Academic literature on the topic 'Contact Point Determination'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Contact Point Determination.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Contact Point Determination"

1

HASS, NIR, D. ILZYCER, G. DEUTSCHER, G. DESGARDIN, I. MONOT та M. WEGER. "POINT CONTACT SPECTROSCOPY IN ORIENTED YBa2Cu3O7−δ". International Journal of Modern Physics B 07, № 01n03 (1993): 127–30. http://dx.doi.org/10.1142/s0217979293000287.

Full text
Abstract:
We report point contact spectroscopy measurements on YBa 2 Cu 3 O 7−δ thin films and textured bulk ceramics. The I(V) curves measured along the Copper-Oxygen (ab) plane direction are characteristic of the Andreev reflection phenomenon, with a sharp break at the gap edge. This allows a rather precise determination of the (in plane) gap, Δ = 20 mev . Subgap structure suggests the existence of a smaller gap for some orientations in the (ab) plane, of the order of 12 mev. The data also enabled us to set a lower bound to the inplane Fermi velocity in YBa 2 Cu 3 O 7−δ: v F ≥ 7 × 107 cm/sec . The val
APA, Harvard, Vancouver, ISO, and other styles
2

Tsaprounis, C. J., and N. Aspragathos. "Contact Point identification in robot assembly strategies under uncertainty." Robotica 16, no. 6 (1998): 679–90. http://dx.doi.org/10.1017/s0263574798000605.

Full text
Abstract:
In this paper a method for the reduction of the uncertainties in robotised assembly process is presented. The generated assembly strategies are based on the determination of the contact points. The assembly task is divided in two main subtasks, the initial and the main. To reduce the uncertainty of the process a deliberate misalignment of the peg is used.This paper is focused on the determination of the position and the forces at the contact points between the peg and hole under uncertainty. The available data are the force signal retrieved from the force sensor, the geometry of the assembly p
APA, Harvard, Vancouver, ISO, and other styles
3

Katkhouda, Kamal, Daniela Schubert, Andreas Grohe, and Peter Schaaf. "Quick Determination of Specific Contact Resistance of Metal–Semiconductor Point Contacts on Highly Doped Silicon." IEEE Journal of Photovoltaics 5, no. 1 (2015): 299–306. http://dx.doi.org/10.1109/jphotov.2014.2362302.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Moseson, Alexander J., Sandip Basu, and Michel W. Barsoum. "Determination of the effective zero point of contact for spherical nanoindentation." Journal of Materials Research 23, no. 1 (2008): 204–9. http://dx.doi.org/10.1557/jmr.2008.0012.

Full text
Abstract:
Accurate determination of the “zero point,” the first contact between an indenter tip and sample surface, has to date remained elusive. In this article, we outline a relatively simple, objective procedure by which an effective zero point can be determined accurately and reproducibly using a nanoindenter equipped with a continuous stiffness measurement option and a spherical tip. The method relies on applying a data shift, which ensures that curves of stiffness versus contact radius are linear and go through the origin. The method was applied to fused silica, sapphire single crystals, and polyc
APA, Harvard, Vancouver, ISO, and other styles
5

Litvin, F. L., J. S. Chen, J. Lu, and R. F. Handschuh. "Application of Finite Element Analysis for Determination of Load Share, Real Contact Ratio, Precision of Motion, and Stress Analysis." Journal of Mechanical Design 118, no. 4 (1996): 561–67. http://dx.doi.org/10.1115/1.2826929.

Full text
Abstract:
A loaded gear drive with point contact between tooth surfaces is considered. The principal curvatures and directions at a current point of tangency, the contact paths on tooth surfaces, and the transmission errors caused by misalignment we consider as known. In this paper the following topics are covered: (1) Determination of the contact force and its distribution over the contact ellipse; (2) Determination of the tooth deflection, the load share, and the real contact ratio; and (3) Stress analysis by application of the finite element method. The discussed approach is illustrated with a numeri
APA, Harvard, Vancouver, ISO, and other styles
6

KUPKA, M., and O. HUDÁK. "THEORY OF POINT CONTACT SPECTRA FOR SYSTEM METAL TIP-SUPERCONDUCTOR WITH INTERNAL JOSEPHSON JUNCTION." Modern Physics Letters B 03, no. 10 (1989): 789–94. http://dx.doi.org/10.1142/s0217984989001242.

Full text
Abstract:
We report on the calculations of current-voltage characteristics and dynamical resistivity for a model system (series connected point contact metal — superconductor and Josephson junction of the S-N-S type) as a function of applied voltage. Calculated shape of dV/dI as a function of V shows some qualitative agreement with measured curves on real low-resistivity point contacts of the type metal tip – ceramic superconductor (LaBaCuO, YBaCuO). Method for determination of the energy gap is proposed.
APA, Harvard, Vancouver, ISO, and other styles
7

Jakob, M., J. Appenzeller, J. Knoch, H. Stahl, and B. Lengeler. "Experimental determination of the Andreev reflection probability using ballistic point contact spectroscopy." Materials Science and Engineering: C 15, no. 1-2 (2001): 63–65. http://dx.doi.org/10.1016/s0928-4931(01)00236-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ji, Y., G. J. Strijkers, F. Y. Yang, et al. "Determination of the Spin Polarization of Half-MetallicCrO2by Point Contact Andreev Reflection." Physical Review Letters 86, no. 24 (2001): 5585–88. http://dx.doi.org/10.1103/physrevlett.86.5585.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chau, Lai-Kwan, and Marc D. Porter. "Surface isoelectric point of evaporated silver films: Determination by contact angle titration." Journal of Colloid and Interface Science 145, no. 1 (1991): 283–86. http://dx.doi.org/10.1016/0021-9797(91)90121-n.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hegedűsová, Lucia, Ladislav Ceniga, and Ján Dusza. "Bending and Contact Strength of Monolithic Ceramic Materials." International Journal of Damage Mechanics 21, no. 2 (2011): 293–305. http://dx.doi.org/10.1177/1056789511406319.

Full text
Abstract:
The article deals with the determination of strength of monolithic ceramic materials by mechanical tests, in bending and contact modes, simulated by a four-point bending test and single-cycle contact test using rollers or spheres, respectively. In general, the determination of strength of ceramic materials results from statistical methods, usually represented by the Weibull analysis comprising of the determination of the characteristic strength σ0 and the Weibull modulus m. Accordingly, the characteristic strength σ0,bend and σ0,cont as well as the Weibull moduli mbend and mcont, related to th
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Contact Point Determination"

1

Mencek, Hakan. "An Algorithm To Resolve The Optimal Locomotion Problem Of Modular Robots." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/3/12609065/index.pdf.

Full text
Abstract:
In this study, a novel optimal motion planning algorithm is developed for the locomotion of modular robots. The total energy consumption of the robot is considered to be the optimization criteria. In order to determine the energy consumption of the system, the kinematic and dynamic analyses of the system are performed. Due to the variable number of modules in the system, a recursive formulation is developed for both kinematic and dynamic analyses. Coulomb&#039<br>s static and dynamic friction models are used to model the frictional forces at the contact points. In modular robot locomotion, th
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Contact Point Determination"

1

A, Shogrin Bradley, Lewis Research Center, and United States. National Aeronautics and Space Administration., eds. Experimental determination of load carrying capacity of point contacts at zero entrainment velocity. National Aeronautics and Space Administration, Lewis Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pitson, Tony. Hume, Free Will, and Moral Responsibility. Edited by Paul Russell. Oxford University Press, 2014. http://dx.doi.org/10.1093/oxfordhb/9780199742844.013.18.

Full text
Abstract:
This chapter aims to relate Hume’s discussion of liberty and necessity to central themes in his philosophy, including causation, the self, the distinction between virtue and vice, and naturalism as a response to skepticism. From this perspective, many points of contact with contemporary discussions of free will and moral responsibility emerge. Hume’s account of moral responsibility, with its implications for the conditions under which ascriptions of responsibility are withheld or qualified, is considered in detail. The notion of agent autonomy is linked to Hume’s distinction between the calm a
APA, Harvard, Vancouver, ISO, and other styles
3

Oklopcic, Zoran. Beyond the People. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198799092.001.0001.

Full text
Abstract:
Who is ‘the people’? How does it exercise its power? When is the people entitled to exercise its rights? From where does that people derive its authority? What is the meaning of its self-government in a democratic constitutional order? For the most part, scholars approach these questions from their disciplinary perspectives, with the help of canonical texts, and in the context of ongoing theoretical debates. Beyond the People is a systematic and comprehensive, yet less disciplinarily disciplined study that confronts the same questions, texts, and debates in a new way. Its point of departure is
APA, Harvard, Vancouver, ISO, and other styles
4

Skiba, Grzegorz. Fizjologiczne, żywieniowe i genetyczne uwarunkowania właściwości kości rosnących świń. The Kielanowski Institute of Animal Physiology and Nutrition, Polish Academy of Sciences, 2020. http://dx.doi.org/10.22358/mono_gs_2020.

Full text
Abstract:
Bones are multifunctional passive organs of movement that supports soft tissue and directly attached muscles. They also protect internal organs and are a reserve of calcium, phosphorus and magnesium. Each bone is covered with periosteum, and the adjacent bone surfaces are covered by articular cartilage. Histologically, the bone is an organ composed of many different tissues. The main component is bone tissue (cortical and spongy) composed of a set of bone cells and intercellular substance (mineral and organic), it also contains fat, hematopoietic (bone marrow) and cartilaginous tissue. Bones a
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Contact Point Determination"

1

Karelina, M. U., T. A. Balabina, and A. N. Mamaev. "Determination of Point of Application of Tangent Force in Contact of Wheel with Drum and Its Arm Relative to Wheel Axis." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-54814-8_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Navarro, César, Chidentree Treesatayapun, and Arturo Baltazar. "Determination of the Instantaneous Initial Contact Point on a Parallel Gripper Using a Multi Input Fuzzy Rules Emulated Network Controller with Feedback from Ultrasonic and Force Sensors." In Advances in Artificial Intelligence. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-37807-2_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hopkins, David. "Determination or Forfeiture Clauses." In Wilmot-Smith on Construction Contracts. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198832805.003.0013.

Full text
Abstract:
This chapter deals with forfeiture clauses, which are designed to provide a contractually regulated early end to the obligations of the parties under the contract. It explains how a forfeiture clause may allow determination for cause or determination without cause. It also points out that a forfeiture clause will not exclude common law rights to terminate and subsist in parallel to the forfeiture clause. This chapter assesses the standard forms of contract that often refer to forfeiture clauses as termination clauses and sometimes use the language of rescission. It defines rescission as the unwinding of a contract back to the point of its inception.
APA, Harvard, Vancouver, ISO, and other styles
4

Colin, Edelman, and Burns Andrew. "7 Applicable Law and Jurisdiction." In The Law of Reinsurance. Oxford University Press, 2021. http://dx.doi.org/10.1093/law/9780198870937.003.0007.

Full text
Abstract:
This chapter explores the law applicable to reinsurance. Section 2(1) of the Contracts (Applicable Law) Act 1990 provides for the incorporation of the 1980 Rome Convention on the law applicable to contractual obligations into the law of the United Kingdom. Article 1(4) of the Convention expressly provides that reinsurance contracts, unlike contracts of insurance, are subject to the rules of the Convention. However, the Convention does not have retrospective effect and therefore only applies to contracts entered into after April of 1991 when the Convention came into force. For a contract concluded before that date, the determination of its proper law depended and still depends on common law principles. At common law, the starting point is to investigate whether the parties have expressly selected a body of law at the time of contracting or whether such selection can be implied from the express terms of the contract. If the court is unable to ascertain the governing law from the contract it will then look to determine with which system of law the contract has the closest connection.
APA, Harvard, Vancouver, ISO, and other styles
5

Socher, Johannes. "The Soviet Doctrine on the Right to Self-Determination Revisited." In Russia and the Right to Self-Determination in the Post-Soviet Space. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780192897176.003.0002.

Full text
Abstract:
This chapter provides a critical rereading of the history of self-determination by revisiting the Soviet Union’s contribution to its evolution from a political principle to an international legal right. It argues that the history of the right to self-determination as a concept of international law starts with the Russian Revolution and not with Wilson’s famous Fourteen Points. Moreover, it highlights that the Soviet Union was the decisive force behind the codification of the right to self-determination in international legal instruments following the Second World War, while at the same time it modified or even perverted its meaning and content in its sphere of influence, most notoriously through the later so-called Brezhnev Doctrine. A discussion on how self-determination was theorized and debated in Soviet international law scholarship up until the collapse of the Soviet Union completes the picture.
APA, Harvard, Vancouver, ISO, and other styles
6

Bollen, Peter. "Using Natural Language Modeling for Business Simulation." In Simulation and Modeling. IGI Global, 2008. http://dx.doi.org/10.4018/978-1-59904-198-8.ch004.

