Relevant bibliographies by topics / Computer numerical control systems (CNC)

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Computer numerical control systems (CNC)'

Author: Grafiati
Published: 5 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Computer numerical control systems (CNC).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Computer numerical control systems (CNC)"

1

Dr., Ignatius E. Ekengwu, and I.Emeruwa Kingsley. "Comprehensive Review of Computer Numerical Control (CNC) Systems." International Research Journal of Scientific Studies August 2024, no. 1 (2024): 50–55. https://doi.org/10.5281/zenodo.13324760.

Full text
Abstract:
Computer Numerical Control (CNC) systems are fundamental to the advancement of modern manufacturing, fundamentally transforming how precision engineering is achieved. These systems have revolutionized the production landscape by offering unmatched levels of precision, operational efficiency, and flexibility across a wide range of industrial applications. This extensive review provides an in-depth analysis of CNC technology, tracing its historical development from early concepts to its current sophisticated implementations. It examines the essential components that constitute CNC systems, inclu
APA, Harvard, Vancouver, ISO, and other styles
2

Jiang, Jing Jie, Hua Qing Tan, and Bo Yao. "A Multi-Platform Compatible and Open Software Architecture for Computer Numerical Control Systems." Advanced Materials Research 468-471 (February 2012): 430–33. http://dx.doi.org/10.4028/www.scientific.net/amr.468-471.430.

Full text
Abstract:
Abstract. By analyzing the current open software architectures for PC-based master-slave Computer Numerical Control(CNC) systems and soft-CNC systems, this paper put forward a multi-platform compatible open software architecture for the two types of CNC systems. The architecture is composed by five different function layers: CNC presentation Layer, CNC Business Layer, CNC Data Layer, NC Interface Layer and NCK Layer. Firstly, the WPF and the MVVM pattern decouple the User Interface (UI) presentation and business logic. Secondly, the component technology is used to decouple the business logic a
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Zhi Jun, Hong Lei Jia, Ji Yu Sun, and Meng Feng. "X6132 Universal Milling Machine Computer Numerical Control Transformation." Advanced Materials Research 562-564 (August 2012): 763–67. http://dx.doi.org/10.4028/www.scientific.net/amr.562-564.763.

Full text
Abstract:
Based on research and analysis of current condition of CNC transformation, the essay proposes a scheme to reconstruct X6132 universal horizontal miller. Analyze the technical parameters of old X6132 universal horizontal miller according to the techniques request of machining objects, then project the general transformation blue print of old machine. Design and calculation of mechanical part in machine, according to the general transformation blue print, the longitudinal feed system and the transverse feed systems are reconstructed. Hardware circuit design of CNC system, utilize single chip 803
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Mu Lan, Jian Min Zuo, Kun Liu, and Xing Hua Zhu. "FPGA-Based Intelligent Software Hardening Chip for Computer Numerical Control System." Applied Mechanics and Materials 105-107 (September 2011): 2217–20. http://dx.doi.org/10.4028/www.scientific.net/amm.105-107.2217.

Full text
Abstract:
In order to meet the development demands for high-speed and high-precision of Computer Numerical Control (CNC) machine tools, the equipped CNC systems begin to employ the technical route of software hardening. Making full use of the advanced performance of Large Scale Integrated Circuits (LSIC), this paper puts forward using Field Programmable Gates Array (FPGA) for the functional modules of CNC system, which is called Intelligent Software Hardening Chip (ISHC). The CNC system architecture with high performance is constructed based on the open system thought and ISHCs. The corresponding progra
APA, Harvard, Vancouver, ISO, and other styles
5

A., D. Awasare. "Integration of PLC in CNC Systems." Research and Applications of Thermal Engineering 7, no. 2 (2024): 19–23. https://doi.org/10.5281/zenodo.11609033.

Full text
Abstract:
<em>This research paper explores the integration of Programmable Logic Controllers (PLCs) into Computer Numerical Control (CNC) systems to augment control capabilities and flexibility in manufacturing processes. PLCs offer a versatile platform for real-time monitoring, data processing, and control logic implementation, complementing the high precision and automation features of CNC machines. The abstract provides an overview of the synergistic relationship between CNC and PLC technologies, highlighting the advantages of their integration in optimizing machining operations, improving process ef
APA, Harvard, Vancouver, ISO, and other styles
6

Bai, Ziyao. "Enhancing Mechanical Design, Manufacturing, and Automation through AI-Based Computer Numerical Control (CNC) Optimization." Revista Gestão & Tecnologia 25, no. 2 (2025): 74–89. https://doi.org/10.20397/2177-6652/2025.v25i2.3164.

Full text
Abstract:
The rapid advancements in artificial intelligence (AI) have provided new opportunities for optimizing Computer Numerical Control (CNC) technology, crucial for mechanical design, manufacturing, and automation. This study explores AI-driven optimization strategies in CNC systems to enhance machining efficiency, surface quality, tool life, and overall operational stability. The methodology integrates three AI technologies: reinforcement learning (RL) for tool path planning optimization, particle swarm optimization (PSO) for cutting parameter adjustment, and fuzzy logic for controlling abnormal si
APA, Harvard, Vancouver, ISO, and other styles
7

Han, Jun, and Rui Li Chang. "Developing and Research on Motion Controller Based on CPLD and MCU." Advanced Materials Research 490-495 (March 2012): 456–59. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.456.

Full text
Abstract:
Open Computer Numerical Control system (Open CNC) based on PC and the Windows operating system has been a major developing direction and a research focus of the current numerical control technology. At present, there have been all kinds of the Open CNC systems with high-speed and precision servo control boards, but they are too expensive. Therefore, developing an economical and practical motion controller is great significant for middle and small numerical control system
APA, Harvard, Vancouver, ISO, and other styles
8

Yusof, Yusri, and Kamran Latif. "A New ISO 14649 Translation Module for Open Architecture CNC Systems." Applied Mechanics and Materials 660 (October 2014): 878–82. http://dx.doi.org/10.4028/www.scientific.net/amm.660.878.

Full text
Abstract:
The Computer Numerical Control (CNC) machines works on the technology that uses minicomputers to generate, parse and execute the sequential control. These machines were introduced in 1970’s, this technology replaces the Numerical Control (NC) with the computers. The controller is the main part of the CNC machine that is composed of two parts: software and hardware. The software part of the controller is commonly known as interpreter that translates the International Standards Organization (ISO) data interface model instructions to the hardware part of the controller. Todays commercial CNC syst
APA, Harvard, Vancouver, ISO, and other styles
9

Racz, Sever-Gabriel, Radu-Eugen Breaz, and Lucian-Ionel Cioca. "Evaluating Safety Systems for Machine Tools with Computer Numerical Control using Analytic Hierarchy Process." Safety 5, no. 1 (2019): 14. http://dx.doi.org/10.3390/safety5010014.

Full text
Abstract:
Computer numerical control (CNC) machine tools are complex production systems with fully automatic machine parts. Nowadays, high feed rates and machining speeds are used during the machining process. Human operators are still needed to set-up the machine, load/unload workpieces and parts, load the machining code, and supervise the machining process. The operators work in an environment where automated high-speed motions occur, and consequently, CNC machine tools have to be equipped with safety systems. The approach presented in this paper was to evaluate the main safety systems of CNC machine
APA, Harvard, Vancouver, ISO, and other styles
10

Frolov, E. M., and A. V. Rogachev. "POSSIBILITIES OF USING SERIAL CNC EQUIPMENT AS A BASIS FOR BUILDING DIGITAL PRODUCTION SITES." IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY, no. 3(250) (March 26, 2021): 41–43. http://dx.doi.org/10.35211/1990-5297-2021-3-250-41-43.

Full text
Abstract:
The article addresses the problem of building cyber-physical control systems of metal machining based on commercial computer numerical machine control systems (CNC). The article provides an overview of possibilities of integrating third-party software into common CNC units. The analysis has revealed a universal way of integration and resulted in a diagram of the cyber-physical machining system.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Computer numerical control systems (CNC)"

1

Moore, Robert Keith. "Computer aided programming of a CNC lathe." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25123.

Full text
Abstract:
A software package and associated hardware have been developed which gives users of the ORAC CNC Training Lathe an easier and faster method of manufacturing on the lathe. The package, entitled ORACAP, uses the computing power of a mini-mainframe computer, a VAX 11/750, to assist in part design, program generation, program optimization, and program proving for the ORAC Lathe. The package is designed for users unfamiliar with computers such as students in an educational institute or workers in a production facility and uses command procedures to simplify the preparation and execution of the modu
APA, Harvard, Vancouver, ISO, and other styles
2

Yevsieiev, V., and N. Demska. "Analysis of Methods of Control of CNC Machines in Cyber-Physical Production Systems." Thesis, European Scientific Platform, 2021. https://openarchive.nure.ua/handle/document/20289.

Full text
Abstract:
It is determined that the best option for the machine control system with CNC in the creation of cyber-physical production systems for Smart Manufacturing - are intelligent control systems that allow you to reflect physical processes in digital prostrate in real time, which is a key requirement in Ops 4.0 concepts
APA, Harvard, Vancouver, ISO, and other styles
3

Du, Plooy Elsje. "3-D Computer-aided Design (CAD) and Computer Numerical Control (CNC) milling : An alternative to traditional ceramics master moulding technology." Thesis, Bloemfontein: Central University of Technology, Free State, 2014. http://hdl.handle.net/11462/236.

Full text
Abstract:
Thesis (M. Tech. (Design and Studio Art)) -- Central University of Technology, Free State, 2014<br>This quantitative research project investigates the utilization of emerging technologies within the arts with a view on establishing an interdisciplinary approach between ceramics and engineering. The traditional manufacturing method of producing master moulds is a time-consuming process for the studio ceramicist. This study explores whether computer-aided design (CAD) and computer numerical control (CNC) milling can accelerate the design and manufacturing process when developing master moulds
APA, Harvard, Vancouver, ISO, and other styles
4

Austin, Andrew. "Process Capability in a Computer Integrated Manufacturing Cell." TopSCHOLAR®, 2014. http://digitalcommons.wku.edu/theses/1322.

Full text
Abstract:
With the rise of automation in traditional manufacturing processes, more companies are beginning to integrate computer integrated manufacturing (CIM) cells on their production floors. Through CIM cell integration, companies have the ability to reduce process time and increase production. One of the problems created with CIM cell automation is caused by the dependency the sequential steps have on one another. Dependency created by the previous step increases the probability that a process error could occur due to previous variation. One way to eliminate this dependency is through the use of an
APA, Harvard, Vancouver, ISO, and other styles
5

Karyagina, Marina. "Life cycle cost modelling for fault-tolerant CNC architectures." Thesis, Queensland University of Technology, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Quesada, Robert E. "Alternative assessment of computer numerical control (CNC) machine tool students." Online version, 1999. http://www.uwstout.edu/lib/thesis/1999/1999quesada.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ebrahimi, S. Morteza K. "Dynamic modelling and simulation of a CNC milling machine." Thesis, Cardiff University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287909.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Statham, Craig G. "An open CNC interface for intelligent control of grinding." Thesis, Liverpool John Moores University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Barrow, Abigail Anne. "Acquiring technological capabilities : the CNC machine tool industry in industrialising countries, with special reference to South Korea." Thesis, University of Edinburgh, 1989. http://hdl.handle.net/1842/19163.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Torres-Chazaro, Octavio F. "Design and evaluation of CNC-user interfaces." Diss., Virginia Tech, 1992. http://hdl.handle.net/10919/39787.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Computer numerical control systems (CNC)"

1

Nanfara, Frank. The CNC workshop: A multimedia introduction to computer numerical control. Addison-Wesley, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nanfara, Frank. The CNC workshop: A multimedia introduction to computer numerical control, version 2.0. Prentice Hall, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fähnrich, K. P. Ein System zur wissensbasierten Diagnose an CNC-Werkzeugmaschinen durch den Maschinenbediener. Springer-Verlag, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Valentino, James. Introduction to computer numerical control (CNC). 4th ed. Pearson Prentice Hall, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Joseph, Goldenberg, ed. Introduction to computer numerical control (CNC). 5th ed. Prentice Hall, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Smid, Peter. CNC control setup for milling and turning: Mastering CNC control systems. Industrial Press Inc., 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Engineers, Society of Manufacturing, ed. Computer numerical control: Concepts and programming. 2nd ed. Delmar Publishers, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Engineers, Society of Manufacturing, ed. Computer numerical control: Concepts and programming. 3rd ed. Delmar Publishers, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tony, Uccello, and Murphy Derek, eds. The CNC workbook: An introduction to computer numerical control. Addison-Wesley Pub. Co., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Stanton, George C. Numerical control programming: Manual CNC and APT/Compact II. Regents/Prentice Hall, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Computer numerical control systems (CNC)"

1

Benner, Peter, Ralph Byers, Volker Mehrmann, and Hongguo Xu. "Numerical Methods for Linear Quadratic and H ∞ Control Problems." In Dynamical Systems, Control, Coding, Computer Vision. Birkhäuser Basel, 1999. http://dx.doi.org/10.1007/978-3-0348-8970-4_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Considine, Douglas M., and Glenn D. Considine. "Computer Numerical Control—State-of-the-Art Systems." In Standard Handbook of Industrial Automation. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-1963-4_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mehrmann, Volker, and Paul Van Dooren. "Basic Numerical Methods and Software for Computer Aided Control f Design." In Encyclopedia of Systems and Control. Springer London, 2015. http://dx.doi.org/10.1007/978-1-4471-5058-9_143.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mehrmann, Volker, and Paul Van Dooren. "Basic Numerical Methods and Software for Computer-aided Control Systems Design." In Encyclopedia of Systems and Control. Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5102-9_143-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mehrmann, Volker, and Paul Van Dooren. "Basic Numerical Methods and Software for Computer Aided Control Systems Design." In Encyclopedia of Systems and Control. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-44184-5_143.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Jun. "Application of Computer Aided Design and Numerical Control Technology in Error Analysis of Numerical Control Machine Tools." In Application of Intelligent Systems in Multi-modal Information Analytics. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-74814-2_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Miller, Eddi, Anna-Maria Schmitt, Tobias Kaupp, Rafael Batres, Andreas Schiffler, and Jan Schmitt. "A Peak Shaving Approach in Manufacturing Combining Machine Learning and Job Shop Scheduling." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77429-4_59.

Full text
Abstract:
AbstractComputerized Numerical Control (CNC) plays an important role in highly autonomous manufacturing systems with multiple machine tools. The necessary Numerical Control (NC) programs to manufacture the parts are mostly written in standardized G-code. An a priori evaluation of the energy demand of CNC-based machine processes opens up the possibility of scheduling multiple jobs according to balanced energy consumption over a production period. Due to this, we present a combined Machine Learning (ML) and Job-Shop-Scheduling (JSS) approach to evaluate G-code for a CNC-milling process with resp
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, Dong, Donghai Li, Yanzhen Chang, and Youqing Wang. "Numerical Simulation and Linear Active Disturbance Rejection Control of Unstable Heat Conduction Systems." In Communications in Computer and Information Science. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-34381-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wei, Lisheng, Ming Jiang, and Minrui Fei. "Stability Analysis and Numerical Simulation for a Class of Multi-variable Networked Control Systems." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-11842-5_61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Della Penna, Giuseppe, Francesca Fallucchi, Benedetto Intrigila, and Daniele Magazzeni. "A Genetic Approach to the Automatic Generation of Fuzzy Control Systems from Numerical Controllers." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-74782-6_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Computer numerical control systems (CNC)"

1

Xiaoyu, Huan. "Research on Deep Neural Network Optimization Algorithm in Precision Numerical Control System." In 2024 IEEE 7th International Conference on Information Systems and Computer Aided Education (ICISCAE). IEEE, 2024. https://doi.org/10.1109/iciscae62304.2024.10761614.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kurfess, Thomas, Tommy Tucker, Chelsea Silberglied, Roby Lynn, Kyle Saleeby, and Christopher Saldana. "Multi-Axis Voxel-Based CNC Machining of Centrifugal Compressor Assemblies." In Vertical Flight Society 74th Annual Forum & Technology Display. The Vertical Flight Society, 2018. http://dx.doi.org/10.4050/f-0074-2018-12798.

Full text
Abstract:
The use of computer-aided manufacturing (CAM) software is essential in the rapid production of high-quality computer numerical control (CNC) machining toolpaths for complex parts. Typical CAM software relies on analytical representations of part geometry, where curves and surfaces are described by parametric functions. This paper proposes the use of a novel way to represent part geometry known as a voxel model. A voxel model uses a three-dimensional array of small cubes to represent a part volume; these cubes, or voxels, are the three-dimensional analog of two-dimensional pixels in an image. T
APA, Harvard, Vancouver, ISO, and other styles
3

Sanchez, Joseph, Chuan Zhang, John Aguada, Jane Li, Jiaqi Tang, and Chris Richardson. "Advanced Package Sample Preparation Leveraging Precision CNC-Based Milling and Selective Microwave Induced Plasma Etching." In ISTFA 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.istfa2024p0492.

Full text
Abstract:
Abstract The rapid development of advanced packaging technologies for high-performance computing (HPC) applications poses significant challenges for sample preparation methodologies. Conventional techniques are often insufficient to cope with the complex architectures and heterogeneous materials of modern packages, such as COWOS (Chip-on-Wafer-on-Substrate) and 3D structures. In this paper, we present a novel approach for sample preparation that leverages precision CNC (Computer Numerical Control) milling and selective MIP plasma etch. These methods enable precise and selective removal of unwa
APA, Harvard, Vancouver, ISO, and other styles
4

Sang, Zhiqian, and Xun Xu. "Development of a Smart Computer Numerical Control System." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65984.

Full text
Abstract:
Traditional Computer Numerical Control (CNC) machines use ISO6983 (G/M code) for part programming. G/M code has a number of drawbacks and one of them is lack of interoperability. The Standard for the Exchange of Product for NC (STEP-NC) as a potential replacement for G/M code aims to provide a unified and interoperable data model for CNC. In a modern CNC machine tool, more and more motors, actuators and sensors are implemented and connected to the NC system, which leads to large quantity of data being transmitted. The real-time Ethernet field-bus is faster and more deterministic and can fulfil
APA, Harvard, Vancouver, ISO, and other styles
5

Zheng, Shu-zhi, Li-xun Wu, Chun-Xiang Zhang, and Jun-Xia Li. "Software development for CNC (computer numerical control) machine main transmission system design." In 2012 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER). IEEE, 2012. http://dx.doi.org/10.1109/cyber.2012.6320033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Venkatesh, S., R. Morihara, J. Michaloski, and F. Proctor. "Closed Loop CNC Manufacturing: Connecting the CNC to the Enterprise." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-35760.

Full text
Abstract:
Closed Loop manufacturing describes the use of feedback from a Computer Numerical Control (CNC) to the Enterprise Resource Planning (ERP) to help in business operations. Although conceptually simple, many obstacles make CNC-ERP connectivity difficult — incompatibilities of various generations of systems supplied by multiple vendors, differing personnel mindsets and objectives, and outright complexity of ERP. A long journey starts with a single step, and this paper describes a successful pilot project that detected scrap on a CNC during production of the Boeing 737 Leading Edge panels and then
APA, Harvard, Vancouver, ISO, and other styles
7

Pardo, Richard, Leonardo Vinces, and Kasen Tong. "A CAD / CAM system for rapid prototyping by adding or subtracting materials using Computer Numerical Control (CNC)." In 2019 IEEE XXVI International Conference on Electronics, Electrical Engineering and Computing (INTERCON). IEEE, 2019. http://dx.doi.org/10.1109/intercon.2019.8853567.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rynes, Matthew, Leila Ghanbari, Jay Jia Hu, et al. "Principles of Computer Numerical Control Applied to Small Research Animal Surgical Procedures." In 2018 Design of Medical Devices Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/dmd2018-6959.

Full text
Abstract:
The tools and techniques available for systems neuroscientists for neural recording and stimulation during behavior have become plentiful in the last decade. The tools for implementing these techniques in vivo, however, have not advanced respectively. The use of these techniques requires the removal of sections of skull tissue without damaging the underlying tissue, which is a very delicate procedure requiring significant training. Automating a part of the tissue removal processes would potentially enable more precise procedures to be performed, and it could democratize these procedres for wid
APA, Harvard, Vancouver, ISO, and other styles
9

Rincon, Liz K., and Joa˜o M. Rosario. "Influence of Nonlinear Friction and Disturbance in the Control of a Mechatronic System: CNC Machine Tool Application." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-48553.

Full text
Abstract:
The CNC (Computer Numerical Control) machine tools are complex mechatronic systems applied to the manufacture with high precision and high speeds. To achieve high accuracy and operational efficiency, the disturbance and friction, which occur during machining process, should be reduced as low as possible. This paper develops an analysis of influence by cutting force and friction effect in the control of machine tool based on the CNC dynamic model and parameters identification. For this purpose, the study focuses on Coulomb and Viscous nonlinear friction and the external disturbances. The analys
APA, Harvard, Vancouver, ISO, and other styles
10

Hunko, Wesley S., and Lewis N. Payton. "Implementing Computer Numerical Controls Affordably at a Four Year University." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-66152.

Full text
Abstract:
Additive manufacturing, fundamentally, is computerized numerical controls using a specialized printer head as the “tool”. Any new curriculum implementing “additive manufacturing” stands upon the fundamental and advanced work done before in computer numerical controls. Although there certainly is a need for end user laboratories based upon purchased printers, the challenge in designing curriculums that support developing the next generation of additive manufacturing must also include computer numerical controls. The best designers must be able to picture the entire system when developing new sy
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Computer numerical control systems (CNC)"

1

Baxter, Carey, Karlee Feinen, and Megan Tooker. Headstone inventory and scanning at Mare Island Naval Cemetery, California. Engineer Research and Development Center (U.S.), 2025. https://doi.org/10.21079/11681/49736.

Full text
Abstract:
The National Cemetery Administration (NCA) tasked the US Army Engineer Research and Development Center, Construction Engineering Re-search Laboratory (ERDC-CERL), with inventorying and scanning the nonmilitary headstones at Mare Island Naval Cemetery. The cemetery is located in Vallejo, California, and is part of the Mare Island Naval Ship-yard historic district, which was listed concurrently on the National Register of Historic Places and as a national historic landmark in 1975. The research in this report will assist the US Department of Veterans Affairs (VA), NCA, with compliance with the N
APA, Harvard, Vancouver, ISO, and other styles
2

Patel, Yusef. File to Factory: A case study of automated prefabrication house-building methods for small-to-medium enterprises. Unitec ePress, 2017. http://dx.doi.org/10.34074/ocds.0823.

Full text
Abstract:
The Eco-Digital Fabrication (EDFAB) research project aimed to investigate how automated prefabrication technologies and off-the-shelf construction products can be employed to disrupt building industry norms. The aim of this research – conducted at the University of Auckland and Unitec Institute of Technology from 2014 onward – was to provide small-to-medium enterprises in the construction industry with a pathway to upskill and increase construction productivity through the use of these processes. The availability of automated machines and easy-to-use fabrication software is increasing dramatic
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Computer numerical control systems (CNC)' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography