Dissertations / Theses on the topic 'Conductometry'

The first part of thesis is theoretical and it is the introduction into conductometry. It defines the essential terms of this field as well as contact and contactless methods of measurement of fluid conductivity and also the influential parasitic phenomena and possibilities of their elimination. The second part is dealing with design of the contactless transformer conductivity probe. The characteristics of designed probe are verified in the practical part of the thesis. The final part of the thesis is dealing with measurement according to the defined points in the assignment. The characteristics of several contact probes are verified and also the characteristic of the contactless transformer probe, which was implemented according to the design from the second part. Outcomes of these measurements establish the suitable power supply frequencies and currents for all these probes.

A method is described for preset-count irradiations between 1 and 100 ions singling-out individual ions from an ion beam with more than a billion ions arriving per second. The ion tracks are etched in a conductometric system with real-time evaluation of the acquired data. The etch process can be interrupted when reaching a preset channel diameter. Cylindrical channels are obtained by adding surfactants to the etch solution forming a self-assembled barrier between etching medium and polymer. Asymmetric etching of single ion tracks leads to pH sensitive conical pores with diode-like properties. Using etched channels as template, homogeneous and multilayer magnetic single-wires are electrodeposited. The magnetoresistivity of the wires is studied. Single-track applications comprise critical apertures (cylindric, conic, necked), asymmetric pores (pH sensitive, biospecific), Giant Magneto Resistance sensors, and spintronic devices. On the basis of studies with individual ion tracks we tackled tilted multiporous systems such as ion beam lithography with a masked ion beam leading to micro-structures with inclined walls and anisotropic superhydrophobic ion track textures, analogous to biological shingle structures on butterfly wings. We demonstrated qualitatively, that the asymmetry of the texture translates into motion under ultrasonic agitation. This could lead to the development of rotary drives.

Over the last decade, immobilization of proteins onto inorganic materials is becoming more crucial to extend a deep understanding of interaction between proteins and nanoparticles. With understanding of the real interaction lying under the protein-nanoparticle relations, it is possible to organize the conformation and orientation of surface and framework species of nanoparticles to generate ideal surfaces for potential biotechnological applications. Due to their unique properties such as large clean surface, tunable surface properties, adjustable surface charge, and dispersibility in aqueous solutions, zeolite and zeo-type materials are one of the remarkable classes of inorganic materials that are widely studied in the literature. These properties make zeolites promising alternative candidates for the immobilization of enzymes and incorporation into biosensing devices. In the current study, a new approach was developed for direct determination of urea, glucose, and butyrylcholine where zeolites were incorporated to the electrode surfaces of a conductometric biosensor and Ion Sensitive Field Effect Transistors were used to immobilize the enzymes. Biosensor responses, operational stabilities, and storage stabilities of the new approach were compared with results obtained from the standard membrane methods for the same measurements. For this purpose, different surface modification technique, which are simply named as Zeolite Modified Transducers (ZMTs) were compared with Standard Membrane Transducers (SMTs). During the conductometric measurements ZMT electrodes were used, which allowed the direct evaluation of the effect of zeolite morphology on the biosensor responses for the first time. It was seen that silicalite added electrodes lead to increased performances with respect to SMTs. As a result, the zeolite modified urea and glucose biosensors were successfully applied for detecting urea and glucose, which can offer improved possibilities to design biosensors. The results obtained show that zeolites could be used as alternatives for enzyme immobilization in conductometric biosensors development. Furthermore, the sensitivities of urease and butyrylcholinesterase biosensors, prepared by the incorporation of zeolite Beta crystals with varying acidity on the surface of pH-sensitive

Les biocapteurs sont des moyens d'analyse en plein essor à la fois rapides, sélectifs et peu coûteux applicables à des domaines extrêmement variés (environnement, santé, agroalimentaire,…). Dans ce type d'outil, un élément sensible de nature biologique (anticorps, enzyme, microorganisme, ADN…) doté d'un pouvoir de reconnaissance pour un analyte ou un groupe d'analytes est associé à un transducteur pouvant être de type électrochimique, optique ou thermique. Dans ce travail, nous nous sommes intéressés au développement de trois biocapteurs utilisant des enzymes de la famille des oxydo-réductases (alcool oxydase, lactate oxydase et formaldéhyde déshydrogénase) pour la détection d'analytes d'intérêt dans le domaine de l'agroalimentaire ou de l'environnement (alcools, lactate et formaldéhyde). Les trois enzymes ont été immobilisées sur des microélectrodes interdigitées en or en vue d'une détection conductimétrique. Nous avons cherché à mieux comprendre le fonctionnement des biocapteurs et optimisé le procédé d'immobilisation des enzymes ainsi que différents paramètres de fabrication ou de mesure afin de maximiser les performances analytiques des outils développés (sélectivité, limite de détection, reproductibilité, stabilité). Nous avons également démontré les potentialités d'application des deux biocapteurs conductimétriques à base de lactate oxydase et de formaldéhyde déshydrogénase pour la détection du lactate dans les produits laitiers et du formaldéhyde dans les eaux<br>Biosensors are rapid, selective and inexpensive devices that combine a biological recognition element, the so-called bioreceptor (e.g. enzymes, antibodies, DNA or microorganisms) to a physical transducer (e.g. electrochemical, optical, thermal or piezoelectrical). They can be used to detect one specific analyte or one family of analytes for a wide range of applications (e.g. environment, food, health). In this work, we developed biosensors based on three oxidoreductases (alcohol oxidase, lactate oxidase and formaldehyde dehydrogenase) for primary alcohols, lactate and formaldehyde analysis. The three enzymes were immobilized on interdigitated gold microelectrodes in view of conductometric detection. We tried to achieve a better understanding of biosensors processing and optimized enzyme immobilization as well as several fabrication or operational parameters to maximize analytical performances (selectivity, detection limit, reproducibility and stability). We also demonstrated the applicability of both conductometric biosensors based on lactate oxidase and formaldehyde dehydrogenase for the detection of lactate in dairy products and formaldehyde in waters

Les travaux développés dans ce manuscrit de thèse entrent dans le cadre du projet européen intitulé « Hearten », « A co-operative mHealth environment targeting adherence and management of patients suffering from Heart Failure (HF) ». Les acteurs de ce projet cherchent à développer une plateforme réseau multi compétences dont le but est le diagnostic précoce et le suivi des patients atteints d'insuffisance cardiaque. Elle permet l'enregistrement de différents paramètres vitaux de ces patients, comme la pression artérielle, le poids, les biomolécules contenus dans les biofluides, et leur consultation immédiate par les différents acteurs en charge du suivi des patients. L'objectif des travaux de recherche présentés dans ce manuscrit est de développer un capteur de gaz conductimétrique portable et miniaturisé, permettant la mesure en temps réel des VOCs caractéristiques du syndrome HF dans l'air expiré par les patients. La molécule d'acétone, connue dans la littérature pour être l'un des biomarqueurs les plus discriminants d'HF, a été particulièrement ciblée. Le capteur ainsi conçu est formé de paires de microélectrodes interdigitées (µIDEs) en or déposées sur substrat de silicium. La partie sensible du capteur consiste en une membrane polymérique électro-déposée à la surface du capteur qui est sensible à l'acétone. Les paramètres géométriques des µIDES ont été analysés et optimisés au cours de ces travaux afin d'améliorer la réponse et la sensibilité du capteur. Une plateforme d'analyse des gaz contenant l'ensemble de l'instrumentation associée à notre capteur a été développé. Les paramètres de l'instrumentation ont également été analysés et optimisés dans le même but. Nous avons ainsi étudié deux types de membranes polymériques sensibles à l'acétone. La première couche sensible développée est basée sur la co-polymérisation d'un polymère et de nanomatériaux dopants, le chitosan et les zéolites. La seconde couche sensible développée est quant à elle basée sur la co-polymérisation de polypyrrole et de métallophthalocyanines. Le capteur développé présente des performances optimales pour ce projet, dont notamment une limite de détection de l'ordre du ppm, ainsi que des temps de réponse et de recouvrement très courts. L'utilisation de ce capteur dans le cas de mesures cliniques est ainsi très prometteuse puisqu'il permet d'analyser plusieurs échantillons en temps réel, et ceux sur une durée de fonctionnement de plus d'une semaine. Le diagnostic rapide et la prise en charge du patient est donc facilité grâce à ce dispositif, dont les couts de fabrication sont très réduits<br>The work presented in this manuscript is part of the European project « Hearten », « A co-operative mHealth environment targeting adherence and management of patients suffering from Heart Failure (HF) ». The actors of this project are seeking for developing a multi-competence network platform whose goal is the early diagnosis and follow-up of patients with heart failure. It allows the recording of various vital parameters of these patients, such as blood pressure, weight, biomolecules contained in biofluids, and their immediate consultation by the different actors in charge of patient follow-up.The objective of research presented in this manuscript is to develop a portable conductometric gas sensor, allowing the measurement of characteristic VOCs of HF syndrome in exhaled air by patients. Acetone molecule, known in the literature as one of the most discriminating biomarkers of HF, has been particularly targeted. The sensor thus designed is based on pairs of gold interdigitated microelectrode etched on a silicon substrate. The sensitive part of the sensor consists of a polymeric membrane sensitive to acetone and electro-deposited on the surface of the sensor. The geometrical parameters of the µIDES have been analyzed and optimized during these works to improve the response and sensitivity of the sensor. A gas analysis platform including all the instrumentation associated with our sensor has been developed. The instrumentation parameters have also been analyzed and optimized for the same purpose.We studied two types of polymeric membranes sensitive to acetone. The first sensitive layer developed was based on the co-polymerization of a polymer and doping nanomaterials, chitosan and zeolites. The second sensitive layer developed was based on the co-polymerization of polypyrrole and metallophthalocyanines. The developed sensor provides optimal performance for this project, including a detection limit in the order of ppm level, as well as very short response and recovery times. The sensor can therefore be considered in the case of clinical measurements.The use of this sensor in the case of clinical measurements is very promising because it allows to analyze several samples in real time, and those over a period of operation of more than one week. Rapid diagnosis and patient management is therefore facilitated by this device, whose manufacturing costs are very low

Lead-acid batteries are the oldest and most common type of secondary cells. Their biggest use is as a power source for a car starter. Bipolar lead-acid batteries could also be used for new applications such as power sources for hybrid electrical vehicles (HEV) for their high power. But there are still many technical problems limiting its use in these applications, which have to be overcome. This could cover parasite reactions as is gas creation, heat removal from the battery and another big problem is substrate corrosion. This diploma thesis concerns the actual state of bipolar lead batteries in the world with detail orientation to substrate corrosion. This thesis describes the conductometric method of lotion conductivity measurement and its modification for measurement of lead grid conductivity. From that we can find out, that when material loses more conductivity, the greater the corrosion. This thesis describes needed preparative experiments for assurance, that the conductometric method can be used for corrosion speed measurement and there are other experiments testing different lead alloys for corrosion speed.

