Log in

Relevant bibliographies by topics / Cooling medium

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Cooling medium'

Author: Grafiati

Published: 3 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cooling medium.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cooling medium"

1

Rusnaldy, Norman Iskandar, Yusuf Umardani, Paryanto, and Susilo Adi Widyanto. "Evaluation of the Effect of Application of Air Jet Cooling and Cooled-Air Jet Cooling on Machining Characteristics of St 60 Steel." Applied Mechanics and Materials 493 (January 2014): 468–72. http://dx.doi.org/10.4028/www.scientific.net/amm.493.468.

Full text

Abstract:

The use of cutting fluid is to reduce the friction between tool and workpiece, reduce and dissipate generated heat. The application of cutting fluid is also to improve the surface quality of workpiece and increase the tool life. On the other side, cutting fluid contains chemical carcinogens that causes serious health risks for machine operators and have inherent waste disposal concern on the environment. Due to these problems, some alternative have been sought to minimize or avoid the use of cutting fluid in machining processes. Air cooling techniques were proposed as alternative cooling mediu

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Yi, Peng-Xiao Zhu, Cai Tang, and Zhi Sun. "Effects of Quenching Medium on Microstructure and Mechanical Properties of High Chromium Cast Iron." Crystals 12, no. 10 (2022): 1332. http://dx.doi.org/10.3390/cryst12101332.

Full text

Abstract:

The cooling properties of different cooling mediums were studied and heat treatment of high chromium cast iron was carried out by different cooling mediums. The results showed that the maximum cooling rate, cooling rate at 300 °C and the quenching liquid cooling capacity of water at 20 °C was 193.6 °C/s, 88.6 °C/s and 2431.1, respectively. With the increase in PAG concentration, the maximum cooling rate and the cooling rate at 300 °C of the coolant decreased. The microstructure of high chromium cast iron treated by water cooling, 10% PAG coolant and 20% coolant was white carbide + tempered mar

APA, Harvard, Vancouver, ISO, and other styles

3

Zulhafril, Herman, Jasman Jasman, and Kimberly June Tespoer. "The Effect of Cooling Media on Tensile Strength of Medium Carbon Steel in Post Welding Process Using Electric Welding (SMAW) with E7018 Electrodes." Teknomekanik 3, no. 2 (2020): 62–69. http://dx.doi.org/10.24036/teknomekanik.v3i2.6472.

Full text

Abstract:

The use of cooling media in post welding process will affect the tensile strength of a material. This study aims to determine how much the influence of using cooling media in post welding and which cooling media is appropriate to use. The process is done by comparing the tensile strength of each cooling media, namely the cooling media of water, air, and coolant. The use of cooling media is carried out after the welding process, until the material that is ready to be welded reaches room temperature. Based on the experiments that have been conducted, the use of post-welding cooling media affects

APA, Harvard, Vancouver, ISO, and other styles

4

Kuo, Chil-Chyuan, Jing-Yan Xu, Yi-Jun Zhu, and Chong-Hao Lee. "Effects of Different Mold Materials and Coolant Media on the Cooling Performance of Epoxy-Based Injection Molds." Polymers 14, no. 2 (2022): 280. http://dx.doi.org/10.3390/polym14020280.

Full text

Abstract:

Metal additive manufacturing techniques are frequently applied to the manufacturing of injection molds with a conformal cooling channel (CCC) in order to shorten the cooling time in the injection molding process. Reducing the cooling time in the cooling stage is essential to reducing the energy consumption in mass production. However, the distinct disadvantages include higher manufacturing costs and longer processing time in the fabrication of injection mold with CCC. Rapid tooling technology (RTT) is a widely utilized technology to shorten mold development time in the mold industry. In princi

APA, Harvard, Vancouver, ISO, and other styles

5

Wang, J. H., J. Messner, and H. Stetter. "An Experimental Investigation on Transpiration Cooling Part II: Comparison of Cooling Methods and Media." International Journal of Rotating Machinery 10, no. 5 (2004): 355–63. http://dx.doi.org/10.1155/s1023621x04000363.

