Log in

Relevant bibliographies by topics / Corrosion and stress in brass / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Corrosion and stress in brass.

Dissertations / Theses on the topic 'Corrosion and stress in brass'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Corrosion and stress in brass.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Mackay, F. G. "The application of the J-integral to stress corrosion cracking." Thesis, University of Newcastle Upon Tyne, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.384084.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ahluwalia, H. S. "Stress corrosion cracking of 70/30 brass in nitrate solutions and waters." Thesis, University of Newcastle Upon Tyne, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.377847.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Berne, Clément. "Étude de la sensibilité à la corrosion sous contrainte de laitons biphasés : Conception d'un test accéléré d'évaluation de la sensibilité à la corrosion sous contrainte de composants de robinetterie gaz." Phd thesis, Toulouse, INPT, 2015. http://oatao.univ-toulouse.fr/14643/1/berne1.pdf.

Full text

Abstract:

Les ruptures imprévisibles de composants de robinetterie gaz constituent une problématique majeure de la sûreté du réseau de GrDF. Actuellement, la prévention des risques de rupture repose sur la réalisation de tests accélérés de sensibilité à la corrosion sous contrainte (CSC), préalablement à la mise en service des composants de robinetterie en laiton. Il s'agit d'éviter des accidents, au caractère potentiellement très dommageable, du fait de l'inflammabilité des gaz transportés. Or, dans certains cas, des endommagements prématurés de composants de robinetterie sont toujours constatés. Les l

APA, Harvard, Vancouver, ISO, and other styles

4

Murray-Ramos, Nestor Agustin. "Examining Aspects of Copper and Brass Corrosion in Drinking Water." Thesis, Virginia Tech, 2006. http://hdl.handle.net/10919/35723.

Full text

Abstract:

<p> As the water industry complies with the new arsenic standard and new treatments are installed, unintended consequences might be expected in relation to corrosion control when sulfate/chloride ratio, pH, phosphate, iron, aluminum, bicarbonate and organic matter levels are altered. In some cases, these changes will be beneficial and in other detrimental. </p><p> This research project is the first to systematically evaluate the effect of some key changes in the chemistry of the treated water in relation to copper and brass corrosion control. A 1.25 year pipe rig experiment was executed to an

APA, Harvard, Vancouver, ISO, and other styles

5

Sarver, Emily Allyn. "Insights Into Non-Uniform Copper and Brass Corrosion in Potable Water Systems." Diss., Virginia Tech, 2010. http://hdl.handle.net/10919/29474.

Full text

Abstract:

Non-uniform corrosion of copper and brass in potable water systems poses both economic and environmental problems associated with premature plumbing failures and release of metals. With respect to copper pitting corrosion, it was found that forensic testing (i.e., in pipe-loops) is the only investigative technique that can closely mimic conditions found in real water systems and produce unambiguous results; and, if used in combination with electrochemical techniques, it may also provide some mechanistic insights into the pitting process. Using pipe-loops, it was demonstrated that copper pittin

APA, Harvard, Vancouver, ISO, and other styles

6

Stålnacke, Emil. "Microstructure-corrosion interrelations in new low-lead and lead-free brass alloys." Thesis, KTH, Materialvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-217355.

Full text

Abstract:

In new low-lead and lead-free brass alloys, it is not understood how the corrosion properties,such as dezincification, are related to material composition as well as annealing temperatureand duration. This study aims to fill this knowledge gap by mapping sixteen annealingconditions and three different brass alloy compositions to their respective microstructure anddezincification performance. It was found that high dezincification depth was a result ofannealing temperatures at 300°C – 400°C, which promoted precipitation of intermetallicAlAs-particles along grain boundaries, twins and lead parti

APA, Harvard, Vancouver, ISO, and other styles

7

Hollis, A. C. "Stress corrosion of titanium." Thesis, University of Leeds, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383978.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Alexis, naza. "Corrosion behavior of lead-free and dezincification resistant brass alloys in tap water." Thesis, KTH, Kemi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299738.

Full text

Abstract:

Avzinkningshärdiga och blyfria mässingslegeringar används i stor utsträckning för att ersätta blyinnehållande mässingslegeringar som används för dricksvattensapplikationer. På grund av det begränsade antalet korrosionsstudier av dessa legeringar är syftet med denna studie att belysa hur vattensammansättning, temperatur och exponeringstid kan påverka legeringarnas korrosionsegenskaper. Tre avzinkningshärdiga mässingslegeringar studerades i kranvatten; två blyfria mässingslegeringar (CW511L och CW724R) och en blyinnehållande mässingslegering (CW602N) som betraktades som ett

APA, Harvard, Vancouver, ISO, and other styles

9

Freiholtz, Oliver. "Corrosion behaviour of new lead-free brass alloys in aqueous copper (II) chloride." Thesis, KTH, Kemi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299780.

Full text

Abstract:

På grund av nya riktlinjer för användning av mässing i kontakt med dricksvatten har nya blyfria mässingslegeringar utvecklats. Det är därför av stort intresse att undersöka deras korrosionsegenskaper, såsom avzinkningshärdighet. Ett accelererat standardtest, SS-EN ISO 6509–1:2014, har använts för att bestämma avzinkningshärdighet hos mässingslegeringar. Eftersom detta standardtest utvecklades för bly-innehållande mässingslegeringar har det ännu inte fastställts huruvida denna metod också kan appliceras för fastställandet av avzinkningshärdigheten hos blyfria mässingslegeringar. Syftet med det

APA, Harvard, Vancouver, ISO, and other styles

10

Liu, Xiaodong. "Effects of stress on intergranular corrosion and intergranular stress corrosion cracking in AA2024-T3." Columbus, Ohio : Ohio State University, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1133313637.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Seong, Jinwook. "Inhibition of Corrosion and Stress Corrosion Cracking of Sensitized AA5083." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429701294.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Qiu, Ping. "Quantified In Situ Analysis of Initial Atmospheric Corrosion : Surface heterogeneity, galvanic effects and corrosion product distribution on zinc, brass and Galvalume." Doctoral thesis, KTH, Korrosionslära, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-34096.

Full text

Abstract:

The interaction of the surface of a pure metal or an alloy with the surrounding atmosphere occurs in a highly complex interfacial regime. During atmospheric corrosion this interfacial regime involves the metal surface, often covered by a naturally formed oxide layer of a few nanometers thickness; an aqueous adlayer, typically with a thickness of a few to a few tens of nanometers, and the atmosphere from which airborne particles, oxygen, and gaseous pollutants dissolve into the adlayer and influence the atmospheric corrosion process. This thesis work is mainly concerned with the initial atmosph

APA, Harvard, Vancouver, ISO, and other styles

13

Lees, Michael E. "Corrosion of Brass Meters in Drinking Water: The Influence of Alloy Composition and Water Chemistry on Metal Release and Corrosion Scale." University of Cincinnati / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1504873540139029.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Lecercle, Apolline. "Comportement en corrosion de composites mélange-acier laitonné utilisés en pneumatiques : mécanismes physico-chimiques et évaluation multi-échelle." Thesis, Bourgogne Franche-Comté, 2018. http://www.theses.fr/2018UBFCK030.

Full text

Abstract:

Les nappes métalliques assurent la structure des pneumatiques. Leur fabrication se décline en plusieurs étapes : le dépôt électrolytique du laiton sur le substrat en acier perlitique, le tréfilage humide du renfort laitonné et l’assemblage mélange-renfort. La pondération de chaque étape sur les mécanismes de corrosion a été évaluée.La composition du revêtement laiton est le premier paramètre étudié. Des caractérisations de surface telles que MEB-EBSD et XPS ont été réalisées et contribuent à l’interprétation des résultats électrochimiques. Les essais électrochimiques ont été menés dans 0,01 M

APA, Harvard, Vancouver, ISO, and other styles

15

Gamboa, Erwin. "Stress corrosion cracking of rock bolts /." [St. Lucia, Qld.], 2004. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe18302.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Wells, David Brett. "Early stages of intergranular stress corrosion cracking." Thesis, University of Oxford, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.256769.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Mohammed, Farej Ahmed. "Stress corrosion cracking in duplex stainless steels." Thesis, University of Manchester, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488331.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Ojala, Ira O. "Stress corrosion crack growth in porous sandstones." Thesis, University of Edinburgh, 2004. http://hdl.handle.net/1842/501.

Full text

Abstract:

Stress corrosion crack growth occurs when the chemical weakening of strained crack tip bonds facilitates crack propagation. I have examined the effect of chemical processes on the growth of a creack population by carrying out triaxial compression tests on Clashach and Locharbriggs sandstones at temperatures of 25-80 degrees C and at strain rates of 10-5 to 10-8/s. The axial strain, permiability, acoustic emission (AE) activity and the pore fluid chemistry were monitored continuously during these tests. Rock strength is reduced in the presence of water and on the application of a slower strain

APA, Harvard, Vancouver, ISO, and other styles

19

Wang, Yong-Zhi. "Stress corrosion crack coalescence and lifetime prediction." Thesis, University of Newcastle Upon Tyne, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.315623.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Kruska, Karen. "Understanding the mechanisms of stress corrosion cracking." Thesis, University of Oxford, 2012. http://ora.ox.ac.uk/objects/uuid:94574eaf-4ae0-4093-bf20-3f4f4c559e7c.

