Log in

Relevant bibliographies by topics / Cooling system design

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Cooling system design'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cooling system design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cooling system design"

1

Kim, Jin-Kuk, Guang Chung Lee, Frank X. X. Zhu, and Robin Smith. "Cooling System Design." Heat Transfer Engineering 23, no. 6 (2002): 49–61. http://dx.doi.org/10.1080/01457630290098754.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

PAGAR., MR SHAILESH J. "DESIGN AND ESTIMATION OF COOLING TOWER." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem31490.

Full text

Abstract:

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature using radiators. The natural draft cooling tower is an open, direct-contact system. It works using a heat exchanger, allowing hot water from the system to be cooled through direct

APA, Harvard, Vancouver, ISO, and other styles

3

Kim, Jin-Kuk, and Robin Smith. "Cooling water system design." Chemical Engineering Science 56, no. 12 (2001): 3641–58. http://dx.doi.org/10.1016/s0009-2509(01)00091-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zuo, Z. J., Si Bi, L. R. Fu, Z. Q. Weng, and S. H. Peng. "Cooling System Design of Ion Nitriding and PCVD Composite Treatment Furnace." Applied Mechanics and Materials 448-453 (October 2013): 3462–66. http://dx.doi.org/10.4028/www.scientific.net/amm.448-453.3462.

Full text

Abstract:

Keywords: ion nitriding furnace cooling system vacuum system Abstract. About fuction of vacuum plasma nitriding furnace cooling system, and its design and calculation of main parts, in particular control of water consumption. The cooling water system have been set into the water flowing through the four heat shield, and gradually take the heat, then the coolant out by outlet pipe. Cooling water flows through layers of insulation to varying degrees of cooling, to ensure that each level of temperature, precise calculation of water flow can only be guaranteed to ensure the maximum water savings a

APA, Harvard, Vancouver, ISO, and other styles

5

Song, Yufei, Zhiguo Liu, Shiwu Li, and Qingyong Jin. "Design and Optimization of an Immersion Liquid Cooling System in Internet Datacenter." International Journal of Heat and Technology 39, no. 6 (2021): 1923–29. http://dx.doi.org/10.18280/ijht.390629.

Full text

Abstract:

With the development of high-performance chips, the heat flux of Internet datacenter (IDC) is on the rise, and heat dissipation becomes a major bottleneck of IDC development. The cooling needs of the IDC room can hardly be met by the traditional method of air cooling. In recent years, immersion liquid cooling has attracted a growing attention, due to its excellent performance. This paper designs and optimizes an immersion liquid cooling system for IDC. Multiple numerical simulations were carried out to analyze the influence of the system parameters on heat dissipation, and improve the system e

APA, Harvard, Vancouver, ISO, and other styles

6

Park, S. J., and T. H. Kwon. "Thermal and Design Sensitivity Analyses for Cooling System of Injection Mold, Part 2: Design Sensitivity Analysis." Journal of Manufacturing Science and Engineering 120, no. 2 (1998): 296–305. http://dx.doi.org/10.1115/1.2830127.

Full text

Abstract:

DSA will ultimately play an important role in the design optimization process. Part 2 of this paper presents an efficient and accurate methodology for the DSA of the cooling stage of the injection molding process. The DSA program developed in the present study utilizes the implicit differentiation of the boundary integral equations and the B.C.s presented in Part I with respect to all DVs to yield the sensitivity equations. In this DSA, we have considered various DVs as follows: (i) (DVs related to processing conditions) inlet coolant bulk temperature and inlet coolant volumetric flow rate of

APA, Harvard, Vancouver, ISO, and other styles

7

Midiani, Luh Putu Ike, Made Ery Arsana, and I. Nyoman Gunung. "Design of sintered zeolite evaporative cooling system." International research journal of engineering, IT & scientific research 8, no. 6 (2022): 323–32. http://dx.doi.org/10.21744/irjeis.v8n6.2243.

Full text

Abstract:

An evaporative cooling system for fruit and vegetable was designed, fabricated, and evaluated in this study. The evaporative cooling system is made of plywood covered with steorofoam. The inside system is made of plywood with dimensions of 30 cm x 30 cm x 30 cm. The inside of the box is covered with steorofoam with a thickness of 2 cm on the front, sides and back. The cooling pad in this evaporative cooling system is sintered zeolite. Sintering zeolite is a new material used to optimize evaporative cooling systems. One suction fan to draw environmental air through the cooling pad and into the

APA, Harvard, Vancouver, ISO, and other styles

8

Kwon, T. H. "Mold Cooling System Design Using Boundary Element Method." Journal of Engineering for Industry 110, no. 4 (1988): 384–94. http://dx.doi.org/10.1115/1.3187898.

Full text

Abstract:

Cooling system design in injection molding industries is of great importance because it significantly affects productivity and the quality of the final part. It would thus be very helpful for mold designers to be able to use a computer aided design tool in determining locations of cooling channels and process conditions to achieve uniform cooling and minimum cooling time. Towards this goal, the Boundary Element Method (BEM) has been applied to develop a system of computer aided cooling system design programs: (a) an interactive design program using a two-dimensional BEM and (b) a cooling analy

APA, Harvard, Vancouver, ISO, and other styles

9

NAKAMURA, Kenta, Yuki UEDA, and Atsushi AKISAWA. "0713 Design of Thermoacoustic Cooling System." Proceedings of the Fluids engineering conference 2009 (2009): 293–94. http://dx.doi.org/10.1299/jsmefed.2009.293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Huang, Zhao Yang. "The Optimal Design of Injection Mold Cooling System." Advanced Materials Research 490-495 (March 2012): 2647–51. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.2647.

Full text

Abstract:

Mold cooling plays a crucial role in the plastic molding process. This paper caries on an analysis of the impact of the cooling system on plastic molding process and put forward three assumptions to simplify the cooling system mathematical equations, establishes a systematic mathematical models taking the cavity cooling water pipe for the study object, optimizes methods and processes , uses MATLAB tools to optimize the design, and gets the optimal solution of the important parameters of cooling system to achieve the reasonable set of the cooling circuits in the complex injection mold structure

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Cooling system design"

1

Kim, J.-K. "Cooling water system design." Thesis, University of Manchester, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.504687.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Chiu, Harriet Alicia. "Design of a FSAE cooling system." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/123258.

Full text

Abstract:

Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2019<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (page 24).<br>MIT Motorsports is a FSAE Electric team at MIT that designs, manufactures, and tests electric formula-style racecars to compete in an annual collegiate competition. The cooling system for the Model Year 19 vehicle must provide adequate cooling to the motors and motor controllers, meet power consumption requirements dictated by the low voltage battery, and minimize system mass. Fluid modelling and benchtop t

APA, Harvard, Vancouver, ISO, and other styles

3

Glover, Garrett A. "The Next Generation Router System Cooling Design." DigitalCommons@CalPoly, 2009. https://digitalcommons.calpoly.edu/theses/191.

Full text

Abstract:

Advancements in the networking and routing industry have created higher power electronic systems which dissipate large amounts of heat while cooling technology for these electronic systems has remained relatively unchanged. This report illustrates the development and testing of a hybrid liquid-air cooling system prototype implemented on Cisco’s 7609s router. Water was the working fluid through cold plates removing heat from line card components. The water was cooled by a compact liquid-air heat exchanger and circulated by two pumps. The testing results show that junction temperatures were main

APA, Harvard, Vancouver, ISO, and other styles

4

Ernst, Timothy Craig. "Design, Fabrication and Testing of a Wearable Cooling System." Thesis, Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/6851.

Full text

Abstract:

A wearable cooling system was developed in this study for use in elevated temperature environments by military, fire-fighting, chemical-response, and other hazardous duty personnel. Such a system is expected to reduce heat-related stresses, increasing productivity and allowable mission duration, reduce fatigue, and lead to a safer working environment. The cooling system consists of an engine-driven vapor-compression system assembled in a backpack configuration, coupled with a cooling garment containing refrigerant lines worn in close proximity to the skin. A 2.0 L fuel tank in the backpack

APA, Harvard, Vancouver, ISO, and other styles

5

Abou-Khamis, Kamal A. "Analysis and Design of Desiccant Cooling Systems." Youngstown State University / OhioLINK, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=ysu999701887.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bottau, Francesco. "Design and optimization af a race car cooling system." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.

Find full text

Abstract:

The aim of this thesis is the design and the optimization of water radiator for the Tatuus F3 race car. Tatuus is a racing car manufacturer which designs, produces and sells cars for different racing categories. In a race car is essential that weight and occupied volume are kept as low as possible. This requirement is achieved by optimizing the vehicle’s components. For this reason, Tatuus commissioned a project focused on the optimization of heat exchangers. It is very important that the flow inside every radiator is as uniform as possible, to make it works in the most efficient way. With t

APA, Harvard, Vancouver, ISO, and other styles

7

Fakhraldin, Shahen Mohammed. "Design of a solar cooling system for Iraq climate." Thesis, University of Plymouth, 2016. http://hdl.handle.net/10026.1/6528.

Full text

Abstract:

With the objectives of designing a solar cooling system with cold storage unit for the Iraqi climate, solar energy resources were assessed and methods were proposed to enhance harvesting the solar energy in the Iraqi climate. Where the results showed that adopting monthly average optimal tilt angles led to an increase in the amount of useful solar energy gained nearly 9%. A methodology of multi objective optimisation of solar absorption cooling system was then developed and demonstrated by applying it in a domestic application in Baghdad. Maximising the system performance in exergy, economic a

APA, Harvard, Vancouver, ISO, and other styles

8

Chan, Lok Shun Apple. "Optimisation of piping network design for district cooling system." Thesis, De Montfort University, 2008. http://hdl.handle.net/2086/4109.

Full text

Abstract:

A district cooling system (DeS) is a.scheme for centralised cooling energy distribution which takes advantage of economies of scale and load diversity. . A cooling medium (chilled water) is generated at a central refrigeration plant and then supplied to a district area, comprising multiple buildings, through a closed-loop piping circuit. Because of the substantial capital investment involved, an optimal design of the distribution piping . configuration is one of the crucial factors for successful implementation of a district 1'. cooling scheme. Since there. exists an enormous number of differe

APA, Harvard, Vancouver, ISO, and other styles

9

Fiedel, Ethan R. "Cooling system early-stage design tool for naval applications." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/67778.

Full text

Abstract:

Thesis (Nav. E. and S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 65-66).<br>This thesis utilizes concepts taken from the NAVSEA Design Practices and Criteria Manualfor Surface Ship Freshwater Systems and other references to create a Cooling System Design Tool (CSDT). With the development of new radars and combat system equipment on warships comes the increased demand for the means to remove the heat generated by these power-hungry systems. Whereas in the past, the relativ

APA, Harvard, Vancouver, ISO, and other styles

10

Patalano, Giovanbattista. "Risk-informed design changes for a passive cooling system." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/44780.

Full text

Abstract:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, 2007.<br>Includes bibliographical references (p. 47-49).<br>The failure probability of a passive decay heat removal system after a LOCA is evaluated as part of a risk-informed design process for a helium-cooled fast reactor. The system was modeled using RELAP5-3D. The epistemic uncertainties in input parameters as well as the epistemic model uncertainties in the code were assessed and propagated through the model using Latin hypercube sampling. The changes in the design that we investigated reduced

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Cooling system design"

1

Stubley, P. SEAFP cooling system design: Task M8 - water coolant option (final report). CFFTP, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hansen, Erwin G. Hydronic system design and operation: A guide to heating and cooling with water. McGraw-Hill, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

United States. National Aeronautics and Space Administration., ed. The embodiment design of the heat rejection system for the portable life support system. National Aeronautics and Space Administration, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

George C. Marshall Space Flight Center, ed. Design of refractory metal heat pipe life test environment chamber, cooling system, and radio frequency heating system. National Aeronautics and Space Administration, Marshall Space Flight Center, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

J, Keller, and United States. National Aeronautics and Space Administration., eds. The design and testing of the LSSIF Advanced Thermal Control System. American Institute of Aeronautics and Astronautics, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Johnson, Richard P. A preliminary design and analysis of an advanced heat-rejection system for an extreme altitude advanced variable cycle diesel engine installed in high-altitude advanced research plaftorm. National Aeronautics and Space Administration, Dryden Flight Research Facility, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Keith, Kaste, and Ames Research Center. Thermodynamics Facilities Branch, eds. Thermal analysis and design of a cooling system for a Mach 14 nozzle: Final report covering period February, 1986 to January, 1987. Thermodynamics Facilities Branch, NASA Ames Research Center, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

SAE International Congress & Exposition (1992 : Detroit, Mich.), ed. New engine design and cooling systems. Society of Automotive Engineers, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kanefsky, Peter. A systems approach to engine cooling design. Society of Automotive Engineers, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stewart, William E. Design guide: Combustion turbine inlet air cooling systems. American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Cooling system design"

1

Kazmer, David O. "Cooling System Design." In Injection Mold Design Engineering. Carl Hanser Verlag GmbH & Co. KG, 2022. http://dx.doi.org/10.1007/978-1-56990-892-1_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kazmer, David O. "Cooling System Design." In Injection Mold Design Engineering. Carl Hanser Verlag GmbH & Co. KG, 2016. http://dx.doi.org/10.3139/9781569905715.009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kazmer, David O. "Cooling System Design." In Injection Mold Design Engineering. Carl Hanser Verlag GmbH & Co. KG, 2007. http://dx.doi.org/10.3139/9783446434196.009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zaw, Khin, Aung Myat, Md Raisul Islam, Poh Tiong Keng, and Aung Kywe Nyunt. "District Cooling System Design." In District Cooling Systems. CRC Press, 2025. https://doi.org/10.1201/9781032670164-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Cheng, Allen, Robert Dawson, and Richard Zhao. "Design of a Tunnel Cooling System." In Supercollider 5. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2439-7_204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zeng, Tongyan, Essam F. Abo-Serie, Manus Henry, and James Jewkes. "Thermal Optimisation Model for Cooling Channel Design Using the Adjoint Method in 3D Printed Aluminium Die-Casting Tools." In Springer Proceedings in Energy. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-30960-1_31.

Full text

Abstract:

AbstractIn the present study, the adjoint method is introduced to the optimisation of the corner cooling element in two baseline cooling designs for a mould cavity, as examples of the Aluminium metal die-casting process. First, a steady thermal model simulating the Aluminium die-casting process is introduced for the two-corner cooling design scenario. This steady model serves as the first iteration of the optimised model using the adjoint method. A dual-parameter objective function targets the interfacial temperature standard deviation and pressure drop across the internal cooling region. For

APA, Harvard, Vancouver, ISO, and other styles

7

Tate, Ed, C. W. Chang, A. Alajbegovic, W. Jansen, A. Bushell, and B. Stegmann. "Fast models for battery cooling system design." In 17. Internationales Stuttgarter Symposium. Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-16988-6_35.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Torres-Alba, Abelardo, Jorge Manuel Mercado-Colmenero, José Antonio Amate-Teva, and Cristina Martín-Doñate. "Application of New Conformal Cooling Systems for Sustainable Injection Molds." In Proceedings of the XV Ibero-American Congress of Mechanical Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_42.

Full text

Abstract:

AbstractThe cooling phase in the cycle time of the injection molding process is currently the phase with the greatest influence on energy expenditure and sustainability. Traditional designs are not capable of perform an adequate thermal exchange between the coolant and the mold cavity, especially in parts with complex geometries and deep cores. For this reason, the conformal cooling channels provide greater flexibility to the design, achieving efficient heat exchange between the surface and internal layers of the plastic part. The present research describes the application of a new conformal c

APA, Harvard, Vancouver, ISO, and other styles

9

Badea, Nicolae, and Alexandru Epureanu. "Structural Design of the mCCHP-RES System." In Design for Micro-Combined Cooling, Heating and Power Systems. Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-6254-4_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Badea, Nicolae, Alexandru Epureanu, Emil Ceanga, Marian Barbu, and Sergiu Caraman. "Functional Design of the mCCHP-RES System." In Design for Micro-Combined Cooling, Heating and Power Systems. Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-6254-4_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cooling system design"

1

Sogunuru, Annapurna, P. Vikram, Gokul Depuk TP, and Priyank Prasad. "Design and development of Liquid Cooling System for Airborne Radar." In 2024 IEEE Space, Aerospace and Defence Conference (SPACE). IEEE, 2024. http://dx.doi.org/10.1109/space63117.2024.10668057.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Zhang, Min. "Design and Research of Cooling System for Valve Based Electronics." In 2024 11th International Forum on Electrical Engineering and Automation (IFEEA). IEEE, 2024. https://doi.org/10.1109/ifeea64237.2024.10878683.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lee, J., T. Nomura, and E. M. Dede. "Design Optimization of Magnetic Fluid Cooling System." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-85817.

Full text

Abstract:

This paper introduces topology design optimization for a magnetically controlled convective heat transfer cooling system. It is well known that a stationary magnetic field subjected to a temperature gradient generates fluid motion in a magnetic fluid (e.g. ferrofluid). This physical phenomenon may be exploited to drive convective motion in the cooling system to maximize the heat transfer performance. Here, the magnetic field source layout of the system is designed to enhance the heat transfer performance. More specifically, the distribution and magnetization direction of the permanent magnet (

APA, Harvard, Vancouver, ISO, and other styles

4

Constantin, Sandu, and Dan Brasoveanu. "Relative Cooling System: Design and Efficiency." In ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/gt2003-38032.

Full text

Abstract:

Cooling systems with liquid for gas turbines that use the relative motion of engine stator with respect to rotor have been called relative cooling systems. This motion actuates the pump for liquid recirculation and the system is encapsulated within the engine rotor. In this manner, the difficult problem of sealing stator/rotor interfaces at high temperature, pressure and relative velocity is circumvented. A first generation of such systems could be manufactured using existing technologies and would boost thermal efficiency of gas turbines by more than 3% compared to the most advanced air-cooli

APA, Harvard, Vancouver, ISO, and other styles

5

Welsch, Felix, Susanne-Marie Kirsch, Nicolas Michaelis, et al. "Elastocaloric Cooling: System Design, Simulation, and Realization." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-7982.

Full text

Abstract:

Elastocaloric cooling is a novel environment-friendly alternative to vapor compression-based cooling systems. This solid-state cooling technology uses NiTi shape memory alloys (SMAs) as cooling medium. SMAs are well known for lightweight actuator systems and biomedical applications, but in addition, these alloys exhibit excellent cooling properties. Due to the high latent heats activated by mechanical loading/unloading, large temperature changes can be generated in the material. Accompanied by a small required work input, this also leads to a high coefficient of performance superior to vapor c

APA, Harvard, Vancouver, ISO, and other styles

6

Vaitekunas, David A., and Pavel Aleksandrov. "Active hull cooling system performance analysis." In Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXIX, edited by Keith A. Krapels and Gerald C. Holst. SPIE, 2018. http://dx.doi.org/10.1117/12.2304599.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gore, David, and John Kerr. "Main Rotor Gearbox Oil Cooling System Design." In Vertical Flight Society 79th Annual Forum & Technology Display. The Vertical Flight Society, 2023. http://dx.doi.org/10.4050/f-0079-2023-18142.

Full text

Abstract:

This paper details the design process for a Main Rotor Gearbox Oil Cooling System and recommends techniques to optimise future designs. It covers the drive methods which must be considered in the design, along with the optimum heat exchanger and airflow path arrangements to meet the design requirements. This paper also describes the different type of fan which can be used, and the relative merits. The cooling system design is dictated by the specification, and the impact of certain requirements - temperature, fan seizure performance, containment, bearing selection and lubrication - are covered

APA, Harvard, Vancouver, ISO, and other styles

8

Zhang, R., C. Zhang, and J. Jiang. "CFD Assisted Control System Design for Chip Cooling." In ASME 2012 Heat Transfer Summer Conference collocated with the ASME 2012 Fluids Engineering Division Summer Meeting and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ht2012-58609.

Full text

Abstract:

In this paper, a computational fluid dynamics (CFD) assisted control system design methodology has been described in detail. The entire design and evaluation procedure has been illustrated through a feedback control system synthesis for a CPU chip cooling system. The design methodology starts with a full-scale CFD simulation of the nonlinear dynamic process to generate the input and output databases of the process. Using this data set, linear dynamic models around specified operating points are obtained using system identification techniques. Based on these models, one can design appropriate c

APA, Harvard, Vancouver, ISO, and other styles

9

Masaryk, Michal, Peter Mlynár, and Dominik Štrba. "Design of solar powered ejector cooling system." In 38TH MEETING OF DEPARTMENTS OF FLUID MECHANICS AND THERMODYNAMICS. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5114758.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wang, Jun, Ting Ke, and Hongwei Guo. "Design of Cooling System of Laser Scalpel." In 2022 China Automation Congress (CAC). IEEE, 2022. http://dx.doi.org/10.1109/cac57257.2022.10055378.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cooling system design"

1

Saini, Puneet, and Wolfgang Weiss. Design Guidelines. IEA SHC Task 65, 2023. http://dx.doi.org/10.18777/ieashc-task65-2023-0006.

Full text

Abstract:

This document is the final report for activity B2 “Design guidelines” of the IEA SHC Task 65 “Solar Cooling for the Sunbelt regions”. It presents the collection of design and system integration guidelines for solar cooling projects. For this purpose, a comprehensive questionnaire was created that goes into detail about various solar cooling components, design, sizing and other sub-systems such as heat rejection unit and cold distribution system. Data from 10 case studies are collected and presented showing the performance of solar cooling systems with varying boundary conditions. Additionally,

APA, Harvard, Vancouver, ISO, and other styles

2

CESARONI TECHNOLOGY INC MARTINSBURG WV. Lightweight Cooling Component Development (LCCD) Program. Polymeric LVS Cooling System Design Report. Defense Technical Information Center, 1998. http://dx.doi.org/10.21236/ada402058.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Stroman, Richard O., Michael W. Schuette, and Gregory S. Page. Cooling System Design for PEM Fuel Cell Powered Air Vehicles. Defense Technical Information Center, 2010. http://dx.doi.org/10.21236/ada525161.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Deibele, C., and /Fermilab. Design of Microwave Band Pass Filters for the Debuncher Stochastic Cooling System. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/984584.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sun, Ding, and /Fermilab. Design and Simulation Results of Waveguide Bends Used in Debuncher Cooling System. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/984592.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jeong, Yeongshin, Darius Lisowski, Qiuping Lv, and Rui Hu. Preliminary Design of Reactor Cavity Cooling System for a Horizontal Compact HTGR. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1893638.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lv, Quiping, Xiaodong Sun, Richard Chtistensen, Thomas Blue, Graydon Yoder, and Dane Wilson. Design, Testing and Modeling of the Direct Reactor Auxiliary Cooling System for AHTRs. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1183704.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Potter, R. Shutdown cooling system design description Modular HTGR [High-Temperature Gas-Cooled Reactor] Plant. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/714062.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Pasciuto, Daniele. Design of the Cooling System of the Mu2e Electromagnetic Calorimeter at Fermi National Accelerator Laboratory. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1574839.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Vaghetto, Rodolfo. An Experimental Study of Design and Performance for the Water-Based Reactor Cavity Cooling System. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1581183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!