Full text

Abstract:

This article attempts to provide a cooling performance comparison of various mass transfer cooling methods and different cooling media through two experiments. In the first experiment, pressurized air was used as a cooling medium and two different circular tubes were used as specimens. One is made of impermeable solid material with four rows of discrete holes to simulate film cooling, and the other consists of sintered porous material to create a porous transpiration cooling effect. The natures of transpiration cooling and film cooling including leading and trailing edge injection cooling were

APA, Harvard, Vancouver, ISO, and other styles

6

Xi, Lei, Qicheng Ruan, Yuan Gao, Jianmin Gao, Liang Xu, and Yunlong Li. "Numerical study on cooling performance and thermal stress characteristic of an f-class gas turbine stator blade." Thermal Science, no. 00 (2024): 178. http://dx.doi.org/10.2298/tsci240422178x.

Full text

Abstract:

In this study, a coupled numerical computation approach integrating aerothermal and thermomechanical effects was employed to investigate the cooling efficiency and thermal stress characteristics of gas turbine stator blades. A comprehensive analysis was conducted considering varying turbulence intensities in the coolant flow (spanning from 0.05 to 0.15) and different coolant media configurations, including pure air, dual-medium mixture of air and steam, and pure steam. The distributional traits of cooling efficiency and thermal stress on the stator blade surface under these conditions were met

APA, Harvard, Vancouver, ISO, and other styles

7

Walker, Linda J., Phillip O. Moreno, and Håkon Hope. "Cryocrystallography: effect of cooling medium on sample cooling rate." Journal of Applied Crystallography 31, no. 6 (1998): 954–56. http://dx.doi.org/10.1107/s0021889898005299.

Full text

Abstract:

The rates of cooling of small samples with cold N2gas (100 K), liquid N2(77 K) and liquid propane (100 K) have been measured. The samples were one bare Cu-constantan thermocouple and one coated with a 0.25 mm layer of silicone rubber cement. Gas cooling yielded the lowest rate, liquid N2the highest. With the gas, cooling of the centers of the samples from 295 to 140 K took 0.8 and 2 s for the bare and coated samples, respectively; with liquid N2the times were 0.15 and 0.6 s, and with liquid propane they were 0.15–0.18 and 1.2 s, respectively (time reproducibility is within ±10%).

APA, Harvard, Vancouver, ISO, and other styles

8

Permana, Aldi Wahyu, Ratna Dewi Anjani, and Iwan Nugraha Gusniar. "Analisa Pengaruh Variasi Media Pendingin Pada Proses HeatTreatment Metode Hardening-Tempering Material Baja S45C Terhadap Sifat Mekanik dan Struktur Mikro." Jurnal Rekayasa Mesin 15, no. 3 (2020): 199. http://dx.doi.org/10.32497/jrm.v15i3.1989.

Full text

Abstract:

<p><em>In Our life, we always life with any tools and technology for improve our life. We can find many tools and other technolgy are made from metal. Of course, we need metals which have a characteristic for improve that inquiry, for example in terms of hardness in metal. Metal hardness can be increased in several ways. One of them is the hardening process. This process is a process of heat treatment of metal by heating and then cooling it to a certain temperature. In the traditional market, a lot of shredded coconut water is not used and can be used as a cooling medium in the har

APA, Harvard, Vancouver, ISO, and other styles

9

Syahri, Budi, Zonny Amanda Putra, and Nofri Helmi. "HARDNESS ANALYSIS OF STEEL ASSAB 705 GIVEN THAT HARDENING HEAT TREATMENT AND COOLING MEDIUM." INVOTEK: Jurnal Inovasi Vokasional dan Teknologi 17, no. 1 (2017): 17–26. http://dx.doi.org/10.24036/invotek.v17i1.20.

Full text

Abstract:

Steel assab 705 is a medium carbon steel carbon content of 0.38% -0.43% C. The carbon content allows this steel hardened by hardening heat treatment process and the cooling medium. experimental method used in this research, with a total of 12 specimens and cooled at different cooling medium is oil, water and salt solution. Brinell hardness testing method results showed that the increase in violence in the specimen in quenching the intermediate cooling oil around 15.62%, on a specimen in a water cooling medium with an increase of about 17.28%, on a specimen in quenching with a salt solution inc

APA, Harvard, Vancouver, ISO, and other styles

10

Sobota, Tomasz, Dawid Taler, and Szczepan Lubecki. "Pipeline heating and cooling." MATEC Web of Conferences 240 (2018): 05031. http://dx.doi.org/10.1051/matecconf/201824005031.

Full text

Abstract:

The work aims to determine the undetermined temperature distribution of the medium and the pipeline wall using the finite difference method. Time courses of the temperature of the flowing medium and pipeline walls caused by a step change in temperature of the medium at the pipeline inlet, obtained by the numerical method, were compared with the courses calculated using strict analytical formulas. The numerical method of determining transient courses of the temperature of medium and pipeline wall can be used in the analysis of heating and cooling of heating or power pipelines with any changes i

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Cooling medium"

1

Kheniser, Issam E. "Film Cooling Experiments in a Medium Duration Blowdown Facility." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1276540410.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Thacker, John Edward. "Design of medium pressure nozzles for cooling towers." Thesis, Stellenbosch : Stellenbosch University, 1997. http://hdl.handle.net/10019.1/55448.

Full text

Abstract:

Thesis (MScEng)--Stellenbosch University, 1997.<br>One copy microfiche.<br>ENGLISH ABSTRACT: This project concerns the investigation of parameters controlling the behaviour of full-cone spray nozzles of the type used in cooling towers. In the present study large medium pressure hollow and full cone nozzles were investigated. A literature survey provided insight into the relationships between the nozzle dimensions and their spray characteristics, while equations found in the literature were used to correlate the experimental data. It was found that the spray cone angle of hollow cone nozz

APA, Harvard, Vancouver, ISO, and other styles

3

Agyenim, Francis Boateng. "The development of medium temperature thermal energy storage for cooling applications." Thesis, University of Ulster, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.436852.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Morgan, Nathaniel Ray. "A porous medium for structural support and multiphase cooling of high-frequency conductors." Thesis, Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/16335.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Cooke, Geoffrey Herbert. "Study of fluorocarbon liquid as a dielectric and cooling medium in fire resistant power transformers." Thesis, University of Salford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240032.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Belaid, Ashur Belaid. "A six-chamber medium-to-high temperature refrigeration system for laboratory purposes." Thesis, Cape Peninsula University of Technology, 2017. http://hdl.handle.net/20.500.11838/2522.

Full text

Abstract:

Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2017.<br>Food and water fuel and sustain life on earth. Since ancient times, their sourcing and preservation have been very important issues to humanity. In modern times, experimentation is a major step in analysing how cold storage problems in the medical and food science technology fields can be addressed. For investigating spoilage of new products and/or growth of pathogens in such cases, it is necessary to do experiments at different low temperatures for prolonged periods and check the effects. While this can

APA, Harvard, Vancouver, ISO, and other styles

7

Lochhaas, Cassandra Derrick. "Stellar Feedback in Galaxies, Its Impact on the Circumgalactic Medium, and the Importance of Radiative Cooling." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1562676332648711.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Diehl, Steven. "The Hot Interstellar Medium in Normal Elliptical Galaxies." Ohio University / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1149262336.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Davis, Shanon Marie. "Heat-Flux Measurements for a Realistic Cooling Hole Pattern and Different Flow Conditions." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1315013452.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Boehler, Michael David. "Transient Aerothermodynamics of Flow Initialization for a Flat Plate Film Cooling Experiment in a Medium Duration Blowdown Wind Tunnel Facility." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1284767673.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Cooling medium"

1

Workshop, on the Medium Energy Electron Cooling (1997 Novosibirsk Russia). Workshop on the Medium Energy Electron Cooling, Novosibirsk, Russia, 26-28 February, 1997: Proceedings. Budker Institute of Nuclear Physics, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Cooke, Geoffrey Herbert. Study of fluorocarbon liquid as a dielectric and cooling medium in fire resistant power transformers. University of Salford, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Fisenko, Vladimir Vladimirovich. Szhimaemostʹ teplonositeli͡a︡ i ėffektivnostʹ raboty konturov t͡s︡irkuli͡a︡t͡s︡ii I͡A︡ĖU. Ėnergoatomizdat, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hochreiter, L. E. Rod bundle heat transfer facility steam cooling with droplet injection experiments data report. U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Division of Systems Analysis, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Melʹnikov, V. I. Akusticheskie metody diagnostiki dvukhfaznykh teplonositeleĭ I͡A︡ĖU. Ėnergoatomizdat, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

The 2006-2011 World Outlook for Locomotive Fuel-Lubricating and Cooling-Medium Pumps. Icon Group International, Inc., 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Parker, Philip M. The 2007-2012 World Outlook for Locomotive Fuel-Lubricating and Cooling-Medium Pumps. ICON Group International, Inc., 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