Full text

Abstract:

Austenitic stainless steels are frequently used in the cooling circuits of nuclear reactors. It has been found that cold-worked 304 stainless steels can be particularly susceptible to stress corrosion cracking at the operating conditions of such reactors. Despite more than 130 years of research underlying mechanisms are still not properly understood. For this reason, the effects of cold-work and applied stress on the oxidation behaviour of 304SS have been studied in this thesis. A set of samples with/without prior cold-work, and with/without stress applied during oxidation, were oxidized in au

APA, Harvard, Vancouver, ISO, and other styles

21

Deshais, Gerald. "Stress corrosion cracking in Al based alloys." Thesis, University of Cambridge, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.621509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Meisnar, Martina. "High-resolution characterisation of stress corrosion cracking." Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:6915e56d-d63b-43dc-af29-5257a21d1e4b.

Full text

Abstract:

The degradation of reactor grade stainless steels and their susceptibility to stress corrosion cracking (SCC) when exposed to the pressurised water reactor (PWR) primary water environment has been a topic of intense research for many decades. Nevertheless, our understanding of the underlying mechanisms of SCC remains incomplete to date. It has been generally accepted that only high-resolution (electron) microscopy techniques are capable of revealing the yet unidentified processes involved in SCC crack propagation. For this reason, one of the main objectives of this project was to make new tech

APA, Harvard, Vancouver, ISO, and other styles

23

Gammon, M. A. "Stress corrosion cracking of nuclear grade steels." Master's thesis, University of Cape Town, 1992. http://hdl.handle.net/11427/21956.

Full text

Abstract:

A nuclear grade 316L stainless steel and a 508-111 quenched and tempered pressure vessel steel were studied for their stress corrosion cracking susceptibility. Cylindrical tensile specimens were subjected to slow strain rate testing at 75°C in aerated, aqueous solutions (distiled water with 1000ppm Cl⁻ or SO₄ = ions in solution) in a range of corrosion potentials. The 316L has been examined for sensitization and stress corrosion resistance. This study has shown that the peak degree of sensitization attainable in this material is well within the limits considered as safe by the nuclear power in

APA, Harvard, Vancouver, ISO, and other styles

24

Jani, Shilesh Chandrakant. "A mechanistic study of transgranular stress corrosion cracking of austenitic stainless steels." Thesis, Georgia Institute of Technology, 1986. http://hdl.handle.net/1853/11236.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Yang, Di. "Cyclic stress effect on stress corrosion cracking of duplex stainless steel in chloride and caustic solutions." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/42811.

Full text

Abstract:

Duplex stainless steel (DSS) is a dual-phase material with approximately equal volume amount of austenite and ferrite. It has both great mechanical properties (good ductility and high tensile/fatigue strength) and excellent corrosion resistance due to the mixture of the two phases. Cyclic loadings with high stress level and low frequency are experienced by many structures. However, the existing study on corrosion fatigue (CF) study of various metallic materials has mainly concentrated on relatively high frequency range. No systematic study has been done to understand the ultra-low frequency (

APA, Harvard, Vancouver, ISO, and other styles

26

Lou, Xiaoyuan. "Stress corrosion cracking and corrosion of carbon steel in simulated fuel-grade ethanol." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/37279.

Full text

Abstract:

Today, ethanol, as well as other biofuels, has been increasingly gaining popularity as a major alternative liquid fuel to replace conventional gasoline for road transportation. One of the key challenges for the future use of bioethanol is to increase its availability in the market via an efficient and economic way. However, one major concern in using the existing gas-pipelines to transport fuel-grade ethanol or blended fuel is the potential corrosion and stress corrosion cracking (SCC) susceptibility of carbon steel pipelines in these environments. Both phenomenological and mechanistic investi

APA, Harvard, Vancouver, ISO, and other styles

27

Cao, Liu. "Corrosion and Stress Corrosion Cracking of Carbon Steel in Simulated Fuel Grade Ethanol." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1345141634.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

PATIL, PANKAJ Y. "MECHANISTIC INVESTIGATION OF RUBBER-BRASS ADHESION: EFFECT OF FORMULATION INGREDIENTS." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1132339683.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Mirrezaie, S. R. "Some aspects of the corrosion of Admiralty Brass in saline environment, studies by physical and electrochemical techniques." Thesis, Brunel University, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.332445.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Browning, Anne E. "Experimental investigation of stress transients in interstitial-free steel and 70/30 brass /." The Ohio State University, 1987. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487330761219273.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Rechberger, Johann. "The transition from stress corrosion cracking to corrosion fatigue in AA-7075 and AA-8090." Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/30779.

Full text

Abstract:

The effect of crack tip strain rate (CTSR) on environmentally assisted cracking was studied for alloys AA-7075 (Al-Zn-Mg-Cu) and AA-8090 (Al-Li-Cu-Mg) in the artificially aged condition. Fatigue pre-cracked double cantilever beam (DCB) specimen were employed with the crack plane parallel to the rolling plane. The cracking behaviour under monotonic and cyclic loading conditions was investigated in aqueous sodium chloride solutions with and without additions of sodium chromate as a corrosion mhibitor. CTSR values were described in terms of K-rate ∆K/∆t (ie. dK/dt) as a measured average over the

APA, Harvard, Vancouver, ISO, and other styles

32

Mathur, Deepanker. "Localized corrosion and stress corrosion cracking studies of Al-Li-Cu Alloy AF/C458." The Ohio State University, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=osu1407401974.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Harrigan, Paul A. "Stress corrosion cracking of Zirconium in nitric acid." Thesis, University of Manchester, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.503652.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Wong, T. M. "Stress corrosion cracking in a high strength steel." Thesis, University of Canterbury. Engineering, 1986. http://hdl.handle.net/10092/6429.

Full text

Abstract:

This thesis falls into four fields of study. The first is a survey of relevant literature concerning the many theories of stress corrosion cracking and hydrogen embritt1ement. This includes descriptions of the mechanisms of stress corrosion cracking (SCC) and outlines electromechanical processes and stress - sorption theory. Four widely accepted mechanisms for environment assisted cracking are also outlined. They are, 1) Embritt1ement resulting from accumulated hydrogen at embritt1ement sites, 2) Lowering of surface energy by adsorption of hydrogen, 3) Hydrogen interaction with dislocations,

APA, Harvard, Vancouver, ISO, and other styles

35

Rimoli, Julian Jose Ortiz Michael Ortiz Michael. "A computational model for intergranular stress corrosion cracking /." Diss., Pasadena, Calif. : California Institute of Technology, 2009. http://resolver.caltech.edu/CaltechETD:etd-05142009-135909.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Saithala, Janardhan R. "Pitting and stress corrosion cracking of stainless steel." Thesis, Sheffield Hallam University, 2007. http://shura.shu.ac.uk/20311/.

Full text

Abstract:

An investigation has been performed to determine the pitting resistance of stainless steels and stress corrosion cracking of super duplex stainless steels in water containing chloride ions from 25 - 170°C. The steels studied are 12% Cr, FV520B, FV566, 304L, Uranus65, 2205, Ferallium Alloy 255, and Zeron 100. All these commercial materials used in very significant industrial applications and suffer from pitting and stress corrosion failures. The design of a new experimental setup using an autoclave enabled potentiodynamic polarisation experiments and slow strain rate tests in dilute environment

APA, Harvard, Vancouver, ISO, and other styles

37

Patel, Ronak. "CORROSION DAMAGE STUDIES THROUGH MICROSCOPY AND STRESS ANALYSIS." VCU Scholars Compass, 2008. http://scholarscompass.vcu.edu/etd/1620.

Full text

Abstract:

Corrosion is the destructive result of chemical reaction between a metal or metal alloy and its environment. Airplanes, power generating plants, chemical process and manufacturing plants, concrete structure, and many others which widely uses aluminum alloy and stainless steel alloys are subjected to corrosion. The estimated cost of corrosion damage is in order of 3 to 5 percent of gross national product (GNP). Out of all forms of corrosion, pitting corrosion is most commonly observed in aluminum alloy 2024 and stainless steel type 316. There is a need to study the stress environment around the

APA, Harvard, Vancouver, ISO, and other styles

38

Blaxland, Stephen James. "The involvement of stress in uranium corrosion phenomena." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/the-involvement-of-stress-inuranium-corrosionphenomena(b6985cfe-bb59-439d-b225-deb2ad721db4).html.

Full text

Abstract:

Sub-surface precipitations of UH3 have been modelled with Finite Element methods. The model includes a pre-stressed oxide layer, metal anisotropy, metal plasticity and a hyper elastic coherent hydride. The model was used to investigate UH3 precipitating at a variety of depths from 0 to 2um (spherical shape), with a variety of sizes from 0.08 to 0.8 um diameter (spherical shape) and with a variety of shapes from horizontal ellipsoid to vertical ellipsoid (depth 0.5 um). UH3 precipitation close to the surface was found to be energetically favourable as observed in experiments. Simulations on the

APA, Harvard, Vancouver, ISO, and other styles

39

MACHADO, VERONICA MIQUELIN. "EFFECT OF ELASTIC-PLASTIC STRESS IN THE DEFECT TOLERANCE UNDER STRESS CORROSION CRACKING." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=33679@1.

Full text

Abstract:

PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>PROGRAMA DE EXCELENCIA ACADEMICA<br>Corrosão sob tensão (SCC), que consiste na iniciação e propagação de trincas devido ao efeito combinado de tensões mecânicas e o ambiente corrosivo, é um dano potencial para estruturas e componentes. Além do mais, SCC pode ser explicado por diferentes mecanismos dependendo do par material ambiente corrosivo considerado, o que dificulta o uso de um modelo geral para predizer o comportamento de trincas em SCC. Sendo assim, projetos frequentemen

APA, Harvard, Vancouver, ISO, and other styles

40

Iyer, Venkatramani S. "Effect of residual stress gradients in austenitic stainless steels on stress corrosion cracking." Thesis, Virginia Tech, 1991. http://hdl.handle.net/10919/42119.

Full text

Abstract:

<p>The effect of the residual stresses developed during simulated weld heat affected zone in austenitic stainless steel specimen on the stress corrosion cracking susceptibility was studied. Residual stresses was measured using X-ray diffraction technique. Boiling Magnesium Chloride was used as corrosive environment. Compressive stresses developed in the HAZ of the specimen and in regions away from the HAZ stress free values were obtained. The magnitude of the stress gradient decreased as the peak temperature attained during simulated welding decreased. Transgranular cracks were observed in the

APA, Harvard, Vancouver, ISO, and other styles

41

Ghasemi, Rohollah. "Hydrogen-assisted stress corrosion cracking of high strength steel." Thesis, KTH, Skolan för kemivetenskap (CHE), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-50416.

Full text

Abstract:

In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of micro-structure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. Type B, a normalize steel was used as reference. This study also supports electrochemical polarisation resistance method as an effective testing technique for measuring the uniform corrosion rate. SSRT samples were chosen

APA, Harvard, Vancouver, ISO, and other styles

42

Xiao, Ming. "Mechanism of stress corrosion cracking of aluminum alloy 7079." Thesis, Georgia Institute of Technology, 1989. http://hdl.handle.net/1853/19174.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Salinas-Bravo, Victor Manuel. "Pitting and stress corrosion cracking of duplex stainless steels." Thesis, University of Manchester, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.493165.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Yuan, Yudie. "Localised corrosion and stress cracking of aluminium-magnesium alloys." Thesis, University of Birmingham, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.433422.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Singh, Preet Mohinder. "Stress corrosion cracking of carbon steel and inconel 600." Thesis, University of Newcastle Upon Tyne, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Price, J. N. "The propagation of stress corrosion cracks in aligned GRP." Thesis, University of Liverpool, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.372730.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Jones, S. P. "Stress-corrosion and exfoliation of high strength aluminium alloys." Thesis, Cranfield University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.352939.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Phan, Dan. "Atmospheric-Induced stress corrosion cracking of Austenitic Stainless Steels." Thesis, University of Manchester, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.508598.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

French, Mark Andrew. "Environmental degradation and stress corrosion of hybrid fibre composites." Thesis, Kingston University, 1990. http://eprints.kingston.ac.uk/20537/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Carvalho, Maria Leonor. "Corrosion of copper alloys in natural seawater : effects of hydrodynamics and pH." Thesis, Paris 6, 2014. http://www.theses.fr/2014PA066304/document.

Full text

Abstract:

Cette thèse, réalisée en étroite collaboration avec le partenaire industriel RSE S.p.A (Italie), s’inscrit dans le cadre du projet européen BIOCOR ITN. Les alliages de cuivre habituellement utilisés dans les circuits de refroidissement de centrales électriques peuvent être affectés par la biocorrosion induite par la formation d’un biofilm. L’objectif de ce travail était d’étudier the comportement à la corrosion de l’alliage 70Cu-30Ni et d’un laiton contenant 2% d’aluminium en milieu marin, dans des conditions industrielles réelles (expériences sur le terrain) et en laboratoire. L’influence de

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!