Log in

Relevant bibliographies by topics / CRM technologies / Dissertations / Theses

To see the other types of publications on this topic, follow the link: CRM technologies.

Dissertations / Theses on the topic 'CRM technologies'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'CRM technologies.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

COSTA, TITO MENDES DA. "SOCIAL CRM THROUGH SELF-SERVICE TECHNOLOGIES." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2014. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=24495@1.

Full text

Abstract:

As gerações atuais (Y, Z, Me...) são conhecidas como as Gerações Silenciosas pois fazem uso extensivo de mecanismos de mídias sociais e serviços de mensagem (SMS e mais recentemente Whatsapp) em lugar de serviços de voz. Tais gerações, que começam a ser responsáveis por grande parte do mercado consumidor, se sentem mais à vontade com a troca de mensagens vis-à-vis as relações diretas que normalmente ocorrem na comercialização de serviços e suporte pós-venda, facilitando a ampliação do escopo de soluções de auto-serviço e auto-atendimento para esse público. Nesse prisma, torna-se interessante e

APA, Harvard, Vancouver, ISO, and other styles

2

Silfvergren, Alex. "Utveckling av goda leverantörsrelationer via CRM-system." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-347865.

Full text

Abstract:

Gotlands Slagteri är ett företag som bedriver produktion av kött och charkvaror. Verksamheten bygger på långsiktiga relationer mellan såväl leverantörer som kunder, och som vilken relation som helst krävs omtanke och underhållsarbete för att de skall kvarstå. Syftet med den här studien är att titta på Gotlands Slagteris leverantörsrelationer och göra en utomstående bedömning för slakteriets räkning, samt att se om dokumentationshanteringen av leverantörerna kan förbättras. Syftet mynnar följaktligen ut i tre frågeställningar; Hur ser nuläget av relationen mellan Gotlands Slagteri och deras lev

APA, Harvard, Vancouver, ISO, and other styles

3

Sydorenko, M. A. "Intellectual Technologies as the Key Sales Driver in 2017." Thesis, Київський національний університет технологій та дизайну, 2017. https://er.knutd.edu.ua/handle/123456789/8386.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Natali, Carlotta <1995&gt. "Organizational consequences of new technologies: the introduction of a CRM system in Slam Jam Srl." Master's Degree Thesis, Università Ca' Foscari Venezia, 2021. http://hdl.handle.net/10579/19347.

Full text

Abstract:

The main objective of this dissertation is to deeply analyze the relationship between the adoption of new technologies and the consequent organizational implications. The discussion is made of three main parts, with an increasing defined focus. The first part regards a detailed analysis of all the aspects, features, dynamics and risks which may arise during the implementation of an innovative process and, in particular, during the adoption of a new technology. This initial evaluation entails developments and decisional processes which characterize companies, no matter their dimensions or the i

APA, Harvard, Vancouver, ISO, and other styles

5

Jönsson, André. "Employee´s perspective towards organisational change : Evidence in Mekano Company." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69472.

Full text

Abstract:

Purpose: The purpose of this research project is to examine the employees´ perspective on the subject of a CRM implementation in SMEs. Methodology: A 5-point Likert scale questionnaire was used to collect 51 employee responses. All the questions were derived from previous existing literature. The questionnaire ended with three open-ended questions and was delivered to the employees by email. Conclusion: The main findings related to employees´ preconditions is that senior and middle managers must be involved and support their employees during the whole change process. Other conditions are that

APA, Harvard, Vancouver, ISO, and other styles

6

Šafránek, Filip. "Aplikace nových komunikačních technologií do firemní počítačové sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2009. http://www.nusl.cz/ntk/nusl-222372.

Full text

Abstract:

The target of master's thesis is implementation solution of communication VoIP technologies and connection recording system and CRM system in order to saving costs for company INTERNET TRADING s.r.o..

APA, Harvard, Vancouver, ISO, and other styles

7

Vedanthachari, LakshmiNarasimhan. "An investigation into the benefits accrued by medium sized Manufacturing Enterprises implementing ERP, CRM and e-Procurement Technologies." Thesis, University of Bolton, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.494267.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Демидова, Р. Э., та R. E. Demidova. "Автоматизация бизнес-процесса по работе с клиентами с применением CRM-системы : магистерская диссертация". Master's thesis, б. и, 2020. http://hdl.handle.net/10995/93437.

Full text

Abstract:

В современном мире рынок фотографических услуг развивается семимильными шагами. Фотосалоны и фотостудии особенно актуальны среди начинающих бизнесменов. Чтобы повысить продажи, многие компании все чаще предлагают возможность записать клиента онлайн с помощью CRM. CRM-система актуальна по разным причинам: развитие бизнес-процессов, роли интернета и использование мобильных устройств в бизнесе, развитие и удешевление технологий обработки данных и ИТ-инфраструктуры. И, конечно же, большую роль сыграл тот факт, что технические возможности CRM-систем достигли совершенства. Они позволяют отследить пу

APA, Harvard, Vancouver, ISO, and other styles

9

Makyšová, Jana. "L'utilisation des TIC en communication : une CRM collective pour le développement du tourisme en Slovaquie." Evry, Institut national des télécommunications, 2007. http://www.theses.fr/2007TELE0015.

Full text

Abstract:

La communication permet d’obtenir un avantage concurrentiel dans un monde contemporain hyperconcurrentiel. Les TIC, par leurs caractéristiques et leur influence, peuvent renforcer cet avantage s’ils sont acceptés par les utilisateurs. Le but de cette thèse est double : - développer et implémenter un outil de communications, basé sur les TIC, une CRM collective (gestion des relations clients) dans le secteur du tourisme en Slovaquie (dans la région de Zilina). La CRM collective représente une solution d’amélioration des services d’hébergement touristiques en adaptant la communication management

APA, Harvard, Vancouver, ISO, and other styles

10

Edlund, Paul, and Härgestam Axel Holmner. "Customer Relationship Management and Automated Technologies : A qualitative study on chatbots’ capacity to create customer engagement." Thesis, Umeå universitet, Företagsekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-172386.

Full text

Abstract:

The digital age has brought many new technologies that are disrupting the way that companies interact with customers. Automated technologies are one aspect of technological development in recent days, and it has changed how regular business operations are performed. Chatbots, for instance, has changed the way that customers interact with companies. Facilitating interaction and being available around the clock to serve customers who have questions. This study investigated how automated technologies are used in CRM-activities of companies and how the implementation of such technologies can lead

APA, Harvard, Vancouver, ISO, and other styles

11

Kervel, Barth Alette Jerring van. "Cloudbaserte systemer – deskriptiv beslutningsmodell : Fra litteraturens, kundens og leverandørens perspektiv." Thesis, Mittuniversitetet, Institutionen för informationssystem och –teknologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-36443.

Full text

Abstract:

Technology that is widely discussed in the business community today is cloud computing and cloud-based systems, as a cloud-based CRM-system. Considering that large companies, such as Google, Netflix and Microsoft, use this type of technology, it is important to ask whether such systems add something to the business or whether it is just an IT trend. The purpose of this study is therefore to create a decision model that will determine whether the company will implement a cloud-based system or maintain it in on-premises. The decision model should shed light on various criteria for cloud-based so

APA, Harvard, Vancouver, ISO, and other styles

12

Freitas, Filipe André Martins de. "O processo de elaboração de uma arquitectura de informação tendo em vista o CRM de duas empresas de telecomunicações portuguesas." Master's thesis, Instituto Superior de Economia e Gestão, 2009. http://hdl.handle.net/10400.5/1150.

Full text

Abstract:

Mestrado em Ciências Empresariais<br>Os relacionamentos constituem uma das principais formas de diferenciação adoptadas pelas organizações na actualidade, sendo o CRM (Customer Relationship Management) a estratégia utilizada na procura da fidelização de relacionamentos com clientes. O sector das telecomunicações tem sofrido grandes alterações e tem sido marcado por uma vaga de fusões e alianças de empresas, parcerias estratégicas, entrada de novos actores e regulamentação assimétrica. O presente trabalho faz uma reflexão sobre como se processa a elaboração de uma arquitectura de informação, te

APA, Harvard, Vancouver, ISO, and other styles

13

Манжос, І. В. "Маркетинг некомерційного підприємства КНП «Міська лікарня №5» Одеської міської ради". Thesis, Одеський національний економічний університет, 2020. http://dspace.oneu.edu.ua/jspui/handle/123456789/12666.

