Relevant bibliographies by topics / Constructive technological scheme

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Constructive technological scheme'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Constructive technological scheme.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Constructive technological scheme"

1

Menejljuk, O., and O. Nikiforov. "MEASURING OF CONSULTING ENGINEER EFFICIENCY WHEN USING CONSTRUCTIVE-TECHNOLOGICAL TEMPLATES." Municipal economy of cities 6, no. 159 (2020): 10–18. http://dx.doi.org/10.33042/2522-1809-2020-6-159-10-18.

Full text
Abstract:
Modern innovations in public administration of construction provide significant modernization of the industry on the basis of engineering and project management - the introduction of the role of consulting engineer. This role involves a wide range of communications between all stakeholders in the investment and construction process. It may be relevant to use an information tool for modeling the product and construction processes - design and technological templates - to measure the effectiveness of these communications and, accordingly, to measure the effectiveness of the consulting engineer.
APA, Harvard, Vancouver, ISO, and other styles
2

Babii, I., L. Kucherenko, G. Bochorishvili, and Ye Kalchenia. "EVALUATION OF EFFICIENCY OF EXPERIMENTAL CONSTRUCTIVE-TECHNOLOGICAL SCHEMES OF HEAT AND SOUND INSULATION OF BUILDINGS." Modern technology, materials and design in construction 29, no. 2 (2021): 71–76. http://dx.doi.org/10.31649/2311-1429-2020-2-71-76.

Full text
Abstract:
This work is devoted to solving an important issue regarding the sound insulation of floors in residential buildings, namely from impact noise. The article considers the structural and technological schemes of floor sound insulation of three types, using different materials to achieve regulatory requirements for sound insulation from impact noise. Field tests were conducted in the building under construction. The technology of execution of each type of a floor, and in the future and comfort of inhabitants of the apartment will depend on the chosen constructive-technological scheme. Comparison
APA, Harvard, Vancouver, ISO, and other styles
3

Andreev, V. L., S. A. Vasilyev, S. L. Demshin, V. V. Ilichev, and D. A. Cheremisinov. "Justification of constructive technological scheme of multifunctional unit." IOP Conference Series: Materials Science and Engineering 560 (July 10, 2019): 012051. http://dx.doi.org/10.1088/1757-899x/560/1/012051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Babiy, I. N., and Ye Yu Kalchenia. "FIELD TESTS OF THE EXPERIMENTAL CONSTRUCTIVE SCHEMES OF SOUND INSULATION OF THE FLOOR." Bulletin of Odessa State Academy of Civil Engineering and Architecture, no. 86 (March 31, 2022): 104–10. http://dx.doi.org/10.31650/2415-377x-2022-86-104-110.

Full text
Abstract:
The dynamic development of urbanization in Ukraine, as well as throughout the world, only increases the number of noise sources that disturb people. And this cannot be ignored, because insufficient sound insulation in an apartment threatens people with neuroses, changes in biorhythms, disorders of the digestive system, headache, memory impairment, problems associated with the perception of color. Therefore, you need to pay maximum attention to the sound insulation of premises during the construction of residential buildings. One of the main disadvantages of monolithic reinforced concrete multi
APA, Harvard, Vancouver, ISO, and other styles
5

Baurov, A. A. "Development of model of flotation combine with integrated continuous granular filter." Repair, Reconditioning, Modernization, no. 12 (December 2023): 21–24. http://dx.doi.org/10.31044/1684-2561-2023-0-12-21-24.

Full text
Abstract:
The analysis of prospects for the use of flotation combines in technological schemes of wastewater treatment has been carried out. This purification method is based on the use of physical-chemical processes such as flotation and filtration. A constructive scheme of the flotation combine with an integrated continuous granular filter is proposed. The possibilities of using a pneumatic-hydraulic aeration system are considered.
APA, Harvard, Vancouver, ISO, and other styles
6

Vasylkovskyi, Oleksii, Serhii Leshchenko, Oleksandr Nesterenko, Dmytro Petrenko, and Serhii Iakymenko. "Substantiation of the Constructive Scheme of the Pneumatic-grain Separator." National Interagency Scientific and Technical Collection of Works. Design, Production and Exploitation of Agricultural Machines, no. 51 (2021): 104–10. http://dx.doi.org/10.32515/2414-3820.2021.51.104-110.

Full text
Abstract:
The aim of the article is to improve the design of the original centrifugal grain separator. The separator is designed to separate the components of grain materials by size and aerodynamic properties. The basic design satisfactorily performs the technological process, but has large dimensions vertically. Reducing the size will simplify the design and reduce the cost of the machine. The article proposes to replace the double pneumatic cleaning of grain material with a single one. At the same time the car gets rid of the closed aspiration system. The closed aspiration system has operational adva
APA, Harvard, Vancouver, ISO, and other styles
7

BASARAB, Volodymyr. "Methods of modeling technological processes of construction of buildings and structures." Ways to Improve Construction Efficiency 1, no. 55 (2025): 24–31. https://doi.org/10.32347/2707-501x.2025.55(1).24-31.

Full text
Abstract:
The article is devoted to the study of methods for modeling technological processes of building and construction. The relevance of research and development of methods for modeling technological processes in order to increase the efficiency of the use of construction technologies is emphasized. A review of existing methods for describing technological processes of building (structure) construction was conducted and the feasibility of researching and developing methods that take into account various structural and technological factors was substantiated. The basic principles of mathematical and
APA, Harvard, Vancouver, ISO, and other styles
8

Hrushetskiy, Sergiy, and Vitaliy Yaropud. "JUSTIFICATION OF CONSTRUCTIVE-TECHNOLOGICAL PARAMETERS OF THE POTATO HARVESTING MACHINE." Vibrations in engineering and technology, no. 1(100) (March 23, 2021): 139–51. http://dx.doi.org/10.37128/2306-8744-2021-1-14.

Full text
Abstract:
For Ukraine's successful entry into Western markets, it is necessary to ensure the competitiveness of its own products, which is achieved through comprehensive mechanization of technological processes, reducing labor costs, increasing yields and quality of products. Accordingly, the aim of the study was to conduct a comparative analysis of structural and technological schemes of potato harvesters identified the most appropriate direction to improve existing and create new designs of potato harvesters, undermining working bodies and separators and substantiation of structural and technological
APA, Harvard, Vancouver, ISO, and other styles
9

Bayboboev, N. G., G. K. Rembalovich, R. H. Murodov, A. M. Mamadaliev, and Sh B. Akbarov. "Justification of the technological scheme of the separating working body of potato digger." IOP Conference Series: Earth and Environmental Science 1112, no. 1 (2022): 012082. http://dx.doi.org/10.1088/1755-1315/1112/1/012082.

Full text
Abstract:
Abstract In the article, based on theoretical and experimental research, the choice of the constructive-technological scheme of the separating working body of potato diggers is substantiated. As a result, it was found that the separating working bodies of potato diggers with drive disc-elastic fingers located above the elevator bed provide the best performance.
APA, Harvard, Vancouver, ISO, and other styles
10

Pavel, Shkolnikov Sergei Dotsenko Lyudmila Kryuchkova Viсtor Samuylo Sergei Ivanov. "TECHNOLOGICAL APPROACHES TO THE USE OF SOSNOVSKY HOGWEED AS A COMPONENT OF THE FEED ADDITIVE." INDO AMERICAN JOURNAL OF PHARMACEUTICAL SCIENCES o6, no. 04 (2019): 7078–81. https://doi.org/10.5281/zenodo.2628895.

Full text
Abstract:
<em>On the basis of the adopted provisions, the necessity and expediency of utilization of Sosnovsky hogweed through its use as part of a protein-carbohydrate additive for farm animals is substantiated. The list of technological operations necessary and sufficient for the development of a constructive-technological scheme of a line for the production of granules and briquettes containing a system of machines to ensure the production of a protein-carbohydrate additive has been substantiated. The parameters of the proposed technical properties are justified.</em> <strong>Keywords: </strong><em>h
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Constructive technological scheme"

1

Bočková, Andrea. "Stavebně technologický projekt přípravy a realizace administrativní budovy firmy TREFAL, spol. s r.o." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409917.

Full text
Abstract:
The aim of this thesis is the development project of the firm TREFAL, Spol. s.r.o. The object SOO2 - Administrative building - that is a constituent of the area of TREFAL, Spol. s.r.o. is discussed topic of this thesis. The main focus is the construction development of the monolithic supporting construction objects. The thesis further depicts and investigates accompanying and overall technical report, an implementation study of the main technological stages, situational designs, a solution of the broader traffic relations including a proposal for the supplementation of the construction develop
APA, Harvard, Vancouver, ISO, and other styles
2

Schauer, Martin. "Stavebně technologický projekt bytového domu Meandr v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227445.

Full text
Abstract:
This diploma thesis deals with the construction technological project of block of flats residence Meandr in Brno - Komín. On the given topic are processed and all necessary supporting documents that enhances the clarity and orientation in matters large building for the preparation of the construction process. Given the scale, complexity and location of the building is structurally location technology project addresses the only earthworks and construction site of the main building object SO-01 only. Furthermore, nine small objects that are closely tied this main object within the premises of a
APA, Harvard, Vancouver, ISO, and other styles
3

Holba, Petr. "Příprava a realizace výrobní haly v Hulíně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391944.

Full text
Abstract:
The topic of the diploma thesis is a solution of the construction and a technological project of a production hall in Hulín. The thesis consists of an accompanying and a summary technical report, a study of the main technological stages implementation, a coordination situation of the construction with the closer transport relations, a solution of wider transport route relationships including a proposal of the building supply and an oversized transport solution, an object time schedule and a financial plan of the construction including the staff balance, a time schedule for the selected process
APA, Harvard, Vancouver, ISO, and other styles
4

Masiri, Ebba. "Exploring the practice of quality control in the onscreen marking of ordinary level Biology in Zimbabwe." Thesis, 2020. http://hdl.handle.net/10500/26772.

Full text
Abstract:
Text in English, abstract in English, Shona and Xhosa<br>The purpose of this study was to explore the practice of quality control in the onscreen marking (OSM) environment of Biology (5008) examinations between 2013 and 2017. Examination marking is gradually being migrating from paper-based marking (PBM) to OSM in a bid to improve the efficiency and quality of marking. The Zimbabwe School Examinations Council (ZIMSEC) introduced OSM for some O Level subjects in June 2012, in a context characterised by a persistent economic crisis, patchy internet coverage, erratic power supplies and low digita
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Constructive technological scheme"

1

Gordeev-Burgvic, Daniel'. Automation and management of water supply and sanitation systems. INFRA-M Academic Publishing LLC., 2025. https://doi.org/10.12737/1958352.

Full text
Abstract:
The textbook briefly describes the basics of automation and the theory of automatic regulation, the elements of automatic devices, the construction of functional circuits of automation, control and measuring devices and devices. The principles and basic schemes of automation of water supply and sanitation systems are considered. Meets the requirements of the latest generation of federal state educational standards for higher education. For students studying in the specialty "Water Supply and sanitation" in the fields of "Construction", "Management in technical systems", "Automation of technolo
APA, Harvard, Vancouver, ISO, and other styles
2

Ignatova, Ol'ga, and Vladimir Zavadskiy. Technology of insulation and wall materials and products. INFRA-M Academic Publishing LLC., 2025. https://doi.org/10.12737/2141115.

Full text
Abstract:
The textbook provides an analysis and characteristics of various thermal, waterproofing and wall materials, an assessment of their suitability for use in construction. Classifications by structure, purpose, basic construction and operational properties, and areas of application are given. The basic schemes of manufacturing thermal insulation materials based on mineral and organic raw materials, as well as the basic principles of creating bitumen and polymer waterproofing materials are presented. Modern technologies for the production of wall products from cellular concretes, lightweight concre
APA, Harvard, Vancouver, ISO, and other styles
3

Mehrencev, Andrey, and Boris Men'shikov. Technology and equipment for the production of semi-finished products of wooden housing construction and special types of saw products. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1099276.

Full text
Abstract:
It consists of two main sections. The first section provides information about the properties of wood as a wall material used for the construction of baths, houses, cottages. The device of the equipment is considered, structural and technological schemes of sites and shops for the production of semi-finished products for wooden housing construction are given. In the second section, various areas of processing of Humpbacks for various types of saw products are considered, including those that were not previously produced from them - profile milled parts, pallets, etc. Compiled in accordance wit
APA, Harvard, Vancouver, ISO, and other styles
4

Johansen, Bruce, and Adebowale Akande, eds. Nationalism: Past as Prologue. Nova Science Publishers, Inc., 2021. http://dx.doi.org/10.52305/aief3847.

Full text
Abstract:
Nationalism: Past as Prologue began as a single volume being compiled by Ad Akande, a scholar from South Africa, who proposed it to me as co-author about two years ago. The original idea was to examine how the damaging roots of nationalism have been corroding political systems around the world, and creating dangerous obstacles for necessary international cooperation. Since I (Bruce E. Johansen) has written profusely about climate change (global warming, a.k.a. infrared forcing), I suggested a concerted effort in that direction. This is a worldwide existential threat that affects every living t
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Constructive technological scheme"

1

Solona, Olena, and Ihor Kupchuk. "DEVELOPMENT OF A FUNCTIONAL MODEL OF A VIBRATING MILL WITH ADAPTIVE CONTROL SYSTEM OF MODE PARAMETERS." In Modernization of research area: national prospects and European practices. Publishing House “Baltija Publishing”, 2022. http://dx.doi.org/10.30525/978-9934-26-221-0-12.

Full text
Abstract:
The research was supported and funded by the Ministry of Education and Science of Ukraine under grant No. 0121U108589 «Development of a complex of energy-efficient and resource-saving equipment and promising technologies for feeding farm animals of the AIC of Ukraine». The introduction of energy-efficient machines and technologies in the system of feed preparation and animal feeding is an important prerequisite for the development of agriculture. One of the advanced types of grinding technology are vibrating mills, which provide high specific productivity at relatively low energy consumption,
APA, Harvard, Vancouver, ISO, and other styles
2

"Development of Generalized Approaches in the Problems of Evaluation and Control of the Dynamic State of Mechanical Oscillatory Systems." In Structural Mathematical Modeling Applications in Technological Machines and Transportation Vehicles. IGI Global, 2023. http://dx.doi.org/10.4018/978-1-6684-7237-8.ch004.

Full text
Abstract:
The chapter is devoted to taking into account the design features of technical objects, the design schemes of which are mechanical oscillatory systems. General approaches to the construction of mathematical models of the rotating type and their dynamic properties are considered. The concepts of rotational-type systems with a massless rod with an intermediate fulcrum are detailed. A comparative analysis of the capabilities of vibration protection systems has been carried out. The analysis of systems with a protective object performing rotational movements is carried out, taking into account the
APA, Harvard, Vancouver, ISO, and other styles
3

Gromachenko, Sergii, Anatoliy Rokochinskiy, Pavlo Volk, Lyudmyla Kuzmych, Nataliia Prykhodko, and Anna Kuzmych. "Substantiating Land Reclamation Measures for Protecting Territories and Water Bodies From Pollution Within Municipal Solid Waste Storing Site Area." In Advances in Environmental Engineering and Green Technologies. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-5693-7.ch016.

Full text
Abstract:
The scientific research has been conducted and the methodological approaches to leachate volume estimation based on improved water-balance calculations; sorptive ameliorant application rate estimation as an integral characteristic of multicomponent value; substantiation of type, construction, and parameters of drainage-accumulation networks have been developed. The technological schemes of land-reclamation measures realization at the stage of project, exploitation, and conservation are worked out and their environmental and economic efficiency has been proved in production conditions.
APA, Harvard, Vancouver, ISO, and other styles
4

An, Mianlei, Lin Ding, Kai Zhong, Ruijun Liu, Wen Tang, and Junbao Tao. "Design and Implementation of Salvage Device Structure with Camera Detection Function." In Advances in Transdisciplinary Engineering. IOS Press, 2024. http://dx.doi.org/10.3233/atde240600.

Full text
Abstract:
The drilling working is often needed in mountainous and woodland areas, such as pile foundation construction and electric power laying in mountains. They are difficult to drill manually by workers, but mechanical drilling is easier to achieve. However, at present, it is also difficult to construct and achieve working in the drilling process of wheel walk drilling machine to lead to the result of the less application for other fields. In this paper, a new process scheme is proposed to solve the working technology problem in the drilling process, which can make the platform more flexible and use
APA, Harvard, Vancouver, ISO, and other styles
5

Boiko, Yana. "MODELLING AS A METHOD OF COGNITION IN THE HUMANITIESMODELLING AS A METHOD OF COGNITION IN THE HUMANITIES." In Development of scientific, technological and innovation space in Ukraine and EU countries. Publishing House “Baltija Publishing”, 2021. http://dx.doi.org/10.30525/978-9934-26-151-0-1.

Full text
Abstract:
Modelling of physical objects, processes, and phenomena, i.e. their study by creating their copies (models), which reproduce their characteristic properties, is a powerful tool used by researchers while studying the systems of different nature. The purpose of the paper is to demonstrate the genesis of modelling as an effective method of cognition in the framework of the anthropocentric paradigm of research. The solution of such research problems determines the logic of the presentation of the studied material in the paper: systematisation of achievements in the theory and practice of modelling
APA, Harvard, Vancouver, ISO, and other styles
6

Brooks, Laurence, Christopher J. Davis, and Mark Lycett. "Investigating the Interdependence of Organisations and Information Systems." In Issues and Trends in Technology and Human Interaction. IGI Global, 2007. http://dx.doi.org/10.4018/978-1-59904-268-8.ch013.

Full text
Abstract:
Using Personal Construct Theory (PCT) as an underlying conceptual frame, this chapter explores the interdependence of organisations and information systems. Two PCT related techniques - Repertory Grid Analysis (RepGrid) and Cognitive Mapping (CM) - were used to investigate the dynamics of this interaction. Changing business models and information technologies were investigated in two distinct work settings: in each case, the technique contributed substantial insight into the role of information systems in that context. The analysis shows that the techniques have matured to a stage where they p
APA, Harvard, Vancouver, ISO, and other styles
7

Malinoshevska, Kateryna. "STRATEGY OF STATE SUPPORT OF AGRICULTURAL ENTERPRISES." In European vector of development of the modern scientific researches. Publishing House “Baltija Publishing”, 2021. http://dx.doi.org/10.30525/978-9934-26-077-3-33.

Full text
Abstract:
The purpose of agricultural enterprises is to improve the quality of domestic products, their competitiveness, food security, development of genetics and breeding, reproduction of land fertility, digitalization, which is impossible without economic transformation, management decisions, the introduction of technological processes for the long-term development of agriculture. The agro-industrial complex plays an important role in the development of the economy as a whole and performs a social function, ensures food security of regions and employment of people living in rural areas, so the qualit
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Constructive technological scheme"

1

Delitsyn, Leonid, Mikhail Sulman, Ruslan Kulumbegov, Oleg Popel, and Alexander Sidorov. "UTILIZATION OF ASH FROM THE COMBUSTION OF KUZNETSK AND EKIBASTUZ COALS." In 24th SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/4.1/s18.44.

Full text
Abstract:
One of the promising areas of utilization of solid technogenic waste from energy generation is their processing to produce alumina, the production of which is accompanied by the formation of by-products that can be used to produce belite sludge (2CaO�SiO2). The basic schemes of purification of the initial ash from carbon and iron oxides are proposed. Using the example of ash from coal burning in the Ekibastuz basin, the possibility of obtaining two grades of belite sludge is shown. Up to 1.5-1.8 tons of belite sludge can be obtained per ton of recycled ash (depending on its quality), which can
APA, Harvard, Vancouver, ISO, and other styles
2

Skuryatin, Nikolai, Alexander Novitsky, Anatoly Zhiltsov, and Evgeniy Soloviev. "Development of constructive-technological scheme of parking for agricultural machinery." In 18th International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, 2019. http://dx.doi.org/10.22616/erdev2019.18.n369.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Knyazev, A., Mikhail Drapalyuk, Petr Popikov, Vladimir Uskov, Dmitriy Goncharov, and E. Orel. "KINEMATICS AND DYNAMICS OF FOREST DISK PLOW WITH HYDRAULICALLY DRIVEN REAR CUTTING DISKS DURING STRIP TILLAGE IN CLEARCUTS." In PHYSICAL BASIS OF SCIENCE-INTENSIVE TECHNOLOGIES. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2024. https://doi.org/10.58168/pbst_114-119.

Full text
Abstract:
The paper presents a new constructive-technological scheme of forest disk plow with hydraulic drive of rear cut-out disks. The mathematical model of the working process of the hydraulic drive of the disk working body at strip tillage has compiled and solved. By justifying the parameters of the hydraulic drive of the rear cut-out disk working bodies, it is possible to achieve an increase in the quality indicators of cutting of sodden layers of forest soil from the front disks of the plow.
APA, Harvard, Vancouver, ISO, and other styles
4

Radulescu, Victorita. "A Solution for Experimental Modeling the Axial Fans With High Efficiency and Reduced Noise." In ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/fedsm2020-20442.

Full text
Abstract:
Abstract Present paper describes some experimental results obtained for modeling an axial fan with newly designed blade profiles, having high efficiency, low vibrations and noise. The axial fan was firstly designed by computational method, during a research project with our industrial partner SAVEB SA. One of the company objectives is represented by the production of the axial industrial fans, dedicated to different users to eliminate the smoke and the air pollutants from industrial halls, according to their specific needs. In the beginning, are presented some aspects of the theoretical aspect
APA, Harvard, Vancouver, ISO, and other styles
5

Schlenger, J., T. Yeung, S. Vilgertshofer, J. Martinez, R. Sacks, and A. Borrmann. "A Comprehensive Data Schema for Digital Twin Construction." In The 29th EG-ICE International Workshop on Intelligent Computing in Engineering. EG-ICE, 2022. http://dx.doi.org/10.7146/aul.455.c194.

Full text
Abstract:
Lean construction, originating from lean management, aims to proactively improve the overall efficiency of construction processes. This requires continuous assessment of performance to identify key problems, which allows continuous improvement of construction processes. Novel digital twin approaches form an excellent technological foundation for performance assessment through regular updates with product and process information directly from the construction site. While some publications favour a schema-less approach to digital twins, we argue that well-defined data structures are required to
APA, Harvard, Vancouver, ISO, and other styles
6

Holevo, A. A., and V. M. Misiuchenka. "ENVIRONMENTAL IMPACT DURING THE CONSTRUCTION OF THE PETRIKOV MINING AND PROCESSING COMPLEX." In SAKHAROV READINGS 2021: ENVIRONMENTAL PROBLEMS OF THE XXI CENTURY. International Sakharov Environmental Institute of Belarusian State University, 2021. http://dx.doi.org/10.46646/sakh-2021-2-362-368.

Full text
Abstract:
The analysis of the main impacts on the environment during the construction of a mining and processing complex in Petrikov was carried out. The analysis showed that the most significant impact was on atmospheric air and groundwater. The scattering calculation showed that the greatest influence was exerted by nitrogen (II) oxide, nitric acid, potassium chloride, carbon oxide, unsaturated hydrocarbons, saturated aliphatic hydrocarbons C1-C10. The volume of surface runoff and the volume of chloride removal from the industrial site in the event of an emergency were also calculated. As water protec
APA, Harvard, Vancouver, ISO, and other styles
7

Samutin, N. M., and N. N. Butorina. "Modern Approaches to the Disposal of Construction and Municipal Waste at the Regional Level." In ECOLOGICAL AND ECONOMIC SECURITY OF REGIONS. Institute of Economics of the Ural branch of RAS, 2023. http://dx.doi.org/10.17059/eebr-2023-5.

Full text
Abstract:
The present study analyzed the dynamics of the formation and disposal of construction waste in the Russian Federation and Sverdlovsk region in 2016–2021. A comparative assessment of the amount of construction waste at ownerless facilities in the Sverdlovsk region was performed. It was established that the amount of accumulated construction waste at ownerless facilities significantly exceeds the amount reported annually at the end of the year. An album of standard technological solutions for the implementation of "pilot" construction and municipal projects in Russian regions was proposed. Accor
APA, Harvard, Vancouver, ISO, and other styles
8

Gelfgat, Mikhail Yakovlevich, and Aleksandr Sergeevich Geraskin. "Deep Geothermal Well Construction Problems and Possible Solutions." In SPE Russian Petroleum Technology Conference. SPE, 2021. http://dx.doi.org/10.2118/206616-ms.

Full text
Abstract:
Abstract The geothermal energy is one of the most promising sources of electricity on the planet; it is available almost anywhere on the continents and resources are inexhaustible. The realization of these possibilities requires solving the problems of deep wells (6-10 km) construction, when the lower horizons are practically impermeable crystalline basement rocks. For effective use of the Earth's heat, bottomhole temperatures must be within 200-300°C. World experience of such deep wells construction is very limited, some examples are given in this work. Known schemes of geothermal energy appl
APA, Harvard, Vancouver, ISO, and other styles
9

Kanev, Valeriy. "Solution Modeling in System Coordination of Objectives and Resourcing Linear Business Processes." In Contemporary Issues in Business, Management and Education. Vilnius Gediminas Technical University, 2017. http://dx.doi.org/10.3846/cbme.2017.104.

Full text
Abstract:
The paper deals with the analytical approach to reaching compromises in coordinating objectives and resourcing business processes, algorithms and software for generating strategies – compromises for situational analysis. Unlike traditional schemes it is suggested using a vector-mode display to analytically manage both resources in a risk-tolerant way and signaling event occurrence dates in a technologically practicable schedule of a net model. Model-methodical support of linear business processes realization programs can be used for the algorithmic control of objectives coordination and resour
APA, Harvard, Vancouver, ISO, and other styles
10

Kravtsov, Vladimir, Valery Seskov, Pavel Lapatin, and Sergey Yakunenko. "Soil Improvement Using Rigid Large Elements in the Engineering Practice of the Republic of Belarus." In The 13th Baltic Sea Region Geotechnical Conference. Vilnius Gediminas Technical University, 2016. http://dx.doi.org/10.3846/13bsgc.2016.025.

Full text
Abstract:
The results of research and development of methods for the calculation, design and practical application of a method for technique of improvement soft soil bases for slab foundations with the use of rigid large elements are reported. The optimal percentage of rigid elements, structural characteristics of improved soils (increment and diameter of rigid elements) are presented and principles for their calculation and design are given. As exemplified by a specific construction site, it is demonstrated that technological schemes for the arrangement of improved soils, developed by RUE Institute Bel
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Constructive technological scheme"

1

Mudryj, Igor, and Igor Ivaneіko. The Use of Small Drilling Equipment in the Arrangement of Pile Foundations in Compressed Conditions. Intellectual Archive, 2022. http://dx.doi.org/10.32370/ia_2022_09_11.

Full text
Abstract:
The procedure for finding technological parameters for the installation of pile foundations with small-sized drilling rigs, when developing design and technological documentation in compressed construction conditions, is considered. Methodological approaches to the choice of technologies for the construction of pile foundations are shown, depending on the dimensions of the small-sized drilling machines used, the required area for their placement, storage areas, and auxiliary equipment. in compressed conditions of construction. The existing normative documents do not set out separate requiremen
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Constructive technological scheme' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography