Log in

Relevant bibliographies by topics / Cooled water / Journal articles

To see the other types of publications on this topic, follow the link: Cooled water.

Journal articles on the topic 'Cooled water'

Author: Grafiati

Published: 4 June 2021

Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Cooled water.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kettleborough, C. F., D. G. Waugaman, and M. Johnson. "The Thermal Performance of the Cross-Flow Three-Dimensional Flat Plate Indirect Evaporative Cooler." Journal of Energy Resources Technology 114, no. 3 (September 1, 1992): 181–86. http://dx.doi.org/10.1115/1.2905939.

Full text

Abstract:

Evaporative coolers consist of two main types: (a) the direct evaporative cooler in which water mixes with the air to be cooled; and (b) the indirect evaporative cooler in which water is sprayed into alternate passages cooling the secondary airflow, which in turns cools the primary flow which then passes to the building to be cooled. A three-dimensional numerical evaluation of the indirect cooler is given. Energy and mass balance equations are derived for the primary and secondary flows and the effectiveness is calculated for different variable inlet velocities and compared with experimental values.

APA, Harvard, Vancouver, ISO, and other styles

2

Usmonov, N., Sh Sanayev, and Z. Yusupov. "CALCULATION OF TEMPERATURE OF ROUTINE WATER COOLED IN IRRIGATED LAYERS." Technical science and innovation 2019, no. 3 (September 18, 2019): 249–55. http://dx.doi.org/10.51346/tstu-01.19.3.-77-0036.

Full text

Abstract:

The article describes the developed mathematical model, algorithm and program for calculating the process of cooling the water leaving the evaporative cooler and the final temperature of humid air. The compilation of a mathematical model is based on the analysis of literature data. Practically at all industrial enterprises, technological equipment is cooled by means of circulating water supply systems equipped with evaporative coolers. The article made a choice of a cooling system for air conditioning systems of residential premises. The developed basic design scheme of the evaporative water and air cooler with the irrigated layer is presented, as well as the estimated thermal and material balance. One of the main elements of these devices is a heat-mass transfer nozzle - sprinkler. This article presents the results of mathematical modeling of processes occurring in the volume of the sprinkler evaporator chamber, Raschig rings composed of vertical polymeric materials. Expressions are obtained for determining the values of air temperature based on the calculation of thermal modeling of the process of cooling circulating water in evaporative coolers of the type in question.

APA, Harvard, Vancouver, ISO, and other styles

3

Dumont, G., Ph Fontaine Vive Roux, and B. Righini. "Water-cooled electronics." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 440, no. 1 (January 2000): 213–23. http://dx.doi.org/10.1016/s0168-9002(99)00880-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kim, Hak Min, and Jeong Kuk Yeom. "Numerical Model for Water-Cooled EGR Cooler Performance Improvement." Transactions of the Korean Society of Mechanical Engineers - B 44, no. 1 (January 31, 2020): 61–67. http://dx.doi.org/10.3795/ksme-b.2020.44.1.061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

J,, Venkatesan, Nagarajan G, Seeniraj R. V, and Kumar S. "Mathematical Modeling of Water Cooled Automotive Air Compressor." International Journal of Engineering and Technology 1, no. 1 (2009): 50–56. http://dx.doi.org/10.7763/ijet.2009.v1.9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Cai, Jiejin, Claude Renault, and Junli Gou. "Supercritical Water-Cooled Reactors." Science and Technology of Nuclear Installations 2014 (2014): 1–2. http://dx.doi.org/10.1155/2014/548672.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kirillov, P. L. "Supercritical water cooled reactors." Thermal Engineering 55, no. 5 (May 2008): 361–64. http://dx.doi.org/10.1134/s0040601508050017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Chambers, Jerre Kelly, and Marvin Lawrence Talansky. "AUTOMATED WATER CONTROL FOR WATER COOLED LASERS." Ophthalmic Surgery, Lasers and Imaging Retina 19, no. 2 (February 1988): 142–43. http://dx.doi.org/10.3928/1542-8877-19880201-19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kolhe, Mohan, Du Bin, and Eric Hu. "Water Cooled Concentrated Photovoltaic System." International Journal of Smart Grid and Clean Energy 2, no. 2 (2013): 159–63. http://dx.doi.org/10.12720/sgce.2.2.159-163.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Schulenberg, T., J. Starflinger, P. Marsault, D. Bittermann, C. Maráczy, E. Laurien, J. A. Lycklama à Nijeholt, et al. "European supercritical water cooled reactor." Nuclear Engineering and Design 241, no. 9 (September 2011): 3505–13. http://dx.doi.org/10.1016/j.nucengdes.2010.09.039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Berman, Lonny E., and Michael Hart. "Water jet cooled silicon monochromators." Synchrotron Radiation News 4, no. 1 (January 1991): 22–28. http://dx.doi.org/10.1080/08940889108602599.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

UCHIDA, Shunsuke. "Water Chemistry of Light Water Cooled Reactor Plants⑴." Journal of the Atomic Energy Society of Japan 51, no. 2 (2009): 106–11. http://dx.doi.org/10.3327/jaesjb.51.2_106.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Arun, BS, and V. Mariappan. "Experimental study of an ultrasonic regenerative evaporative cooler for a desiccant cooling system." Building Services Engineering Research and Technology 40, no. 2 (November 2, 2018): 151–75. http://dx.doi.org/10.1177/0143624418810934.

Full text

Abstract:

This paper presents fabrication of an ultrasonic regenerative evaporative cooler, coupled with a desiccant dehumidifier. Ultrasonic regenerative evaporative cooler consists of several sets of a dry channel and a wet channel. A part of the air from the dry channel is redirected into the wet channel where it is cooled by evaporation of water mist from an ultrasonic atomiser. Air flowing through dry channels is pre-cooled by heat transfer between wet and dry channels, without changing its humidity. In this cooler, the conventional hygroscopic layer for wetting the plate surface is replaced with the water mist. It is observed that the performance of the cooling system significantly depends on the channel spacing, channel length, inlet airflow rate and extraction ratio, and marginally depends upon feed water temperature. The room cooling capacity is eminently responsive to both air mass flow rate and extraction ratio. The maximum available room cooling capacity of 339.8 W is obtained for the optimal values of 0.0488 kg/s mass flow rate of air and 0.37 extraction ratio. The prototype achieved wet-bulb effectiveness values as high as 1.15 and delivered more than 10℃ temperature drop. Practical application: An ultrasonic regenerative evaporative cooler can be coupled with a desiccant dehumidification unit for use in hot and humid climate to achieve comfort condition utilising less energy and feed water when compared to the vapour compression refrigeration system. From this prototype researchers and engineers can develop, by combining desiccant regenerators and evaporative coolers which use ultrasonic method for low-temperature dehydration of desiccant substance. Solar thermal energy can also be directly utilised for marginally heating the desiccant substance during the regeneration process. Overall, this system can contribute to the development of energy efficient buildings.

APA, Harvard, Vancouver, ISO, and other styles

14

Bustamante, John G., Alexander S. Rattner, and Srinivas Garimella. "Achieving near-water-cooled power plant performance with air-cooled condensers." Applied Thermal Engineering 105 (July 2016): 362–71. http://dx.doi.org/10.1016/j.applthermaleng.2015.05.065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Hu, H. M., T. S. Ge, Y. J. Dai, and R. Z. Wang. "Experimental study on water-cooled thermoelectric cooler for CPU under severe environment." International Journal of Refrigeration 62 (February 2016): 30–38. http://dx.doi.org/10.1016/j.ijrefrig.2015.10.015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Heo, Ye-Rim, Cheol-Eon Lee, Ju-Yeong Kang, and Jin Joo Choi. "High-Power Water-Cooled RF Load." Journal of Korean Institute of Electromagnetic Engineering and Science 30, no. 6 (June 2019): 445–51. http://dx.doi.org/10.5515/kjkiees.2019.30.6.445.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Baxi, C. B. "Thermal hydraulics of water cooled divertors." Fusion Engineering and Design 56-57 (October 2001): 195–98. http://dx.doi.org/10.1016/s0920-3796(01)00258-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

KAWAKAMI, Isam, Akira NAKAO, and Kenshi FUJITA. "Development of water cooled grate system." Proceedings of the Symposium on Environmental Engineering 2003.13 (2003): 161–63. http://dx.doi.org/10.1299/jsmeenv.2003.13.161.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

KAWAKAMI, Isam, Akira NAKAO, and Kenshi FUJITA. "Development of water cooled grate system." Proceedings of the Symposium on Environmental Engineering 2002.12 (2002): 262–64. http://dx.doi.org/10.1299/jsmeenv.2002.12.262.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Ikeda, Takatoshi. "Soundproof type water cooled engine generator." Journal of the Acoustical Society of America 102, no. 2 (August 1997): 680. http://dx.doi.org/10.1121/1.419919.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Edwards High Vacuum International. "Small diffusion pump now water-cooled." Vacuum 38, no. 3 (January 1988): 195. http://dx.doi.org/10.1016/0042-207x(88)90190-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Chen, X. N., F. Gabrielli, A. Rineiski, and T. Schulenberg. "Boiling water cooled travelling wave reactor." Annals of Nuclear Energy 134 (December 2019): 342–49. http://dx.doi.org/10.1016/j.anucene.2019.06.037.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Vigneault, Clément, Jerry A. Bartz, and Steven A. Sargent. "Postharvest Decay Risk Associated with Hydrocooling Tomatoes." Plant Disease 84, no. 12 (December 2000): 1314–18. http://dx.doi.org/10.1094/pdis.2000.84.12.1314.

Full text

Abstract:

Tomatoes (breaker stage) hydrocooled with a cell suspension of Erwinia carotovora subsp. carotovora containing 50 to 200 mg of free chlorine per liter (ppm) (10°C, pH 7) remained decay free during a 10-day storage at 20°C. Sporadic disease appeared during storage of tomatoes similarly cooled with chlorinated water containing spores of Rhizopus stolonifer. In contrast, when chlorine was omitted from the pathogen suspensions, 50 to 100% of the fruit became diseased. A laboratory-scale shower hydrocooler reduced fruit temperatures from 35 to 15°C within 13.3 min, whereas a flume cooler produced the same temperature reduction in 10.5 min. In both systems, tomatoes increased in weight during cooling, evidence for water uptake. Larger weight increases occurred among tomatoes cooled in the shower than in the flume. An upward instead of downward orientation of stem scars under the shower streams led to significantly larger weight increases, presumably because pores in the stem scar were continuously flooded with water. Tomatoes intermittently submerged in cold water (10 2-min immersions followed by 30-s pauses) absorbed significantly less water than those continuously submerged for 20 min. Hydrocooling appears to be a viable method for rapid cooling of tomatoes. Technical refinements in the hydrocooling process that prevent continuous coverage of fruit surfaces by water should reduce water uptake and the associated risk of pathogen internalization. Maintenance of free chlorine at up to 200 ppm in the cooling water and prevention of direct water pressure on fruit should minimize decay risks. No evidence of phytotoxicity was observed among fruit infiltrated with 200 ppm of chlorine. These tomatoes ripened similarly to those that were not cooled or were cooled in tap water.

APA, Harvard, Vancouver, ISO, and other styles

24

Zhou, Xiong, Er Ping Wan, and Peng Zhang. "Numerical Simulation and Design of Flow Field of Water-Cooled Roller Based on FLUENT." Applied Mechanics and Materials 233 (November 2012): 11–16. http://dx.doi.org/10.4028/www.scientific.net/amm.233.11.

Full text

Abstract:

Water-cooled roller is the core component of the production of negative plate of electrolytic lead, and the thickness and uniformity of negative plate of electrolytic lead is determined by flow field of internal cooling water of water-cooled roller. In order to catch the distribution of flow field inside of water-cooled roller and guide the design, the moving reference frame technology in fluent software is used to numerically simulate the 3d flow in water-cooled roller and display the characteristics and state of the flow inside the water-cooled roller Intuitive. The optimal aperture of water hole is obtained through the contrastive analysis of simulation of different apertures of water holes. The performance of water-cooled prototype meets the requirements of field investigation, also the thickness and uniformity of negative plate of electrolytic lead meet production requirement.

APA, Harvard, Vancouver, ISO, and other styles

25

Huber, E., L. P. Soares, B. A. M. Carciofi, H. Hense, and J. B. Laurindo. "Vacuum Cooling of Cooked Mussels (Perna perna)." Food Science and Technology International 12, no. 1 (February 2006): 19–25. http://dx.doi.org/10.1177/1082013206062387.

Full text

Abstract:

Mussels pass through a thermal treatment during industrial processing with hot water or steam and then are pre-cooled before the manual extraction of the meat. This pre-cooling is classically accomplished by the immersion of the cooked mussels in cold water. In this work, vacuum cooling of mussels after the cooking stage was used as a technique to quickly decrease the product temperature and to avoid a possible microbial contamination by the cooling water or by manipulation. In about 3 minutes, mussels were cooled from about 90 °C to 20 °C. The relative weight loss during the vacuum cooling of the whole sample (meat and shell) was about 8% of the initial sample’s weight, for temperatures drop cited above. In this way, there was a 8.7 0.26 °C temperature drop for each 1% of weight loss. For separated meat (without shell), the ratio was 7.5 0.30 ºC per 1% weight loss, which agreed with the literature for vacuum cooling of meats in general. A simple numerical simulation was able to determine weight loss during the vacuum cooling process, providing data that agreed very well with experimental results. The vacuum cooling technique is a promising alternative for processing pre-cooked mussels, because process time is shortened and cross-contamination risk is significantly reduced in the cooling stage. The water loss is not a serious problem when the cooled mussels are canned in brine.

APA, Harvard, Vancouver, ISO, and other styles

26

Chambers, Jerre Kelly, and Marvin Lawrence Talansky. "Water Pressure and Flow Regulation for Water-cooled Lasers." Ophthalmic Surgery, Lasers and Imaging Retina 19, no. 5 (May 1988): 359–62. http://dx.doi.org/10.3928/1542-8877-19880501-15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Supriya, Jadhav. "Performance Investigation of Household Refrigerator Using Air-Cooled and Water-Cooled Condenser." International Journal for Research in Applied Science and Engineering Technology 7, no. 6 (June 30, 2019): 1084–88. http://dx.doi.org/10.22214/ijraset.2019.6187.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Luboń, Wojciech, Grzegorz Pełka, Mirosław Janowski, Leszek Pająk, Michał Stefaniuk, Jarosław Kotyza, and Paweł Reczek. "Assessing the Impact of Water Cooling on PV Modules Efficiency." Energies 13, no. 10 (May 12, 2020): 2414. http://dx.doi.org/10.3390/en13102414.

Full text

Abstract:

The article presents the results of research on the efficiency of photovoltaic (PV) modules cooled with water. The aim of the experiment was to improve the working conditions of solar modules. A temperature decrease was obtained for the PV module by pouring cool tap water onto the upper surface of the modules, either in imitation of rain or as a water film. The power of the cooled and non-cooled devices were then compared. The temperature of the cooled modules dropped to almost 25 °C, whilst the temperature of the non-cooled module was 45 °C. The best results were achieved by cooling modules with a water film, since there were no water splashes, and the continuous cooling of the surface leads to a 20% increase in power. During the test, the non-cooled module attained a maximum power of 105.3 W/m2, compared to 125.5 W/m2 for its cooled counterpart. Cooling the module, therefore, resulted in a power increase of 20.2 W/m2. The results of the work may be of particular interest for small installations, especially because it cleans the modules while providing an increase in power.

APA, Harvard, Vancouver, ISO, and other styles

29

Mokry, S. J., I. L. Pioro, A. Farah, and K. King. "ICONE19-43876 UPDATED HEAT TRANSFER CORRELATIONS FOR SUPERCRITICAL WATER-COOLED REACTOR APPLICATIONS." Proceedings of the International Conference on Nuclear Engineering (ICONE) 2011.19 (2011): _ICONE1943. http://dx.doi.org/10.1299/jsmeicone.2011.19._icone1943_330.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Kim, Hak Min, and Jeong Kuk Yeom. "Numerical Study of the Optimal Shape Design of a Water-cooled EGR Cooler." Transactions of the Korean Society of Mechanical Engineers - B 43, no. 7 (July 31, 2019): 463–69. http://dx.doi.org/10.3795/ksme-b.2019.43.7.463.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

., J. N. Devi Sankar. "THERMAL ANALYSIS OF WATER COOLED CHARGE AIR COOLER IN TURBO CHARGED DIESEL ENGINE." International Journal of Research in Engineering and Technology 05, no. 02 (February 25, 2016): 193–97. http://dx.doi.org/10.15623/ijret.2016.0502033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Mostafa, N. Y., S. A. S. El-Hemaly, E. I. Al-Wakeel, S. A. El-Korashy, and P. W. Brown. "Hydraulic activity of water-cooled slag and air-cooled slag at different temperatures." Cement and Concrete Research 31, no. 3 (March 2001): 475–84. http://dx.doi.org/10.1016/s0008-8846(00)00462-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Hosoz, M., and A. Kilicarslan. "Performance evaluations of refrigeration systems with air-cooled, water-cooled and evaporative condensers." International Journal of Energy Research 28, no. 8 (May 21, 2004): 683–96. http://dx.doi.org/10.1002/er.990.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Li Bin, 李斌, 李兰 Li Lan, 焦路光 Jiao Luguang, 刘亮 Liu Liang, 周琼 Zhou Qiong, 袁圣付 Yuan Shengfu, and 刘文广 Liu Wenguang. "Structural optimization of water jet cooled mirror." High Power Laser and Particle Beams 23, no. 4 (2011): 859–62. http://dx.doi.org/10.3788/hplpb20112304.0859.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Kirillov, Pavel Leonidovich. "Water Cooled Reactor VVER SCP (preliminary elaboration)." Izvestiya Wysshikh Uchebnykh Zawedeniy, Yadernaya Energetika 2013, no. 1 (May 2013): 5–14. http://dx.doi.org/10.26583/npe.2013.1.01.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Chusov, I. A., A. S. Shelegov, and O. Yu Kochnov. "Design features of water-cooled research reactors." Nuclear Energy and Technology 2, no. 4 (December 2016): 287–93. http://dx.doi.org/10.1016/j.nucet.2016.11.013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Pridmore, Saxby, and Giap Ang. "A water-cooled transcranial magnetic stimulation coil." Brain Stimulation 1, no. 1 (January 2008): 67. http://dx.doi.org/10.1016/j.brs.2007.08.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Cheng, E. T., R. L. Creedon, C. P. C. Wong, and D.-K. Sze. "A New Water-Cooled Lead Blanket Concept." Fusion Technology 15, no. 2P2A (March 1989): 669–73. http://dx.doi.org/10.13182/fst89-a39774.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Wall, K. H., and I. Davies. "Corrosion control in a water cooled stator." Journal of Applied Chemistry 15, no. 8 (May 4, 2007): 389–92. http://dx.doi.org/10.1002/jctb.5010150808.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Egorov, A. I., M. S. Onegin, and V. V. Pashuk. "Neutron Yield from Water-Cooled Lead Targets." Atomic Energy 97, no. 1 (July 2004): 481–86. http://dx.doi.org/10.1023/b:aten.0000045701.62540.4a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

YAMATO, Fumihide, and Kenichi HASHIZUMI. "Performance Analysis of Water Cooled Heat Sinks." Proceedings of Conference of Chugoku-Shikoku Branch 2004.42 (2004): 259–60. http://dx.doi.org/10.1299/jsmecs.2004.42.259.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

V. Bharambe, Sanjana, Susmit A. Mulay, and Suyash Jadhav. "Design and Analysis of Water Cooled Condenser." International Journal of Mechanical Engineering 4, no. 6 (June 25, 2017): 1–5. http://dx.doi.org/10.14445/23488360/ijme-v4i6p101.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Kotov, V. M., G. A. Vityuk, and A. S. Suraev. "Possibilities of gas-Cooled Water-Moderated Reactors." Atomic Energy 116, no. 1 (May 2014): 6–13. http://dx.doi.org/10.1007/s10512-014-9809-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Koch, Achim, Marc Hiller, and Torsten Borsdorf. "Turbocharger with Water-Cooled Aluminum Turbine Housing." MTZ worldwide 75, no. 11 (October 2014): 30–33. http://dx.doi.org/10.1007/s38313-014-0248-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Charbonnelle, François, Philipe Jouanny, Samer Saab, and Bertrand Gessier. "Water-cooled Condensation for Efficient Energy Management." ATZ worldwide 116, no. 7-8 (July 2014): 10–15. http://dx.doi.org/10.1007/s38311-014-0199-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Silin, V. A., V. M. Zorin, and R. A. Khlopov. "Reactors Cooled by Water at Supercritical Pressure." Power Technology and Engineering 48, no. 3 (September 2014): 222–31. http://dx.doi.org/10.1007/s10749-014-0512-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Rikur, �. A., R. A. Zaripov, E. G. Starchenko, and N. A. Perlov. "Flexible water-cooled inductor for local heating." Chemical and Petroleum Engineering 26, no. 7 (July 1990): 385–87. http://dx.doi.org/10.1007/bf01147371.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Guzonas, D., F. Brosseau, P. Tremaine, J. Meesungnoen, and J. P. Jay-Gerin. "Water Chemistry in a Supercritical Water-Cooled Pressure Tube Reactor." Nuclear Technology 179, no. 2 (August 2012): 205–19. http://dx.doi.org/10.13182/nt12-a14093.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Liu, S., X. Ma, K. Jiang, X. Cheng, K. Huang, H. Neilsion, A. Khodak, and P. Titus. "Conceptual design of the water cooled ceramic breeder blanket for CFETR based on pressurized water cooled reactor technology." Fusion Engineering and Design 124 (November 2017): 865–70. http://dx.doi.org/10.1016/j.fusengdes.2017.02.065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Mohandass, M., Jamuna Venkatesan, and N. Nallusamy. "Influence of Cooling Rate on Fatigue Behaviour of Eutectic Al-Si (A413) Alloy Casting." Applied Mechanics and Materials 787 (August 2015): 490–94. http://dx.doi.org/10.4028/www.scientific.net/amm.787.490.

Full text

Abstract:

In this research work, the effect of cooling rate on fatigue behaviour of eutectic A413 Al-Si cast alloy is investigated. Castings produced by two different cooling rates, water-cooled and air-cooled are studied. The structural morphology of alloy castings was characterized using Inverted Trinocular Metallurgical Optical Microscopy. A Comprehensive tension–tension fatigue test was carried out with a stress ratio of R=0.5, and a sinusoidal waveform under three different mean stress conditions (25%, 50% & 75% of UTS) at room temperature (32°C). The microstructural evaluations show that the eutectic script size is smaller for water-cooled casting than the air-cooled casting. It is also observed that the fatigue life of the water-cooled cast alloy is greater than that of cast alloy produced with conventional air-cooled method.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!