Les biocapteurs sont des moyens d'analyse en plein essor à la fois rapides, sélectifs et peu coûteux applicables à des domaines extrêmement variés (environnement, santé, agroalimentaire,…). Dans ce type d'outil, un élément sensible de nature biologique (anticorps, enzyme, microorganisme, ADN…) doté d'un pouvoir de reconnaissance pour un analyte ou un groupe d'analytes est associé à un transducteur pouvant être de type électrochimique, optique ou thermique. Dans ce travail, nous nous sommes intéressés au développement de différents biocapteurs, en se basant à l'immobilisation d'enzymes sur des microélectrodes en vue de la détection électrochimique d'analytes d'intérêt dans le domaine environnemental. Nous avons montré les potentialités d'application de deux biocapteurs conductimétrique et impédimétrique à base de lipase Candida Rugosa pour la détection directe et rapide des pesticides organophosphorés. Nous avons cherché à mieux comprendre le fonctionnement des biocapteurs et optimisé le procédé d'immobilisation des enzymes ainsi que différents paramètres de mesure afin de maximiser les performances analytiques des outils développés. Nous avons également élaboré un biocapteur impédimètrique pour une détermination très sensible de la phospholipase A2 en utilisant les nanoparticules d'or afin de renforcer la conductivité électrique. Enfin, nous avons développé un biocapteur de tyrosinase pour la détection du Bisphénol A, en se basant sur la modification électrochimique des électrodes de diamant dopé qui possèdent des propriétés électriques remarquables et uniques, avec l'ajout de nanotube de carbone multi-feuillet, ce qui permet d'améliorer des performances analytiques du biocapteur, en particulier sa limite de détection et sa stabilité. Les biocapteurs à base de lipase et de tyrosinase ont été appliqués avec succès à la quantification des composés organophosphorés et du bisphénol A respectivement dans plusieurs échantillons d'eaux réelles<br>A biosensor is an analytical device, used for the detection of an analyte, that combines a biological component so-called a receptor (e.g. enzyme, antibody, DNA, microorganism) to a physical transducer (e.g. electrochemical, optical or thermal). In last decade, biosensors are quite promising tools since they are rapid, selective and cost effective, with an increasing interest for their application in various fields (e.g environment, food, health). In this work, we developed different biosensors based on immobilized enzymes onto microelectrodes in view of electrochemical detection. First, we demonstrated the potentialities of conductometric and impedimeteric biosensors based on lipase from Candida Rugosa for direct and rapid detection of organophosphate pesticides. In order to enhance the analytical performances of the developed devices, we tried to optimize enzyme immobilization as well as several operational parameters. We also elaborated an impedimetric biosensor for a sensitive determination of phospholipase A2 activity. Finally, a tyrosinase biosensor was developed for ultra-sensitive detection of Bisphenol A, based on the unique proprieties of boron doped diamond electrodes and taking advantage the use of multi walled carbon naotubes to improve the stability and detection limit of biosensor. We also demonstrated the applicability of both biosensors based on lipase and tyrosinase for the detection of organophosphate pesticides and bisphenol A in river water

This thesis deals with ionic liquids, their conductivity and the action of the electrode materials, separators and current collectors. The theoretical part is focused on the properties of ionic liquids, Li-ion batteries, corrosion, conductivity and analysis elements. The practical part is focused on the production of graphite electrodes, measuring the conductivity of ionic liquids with different parts of lithium – ion battery and measuring the potential window. Also, there is the effect of ionic liquids described in these parts.

Les biocapteurs sont des moyens d’analyse en plein essor à la fois rapides, sélectifs et peu coûteux applicables à des domaines extrêmement variés (environnement, santé, agroalimentaire,…). Dans ce type d’outil, un élément sensible de nature biologique (anticorps, enzyme, microorganisme, ADN…) doté d’un pouvoir de reconnaissance pour un analyte ou un groupe d’analytes est associé à un transducteur pouvant être de type électrochimique, optique ou thermique.Dans ce travail, nous nous sommes intéressés au développement de trois biocapteurs pour la détection de substances biologiquement actives. Le premier permet la détermination simultanée de l’adénosine triphosphate (ATP) et du glucose par ampérométrie, le deuxième celle de la créatine kinase, et le troisième est un biocapteur conductimétique pour la quantification de l’ATP. Dans les deux premiers biocapteurs, deux enzymes (l’hexokinase et la glucose oxydase) sont immobilisées à la surface de microélectrodes constituées d’un disque de platine. Le troisième biocapteur est basé sur l’immobilisation de l’hexokinase sur des microélectrodes interdigitées en or. L’immobilisation est réalisée dans tous les cas par co-réticulation des enzymes en présence d’albumine de sérum bovin à l’aide de glutaraldehyde. Les caractéristiques analytiques des biocapteurs ont été déterminées et différentes procédures ont été développées pour l’analyse d’échantillons réels. Les biocapteurs ont pu être appliqués avec succès à la quantification de l’ATP, du glucose et de la créatine kinase dans des préparations pharmaceutiques et du sérum sanguin<br>Biosensors are rapid, selective and inexpensive devices that combine a biological recognition element, the so-called bioreceptor (e.g. enzymes, antibodies, DNA or microorganisms) to a physical transducer (e.g. electrochemical, optical, thermal or piezoelectrical). They can be used to detect one specific analyte or one family of analytes for a wide range of applications (e.g. environment, food, health). In this work, the detection of biologically active substances was targeted. A biosensor system for simultaneous determination of adenosine triphosphate (ATP) and glucose, a biosensor for creatine kinase analysis, and a novel conductometric biosensor for ATP determination were developed. In the first two biosensors, two enzymes (hexokinase and glucose oxidase) were immobilized at the surface of platinum disc microelectrodes for amperometric detection. The third biosensor was based on hexokinase immobilized onto gold interdigitated microelectrodes for conductometric detection. In all cases, the enzymes were co-immobilized with bovine serum albumin by cross-linking using glutaraldehyde. Analytical characteristics of the biosensors were determined and different procedures were developed for real samples analysis. The biosensors could be successfully applied to the determination of ATP, glucose, and creatine kinase in pharmaceutical samples and blood serum

Dans ce travail, nous nous sommes intéressés au développement d’un nouveau biocapteur enzymatique ultrasensible pour la détection conductimétrique d’une mycotoxine, l’ochratoxine A (OTA). Une peptidase, la thermolysine (TLN), a été choisie comme élément de reconnaissance. Le biocapteur proposé est basé sur l’immobilisation de la TLN dans une matrice d’alcool polyvinylique (PVA)/polyéthylènimine (PEI) contenant des nanoparticules d’or et réticulée à la surface de microélectrodes interdigitées à l’aide de vapeurs de glutaraldéhyde. Dans les conditions optimales (35 min de réticulation, mesure à pH 7 et 25°C), la réponse du biocapteur est linéaire jusqu’à 60 nM et la limite de détection est de 1 nM. Cette valeur est 700 fois plus basse que celle obtenue en utilisant une méthode d’immobilisation basée sur la co-réticulation de la TLN en présence d’albumine de sérum bovin (BSA). La matrice PVA/PEI crée un environnement aqueux favorable à l’enzyme. Par ailleurs, les interactions entre les groupements amines protonés du PEI et les charges négatives des nanoparticules citratées et de la TLN améliore leur dispersion dans la matrice et favorise la stabilisation de l’enzyme et son accessibilité au substrat (OTA). Le biocapteur conductimétrique développé est très reproductible et stable pendant 30 jours lorsqu’il est stocké à 4°C dans du tampon phosphate 20 mM pH7 entre 2 mesures. Le biocapteur a ensuite été évalué sur des échantillons d’huile d’olive commerciale dopée. Aucun prétraitement de l’échantillon n’a été nécessaire et des taux de recouvrement proches de 100% ont été obtenus, démontrant l’absence d’effet de matrice<br>A new ultrasensitive enzymatic biosensor for the direct conductometric detection of ochratoxin A (OTA) has been developed in this work. Thermolysin (TLN), a peptidase, was chosen as recognition element. The proposed biosensor is based on TLN immobilization into a polyvinyl alcohol (PVA)/polyethylenimine (PEI) matrix containing gold nanoparticles (AuNPs) and cross-linked at the surface of gold interdigitated microelectrodes using glutaraldehyde vapor. Under optimal conditions (35 min cross-linking time, working pH of 7 and temperature of 25◦C), the biosensor response was linear up to 60 nM OTA and the limit of detection was 1 nM. This value was 700 times lower than the detection limit obtained using the more classical method based on enzyme cross-linking in the presence of bovine serum albumin (BSA). PVA/PEI hydrogel creates a very favorable aqueous environment for the enzyme. In addition, interactions between protonated amino groups of PEI and negative charges of both citrated AuNPs and thermolysin improve their dispersion in the polymer blend, favoring enzyme stabilization and accessibility to the substrate (OTA). The developed OTA biosensor was very reproducible and stable over a 30 days period when stored at 4◦C in 20 mM phosphate buffer between two measurements. The method was further evaluated using commercial doped olive oil samples. No pretreatment of the sample was needed for testing and no matrix effect was observed. Recovery values were close to 100%, demonstrating the suitability of the proposed method for OTA screening in olive oil

Les biocapteurs sont des moyens d’analyse en plein essor à la fois rapides, sélectifs et peu coûteux applicables à des domaines extrêmement variés (environnement, santé, agroalimentaire,…). Dans ce type d’outil, un élément sensible de nature biologique (anticorps, enzyme, microorganisme, ADN…) doté d’un pouvoir de reconnaissance pour un analyte ou un groupe d’analytes est associé à un transducteur pouvant être de type électrochimique, optique ou thermique. Dans ce travail, nous nous sommes intéressés au développement de différents biocapteurs se basant sur l'immobilisation d'enzymes ou de bactéries sur des microélectrodes en vue d’une détection électrochimique. Nous avons montré les potentialités d’application de deux biocapteurs conductimétriques à base de protéinase K ou de protéinase K et de pronase à la détection des modifications de conformation de la myoglobine et de l’albumine de sérum bovin au cours de leur relargage à partir de microsphères de poly (ε-caprolactone). Nous avons également mis au point un biocapteur conductimétrique à base de catalase et d’alcool oxydase pour une détection rapide et sensible des alcools ainsi que deux biocapteurs à catalase pour la détection impédimétrique et conductimétrique du cyanure et l’étude des interactions catalase-cyanure. Nous avons enfin élaboré des biocapteurs bactériens à base de Pseudomonas putida F1 pour la détection du trichloroéthylène dans les eaux souterraines. Pour cela, une voie originale d’immobilisation des cellules, basée sur la fonctionnalisation du transducteur à l’aide de couches autoassemblées et d’anticorps, ainsi que l’utilisation de nanotubes de carbone, a été explorée<br>The development of biosensors is an expanding research area. Indeed, biosensors are rapid, selective and cost-effective analytical tools which find applications in various fields (environment, health, food,…). They are constituted of a sensitive biological element (antibody, enzyme, microorganism, DNA…), which can selectively recognize one analyte or a group of analytes, associated to an electrochemical, optical or thermal transducer. In this work, we developed different biosensors based on enzymes or bacteria immobilised onto microelectrodes in view of electrochemical detection. First, we demonstrated the potentialities of two conductometric biosensors based on proteinase K or proteinase K and pronase for the detection of myoglobin and bovine serum albumine conformation changes during their release from poly (ε-caprolactone) microspheres. Then, we elaborated a bi-enzymatic conductometric biosensor with catalase and alcohol oxidase as sensing elements, for a rapid and sensitive detection of alcohols. Catalase impedimetric and conductometric biosensors were also developed for cyanide detection and used for the study of catalase-cyanide interactions. Finally, we prepared Pseudomonas putida F1 whole cell biosensors for the determination of trichloroethylene in groundwaters. For that, an original route, including the functionalisation of the transducer with a self-assembled-monolayer and antibodies, and the use of single-wall carbon nanotubes, was investigated for cell immobilisation

The thesis deals with the influence of low-flammable electrolytes on negative electrodes. The thesis describes materials used in lithium-ion batteries and functions of individual components. There is also a description of conductometry and electron microscopy, which is used in the practical part, ie during measurement. All findings are summarized at the end of the thesis.

Lorsque des déchets nucléaires irradiants sont conditionnés en matrice cimentaire, l’eau contenue dans la solution porale et dans les hydrates peut être radiolysée, conduisant notamment à la production de dihydrogène. Dans le cas de déchets fortement irradiants, la maitrise de ce terme source hydrogène dans un site d’entreposage et/ou de stockage peut constituer un enjeu de sûreté. Ce terme source hydrogène peut-être limité en diminuant la quantité d’eau mise en œuvre pour élaborer les matrices cimentaires de conditionnement, ou en choisissant un liant cimentaire dont les produits d’hydratation présentent un faible rendement de production radiolytique de dihydrogène. De ce point de vue, les ciments alumineux pourraient présenter un intérêt significatif par rapport aux ciments silico-calciques. En effet, l’hydratation des ciments alumineux conduit à des assemblages minéralogiques dont les hydrates présentent une bonne stabilité sous irradiation. Toutefois, la vitesse d’hydratation de ces ciments est parfois élevée et incompatible avec les contraintes d’un atelier de cimentation industriel. Il convient donc de mieux comprendre les mécanismes d’hydratation de ces phases pour éventuellement mieux les contrôler.Dans le cadre de ce travail, le déroulement de l’hydratation de quatre aluminates de calcium anhydres synthétiques, se distinguant l’un de l’autre par leur rapport C/A, a été étudié. En particulier, ont été examiné, leur vitesse d’hydratation, leur degré d’hydratation et l’assemblage minéralogique formé. Les suivis d’hydratation ont été réalisés par microcalorimétrie isotherme et conductimétrie quand les phases ont été caractérisées par analyse thermogravimétrique, par diffraction des rayons-x et par résonance magnétique du solide. Toutes les expériences ont été réalisées à 25 °C. Les résultats du suivi de l’hydratation de pâtes de ciment et de suspensions cimentaires nous ont permis de conclure que les vitesses d’hydratation sont d’autant plus grandes que le rapport C/A de l’anhydre considéré est élevé. De plus, l’étude de l’hydratation de ces phases anhydres en suspension a permis d’identifier les chemins réactionnels suivis par chacun des systèmes étudiés. Notamment, il a été démontré que la formation d'hydroxyde d'aluminium limite la cinétique d'hydratation des phases anhydres dont le rapport C/A est inférieur ou égal à 1. Les résultats obtenus dans le cadre de ce travail pourront permettre à terme d’orienter le choix du ciment alumineux à mettre en œuvre pour le conditionnement de déchets irradiants<br>This Ph-D project takes place in the framework of nuclear waste conditioning in cementitious matrices. When an irradiating nuclear waste is stabilized and solidified in a cementitious matrix, the radiolysis of water molecules from the pore solution and from the hydrates themselves yields dihydrogen. In the case of highly irradiating wastes, the release of dihydrogen raises safety issues for storage and/or disposal facilities. The release of hydrogen gas by radiolysis can be limited by reducing the amount of water used for the elaboration of the cement or by choosing a cement binder with hydrates showing a good stability under irradiation. As far as radiolysis is concerned, calcium aluminate-based cements are of significant interest in comparison to calcium silicate cements. The hydration of calcium aluminate cements leads to mineralogical assemblages with a low radiolytic yield of dihydrogen. However, the hydration of these cements is sometimes too fast and incompatible with the industrial process requirements. The objective of this thesis is thus to better understand the underlying mechanisms of the hydration of the calcium aluminates present in calcium aluminate-based cements.Specifically, the course of hydration of four synthetic anhydrous calcium aluminates, varying one from each other by their C/A ratio, is studied at 25°C from the point of view of their hydration rate, their degree of hydration and the resulting mineralogical assemblages by a combination of isothermal calorimetry, thermogravimetric analysis, x-ray diffraction and solid-state nuclear magnetic resonance. Monitoring the hydration by isothermal calorimetry in pastes and by conductimetry in suspensions show that the higher the C/A ratio of the considered anhydrous phase, the higher the hydration rate. Finally, studying the hydration of each of these phases in suspension makes it possible to point out the reaction path followed by each studied system. This work also demonstrated that aluminium hydroxide formation limits the kinetics of hydration of anhydrous phases with a C/A ratio lower than or equal to 1. The results obtained in the framework of this thesis can help optimizing the design of a calcium aluminate cement-based matrix to be used for the conditioning of irradiating wastes

Les phénomènes de transport constituent en eux seuls un vaste domaine d'étude qui se veut indispensable dans la compréhension des comportements des réacteurs électrochimiques et polyphasiques. Le but de ce travail a consisté à la mise en œuvre de deux différentes méthodes de détermination du coefficient de diffusion, qu'il a fallu ensuite confronter afin d'établir un quelconque lien entre elles ; nous avons de ce fait mis en œuvre la première méthode dite classique, largement utilisée en génie chimique. Elle décrit les phénomènes de manière très simple, mais demeure toutefois limitée car elle présente une inexactitude en toute rigueur ; le fait que la loi de Levich ne s'applique que dans le cas de solution diluée en est une illustration. Nous avons ensuite mis en œuvre la méthode conductimétrique qui est par contre la plus rigoureuse sur l'interprétation de l'intégralité des signaux, permettant donc de suivre des phénomènes de diffusion plus complexes et ainsi de quantifier des interactions mutuelles par le biais des coefficients de diffusion croisés. Toutefois, la restriction de son application sur certains cas spécifiques, notamment sur la limitation du domaine de concentration étudiée, en raison de la certaine saturation des sondes, fait peser en elle une faiblesse. Pourtant, la confrontation des deux méthodes a permis de constater une cohérence entre elles, et les résultats obtenus montrent que les deux méthodes ont été utilisées avec succès dans la détermination du coefficient de diffusion

Thesis (Ph.D.)--University of Missouri-Columbia, 2007.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on March 24, 2009) Vita. Includes bibliographical references.

Arsenic is found in the environment in several oxidation states as well as in a variety of organoarsenic compounds. This situation puts additional demands on the analysis in that it is desirable to measure the amount of each species, not just all of the arsenic. The reason for this is that the different species have greatly different toxicities; of the major inorganic forms, As(III) is much more toxic than As(V). The goal of this research was to develop a convenient method for the analysis of mixtures of As(III) and As(V) at trace levels. Electroanalytical methods are inherently sensitive to oxidation states of elements and therefore are a natural choice for this problem. In fact, a method was developed some years ago for As(III) that used differential pulse polarography: the detection limit is 0.3 parts per billion (ppb). However, As(V) was not detected since in its usual form as an oxyanion it is electrochemically inactive. There are coordinate compounds formed with catechol, AsL(,n)(n = 1-3), that can be reduced at a mercury electrode, but the active species, AsL, is only a small fraction of the major species, AsL(,3), so the detection limit is only 500 ppb. Many details of the electrochemistry of this unusual compound were examined in this work. In order to improve detection limits, a method involving cathodic stripping was developed. It involves codeposition of copper with arsenic on a mercury electrode to effectively concentrate the analyte. Then the elemental arsenic is converted to arsine, AsH(,3), during a cathodic potential scan. The resulting current peak is proportional to As(III) in the absence of catechol and to the sum of As(III) and As(V) in the presence of catechol. It was observed that the current peak was considerably larger than expected and additional experiments revealed that there was evolution of hydrogen during the formation of arsine. This is rather unusual in electrochemical reactions and so some of the details of this catalyzed coreaction were examined. The result is a fortunate enhancement of detection limit so that As(v) at 40 ppb can be measured.

The method of enzyme adsorption on nano- and microsized zeolites, developed by us, is described. It is notable by such advantages as simple and fast performance, the absence of toxic compounds, high reproducibility and repeatability. The biosensor based on the method developed was applied for urea measurement in samples of blood serum. It was shown that the biosensor could surely distinguish healthy people from people with renal dysfunction. Good results reproducibility was proved at urea determination in real samples of blood serum (RSD = 10%). For these reasons, the biosensors based on enzyme adsorption are more suitable for standardization and production than those based on conventional methods of immobilization. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35478

In this thesis, the author proposed and developed nanostructured materials based Surface Acoustic Wave (SAW) and conductometric transducers for gas sensing applications. The device fabrication, nanostructured materials synthesis and characterization, as well as their gas sensing performance have been undertaken. The investigated structures are based on two structures: lithium niobate (LiNbO3) and lithium tantalate (LiTaO3). These two substrates were chosen for their high electromechanical coupling coefficient. The conductometric structure is based on langasite (LGS) substrate. LGS was selected because it does not exhibit any phase transition up to its melting point (1470°C). Four types of nanostructured materials were investigated as gas sensing layers, they are: polyaniline, polyvinylpyrrolidone (PVP), graphene and antimony oxide (Sb2O3). The developed nanostructured materials based sensors have high surface to volume ratio, resulting in high sensitivity towards di¤erent gas species. Several synthesis methods were conducted to deposit nanostructured materials on the whole area of SAW based and conductometric transducers. Electropolymerization method was used to synthesize and deposit polyaniline nanofibers on 36° YX LiTaO3 and 64° YX LiNbO3 SAW substrates. By varying several parameters during electropolymerization, the effect on gas sensing properties were investigated. The author also extended her research to successfully develop polyaniline/inorganic nanocomposites based SAW structures for room temperature gas sensing applications. Via electrospinning method, PVP fibres and its composites were successfully deposited on 36° YX LiTaO3 SAW transducers. Again in this method, the author varied several parameters of electrospinning such as distance and concentration, and investigated the effect on gas sensing performance. Graphene-like nano-sheets were synthesized on 36° YX LiTaO3 SAW devices. This material was synthesized by spin-coating graphite oxide (GO) on the substrate and then exposin g the GO to hydrazine to reduce it to graphene. X-ray photoelectron spectroscopy (XPS) and Raman characterizations showed that the reduced GO was not an ideal graphene. This information was required to understand the properties of the deposited graphene and link its properties to the gas sensing properties. Thermal evaporation method was used to grow Sb2O3 nanostructures on LGS conductometric transducers. Using this method, different nanoscale structures such as nanorods and lobe-like shapes were found on the gold interdigitated transducers (IDTs) and LGS substrate. The gas sensing performance of the deposited nanostructured Sb2O3 based LGS conductometric sensors was investigated at elevated temperatures. The gas sensing performance of the investigated nanostructured materials/SAW and conductometric structures provide a way for further investigation to future commerciallization of these types of sensors.

Low dimensional semiconductors are promising materials with diverse range of applications in a variety of fields. Specifically, in recent times low dimensional oxide and sulfide based semiconductors are regarded as materials that can have potential applications in chemical gas sensor, optoelectronic devices and memristor. How ever, in some cases it is envisioned that appropriate doping as well as phase stabilization is important in enhancing their material properties. This work presents the synthesis, characterization and application of various (pristine and doped) quasi-one dimensional metal oxides (TiO2, VO2) and two-dimensional materials (CuO thin film, MoS2). Some practical protocols for stabilization of specific phases at ambient conditions via a new method of doping in VO2 nanostructures with aluminum, is demonstrated. Similarly, a temperature-doping level phase diagram for the free-standing nanostructures in the temperature range close to the ambient conditions was presented. TiO2 nanowire was doped during growth and electrical measurements on individual TiO2 single crystal nanowires indicate that light in visible range can induce electron-hole pair formation. Furthermore, gas sensing (CO, H2) measurements taken under visible light irradiation imply that photo-activated chemical oxidization on the surface of TiO2 nanowires occurs, which is responsible for the observed measurements. Further, the effect of self heating in some nanostructures was also explored. Since self-heating is a prospective power-efficient energy delivery channel to the conductometric chemical sensors that require elevated temperatures for their operation, the unprecedentedly low power consumption can be achieved via minimizing the heat dissipation in the optimized device architecture. By investigating the heat dissipation in these devices we show that the thermal, electrical and chemical properties of the self-heated semiconducting nanowires appear to be strongly coupled with each other at nanoscale. This opens up unique opportunity to fabricate low power nanoscopic sensing leading to an ultra-small and power efficient single nanostructure gas recognition system. The CuO film based lateral devices were fabricated and studied for its resistive switching behavior. A good, stable and reproducible threshold RS performance of CuO film was obtained by electrical measurement. Finally, the micro-flake MoS2 based FET photoelectronic device was fabricated (using mechanically exfoliated MoS2) and its electronic and photoelectronic properties were investigated. We show that though the FET mobility values of MoS2 microflake is in the average range, but the photo-responsivity is much higher compared to most of others similar sulfide based 2D layered materials.