Full text

Abstract:

У роботі розглядаються сутність некомерційного маркетингу; класифікація та особливості некомерційного маркетингу; особливості маркетингової взаємодії некомерційної сфери з іншими секторами економіки. Проаналізовано діяльності комунального некомерційного підприємства «Міська лікарня № 5» Одеської міської ради; надано характеристику комплексу маркетингу комунального некомерційного підприємства «Міська лікарня № 5» Одеської міської ради та досліджено сучасні тенденції ринку медичних послуг в Україні. Рекомендовано удосконалення діяльності комунального некомерційного підприємства на засадах марк

APA, Harvard, Vancouver, ISO, and other styles

14

Spurný, Pavel. "Výběr a implementace IS pro projektovou stavební firmu." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-260152.

Full text

Abstract:

This thesis deals with the issue of information systems targeted at Small and medium-sized enterprises (SMEs). The theoretical part defines basic terminology and creates thereby the theoretical base of the issue of a company´s information systems (IS). Then an analysis of the influence of implementation of information technologies into SMEs is carried out determining the development of the region. The practical part of the thesis is based on a case study dealing with the implementation of the information system QI for a medium-sized project construction company. The case study captures the who

APA, Harvard, Vancouver, ISO, and other styles

15

Голуб, Д. Р. "Діджиталізація і принципи оптимізації бізнес-процесів надання послуг з експертизи на прикладі Чернігівської регіональної торгово-промислової палати". Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/24946.

Full text

Abstract:

Голуб, Д. Р. Діджиталізація і принципи оптимізації бізнес-процесів надання послуг з експертизи на прикладі Чернігівської регіональної торгово-промислової палати : випускна кваліфікаційна робота : 076 «Підприємництво, торгівля та біржова діяльність» / Д. Р. Голуб ; керівник роботи І. В. Соломаха ; НУ "Чернігівська політехніка", кафедра підприємництва і торгівлі. – Чернігів, 2021. – 87 с.<br>Найважливішим стимулом розширення та переформатування міжнародних економічних відносин сьогодні є так звана діджиталізація або цифровізація, яка є результатом швидких, інноваційних проривів і наукових відкри

APA, Harvard, Vancouver, ISO, and other styles

16

Mikyska, Vladimír. "Posouzení informačního systému firmy a návrh změn." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-225314.

Full text

Abstract:

This master’s thesis is focused on information system assessment and proposal for its changes in real company enviroment. Theoretical part describes issue and notions from information systems, analytical instruments, processes and projects enviroment. In analytical part is situated introduction of the company and analysis of current state its information system and processes. Based on findings from analysis are made recomendations and proposals for possible changes.

APA, Harvard, Vancouver, ISO, and other styles

17

Kalina, Adam. "Technologie výroby zadané součásti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231748.

Full text

Abstract:

This document describes the design of new production technology specific part in an engineering company. The specific part is manufactured on a machining center by milling method. To create model was used SolidWorks software and to create CNC program was used SolidCAM program. There is production process created with new and old technologies. There is a comparison of both technologies in conclusion.

APA, Harvard, Vancouver, ISO, and other styles

18

Urbas, Mindaugas. "Ryšių su klientais valdymo perspektyva pasitelkiant informacines technologijas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2014. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2011~D_20141223_181149-33753.

Full text

Abstract:

Darbe akcentuojami įmonės kaupiamos informacijos apie klientą sektoriai bei jos efektyvaus panaudojimo būdai. Išskiriami informacinių technologijų privalumai klientų segmentavimui. Sudarytas teorinis modelis kaip pasitelkus informacines technologijas turėtų būti valdoma ryšių su klientais informacija įmonės vidiniuose procesuose. Darbe išskiriamos pagrindinės ryšių su klientais valdymo sritys, kurios gali būti sustiprintos įmonės procesuose pasitelkus informacines technologijas. Įmonės sudarytą teorinį modelį gali taikyti praktikoje siekiant optimizuoti įmonėje vykstančius procesus. Tyrimo met

APA, Harvard, Vancouver, ISO, and other styles

19

Kovshevnaya, Valentina. "Řízení vztahů se zákazníky." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-16491.

Full text

Abstract:

This diploma thesis deals with Customer Relationship Management (CRM). The main purpose of the diploma thesis is to explore CRM theoretically, which means to explain its fundamentals, principals and goals, identify CRM processes and investigate their flow in each of the phases of CRM, to explain CRM technology and show that the implementation of CRM in organization is demanding on human resourses. The purpose is achieved by systematisation of the theoretical knowledge about CRM using a method of studying of specialized literature. The theoretical knowledge is consequently applied to investigat

APA, Harvard, Vancouver, ISO, and other styles

20

Qiao, Dongjiang. "GaN processing technologies /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2002. http://wwwlib.umi.com/cr/ucsd/fullcit?p3071033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Andrews, Michelle. "Mobile Technologies and Consumer Insights." Diss., Temple University Libraries, 2015. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/332146.