The 2006-2011 World Outlook for Parts for Locomotives Excluding Fuel-Lubricating and Cooling-Medium Pumps. Icon Group International, Inc., 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Parker, Philip M. The 2007-2012 World Outlook for Parts for Locomotives Excluding Fuel-Lubricating and Cooling-Medium Pumps. ICON Group International, Inc., 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

The World Market for Fuel, Lubricating, or Cooling Medium Pumps for Internal Combustion Piston Engines: A 2004 Global Trade Perspective. Icon Group International, Inc., 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Cooling medium"

1

König, Valentina, Michael Rom, and Siegfried Müller. "A Coupled Two-Domain Approach for Transpiration Cooling." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_2.

Full text

Abstract:

Abstract Transpiration cooling is an innovative cooling concept where a coolant is injected through a porous ceramic matrix composite (CMC) material into a hot gas flow. This setting is modeled by a two-domain approach coupling two models for the hot gas domain and the porous medium to each other by coupling conditions imposed at the interface. For this purpose, appropriate coupling conditions, in particular accounting for local mass injection, are developed. To verify the feasibility of the two-domain approach numerical simulations in 3D are performed for two different application scenarios:

APA, Harvard, Vancouver, ISO, and other styles

2

Herzog, Alexander, Carolina Pelka, Rudolf Weiss, and Frank Skorupa. "Determination of the Cooling Medium Composition in an Indirect Cooling System." In Energy and Thermal Management, Air-Conditioning, and Waste Heat Utilization. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-00819-2_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Voskresensky, Dmitri N. "Neutrino Cooling of Neutron Stars: Medium Effects." In Lecture Notes in Physics. Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/3-540-44578-1_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Babul, Arif, Ian G. McCarthy, and Greg B. Poole. "On the Intracluster Medium in Cooling Flow & Non-Cooling Flow Clusters." In Multiwavelength Cosmology. Springer Netherlands, 2004. http://dx.doi.org/10.1007/0-306-48570-2_51.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Dai, Jianing, Yulin Yan, Erhao Li, Zhengyu Gong, Ling Zhang, and Zhixing Gu. "Study on the 3-D Natural Circulation Characteristics of LFR Under Steady State by Using Ansys Fluent." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_79.

Full text

Abstract:

AbstractAs one of the Generation IV reactors, Lead-based Fast Reactor (LFR) has been considered to be great promising owing to its advantages in nuclear safety, sustainable development of nuclear energy and nuclear waste disposal. Owing to the excellent thermal expansion characteristics of Lead-based coolant materials, the primary cooling system of LFR can operate in natural circulation driven mode. The CFD (Computational Fluid Dynamics)-based thermal-hydraulics and safety analyses of nuclear reactors, especially liquid metal pool-type reactors have attracted great attentions in recent years.

APA, Harvard, Vancouver, ISO, and other styles

6

Sarazin, Craig L. "Cooling Flows and X-Ray Emission in Early-Type Galaxies." In The Interstellar Medium in Galaxies. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0595-5_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Chen, Hong Da, Y. R. Feng, Chun Yong Huo, et al. "The Analysis to the Correlation between Cooling Medium and Cooling Result of DWTT Specimen." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.2985.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Otaki, Koki, and Masao Mori. "Study of Galaxy Collisions and Thermodynamic Evolution of Gas Using the Exact Integration Scheme." In Computational Science and Its Applications – ICCSA 2022 Workshops. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-10562-3_27.

Full text

Abstract:

AbstractRadiative cooling of the interstellar medium plays a vital role in the context of galaxy formation and evolution. On the other hand, the cooling time in the high-density regions involving star formation is much shorter than the dynamical time of the gas. In numerical simulations, it is challenging to solve physical phenomena coexisting on significantly different timescales, and it is known as the overcooling problem in the study of galaxy formation. Townsend (2009) has developed the Exact Integration (EI) scheme that provides a stable solution for the cooling term in the energy equatio

APA, Harvard, Vancouver, ISO, and other styles

9

Zhang, Weirong, Hongye Li, Yifei Bai, and Zhaofeng Wang. "Optimization of Cooling Airflow in Data Center by CFD Analysis in a New Energy Efficient Cooling System Using CO2 as Cooling Medium." In Environmental Science and Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9528-4_119.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Filzwieser, Andreas, Martina Hanel, and Hans-Jörg Krassnig. "ILTEC Technology in Magnesium Industry—Elimination of Water as Cooling Medium." In The Minerals, Metals & Materials Series. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92533-8_21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cooling medium"

1

McInnis, Christine E., Terry M. Williams, and Donald Love. "Best Practices for Microbial Control in Small and Medium Sized Cooling Towers." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02491.

Full text

Abstract:

Abstract Small to medium sized cooling towers can be difficult to treat for a variety of reasons including access to the sump and safe handling of biocides. Additionally, small and medium sized cooling towers can require the same attention from service companies as larger, more profitable systems, but smaller systems are often visited less frequently. Solid biocides facilitate handling in the field and offer an improved margin of safety over liquid biocides. Additionally, solid biocides are generally more sustainable due to their higher concentration of active ingredients compared to liquid bi

APA, Harvard, Vancouver, ISO, and other styles

2

An, Zhenpeng, Kai Liu, Yang Du, and Yufeng Fan. "The Influence of the Medium and Structure for Cooling Suit on the Wireless Signal." In 2024 7th International Conference on Electronics Technology (ICET). IEEE, 2024. http://dx.doi.org/10.1109/icet61945.2024.10673206.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Nalepa, C. J., R. M. Moore, G. L. Golson, T. W. Wolfe, and P. R. Puckorius. "Case Study: Minimization of Corrosion Using Activated Sodium Bromide in a Medium-Size Cooling Tower." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96485.

Full text

Abstract:

Abstract The process loop cooling tower at the Albemarle Process Development Center in Baton Rouge, LA has historically used chlorine as the biocide together with industry accepted phosphorus-based corrosion/ scale inhibitors. Although this regimen provided biocontrol, sludge and iron build-up was a recurring problem, especially in low-velocity, small cross-sectional areas of piping. A general clean-up of the system was performed in April, 1995. This clean-up was followed with a switch to a two-component corrosion inhibitor/ dispersant package. It was decided to study alternate biocides as wel

APA, Harvard, Vancouver, ISO, and other styles

4

Park, Sung Jun, and Seok Pill Jang. "Characterization of the External Thermal Resistance of the Condenser Using the Evaporative Cooling with Porous Medium." In 2024 30th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC). IEEE, 2024. http://dx.doi.org/10.1109/therminic62015.2024.10732600.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Runham, Gerard, Ian Carpenter, Hunter Thomson, and Paul Hammonds. "Closed Cooling Loop Corrosion – A Laboratory Based Investigation of Possible Causes." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16700.

Full text

Abstract:

Abstract Closed loop cooling circuits operate with good quality, low dissolved solids, make up water. Treatment packages are used to control corrosion and bacteria within the medium. Problems with this type of system can arise from a number of causes such as excessive make-up medium, lack of treatment chemical, bacterial degradation of treatment chemical, excessive ingress of oxygen, and poor water quality. The work presented was initiated to investigate a nitrite / molybdate corrosion inhibitor due to ongoing integrity concerns in the closed loop system. There is not clear published guidance

APA, Harvard, Vancouver, ISO, and other styles

6

Taghavi, Hooman, Parthkumar Bhuvela, Jamil A. Khan, and Adel Nasiri. "Design and Optimization of a Forced-Air Cooling System for a Compact Medium Voltage Solar Photovoltaic Inverter." In 2024 13th International Conference on Renewable Energy Research and Applications (ICRERA). IEEE, 2024. https://doi.org/10.1109/icrera62673.2024.10815475.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Failon, B. K., R. G. Gabriel, B. L. Downward, P. R. Fowler, and R. E. Talbot. "A New, Environmentally Friendly Corrosion Inhibitor for Highly Cycled Cooling Water Systems." In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99096.

