Relevant bibliographies by topics / Conical machine

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Conical machine'

Author: Grafiati
Published: 7 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Conical machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Conical machine"

1

S.K. Shukla, V.G. Arude, Jyoti M. Nath, and P.G. Patil. "Performance Evaluation of a Cotton Heaping Machine." Journal of Agricultural Engineering (India) 47, no. 3 (2024): 40–43. http://dx.doi.org/10.52151/jae2010473.1418.

Full text
Abstract:
A cotton loading/unloading machine for heaping operation was developed and evaluated for its capacity and fibre parameters. A centrifugal fan with open impeller was modified as Rembert fan by attaching a conical disc over the fan impeller. The major components of the machine were inlet flexible pipe, casing, impeller, perforated conical disc, electric motor, outlet GI pipe and trolley. Three conical discs of different perforation sizes were tested to optimize the output and efficiency of the developed machine. A conical disc with 3 mm perforation size was found as optimum size, without choking
APA, Harvard, Vancouver, ISO, and other styles
2

Mitome, Ken-ichi, Tohru Gotou, and Takeshi Ueda. "Tooth Surface Measurement of Conical Involute Gears by CNC Gear-Measuring Machine." Journal of Mechanical Design 120, no. 2 (1998): 358–63. http://dx.doi.org/10.1115/1.2826981.

Full text
Abstract:
Developed is a new tooth surface measurement of conical involute gears by CNC gear-measuring machines. Advances in the design and production of conical involute gears and its wide applications are demanding the measurement of the conical involute gears using CNC gear measuring machines. Therefore, a new concept called an “equivalent helical gear” is introduced. Thus, a conical involute gear can be measured as a helical involute gear. Experiments demonstrate that this new method gives accurate results and has practical value. Finally tooth surface analysis of a conical involute gears is also pr
APA, Harvard, Vancouver, ISO, and other styles
3

Zhao, Wen Hui, Zhen Yun Duan, and Zhong Wei Ren. "Study on Machining and Measurement for Borosilicate Glass Conical Ellipsoid." Advanced Materials Research 291-294 (July 2011): 2999–3002. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.2999.

Full text
Abstract:
Surfaces formed by rotating quadratic curve are widely applied in engineering practice. After having studied machining methods and machines, the CNC grinding method based on macro program B for borosilicate glass elliptical cone surface machine with high precision is proposed. Within the allowable error, the coordinates are calculated according to the equation of axial section curve and the surface is formed with tools moving on axial section curve. Through setting parameters of the lathe, the new canned cycle can be defined to process all different kinds of the elliptical cone surface of same
APA, Harvard, Vancouver, ISO, and other styles
4

Fugelso, M. A. "A standard conical point drill grinding machine." International Journal of Machine Tools and Manufacture 41, no. 6 (2001): 915–22. http://dx.doi.org/10.1016/s0890-6955(00)00068-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bogdanov, A. V., A. V. Gritsenko, M. V. Cheskidov, and L. A. Shtrikker. "Development of a Vertical Mashing Machine and Specifying its Main Parameters." Agricultural Machinery and Technologies 17, no. 1 (2023): 62–69. http://dx.doi.org/10.22314/2073-7599-2023-17-1-62-69.

Full text
Abstract:
The paper proves the necessity to create new modernized types of fruit and vegetable processing machines. The paper highlights the importance of such machinery versatility, since each individual type of fruit and vegetable has its own physical characteristics, such as solidity, viscosity, moisture content, fibers, seeds, and grains. (Research purpose) To study the zucchini mashing process performed by the developed vertical mashing unit. (Materials and methods) An improved mashing machine design is proposed: a vertical plant with a conical auger inside and a sieve drum. (Results and discussion
APA, Harvard, Vancouver, ISO, and other styles
6

Wu, Yingsi, Xiangming La, Xuan Zhao, Fei Liu, and Jianguo Yan. "Design and Performance Testing of Seed Potato Cutting Machine with Posture Adjustment." Agriculture 15, no. 7 (2025): 732. https://doi.org/10.3390/agriculture15070732.

Full text
Abstract:
In China, potatoes are predominantly cultivated using the tuber piece planting method. During the cutting process, it is essential to divide seed potatoes into tuber pieces based on the distribution of their bud eyes, ensuring that each tuber piece contains one to two bud eyes. These tuber pieces are subsequently sown into the soil. Currently, the preparation of potato tuber pieces relies heavily on manual labor, which presents challenges such as inefficiency and high operational costs. To address these issues, a seed potato cutting machine capable of posture adjustment, cutting, and spraying
APA, Harvard, Vancouver, ISO, and other styles
7

Baroiu, Nicuşor, Viorel Păunoiu, Virgil Gabriel Teodor, Florin Susac, and Nicolae Oancea. "Geometrical analysis, for rapid prototyping, of the compressor’s helical conic rotor model." MATEC Web of Conferences 178 (2018): 02006. http://dx.doi.org/10.1051/matecconf/201817802006.

Full text
Abstract:
The conical rotary compressor represents a solution for gases compression, for relatively small flow, in conditions of a superior energetic efficiency. Although the theoretical solution for the helical conical compressor was elaborated decades ago, a viable technology solution become possible at industrial level only after the development of machine tools with numerically controlled axes. In this paper is proposed a study, analytical and graphical, concerning the geometry of conical rotary compressor’s rotors, modelled by rapid prototyping technology. The propose modelling allow to elaborate v
APA, Harvard, Vancouver, ISO, and other styles
8

Fan, Qiuxia, Qianqian Zhang, Guirong Liu, et al. "An experimental study on wearing of conical picks interacting with rock." Transactions of the Canadian Society for Mechanical Engineering 43, no. 4 (2019): 544–50. http://dx.doi.org/10.1139/tcsme-2018-0225.

Full text
Abstract:
Wearing of conical picks on a coal mining machine and roadheaders are investigated experimentally using a full-scale rotary cutting machine. This study considers three types of conical picks with different tip materials to examine the effects of wear resistance of conical picks and wear characteristics in response to cutting load. The influence of pick wear on the cutting load and pick tip temperature are analyzed, thereby providing an experimental-based guideline for reducing pick wear. The results indicate that the cemented carbide pick has the best wear resistance among the three kinds of p
APA, Harvard, Vancouver, ISO, and other styles
9

Kruzel, Robert. "Conical Round Tubes - Preliminary Tests for Use on Lighting Columns." Materials Science Forum 972 (October 2019): 141–47. http://dx.doi.org/10.4028/www.scientific.net/msf.972.141.

Full text
Abstract:
Conical pipes belong to a group of economical profiles, which find broad application in various metal products. Until now the conical pipes are manufactured by following methods: rolling on two-high mill in impressions with varying depth on the rolls perimeter; forging in lever swaging machine, formation in combined process of drawing and rolling, and rolling on skew rolling mill. Manufacturing of conical pipes belong to complicated engineering processes, and used until now methods do not allow to meet demand for conical pipes – especially the long ones with large crosswise dimensions, e.g. pi
APA, Harvard, Vancouver, ISO, and other styles
10

Mitome, K. "Inclining Work-Arbor Taper Hobbing of Conical Gear Using Cylindrical Hob." Journal of Mechanisms, Transmissions, and Automation in Design 108, no. 1 (1986): 135–41. http://dx.doi.org/10.1115/1.3260776.

Full text
Abstract:
The inclining work-arbor taper hobbing is considered one of the most practical methods to cut a conical gear. But an exact hobbing theory has not been made clear, and besides an ideal hobbing machine available inpractical use has not been developed so far. In this paper, an exact kinematic analysis of this taper hobbing is presented, and an imaginary generating rack is obtained. A gear generated by this rack is defined as an ideal gear. Practical hobbing of conical involute gears is discussed. A hobbing machine having an inclining rotary table is tested, and some test gears are cut and inspect
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Conical machine"

1

Coutant, Leonard. "Modèle et méthode de dimensionnement d'une machine synchrone conique : unification des topologies radiales et axiales." Electronic Thesis or Diss., Université de Toulouse (2023-....), 2025. http://www.theses.fr/2025TLSEP030.

Full text
Abstract:
La recherche permanente d’accroître la densité de puissance et l'efficacité énergétique dans de nombreux secteurs industriels, notamment dans celui de la mobilité, a conduit au perfectionnement de deux grandes topologies de machines : les machines à flux radial et les machines à flux axial, chacune présentant des avantages distincts. Or, les progrès constants dans les procédés de fabrication additive autorisent aujourd’hui une révision des concepts et de nouvelles possibilités, telles que les machines à flux conique.À ce titre, un modèle géométrique propre à ce concept est développé. Reposant
APA, Harvard, Vancouver, ISO, and other styles
2

Ogrodnik, Peter Jan. "Operation of rotor-bearing systems subject to dynamic conical misalignment." Thesis, Open University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.330280.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Correa, Mauricio. "Um estudo comparativo do comportamento das afiações conica e conica radial (racon) em brocas helicoidais de aço rapido." [s.n.], 1996. http://repositorio.unicamp.br/jspui/handle/REPOSIP/264210.

