Log in

Relevant bibliographies by topics / Crank hot stamping presses / Journal articles

To see the other types of publications on this topic, follow the link: Crank hot stamping presses.

Journal articles on the topic 'Crank hot stamping presses'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 24 journal articles for your research on the topic 'Crank hot stamping presses.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

V. Telegin, I., I. M. Volodin, and P. I. Zolotukhin. "The mathematical modeling for assessing the effectiveness of hot forging extruded round in plan forgings on crank presses." International Journal of Engineering & Technology 7, no. 2.2 (2018): 30. http://dx.doi.org/10.14419/ijet.v7i2.2.9896.

Full text

Abstract:

The article presents the results of the development of a mathematical model for calculating the efficiency indices of technological schemes for hot volumetric stamping (GOSH) on crank hot-stamping presses (KGSHP) round in the forgings plan (for gear, pulley and other similar parts). Software solutions obtained on the basis of this model allow choosing from several variants of technological schemes the most effective for using it in production or further improvement.

APA, Harvard, Vancouver, ISO, and other styles

2

Radkevich, M. M., and D. Ju Fomin. "Calculation based on capacity of the crank hot-stamping presses for technological processes of thermomechanical treatment." Izvestiya MGTU MAMI 7, no. 2-2 (2013): 212–16. http://dx.doi.org/10.17816/2074-0530-68232.

Full text

Abstract:

This article describes the calculation of the force stamping elongated forging at different temperatures in the open die by the M.V.Storozhev’s formula and compares the effort with stamping identical forgings as a result of the finite-element modeling. Options regarding corrections formulas are offered.

APA, Harvard, Vancouver, ISO, and other styles

3

Новокщенов, С. Л., В. В. Куц та Е. В. Смоленцев. "СОСТОЯНИЕ СОВРЕМЕННОГО УРОВНЯ РАЗВИТИЯ ТЕХНОЛОГИЧЕСКИХ ПРОЦЕССОВ И ОБОРУДОВАНИЯ КУЗНЕЧНО-ШТАМПОВОЧНОГО ПРОИЗВОДСТВА". ВЕСТНИК ВОРОНЕЖСКОГО ГОСУДАРСТВЕННОГО ТЕХНИЧЕСКОГО УНИВЕРСИТЕТА 21, № 1 (2025): 134–47. https://doi.org/10.36622/1729-6501.2025.21.1.020.

Full text

Abstract:

в современных условиях, наряду с предприятиями замкнутого производственного цикла, возникают малые предприятия, выпускающие продукцию кузнечно-штамповочного производства. Как правило, на таких предприятиях имеется определенная номенклатура кузнечно-штамповочных машин. В зависимости от масштаба предприятия они могут оснащаться кривошипными горячештамповочными прессами (КГШП) или участком для штамповки деталей методами холодной объемной штамповки (ХОШ) и участком механической обработки. В настоящее время вновь возникает необходимость повышения производительности производства для обеспечения круп

APA, Harvard, Vancouver, ISO, and other styles

4

Новокщенов, С. Л., В. В. Куц та C. C. Юхневич. "АНАЛИЗ ВЛИЯНИЯ ПАРАМЕТРОВ ТЕХНОЛОГИЧЕСКИХ ПРОЦЕССОВ НА ПРОИЗВОДИТЕЛЬНОСТЬ ОБОРУДОВАНИЯ КУЗНЕЧНО-ШТАМПОВОЧНОГО ПРОИЗВОДСТВА". ВЕСТНИК ВОРОНЕЖСКОГО ГОСУДАРСТВЕННОГО ТЕХНИЧЕСКОГО УНИВЕРСИТЕТА 21, № 1 (2025): 161–70. https://doi.org/10.36622/1729-6501.2025.21.1.023.