Full text

Abstract:

Abstract PCM (phosphonocarboxylate mixture) has been used successfully for several years for the control of corrosion in industrial cooling systems. Along with its excellent corrosion control performance, PCM has a much better environmental profile than many competing products due to its all-organic composition. However, until recently, the use of this product has been restricted to waters of low to medium hardness when used in first generation formulations. A significant breakthrough has now extended its application to hard waters. This paper reports laboratory test results and field studies

APA, Harvard, Vancouver, ISO, and other styles

8

Salač, Petr. "Shape optimization in flowing medium cooling." In APPLICATIONS OF MATHEMATICS IN ENGINEERING AND ECONOMICS (AMEE '12): Proceedings of the 38th International Conference Applications of Mathematics in Engineering and Economics. AIP, 2012. http://dx.doi.org/10.1063/1.4766765.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Yamasaki, Hiroshi, Kei Suzuki, Atsushi Ohashi, and Yasushige Ujiie. "Cooling Control Using by Emulsified Heat Transfer Medium." In ASME 2009 InterPACK Conference collocated with the ASME 2009 Summer Heat Transfer Conference and the ASME 2009 3rd International Conference on Energy Sustainability. ASMEDC, 2009. http://dx.doi.org/10.1115/interpack2009-89117.

Full text

Abstract:

Experimental study has been conducted on the heat transfer coefficient control using by the water and silicone oil emulsions. The focus is mainly paid on the effect on the heat transfer of the ambient emulsion temperature, water content and the stirring conditions. Heat transfer on an electrically heated horizontal Pt wire was measured. It is concluded that there is the transition point in the heat transfer coefficient, which is just above the boiling point of emulsified component of water. This may be the potentially useful method for the cooling control. The mechanism of heat transfer of the

APA, Harvard, Vancouver, ISO, and other styles

10

Chen, Huichuang, Shunzhou Yu, Guanghui Zhu, and Weiguo Xu. "Research on evaporative cooling medium for large generator." In 2014 17th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2014. http://dx.doi.org/10.1109/icems.2014.7013902.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cooling medium"

1

Seletskiy, Sergei M. Attainment of Electron Beam Suitable for Medium Energy Electron Cooling. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/878935.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

MacLachlan, James. Contributions to the Second Workshop on Medium Energy Electron Cooling. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/561146.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kroc, Thomas, W. Herrmannsfeldt, Dave Anderson, Xiojian Kang, Alex Shemyakin, and Anatoly Sharapa. Workshop on medium-energy electron cooling: Proceedings, working group on guns and collectors. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/1156356.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sagaiyaraj, Bernard. Increasing Energy Efficiency of Central Cooling Systems with Engineered Nanofluids. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau538344493.

Full text

Abstract:

Buildings consume about 40% of the world’s energy consumption and of that, 65% is dedicated to cooling (or heating) systems. Central building cooling uses water as the main heat transfer medium. The nanoparticle fluid suspension exhibits thermal properties superior to water. The goal was to achieve the highest possible thermal properties with just the right amount of nanoparticles in a uniform and stable dispersion and suspension in water. This engineered nanofluid contains a uniform and stable suspension of graphene nanoparticles (GNP) in water. Using covalent functionalization, centrifugatio

APA, Harvard, Vancouver, ISO, and other styles

5

MacLachlan, Jim, Chuck Schmidt, Saeed Assadi, et al. Recycler Medium Energy Elctron Coolinig Experiment. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/993216.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Opportunities and drivers for SME agribusinesses to reduce food loss in Africa and Asia. Commercial Agriculture for Smallholders and Agribusiness (CASA), 2023. http://dx.doi.org/10.1079/20240191175.

Full text

Abstract:

Climate change, conflict, and the COVID-19 pandemic and its aftermath have caused a sharp increase in food insecurity globally. Reducing food loss - a decrease in the quantity and/or quality of food that takes place from production through to processing - in places where food insecurity is most severe has the potential to be a win-win for food security, climate outcomes, and for commercially driven agribusinesses. This report reviews the common drivers of food loss in sub-Saharan Africa and South Asia, which include inadequate storage, lack of cold chain, and poor post-harvest and distribution

APA, Harvard, Vancouver, ISO, and other styles

7

Energías renovables en calefacción y refrigeración en los sectores residencial y terciario. Universidad de Deusto, 2017. http://dx.doi.org/10.18543/yhix5237.

Full text

Abstract:

De acuerdo con la Comisión Europea, la calefacción y refrigeración (heating and cooling) supone aproximadamente la mitad de la energía que se consume en Europa y la mayor parte de la misma se pierde. Por este motivo y otros adicionales como la reducción de las importaciones de energía o de las emisiones de gases de efecto invernadero (GEI), así como de los objetivos de renovables establecidos para 2020 y 2030, resulta prioritario desarrollar una estrategia para mejorar la eficiencia y la sostenibilidad de un campo que se ha convertido en el mayor sector energético europeo. En este estudio se a

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!