Full text
Abstract:
Orientador: Olivio Novaski<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica<br>Made available in DSpace on 2018-07-21T14:28:26Z (GMT). No. of bitstreams: 1 Correa_Mauricio_M.pdf: 18944022 bytes, checksum: fa80ba3f95ae565ff2e1de6ed0385620 (MD5) Previous issue date: 1996<br>Resumo: O objetivo principal deste trabalho é estudar o comportamento das afiações Racon (cônica radial) e Cônica em brocas helicoidais de aço rápido e analisar a performance das mesmas, buscando correlacioná-Ias às suas características geométricas. Para esta finalidade, realiz
APA, Harvard, Vancouver, ISO, and other styles
4

Storozhev, Dmitry Leonidovich. "Smart Rotating Machines for Structural Health Monitoring." Cleveland State University / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=csu1262724991.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Taylor, Matthew H. "Defining a Model for Tool Consumption Rate on Asphalt Reclamation Machines." BYU ScholarsArchive, 2006. https://scholarsarchive.byu.edu/etd/1293.

Full text
Abstract:
Asphalt and concrete reclamation machines are used to cut roadways when a repair is required. The performance of these machines can affect the quality of road repairs, and cost/profitability for both contractors and governments. We believe that several performance characteristics in reclamation machines are governed by the placement and pattern of cutting picks on the cutter head. Previous studies, focused on mining and excavation applications, have shown strong correlation between placement and wear. The following study employs a screening experiment (observational study) to find significant
APA, Harvard, Vancouver, ISO, and other styles
6

Choudary, Chaitanya P. "Experimental And Analytical Investigations Into Development Of Double-Tuned Expansion Chambers And Extended Concentric Tube Resonators." Thesis, 2010. https://etd.iisc.ac.in/handle/2005/1270.

Full text
Abstract:
The performance of an acoustic filter (or muffler) is measured in terms of one of the following parameters: Insertion Loss (IL), Level difference (LD) and Transmission loss (TL). All these three parameters may be evaluated in terms of the four-pole or transfer matrix parameters. Appropriate experimental setups have been designed and developed and practical considerations are described. Measured values of TL are compared with the analytically predicted values. It is shown that the Two-Source-Location method is relatively the best. To start with, the matrizant analysis of conical concentric tube
APA, Harvard, Vancouver, ISO, and other styles
7

Choudary, Chaitanya P. "Experimental And Analytical Investigations Into Development Of Double-Tuned Expansion Chambers And Extended Concentric Tube Resonators." Thesis, 2010. http://etd.iisc.ernet.in/handle/2005/1270.

Full text
Abstract:
The performance of an acoustic filter (or muffler) is measured in terms of one of the following parameters: Insertion Loss (IL), Level difference (LD) and Transmission loss (TL). All these three parameters may be evaluated in terms of the four-pole or transfer matrix parameters. Appropriate experimental setups have been designed and developed and practical considerations are described. Measured values of TL are compared with the analytically predicted values. It is shown that the Two-Source-Location method is relatively the best. To start with, the matrizant analysis of conical concentric tube
APA, Harvard, Vancouver, ISO, and other styles
8

Zeng, Zheng-Yi, and 曾政益. "Based on Conics Theory of Machine Vision Technique to Develop Virtual Environment’s Camera Control Interface." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/42543186791435302261.

Full text
Abstract:
碩士<br>元智大學<br>工業工程與管理學系<br>90<br>The idea of conics-enhanced 3D recovery is based on an important property of conics theory: the 3D rotation and translation information of a planar circle with know radius could be derived from its elliptic projection. Using this property, we could use a camera to capture the movement of a planar circle and derive its 3D movement information based on conic theory【張朝舜,1999】【韋立明,2000】. We have been working on conics-enhanced machine vision approach for 3D recovery for 2 year. Our previous prototype system could not trace the elliptic projections of the
APA, Harvard, Vancouver, ISO, and other styles
9

Wei, Li-Ming, and 韋立明. "Using Conics Theory to Develop a Low-cost, Easy-to-operate Man Machine Interface for Web-based Virtual Environment." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/69999518736842360858.

Full text
Abstract:
碩士<br>元智大學<br>工業工程研究所<br>89<br>To facilitate the development of a human-popularized environment, a low-cost, easy-to-operate motion capture method has been developed in a previous work (Chang, 1999). This method is based on an important property of conics theory: the 3D rotation and translation of a planar circle with known radius could be derived from its 2D elliptic projection. This work focus on the improvement of several drawbacks suffered by previous system. First, we employ the Java Media Framework (JMF) to integrate the video camera with our motion tracking system. Secondl
APA, Harvard, Vancouver, ISO, and other styles
10

Dolanský, Jindřich. "Stroj času jako kulečník." Doctoral thesis, 2011. http://www.nusl.cz/ntk/nusl-299133.