Zeolites are crystalline aluminosilicates which have highly ordered pore structures and high surface area. Also the tailorable surface properties, high ion-exchange capability, high chemical, thermal, and mechanical strength make these particles an important candidate for various application such as sensors, catalysis, dielectric materials, separation, and membrane technologies. Although zeolites have these unique properties, applications where zeolites are integrated into devices according to their application areas, are limited due to the powder form of the material. The purpose of the current study was to investigate the effect of zeolite nanoparticles on conductometric biosensor performance and cell viability measurements. Firstly, zeolite attachment on silicon surfaces was investigated by attaching silicalite and zeolite A nanoparticles onto the silicon substrates by direct attachment methodology in a closely packed monolayer form with perfect orientation and full coverage without using any chemical linker. Furthermore, the ability to pattern these zeolite crystals on silicon substrates with electron beam lithography and photolithography techniques was investigated. With the combination of electron beam lithography and direct attachment methodology, zeolite patterns were produced with feature sizes as small as a single silicalite nanoparticle thick line, that is approximately 500 nm. This approach has the ability of patterning very small features on silicon substrate, but the drawback is the long patterning time and lack of electron beam stability during long pattern formation process. Accordingly, it is almost impossible to form large patterns with electron beam lithography systems. Afterwards, to have full control on surfaces with differentiated areas on solid substrates, patterns of one type of zeolite crystals was formed on the monolayer of another type of zeolite layer with electron beam lithography for the first time. The same closed packed and highly oriented silicalite patterns were successfully formed on zeolite A monolayers and vice versa. Then photolithography technique was combined with direct attachment methodology to overcome the problem of the lack of total patterned area. With this technique, it was possible to pattern the whole silicon wafer in a couple of seconds, however the feature size of the zeolite patterns was limited with the infrastructures of the mask fabricated for photolithography studies. In this particular study, zeolite lines patterns with a minimum of 5 &micro<br>m thickness were prepared and the total patterned area was kept constant at 1 cm2. Similar to what was obtained by electron beam lithography study, zeolite A patterns were formed on silicalite monolayers with the minimum feature size of 5 &micro<br>m and vice versa. In the second part of the study, zeolite films were prepared on the transducers of conductometric biosensors using dip coating technique and named as Zeolite Coated Transducers (ZCT). Electrodes prepared using a mixture of zeolite and enzyme solution and then subjected to casting using glutaraldehyde were called Zeolite Membrane Transducers (ZMT). The operational and storage stabilities were determined to be in an acceptable range using ZCTs for conductometric urea biosensors. It was observed that using electrodes fabricated by the ZCT technique enhanced the biosensor signals up to two times and showed a rapid response after the addition of urea to the medium when it was compared with Standard Membrane Transducers (SMT). This enhancement can be explained by the lack of GA layer on top of the film, which acts as a diffusion barrier and inhibits the activity of the enzyme. On the second part of this conductometric biosensor study, effect of zeolite modification with methyl viologen (MV) and silver nanoparticles (Ag+ and Ag0), as well as the effect of changing Si/Al ratio was investigated with three different zeolite Beta particles which have Si/Al ratios of 40, 50, and 60. There were no significant effect of MV modification on ZMTs and there was no response observed with Ag+ and Ag0 modified zeolites. However, it was observed that conductometric responses increased with increasing Si/Al ratio for ZMTs. This behavior can be due to an increased hydrophobicity and/or the increasing acidic strength with the increasing Si/Al ratio within the zeolite crystals. Also ZCTs showed higher responses with respect to both SMTs and ZMTs. When compared with SMTs and ZMTs, ZCTs had higher reproducibility due to the controlled thickness of zeolite thin film by dip coating, and the controlled amount of enzyme adsorbed on this film. In the third part of the study, effect of zeolites on cell proliferation with MG63 osteoblast cells and NIH3T3 fibroblast cells were investigated. For that purpose, zeolite A, silicalite, and calcined forms of these zeolites were patterned with photolithography technique onto silicon wafers. Three different patterns prepared for this particular study, which has 0.125cm2, 0.08825cm2, and 0.04167cm2 zeolite patterned areas on 1 cm2 samples. In that way, not only the zeolite type and effect of calcination of zeolites, but also the effect of zeolite amount on MG63 osteoblast cells and NIH3T3 fibroblast cells were investigated. Silicalite coated samples were observed to have higher amount of cells than zeolite A coated samples after 24, 48, and 72 hours of incubation. This may be referred to the hydrophilic/hydrophobic properties, surface charge, and/or particle size of zeolites. Also it is observed that higher zeolite amount on samples resulted in an increase in the number of cells attached to the samples. There was also a significant increase in the number of cells upon using calcined silicalite samples. Accordingly, it can be hypothesized that zeolite pores result in an enhancement of protein adsorption and proliferation, even if this only occurs at the pore openings. On the other hand, there was no positive effect of calcining zeolite A. This result was expected since there is no structure directing agent used in synthesis procedure of zeolite A, which again supports the fact that pores might have some role in cell attachment.

The literature review indicates that studies on the structures and properties of perovskites materials have shown attractive applications in the fields of energy, catalysts and sensing materials for fuel cell and sensing industries. Kinetic phenomena in thin film systems, such as solid state amorphization and interface reactions due to diffusion during thin film deposition, are introduced indicating that thermal stability is a concern in thin film sensor device application. The principle of traditional methods of materials characterization is briefly discussed. Emphasis is placed on the functions of analytical transmission electron microscopy.<br>The SrFeO3/SiO2/Si and SrFeO3/Al 2O3 thin film systems have been studied using transmission electron microscopy. The thin films of SrFeO3 were grown by pulsed laser deposition. For the SrFeO3/SiO2/Si system, TEM characterization showed that the microstructure of the film deposited at room temperature contained crystalline and amorphous layers. Silicon diffusion into SrFeO3 films occurred at the SiO2 interface. The silicon-induced interfacial reactions resulted in phase transformations and the growth of complex crystalline and amorphous phases. The principal compositions of these phases were Sr(Fe,Si)12O19, SrOx and amorphous [Sr-Fe-Si-O].<br>The films in the SrFeO3/Al2O3 system were deposited onto single crystal and sintered polycrystalline Al2O 3 substrates at room temperature and 700&deg;C and subjected to annealing for various periods of time at 700-1000&deg;C. TEM characterization showed that the morphology of the film varied with changes in deposition temperature: a columnar structure was produced at room temperature and layers containing crystalline grains were produced at 700&deg;C. The interfacial structures of the films remained unchanged below 700&deg;C. Interfacial reactions were observed following annealing at 850&deg;C for 5 hours. The phase transformation at the interface was characterized for the film annealed at 1000&deg;C for 5 hours, for which the principal phases were identified as SrAl2-xFe xO4 and SrFe12-yAlyO19. As a result, an isothermal section at 1000&deg;C of a ternary phase diagram for SrO-Al2O3-Fe2O3 is proposed. Evaluation for thin film conductometric sensing applications indicated that the untreated films deposited at 700&deg;C onto both single crystal and sintered Al2O3 substrates exhibited a similar temperature dependency of conductivity in air and a p-type gas sensor response to oxygen and propane at 500&deg;C.

Este trabalho descreve o desenvolvimento de um biossensor contendo transdução condutométrica sem contato (C4D, capacitively coupled contactless conductivity detection) e ácido fólico (FA) como biorreceptor em microchip, uma nova alternativa que poderá ser utilizada na determinação do biomarcador tumoral FR-&alpha;. Essa espécie exibe interações com FA altamente específicas, com constantes de formação da ordem de 109-1010. Os dispositivos microfluídicos, os quais consistiram de uma lâmina de vidro (integrando os eletrodos), dielétrico (contendo a fase biossensora) e substrato de poli(dimetilsiloxano) (PDMS, incorporando os microcanais), foram fabricados utilizando-se processos de fotolitografia e deposição de filmes finos em fase vapor. Objetivando melhorias nos níveis de detecção da C4D, estudos de sensibilidade com base em parâmetros da curva analítica foram conduzidos alterando-se a natureza do dielétrico e a configuração dos eletrodos. Posteriormente, estudos de caracterização foram realizados para as superfícies modificadas com os intermediários de imobilização; condições reacionais distintas (reagente, concentração, solvente e tempo) foram consideradas. As técnicas de microscopia eletrônica de varredura e espectroscopia de fotoelétrons excitados por raios-X foram usadas, respectivamente, a fim de se verificar a possível formação de aglomerados e permitir determinações qualitativas e quantitativas sobre as composições químicas das superfícies. Como resultado dos experimentos de sensibilidade e caracterização de superfície, adotamos os parâmetros seguintes para os ensaios de interações biomoleculares posteriores: filme de SiO2 como dielétrico, eletrodos seletivos à C4D com formato retangular e orientação antiparalela e monocamadas automontadas do reagente 3-aminopropil(trietoxisilano) como intermediário de imobilização de FA. As duas etapas finais do trabalho foram: otimização do tempo de funcionalização com FA (3, 5 e 7 h) e caracterização da fase biossensora, realizada a partir de medidas de C4D e microscopia de força atômica (AFM). Para o primeiro caso, os microchips foram aplicados a um padrão de anticorpo monoclonal específico a FA (&alpha;-FA). Os ensaios biomoleculares indicaram uma adsorção efetiva de FA junto à superfície de SiO2 silanizada, sem a ocorrência (ao menos em níveis significativos) de impedimentos estéricos de sua espécie bioativa. Dentre os tempos de funcionalização investigados, 3 h foi aquele que resultou em uma maior sensibilidade do método. Em termos da etapa de caracterização eletroquímica da fase biossensora, seus resultados mostraram haver correlação entre a resposta analítica e as interações FA/&alpha;-FA. Em adição, conforme indicaram as medidas de AFM, não houve alterações drásticas na morfologia do substrato (SiO2) em função dos processos de modificação química de superfície. Por fim, o uso da C4D como uma técnica de transdução em biossensores mostrou-se uma alternativa promissora para a análise do biomarcador tumoral FR-&alpha;. Dentre outros aspectos, essa plataforma analítica requer uma instrumentação simples, barata e portátil, não apresenta inconvenientes relacionados ao contato eletrodo/solução, dispensa o uso de mediadores redox e permite a determinação simultânea de multianalitos. Neste ínterim, alterações no transdutor devem ser implementadas visando um aumento na sensibilidade do método, o qual representa seu fator limitante principal.<br>This work describes the development of a biosensor containing capacitively coupled contactless conductivity transduction (C4D) and folic acid (FA) as bioreceptor in microchip, a new alternative that can be used in FR-&alpha; tumor biomarker analysis. FR-&alpha; exhibits highly specific interactions with FA, showing formation constants of the order of 109-1010. The microfluidic devices consisted of a glass layer (integrating the electrodes), dielectric (containing the biosensor phase), and poly(dimetilsiloxane) substrate (PDMS, incorporating microchannel). The microfabrication stage evolved photolithography processes, metal adsorption via sputtering, and plasma-enhanced vapor film deposition. In order to improve detection levels of C4D, sensitivity studies were conducted by changing the dielectric nature and electrode configuration. Through flow analysis with given electrolyte standards, the limits of detection and quantification were calculated based on analytical curve parameters. Subsequently, researches were performed to characterize the modified surfaces with immobilization intermediate considering reaction conditions distinct (reagent, concentration, solvent, and time). The techniques of scanning electron microscopy and X-ray photoelectron spectroscopy were employed, respectively, aiming to verify the clusters formation and allow qualitative and quantitative determinations about the surfaces chemical composition. From the results of sensitivity experiments and surface characterization, we adopt the following parameters for the biomolecular interactions assays: SiO2 film as dielectric, C4D selective electrodes with rectangular shape and antiparallel orientation, and self-assembled monolayers of 3-aminopropyl(triethoxysilane) as intermediary for immobilization of FA. The two final steps of the work were: optimizing the FA functionalization time (3, 5, and 7 h) and phase biosensor characterization, made from measures of C4D and atomic force microscopy (AFM). For the first case, due to the absence of FR-&alpha; standard for purchase, the microchips were applied to FA specific monoclonal antibody (&alpha;-FA). The biomolecular assay indicated effective adsorption of FA, without occurrence (at least in significant levels) of steric hindrance of its bioactive specie. Among the investigated times of functionalization, 3 h resulted in a higher sensitivity of the method. In terms of biosensor phase electrochemical characterization stage, their results evidenced correlation between analytical response and FA/&alpha;-FA interactions. Additionally, as the AFM measurements showed, drastic changes in the morphology of the substrate (SiO2) with the surface modification processes did not occur. Finally, the use of the C4D as transduction technical in biosensors proved to be a promissory alternative for FR-&alpha; tumor biomarker analysis. Among other features, this platform has not drawbacks related to the electrode/solution contact, dispenses the use of redox mediators, allows the simultaneous determination of multianalytes, and employs an instrumentation that is simple, cheap, and portable. Nevertheless, changes in the transducer should be implemented to increase the method sensitivity, which represents its main limiting factor.

The state of the art NO₂ gas sensors suffer from a trade-off between sensitivity, reversibility, and selectivity. This thesis focuses to develop highly sensitive NO₂ gas sensors with superior selectivity based on layered molybdenum trioxide and its heterostructures. Through a combination of advanced materials synthesis and characterisation techniques, ultrasensitive NO₂ gas sensors based on different morphologies of molybdenum trioxide, including nanoribbons, large-sized single crystalline flake and heterostructures have been demonstrated. This thesis lays the foundation for developing a potential sensing platform based on molybdenum trioxide to enable monolithic, scalable and integrable sensing technologies.

El incremento del vertido de sustancias contaminantes al medio ambiente, debido al desarrollo industrial y los malos hábitos de consumo, han provocado la ruptura del equilibrio de muchos ecosistemas llegando afectar, en muchas ocasiones, a los humanos. Con el objetivo de controlar y disminuir estos efectos, los gobiernos han dirigido acciones para legislar y regular el vertido de sustancias tóxicas al medio. De esta manera el Gobierno Nacional de España ha financiado a nuestro grupo de investigación, el proyecto del Plan Nacional en Ciencia y Tecnología Química titulado “Desarrollo de métodos automáticos de análisis. Aplicación a planes de vigilancia ambiental”, con referencia CTQ 2010-15541. La presente tesis forma parte de este proyecto siendo su objetivo general el desarrollo de nuevos métodos automáticos para la determinación de especies químicas de interés ambiental. En la introducción de la tesis se realiza una revisión sobre la automatización del laboratorio químico mediante técnicas de análisis en flujo y se describen las dos utilizadas en esta tesis. Seguidamente se revisa la aplicación de estas técnicas a la automatización de los métodos electroquímicos, especialmente la conductimetría y la voltamperometría redisolución anódica. En el tercer apartado de la introducción se recogen los aportes de las técnicas de flujo en la automatización de procesos de tratamientos de muestras como la difusión gaseosa y la extracción líquido-líquido. De esta última técnica se resume su evolución histórica hasta los métodos más recientes descritos que logran la automatización total del proceso de extracción y que se pudieran clasificar dentro de la tercera generación de las técnicas en flujo. En el último apartado de la introducción se trata la automatización de métodos cinético-catalíticos mediante técnicas de análisis en flujo, destacando el elevado potencial que tienen estos métodos para el análisis de trazas y el bajo número de trabajos publicados donde se consigue la automatización de los mismos. Contenido de la investigación En esta tesis se han utilizado dos técnicas de análisis en flujo, el análisis por inyección en flujo multijeringa (MSFIA) y los sistemas en flujo multibombas (MPFS), acopladas a dos métodos de tratamiento de muestras, la difusión gaseosa y la extracción líquido-líquido, y tres técnicas de detección, la voltamperometría de redisolución anódica, la conductimetría y la espectrofotometría, para obtener cinco sistemas automáticos de análisis. Los sistemas desarrollados han sido aplicados a la determinación, fundamentalmente en agua de mar, de cinco analitos inorgánicos: cadmio, cromato, yoduro, amonio y carbono inorgánico total, en muestras ambientales. Durante el desarrollo de estos sistemas y el estudio de las técnicas utilizadas, se han solucionado problemas relacionados con la automatización de las técnicas en flujo, lo que ha mejorado significativamente las características analíticas de los métodos presentados en comparación con otros similares reportados en la literatura. Entre estas mejoras se encuentran por ejemplo el incremento de la reproducibilidad y sensibilidad de las determinaciones, la disminución de los volúmenes de reactivos y muestras utilizados, la reducción de las dimensiones del sistema y de los costes de la instrumentación, así como el aumento del grado de automatización del proceso analítico: tratamiento de la muestra, calibración y detección. Los trabajos presentados en esta tesis son los siguientes: 1- Un método simple, económico, portátil y automatizado mediante MSFIA que permite la determinación de cadmio mediante voltamperometria de redisolución anódica usando electrodos impresos con película de bismuto. (SPE- BiF-ASV- SFIA) 2- Un sistema automatizado mediante la técnica de MSFIA para la determinación de amonio en muestras de aguas naturales y marinas utilizando la difusión gaseosa y la detección conductimétrica. (C-GD-MSFIA) 3- Un analizador automático, basado en la técnica de MPFS, para la determinación de amonio y de carbono inorgánico total en muestras de aguas marinas usando difusión gaseosa y detección conductimétrica. (C-GD-MPFS) 4- Un sistema totalmente automatizado de microextraccion líquido-líquido dentro de la jeringa de una bureta automática para la determinación espectrofotométrica de cromo (VI) en muestras de aguas naturales. (In syringe-MSA-DLLME) 5- Un chip conductor de microfluidos para la automatización mediante MSFIA de un método cinético-catalíticos que permita el análisis de ioduro en agua de mar y fármacos con un consumo muy reducido de reactivos. (CHIP-MSFIA-Catalytic) Conclusiones Se han desarrollado nuevos sistemas automáticos para la determinación de analitos inorgánicos de interés ambiental. La utilización de técnicas de análisis en flujo multiconmutadas, como MSFIA y MPFS, han demostrado ser muy útiles en la automatización de sistemas de análisis que utilizan diferentes técnicas de detección (electroquímicas y espectrofotométricas), de pretratamiento de muestra y de métodos de determinación cinéticocatalíticos. Los sistemas desarrollados han demostrado su efectividad en la determinación de analitos inorgánicos (cadmio, cromato, yoduro, amonio y carbono inorgánico total) en muestras tan complejas como las aguas de mar, aguas residuales o preparados farmacéuticos. Bibliografía 1.Henríquez C, Laglera LM, Alpizar MJ, Calvo J, Arduini F, Cerdà V: Cadmium determination in natural water samples with an automatic multisyringe flow injection system coupled to a flow-through screen printed electrode. Talanta 2012, 96(0):140-146. 2.Henríquez C, Horstkotte B, Cerdá V: Conductimetric determination of ammonium by a multisyringe flow injection system applying gas diffusion Int J Environ Anal Chem 2012:1-17. 3.Henríquez C, Horstkotte B, Cerdá V: A highly reproducible and robust solenoid micropump system for the analysis of total inorganic carbon and ammonium using gas diffusion with conductometric detection. Talanta 2013, In review 4.Henríquez C, Horstkotte B, Solich P, Cerdá V: In-syringe magnetic stirring assisted liquid-liquid microextraction for spectrophotometric determination of Cr (VI) in waters. Analytical and Bioanalytical Chemistry 2013, Accepted/in press. 5.Abouhiat FZ, Henríquez C, Horstkotte B, El Yousfi F, Cerdà V: A miniaturized analyzer for the catalytic determination of iodide in seawater and pharmaceutical samples. Talanta 2013, 108(0):92-102.<br>Introducción The increasing discharge of pollutants into the environment due to the industrial development and consumer habits have caused the increasing unbalance of many ecosystems, already affecting in many occasions human species itself. In order to control and reduce these effects, many governments have initiated actions to control the discharge of toxic substances into the environment. In this way, the Spanish Government has funded, to our research group, the project of the National Science and Technology Chemistry entitled “Development of automated methods of analysis. Application to environmental monitoring plans”, with reference CTQ 2010- 15541. This PhD thesis is part of this overall project with the main objective of the development of new automated methods for the determination of some chemical species of environmental interest. In the first part of the introduction of this thesis, the automation of different procedures in a chemical laboratory by the use of flow techniques is reviewed and the two selected flow techniques are described. In the second section, the application of these techniques in the automation of electrochemical methods, especially conductometry and anodic stripping voltammetry, is reviewed. In the third section of the introduction, the contributions of flow techniques to the automation sample pretreatment are discussed, especially for gaseous diffusion and liquid-liquid extraction. Moreover, it was reviewed the historical evolution and the most recent reported methods to achieve the full automation of liquid-liquid extraction inside the syringe, which could be classified as the third generation of flow techniques. The last part of the introduction deals with the automation of kinetic-catalytic methods using flow techniques, emphasizing the high potential of these methods for trace analysis and the low number of published papers on this subject. Research content. In this thesis, two flow techniques, MSFIA and MPFS, coupled to two sample pretreatment methods, gas diffusion and liquid-liquid extraction, and three detection techniques, anodic stripping voltammetry, conductometry and spectrophotometry, have been used to develop five automatic analytical systems. These systems have been applied to the determination of five inorganic analytes: cadmium, chromate, iodide, ammonium, and total inorganic carbon and applied to different environmental water samples with main focus on seawater. Involved in the development of these systems were the study of the used techniques and the finding of solutions for the problems related to the automation using flow techniques. Significant improvements of the analytical characteristics of the presented methods in comparison with similar ones reported in the literature are obtained. These improvement were an increase of the reproducibility and sensitivity of measurement, the decrease of reagent and sample consumption, the reduction of the analyzers’ sizes and instrumentation costs, and further, an increase of the automation degree of the analytical procedure, including: sample pretreatment, calibration and detection. The presented contributions are listed below: 1- A simple, economic, automated, and portable analyzer system based on MSFIA, which allows the determination of cadmium with anodic stripping voltammetry using a bismuth film coated screen printed electrode. (SPE-BiF-MSFIA) 2- An automatic MSFIA system for the determination of ammonium in naturals and seawaters in a very wide concentration range using gas diffusion and conductometric detection. (C-GD-MSFIA) 3- An automated and highly reproducible analyzer based on MPFS for the determination of total inorganic carbon and ammonium in seawaters using gas diffusion and conductometric detection. (C-GD-MPFS) 4- A fully automated in-syringe magnetic stirred-assisted dispersive liquid-liquid microextraction system for the spectrophotometric determination of chromate in natural waters. (In syringe-MSA-DLLME) 5- A microfluidic “Chip” conductor to be used in combination with MSFIA for the automated quantification of iodide in seawaters and pharmaceutical preparations using a kinetic-catalytic method characterized by a very low reagent and sample consumption. (CHIP-MSFIA-Catalytic) Conclusions Five new systems have been developed for the automatic determination of inorganic analytes of environmental interest. The use of the multi-commutated flow techniques MSFIA and MPFS has proven to be very useful for the automation of the analytical systems, coupling to different detection techniques, as well as sample pretreatment and kinetic-catalytic determinations. The developed systems have been confirmed to be efficient for the determination of inorganic analytes in complex sample matrices such as seawater, wastewater, or pharmaceutical preparations.

Chemical components in wood contain multiple anionic groups, including carboxyl groups and hydroxyl groups. During kraft cooking and bleaching, such structures are also formed, degraded or modified by the action of reactions both deliberate and unwanted. It has previously been found by Laine that anionic groups with pKa values of 3.3 and 5.5 can explain the observed anionic charge on chemical fibres, corresponding to carboxylic acids on hemicelluloses as well as oxidized lignin structures, respectively. It has further been found that most of the fibre charge can be accounted for through the contribution from methylglucuronic acids as well as hexenuronic acids. This study aimed to provide additional information regarding the charge component unaffiliated with either of the aforementioned uronic acids by studying kraft pulps procured from an industrial kraft mill corresponding to unit operations through a fibreline using the ODHot(EOP)D1D2 bleaching sequence. Each sample had its total charge determined by means of conductometric titration, its content of methylglucuronic acid determined by means of methanolysis followed by GC, and its content of hexenuronic acids determined by means of the HUT-method for the determination of hexenuronic acids, followed by either UV absorbance measurements or calculations based on the reduction in kappa number during the selective acid hydrolysis. The lignin content was determined by means of kappa number analysis as well as by calculations based on the kappa number after selective acid hydrolysis, which was assumed to be characteristic of the kappa number addition from the lignin content of the samples. The hexenuronic acid content was successfully determined according to the HUT-method. A difference in content was observed when results for the unbleached and oxygen delignified samples that was obtained from UV measurements were compared with the observed difference in kappa number prior and after selective acid hydrolysis for said samples. In both cases, the results based on the difference in kappa number was higher. No correlation between remaining charge and lignin content could be made. It was instead observed that individual bleaching steps had binary effects on each of the analysed components of the fibre charge. A significant increase in charge unaffiliated with methylglucuronic acid or hexenuronic acid was observed during the EOP step, indicating an oxidation of chemical structures in the pulp: this effect could not be correlated to lignin content.<br>Kemisk massa kan ses som ett kompositmaterial bestående av cellulosa, hemicellulosa och lignin. Dessa beståndsdelar, liksom separata lågmolekylära föreningar, innehåller anjoniska kemiska grupper som bidrar till att ge träfibrer en anjonisk laddning. Ytterligare sådana grupper kan bildas under reaktioner vid kokning och blekning, tillika kan sådana grupper modifieras eller brytas ner. Laine har tidigare visat att fiberladdningen kan förklaras genom två skilda kategorier av kemiska grupper med pKa värden på 3,3 samt 5,5, vilka kan kopplas till karboxylsyragrupper på hemicellulosor respektive till lignin. Man har därtill funnit att stora delar av fiberladdningen kan förklaras genom tillskott från de två uronsyrorna metylglukuronsyra och hexenuronsyra. Denna studie syftar till att undersöka det laddningstillskott som inte kan länkas till någon av dessa två uronsyror. Detta har gjorts genom att studera kemiska massor från industrin, tagna från de olika stegen i en bleksekvens av typen ODHot(EOP)D1D2. Massornas totalladdning mättes medelst konduktometrisk titrering, emedan metylglukuronsyrahalten mättes via methanolysis följt av GC och hexenuronsyrahalten mättes via selektiv syrahydrolys per HUT-metoden följt av UV-karakterisering respektive beräkningar baserade på differensen i kappa tal före och efter sagda hydrolys. Ligninhalten i samtliga prov mättes via kappatalsmätningar samt genom beräkningar baserade på kappatalet efter selektiv syrahydrolys, vilket anses vara kappatalsbidraget från ligninföreningarna. Hexenuronsyrahalterna uppmätta medelst UV-karakterisering respektive kappatalsdifferens jämfördes mot varandra och fanns ge olika resultat för de oblekta och syrgasdelignifierade massorna. I bägge fallen gav mätningen baserade på kappatalsdifferens högre utslag. Ingen korrelation mellan kvarvarande laddning - totalladdning minus tillskottet från uronsyrorna - och ligninhalt kunde observeras. Istället observerades binära effekter för varje uppmätt komponent under vardera blekningssteg. Under EOP-steget observerades ett tillskott till den kvarvarande laddningen, vilket skulle kunna förklaras genom oxidation av trästrukturer. Dock kan ej heller detta relateras till ligninhalten i proverna.

Diploma thesis introduces the problems of electromigration, fluxes and flux residues. It includes a proposal for methods of measuring surface insulation resistance, information about selected types of fluxes and conformal coatings. It focuses on the influence of temperature, humidity. There are applied conductometric method and method of measuring SIR by IPC-25-B. The thesis describes the practical measurement of SIR and ionic contamination of PCB covered with flux and influence of RH, temperature and applied voltage is evaluated and discussed.

Розроблено інформаційно-вимірювальну систему для визначення неоднорідності композитних матеріалів кондуктометричним методом. В даному дипломі було проведено аналіз типових конструкцій пристроїв вимірювання неоднорідності композитних матеріалів кондуктометричним методом. Для виконавчих механізмів, що забезпечують роботу системи, приведені конструктивний розрахунок і опис принципу роботи. Здійснено аналіз похибок вимірювальних каналів і вибрані допустимі значення параметрів і режимів роботи. Розроблено технологічний процес виготовлення однієї з деталей розробленого об’єкту. Зроблено опис мережі Петрі як математичного апарату дослідження інформаційних процесів. Також у даній роботі проведено опис роботи та аналіз схеми електричної принципової та зроблено розрахунок номіналів елементів.<br>An information-measuring system for determining the inhomogeneity of composite materials by the conductometric method has been developed. In this diploma the analysis of typical designs of devices of measurement of inhomogeneity of composite materials by a conductometric method was carried out. For the executive mechanisms that ensure the operation of the system, a constructive calculation and description of the principle of operation was provided. The analysis of errors of measuring channels is carried out and admissible values of parameters and operating modes are chosen. The technological process of manufacturing one of the parts of the developed object has been developed. A description of the Petri net as a mathematical apparatus for the study of information processes. Also in this work the description of work and the analysis of the scheme of electric basic and the calculation of denominations of elements is made.<br>ЗМІСТ ВСТУП 1 АНАЛІТИЧНА ЧАСТИНА 1.1 Аналіз обєкту контролю і постановка задачі досліджень 1.2 Опис роботи приладу 2 ОСНОВНА ЧАСТИНА 2.1 Вибір і розрахунок основних параметрів транспортуючого вузла пристрою 2.2 Вибір і характеристика вузлів, які необхідні для включення пневмоциліндрів 2.3 Розрахунок крокових двигунів 2.4 Розрахунок передачі гвинт-гайка 2.5 Повірка установки 3 НАУКОВО-ДОСЛІДНА ЧАСТИНА 3.1 Мережа Петрі як математичний апарат дослідження інформаційних процесів 3.2 Мережі Petry як засіб моделювання систем і процесів. 3.3 Мережа Петрі, яка відтворює процес повірки композиту 4 СПЕЦІАЛЬНА ЧАСТИНА 4.1 Опис роботи приладу 4.2 Розробка принципової схеми 4.2.1 Підрахунок мінімальної кількості виводів мікроконтролера 4.2.2 Вибір мікроконтролера 4.2.3 Будова контролера 4.2.4 Вибір дисплея 4.3 Розрахунок номіналів елементів 4.4 Метрологічний аналіз та бюджет похибок вимірювального каналу 4.5 Опис алгоритму роботи 5.1 ОХОРОНА ПРАЦІ 5.1.1 Вимоги до виробничого освітлення 5.1.2 Характеристика небезпечних зон обладнання 5.2 Безпеки в надзвичайних ситуаціях ЗАГАЛЬНІ ВИСНОВКИ ДО КВАЛІФІКАЦІЙНОЇ РОБОТИ ПЕРЕЛІК ПОСИЛАНЬ ДОДАТКИ

Planar two-dimensional (2-D) nanostructured indium oxide (InOx) and one-dimensional (1-D) tin oxide (SnO2) semiconductor metal-oxide layers have been utilised for gas sensing applications. Novel layered Surface Acoustic Wave (SAW) based sensors were developed consisting of InOx/SiOxNy/36°YXLiTaO3, InOx/SiNx/SiO2/36°YXLiTaO3 and InOx/SiNx/36°YXLiTaO3 The 1 µm intermediate layers of silicon oxynitride (SiOxNy), silicon nitride (SiNx) and SiO2/SiNx matrix were deposited on lithium tantalate (36°YXLiTaO3) substrates by r.f. magnetron sputtering, electron-beam evaporation and plasma enhanced chemical vapour deposition (PECVD) techniques, respectively. As a gas sensitive layer, a 100 nm thin layer of InOx was deposited on the intermediate layers by r.f. magnetron sputtering. The targeted gases were ozone (O3) and hydrogen (H2). An intermediate layer has multiple functions: protective role for the interdigital transducers' electrodes as well as an isolating effect from InOx sensing layer, thereby improving the sensor performance. The developed SAW sensors' exhibited high response magnitudes with repeatable, reversible and stable responses towards O3 and H2. They are capable of sensing concentrations as low as 20 parts-per-billion for O3 and 600 parts-per-million for H2. Additionally a conductometric type novel sensing structure of SnO2/36°YX LiTaO3 was also developed by depositing a thin layer of SnO2 nanorods by PECVD. The gas sensing performance exhibited repeatable, reversible, stable responses towards NO2 and CO. The surface morphology, crystalline structure and preferred orientation of the deposited layers were investigated by Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). A polycrystalline, oxygen deficient non-stoichiometric InOx with grain sizes of 20-40 nm was revealed. The 1-D nanostructures were characterised by Transmission Electron Microscopy (TEM) showing nanorods with needle-like shape , diameters of 10-20 nm a t the top and 30-40 nm at the base as well as a preferential growth orientation of [ ] on the LiTaO3 substrate. The developed sensors are promising for O3, H2 and CO sensing.

O estudo da variação da composição atmosférica contribui para a compreensão dos efeitos das emissões antrópicas sobre a troposfera. A análise química da água de chuva assume importância neste contexto, uma vez que a precipitação úmida constitui um excelente meio de remoção de muitos poluentes da atmosfera. O aumento de acidez das chuvas, em várias partes do planeta, tem sido associado, predominantemente, à presença de ácidos fortes como o sulfúrico e nítrico, e ácidos orgânicos como acético e fórmico, originados pela oxidação de compostos de enxofre, nitrogênio e carbono, respectivamente. Dando continuidade a pesquisas anteriores sobre deposição úmida realizadas no IQ-USP, no presente trabalho buscou-se extrair mais informações de titulações potenciométricas e condutométricas de água de chuva, mediante aperfeiçoamento dos métodos de cálculo, com recursos quimiométricos modernos, de modo a complementar as medidas de pH e condutividade convencionais. As concentrações de espécies ácidas ou básicas nas amostras de água de chuva são da ordem de 10-5 mol L-1, muito abaixo das concentrações empregadas na prática cotidiana das titulações potenciométricas (tipicamente, no intervalo de 10-1 a 10-3 mol L-1). Dessa forma, propôs-se o uso de um método de regressão não linear (RNL) multiparamétrica, baseado no método de Levenberg-Marquardt, para a análise de dados potenciométricos (TP-RNL) após procedimento de transposição de coordenadas das curvas de titulação. Ao lado das determinações das concentrações dos analitos, pôde-se estimar ou refinar as constantes de protonação das bases de Brönsted presentes. Para tanto, procedeu-se ao ajuste por RNL das concentrações e/ou das constantes de protonação das bases presentes, de modo a minimizar o quadrado dos desvios entre os valores experimentais e os calculados em função do titulante adicionado, recorrendo a uma equação geral baseada no número médio de protonação de cada uma das bases. Ficou demonstrada a possibilidade de se determinar a soma de ácidos fortes completamente dissociados, soma de ácidos fracos com pK próximo a 4 (principalmente ácidos acético e fórmico), HCO3-/H2CO3 e a soma de bases fracas com pK ao redor de 9 (essencialmente NH3/NH4+). Durante as titulações, a facilidade em se coletar medidas de condutância simultaneamente às de pH levou a elaboração de um método sofisticado de análise de curvas de titulação condutométrica. Para tanto, desenvolveu-se uma equação de RNL baseada na contribuição das espécies em cada valor de pH e na condutância iônica medida (TC-RNL). A equação de TC-RNL é alimentada por dados de pH em função do titulante adicionado, oriundos de titulações potenciométricas. Dessa forma, foi possível caracterizar diretamente amônio e bicarbonato, além do conteúdo iônico total que não participa dos equilíbrios ácidos/base existentes no sistema. Adicionalmente, foi possível separar a contribuição do ácido acético da do fórmico, tarefa impossível por TP-RNL, ao menos nas baixas concentrações encontradas na chuva. Nas mesmas amostras de chuva tituladas foi procedida a análise por eletroforese capilar de zona com detecção condutométrica sem contato (CZE-CCD), conforme procedimento descrito na literatura, estimando-se os cátions e ânions majoritários. Num aperfeiçoamento do método para ânions, viabilizou-se a determinação simultânea HCO3-. Para validar os resultados obtidos por CZE-CCD, recorreu-se à cromatografia de íons. As concentrações de vários analitos, dependendo das amostras de chuva, avizinham-se do limite de quantificação das técnicas TP-RNL, TC-RNL e CZE-CCD. Mesmo assim, para as amostras de chuva analisadas, em geral, houve concordância satisfatória entre os valores estimados pelas três técnicas para espécies agrupadas da seguinte forma: ácidos fortes, ácidos fracos, amônio e bicarbonato.<br>Ivestigation of the variability of atmospheric chemical composition is an important tool for the evaluation and comprehension of anthropic emissions effects.Rainwater analysis has great importance in this context because wet deposition represents an efficient removal route of many atmospheric pollutants. The acidification of rainwater over wide regions of the planet is associated with the increased presence of strong acids, like sulfuric and nitric ones, and organic acids, such as acetic and formic, mainly originated from oxidative reactions od sulfur, nitrogen and carbon compounds in the atmosphere. In the context of a broad research line at IQ-USP devoted to the study of wet deposition and associated atmospheric chemistry, this dissertation advances the subject of using moderm chemometric methods to extract reliable analytical information from potentiometric and conductometric titrations of rainwater. The concentrations of acidic and alkaline species in rainwater are typically below 5 x 10-5 mol L-1, out of the reach of conventional potentiometric titrations (widely applied in the range of 10-1 and 10-3 mol L-1). Thus, multiparametric non-linear regression based on Levenberg-Marquardt method combined with coordinates transposition to reduce iterative calculation is proposed for the analysis of potentiometric data (PT-NLR). General equations based on the average protonation number of each base are used to describe the system. Bases concentrations and/or protonation constants are adjusted by NLR in order to minimize the sum-of-squares of the residuals between experimental and calculated values of the titration curves. The data analysis was tuned to provide four parameters as output: the sum of strong acids, the sum of weak acids with pK around 4.2 (mainly acetic and formic acids), the sum of HCO3-/H2co3 and the sum of weak bases with pK near 9 (essentially NH3/NH4+). To extract more analytical information from the acid/base titrations, conductance meassurements were made simultaneously with the pH readings, and a sophisticated data analysis method was envisioned. The pH data and available protonation constants for bases included in the model are used to compute the distribution of the species. The available conductivity of each species of the model is introduced in a general equation where the only unknowns are the total concentrations of the bases and of electrolyte not involved in acid/base equilibria. All these concentrations are adjusted by NLR on the conductance data, resulting in the first successful conductometric titration method with non-linear regression analysis, CT-NLR. The great advantage over PT-NLR was the capability to distinguish the contributions of acetic and formic acids in rainwater (an impossible task in PT-NLR method), but total strong acids, ammonium and bicarbonate are determined as well, beside the total ionic content of species not involved acid-base equilibria. Rainwater samples were also analysed by capillary zone electriphoresis equipment with contactless conductometric detection (CZE-CCD), as decribed in literature, regarding the major cations and anions. An improved CE method for anions was developed to afford the simultaneous determination of HCO3-. Validation of results was made with the reference method of ion chromatography. Although in many samples some analytes are low and close to the quantification limits od CZE-CCD, PT-NLR and CT-NLR, satisfactory agreement was achieved between values obtained by the three techniques for strong acids, weak acids, ammonium and bicarbonate.

A presente tese descreve o aprimoramento do acoplamento de eletroforese capilar/espectrometria de massas com ionização por electrospray (CE-ESI-MS) (1) pelo desenvolvimento de estratégias de controle de temperatura e posicionamento e (2) pela inclusão de dois detectores condutométricos sem contato (C4Ds) ao capilar de separação eletroforética de modo a se obter informações complementares àquelas fornecidas pelo MS. Os primeiros aprimoramentos consistiram na introdução de uma plataforma móvel para o CE e um módulo de refrigeração da porção externa do capilar. Com estes aprimoramentos, foi possível realizar estudo de cinética de hidrólise de monoetilcarbonato (MEC) por CE-ESI-MS, obtendo-se, pela primeira vez, o valor da energia de ativação de 99 ± 8 kJ mol-1. Posteriormente, foi desenvolvida uma série de protótipos de cartuchos impressos 3D em ABS, permitindo a introdução de até dois C4Ds. Além da inclusão dos detectores, a versão aprimorada do cartucho permitiu um bom comportamento térmico da coluna, permitindo que, tal como em sistemas CE-DAD, correntes eletroforéticas alcancem valores da ordem de 100 &#181;A sem efeitos térmicos indesejados (o que não ocorre ao se utilizar o cartucho original para CE-MS). As possibilidades do arranjo CE-(C4D)2-ESI-MS foram demonstradas pelo desenvolvimento de métodos analíticos de separação para: (1) açúcares a pH 11,2; (2) aminas biogênicas a pH 2,0 e (3) ácidos carboxílicos a pH 7,5. A compatibilização dos eletroferogramas dos C4Ds ao longo do capilar e do ESI-MS no final do capilar foi conseguida pela correção da escala de tempo. Assim, as informações obtidas com os vários detectores podiam ser facilmente complementadas. Devido à baixa seletividade intrínseca do C4D, este se mostra amplamente complementar ao ESI-MS, que é o sistema mais seletivo para CE disponível na atualidade. Embora este último também seja altamente sensível, o C4D se mostrou comparável ou até mais apropriado em alguns casos. Assim, esta combinação única apresenta um grande potencial como ferramenta analítica.<br>The capillary electrophoresis/mass spectrometry with electrospray source (CE-ESI-MS) was improved by (1) the development of new temperature control and positioning systems and (2) the inclusion of two capacitively coupled contactless conductivity detectors (C4Ds) to the electrophoretic separation capillary allowing to obtain complimentary information to the MS. The initial improvements were the introduction of a sliding platform for the CE equipment and a thermostatic module for the portion of the capillary outside the CE environment. These improvements allowed obtaining, for the first time, the activation energy of hydrolysis reaction of monoethyl carbonate: 99 ± 8 kJ mol-1. However, the most important improvement was the development of 3D-printed cartridge allowing the inclusion of up to two C4Ds along the capillary. This cartridge also allowed a significant improvement of the thermal control over the capillary. No significant difference of the original CE-DAD was observed for electrophoretic currents up to 100 &#181;A. The original CE-MS has similar behavior only until 60 &#181;A. New possibilities of the CE-(C4D)2-ESI-MS setup were demonstrated by the development of analytical methods for separation of: (1) sugars at pH 11.2, (2) biogenic amines at pH 2.0, and (3) carboxylic acids at pH 7.5. The electropherograms of the three detectors were made compatible by correcting the time scales. Therefore, the information obtained from the three detectors may be easily complemented. Thanks to the intrinsic low-selectivity of the C4D, that is complementary to the MS, which is the most selective detector for CE today. Although MS is also highly sensitive, C4D had similar or even better performance in some cases. Therefore, this unique combination is powerful analytical tool

Os biossensores são dispositivos empregados para a detecção de um analito específico, podendo assim ser no controle de qualidade nos alimentos para determinar a presença de micro-organismos, toxinas ou metabólitos. O presente estudo objetiva desenvolver um biossensor condutométrico, baseado na imobilização de peroxidasse em membranas de quitosana e quitosana com nanopartículas de ouro (AuNP) para a detecção de peroxido de hidrogênio. O trabalho foi dividido em três etapas. Na primeira etapa foi estudada a obtenção de AuNP empregando agentes redutores biológicos, sendo avaliados três monossacarídeos (glicose, frutose e galactose), três dissacarídeos (sacarose, maltose e lactose), dois biopolímeros (amido e quitosana), assim como os extratos obtidos a partir das folhas de hortelã (Mentha piperita) e cascas de furtas de abacaxi (Ananas comosus), banana (Musa sp. ), maracujá (Passiflora edulis), tangerina (Citrus reticulata). A quitosana mostrou-se como o melhor agente redutor na síntese das AuNP, as quais foram empregadas na segunda etapa para a produção de membranas. Três tipos de membranas foram processadas, membranas de quitosana sem AuNP e membranas de quitosana com AuNP com concentrações de 8 e 11mM., as quais foram caraterizadas morfológica e eletricamente. Finalmente foi avaliada a imobilização da peroxidasse usando quatro tratamentos diferentes, sendo a dispersão da peroxidasse nas soluções filmogênicas precursoras das membranas a mais eficiente. A resposta elétrica destas membranas é dependente da concentração de AuNP e da presença de enzimas, e também foi alterada quando as mesmas foram expostas a soluções de tampão fosfato com diferentes concentrações de peroxido de hidrogênio. Isto constitui o principio de operação dos biossensores condutométricos desenvolvidos neste trabalho.<br>Biosensors are devices used for detecting a specific analyte, and thus can be used in quality control of food for determining the presence of micro-organisms, toxins or metabolites. The present study aims to develop a conductometric biosensor based on the immobilization of peroxidase in membranes of chitosan and chitosan with gold nanoparticles (AuNP) for the detection of hydrogen peroxide. The work was divided into three stages. In the first stage, methods for obtaining AuNP employing biological reducing agents were studied, evaluating three monosaccharides (glucose, fructose and galactose), three disaccharides (sucrose, maltose and lactose), two biopolymers (starch and chitosan), as well as the extracts obtained from the leaves of mint (Mentha piperita) and husks dost thou pineapple (Ananas comosus), banana (Musa sp), passion fruit (Passiflora edulis), mandarin (Citrus reticulata). Chitosan exhibited the best behavior as reducing agent for the synthesis of AuNP, which were employed in the second step for the production of membranes. Three types of membranes were processed, chitosan membranes without AuNP and chitosan membranes with AuNP with concentrations of 8 and 11mM, which were morphologically and electrically characterized. Finally the peroxidase immobilization was evaluated using four different procedures, being the dispersion of the peroxidase in filmogenic solutions precursor of membranes the more efficient. The electrical response of these membranes, depends on the AuNP concentration and the presence of enzymes, and was also altered when they were exposed to hydrogen peroxide containing phosphate buffer solutions. This constitutes the principle of operation of the conductometric biosensor developed in this work.

L'encapsulation de protéines pose de nombreuses difficultés liées à leurs propriétés physicochimiques, leur sensibilité aux conditions environnementales et opératoires. La structure 3D spécifique de chaque protéine étant directement liée à son activité biologique, un contrôle de l'intégrité protéique est indispensable pour assurer l'efficacité et la sécurité des systèmes formulés. Dans cet optique, l'encapsulation par émulsion multiple a été appliquée à une protéine modèle : la myoglobine (Mb). Le but de cette thèse a été l'étude du procédé d'encapsulation à travers 3 objectifs. Le premier fut d'étudier l'influence de paramètres de formulation sur les propriétés des particules obtenues et sur la conformation de la Mb. Les mesures en spectrométrie UV/Vis. et le calcul des principaux rapports d'absorbance ont constitué une méthode de contrôle fiable et rapide. Le second fut de valider la pertinence et de montrer les limites de cette méthode en la comparant à une seconde méthode utilisant des mesures conductimétriques. Enfin, l'étape de solidification des particules par élimination du solvant ainsi que le changement de solvant ont été étudiés.. Des microsphères creuses de 15μm avec un rendement d'encapsulation de 36% ont pu être obtenues tout en maintenant la conformation native de la Mb. L'emploi de polymère de masse moléculaire élevée et un taux d'élimination de solvant trop rapide sont 2 paramètres altérants significativement la protéine. Ces travaux ouvrent la voie au développement de transporteurs d'O2 utilisables par exemple dans le cas de pathologies musculaires<br>Protein encapsulation results in several problems related to their physicochemical properties, their sensitivity to environmental conditions and operating procedures. The specific 3D structure being directly linked to their biological activity, monitoring of protein integrity is crucial to ensure the efficacy and security of formulations. In this context, the multiple emulsion method was applied to a model protein: myoglobin (Mb). The aim of this thesis was to study the encapsulation process through 3 objectives. The first was to study the influence of formulation parameters on the particle properties and the conformation of Mb. Measurements by UV/Vis. spectrometry and calculation of key absorbance ratios established a reliable and rapid method for protein monitoring. The second was to validate the pertinence and show the limits of this method by comparing it to a second one using conductimetry measurements. Finally, the particle solidification by solvent removal and the solvent exchange were studied. The process maintains the Mb native conformation in Hollow microspheres of 15μm in diameter and an encapsulation efficiency of 36% were obtained, while keeping intact the Mb native conformation. The use of high molecular weight polymer and a fast solvent removal rate are 2 parameters inducing significant protein alteration. This work paves the way for the development of O2 carriers for muscular diseases for example

A presente dissertação trata da implementação e otimização de um sistema de detecção condutométrica sem contato capacitivamente acoplada (C4D) para Eletroforese Capilar (CE). O sistema é caracterizado pela compactação do sistema de detecção, versatilidade e flexibilidade de instalação em diferentes equipamentos comerciais de eletroforese capilar e home made. Desde a década de 80, a eletroforese capilar vem se consolidando como uma das técnicas de separação mais relevantes. Normalmente, os instrumentos comerciais são disponibilizados com detectores ópticos e detectores eletroquímicos. A C4D é utilizada em eletroforese capilar posicionando-se dois eletrodos tubulares envoltos ao capilar. A aplicação de sinais de alta frequência entre os eletrodos permite monitorar variações de condutividade da solução dentro do capilar. Assim, a resposta do detector depende de diversos fatores como mobilidade do analito, do co-íon do eletrólito, da frequência e amplitude do sinal aplicado entre os eletrodos e da geometria dos mesmos. A ausência de componentes móveis torna o presente detector compacto (6,5 cm3) e robusto. O presente C4D é constituído de um oscilador local funcionando a 1,1 MHz, um circuito capaz de converter corrente em tensão, retificar e filtrar os sinais analógcos, além de apresentar um conversor de sinais analógicos em digitais (Conversor A/D) de alta resolução (21 bits efetivos). Outra vantagem é a possibilidade de determinar o diâmetro interno do capilar através da leitura do conversor A/D quando se faz passar um fluxo de ar e, posteriormente água através do capilar. A diferença de leitura de conversor A/D pode ser convertida em diâmetro interno mediante uma curva de calibração. Em uma aplicação típica, os limites de detecção baseado no critério 3s (sem filtragem inicial) foi de 0,6, 0,4, 0,3, 0,5, 0,6 e 0,8 &#181;mol L-1 para K+, Ba2+, Ca2+, Na+, Mg2+ e Li+, respectivamente, é comparável a outras implementações de alta qualidade de um detector condutométrico sem contato capacitivamente acoplado.<br>This dissertation deals with the implementation and optimization of a Capacitively Coupled Contactless Conductivity Detector (C4D) applied to capillary electrophoresis (CE). The system is characterized by compaction of the detection system, installation flexibility and versatility in different commercial capillary electrophoresis equipment and home-made. Since the 80s, capillary electrophoresis has been consolidated as one of the most important separation techniques. Typically, commercial instruments are available to optical detectors and electrochemical detectors. The C4D is used in capillary electrophoresis positioning two electrodes encased in tubular capillary. The application of high frequency signals between the electrodes allows monitoring changes in conductivity of the solution within the capillary. Thus, the detector response depends on several factors such as mobility of the analyte, the co-ion electrolyte, the frequency and amplitude of the signal applied between the electrodes and the geometry of the same. The absence of moving parts makes this compact detector (6.5 cm3) and robust. This C4D is composed of a local oscillator, working at 1.1 MHz, a circuit capable of converting current into voltage, rectify and filter the analogs signals, besides presenting a high-resolution analog-to-digital converter (ADC) (21 bits effective). Another advantage is the possibility of determining the internal diameter of the capillary by reading the ADC when it is passed a stream of air and then water through the capillary. A readings different ADC can be converted into inner diameter through a curve a calibration curve. In a typical application, the detection limits based on the 3s criterion (without baseline filtering) was 0.6, 0.4, 0.3, 0.5, 0.6 and 0.8 &#181;mol L-1 for K+, Ba2 +, Ca2 +, Na+, Mg2+ and Li+, respectively, is comparable to other high-quality implementations of a capacitively coupled contactless conductivity detector.

This diploma thesis deals with acid-base and electrolytic behavior of hyaluronan solutions at different ionic strength. Acid-base behavior of hyaluronan was investigated by acid-base titrations which were carried out with two different methods, acid and alkaline acid-base titration. Dissociation constants at different ionic strength at zero degree of dissociation and at 50% degree of dissociation were evaluated from the results of acid-base titrations. Dissociation constants obtained from acid acid-base titrations have values between 3,0 and 3,6. Dissociation constants obtained from alkaline acid-base titrations are not very informative because their values are much higher than the expected values. The study of degradation of hyaluronan during acid-base titration was performed to complete study of acid-base behavior. Electrolytic behavior of hyaluronan solution was performed by conductometric titrations in three different environments.

Le travail de la thèse présente une série de (bio)capteurs conductimétriques, à base de la clinoptilolite, pour la détermination de l’ammonium, de l’urée et de la L-arginine. La clinoptilolite, le matériau nanométrique, possédant des propriétés de la sorption intrinsèque et une capacité d’échange cationique vis-à-vis des espèces ammonium, a été d’abord utilisée pour la réalisation d’un microcapteur conductimétrique sélectif à NH4+. Ci-après, une application de ce nanomatériau dans les biocapteurs est favorable pour le fonctionnement dans les solutions tampons multicomposants. Parmi plusieurs variantes de biocapteurs à l’urée à base de la zéolite, la plus intéressante est le biocapteur, dans lequel la couche de la clinoptilolite, déposée sur le transducteur, a été recouverte par le dépôt de la couche de l’uréase et de la zéolite. Pour l’élaboration d’un biocapteur conductimétrique hautement sensible pour la détermination de la L-arginine, l’arginase et l’uréase ont été co-réticulées sur le transducteur. Une détermination quantitative de la L-arginine dans une solution buvable « Arginine Veyron » a montré un fort accord avec les données fournies par le producteur. Une procédure détaillée de l’optimisation du biocapteur conductimétrique pour la détection de la L-arginine dans le sérum bovin a été proposée. La clinoptilolite a été également appliquée comme un modificateur dans la co-immobilisation de l’arginase et l’uréase pour améliorer les caractéristiques analytiques de biocapteur conductimétriques pour la détermination de la L-arginine<br>Currentwork presents a serie of conductometric (bio)sensors based on clinoptilolite, for ammonium, urea and L-arginine determination. Clinoptilolite, a nanoscale material possessing exceptional sorption and cation-exchange properties toward ammonium species, was initially used for the development of NH4+-selective conductometric microsensor. The clinoptilolite-based microsensor was selective toward ammonium in the presence of interferences that are commonly found along with ammonium in natural waters. Hereafter, an application of this nanomaterial in biosensors is favorable for operation in multicomponent buffer solutions. Among the several variants of the urea biosensors based on zeolite, considerably better characteristics were obtained for the biosensor comprising a clinoptilolite adlayer and an upper layer of immobilized urease and zeolite. In the work, for first time was developed a highly sensitive conductometric biosensor for L-arginine determination based on arginase and urease co-immobilized in a single membrane. The results of a quantitative determination of L-arginine in a drinkable solution “Arginine Veyron”, obtained by the biosensor, were in high correlation with the data provided by the producer. The L-arginine conductometric biosensor was optimized for the serum analysis. Clinoptilolite was also applied as a modifier in co-immobilization of arginase and urease for the improvement of analytical characteristics of the conductometric biosensor for L-arginine determination

Poon Wai Mei Emily.<br>Thesis (M.Phil.)--Chinese University of Hong Kong, 1999.<br>Includes bibliographical references (leaves 74-81).<br>Abstracts in English and Chinese.<br>Chapter Chapter 1: --- Introduction --- p.1<br>Chapter 1.1. --- Importance of amino acids --- p.1<br>Chapter 1.1.1. --- Clinical samples --- p.1<br>Chapter 1.1.2. --- Food samples --- p.2<br>Chapter 1.2. --- Reviews of amino acid analysis --- p.6<br>Chapter 1.2.1. --- Ion-exchange chromatography --- p.6<br>Chapter 1.2.2. --- Gas chromatography --- p.6<br>Chapter 1.2.3. --- Thin layer chromatography --- p.8<br>Chapter 1.2.4. --- Flow injection analysis --- p.8<br>Chapter 1.2.5. --- Liquid chromatography --- p.9<br>Chapter 1.2.6. --- Capillary electrophoresis --- p.10<br>Chapter 1.2.7. --- Methods of detecting amino acid without derivatization --- p.11<br>Chapter 1.3. --- Determination of amino acids by reversed-phase ion-pair chromatography --- p.12<br>Chapter 1.4. --- The objectives of the study --- p.15<br>Chapter Chapter 2: --- Experimental --- p.16<br>Chapter 2.1. --- Materials --- p.16<br>Chapter 2.2. --- Apparatus --- p.16<br>Chapter 2.3. --- Samples --- p.16<br>Chapter 2.4. --- Procedures --- p.17<br>Chapter 2.4.1. --- Preparation of amino acid standard solution (stock solutions) --- p.17<br>Chapter 2.4.2. --- Method development --- p.17<br>Chapter 2.4.3. --- Samples preparation --- p.18<br>Chapter 2.4.4. --- Preparation of Dowex column --- p.18<br>Chapter 2.4.5. --- Extraction of amino acids from samples --- p.19<br>Chapter 2.4.6. --- Recovery test --- p.20<br>Chapter Chapter 3: --- Results and Discussions --- p.21<br>Chapter 3.1. --- Optimization --- p.21<br>Chapter 3.1.1. --- pH --- p.21<br>Chapter 3.1.2. --- Ion-interacting reagent --- p.22<br>Chapter 3.1.3. --- Organic solvent --- p.29<br>Chapter 3.1.4. --- Temperature --- p.34<br>Chapter 3.1.5. --- Chromatographic conditions --- p.36<br>Chapter 3.2. --- Application --- p.45<br>Chapter 3.2.1. --- Precision of injection --- p.45<br>Chapter 3.2.2. --- Accuracy of the method --- p.46<br>Chapter 3.2.3. --- The concentration of amino acids in food samples --- p.50<br>Chapter 3.2.3.1. --- Citrus fruits --- p.50<br>Chapter 3.2.3.2. --- Orange juice drinks --- p.60<br>Chapter 3.2.3.3. --- Chinese honey --- p.65<br>Chapter 3.2.3.4. --- New Zealand honey --- p.67<br>Chapter 3.2.3.5. --- Energy drinks --- p.70<br>Chapter Chapter 4 : --- Conclusion --- p.72<br>Chapter Chapter 5 : --- Bibliographies --- p.74<br>Chapter 6. --- Appendices --- p.82<br>Chapter 6.1. --- Table 1 : Ingredients of orange juice drinks --- p.82<br>Chapter 6.2. --- Table 2 : Honey samples --- p.83<br>Chapter 6.3. --- Table 3 : Ingredients of energy drinks --- p.83

碩士<br>國立成功大學<br>醫學工程研究所碩博士班<br>93<br>Conductivity detection can be considered electrochemical technique as well but has the ability to detect any analyte irrespective of whether it contains an electroactive species or not. We used MEMS (Micro electromechanical system) to fabricate the microelectrode, and its specification of width and interval are 50 �慆 and 30 �慆 individually. The microchannel was obtained by cast. After fabricating the mold, PDMS (polydimethylsiloxane) was poured into the cast and cured a period of time. Then peeled PDMS replica from mold and the microchannel was completed. It was 13 �慆 in width and 150 �慆 in depth. In the CE experiment, we detected organic components such as catechol, dopamine, histamine and vitamin C, and inorganic ions like K+, Li+ and Ca2+. The application of heavy metals, including Hg2+, Zn2+, Pb2+, Ag+ and Cu2+, was also investigated. 30 sec electrokinetic injection time for individual sample detection was performed using a field strength (E) of 440 V/cm, and E = 230 V/cm for electrophoresis. Each sample can be detected less than 90 sec excluding catechol. Limitation of detection (LOD) is different from each other. The lowest LOD is 25 �嵱 (5 ppm) for Hg2+. On the other hand, the electrophoresis conditions of mixed analytes were 80 V/cm injection for 3 ~ 5 sec, and 200 to 230 V/cm separation. In the results, the separation efficiency of mixed cations are not clear enough to distinguish one peak from another, but it is a good separation for simultaneous measurement of Na+ and CH3COO-. In this study, we have developed the conductivity detection in capillary electrophoresis system.

by Chuen-shing Mok.<br>Thesis (Ph.D.)--Chinese University of Hong Kong, 1993.<br>Includes bibliographical references (leaves 192-193).<br>Chapter Chapter 1 --- INTRODUCTION --- p.1<br>Chapter Chapter 2 --- INSTRUMENTATION AND THEORY --- p.9<br>Chapter Chapter 3 --- INDIRECT CONDUCTOMETRIC DETECTION OF AMINO ACIDS AFTER HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC SEPARATION --- p.17<br>Chapter Chapter 4 --- DETERMINATION OF MONOSODIUM GLUTAMATE IN FOODS WITH HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY USING INDIRECT CONDUCTOMETRIC DETECTION --- p.52<br>Chapter Chapter 5 --- HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC DETERMINATION OF ACTIVE INGREDIENTS IN COUGH-COLD SYRUPS WITH INDIRECT CONDUCTOMETRIC DETECTION --- p.83<br>Chapter Chapter 6 --- HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC DETERMINATION OF ATROPINE AND ATROPINE- LIKE ALKALOIDS IN PHARMACEUTICAL PREPARATIONS WITH INDIRECT CONDUCTOMETRIC DETECTION --- p.144<br>Chapter Chapter 7 --- CONCLUSION --- p.194