Relevant bibliographies by topics / ČSN EN 1591

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'ČSN EN 1591'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'ČSN EN 1591.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "ČSN EN 1591"

1

Votava, Jiří, Vojtěch Kumbár, Adam Polcar, and Martin Fajman. "Change of Mechanical Properties of Zinc Coatings After Heat Treatment." Acta Technologica Agriculturae 23, no. 1 (2020): 7–11. http://dx.doi.org/10.2478/ata-2020-0002.

Full text
Abstract:
AbstractHot-dip galvanized coatings represent a protection based on passivation of the single zinc layer. It is one of the most commonly used surface treatments of steel. However, pure zinc forms merely an insignificant upper layer. Coating crosscut is formed by intermetallic phases that can cause decrease in the level of anticorrosion protection. This results from an iron diffusion from the base material. Goal of this paper is to analyse the changes in the mechanical properties of these phases in relation to zinc coating heat treatment. For the experiment, annealing temperatures of 200 °C and
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "ČSN EN 1591"

1

Šmarda, Radek. "Konstrukční návrh vysokotlakého separátoru se zaměřením na přírubový spoj." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416453.

Full text
Abstract:
The first part of the diploma thesis deals with research in the field of design of process apparatuses. The research continues describing the function, division and main parts of separators. The research part ends with a more detail overview of flange connections. The second part deals with the design and control calculations of the separator using ČSN EN 13445-3 with tightness-strength calculation of the main flange join using ČSN EN 1591-1. At the end of the second part, partial calculations are performed using finite element method in the ANSYS Workbench R2 program, which aim to verify the
APA, Harvard, Vancouver, ISO, and other styles
2

Polišenská, Anna. "Výpočtové posouzení přírubových spojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401583.

Full text
Abstract:
This Master’s thesis deals with flange joints. A suitably designed flange joint (FJ) construction and installation is necessary to ensure the reliability of piping systems and machinery where these joints are used. The thesis describes the procedures of their design and assessment in terms of tightness, strength and durability. It focuses on the stiffness calculation of all components of FJ – primarily the stiffness of flanges, bolts and seals. The main part of the work was to create a computational program by using the Python language to determine the appropriate preload force in the bolts. T
APA, Harvard, Vancouver, ISO, and other styles
3

Blažková, Eva. "Modifikace utěsnění víka primárního kolektoru PG VVER 440." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230374.

Full text
Abstract:
The aim of this thesis is to address issues concerning the sealing of the lid for the primary collector within the steam generator (SG) of the nuclear power plant VVER 440. These steam generators are sealed in the original design by nickel rings. Modifying the existing method of sealing by a new type of sealing material, primarily from expanded graphite, can significantly reduce the pressure in the sealing surface and also stress in bolts and flanged joints. The new solution of sealing between the joint of collector and the lid should extend the life of joints and thus the nuclear and technica
APA, Harvard, Vancouver, ISO, and other styles
4

Švaříček, Tomáš. "Modifikace utěsnění průlezu kompenzátoru objemu VVER 1000." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229747.

Full text
Abstract:
The main purpose of this thesis is the modification of the original flange gasket of the VVER1000 pressurizer manhole. Then the construction and function of the pressurizer itself is described, together with detailed calculations of the original and new modified gasket to meet the ČSN EN 1591 standard together with a description of the legislation that has to be followed in the calculations. The comparisons of both gasket types together with main conclusions are placed in the last section of this thesis.
APA, Harvard, Vancouver, ISO, and other styles
5

Šnajdárek, Ladislav. "Modifikace utěsnění víka iontového filtru TC SVO1 v JE s VVER 440." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229781.

Full text
Abstract:
This diploma thesis is engaged in replacement of gasket ion filter used in the ion filter of continuous cleaning TC SV01 of rector coolant in nuclear power plants with VVER 440 reactor. Original nickel gasket is replaced by kammprofile gasket with expanded graphite. Calculation results are compared with each other and are described as suggestions for further calculation. The first part included a detailed description of the primary coolant water chemistry, along with a description of the function and structure of ion filter.
APA, Harvard, Vancouver, ISO, and other styles
6

Pransperger, Jan. "Modifikace utěsnění víka primárního kolektoru PG VVER 1000." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230372.

Full text
Abstract:
This thesis deals with the replacement of the lid gasket of the primary collector of the steam generator VVER 1000. Original sealing by nickel rings is replaced by kammprofile gasket with expanded graphite layers. The thesis compare the properties of both types of gaskets and the new and the original configuration of flange joint which have been calculated according to EN 1591. The results are compared and conclusions arising therefrom are presented. The work includes results of FEM analysis of the new configuration of the flange joint. There is also a description of the main components of the
APA, Harvard, Vancouver, ISO, and other styles
7

Svoboda, Pavel. "Návrh těsnění HDR HCČ 317 v JE Paks." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228604.

Full text
Abstract:
This diploma work is engaged in replacement of gasket main dividing plane of reactor coolant pumps in nuclear power plant Paks. Of the newly suggested gasket is kammprofile gasket with expanded graphite layer. This work contain suggestion and calculation of new sealing a knot and calculation existing sealing the knot. Results are confrontacion and sequentially is discussed influence on main dividing plane HCČ 317 by use the new and the existing gasket. In this work is contained description brief of legislation. This legislation must keep by design components dedicated for nuclear equipment. Ne
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography