Relevant bibliographies by topics / CS gas industry

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'CS gas industry'

Author: Grafiati
Published: 11 December 2022
Last updated: 19 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'CS gas industry.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "CS gas industry"

1

Singh, Jagmeet, Jaspal Singh, and Manpreet Kaur. "Copper Slag Blended Cement: An Environmental Sustainable Approach for Cement Industry in India." Current World Environment 11, no. 1 (2016): 186–96. http://dx.doi.org/10.12944/cwe.11.1.23.

Full text
Abstract:
Indian cement industry is facing environmental issue of emission of carbon dioxide (CO2), a greenhouse gas. Blended cements including supplementary cementitious materials are substitute of Portland cement to reduce CO2 emission. The present paper investigates theappropriateness of copper slag (CS) as supplementary cementitious material. Strength properties and hydration of mixes were determined at different replacement levels of CS with cement. Compressive, flexural and tensile strength of each mix was found out at different curing periods. The hydration of cement was investigated through X-ra
APA, Harvard, Vancouver, ISO, and other styles
2

Natalia, Lidya, and Ibnu Harris. "PENGARUH KNOWLEDGE MANAGEMENT TERHADAP TOTAL QUALITY MANAGEMENT DAN CORPORATE SUSTAINABILITY PADA PERUSAHAAN GAS INDUSTRI." KOMPLEKSITAS: JURNAL ILMIAH MANAJEMEN, ORGANISASI DAN BISNIS 11, no. 1 (2022): 14–26. http://dx.doi.org/10.56486/kompleksitas.vol11no1.172.

Full text
Abstract:
This study aims to determine the effect of TQM as independent variabel on corporate sustainability as dependent variabel with knowledge management as an intervening variabel. The number of respondents involved in this study were 60 respondents, all of whom were employees of gas industry companies in Batam City who had ISO 9001 certification in company quality standards. This study uses a quantitative approach. The data in this study were obtained from the results of filling out a questionnaire. The research data were analyzed using the Partial Least Square (PLS) technique which was carried out
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Yang, Wenshuang Zhang, Na Luo, Wei Wang, and Jiaqiang Xu. "Defective ZnO Nanoflowers Decorated by Ultra-Fine Pd Clusters for Low-Concentration CH4 Sensing: Controllable Preparation and Sensing Mechanism Analysis." Coatings 12, no. 5 (2022): 677. http://dx.doi.org/10.3390/coatings12050677.

Full text
Abstract:
To detect low concentration of CH4 is indeed meaningful in industrial manufacturing, such as the petrochemical industry and natural gas catalysis, but it is not easy to detect low concentration of CH4 due to its high symmetrical and stable structure. In this work, defect-rich ZnO1−x nanoflowers (NFs) were synthesized by a two-step route so as to obtain defect-enhanced gas-sensing performance, namely hydrothermal synthesis followed by H2 treatment. In order to achieve low-concentration detection of CH4, the ultra-thin Pd clusters’ (Cs, diameter about 1–2 nm) sensitizer was synthesized and decor
APA, Harvard, Vancouver, ISO, and other styles
4

Huang, Yueyu, Haifeng Li, Jianwu Liu, Zizhao Wu, Qun Wang, and Chidambaram Seshadri Ramachandran. "Research Progress on Post-Treatment Technologies of Cold Spray Coatings." Coatings 15, no. 3 (2025): 265. https://doi.org/10.3390/coatings15030265.

Full text
Abstract:
Cold spraying (CS), also known as cold gas dynamic spraying or supersonic cold spraying, is a process in which particles collide with the substrate at a speed greater than the critical value and deposit layer by layer to form a coating. As an emerging coating preparation technology that has been developed rapidly in recent years, CS is characterized by a low deposition temperature, a minimal thermal effect on substrate, and a high deposition efficiency. It has received extensive attention from industry. However, the inherent high strength and low plasticity of CS coatings and the numerous defe
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Yuan, and Shaolin Hu. "State monitoring and fault prediction of centrifugal compressors based on long short–term memory and principal component analysis (LSTM-PCA)." PeerJ Computer Science 10 (October 21, 2024): e2433. http://dx.doi.org/10.7717/peerj-cs.2433.

Full text
Abstract:
Centrifugal compressors are widely used in the petroleum and natural gas industry for gas compression, reinjection, and transportation. Early fault identification and fault evolution prediction for centrifugal compressors can improve equipment safety and reduce maintenance and operating costs. This article proposes a dynamic process monitoring method for centrifugal compressors based on long short-term memory (LSTM) and principal component analysis (PCA). This method constructs a sliding window for monitoring at each sampling point, which contains 100 data from the past and current time points
APA, Harvard, Vancouver, ISO, and other styles
6

Shen, Tianhao, Fengxia Zhang, Shiliang Yang, Hua Wang, and Jianhang Hu. "Investigation of Pyrolysis Kinetic Triplet, Thermodynamics, Product Characteristics and Reaction Mechanism of Waste Cooking Oil Biodiesel under the Influence of Copper Slag." Energies 16, no. 5 (2023): 2137. http://dx.doi.org/10.3390/en16052137.

Full text
Abstract:
WCO-Biodiesel can be used as a fuel instead of fossil energy for the copper smelting industry will not only save resources but also protect the environment. The pyrolysis of WCO-Biodiesel in the melting pool is influenced to some extent by the copper slag (CS) generated during the copper smelting process. In this study, the effects of CS on the kinetic triplet, thermodynamics, product characteristics and reaction mechanism of WCO-Biodiesel are comprehensively investigated via a thermogravimetric analyzer and pyrolysis experimental system. Firstly, the apparent activation energy (Eα) is calcula
APA, Harvard, Vancouver, ISO, and other styles
7

Costa Júnior, Lindembergue Pereira, Tatiara Gomes De Almeida, Gabriella Amorim Muniz Falcão, Laura Hecker De Carvalho, Gloria Maria Vinhas, and Yêda Medeiros Bastos De Almeida. "Effect of organoclay and corn straw on the properties of poly (butylene adipate-co-terephthalate) (PBAT) hybrid composites." Revista de Gestão e Secretariado (Management and Administrative Professional Review) 14, no. 7 (2023): 11309–32. http://dx.doi.org/10.7769/gesec.v14i7.2294.

Full text
Abstract:
The packaging industry requires permeable materials capable of offering freshness of the packaging content. The use of fillers can enhance these permeable properties to the polymeric material. This work investigates the effect of incorporating different fillers (organophilic clay and corn straw) on the rheological, mechanical, permeability, water absorption and biodegradability characteristics of poly (butylene adipate co-terephthalate) (PBAT) processed in an internal laboratory mixer. Extruded films and specimens injection molded were produced. The results of torque rheometry suggest polymer
APA, Harvard, Vancouver, ISO, and other styles
8

Lashari, Muhammad Hanif, Sarang Karim, Musaed Alhussein, Ayaz Ahmed Hoshu, Khursheed Aurangzeb, and Muhammad Shahid Anwar. "Internet of Things-based sustainable environment management for large indoor facilities." PeerJ Computer Science 9 (October 9, 2023): e1623. http://dx.doi.org/10.7717/peerj-cs.1623.

Full text
Abstract:
Due to global warming and climate change, the poultry industry is heavily impacted, especially the broiler industry, due to the sensitive immune system of broiler chickens. However, the continuous monitoring and controlling of the farm’s environmental parameters can help to curtail the negative impacts of the environment on chickens’ health, leading to increased meat production. This article presents smart solutions to such issues, which are practically implemented, and have low production and operational costs. In this article, an Internet of Things (IoT) based environmental parameters monito
APA, Harvard, Vancouver, ISO, and other styles
9

Diraki, Ahmad, and Sasha Omanovic. "Control of Corrosion of Carbon Steel in Sea Water by Polyaniline/Epoxy-(graphene)-Based Double-Layered Smart Coatings." ECS Meeting Abstracts MA2024-02, no. 17 (2024): 1681. https://doi.org/10.1149/ma2024-02171681mtgabs.

Full text
Abstract:
Carbon steel (CS) is the preferred construction material in most industries due to its cost-effectiveness and unique mechanical properties. However, CS is susceptible to corrosion, and it thus requires the application of proper corrosion control measures to lengthen its service life. With regards to the oil and gas industry, the pipelines used to transport the oil and gas from the offshore production well are exposed to two main forms of the corrosive environment: the saltwater that surrounds the pipeline's outer wall, and the acidic corrosive environment that attacks the inner pipeline wall,
APA, Harvard, Vancouver, ISO, and other styles
10

Ion, Alberto, Pierre Sallot, Victor Badea, Patrice Duport, Camelia Popescu, and Alain Denoirjean. "The Dual Character of MAX Phase Nano-Layered Structure Highlighted by Supersonic Particles Deposition." Coatings 11, no. 9 (2021): 1038. http://dx.doi.org/10.3390/coatings11091038.

Full text
Abstract:
MAX phase compounds offer an attractive mixture of ceramic–metallic properties due to their covalent ionic–metallic nature. Since their discovery, a great interest was attributed to their synthesis and potential applications, but the processing of pure compounds as coatings for industrial large-scale application is still considered a challenge. To date, a limited number of papers have evaluated the build-up of MAX phase coating by cold spray (CS), a novel cost-effective and productive spray technology used in both areas of research and industry. Employing CS, the hot gas-propelled material par
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "CS gas industry"

1

Bos, Gretchen. "Assessment of microorganisms found in coal seam water holding ponds and in brine." Thesis, Queensland University of Technology, 2021. https://eprints.qut.edu.au/210585/1/Gretchen_Bos_Thesis.pdf.

Full text
Abstract:
The research investigated predominant culturable microorganisms within coal seam water and coal seam concentrated brine, which were then assessed on specific threshold conditions (temporal and salinity). The main outcomes found were a consistent optimal temperature across all microorganisms and varying impacts of salinity on their growth. This research will aid the coal seam gas industry in their investigation of microbial impact in coal seam water treatment systems.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "CS gas industry"

1

Sharma, Ankush, Ankush Chauhan, Ritesh Verma, Hui-Min David Wang, Preeti Thakur, and Atul Thakur. "“Perovskite”: A Key Material for the Biomedical Industry." In Biomedical Applications of Perovskites: The Era of Bio-Piezoelectric Systems. BENTHAM SCIENCE PUBLISHERS, 2024. http://dx.doi.org/10.2174/9789815256383124010007.

Full text
Abstract:
Perovskite materials are well-known for their remarkable thermal, optoelectronic, and magnetic capabilities. This chapter examines current advances in the study of biological applications involving perovskites. This chapter looks at how organic-inorganic hybrid perovskites can be used for X-ray detection and imaging. This can be achieved by switching to Cs+ -cations or MA+/Cs+ alloyed motifs, which not only widen the band gaps but also enhance the structural stability of perovskite materials. The future research direction should focus on fabricating large-area and thick 2D perovskite absorbers on thin-film transistor arrays through compatible printing (polycrystalline) and self-assembled (monocrystalline) methods to achieve X-ray detectors and imagers with high sensitivities and responsivities. The detailed material phases of La0.7Sr0.3Mn0.98Ti0.02O3 perovskite nanoparticles have not been unambiguously elucidated due to inaccurate relative compositions of metal cations. Therefore, insightful structural analysis of the material is needed for confirmation of the magnetically thermally active phase. In the case of perovskite La2NiMnO6 nanoparticles, their ability to desorb BSA protein molecules has not been studied, which is required to fully comprehend the binding/detachment dynamics of enzyme reactions. Finally, the future research direction of CaTiO3 -based composites is to further understand their structure-property relationships under more complicated chemical environments with variations in temperature, pH, and pressure, given their promising biocompatibility and cytotoxicity.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "CS gas industry"

1

Al Arada, Musaed, and Mefleh Al Otaibi. "Evaluation of High Temperature Hydrogen Attack Effect on Carbon Steel - 0.5 Mo Heat Exchanger." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4212.

Full text
Abstract:
Abstract Existing C-0.5Mo steel equipment in hydrogen service is still a concern in industries due to its high susceptibility to hydrogen attack at elevated temperature. High Temperature Hydrogen Attack (HTHA) has been one of the major problems in petroleum and petrochemical industry because of its metal degradation phenomena. HTHA occurs in carbon and low carbon steels exposed to high partial pressure of hydrogen at elevated temperatures. Since the original Nelson Curve was published in 1949 to define the operating limits for steels used in hydrogen service to avoid HTHA, a number of research
APA, Harvard, Vancouver, ISO, and other styles
2

Al Yahyaai, Ahmed, Amjad Al Kharusi, Bushra Al Hudar, Hilal Al Shuhumi, Mohammed Al Maqbali, and Ramachandrappa Ramanahalli. "Compatibility Study of HDPE Internal Lining in Carbon Steels for Polymer Injection and Mixing Applications." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20607.

Full text
Abstract:
Abstract Oil and gas production consider the nature of the reservoir and the complexity of the forming layers as a governing factor. One of the major challenges that are faced in the oil and gas upstream industry is the complexity of the reservoir in which the production requires enhanced recovery process. Polymer injection is one of the methods that is used widely to enhance the production and increase it accordingly. However, after the polymer preparation and mixing process, a system of flowlines and pipelines is utilized to carry over the final polymer product to the injection wells. This r
APA, Harvard, Vancouver, ISO, and other styles
3

Lye, Nik, Blake Herbert, Rocky Friedrich, Simon Eves, and Allen Chiu. "Reducing Embodied Carbon by Using Fibre Reinforced Polymers (FRP) Rather than Steel." In MECC 2023. AMPP, 2023. https://doi.org/10.5006/mecc2023-20045.

Full text
Abstract:
Abstract Embodied carbon is an important consideration when designing and specifying projects in the oil and gas industry. Fibre Reinforced Polymer (FRP) structural products and Glass Reinforced Epoxy (GRE) pipes are known for their light weight and corrosion resistant properties, but these properties also have the effect of reducing the embodied carbon of the products over their life span. By taking the examples of traditionally steel products and their FRP equivalents this paper aims to quantify the potential savings. The comparison for structural products focuses on phenolic FRP offshore ha
APA, Harvard, Vancouver, ISO, and other styles
4

Ezekoye, L. Ike, and William M. Turkowski. "Snapshot Review of the Regulation of Gas Voids in Nuclear Steam Supply Systems in the United States." In 18th International Conference on Nuclear Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/icone18-30240.

Full text
Abstract:
The recent NRC Generic Letter (GL) 2008-01 titled “Managing Gas Intrusion in Emergency Core Cooling, Decay Heat Removal, and Containment Spray Systems” to nuclear power plant licensees in the United States requires demonstration of suitable design, operational testing and control measures in order to maintain licensing commitments [1]. The generic letter outlines a number of actions that are detailed in nature; such as establishing pump void tolerance limits, limits on pump suction void fractions, etc. Each addressee was requested to evaluate their Emergency Core Cooling System (ECCS), Decay H
APA, Harvard, Vancouver, ISO, and other styles
5

Nasri Huang, Farah Julieana, Muhammad Fikri Hashim, and Siti Aisyah Omar. "Design, Operation and Maintenance of Subsea High Integrity Pressure Protection System and Subsea Automated Pig Launcher for Shallow Water Gas Condensate Field Development in Malaysia." In SPE Asia Pacific Oil & Gas Conference and Exhibition. SPE, 2022. http://dx.doi.org/10.2118/210768-ms.

Full text
Abstract:
Abstract Objectives/Scope This paper provides an overview of design, operation, and maintenance of Subsea High Integrity Pressure Protection System (HIPPS) and Subsea Automated Pig Launcher (SAPL) in a shallow water gas condensate field development offshore Sarawak, Malaysia. It will outline the key technical drivers for the subsea field architecture development and technology qualification programme that was undertaken to manage the risk and uncertainties with deployment and operation of new subsea technology. Methods, Procedures, Process The shallow water field hereby denotes as "Field K" is
APA, Harvard, Vancouver, ISO, and other styles
6

Ezekoye, L. Ike, Ryan D. Griffin, William M. Turkowski, and Gregory R. Williams. "An Integrated Approach for Monitoring Gas Accumulation in Safety Related Systems." In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77957.

Full text
Abstract:
Gas intrusion into safety related systems, such as the Emergency Core Cooling System (ECCS), Decay Heat Removal (DHR) and Containment Spray (CS) system in nuclear power plants is undesirable and has led to pump binding and damaging water hammer events. Furthermore, total or momentary loss of hydraulic performance in safety related pumps has occurred, which has led to pump damage rendering the pumps unable to perform their safety functions or reduce the pump discharge pressure and flow capacity to the point that the system cannot perform its design function. Extreme cases of water hammer can re
APA, Harvard, Vancouver, ISO, and other styles
7

Ahmad Zuhdi, M. Faizan, F. Hadana Rahman, Hamid Shahjavan, et al. "Feasibility Study of Offshore Hybrid Technology for High CO2 Gas Field Monetization." In International Petroleum Technology Conference. IPTC, 2021. http://dx.doi.org/10.2523/iptc-21220-ms.

Full text
Abstract:
Abstract The CO2 capture technology is well understood in the oil and gas industry. However, to unlock the Hydrocarbon from an ultra-high CO2 offshore field (more than 70% mol), special attention is needed to capture CO2 for a field development to be economically attractive. Therefore, the current technology inventory needs to be studied to achieve project goals and at the same time achieving Carbon Capture and Storage (CCS) requirements. A hybrid of multiple carbon capture technology will help to improve the hydrocarbon (HC) loss, reduce both operational and capital cost and minimize overall
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Bingchang, Hongwei An, Scott Draper, Hongyi Jiang, Liang Cheng, and Xu Zhao. "Three-Dimensional Flow Around a Span Shoulder of a Pipeline/Cable: Insight From Experiments Combined With Numerical Modelling." In ASME 2024 43rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/omae2024-125552.

Full text
Abstract:
Abstract Current-induced three-dimensional (3-D) scour below offshore pipelines and cables (P/Cs) is a concern in both the offshore oil and gas industry and the offshore renewable energy industry. This 3-D scour phenomenon can lead to elongation of free spans and control the time scale of self-burial. Thus, much experimental research has focused on span elongation due to 3-D scour. However, due to limitations in measurement techniques, especially in accurately assessing the flow structure in the gap, the scour propagation mechanism is not well understood. In this study, scour propagation below
APA, Harvard, Vancouver, ISO, and other styles
9

Pasarai, Usman, Panca Wahyudi S., Arie Haans, IGN Widiantara, and Budi Saroyo. "Additive Scale Removal Based on Noncorrosive Organic Acid for Handling Silica and Carbonate Scale in Oil and Gas and Geothermal Wells." In SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/205739-ms.

Full text
Abstract:
Abstract The silica and carbonate scale that forms along the production pipeline is a significant problem in the oil and gas and geothermal industry because it disrupts production operations. Silica and carbonate scales on the inside of the pipe cause blockage of flow and an increase in pressure. Failure of downhole settlement equipment will reduce the production capacity of the well, and the maintenance burden will increase. The main objective of this research is to test the reactivity of an environmentally friendly non-corrosive organic acid system based on vegetable fatty acids and carbohyd
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Bingchang, Hongwei An, Scott Draper, Hongyi Jiang, and Liang Cheng. "Numerical Simulations of Three-Dimensional Scour Below Subsea Pipelines/Cables Under Steady Current Conditions." In ASME 2023 42nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/omae2023-104579.

Full text
Abstract:
Abstract Scoured induced free span is one of the major engineering hazards for submarine pipelines/cables (P/Cs) in offshore oil and gas industry and offshore renewable energy industry. Due to the lack of knowledge about scour propagation along spanwise direction, conservative and costly stabilization methods are usually adopted for span mitigation. To address the concern related to free spans, great efforts have been made to establish the prediction models for scour propagation rate, most of the research is based on laboratory experiments to propose semi-theoretical equations. However, due to
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'CS gas industry' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography