Log in

Relevant bibliographies by topics / Cross-axis sensitivity

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers

Academic literature on the topic 'Cross-axis sensitivity'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cross-axis sensitivity.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cross-axis sensitivity"

1

He, Chang De, Wen Dong Zhang, Ji Jun Xiong, Chen Yang Xue, and Gui Xiong Shi. "A Monolithic Three-Axis Accelerometer with Low Cross-Axis Sensitivity." Advanced Materials Research 403-408 (November 2011): 691–96. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.691.

Full text

Abstract:

A 50,000g three-axis accelerometer using a single proof mass is presented. The sensitive structure is made of a single proof mass and eight cantilever beams. Twelve piezoresistors are placed on the cantilevers symmetrically, which can be used to detect 3-dimensional acceleration. The symmetric placement of the piezoresistors brings the reasonable sensitivity and simultaneously decreases the cross-axis sensitivity significantly. Simulation results show that the sensitivity in X-, Y- and Z-axis are 0.806uV/g, 0.806uV/g and 3.71uV/g respectively with 5V supply and the cross-axis sensitivities are all less than 2.4%, which ensures the high performance of the three-axis accelerometer.

APA, Harvard, Vancouver, ISO, and other styles

2

Guerinoni, Luca, Luca Giuseppe Falorni, and Gabriele Gattere. "Modelling Cross Axis Sensitivity in MEMS Coriolis Vibratory Gyroscopes." Proceedings 1, no. 4 (August 17, 2017): 281. http://dx.doi.org/10.3390/proceedings1040281.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lu, Qianbo, Chen Wang, Jian Bai, Kaiwei Wang, Shuqi Lou, Xufen Jiao, Dandan Han, Guoguang Yang, Dong Liu, and Yongying Yang. "Minimizing cross-axis sensitivity in grating-based optomechanical accelerometers." Optics Express 24, no. 8 (April 15, 2016): 9094. http://dx.doi.org/10.1364/oe.24.009094.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

OʼLEARY, DANIEL J., PHEI HUA YANG, and CHWEE HONG YEO. "Effect of Cross Cylinder Power on Cylinder Axis Sensitivity." Optometry and Vision Science 64, no. 5 (May 1987): 367–69. http://dx.doi.org/10.1097/00006324-198705000-00011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Din, Hussamud, Faisal Iqbal, and Byeungleul Lee. "Design Approach for Reducing Cross-Axis Sensitivity in a Single-Drive Multi-Axis MEMS Gyroscope." Micromachines 12, no. 8 (July 29, 2021): 902. http://dx.doi.org/10.3390/mi12080902.

Full text

Abstract:

In this paper, a new design technique is presented to estimate and reduce the cross-axis sensitivity (CAS) in a single-drive multi-axis microelectromechanical systems (MEMS) gyroscope. A simplified single-drive multi-axis MEMS gyroscope, based on a mode-split approach, was analyzed for cross-axis sensitivity using COMSOL Multiphysics. A design technique named the “ratio-matching method” of drive displacement amplitudes and sense frequency differences ratios was proposed to reduce the cross-axis sensitivity. Initially, the cross-axis sensitivities in the designed gyroscope for x and y-axis were calculated to be 0.482% and 0.120%, respectively, having an average CAS of 0.301%. Using the proposed ratio-matching method and design technique, the individual cross-axis sensitivities in the designed gyroscope for x and y-axis were reduced to 0.018% and 0.073%, respectively. While the average CAS was reduced to 0.045%, showing a reduction rate of 85.1%. Moreover, the proposed ratio-matching method for cross-axis sensitivity reduction was successfully validated through simulations by varying the coupling spring position and sense frequency difference variation analyses. Furthermore, the proposed methodology was verified experimentally using fabricated single-drive multi-axis gyroscope.

APA, Harvard, Vancouver, ISO, and other styles

6

Li, Xi Sheng, Rui Qing Kang, Yan Xia Liu, Zhi Hua Wang, and Xiong Ying Shu. "High Accuracy AMR Magnetometer and its Application to Vehicle Detection." Advanced Materials Research 443-444 (January 2012): 150–55. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.150.

Full text

Abstract:

The anisotropic magnetoresistive (AMR) sensors provide an excellent means of measuring the earth’s magnetic field. Low cost, high sensitivity, small size, noise immunity, and reliability are advantages of AMR sensor over other electrical alternatives. But the sensitivity of constant voltage biased AMR sensor changes greatly with the temperature of surrounding and cross-axis field. In this paper, constant current bias is used in order to reduce the sensitivity temperature coefficient of AMR sensor. At the same time, cross-axis field compensation is taken based on iteration. The results of experiment show that the sensitivity of HMC100x without cross-axis field compensation varies greatly with the variation of cross-axis field, the sensitivity of HMC100x with cross-axis field compensation is stable. It can be seen that proposed sensitivity compensation method is effective. Developed magnetometer is used for vehicle detection. Experimental results show that developed magnetometer is capable of detecting vehicle and its output variation curve shape is different for the ferrous cart moves over sensor along different direction.

APA, Harvard, Vancouver, ISO, and other styles

7

Mohammed, Zakriya, Waqas A. Gill, and Mahmoud Rasras. "Double-Comb-Finger Design to Eliminate Cross-Axis Sensitivity in a Dual-Axis Accelerometer." IEEE Sensors Letters 1, no. 5 (October 2017): 1–4. http://dx.doi.org/10.1109/lsens.2017.2756108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hsu, Yu-Wen, Jen-Yi Chen, Hsin-Tang Chien, Sheah Chen, Shih-Ting Lin, and Lu-Po Liao. "New capacitive low-gtriaxial accelerometer with low cross-axis sensitivity." Journal of Micromechanics and Microengineering 20, no. 5 (April 23, 2010): 055019. http://dx.doi.org/10.1088/0960-1317/20/5/055019.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sim, J. H., D. K. Kim, Y. H. Bae, K. H. Nam, and J. H. Lee. "Six-beam piezoresistive accelerometer with self-cancelling cross-axis sensitivity." Electronics Letters 34, no. 5 (1998): 497. http://dx.doi.org/10.1049/el:19980354.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ravi Sankar, A., S. Das, and S. K. Lahiri. "Cross-axis sensitivity reduction of a silicon MEMS piezoresistive accelerometer." Microsystem Technologies 15, no. 4 (November 20, 2008): 511–18. http://dx.doi.org/10.1007/s00542-008-0740-y.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Cross-axis sensitivity"

1

Hassan, Pour Dargah Mahmoud. "Effects of Shaker Impedance and Transducer Cross-Axis Sensitivity in Frequency Response Function Estimation." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1342729500.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ning, Yu-Tzong, and 甯煜宗. "Development of a vertical-plate-type Microaccelerometer with Suspended Piezoresistors Characterizing High Linearity and Low Cross-axis Sensitivity." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/87260480248047612894.

Full text

Abstract:

博士
國立臺灣大學
應用力學研究所
103
This research developed a microaccelerometer via Computer-Aid-Design(CAE) and Micro Electro Mechanical Systems(MEMS) with high performance in linearity and cross-axis sensitivity. Unlike the conventional sensing elements which are always embedded at the position of maximum displacement, the present study situated the sensors at the locations where the maximum displacements of the structure are generated in order to raise up the maximal output than the former. The core elements of accelerometer includes a vertical, double-ended flexural beam, a proof mass integrated at the middle section of the beam, and four suspended piezoresistors fixed at the mass block and across the trenches to the anchor pads. The mass block had maximum displacements of the dynamic structure which would activate the sensors to deliver maximal output. It was simulated by numerical method to analyze how much and where the maximal stress would be. The sensing chip was fabricated on a silicon-on-insulator(SOI) wafer through MEMS processes and installed by Dual-In-Package. The accelerometer was placed on a rate table that provided stable centrifugal acceleration up to approximately 3000 G for quasi-static testing. The output voltage of the accelerometer was digitized and radiofrequency transmitted for remote data acquisition. The natural frequency was about 232.4 kHz from mode analysis. After numerous experiments, the correlations for the individual runs showed that the accelerometer had a sensitivity of 3.0015 μV/Vexc/G with extraordinary performance. The best linearity of the sensing output was only 0.11% of full scale output (FS, or 59 dB), as deduced from the average standard deviation of all test runs. The average of the maximum reading deviations from the corresponding correlated curves was approximately 0.26% FS. Moreover, the cross-axis sensitivity for the two orthogonal directions nearly vanished in the test range. With the high rigidity of the microstructure, the accelerometer exhibited an ultra high performance factor of 25.8 x 10^6 MHz. The accelerometer possessed exceptional sensitivity, linearity, and repeatability, and extremely low cross-axis interference and noise.

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Cross-axis sensitivity"

1

Dargah, Mahmoud Hassan Pour, Randall J. Allemang, and Allyn W. Phillips. "Exciter Impedance and Cross-Axis Sensor Sensitivity Issues in FRF Estimation." In Topics in Modal Analysis I, Volume 5, 535–45. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-2425-3_50.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gottschalk, Michael G., and Katharina Domschke. "Genetics of stress-related disorders." In New Oxford Textbook of Psychiatry, edited by John R. Geddes, Nancy C. Andreasen, and Guy M. Goodwin, 840–49. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198713005.003.0080.

Full text

Abstract:

This chapter on genetics of stress-related disorders reviews the state of the art in molecular variations associated with post-traumatic stress disorder (PTSD), including cross-disorder phenotypes like anxiety sensitivity, state/trait anxiety, and harm avoidance. It summarizes the wealth of information collected in family and twin studies, genome-wide association studies (GWAS), and candidate gene, gene–environment, and epigenetic investigations. The molecular overlap between PTSD and anxiety disorders is highlighted. Emphasis is laid upon findings relating to serotonin, catecholamine, and the hypothalamic–pituitary–adrenal (HPA) axis signalling pathways, as well as the integration of physiological, imaging, and psychological readouts. Genetic variants linked to treatment response prediction, susceptibility, and resilience, as well as disease course, are discussed, and the complexity of gene–environment interactions in PTSD is addressed. Finally, a future outlook is offered into personalized therapy and innovative drug discovery, dimensional psychopathology, and polygenic risk evaluation in light of dynamic epigenetic markers and systems biology-informed nosology.

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cross-axis sensitivity"

1

Momen, Hadi Ghasemzadeh, Hadi Tavakoli, and Ebrahim Abbaspour Sani. "A 3-axis MEMS capacitive accelerometer free of cross axis sensitivity." In 2016 24th Iranian Conference on Electrical Engineering (ICEE). IEEE, 2016. http://dx.doi.org/10.1109/iraniancee.2016.7585757.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tavakoli, Hadi, and Ebrahim Abbaspour Sani. "A new method for eliminating cross axis sensitivity in two axis capacitive micromachined accelerometers." In 2013 21st Iranian Conference on Electrical Engineering (ICEE). IEEE, 2013. http://dx.doi.org/10.1109/iraniancee.2013.6599678.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Mohammed, Zakriya, Alabi Bojesomo, Waqas A. Gill, Ibrahim M. Elfadel Abe, and Mahmoud Rasras. "A crab leg suspension based dual axis MEMS accelerometer with low cross axis sensitivity." In 2016 IEEE 59th International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE, 2016. http://dx.doi.org/10.1109/mwscas.2016.7870040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Luo, Yi. "Cross-axis sensitivity enhancement for a quad beam piezoresistive accelerometer." In 2013 26th IEEE Canadian Conference on Electrical and Computer Engineering (CCECE). IEEE, 2013. http://dx.doi.org/10.1109/ccece.2013.6567805.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Alfaifi, Ahmad, Frederic Nabki, and Mourad N. El-Gamal. "A dual-axis bulk micromachined accelerometer with low cross-sensitivity." In 2012 19th IEEE International Conference on Electronics, Circuits and Systems - (ICECS 2012). IEEE, 2012. http://dx.doi.org/10.1109/icecs.2012.6463650.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jamshidi, Babak, Robert G. Azevedo, Anand V. Jog, and Albert P. Pisano. "Enhanced Cross-Axis Rejection Capacitive Strain Gauge." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-43168.

Full text

Abstract:

A novel bending plate capacitive strain gauge is designed, fabricated, and tested to measure strain in the range of 1 to 1000 με. This silicon-based strain sensor uses a unique structural design to increase the on-axis gain through the use of a bending beam structure while attenuating signals due to cross-axis strain. A differential capacitive measurement is used to improve the output, reduce the parasitic capacitance, and eliminate the capacitance measurement error due to temperature. The device is fabricated using silicon-on-insulator (SOI) technology. Experimental results exhibit an on-axis sensitivity of 50 aF/με and attenuation of the cross-axis sensitivity to shear strain to less than 10 percent of the applied shear strain. A detailed mechanical analysis of the suspension and deflection-amplifying bent-beam capacitor will be presented. Furthermore, the capacitive plate analytical model is compared to finite element simulations and verified with experimental results. In addition, a noise assessment of the device shows the electronics noise dominates the Brownian noise.

APA, Harvard, Vancouver, ISO, and other styles

7

Caruso, Chris. "Experimental Technique for Measuring Cross-Axis Sensitivity of Automotive Crash Sensors." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/910279.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Zhang, Mengqi, Jinquan Liu, Shihao Tang, and Liangcheng Tu. "Cross-axis Sensitivity Calibration of MEMS Gravimeters on a Dividing Head." In 2020 IEEE International Symposium on Inertial Sensors and Systems (INERTIAL). IEEE, 2020. http://dx.doi.org/10.1109/inertial48129.2020.9090076.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ray, Prasenjit, V. Ramgopal Rao, and Prakash R. Apte. "A 8-resistor SU-8 accelerometer with reduced cross axis sensitivity." In APCCAS 2010-2010 IEEE Asia Pacific Conference on Circuits and Systems. IEEE, 2010. http://dx.doi.org/10.1109/apccas.2010.5775073.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Jatiningrum, Dyah, Marinus van Paassen, Coen C. de Visser, Q. Ping Chu, and Max Mulder. "Investigating Cross-Axis Sensitivity and Misalignment in an Angular Accelerometer Measurement Unit." In AIAA Guidance, Navigation, and Control Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2017. http://dx.doi.org/10.2514/6.2017-1905.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!