Full text

Abstract:

Business Administration/Marketing<br>Ph.D.<br>Mobile technology is changing the way consumers consume content and connect with others. At the same time, marketers admit that effectively implementing mobile targeting and promoting deals through mobile devices remains a challenge. To address these challenges and reveal consumer insights in the mobile marketing space, I propose a research stream via three essays that investigate the contextual factors that influence consumer receptivity to mobile messages. One of these factors is environmental contexts, such as the crowdedness of a consumer's env

APA, Harvard, Vancouver, ISO, and other styles

22

Fisher, Hilton. "An Assessment of the state of e-government in South Africa the case of the Government Employees Pension Fund /." Thesis, Pretoria : [s.n.], 2005. http://upetd.up.ac.za/thesis/available/etd-06192006-154208.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Kakáč, Martin. "Technologie frézování na CNC obráběcím centru metodou VoluMill." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241662.

Full text

Abstract:

The diploma thesis deals with technological preparation of the production at a CNC machining center, equipped with FANUC control system. In cooperation with company AB KOMPONENTY s.r.o. has been used CAM software GibbsCAM and its extensions VoluMill. The first chapter is devoted to the basic properties of aluminum, aluminum alloys and their using in the industry. Furthermore, the chip foramtion in milling is analysed. The following is an analysis of trochoidal milling and research of CAM systems VoluMill and iMachining - systems based on a medium thickness of chip in rough milling opeartions.

APA, Harvard, Vancouver, ISO, and other styles

24

Bernath, Robert Thomas. "High-Intensity Ultra-Fast Laser Interaction Technologies." Doctoral diss., University of Central Florida, 2007. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/2173.

Full text

Abstract:

To our knowledge this is the first comprehensive study of laser-induced effects generated at intermediate distances using self-channeled femtosecond laser pulses. Studies performed were made both experimentally and theoretically with the use of novel modeling techniques. Peak laser pulse powers above 3 GW allow beam propagation without divergence for up to several kilometers. In this regime, experiments were performed at 30 meters from the laser system in a custom propagation and target range, utilizing the Laser Plasma Laboratory's Terawatt laser system. Experiments included investigations of

APA, Harvard, Vancouver, ISO, and other styles

25

Björklund, Andreas, and Viktor Ljunggren. "Förbättring av ritningshantering hos ABB Industrial Automation Control Technologies." Thesis, Uppsala universitet, Industriell teknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-360117.

Full text

Abstract:

Cost of poor quality describes what the lack of quality costs an organization. By understanding what the concept is and how it can be translated into a specific organization, it creates the conditions for eliminating them, and it can generate a saving of up to 30% of the organization's turnover. The study has been carried out at ABB Industrial Automation Control Technologies in Västerås within the group ABB AB. This work has focused on visualizing the problem and how it could be attacked. The purpose of the thesis is, "… to generate evidence about the management of drawings, as well as to prop

APA, Harvard, Vancouver, ISO, and other styles

26

Meyer, Oliver. "Kurzfaser-Preform-Technologie zur kraftflussgerechten Herstellung von Faserverbundbauteilen." [S.l. : s.n.], 2008. http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-34329.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Jurča, Adam. "Návrh technologie výroby lůžka pro vyměnitelnou břitovou destičku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241937.

Full text

Abstract:

The thesis focuses on the design technology of the tooth gap mills. The theoretical part summarizes issues of material, milling and CAM technology. The practical part of the design process for the production of variants using CAM system. Parts are finally produced on 5-axis milling machine. At the end there is technical-economic evaluation of production.

APA, Harvard, Vancouver, ISO, and other styles

28

Trunda, Jiří. "Technologie výroby frézováním na CNC strojích." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228382.

Full text

Abstract:

Objective graduation theses, is determining and propound optimal alternate manufacturing section servant as base of electron microscope. As a production method is used chippy cutting on numerical controlled machine behind by the help of usage progressive cutting tools. To construction control program was use 3D CAD/CAM system of Solid Vision, Ltd. Corporation. Product working is complete project and procedure on manufacturing section, that is in finish well-founded technoeconomic evaluation.

APA, Harvard, Vancouver, ISO, and other styles

29

Wolfe, Joanna Lynn. "Pedagogical uses of annotations and annotation technologies /." Full text (PDF) from UMI/Dissertation Abstracts International, 2001. http://wwwlib.umi.com/cr/utexas/fullcit?p3008469.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Jiménez, Daniel Angel. "Delay-sensitive branch predictors for future technologies." Full text (PDF) from UMI/Dissertation Abstracts International, 2002. http://wwwlib.umi.com/cr/utexas/fullcit?p3081043.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Ventruba, Petr. "Výroba prototypu lovecké kuše." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444290.

Full text

Abstract:

This master's thesis deals with the manufacturing of a hunting crossbow prototype. The first part summarizes the history of crossbows, their historical development and usage. The following chapter contains theoretical knowladge about the technological methods that are used in the production. This is followed by a designing of the prototype, creating a technological process and final production. Final part of this thesis evaluates individual parts of the production and the final prototype.

APA, Harvard, Vancouver, ISO, and other styles

32

Oh, Chang Jin, Andrew E. Lowman, Matt Dubin, et al. "Modern technologies of fabrication and testing of large convex secondary mirrors." SPIE-INT SOC OPTICAL ENGINEERING, 2016. http://hdl.handle.net/10150/622427.

Full text

Abstract:

Modern large telescopes such as TAO, LSST, TMT and EELT require 0.9m-4m monolithic convex secondary mirrors. The fabrication and testing of these large convex secondary mirrors of astronomical telescopes is getting challenging as the aperture of the mirror is getting bigger. The biggest challenge to fabricate these large convex aspheric mirrors is to measure the surface figure to a few nanometers, while maintaining the testing and fabrication cycle to be efficient to minimize the downtime. For the last a couple of decades there was huge advancement in the metrology and fabrication of large asp

APA, Harvard, Vancouver, ISO, and other styles

33

Schaub, Jeremy Daniel. "Photodetectors and monolithic optical receivers in silicon technologies /." Digital version accessible at:, 2000. http://wwwlib.umi.com/cr/utexas/main.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Sajtar, Eric T. "Toolbox to evaluate treatment technologies for PRB CBM water." Laramie, Wyo. : University of Wyoming, 2008. http://proquest.umi.com/pqdweb?did=1594485851&sid=1&Fmt=2&clientId=18949&RQT=309&VName=PQD.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Nakhoul, Imad. "Business Value of the CRM Approach : the Case of 5 Stars Hotels in Lebanon." Phd thesis, Université de Grenoble, 2011. http://tel.archives-ouvertes.fr/tel-00677715.

Full text

Abstract:

Business Value of the CRM Approach - the Case of 5 Stars Hotels in Lebanon Customer Relationship Management (CRM) is an organizational-wide ongoing process. It provides a systemic approach to aligning business processes, technologies, and the customer. The application of the CRM approach in the hospitality sector accompanies the guest cycle in all its stages. It is an ongoing process defined by two main activities: the analysis and the action which are repeated as long as the relationship exists between the hotel and its customer. The success of this ongoing approach in increasing customer loy

APA, Harvard, Vancouver, ISO, and other styles

36

Jonasse, Richard Jacob. "Making sense : geographic technologies, planning, and strategic action /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2001. http://wwwlib.umi.com/cr/ucsd/fullcit?p3013700.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Gaynor, Daniel Edward. "The pricing, provisioning, and tying of new technologies." Access restricted to users with UT Austin EID Full text (PDF) from UMI/Dissertation Abstracts International, 2001. http://wwwlib.umi.com/cr/utexas/fullcit?p3032397.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Marek, Jaroslav. "Posouzení informačního systému firmy a návrh změn." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-224944.

Full text

Abstract:

This diploma thesis is focused on evaluation of the Allrisk, ltd. information system and on the changes proposal. The theoretical part of the work describes an essential background and an explanation of individual methods used for analysis of information systems. Shortcomings revealed by the analysis are worked up and measures are taken to improve the current state.

APA, Harvard, Vancouver, ISO, and other styles

39

Wanekaya, Adam. "Novel hyphenated technologies for sensing, separation and sample treatment." Diss., Online access via UMI:, 2005. http://wwwlib.umi.com/cr/binghamton/main/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Benjamin, Bret. "Documenting development : stories of sanitation, population, and information technologies /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Kadlecová, Hana. "Aplikace CAD/CAM technologie pro vytvoření loga společnosti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230849.

Full text

Abstract:

This thesis will address the design and production of the ATC Kolín comapny's logo. Thesis will be supported by the use of CAD/CAM programs. The choice of materials, components and tools will also be specified. Milling strategy will be designed with the PowerMill program. Two different methods of production will be compared. First one is the conventional machining on the FV 25 CNC vertical knee milling plant with the Heidenhain iTNC 530 controlling system. Where as the second one is the additive rapid prototypong technology with the usage of Fused Deposition Modeling method. The thesis is fini

APA, Harvard, Vancouver, ISO, and other styles

42

Wexler, Dara H. Biklen Sari Knopp. "Shifting pedagogies: intersections of computer-supported technologies, education, and power." Related Electronic Resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2003. http://wwwlib.umi.com/cr/syr/main.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Kaštil, Jan. "Hledání regulárních výrazů s využitím technologie FPGA." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2008. http://www.nusl.cz/ntk/nusl-235986.

Full text

Abstract:

The thesis explains several algorithms for pattern matching. Algorithms work in both software and hardware. A part of the thesis is dedicated to extensions of finite automatons. The second part explains hashing and introduces concept of perfect hashing and CRC. The thesis also includes a suggestion of possible structure of a pattern matching unit based on deterministic finite automatons in FPGA. Experiments for determining the structure and size of resulting automatons were done in this thesis.

APA, Harvard, Vancouver, ISO, and other styles

44

Demir, Abdullah. "New laser technologies analysis of quantum dot and lithographic laser diodes." Doctoral diss., University of Central Florida, 2010. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4618.

Full text

Abstract:

Lithographic VCSELs ability to control size lithographically in a strain-free, high efficiency device is a major milestone in VCSEL technology.; The first part of this dissertation presents a comprehensive study of quantum dot (QD) lasers threshold characteristics. The threshold temperature dependence of a QD laser diode is studied in different limits of p-doping, hole level spacing and inhomogeneous broadening. Theoretical analysis shows that the threshold current of a QD laser in the limit of uniform QDs is not temperature independent and actually more temperature sensitive than the quantum

APA, Harvard, Vancouver, ISO, and other styles

45

Kafka, Lukáš. "Využití CAD/CAM technologie pro výrobu formy čerpadlového kola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229137.

Full text

Abstract:

The master thesis deals with design for casting mould of an impeller wheel for investment casting lost wax and machining technology with utilization CAD software SolidWorks 2008 and CAM software PowerMill 9. Subsequent verification of machining on vertical machining center MCV 1210. At the end, techno-economic evaluation is done.

APA, Harvard, Vancouver, ISO, and other styles

46

Bardoň, Václav. "Aplikace CAD/CAM technologie pro návrh a výrobu prototypu těhlice předního kola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231696.

Full text

Abstract:

This master's thesis deals with design and manufacture of a prototype of pitman front right wheel of student's formula Dragon 4 of a team TU Brno Racing with use of advanced CAD/CAM technology. Opening part of the thesis deals with the theoretical analysis of milling technology. Furthermore, there is an analysis of aluminum alloys, which aims to integrate the material being machined CERTAL. In the practical part of the work the construction of pitman is done using CAD software SolidWorks 2012 and proposal of milling strategies is done using software PowerMILL CAM 10. The following is the reali

APA, Harvard, Vancouver, ISO, and other styles

47

Ho, Lee-kin Joe. "Incorporating GIS and CAD technologies in the modelling of three-dimensional urban landscape of Hong Kong." Click to view the E-thesis via HKUTO, 1999. http://sunzi.lib.hku.hk/hkuto/record/B42575229.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Seagrave, Susanne M. "The role of expensive technologies in the new medical marketplace /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 1998. http://wwwlib.umi.com/cr/ucsd/fullcit?p9906474.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Queen, Mary Teresa. "Technologies of representation fields of rhetorical action in transnational feminist encounters /." Related electronic resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2005. http://wwwlib.umi.com/cr/syr/main.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Jandák, Miroslav. "Napojení .NET / Java technologie na SAS BI." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-15551.

Full text

Abstract:

This thesis is focused on SAS Enterprise Intelligence Platform product and it's capabilities to integrate within a Business Intelligence solution. The aim of the thesis is to describe integration technolgies that the platform features, as well as to determine their application field and compare them, eventually add usage examples. The first part of the thesis explains the general concept and architecture of Business Intelligence, afterwards the reader gets familiar with the SAS Enterprise Intelligence Platform, it's stucture and components and it's Business Intelligence market position. The se

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!