Full text

Abstract:

ввиду того, что современное основное технологическое оборудование кузнечно-штамповочного производства изготавливалось с применением импортных комплектующих, в настоящее время многие предприятия столкнулись со значительным увеличением сроков изготовления, связанным с обходом действующих ограничений. Но есть еще резервы, которые позволят существенно сократить сроки разработки и изготовления механических прессов и повысить качество. Решается эта задача за счёт уточнения и дополнения методики проектирования, разработки специализированного программного обеспечения, которое позволит сократить время

APA, Harvard, Vancouver, ISO, and other styles

5

Renna, Paolo, and Michele Ambrico. "Special Issue “Feature Review Papers in Mechanical Engineering”." Applied Sciences 14, no. 11 (2024): 4872. http://dx.doi.org/10.3390/app14114872.

Full text

Abstract:

The study and advancement of crank-slide actuating mechanisms based on four-link structural groups are promising for the development of new designs of crank presses and other stamping and forging machines [...]

APA, Harvard, Vancouver, ISO, and other styles

6

Pasika, Viacheslav, Andy Augousti, Olena Lanets, and Oleh Parashchyn. "REDUCING THE KINETIC POWER OF THE CRANK PRESS MACHINE." Ukrainian Journal of Mechanical Engineering and Materials Science 9, no. 3 (2023): 21–30. http://dx.doi.org/10.23939/ujmems2023.03.021.

Full text

Abstract:

Crank presses belong to the class of machines in which the payload (stamping force) acts for a short period of time at the end of the working stroke. Since the power of a force is the product of the force times the speed, it is possible to reduce the power of a specific force only by reducing the speed of the point of action of the force. The kinematic characteristics of slider-crank mechanisms (SCMs), which are the main mechanism of crank presses, are qualitatively the same and cannot be changed. The speed of the slider, as a working body, is the most influenced by the rotation frequency and

APA, Harvard, Vancouver, ISO, and other styles

7

Telegin, Igor, and Viktor Telegin. "Physical modeling low-waste technological process of the round forging hot stamp." MATEC Web of Conferences 346 (2021): 01023. http://dx.doi.org/10.1051/matecconf/202134601023.

Full text

Abstract:

The paper presents the results of an experimental study highly efficient technological process manufacture of the round forging on a crank hot-stamping press. The high efficiency of this technological process is achieved by reducing its metal consumption. To this end, at the final stamping transition, the forging forging radii were reduced and, accordingly, the allowances for subsequent machining were minimized.

APA, Harvard, Vancouver, ISO, and other styles

8

Koryagina, O. M. "The selection of the main axis and the forming plane in automatic profiling and stamping lines." Glavnyj mekhanik (Chief Mechanic), no. 7 (June 11, 2021): 44–48. http://dx.doi.org/10.33920/pro-2-2107-04.

Full text

Abstract:

The article defines the main axis and the profiling plane in automatic profiling and stamping lines. Specific recommendations are given for choosing the position of the main axis and the profiling plane, depending on the configuration of the manufactured parts of the roll-formed section. Under the general name of profiling in the practice of stamping works, it is meant to obtain rigid and light profiles of large length and various configurations from sheet blanks. Profiling is carried out in four ways: in dies on crank presses, in dies on special bending presses, on universal bending machines

APA, Harvard, Vancouver, ISO, and other styles

9

Malikov, S. A., and I. M. Volodin. "Development of technology for the manufacture of forgings with spikes on the basis of piecemeal stamping." Izvestiya MGTU MAMI 7, no. 2-2 (2013): 80–84. http://dx.doi.org/10.17816/2074-0530-68054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gryaznov, V. V., V. A. Konovalov, D. A. Kormakov, I. V. Markechko, and E. N. Merkushev. "Stamping of forgings with side outlets of tee-type in a split tool." Omsk Scientific Bulletin, no. 194 (2025): 18–25. https://doi.org/10.25206/1813-8225-2025-194-18-25.

Full text

Abstract:

The article considers the options for analyzing design and technological solutions for hot volume stamping of tees in split dies on a double-action crank hot stamping press. The analysis technique is based on assessing the parameters of shaping with acceptable changes in the shape and size of the shaping tool engraving and the dimensions of the blanks. Modern research methods are used, accompanied by a technology design cycle from setting the initial conditions to creating a 3D model of stamped forgings and manufacturing the tool. The developed algorithm for designing the technology allows for

APA, Harvard, Vancouver, ISO, and other styles

11

Fan, Suo, Jian Hua Mo, and Zong Qiang Wang. "The Application of Toggle Mechanical Press in Hot Forming of High Strength Steel." Advanced Materials Research 1063 (December 2014): 358–61. http://dx.doi.org/10.4028/www.scientific.net/amr.1063.358.

Full text

Abstract:

This paper discusses mechanical digital servo press control system and operating characteristics and adaptability to the hot forming requirements of high strength steel using the toggle mechanical presses [1-4]. A servo motor drive control strategy is made to adapt the stamping process. This paper describes results acquired by applying toggle mechanical servo press developed by author to the hot forming of high strength steel [5-7].

APA, Harvard, Vancouver, ISO, and other styles

12

Kobzev, K. O. "Increasing stable operation of the working body in crank presses." Vestnik of Don State Technical University 19, no. 4 (2020): 374–81. http://dx.doi.org/10.23947/1992-5980-2019-19-4-374-381.

Full text

Abstract:

Introduction. Static and dynamic loading systems of the safety friction clutch (SFC) are investigated. A schematic diagram of the frictional contact of solids in the forging and stamping machines is synthesized. From the point of view of increasing the operational stability of the working body in crank presses, the following factors are considered: response time, current friction factor and a change in torque under static and dynamic loading of the safety clutch.Materials and Methods. The response time of the SFC with differentiated friction pairs is determined. The sought indicator correspond

APA, Harvard, Vancouver, ISO, and other styles

13

Telegin, Igor, and Tatyana Shumilova. "Comparing the efficiency of flowsheets for hot die forging on crank presses." MATEC Web of Conferences 224 (2018): 01092. http://dx.doi.org/10.1051/matecconf/201822401092.

Full text

Abstract:

The process of manufacturing a part as a semi-finished product (a forging) using hot die forging with further machining can be performed on various types of press forging equipment following several flowsheet variants. The task of selecting the best (most effective) variant is not always obvious. The paper considers the methods of the comparative estimation of the efficiency of several variants of manufacturing a forging of the same part on the basis of the following groups of indicators: metal consumption and forging force.

APA, Harvard, Vancouver, ISO, and other styles

14

Mori, Kenichiro. "Application of Servo Presses to Sheet Metal Forming." Key Engineering Materials 473 (March 2011): 27–36. http://dx.doi.org/10.4028/www.scientific.net/kem.473.27.

Full text

Abstract:

Mechanical AC servo presses having high flexibility for control of motion have been recently developed. In these presses driven by servo motors, the slide motion is accurately controlled by real-time feedback of ram position measured with sensors like the conventional machine tools, and thus complicated motion is attainable. The application of servo presses to sheet metal forming processes is reviewed in the present paper. The springback in bending was reduced by bottoming and re-striking. In deep drawing, the forming limit of high strength steel sheets was improved by detaching tools from the

APA, Harvard, Vancouver, ISO, and other styles

15

Egorov, M. S., R. V. Egorova, and M. V. Kovtun. "Influence of Carbon Content on the Formation of a Contact Interparticle Surface during Hot Post-Pressing." Safety of Technogenic and Natural System, no. 2 (June 6, 2023): 90–101. http://dx.doi.org/10.23947/2541-9129-2023-7-2-90-101.

Full text

Abstract:

Introduction. The technology for producing hot-formed powder steel is one of the most energy-intensive in powder metallurgy, which includes a large number of operations. The study of the influence of technological modes on the final properties of the part is an urgent task. Developed by the scientific team under the leadership of Yu. G. Dorofeev at the end of the XX century, the technology of manufacturing hot-formed powder steels is currently one of the main ones in the production of high-density products. However, the use of new materials that improve the mechanical properties of products re

APA, Harvard, Vancouver, ISO, and other styles

16

Gurulev, Dmitrii, Yuriy Levin, Stanislav Rogachev, and Vladislav Vodovatov. "Investigation of stresses and deformation forces in energy-intensive pressing processes with backflow of metal." E3S Web of Conferences 515 (2024): 02023. http://dx.doi.org/10.1051/e3sconf/202451502023.

Full text

Abstract:

Although a large number of studies have been carried out to optimize the processes of pressing metals and alloys, the recommendations for industrial use are ambiguous and cannot be extended to the entire product range. To a special extent, this applies to hollow products such as cups with a flange for the manufacture of which, the most rational and economical (but at the same time very energy-intensive) is the process of pressing with the reverse expiration of metal on hot-stamping presses (CHSP). Therefore, the relevance of theoretical studies of the stress-strain state of metal remains in re

APA, Harvard, Vancouver, ISO, and other styles

17

Kachanov, I. V., and V. V. Vlasov. "Power mode of high-speed extrusion of axisymmetric bimetallic rod products for instrumental purposes." Proceedings of the National Academy of Sciences of Belarus. Physical-technical series 70, no. 1 (2025): 28–36. https://doi.org/10.29235/1561-8358-2025-70-1-28-36.

Full text

Abstract:

A mathematical model developed to calculate the force impact on a punch during high-speed impact extrusion of axisymmetric stepped rod tools (punches, pushers, cutters, etc.) is described in the article. The model is based on a twostage transformation, which is implemented according to the scheme “rectangle – square”, “square – circle”. At the same time, the transformation from square to circle is implemented under the condition of equality of cross-sectional areas, which allows keeping practically unchanged the kinematically possible field of slip lines, including velocity and acceleration ho

APA, Harvard, Vancouver, ISO, and other styles

18

Gronostajski, Z., M. Hawryluk, M. Kaszuba, et al. "An Analysis Of The Industrial Forging Process Of Flange In Order To Reduce The Weight Of The Input Material." Archives of Metallurgy and Materials 60, no. 2 (2015): 849–53. http://dx.doi.org/10.1515/amm-2015-0217.

Full text

Abstract:

Abstract This paper presents an analysis of the industrial process of hot forging a flange. The authors developed several thermomechanical models of the forging process for which they carried out computer simulations using the MSC.Marc 2013 software. In the Jawor Forge flanges with a neck are manufactured by hot forging in crank presses with a maximum load of 25 MN. The input material, in the form of a square bar, is heated up to a temperature of 1150°C and then formed in three operations: upsetting, preliminary die forging and finishing die forging. The main aim of the studies and the numeric

APA, Harvard, Vancouver, ISO, and other styles

19

Rassudov, N. V., N. N. Sokolov, E. A. Pankratov, and I. V. Il'in. "Effect of blank shape during hot stamping of gas turbine engine blades on structural inhomogeneity." Blanking productions in mechanical engineering (press forging, foundry and other productions), 2022, 355–58. http://dx.doi.org/10.36652/1684-1107-2022-20-8-355-358.

Full text

Abstract:

The issues of manufacturing of blanks for hot stamping of gas turbine engine blades are considered. The analysis of the applied shapes of blanks and its stamping on hot stamping crank presses and screw presses is carried out. Various shapes of blanks is simulated based on the results of the analysis.

APA, Harvard, Vancouver, ISO, and other styles

20

I.M., Volodin, та Telegin I.V. "STUDY OF INFLUENCE OF GEOMETRIC PARAMETERS' TOOL FOR HOT VOLUME STAMPING OF ORBICULAR IN TERMS OF FORGING ON СRANK PRESS DYNAMICS". Global Journal of Engineering Science and Researches 4, № 1 (2017). https://doi.org/10.5281/zenodo.252251.

Full text

Abstract:

The magnitude of dynamic loads is one of the factors that reduce the reliability and durability of the crank hot presses, which can be controlled by selecting from a set of possible, more efficient version of the technological scheme of stamping products. In this paper the nonlinear model of the plastic deformation process forging on crank hot press designed for the calculation of indicators that determine the level of dynamic processes in the elements of the press, depending on the geometrical parameters of the tool used to form forgings, as well as the results of the design process flowsheet

APA, Harvard, Vancouver, ISO, and other styles

21

Novokshchenov, S. L., E. Kh Milushev, S. N. Yatsenko, and A. Yu Boyko. "Design automation of crank hot stamping presses using specialized Mech-press software." Blanking productions in mechanical engineering (press forging, foundry and other productions), 2024, 458–65. https://doi.org/10.36652/1684-1107-2024-22-10-458-465.

Full text

Abstract:

The issues of improving in the quality of forging and stamping products while maintaining high production rates with the possibility of expanding the range of forgings produced. A specially developed mathematical apparatus is presented based on the analysis of the qualitative (Ishikawa diagram) and quantitative (Pareto diagram) influence of the parameters and factors of the technological process and the main technological equipment used, allows improving on the quality of forgings manufactured in modern forging and stamping shops of machine-building enterprises.

APA, Harvard, Vancouver, ISO, and other styles

22

"Development of a system for protection of a hot stamping press from technological overloads in terms of torque." Vestnik Mashinostroeniya, March 2025, 225–37. https://doi.org/10.36652/0042-4633-2025-104-3-225-237.

Full text

Abstract:

The problem of developing of a system for protection of a crank hot stamping press from process overloads is being solved. The possibilities of upgrading of the ВЗТМП К-8544 crank hot stamping press (CHSP) for its protection from overloads are studied. A system for protecting of CHSP from torque overloads based on contactless monitoring of the rotation frequency of the receiving shaft is proposed. Keywords crank hot stamping press, crank-slider mechanism, shaft, drive, dynamic load, frequency sensor, contactless signal transmission e678xk@mail.ru, erof.vi@yandex.ru, acidwolfvx@rambler.ru, oxul

APA, Harvard, Vancouver, ISO, and other styles

23

"Improvement of the comprehensive automation control system for dynamic processes of hot deformation processing on thermoelastic presses." Automation. Modern Techologies, 2022, 483–89. http://dx.doi.org/10.36652/0869-4931-2022-76-11-483-489.

Full text

Abstract:

The researches results of the automated control system improvement for a thermoelastic press in the implementation of the processes of isothermal deformation and metallic materials stamping in a state of superplasticity are considered. It is established that the deviation from the optimal temperature-speed deformation regimes leads to the defect formation in the article body in the form of sinks, clamps, oxide films drawn into the article from the surface of the semi-finished product. These defects are stress concentrators that can lead to the destruction of loaded parts. The main problem that

APA, Harvard, Vancouver, ISO, and other styles

24

AGHBALYAN, S. G., G. A. VASILYAN, V. A. SIMONYAN, and A. S. AGHBALYAN. "DEVELOPING A TECHNOLOGY FOR OBTAINING ALUMINUM ANTIFRICTION POWDER COMPOSITE MATERIALS AND THEIR CHARAKTERISTICS." PROCEEDINGS OF THE REPUBLIC OF ARMENIA NATIONAL ACADEMY OF SCIENCES AND NATIONAL POLYTECHNIC UNIVERSITY OF ARMENIA. SERIES OF TECHNICAL SCIENCES, 2024. https://doi.org/10.53297/0002306x-2024.v77.3-255.

Full text

Abstract:

A technology has been developed for producing powder composite materials of the Al-Cu-Cr–MoS2 composition based on the methods of compaction by hot processing of porous presses. It includes the preparation of a powder mixture, pressing of porous materials, coating with protective lubricating coatings, sintering, hot extrusion or hot stamping, and hardening heat treatment. New compositions of protective and lubricating coatings based on natural silicate rocks have also been developed. Volcanic slag and basalt powders with particle sizes up to 63 microns were taken as starting materials. The mix

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!