Full text
Abstract:
Natural language modeling (NLM) is a conceptual modeling language that can be used for requirements determination for business application systems. In this chapter we will show how the NLM methodology for requirements determination can be extended to serve as a blueprint for business (or management) simulation by providing an initial model for creating a business simulation. We will do this by defining the content of the communication documents for runtime management and we will subsequently show how this meta-UoD can be incorporated into an application UoD. This allows us to capitalize on conceptual models in a business that have been created for requirements determination by extending them with the conceptual model of runtime management. Subsequently, we will incorporate the simulation requirements into the latter UoD and we will give some guidelines on how the conceptual models for the “real life” runtime application can serve as a starting point for the conceptual sub-models for the simulation UoD.
APA, Harvard, Vancouver, ISO, and other styles
7

Crosbie, Christopher. "Fixing Moderation: Titus Andronicus and the Aristotelian Determination of Value." In Revenge Tragedy and Classical Philosophy on the Early Modern Stage. Edinburgh University Press, 2019. http://dx.doi.org/10.3366/edinburgh/9781474440264.003.0003.

Full text
Abstract:
This chapter draws on Aristotle’s Nicomachean Ethics to argue that Shakespeare structures Titus Andronicus around the variable ways the concept of an ethical mean —the theoretical point of moral equilibrium between two diametrically opposed, immoral extremes — finds instantiation in embodied action, depending upon context. By embedding within this grotesque drama a set of prevailing ontological assumptions about the nature of genuine moderation, Shakespeare creates a narrative of retribution that – even as it horrifies – resonates as appropriate and that aligns with a predicating notion of value recognized by both Romans and Goths – even if, at key moments in their abrogation of it – as indeed integral to the very mechanics governing the world they inhabit.
APA, Harvard, Vancouver, ISO, and other styles
8

Nicholson, Rowan. "Conclusion." In Statehood and the State-Like in International Law. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198851219.003.0007.

Full text
Abstract:
The conclusion ties together the threads of the book and identifies respects in which its focus on state-like entities, rather than on states alone, has proven rewarding. A summary of the theory of statehood presented in the book is provided here in point form. Its key concepts are the effectiveness and recognition norms; the premature-recognition, collective-non-recognition, and unlawful-effectuation exceptions; the right to external self-determination; the definitions of ‘state’ and ‘state-in-context’; and the idea that international law derives validity from a basic self-reproducing circle of norms that includes norms about statehood. It is suggested that the term ‘nation’ evokes the variety of state-like entities to which international law applies.
APA, Harvard, Vancouver, ISO, and other styles
9

Hyett, Brian, and Sanjiv Chopra. "Liver Disease." In The Brigham Intensive Review of Internal Medicine. Oxford University Press, 2014. http://dx.doi.org/10.1093/med/9780199358274.003.0073.

Full text
Abstract:
An ideal liver function test would be one that could detect minimal liver disease, point to a particular liver function disorder, and be capable of reflecting the severity of the underlying problem. Because no such laboratory test exists, the term, liver function tests, generally refers to a group of serologic tests that evaluate different aspects of liver function; it is a term that is best utilized keeping in mind the clinical context and in conjunction with serial determinations to ascertain the evolution of the hepatic disorder. In addition, cholangiography, ultrasound, computed tomography (CT), magnetic resonance imaging (MRI), and histologic assessment (via liver biopsy) are often utilized to delineate the nature of the liver disease and as such may also be viewed in the broad context as tests of liver function.
APA, Harvard, Vancouver, ISO, and other styles
10

Frajzyngier, Zygmunt, and Marielle Butters. "Methodology." In The Emergence of Functions in Language. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198844297.003.0002.

Full text
Abstract:
A prerequisite for the discovery of functions is the determination of formal means of coding within the language. The discovery of functions and motivations for the emergence of functions is based on the claim that each function is a member of some functional domain. A determining characteristic of a function is its contrast with other functions within the domain. The chapter postulates that a distinction should be made between structural functions that allow the listener to identify the types of constituents in the clause and functions encoding meaning. The chapter illustrates the discovery of the functions of the following: the ‘progressive’ and the ‘perfect’ forms in English; ‘reflexives’ in some Indo-European languages; point of view of the subject; and goal orientation in several languages; pronouns in several languages.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Contact Point Determination"

1

Sulaiman, Hamzah Asyrani, Mohd Azlishah Othman, Mohamad Harris Bin Misran, Abd Majid Bin Darsono, Abdullah Bade, and Mohd Harun Abdullah. "Closest features determination between range point of contact." In 2014 International Symposium on Technology Management and Emerging Technologies (ISTMET). IEEE, 2014. http://dx.doi.org/10.1109/istmet.2014.6936562.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shell, Dylan A., and Evan Drumwright. "Precise generalized contact point and normal determination for rigid body simulation." In the 2009 ACM symposium. ACM Press, 2009. http://dx.doi.org/10.1145/1529282.1529749.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Emnett, Hannah, Matthew Graff, and Mitra Hartmann. "A Novel Whisker Sensor Used for 3D Contact Point Determination and Contour Extraction." In Robotics: Science and Systems 2018. Robotics: Science and Systems Foundation, 2018. http://dx.doi.org/10.15607/rss.2018.xiv.059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yuen, Shelten G., Daniel Rudoy, Robert D. Howe, and Patrick J. Wolfe. "Bayesian Changepoint Detection Through Switching Regressions: Contact Point Determination in Material Indentation Experiments." In 2007 IEEE/SP 14th Workshop on Statistical Signal Processing. IEEE, 2007. http://dx.doi.org/10.1109/ssp.2007.4301227.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Onda, Hiromu, Woo-Keun Yoon, Kousei Kitagaki, and Takashi Suehiro. "Visualization and Analysis of "Pseudo-Contact Point" Loci for Determination of a Sensing Parameter." In IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. IEEE, 2006. http://dx.doi.org/10.1109/iecon.2006.347899.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Luo, Lianzhen, and Meyer Nahon. "Determination of the Interference Geometry Between Two Convex Objects." In ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99616.

Full text
Abstract:
The determination of the interference geometry between two arbitrary objects is an essential problem encountered in the simulation of continuous contact dynamics and haptic interactions. In these applications, with known material properties, the interbody contact force is only a function of the interference geometry between two objects. Here a theoretical basis and algorithms for the calculation of the interference geometry, such as overlap region, contact area and normal, and interference volume, are presented. Two methods to obtain the contact area and normal are analyzed: an area-weighted m
APA, Harvard, Vancouver, ISO, and other styles
7

Poliscuk, Radek, Michal Vaverka, Martin Vrbka, Ivan Krupka, and Martin Hartl. "Pressure Distribution Within EHD Point Contacts Based on Measured Film Thickness." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13546.

Full text
Abstract:
Surface topography significantly influences the behavior of lubricated contacts between highly loaded machine elements. Most oil- or grease- lubricated machine elements such as gears, rolling bearings, cams and traction drives operate in mixed lubrication conditions and the lubricant film thickness is directly related to the main practical performance parameters such as function, wear, contact fatigue and scuffing. For determination wear and especially contact fatigue, the values and distribution of the pressure in rolling contact are required. The theoretical studies usually involve the numer
APA, Harvard, Vancouver, ISO, and other styles
8

Djuric, Snezana, Laszlo Nagy, and Mirjana Damnjanovic. "Determination of the acting point of contact force in a foot of humanoid robot using inductive displacement sensor." In 2009 7th International Symposium on Intelligent Systems and Informatics (SISY). IEEE, 2009. http://dx.doi.org/10.1109/sisy.2009.5291120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Vrbka, M., M. Vaverka, R. Poliscuk, I. Krupka, and M. Hartl. "Pressure Calculation From Experimentally Evaluated Lubricant Thickness Within EHL Contacts." In ASME/STLE 2007 International Joint Tribology Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ijtc2007-44076.

Full text
Abstract:
This paper is concerned with elastohydrodynamic lubrication, especially determination of lubricant film thickness and contact pressure within a point contact of friction surfaces of machine parts. A new solution technique for numerical determination of contact pressure is introduced. Direct measurement of contact pressure is very difficult. Hence, input data of lubricant film thickness obtained from the experiment based on colorimetric interferometry are used for calculation of pressure using the inverse elasticity theory. The algorithm is enhanced by convolution in order to increase calculati
APA, Harvard, Vancouver, ISO, and other styles
10

Tsay, Der Min, Meng Hung Huang, and Hui Chun Ho. "Determination of Follower Motions Using Measured Cam Profiles." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/mech-5826.

Full text
Abstract:
Abstract A versatile, systematic procedure that can be used to determine follower motions from measured discrete planar cam profile data is presented. Based on the geometric relationship at the contact point between a cam and its follower system, the reverse functions for planar cams with various types of followers are established. Then, a periodic B-spline approximation in a form of least squares is introduced to approximate the measured data and to generate the data derivatives required in finding their corresponding follower motions. The accuracy and reliability of this method is verified,
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!