Full text
Abstract:
Title: Billiard time machine Author: Jindřich Dolanský Department: Institute of Theoretical Physics Supervisor: doc. RNDr. Jiří Langer, CSc. Supervisor's e-mail address: Jiri.Langer@mff.cuni.cz Abstract: In this work we investigate a simple interacting system of an elastic particle in the non-relativistic spacetime with a nontrivial causal structure realized by a worm- hole with a time shift. We require that standard local physical laws hold, and search for their globally consistent solutions, i.e, we assume the validity of the principle of self-consistency. If there were nontrivial set of ini
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Conical machine"

1

Ovtov, Vladimir. Machine parts. Course design. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1171976.

Full text
Abstract:
The textbook discusses the methodology of course design of general-purpose drives with a single-stage gearbox (cylindrical, conical and worm) and a V-belt or chain transmission. The procedure for calculating gears and constructing assembly drawings of gearboxes is shown, the development of specifications using the COMPASS-3D computer-aided design system is described. Examples of the design of drawings of the general type of the drive, assembly drawings of gearboxes and working drawings of parts of various types of gearboxes are given.&#x0D; Meets the requirements of the federal state education
APA, Harvard, Vancouver, ISO, and other styles
2

F, Wingquist Carl, ed. Conical bit rotation as a function of selected cutting parameters. U.S. Dept. of the Interior, Bureau of Mines, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Descartes and the hyperbolic quest: Lens making machines and their significance in the seventeenth century. American Philosophical Society, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Conical machine"

1

Yaghoubi, Majid, and Hamed Tavakoli. "Conical Joints." In Mechanical Design of Machine Elements by Graphical Methods. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04329-1_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhao, Yaping, and Xiao Zhang. "Meshing Limit Line of Conical Worm Pair." In New Trends in Mechanism and Machine Science. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-55061-5_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ondrášek, Jiří. "Conical Polygon Connection in Design of Indexing Gearboxes with Radial Cams." In Mechanisms and Machine Science. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-64553-2_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dimitrov, Sasko, Sara Srebrenkoska, Dejan Krstev, Mishko Dzidrov, Marija Cekerovska, and Todor Cekerovski. "Theoretical Research on Transient Process in Hydraulic Cylinder with Conical Cushioning Devices." In Mechanisms and Machine Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-80512-7_70.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sarrazin, Marian, and Robert Liebich. "On the Nonlinear Dynamics of a Rigid Rotor Supported by Shimmed Conical Gas Foil Bearings." In Advances in Mechanism and Machine Science. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-45705-0_89.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Elrawashdeh, Zeina, Philippe Revel, Christine Prelle, and Frédéric Lamarque. "High Precision Fabrication of an Innovative Fiber-Optic Displacement Sensor." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_5.

Full text
Abstract:
AbstractThis study presents the high precision fabrication technique, employed to manufacture a 3D conical grating, used as the reflector element, for a fiber-optic displacement sensor. To get high performance in terms of the surface quality, as well as a dimensional precision, the surface of the reflector must be a polished-mirror surface. To do so, a high precision turning machine along with aluminum alloy were the technical choices made. Two prototypes with different geometric dimensions, have been fabricated using the same machining strategy. Single crystal diamond tool was chosen, to obta
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Shuxue, and Weipeng Xu. "Force Analysis and Reliability Improvement Method for the Conical Picks of the Coal Mining Machine Drum." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-2625-0_64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tevar, Niraj, Vedvyas Dwivedi, and Prarthan Mehta. "Design and Simulation of Gaussian Profile Conical Corrugated Horn Antennas Using CST for W Band." In Proceedings of the 2nd International Conference on Recent Trends in Machine Learning, IoT, Smart Cities and Applications. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-6407-6_61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Balci, C., F. Shoaee, D. Tumac, and H. Copur. "Effect of cutting speed on conical pick cutter performance obtained from Portable Linear Rock Cutting Machine (PLCM)." In Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World. CRC Press, 2023. http://dx.doi.org/10.1201/9781003348030-137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dahlhaug, Ole Gunnar. "Swirl Flow in Conical Diffusers." In Hydraulic Machinery and Cavitation. Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-010-9385-9_84.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Conical machine"

1

Pivkin, Petr M., Anton M. Yazev, Ekaterina S. Nazarenko, et al. "A new method for identifying the key indicators and dependencies in the processing of images of helical surfaces of conical cutters obtained with the optical measuring machine." In Optoelectronic Imaging and Multimedia Technology XI, edited by Zhenrong Zheng and Jinli Suo. SPIE, 2024. http://dx.doi.org/10.1117/12.3037644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Faber, P., and R. B. Fisher. "A Buyer's Guide to Euclidean Elliptical Cylindrical and Conical Surface Fitting." In British Machine Vision Conference 2001. British Machine Vision Association, 2001. http://dx.doi.org/10.5244/c.15.54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tanaka, Hiromichi, Akinori Sumita, Atsushi Suzuki, and Yasuhiro Manabe. "Experimental Study on Water Flow Characteristics of Conical Floating Structure." In ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/omae2009-79817.

Full text
Abstract:
This research consisted of an experimental study regarding the water flow characteristics of a conical floating body with wave-absorbing and water-flow features. The conical floating body is a conically shaped floating structure comprising 12 sheets of convergence banks and a cylindrical tank in the center to catch the overtopping waves. The experiment employed the No. 3 machine model to investigate the water flow characteristics for the two water-flow methods of (a) the flow of water to the receiving tank and (b) free discharge, by changing the following parameters: wave condition, wave overt
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Jun, Jiaxiang Wang, and Guoxin Zhang. "Simulation and Optimization of Millimeter Wave Conical Conformal Phased Array." In 2021 3rd International Conference on Applied Machine Learning (ICAML). IEEE, 2021. http://dx.doi.org/10.1109/icaml54311.2021.00111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Innocenti, Carlo. "The Kinematics of Conical Involute Gear Hobbing." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41982.

Full text
Abstract:
The paper is aimed at finding all relative rigid-body positions of two conical involute gears that mesh together with no backlash. The results are then specialized to determine two key setting parameters for a hobbing machine that has to cut a conical involute gear. A numerical example shows application of the presented results to a case study.
APA, Harvard, Vancouver, ISO, and other styles
6

Feng, Zhengkun, Henri Champliaud, and Thien-My Dao. "Three-Dimensional Finite Element Analyses for Pyramidal Three-Roll Bending Process." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10888.

Full text
Abstract:
Many applications of conical roll bending can be found in manufacturing industry, such as rolling a conical segment of a wind turbine tower or an alternative process of molding a large crown for a Francis turbine. This molding process could be achieved by assembling several conical segments. For the purpose of using cylindrical rolls or reusing the existing conical rolls of the kinematical conical roll bending process for non-kinematical conical roll bending process, attachments were proposed in order to reduce the velocity at the top edge of the plate. In contrast with a kinematical conical r
APA, Harvard, Vancouver, ISO, and other styles
7

Kascak, Peter, Ralph Jansen, Timothy Dever, Aleksandr Nagorny, and Kenneth Loparo. "Motoring performance of a conical pole-pair separated bearingless electric machine." In 2011 IEEE Energytech. IEEE, 2011. http://dx.doi.org/10.1109/energytech.2011.5948515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Roggia, Sara, Gaetano Roggia, Cupetino Francesco, and Michael Galea. "Rotor configuration comparison for the design of a PM conical machine." In 2019 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2019. http://dx.doi.org/10.1109/ecce.2019.8912492.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rasulov, Nariman, Ugurlu Nadirov, and Irada Abbasova. "Improving of Machining Efficiency of Threads and Conical Surfaces of Diverse Directions by Managing Static Technological Relationships." In 2nd International Scientific-Practical Conference "Machine Building and Energy: New Concepts and Technologies". Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-4ozpgf.

Full text
Abstract:
In the work, the design of the tool – boring bar for parallel machining of conical surfaces and threads in coupling-type parts with opposite directions, same inclination, coaxial conical surfaces and threads is given, and their generalized design features are presented for the machining of couplings of different types and sizes. With the application of the designed tool - boring bar to machining of inner surfaces of couplings, their machining accuracy, especially accuracy of coaxiality of threads, thus the load-carrying capacity of the couplings increases, the technological cost of their produ
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Xiaopeng, Yuzuo Liu, Shaoyun Song, Zhigang Hu, Meili Cao, and Yonglin Zhang. "Design and Experiment on Vertical Conical Vacuum Spraying Machine for Extruded Feed." In EBIMCS 2020: 2020 3rd International Conference on E-Business, Information Management and Computer Science. ACM, 2020. http://dx.doi.org/10.1145/3453187.3453368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Conical machine' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography