Academic literature on the topic 'Current voltage and power voltage characteristics'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Current voltage and power voltage characteristics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Current voltage and power voltage characteristics"

1

Qasim, Ahmed, Fadhil Tahir, and Ahmed Alsammak. "Voltage Sag, Voltage Swell and Harmonics Reduction Using Unified Power Quality Conditioner (UPQC) Under Nonlinear Loads." Iraqi Journal for Electrical and Electronic Engineering 17, no. 2 (2021): 140–50. http://dx.doi.org/10.37917/ijeee.17.2.16.

Full text
Abstract:
In light of the widespread usage of power electronics devices, power quality (PQ) has become an increasingly essential factor. Due to nonlinear characteristics, the power electronic devices produce harmonics and consume lag current from the utility. The UPQC is a device that compensates for harmonics and reactive power while also reducing problems related to voltage and current. In this work, a three-phase, three-wire UPQC is suggested to reduce voltage-sag, voltage-swell, voltage and current harmonics. The UPQC is composed of shunt and series Active Power Filters (APFs) that are controlled ut
APA, Harvard, Vancouver, ISO, and other styles
2

Islam, Mirwazul, and Grigory Simin. "Compact Model for Current Collapse in GaN-HEMT Power Switches." International Journal of High Speed Electronics and Systems 25, no. 01n02 (2016): 1640001. http://dx.doi.org/10.1142/s0129156416400012.

Full text
Abstract:
We present a simple yet accurate model describing current-voltage characteristics of GaN-HEMT power switches in presence of carrier trapping often referred to as current collapse. The model accounts for time-dependent changes in the source-gate and gate-drain resistances after application of high drain voltage. The model also has a regime describing ‘fast’ current voltage characteristics when the applied voltage swing occurs within a period of time much shorter than the characteristic trapping – detrapping times. The model is written in Verilog-A and can be implemented in SPICE-type circuit si
APA, Harvard, Vancouver, ISO, and other styles
3

Odzaev, Vladimir B., Aliaksandr N. Pyatlitski, Uladislau S. Prasalovich, et al. "Electrophysical characteristics of power MOSFETs additionally implanted with nitrogen ions." Journal of the Belarusian State University. Physics, no. 3 (September 29, 2022): 81–92. http://dx.doi.org/10.33581/2520-2243-2022-3-81-92.

Full text
Abstract:
The electrical characteristics of power MOSFETs additionally implanted with nitrogen ions have been studied. Ion implantation of nitrogen was carried out through a protective oxide of 23 nm thickness with energies of 20 and 40 keV and doses of 1 ⋅ 1013‒5 ⋅ 1014 cm–2. Rapid thermal annealing was carried out at temperature of 900 or 1000 °C for 15 s. It has been established that nitridisation of the gate dielectric makes it possible to reduce the noise of the gate leakage currents and their dispersion. In the direct order of heat treatment (first rapid thermal annealing, and then the removal of
APA, Harvard, Vancouver, ISO, and other styles
4

Shim, Yo-Shep. "Electrical Characteristics of Underwater Human Body Model in Charging Power Facility." Korean Society of Technical Education and Training 25, no. 3 (2020): 25–31. http://dx.doi.org/10.29279/kostet.2020.25.3.25.

Full text
Abstract:
In this study, the electrical simulation of electric shock accidents at a voltage of 220 V was investigated using Andrew s body model in water. The constructed circuit consisted of Andrew s body model. The voltages measured on a hand, breast, waist, were compared with the electric currents measured on the hand, breast, and waist considering the safety limit of an electric current passing through the body. From the results, it can be understood that the magnitude and wave of electric current passing through the body affect the heart s control of a signal, which directly affects the ventricle of
APA, Harvard, Vancouver, ISO, and other styles
5

Matsuda, Takuma, Takashi Yokoseki, Satoshi Mitomo, et al. "Change in Characteristics of SiC MOSFETs by Gamma-Ray Irradiation at High Temperature." Materials Science Forum 858 (May 2016): 860–63. http://dx.doi.org/10.4028/www.scientific.net/msf.858.860.

Full text
Abstract:
Radiation response of 4H-SiC vertical power Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs) was investigated at 150°C up to 10.4 MGy. Until irradiation at 1.2 MGy, the drain current – gate voltage curves of the SiC MOSFETs shifted to the negative voltage side, and the leakage of drain current at gate voltages below threshold voltage increased with increasing absorbed dose. However, no significant change in the electrical characteristics of SiC MOSFETs was observed at doses above 1.2 MGy. For blocking characteristics, there were no degradations of the SiC MOSFETs irradiated at 150°
APA, Harvard, Vancouver, ISO, and other styles
6

Cho, Min Su, Hye Jin Mun, Sang Ho Lee, et al. "Design and Analysis of DC/DC Boost Converter Using Vertical GaN Power Device." Journal of Nanoscience and Nanotechnology 21, no. 8 (2021): 4320–24. http://dx.doi.org/10.1166/jnn.2021.19395.

Full text
Abstract:
In this study, a high-performance vertical gallium nitride (GaN) power transistor is designed by using two-dimensional technology computer-aided design simulator. The vertical GaN transistor is used to analyze the DC/DC boost converter. The systems requiring high voltages of 1000 V or more, such as electric vehicles, need wide devices to achieve a high breakdown voltage when using conventional power devices. However, vertical GaN transistors can be fabricated with small device area and high breakdown voltage. The proposed device has an off-current of 4.72×10−10 A/cm2, an on-current of 17,528 A
APA, Harvard, Vancouver, ISO, and other styles
7

Bolaño Martínez, Adrián, Isaac Jimenez Navarro, Vladimir Sousa Santos, Enrique Ciro Quispe, and Pablo Daniel Donolo. "MATLAB/Simulink modeling of electric motors operating with harmonics and unbalance." International Journal of Electrical and Computer Engineering (IJECE) 12, no. 5 (2022): 4640. http://dx.doi.org/10.11591/ijece.v12i5.pp4640-4648.

Full text
Abstract:
This paper aims to present a simulation model for the analysis of the operational characteristics of electric motors (EMs). The model was developed on the Simulink platform of the MATLAB program and allows analysis in supply conditions with harmonics and voltage unbalance. The contribution of the model is that it considers the mechanical losses and provides for the study of the effect of each component of the electrical sequence of the harmonics and the voltage unbalance on the electromechanical characteristics of the EM. The model developed was tested in a 37.3 kW EM, operating under four pow
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Jinlei, Sheng Wang, Carlos E. Ugalde-Loo, et al. "Demonstration of Converter Control Interactions in MMC-HVDC Systems." Electronics 11, no. 2 (2022): 175. http://dx.doi.org/10.3390/electronics11020175.

Full text
Abstract:
Although the control of modular multi-level converters (MMCs) in high-voltage direct-current (HVDC) networks has become a mature subject these days, the potential for adverse interactions between different converter controls remains an under-researched challenge attracting the attention from both academia and industry. Even for point-to-point HVDC links (i.e., simple HVDC systems), converter control interactions may result in the shifting of system operating voltages, increased power losses, and unintended power imbalances at converter stations. To bridge this research gap, the risk of multipl
APA, Harvard, Vancouver, ISO, and other styles
9

Bolshanyn, G. A. "EQUIVALENTS OF THE PASSIVE EIGHT-EARTH POLAR WITH THREE INPUT AND FIVE OUTPUT CONCLUSIONS." Proceedings of the higher educational institutions. ENERGY SECTOR PROBLEMS 20, no. 9-10 (2019): 109–19. http://dx.doi.org/10.30724/1998-9903-2018-20-9-10-109-119.

Full text
Abstract:
Eight-poles of various designs, including an eight-terminal network with three input and five output terminals, are needed to replace some power objects. Especially when only the input and output characteristics of electrical energy are of interest. The paper presents the eightterminal network equations with three input and five output terminals, establishing a connection between these characteristics. Equations of the A-form establish a connection between the input and output voltages and currents; the B-form equations establish a connection between the output and input voltages and currents;
APA, Harvard, Vancouver, ISO, and other styles
10

Sultanov, M. M., A. V. Strijichenko, and S. A. Yanchenko. "Analysis of the impact of non-sinusoidal voltage levels in the power grid of apartment buildings on the reliability and efficiency of transformers." Safety and Reliability of Power Industry 15, no. 4 (2023): 278–83. http://dx.doi.org/10.24223/1999-5555-2022-15-4-278-283.

Full text
Abstract:
The effects of mass implementation of energy-saving lighting on the permissible level of loading of the supply transformer were analyzed. The influence of non-sinusoidal voltages and currents on transformer wear was analyzed. Distortions of sinusoidal shape of voltages and currents lead to additional power losses in transformer. They cause heating of the insulation and windings of the transformer, increased losses and accelerated wear and tear. Higher harmonic components of voltage and current in a 0.4 kV network are caused by the presence of various energy-saving lighting lamps with non-linea
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Current voltage and power voltage characteristics"

1

Svrček, Milan. "Metody pro dosažení maximálního výkonu FV modulů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318171.

Full text
Abstract:
This diploma thesis deals with the tracking of the maximum power point for photovoltaic panels and the methods used to achieve it. On this basis, two methods were designed and programmed and subsequently tested on three types of photovoltaic panels. In conclusion methods were appraised.
APA, Harvard, Vancouver, ISO, and other styles
2

Ghasemi, Negareh. "Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers." Thesis, Queensland University of Technology, 2012. https://eprints.qut.edu.au/61091/1/Negareh_Ghasemi_Thesis.pdf.

Full text
Abstract:
The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied
APA, Harvard, Vancouver, ISO, and other styles
3

Шевченко, Сергій Юрійович. "Вплив вищих гармонік напруги на вибір та експлуатацію обмежувачів перенапруг для захисту систем електропостачання". Thesis, НТУ "ХПІ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/18478.

Full text
Abstract:
Дисертація на здобуття наукового ступеня доктора технічних наук за спецiальністю 05.09.03 - електротехнiчнi комплекси та системи. - Національний технічний університет "Харківський політехнічний інститут". Харків 2015 р. Дисертація присвячена актуальній науково-технічній проблемі визначення пливу вищих гармонік напруги на вибір та експлуатацію обмежувачів перенапруг для захисту електротехнічних комплексів та систем, що має важливе значення та забезпечує підвищення ефективності та надійності функціонування систем електропостачання. В рамках даного напряму отримані наступні результати. Виконано
APA, Harvard, Vancouver, ISO, and other styles
4

Шевченко, Сергій Юрійович. "Вплив вищих гармонік напруги на вибір та експлуатацію обмежувачів перенапруг для захисту систем електропостачання". Thesis, НТУ "ХПІ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/18479.

Full text
Abstract:
Дисертація на здобуття наукового ступеня доктора технічних наук за спецiальністю 05.09.03 - електротехнiчнi комплекси та системи. - Національний технічний університет "Харківський політехнічний інститут". Харків 2015 р. Дисертація присвячена актуальній науково-технічній проблемі визначення пливу вищих гармонік напруги на вибір та експлуатацію обмежувачів перенапруг для захисту електротехнічних комплексів та систем, що має важливе значення та забезпечує підвищення ефективності та надійності функціонування систем електропостачання. В рамках даного напряму отримані наступні результати. Виконано а
APA, Harvard, Vancouver, ISO, and other styles
5

Massi, Pavan Alessandro. "A hardware field simulator for photovoltaic materials applications." Doctoral thesis, Università degli studi di Trieste, 2008. http://hdl.handle.net/10077/2757.

Full text
Abstract:
2006/2007<br>Il presente lavoro riguarda la descrizione di un simulatore di campo fotovoltaico (in seguito simulatore). Il simulatore è un convertitore elettronico di potenza che, alimentato dalla rete elettrica, riproduce la caratteristica tensione corrente di un campo fotovoltaico (insieme di moduli fotovoltaici connessi in serie e in parallelo) operante in condizioni climatiche di temperatura e irraggiamento arbitrarie. Il nuovo dispositivo verrà impiegato nell’ambito del laboratorio fotovoltaico cui fa riferimento l’impianto in via di realizzazione sul tetto dell’edificio che ospita il
APA, Harvard, Vancouver, ISO, and other styles
6

Hölling, Matthias. "Adaptive current and voltage measurement device for low voltage distribution in power nets /." [S.l.] : [s.n.], 2000. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=13985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ren, Huilin. "Current Voltage Characteristics of a Semiconductor Metal Oxide Sensor." Fogler Library, University of Maine, 2001. http://www.library.umaine.edu/theses/pdf/RenH2001.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

McClusky, Scott Logan. "HIGH VOLTAGE RESONANT SELF-TRACKING CURRENT-FED CONVERTER." DigitalCommons@CalPoly, 2010. https://digitalcommons.calpoly.edu/theses/254.

Full text
Abstract:
High voltage power supply design presents unique requirements, combining safety, controllability, high performance, and high efficiencies. A new Resonant Self-Tracking Current-Fed Converter (RST-CFC) is investigated as a proof-of-concept of a high voltage power supply particularly for an X-ray system. These systems require fast voltage rise times and low ripple to yield a clear image. The proposed converter implements high-frequency resonance among discrete components and transformer parasitics to achieve high voltage gain, and the self-tracking nature ensures operation at maximum gain while p
APA, Harvard, Vancouver, ISO, and other styles
9

Špinar, Marek. "Ověření provozní výkonnosti a optimalizace FVE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241950.

Full text
Abstract:
The Master´s thesis deals with issues of operational performance of two photovoltaic power plants. In the thesis is stated the history of photovoltaics, description of photovoltaic effect, used materials and production technology of the most used material in PV industry – Silicon. The basic parts and parameters of photovoltaic power plant are described. Thesis also solves, how could be done the first and periodically control due to relevant directives. The ways of diagnostics potentional failures, methods of measuring and the exam of monitoring system are stated. Practice part is focused on me
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Wei. "Low Voltage High Current Power Conversion with Integrated Magnetics." Diss., Virginia Tech, 1998. http://hdl.handle.net/10919/30518.

Full text
Abstract:
Very low voltage, high current output requirement have necessitated improvements in power supply's density and efficiency. Existing power conversion techniques cannot meet very stringent size and efficiency requirements. By applying the proposed magnetic integration procedure, new integrated magnetic circuits featuring low loss, simple structure, and ripple cancellation technique are then developed to overcome the limitations of prior art. Both cores and windings are integrated. Consequently, the power loss and the size of the integrated magnetic device are greatly reduced. Detailed analysis
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Current voltage and power voltage characteristics"

1

Günther, Sinapius, Hoornaert Winfried, and Knovel (Firm), eds. Measuring current, voltage, and power. Elsevier, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

High voltage direct current transmission. 2nd ed. The Institution of Electrical Engineers, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

C, Guerrini Nicola, ed. Low-voltage low-power CMOS current conveyors. Kluwer Academic Publishers, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

United States. Bureau of Reclamation. Denver Office. Electric Power Branch., ed. Flatiron Powerplant automatic voltage regulator performance. U.S. Dept. of the Interior, Bureau of Reclamation, Denver Office, Research and Laboratory Services Division, Electric Power Branch, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Smith, Ryan M. Outdoor PV module degradation of current-voltage parameters: Preprint. National Renewable Energy Laboratory, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

IEEE Power Engineering Society. Substations Committee., IEEE Power Engineering Society. Transmission and Distribution Committee., IEEE Standards Board, and American National Standards Institute, eds. IEEE guide for specifications of high-voltage direct-current systems. Institute of Electrical and Electronics Engineers, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tanzawa, Toru. On-chip High-Voltage Generator Design. Springer New York, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yazdani, Amirnaser. Voltage-sourced converters in power systems: Modeling, control, and applications. IEEE Press/John Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yazdani, Amirnaser. Voltage-sourced converters in power systems: Modeling, control, and applications. IEEE Press/John Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

1955-, Iravani Reza, ed. Voltage-sourced converters in power systems: Modeling, control, and applications. Wiley, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Current voltage and power voltage characteristics"

1

Penin, A. "Quasi-resonant Voltage Converter with Self-limitation of Load Current. Similarity of Load Characteristics of Some Electronic Devices." In Power Systems. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-35366-7_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Penin, A. "Quasi-resonant Voltage Converter with Self-limitation of Load Current. Similarity of Load Characteristics of Some Electronic Devices." In Power Systems. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-28451-4_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Honjo, Shoichi, Yoshibumi Sato, and Yoshihisa Takahashi. "Numerical Analysis of AC Losses and Critical Current in High-Tc Superconductors with Power Law Current-Voltage Characteristics." In Advances in Superconductivity XII. Springer Japan, 2000. http://dx.doi.org/10.1007/978-4-431-66877-0_248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Persephonis, P., A. Ioannou, J. Parthenios, C. Georgiades, and V. Giannetas. "The time evolution of the electric characteristics of a laser discharge through their waveforms of the voltage and the current." In High Power Lasers — Science and Engineering. Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-015-8725-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Massarotti, Davide, and Francesco Tafuri. "Current–Voltage Characteristics." In Fundamentals and Frontiers of the Josephson Effect. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20726-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rüberg, Sven, Angelo L’Abbate, Gianluca Fulli, and Arturs Purvins. "High-Voltage Direct-Current Transmission." In Power Systems. Springer London, 2012. http://dx.doi.org/10.1007/978-1-4471-4549-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ibrahim, Nagwa F., and Sobhy S. Dessouky. "High-Voltage Direct Current Transmission." In Power Systems. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51661-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ismail, Yehea I., and Eby G. Friedman. "Mosfet Current T-Voltage Characteristics." In On-Chip Inductance in High Speed Integrated Circuits. Springer US, 2001. http://dx.doi.org/10.1007/978-1-4615-1685-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kories, Ralf, and Heinz Schmidt-Walter. "Current, Voltage and Power Measurement." In Electrical Engineering. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-55629-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gurija, G. T., Yu K. Krasnov, and S. K. Chamorovsky. "Current-Voltage Characteristics of the Bacteriorhodopsin." In Topics in Molecular Organization and Engineering. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3392-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Current voltage and power voltage characteristics"

1

Prasad, Miska, J. Munichandra Sekhar, and A. K. Akella. "Performance Comparison of Voltage Swell Characteristics in Power Distribution System." In 2018 International Conference on Current Trends towards Converging Technologies (ICCTCT). IEEE, 2018. http://dx.doi.org/10.1109/icctct.2018.8550838.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Djebarni, L., Y. Mebdoua, and H. Lahmar. "Calculation of DC arc plasma torch current-voltage characteristics." In 2013 IEEE Pulsed Power and Plasma Science Conference (PPPS 2013). IEEE, 2013. http://dx.doi.org/10.1109/ppc.2013.6627439.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fadhel, Siwar, Mohamed Trabelsi, Imen Bahri, Demba Diallo, and Mohamed Faouzi Mimouni. "Faults effects analysis in a photovoltaic array based on current-voltage and power-voltage characteristics." In 2016 17th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA). IEEE, 2016. http://dx.doi.org/10.1109/sta.2016.7952049.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zaputra, Satia. "Leakage current and partial discharge characteristics of epoxy resin material of distribution current transformer in salt fog pollutant condition." In 2017 International Conference on High-Voltage Engineering and Power Systems (ICHVEPS). IEEE, 2017. http://dx.doi.org/10.1109/ichveps.2017.8225900.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Modeling of components with nonlinear voltage current characteristics for harmonic studies." In 2004 IEEE Power Engineering Society General Meeting. IEEE, 2004. http://dx.doi.org/10.1109/pes.2004.1372920.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Yang, and Nirmal-Kumar C. Nair. "Determination of stressed system loadability based on current and voltage characteristics." In 2016 Australasian Universities Power Engineering Conference (AUPEC). IEEE, 2016. http://dx.doi.org/10.1109/aupec.2016.7749364.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

El-deen, S. Kamal, M. Abdel-Salam, and M. Th El-Mohandes. "Current-Voltage Characteristics of DC Corona in Hybrid Transmission Lines as Influenced by the Applied AC Voltage." In 2021 22nd International Middle East Power Systems Conference (MEPCON). IEEE, 2021. http://dx.doi.org/10.1109/mepcon50283.2021.9686221.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Suwarno. "Understanding of Outdoor Insulator Characteristics through Leakage Current and Electrical Equivalent Circuit." In 2021 3rd International Conference on High Voltage Engineering and Power Systems (ICHVEPS). IEEE, 2021. http://dx.doi.org/10.1109/ichveps53178.2021.9600915.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chenguo Yao, Zhongyong Zhao, Yu Chen, et al. "Detection of internal winding faults in power transformers based on graphical characteristics of voltage and current." In 2014 International Conference on High Voltage Engineering and Application (ICHVE). IEEE, 2014. http://dx.doi.org/10.1109/ichve.2014.7035475.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wei Sun, Yong Li, Dasheng Zeng, Runqiang Cai, Guoqing Yang, and Zhenglin Meng. "Investigation of voltage-current characteristics of ZnO varistors under 8/20µs impulse current." In 2011 IEEE Power Engineering and Automation Conference (PEAM). IEEE, 2011. http://dx.doi.org/10.1109/peam.2011.6135089.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Current voltage and power voltage characteristics"

1

Nguyen, Ruby, Mike Severson, Bo Zhang, et al. Electric Grid Supply Chain Review: Large Power Transformers and High Voltage Direct Current Systems. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1871501.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kuznetsov, Victor, Vladislav Litvinenko, Egor Bykov, and Vadim Lukin. A program for determining the area of the object entering the IR sensor grid, as well as determining the dynamic characteristics. Science and Innovation Center Publishing House, 2021. http://dx.doi.org/10.12731/bykov.0415.15042021.

Full text
Abstract:
Currently, to evaluate the dynamic characteristics of objects, quite a large number of devices are used in the form of chronographs, which consist of various optical, thermal and laser sensors. Among the problems of these devices, the following can be distinguished: the lack of recording of the received data; the inaccessibility of taking into account the trajectory of the object flying in the sensor area, as well as taking into consideration the trajectory of the object during the approach to the device frame. The signal received from the infrared sensors is recorded in a separate document in
APA, Harvard, Vancouver, ISO, and other styles
3

Luc, Brunet. Systematic Equations Handbook : Book 1-Energy. R&D Médiation, 2015. http://dx.doi.org/10.17601/rd_mediation2015:1.

Full text
Abstract:
The energy equation handbook is the complete collection of physically coherent expression of energy computed using from 2 to 7 physical units among: density(ML-3) energy (ML2T-2) time (T) force (MLT-2) power (ML2T-3) current (I) temperature (Th) quantity (N) mass (M) length (L) candela (J) surface (L2) volume (L3) concentration (ML-3) frequency (T-1) acceleration (LT- 2) speed (LT-1) pressure (ML-1T-2) viscosity (ML-1T-1) luminance (L- 2J) MolarMass (MN-1) MassicEnergy (L2T-2) resistance (ML2T-3I-2) voltage (ML2T-3I-1) Farad (M-1L-2T4I2) Thermal- Conductivity (MLT-3Th-1) SpecificHeat (L2T-2Th-
APA, Harvard, Vancouver, ISO, and other styles
4

Effect of Spark Discharge Duration and Timing on the Combustion Initiation in a Lean Burn SI Engine. SAE International, 2021. http://dx.doi.org/10.4271/2021-01-0478.

Full text
Abstract:
Meeting the increasingly stringent emission and fuel efficiency standards is the primary objective of the automotive research. Lean/diluted combustion is a promising avenue to realize high-efficiency combustion and reduce emissions in SI engines. Under the diluted conditions, the flame propagation speed is reduced because of the reduced charge reactivity. Enhancing the in-cylinder charge motion and turbulence, and thereby increasing the flame speed, is a possible way to harness the combustion process in SI engines. However, the charge motion can have a significant effect on the spark ignition
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!