Relevant bibliographies by topics / Cutting mode settings

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Cutting mode settings'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cutting mode settings.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cutting mode settings"

1

Domigata, Riga, Tri Bowo Indrato, Triana Rahmawati, and Narongrit Sanajit. "An Improved Power Management System in Electrosurgery Unit Monopolar Design." Indonesian Journal of electronics, electromedical engineering, and medical informatics 2, no. 2 (2020): 95–100. http://dx.doi.org/10.35882/ijeeemi.v2i2.6.

Full text
Abstract:
In using the Electrosurgery unit, improper power settings and modes can cause tissue damage, so it is necessary to adjust the cutting mode and power settings needed. The purpose of this research is to design power control and cutting mode in Electrosurgery using Arduino nano as a regulator of power and pulse or duty cycle. The contribution of this research is the creation of power control and mode in the Electrosurgery unit to increase power and cutting mode. This is to control the electrosurgery power. The LM2907 IC frequency to voltage circuit is used as a voltage regulator, which is issued
APA, Harvard, Vancouver, ISO, and other styles
2

Irianto, Bambang Guruh, Levana Forra Wakidi, Ade Ryan Endarta, Madeha Ishag Adam, and Hafsa Aamir. "A Low Cost Electrosurgery Unit (ESU) Design with Monopolar and Bipolar Methods." Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics 4, no. 2 (2022): 48–54. http://dx.doi.org/10.35882/ijeeemi.v4i2.1.

Full text
Abstract:
Surgery using a conventional scalpel causes the patient to lose a lot of blood; this needs to be avoided. The purpose of this research is to make a replacement for the conventional scalpel using a device that utilizes high frequency with a duty cycle setting that is centered at one point. The design of the device is equipped with monopolar and bipolar pulse selection with an increased frequency at 400 kHz, where the duty cycle of bipolar mode can be set to 100% on and the coagulation duty cycle is 6% on and 94% off. The power output of the module was tested using an ESU Analyzer, while cutting
APA, Harvard, Vancouver, ISO, and other styles
3

SENTHIL KUMAR, M., B. DHANASEKAR, G. RANGA JANARDHANA, S. PARAMASIVAM, and K. S. JAYA KUMAR. "COMPARISON OF MODELING TECHNIQUES FOR SELECTING OPTIMIZED AND AUTOMATED PLASMA CUTTING PROCESS PARAMETERS." International Journal of Modeling, Simulation, and Scientific Computing 03, no. 03 (2012): 1250011. http://dx.doi.org/10.1142/s1793962312500110.

Full text
Abstract:
The advancement in technologies made the entire manufacturing system, to be operated with more efficient, flexible, user friendly, more productive and cost effective. One such a system to be focused for advancement is plasma cutting system, which has wider industrial applications. There are many researches pursuing at various area of plasma cutting technology, still the automated and optimized parameters value selection is challenging. The work is aimed to eliminate the manual mode of feeding the input parameters for cutting operation. At present, cutting parameters are fed by referring the pa
APA, Harvard, Vancouver, ISO, and other styles
4

Grubyi, S. V. "A Method for Calculating the Output Indicators of Turning." Proceedings of Higher Educational Institutions. Маchine Building, no. 9 (714) (September 2019): 26–34. http://dx.doi.org/10.18698/0536-1044-2019-9-26-34.

Full text
Abstract:
Rate of wear, tool life, cutting force and cutting temperature belong to output indicators of turning. To study and analyze these indicators, experimental studies are traditionally used, which require considerable material, financial and time resources. Reference literature and scientific publications contain power functions generalizing the results of experimental research on allowable cutting speeds, the main component of force and the torque. These functions reflect the limited conditions with regard to tool and workpiece materials and are true for tools without wear. A method for calculati
APA, Harvard, Vancouver, ISO, and other styles
5

Xu, Hu Ming, Jin Yuan Tang, and Xuan Tao. "Dynamic Analyses of the Structure of the Horizontal Broaching Machine Based on Software of ANSYS." Applied Mechanics and Materials 268-270 (December 2012): 910–15. http://dx.doi.org/10.4028/www.scientific.net/amm.268-270.910.

Full text
Abstract:
The 3D model of a horizontal broaching machine is built in inventor, and the first ten natural frequencies and mode of vibration are obtained by the software of ANSYS. Dynamic response of the whole machine is also calculated in ANSYS, the weak link of the dynamic performance of the whole machine is found combined with the result of modal analyses, consequently, settings of the cutting speed and the improvement for the structure are provided.
APA, Harvard, Vancouver, ISO, and other styles
6

Setiawan, Muhammad Roni, Tri Bowo Indrato, Triana Rahmawati, and Bedjo Utomo. "Utilization of Power Setting in Mono-polar Electrosurgery Unit With Additional Blend Modes." Indonesian Journal of electronics, electromedical engineering, and medical informatics 2, no. 2 (2020): 101–6. http://dx.doi.org/10.35882/ijeeemi.v2i2.7.

Full text
Abstract:
Electrosurgery unit has the purpose of damaging certain body tissues by heating the tissue. In this study there are several modes and also power selection. The contribution of this research is to design the power management and also the addition of several modes for the surgical process. Electrosurgery Unit involves the use of IC CMOS 4069 as a frequency generator. The frequency output is set at 250 KHz and then passed on to the pulse regulator circuit and controlled by using Arduino and then forwarded to the inverter circuit which functions to increase the voltage and output in the form of po
APA, Harvard, Vancouver, ISO, and other styles
7

Setiawan, Muhammad Roni, Tri Bowo Indrato, and Triana Rahmawati. "Utilization of Power Setting in Monopolar Electrosurgery Unit With Additional Blend Modes." Indonesian Journal of electronics, electromedical engineering, and medical informatics 2, no. 3 (2020): 130–36. http://dx.doi.org/10.35882/ijeeemi.v2i3.4.

Full text
Abstract:
Electrosurgery unit has the purpose of damaging certain body tissues by heating the tissue. In this study there are several modes and also power selection. The contribution of this research is to design the power management and also the addition of several modes for the surgical process. Electrosurgery Unit involves the use of IC CMOS 4069 as a frequency generator. The frequency output is set at 250 KHz and then passed on to the pulse regulator circuit and controlled by using Arduino and then forwarded to the inverter circuit which functions to increase the voltage and output in the form of po
APA, Harvard, Vancouver, ISO, and other styles
8

Yu Nikolaev, A. "Effect of vibrations on the residual stress field formation during milling of high-strength aluminum alloys." Journal of Physics: Conference Series 2094, no. 4 (2021): 042026. http://dx.doi.org/10.1088/1742-6596/2094/4/042026.

Full text
Abstract:
Abstract The authors examine the influence of high-speed milling on the distribution of residual stresses in parts made of structural high-strength aluminum alloys Al-Cu-Mg, which are the main structural materials in the aerospace industry. Milling was carried out at high cutting speeds. Different tool settings were used to balance the instrument. Plastic deformation occurred in the part’s surface layers. Residual stresses were measured by the X-ray method. It was found that high-speed milling creates residual compressive stresses that are favorable for the operation of the part. The depth of
APA, Harvard, Vancouver, ISO, and other styles
9

Syroid, Yevhenii, Oleksandr Tolkach, Andrii Sydorenko, Oleksandr Kuznetsov, and Dmytrii Bilobrov. "OPTIMIZATION OF OPERATING PARAMETERS OF DIAMOND WIRE SAWING FOR ENHANCING NATURAL STONE EXTRACTION EFFICIENCY." JOURNAL of Donetsk mining institute 55, no. 2 (2024): 113–21. https://doi.org/10.31474/1999-981x-2024-2-113-121.

Full text
Abstract:
Objective. The aim of the study is to improve the efficiency of natural stone cutting processes using diamond wire saw machines in quarries by optimizing operating parameters, particularly current strength. This will help reduce diamond wire wear, enhance cutting productivity, and decrease energy costs, ensuring the stability and economic viability of stone extraction processes. Methodology. The study was conducted at the Leznykiv Block Quarry using the MKS-55 diamond wire saw machine, whose main parameters include a main drive power of 55 kW, wire speed up to 40 m/s, and a wire length from 20
APA, Harvard, Vancouver, ISO, and other styles
10

Rasaq Adebayo, Kazeem, Jen Tien-Chien, Akinlabi Esther Titilayo, and Akinlabi Esther Titilayo. "Influence of Mango Seed Oil on Surface Roughness and Cutting Temperature During Sustainable Turning of AISI 1525 Steel Under Minimum Quantity Lubrication Environment." E3S Web of Conferences 552 (2024): 01073. http://dx.doi.org/10.1051/e3sconf/202455201073.

Full text
Abstract:
Mineral oil-based cutting fluids have several mechanical advantages. The use of mineral oil has been questioned due to its adverse effect on machinists and the environment. There is need for a sustainable and biodegradable cutting fluid that can perform the task of problematic mineral oil. This study considered a non-edible vegetable oil, mango oil, as a lubricant in the turning operation of AISI 1525 steel using an MQL mode of fluid application. The performance of mango oil was compared with commercial mineral oil using SR and CT as performance metrics. Experiments were conducted under three
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Cutting mode settings"

1

Юнак, Анна Сергіївна, Анна Сергеевна Юнак, Anna Serhiivna Yunak, Костянтин Олександрович Дядюра, Константин Александрович Дядюра та Kostiantyn Oleksandrovych Diadiura. "Підвищення ефективності обробки різанням високоміцного зносостійкого чавуну". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38171.

Full text
Abstract:
На підставі аналізу літературних даних та власних досліджень автора викладено існуючі уявлення про структурні особливості високоміцних зносостійких чавунів. Розглянуто вплив хімічного складу і структури на механічні та експлуатаційні властивості чавунів, їх оброблюваність різанням. Розглянуті питання формування фізико-механічного стану поверхневого шару заготовок із високоміцного зносостійкого чавуну (шорсткість, наклеп, залишкові напруги) і його вплив на експлуатаційні характеристики деталей. Показано, що основні властивостей високоміцного зносостійкого чавуну обумовлений високим вмістом
APA, Harvard, Vancouver, ISO, and other styles
2

Цьонь, Олег Петрович, та O. P. Tsion. "Удосконалення конструкції дообрізувача гички цукрових буряків активного типу". Thesis, Тернопільський національний технічний університет ім. Івана Пулюя, 2014. http://elartu.tntu.edu.ua/handle/123456789/5432.

Full text
Abstract:
Робота виконана у Тернопільському національному технічному університеті імені Івана Пулюя Міністерства освіти і науки України. Захист відбувся “ 27 ” січня 2015 року о “ 14 ” годині на засіданні спеціалізованої вченої ради Д 58.052.02 в Тернопільському національному технічному університеті імені Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56, аудиторія 79.<br>Удосконалення конструктивної схеми доочисника головок коренеплодів, який забезпечує підвищення показників надійності та якості виконання технологічного процесу, можливо досягти шляхом розроблення гичкозрізуючого пристро
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Cutting mode settings"

1

Papaconstantinou, George A. Financial Market Infrastructure and Economic Integration. Hart Publishing, 2024. http://dx.doi.org/10.5040/9781509966783.

Full text
Abstract:
This book is the first comprehensive study of the interplay between the cutting-edge regulation of financial infrastructure and international economic integration. It tackles a series of important questions: How does the regulation of central counterparties interact with international economic law? Is the WTO able to deal with the regulatory diversity of each country’s financial rulebook? Do FTAs foster deeper integration of financial infrastructure services? Can competition law effectively tackle monopolisation and anticompetitive conduct in financial infrastructure? The book discusses how th
APA, Harvard, Vancouver, ISO, and other styles
2

Habert, Mireille. Montaigne, Translator of Raymond Sebond. Edited by Philippe Desan. Oxford University Press, 2016. http://dx.doi.org/10.1093/oxfordhb/9780190215330.013.5.

Full text
Abstract:
Published in 1569, eleven years before the Essays came out, Natural Theology is the first printed work signed by the hand of Montaigne. It is not his own creation but a translation into French of a lengthy volume written in Latin around 1430 at the University of Toulouse by theologian Raymond Sebond. This translation was, for a long time, considered to be a simple stylistic exercise. Montaigne himself never professed to have done more than gain the satisfaction of succeeding at “cutting out and setting forth with [his] hand a French costume for the Spanish theologian and philosopher.” However,
APA, Harvard, Vancouver, ISO, and other styles
3

Hartigan-O'Connor, Ellen, and Lisa G. Materson, eds. The Oxford Handbook of American Women's and Gender History. Oxford University Press, 2018. http://dx.doi.org/10.1093/oxfordhb/9780190222628.001.0001.

Full text
Abstract:
The Oxford Handbook of American Women’s and Gender History boldly interprets the history of diverse women and how ideas about gender shaped their access to political and cultural power in North America over six centuries. In twenty-nine chapters, the Handbook showcases women’s and gender history as an integrated field with its own interpretation of the past, focused on how gender influenced people’s lives as they participated in migration, colonialism, trade, warfare, artistic production, and community building. Organized chronologically and thematically, the Handbook’s six sections allow read
APA, Harvard, Vancouver, ISO, and other styles
4

Tobin, Kenneth. Teaching and Learning Science. Praeger, 2006. http://dx.doi.org/10.5040/9798216190608.

Full text
Abstract:
Teaching and Learning Scienceis a two-volume set that consists of 66 chapters written by more than 90 leading educators and scientists. The volumes are informed by cutting-edge theory and research and address numerous issues that are central to K-12 education. This resource will be particularly valuable for parents and teachers as schools around the country prepare students to meet the challenges presented when science is added to the No Child Left Behind Act in 2007. These insightful contributions touch on many of the most controversial topics facing science educators and students today, incl
APA, Harvard, Vancouver, ISO, and other styles
5

Amar, A. D. Managing Knowledge Workers. Praeger, 2001. http://dx.doi.org/10.5040/9798400682254.

Full text
Abstract:
With the emergence of a powerful new breed of organization--the knowledge organization--comes a bold new challenge to the old ways of managing people. Workers with special cutting-edge knowledge and the ability to transform it into marketable goods and services can not be managed the old command-and-control way, nor even by some of the more enlightened ways developed since then. Only new ways, and old ways updated and adapted to special new situations, can work. Only in this way can innovation and productivity--the crucial ingredients for success in knowledge-based organizations--be harnessed.
APA, Harvard, Vancouver, ISO, and other styles
6

Eerdmans Commentary on the Bible. Wm. B. Eerdmans, 2003. http://dx.doi.org/10.5040/bci-001a.

Full text
Abstract:
No one familiar with the Bible needs to be told that it is a truly remarkable work. But it takes help to understand this ancient collection of diverse forms of literature written by different people across many centuries. The Eerdmans Commentary on the Bible (The ECB) is the finest, most up-to-date single-volume Bible handbook now available. Written by world-class Bible scholars, The ECB encapsulates in non-technical language the best of modern scholarship on the sixty-six biblical books plus the Apocrypha. The only one-volume Bible commentary to cover all the texts (even including 1 Enoch) re
APA, Harvard, Vancouver, ISO, and other styles
7

Jiménez, Catalina, Julen Requejo, Miguel Foces, Masato Okumura, Marco Stampini, and Ana Castillo. Silver Economy: A Mapping of Actors and Trends in Latin America and the Caribbean. Inter-American Development Bank, 2021. http://dx.doi.org/10.18235/0003237.

Full text
Abstract:
Latin America and the Caribbean, unlike other regions, is still quite young demographically: people over age 60 make up around 11% of the total population. However, the region is expected to experience the fastest rate of population aging in the world over the coming decades. This projected growth of the elderly population raises challenges related to pensions, health, and long-term care. At the same time, it opens up numerous business opportunities in different sectorshousing, tourism, care, and transportation, for examplethat could generate millions of new jobs. These opportunities are terme
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Cutting mode settings"

1

Khelil, Alla Eddine, and Sara Khelil. "Evaluation and Optimization of Daylighting in Classroom Environments." In Proceedings in Technology Transfer. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-8588-9_40.

Full text
Abstract:
Abstract In educational settings, the quality of lighting plays a crucial role in creating conducive learning environments. This study focuses on the evaluation and optimization of daylighting in a classroom setting, aiming to enhance the visual comfort and well-being of students and educators. The research employs a comprehensive approach, integrating quantitative method to assess the existing daylighting conditions and subsequently applying optimization techniques for improved lighting performance. The evaluation phase involves a detailed analysis of the current daylighting levels, taking in
APA, Harvard, Vancouver, ISO, and other styles
2

Smite, Darja, and Nils Brede Moe. "Defining a Remote Work Policy: Aligning Actions and Intentions." In Agile Processes in Software Engineering and Extreme Programming – Workshops. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-48550-3_15.

Full text
Abstract:
AbstractAfter the long period of forced work from home, many knowledge workers have not only developed a strong habit of remote work, but also consider flexibility as their personal right and no longer as a privilege. Existing research suggest that the majority prefers to work two or three days per week from home and are likely to quit or search for a new job if forced to return to full time office work. Given these changes, companies are challenged to alter their work policies and satisfy the employee demands to retain talents. The subsequent decrease in office presence, also calls for transf
APA, Harvard, Vancouver, ISO, and other styles
3

Fulford, Bill. "Linking Science with People: An Introduction to Part IV, Science." In International Perspectives in Values-Based Mental Health Practice. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47852-0_24.

Full text
Abstract:
AbstractThis chapter outlines how the contributions to this Part illustrate the role of a culturally enriched model of values-based practice in linking science with people. Chapters 25, “A Cross-Cultural Values-Based Approach to the Diagnosis and Treatment of Dissociative (Conversion) Disorders,” 26, “Treatment of Social Anxiety Disorder or Neuroenhancement of Socially Accepted Modesty? The Case of Ms. Suzuki,” 27, “Nontraditional Religion, Hyper-religiosity, and Psychopathology: The Story of Ivan from Bulgaria,” and 28, “Journey into Genes: Cultural Values and the (Near) Future of Genetic Cou
APA, Harvard, Vancouver, ISO, and other styles
4

Lockner, Yannik, Paul Buske, Maximilian Rudack, et al. "Improving Manufacturing Efficiency for Discontinuous Processes by Methodological Cross-Domain Knowledge Transfer." In Internet of Production. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-98062-7_8-1.

Full text
Abstract:
AbstractDiscontinuous processes face common tasks when implementing modeling and optimization techniques for process optimization. While domain data may be unequal, knowledge about approaches for each step toward the solution, e.g., data gathering, model reduction, and model optimization, may be useful across different processes. A joint development of methodologies for machine learning methods, among other things, ultimately supports fast advances in cross-domain production technologies. In this work, an overview of common maturation stages of data-intensive modeling approaches for production
APA, Harvard, Vancouver, ISO, and other styles
5

Lockner, Yannik, Paul Buske, Maximilian Rudack, et al. "Improving Manufacturing Efficiency for Discontinuous Processes by Methodological Cross-Domain Knowledge Transfer." In Internet of Production. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-44497-5_8.

Full text
Abstract:
AbstractDiscontinuous processes face common tasks when implementing modeling and optimization techniques for process optimization. While domain data may be unequal, knowledge about approaches for each step toward the solution, e.g., data gathering, model reduction, and model optimization, may be useful across different processes. A joint development of methodologies for machine learning methods, among other things, ultimately supports fast advances in cross-domain production technologies. In this work, an overview of common maturation stages of data-intensive modeling approaches for production
APA, Harvard, Vancouver, ISO, and other styles
6

Wen, Quan, Abdul Aziz Zalay, Bin Huang, Azhari Md Hashim, and Wei Lun Wong. "Enhancing Life Still Sketch Skills Through Virtual Reality Technology." In Embracing Cutting-Edge Technology in Modern Educational Settings. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-1022-9.ch010.

Full text
Abstract:
This study addresses a significant gap in research concerning the utilization of virtual reality (VR) technology within higher education in China. Focusing on Mianyang Teachers' College in Sichuan, the research explores the potential integration of VR into the practice of life still sketching. Using a qualitative case study approach, ten experts, comprising five in life still sketching and five in VR technology, were interviewed. Thematic analysis of the data revealed that life still sketching is viewed as a highly subjective mode of artistic expression, emphasizing adherence to fundamental ae
APA, Harvard, Vancouver, ISO, and other styles
7

Jiayuan, Su, and Zhang Jingru. "Promoting Critical Thinking Disposition Through Virtual Reality Serious Games." In Embracing Cutting-Edge Technology in Modern Educational Settings. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-1022-9.ch005.

Full text
Abstract:
The new VR technology is used in various fields such as medicine, military, and especially in education. A teaching methodology based on logical reasoning in a serious virtual reality game was designed and developed in the study. Through a pre-test and post-test laboratory experiment approach, the California Critical Thinking Disposition Questionnaire was used to detect changes in critical thinking dispositions of a class of 37 students including experimental and control groups. The experimental data were analysed for component gaps by means of independent samples t-tests. Ultimately, through
APA, Harvard, Vancouver, ISO, and other styles
8

Tran, Minh Tung, Thu Trinh Thi, and Lan Duong Hoai. "Exploiting Simulation Games to Teach Business Program." In Embracing Cutting-Edge Technology in Modern Educational Settings. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-1022-9.ch007.

Full text
Abstract:
The research goal was to present an organized overview of literature related to games-based learning as a tool for improving the excellence and distinctiveness of the teaching courses as a whole and, specifically, hotel management teaching, which provided the significance of problems within higher education. The research essentially sought out the most acceptable teaching resources on games-based application. The project's empirical evaluation based on the games assigned to business students at FPT university, together with their qualitative and quantitative surveys, produced incredibly signif
APA, Harvard, Vancouver, ISO, and other styles
9

Alkasirah, Nurul Azni Mhd, Mariam Mohamad, Mageswaran Sanmugam, Girija Ramdas, and Khairulnisak Mohamad Zaini. "Examining the Validity and Reliability of the Arabic Vocabulary Achievement Instrument to Evaluate a Digital Storytelling-Based Application." In Embracing Cutting-Edge Technology in Modern Educational Settings. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-1022-9.ch012.

Full text
Abstract:
Vocabulary has been recognized as crucial for students who learn Arabic as a foreign language. Students need more Arabic vocabulary to acquire Arabic language skills. This present study was concerned with developing and assessing the content validity of an Arabic vocabulary achievement instrument for digital storytelling-based application. The instrument developed consisted of 40 items. 12 experts in the Arabic field determined the content validity scale of the instrument. This instrument was then administered to 40 Malaysian secondary school students. The result showed high content validity a
APA, Harvard, Vancouver, ISO, and other styles
10

Zaini, Khairulnisak Mohamad, Rozniza Zaharudin, and Aznan Che Ahmad. "The Development of an Educational Mobile Application for Malaysian Sign Language." In Embracing Cutting-Edge Technology in Modern Educational Settings. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-1022-9.ch011.

Full text
Abstract:
In an increasingly connected world, the development of technology has been instrumental in breaking down barriers and fostering communication between diverse groups. One such group that has benefited from technological advancement is the Deaf and hard-of-hearing (D/HH) community, which communicates using sign language. Sign language, a rich and expressive form of communication, communicates visually using the hands, arms, face, and upper body to produce signs. However, there is a lack of teaching and learning resources to assist the deaf community and those interested in learning sign language
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cutting mode settings"

1

Tolentino, Andrew A., Mark Christian E. Manuel, and Reylina Garcia Tayactac. "Optimization of Helical Gear Plunge Shaving Cutting Parameters for Cutter Life Using Taguchi Method." In 2024 8th International Conference on Materials Engineering and Nano Sciences & 2024 8th International Conference on Material Engineering and Manufacturing. Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-wj0hyg.

Full text
Abstract:
Gear shaving is a vital part of gear tooth finishing during the pre-hardened condition. Taguchi method was used to design a technique on selecting optimum gear cutting parameters, and on setting a standard in process programming of MHI FEN30A 4-axis shaving machine, for shaving of SCM20H material helical gear using plunge pattern. The final cutting stock, final feed rate and spindle speed were selected as the shaving parameters. Many experiments were conducted using the L16 orthogonal array. S/N response table shows the optimum cutting parameter combinations for cutting load, cutting time, and
APA, Harvard, Vancouver, ISO, and other styles
2

Popescu, Gheorghe h., and Ana maria Chiseganegrila. "THE PEDAGOGICAL EFFECTIVENESS OF BLENDED LEARNING IN HIGHER EDUCATION." In eLSE 2017. Carol I National Defence University Publishing House, 2017. http://dx.doi.org/10.12753/2066-026x-17-032.

Full text
Abstract:
We rely on Vaughan et al. (2013) to prove that the transformative cutting edge of virtual communication and online learning communities generates novel manners for teachers and learners to participate, cooperate, and be instrumental in learning. The innovative learning setting, when associated with face-to-face reciprocal actions, demands relevant role alterations and the requirement to grasp the notion of teaching presence for inherent and valid learning outcomes. Information and communications technology supply the chance to constitute communities of individuals that back commitment and team
APA, Harvard, Vancouver, ISO, and other styles
3

Bei, Xiaohui, Ning Chen, Guangda Huzhang, Biaoshuai Tao, and Jiajun Wu. "Cake Cutting: Envy and Truth." In Twenty-Sixth International Joint Conference on Artificial Intelligence. International Joint Conferences on Artificial Intelligence Organization, 2017. http://dx.doi.org/10.24963/ijcai.2017/507.

Full text
Abstract:
We study envy-free cake cutting with strategic agents, where each agent may manipulate his private information in order to receive a better allocation. We focus on piecewise constant utility functions and consider two scenarios: the general setting without any restriction on the allocations and the restricted setting where each agent has to receive a connected piece. We show that no deterministic truthful envy-free mechanism exists in the connected piece scenario, and the same impossibility result for the general setting with some additional mild assumptions on the allocations. Finally, we stu
APA, Harvard, Vancouver, ISO, and other styles
4

"Frequency Conversion Technology for Air Compressor Speed Control System Design: A Comprehensive Approach." In International Conference on Cutting-Edge Developments in Engineering Technology and Science. ICCDETS, 2024. http://dx.doi.org/10.62919/nhvi9047.

Full text
Abstract:
Frequency conversion technology plays a pivotal role in optimizing air compressor speed control systems, significantly enhancing their efficiency, reliability, and energy consumption. This research paper presents a comprehensive study on the design and implementation of frequency conversion technology for air compressor speed control systems. The study explores the fundamental principles of frequency conversion, evaluates current technological advancements, and discusses practical applications in industrial settings. Key components such as variable frequency drives (VFDs), control algorithms,
APA, Harvard, Vancouver, ISO, and other styles
5

Kumar, Pawan, Uma Yadav, Namrata Bansal, and Javalkar Dinesh Kumar. "Navigating Challenges in Industrial Automation with Internet of Things: Technical Solutions." In International Conference on Cutting-Edge Developments in Engineering Technology and Science. ICCDETS, 2024. http://dx.doi.org/10.62919/uieu2362.

Full text
Abstract:
The utilization of the Internet of Things (IoT) to enhance connectivity among objects, services, and individuals for smarter operational management has been explored and implemented across various sectors including smart cities, energy management, healthcare, food and water supply, logistics, retail, and transportation. However, the application of IoT in the industrial automation sector is less documented, especially concerning its capacity for reliable and collaborative operations. This includes the challenges of fostering scalable interactions among diverse devices and systems, ensuring pred
APA, Harvard, Vancouver, ISO, and other styles
6

Shih, Yi-Pei, Bor-Tyng Sheen, Yu-Hsien Wei, and Bo-Lin Wei. "Simulation of Cutting Face-Hobbed Bevel Gears Based on a Ring-Dexel Model." In ASME 2024 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/detc2024-142219.

Full text
Abstract:
Abstract The face hobbing method, renowned for its high precision and production efficiency, is a primary technique for mass-producing hypoid gears in automatic industrial applications. This method can be implemented effectively on a modern six-axis CNC bevel gear-cutting machine. However, due to the complicated machining movement of multiple nonlinear axes, it is challenging but essential to conduct cutting simulations to validate the accuracy of the given machining positions. Even some commercial software can do cutting simulations for face hobbing machining; the settings are very complicate
APA, Harvard, Vancouver, ISO, and other styles
7

Hassan, Raed, Robert B. Jerard, Barry K. Fussell, Firat Eren, and Donald M. Esterling. "Statistical Analysis of Variations in Model Predicted Cutting Forces for End Milling." In ASME 2009 International Manufacturing Science and Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/msec2009-84367.

Full text
Abstract:
This paper quantifies statistical variations in model predicted machining forces while cutting aluminum, carbon steel, stainless steel and titanium. An accurate estimate of the variability is essential for use in process planning to determine appropriate factors of safety when setting cutting conditions that are both safe and efficient. A linear regression is performed to estimate the coefficients of a tangential cutting force model. Density ellipses are used to define the confidence limits of the coefficients under varying spindle speeds and radial immersions. The locus of coefficients at the
APA, Harvard, Vancouver, ISO, and other styles
8

Nishiyama, Mamoru, Ryuta Sato, and Keiichi Shirase. "3D Model Construction of Cutting Tools and Identification of Workpieces Using Machine Vision for Virtual Machining Simulation." In ASME/ISCIE 2012 International Symposium on Flexible Automation. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/isfa2012-7204.

Full text
Abstract:
In virtual machining simulation to verify NC programs for machining operation, construction of 3D (three-dimensional) models of cutting tools to be used and identification of posture and position of workpiece to be machined are quite important to achieve reliable verification. Especially, a 3D model construction of cutting tools requires skill-full operations and it takes much time and cost. Several geometric parameters to define cutting tool shapes are needed to construct precise 3D models for virtual machining simulation. Even though, careless mistake to set parameters of tool diameter and l
APA, Harvard, Vancouver, ISO, and other styles
9

Bardetsky, Alexander, Helmi Attia, and Mohamed Elbestawi. "A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High Speed Machining of Aluminum Cast Alloys: Part 1 — Model Development." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80620.

Full text
Abstract:
The analysis of the mechanism of cutting tool wear in high speed machining of cast aluminum alloys is conducted in this research work. The result of analysis indicates that the interaction between the hard silicon constituencies of the alloy and the surface of the cutting tool is the most detrimental to tool life. The wear of the cutting tool in such interactions, governed by fatigue wear mechanism, is directly proportional to silicon content of the alloy, silicon grain size and to the tool’s loading conditions. In order to predict the tool wear in machining aluminum cast alloys, a new wear mo
APA, Harvard, Vancouver, ISO, and other styles
10

Juschanin, Denis, Fisseha M. Alemayehu, and Stephen Ekwaro-Osire. "Low Frequency Vibration Consideration in Tool-Path Computation of Two-Link Serial Manipulator for Improved Accuracy." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-39400.

Full text
Abstract:
Industrial robots are flexible and cost-efficient tools for a multitude of applications such as, polishing, grinding, deburring, and welding. However, their utilization in machining tasks is currently limited due to insufficient position accuracy. This study aims to answer the research question: ‘Does including low frequency vibrations (mode coupling chatter) in tool path computation improve accuracy?’ For this purpose, the current paper focuses on setting-up a robust and flexible simulation framework. The framework implements a predictive cutting force method into a multibody dynamic (MBD) mo
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cutting mode settings"

1

Baral, Aniruddha, Jeffrey Roesler, M. Ley, et al. High-volume Fly Ash Concrete for Pavements Findings: Volume 1. Illinois Center for Transportation, 2021. http://dx.doi.org/10.36501/0197-9191/21-030.

Full text
Abstract:
High-volume fly ash concrete (HVFAC) has improved durability and sustainability properties at a lower cost than conventional concrete, but its early-age properties like strength gain, setting time, and air entrainment can present challenges for application to concrete pavements. This research report helps with the implementation of HVFAC for pavement applications by providing guidelines for HVFAC mix design, testing protocols, and new tools for better quality control of HVFAC properties. Calorimeter tests were performed to evaluate the effects of fly ash sources, cement–fly ash interactions, c
APA, Harvard, Vancouver, ISO, and other styles
2

Baral, Aniruddha, Jeffery Roesler, and Junryu Fu. Early-age Properties of High-volume Fly Ash Concrete Mixes for Pavement: Volume 2. Illinois Center for Transportation, 2021. http://dx.doi.org/10.36501/0197-9191/21-031.

Full text
Abstract:
High-volume fly ash concrete (HVFAC) is more cost-efficient, sustainable, and durable than conventional concrete. This report presents a state-of-the-art review of HVFAC properties and different fly ash characterization methods. The main challenges identified for HVFAC for pavements are its early-age properties such as air entrainment, setting time, and strength gain, which are the focus of this research. Five fly ash sources in Illinois have been repeatedly characterized through x-ray diffraction, x-ray fluorescence, and laser diffraction over time. The fly ash oxide compositions from the sam
APA, Harvard, Vancouver, ISO, and other styles
3

Baliki, Ghassan, Dorothee Weiffen, Melodie Al Daccache, et al. Seeds for recovery: The long-term impacts of a complex agricultural intervention on welfare, behaviour and stability in Syria (SEEDS). Centre for Excellence and Development Impact and Learning (CEDIL), 2023. http://dx.doi.org/10.51744/crpp7.

Full text
Abstract:
There is scarce evidence on whether and how assistance in humanitarian emergencies and conflict settings impacts household well-being and behaviour. Conducting rigorous impact evaluations in such settings poses multiple challenges in design and data collection. In SEEDS, we evaluate the impact of a complex large-scale multi-arm agricultural intervention on productivity, food security, and resilience in the context of an on-going humanitarian crisis in Syria. Specifically, we identify the causal impacts of agricultural asset transfers over various time horizons (the short-, medium-, and long-ru
APA, Harvard, Vancouver, ISO, and other styles
4

Pak, Kimchoeun. Fiscal Decentralisation in Cambodia: A Review of Progress and Challenges. Cambodia Development Resource Institute, 2011. https://doi.org/10.64202/wp.50.201105.

Full text
Abstract:
To achieve democratic development, Cambodia’s next step towards fiscal decentralisation will focus on both institutional and service delivery reform at district level so as to strengthen the capacity of the sub-national administration and better link it to sectoral service delivery. To move forwards, fiscal decentralisation needs to be comprehensive and well coordinated with other cross-cutting reforms, especially the Public Financial Management Reform Programme, and sectoral reforms. This does not mean that everything has to be done at the same time, for doing so would overwhelm existing capa
APA, Harvard, Vancouver, ISO, and other styles
5

Brown, Dustin, Jitinder Kohli, and Samantha Mignotte. TOOLS AT THE CENTRE OF GOVERNMENT:RESEARCH AND PRACTITIONERS' INSIGHTS. People in Government Lab, 2021. http://dx.doi.org/10.35489/bsg-peoplegov-ri_2021/002.

Full text
Abstract:
In this paper, the authors look at how the 'centre of government' (defined as "the people and organisations that support the head of government as the ‘guardians of overall strategic direction of government’, which often includes the president’s or prime minister’s offices as well as Cabinet, budget offices, etc") can add value from their position and with the tools available to them. The COVID-19 pandemic has highlighted the critical role not just of government generally, but in particular the essential role the centre of government must play to coordinate, communicate with the public, and na
APA, Harvard, Vancouver, ISO, and other styles
6

Veung, Naron, and Seyhah Ven. Exploring Insights into Vocational Skills Development and Industrial Transformation in Cambodia. Cambodia Development Resource Institute, 2021. https://doi.org/10.64202/wp.131.202110.

Full text
Abstract:
Industrial development is central to Cambodia’s economic development as it plans to upgrade the country’s status to an upper-middle-income country by 2030 and to a high-income country by 2050. Equipping the workforce with the skills and competencies that match industrial needs requires a great deal of continuous efforts and resources. In this regard, this paper aims to look into the linkage between skills and transformation based on employers’ perspectives. It explores insights into how companies perceive and use the skills and qualifications of their employees to overcome changes in technolog
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cutting mode settings' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography