve
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Composite Blade"

1

Bir, G., and P. Migliore. Preliminary Structural Design of Composite Blades for Two- and Three-Blade Rotors. Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/15009673.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

GRIFFIN, DAYTON A., and THOMAS D. ASHWILL. Blade System Design Studies Volume I: Composite Technologies for Large Wind Turbine Blades. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/800994.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bir, G. S. User's Guide to PreComp (Pre-Processor for Computing Composite Blade Properties). Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/876556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Guest, Daniel A., and Douglas S. Cairns. Manufacturing process modeling for composite materials and structures, Sandia blade reliability collaborative. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1204078.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mandell, J. F., D. D. Samborsky, D. W. Combs, M. E. Scott, and D. S. Cairns. Fatigue of Composite Material Beam Elements Representative of Wind Turbine Blade Substructure. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/14386.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Abumeri, Galib, and Frank Abdi. Advanced Composite Wind Turbine Blade Design Based on Durability and Damage Tolerance. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1034963.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cairns, Douglas S., and Scott M. Rossel. Fluid flow modeling of resin transfer molding for composite material wind turbine blade structures. Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/918294.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

LOCKE, JAMES, and CONTREARAS HIDALGO. The Implementation of Braided Composite Materials in the Design of a Bend-Twist Coupled Blade. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/801400.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cairns, Douglas S., Trey Riddle, and Jared Nelson. Wind turbine composite blade manufacturing : the need for understanding defect origins, prevalence, implications and reliability. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1011223.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

CAIRNS, DOUGLAS S., and JON D. SHRAMSTAD. Evaluation of Hand Lay-Up and Resin Transfer Molding in Composite Wind Turbine Blade Manufacturing. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/760737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography